Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Sean Paul <seanpaul@chromium.org>,
	Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Konstantin Sudakov <k.sudakov@integrasources.com>,
	bbrezillon@kernel.org, dri-devel@lists.freedesktop.org,
	Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Jagan Teki <jagan@openedev.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 7/8] drm/sun4i: dsi: Add burst support
Date: Mon, 11 Feb 2019 15:41:28 +0100
Message-ID: <1dcabf2b38d3f0d3387b1cf02575e3d14e3ecd4e.1549896081.git-series.maxime.ripard@bootlin.com> (raw)
In-Reply-To: <cover.f28d9994585553a089a519392616b0d26ed54af1.1549896081.git-series.maxime.ripard@bootlin.com>

From: Konstantin Sudakov <k.sudakov@integrasources.com>

The current driver doesn't support the DSI burst operation mode.

Let's add the needed quirks to make it work.

Signed-off-by: Konstantin Sudakov <k.sudakov@integrasources.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 171 ++++++++++++++++++++------
 1 file changed, 132 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index e0288e7dc64e..4cb715dc9100 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -23,7 +23,9 @@
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_panel.h>
 
+#include "sun4i_crtc.h"
 #include "sun4i_drv.h"
+#include "sun4i_tcon.h"
 #include "sun6i_mipi_dsi.h"
 
 #include <video/mipi_display.h>
@@ -32,6 +34,8 @@
 #define SUN6I_DSI_CTL_EN			BIT(0)
 
 #define SUN6I_DSI_BASIC_CTL_REG		0x00c
+#define SUN6I_DSI_BASIC_CTL_TRAIL_INV(n)		(((n) & 0xf) << 4)
+#define SUN6I_DSI_BASIC_CTL_TRAIL_FILL		BIT(3)
 #define SUN6I_DSI_BASIC_CTL_HBP_DIS		BIT(2)
 #define SUN6I_DSI_BASIC_CTL_HSA_HSE_DIS		BIT(1)
 #define SUN6I_DSI_BASIC_CTL_VIDEO_BURST		BIT(0)
@@ -152,6 +156,8 @@
 
 #define SUN6I_DSI_CMD_TX_REG(n)		(0x300 + (n) * 0x04)
 
+#define SUN6I_DSI_SYNC_POINT		40
+
 enum sun6i_dsi_start_inst {
 	DSI_START_LPRX,
 	DSI_START_LPTX,
@@ -366,13 +372,70 @@ static u16 sun6i_dsi_get_video_start_delay(struct sun6i_dsi *dsi,
 	return max_t(u16, delay, 1);
 }
 
+static u16 sun6i_dsi_get_line_num(struct sun6i_dsi *dsi,
+				  struct drm_display_mode *mode)
+{
+	struct mipi_dsi_device *device = dsi->device;
+	unsigned Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8;
+
+	return mode->htotal * Bpp / device->lanes;
+}
+
+static u16 sun6i_dsi_get_drq_edge0(struct sun6i_dsi *dsi,
+				   struct drm_display_mode *mode,
+				   u16 line_num, u16 edge1)
+{
+	u16 edge0 = edge1;
+
+	edge0 += (mode->hdisplay + 40) * SUN6I_DSI_TCON_DIV / 8;
+
+	if (edge0 > line_num)
+		return edge0 - line_num;
+
+	return 1;
+}
+
+static u16 sun6i_dsi_get_drq_edge1(struct sun6i_dsi *dsi,
+				   struct drm_display_mode *mode,
+				   u16 line_num)
+{
+	struct mipi_dsi_device *device = dsi->device;
+	unsigned Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8;
+	unsigned hbp = mode->htotal - mode->hsync_end;
+	u16 edge1;
+
+	edge1 = SUN6I_DSI_SYNC_POINT;
+	edge1 += (mode->hdisplay + hbp + 20) * Bpp / device->lanes;
+
+	if (edge1 > line_num)
+		return line_num;
+
+	return edge1;
+}
+
 static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi,
 				  struct drm_display_mode *mode)
 {
 	struct mipi_dsi_device *device = dsi->device;
 	u32 val = 0;
 
-	if ((mode->hsync_start - mode->hdisplay) > 20) {
+	if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
+		u16 line_num = sun6i_dsi_get_line_num(dsi, mode);
+		u16 edge0, edge1;
+
+		edge1 = sun6i_dsi_get_drq_edge1(dsi, mode, line_num);
+		edge0 = sun6i_dsi_get_drq_edge0(dsi, mode, line_num, edge1);
+
+		regmap_write(dsi->regs, SUN6I_DSI_BURST_DRQ_REG,
+			     SUN6I_DSI_BURST_DRQ_EDGE0(edge0) |
+			     SUN6I_DSI_BURST_DRQ_EDGE1(edge1));
+
+		regmap_write(dsi->regs, SUN6I_DSI_BURST_LINE_REG,
+			     SUN6I_DSI_BURST_LINE_NUM(line_num) |
+			     SUN6I_DSI_BURST_LINE_SYNC_POINT(SUN6I_DSI_SYNC_POINT));
+
+		val = SUN6I_DSI_TCON_DRQ_ENABLE_MODE;
+	} else if ((mode->hsync_start - mode->hdisplay) > 20) {
 		/* Maaaaaagic */
 		u16 drq = (mode->hsync_start - mode->hdisplay) - 20;
 
@@ -389,8 +452,19 @@ static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi,
 static void sun6i_dsi_setup_inst_loop(struct sun6i_dsi *dsi,
 				      struct drm_display_mode *mode)
 {
+	struct mipi_dsi_device *device = dsi->device;
 	u16 delay = 50 - 1;
 
+	if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
+		delay = (mode->htotal - mode->hdisplay) * 150;
+		delay /= (mode->clock / 1000) * 8;
+		delay -= 50;
+	}
+
+	regmap_write(dsi->regs, SUN6I_DSI_INST_LOOP_SEL_REG,
+			 2 << (4 * DSI_INST_ID_LP11) |
+			 3 << (4 * DSI_INST_ID_DLY));
+
 	regmap_write(dsi->regs, SUN6I_DSI_INST_LOOP_NUM_REG(0),
 		     SUN6I_DSI_INST_LOOP_NUM_N0(50 - 1) |
 		     SUN6I_DSI_INST_LOOP_NUM_N1(delay));
@@ -457,52 +531,71 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
 	struct mipi_dsi_device *device = dsi->device;
 	unsigned int Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8;
 	u16 hbp, hfp, hsa, hblk, vblk;
+	u32 basic_ctl = 0;
 	size_t bytes;
 	u8 *buffer;
 
 	/* Do all timing calculations up front to allocate buffer space */
 
-	/*
-	 * A sync period is composed of a blanking packet (4 bytes +
-	 * payload + 2 bytes) and a sync event packet (4 bytes). Its
-	 * minimal size is therefore 10 bytes
-	 */
+	if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
+		hsa = 0;
+		hbp = 0;
+		hfp = 0;
+		hblk = mode->hdisplay * Bpp;
+		vblk = 0;
+		basic_ctl = SUN6I_DSI_BASIC_CTL_VIDEO_BURST |
+			    SUN6I_DSI_BASIC_CTL_HSA_HSE_DIS |
+			    SUN6I_DSI_BASIC_CTL_HBP_DIS;
+
+		if (device->lanes == 4)
+			basic_ctl |= SUN6I_DSI_BASIC_CTL_TRAIL_FILL |
+				     SUN6I_DSI_BASIC_CTL_TRAIL_INV(0xc);
+	} else {
+		/*
+		 * A sync period is composed of a blanking packet (4
+		 * bytes + payload + 2 bytes) and a sync event packet
+		 * (4 bytes). Its minimal size is therefore 10 bytes
+		 */
 #define HSA_PACKET_OVERHEAD	10
-	hsa = max((unsigned int)HSA_PACKET_OVERHEAD,
-		  (mode->hsync_end - mode->hsync_start) * Bpp - HSA_PACKET_OVERHEAD);
-
-	/*
-	 * The backporch is set using a blanking packet (4 bytes +
-	 * payload + 2 bytes). Its minimal size is therefore 6 bytes
-	 */
+		hsa = max((unsigned int)HSA_PACKET_OVERHEAD,
+			  (mode->hsync_end - mode->hsync_start) * Bpp - HSA_PACKET_OVERHEAD);
+
+		/*
+		 * The backporch is set using a blanking packet (4
+		 * bytes + payload + 2 bytes). Its minimal size is
+		 * therefore 6 bytes
+		 */
 #define HBP_PACKET_OVERHEAD	6
-	hbp = max((unsigned int)HBP_PACKET_OVERHEAD,
-		  (mode->htotal - mode->hsync_end) * Bpp - HBP_PACKET_OVERHEAD);
-
-	/*
-	 * The frontporch is set using a blanking packet (4 bytes +
-	 * payload + 2 bytes). Its minimal size is therefore 6 bytes
-	 */
+		hbp = max((unsigned int)HBP_PACKET_OVERHEAD,
+			  (mode->htotal - mode->hsync_end) * Bpp - HBP_PACKET_OVERHEAD);
+
+		/*
+		 * The frontporch is set using a blanking packet (4
+		 * bytes + payload + 2 bytes). Its minimal size is
+		 * therefore 6 bytes
+		 */
 #define HFP_PACKET_OVERHEAD	6
-	hfp = max((unsigned int)HFP_PACKET_OVERHEAD,
-		  (mode->hsync_start - mode->hdisplay) * Bpp - HFP_PACKET_OVERHEAD);
-
-	/*
-	 * The blanking is set using a sync event (4 bytes) and a
-	 * blanking packet (4 bytes + payload + 2 bytes). Its minimal
-	 * size is therefore 10 bytes.
-	 */
+		hfp = max((unsigned int)HFP_PACKET_OVERHEAD,
+			  (mode->hsync_start - mode->hdisplay) * Bpp - HFP_PACKET_OVERHEAD);
+
+		/*
+		 * The blanking is set using a sync event (4 bytes)
+		 * and a blanking packet (4 bytes + payload + 2
+		 * bytes). Its minimal size is therefore 10 bytes.
+		 */
 #define HBLK_PACKET_OVERHEAD	10
-	hblk = max((unsigned int)HBLK_PACKET_OVERHEAD,
-		   (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp - HBLK_PACKET_OVERHEAD);
-
-	/*
-	 * And I'm not entirely sure what vblk is about. The driver in
-	 * Allwinner BSP is using a rather convoluted calculation
-	 * there only for 4 lanes. However, using 0 (the !4 lanes
-	 * case) even with a 4 lanes screen seems to work...
-	 */
-	vblk = 0;
+		hblk = max((unsigned int)HBLK_PACKET_OVERHEAD,
+			   (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp -
+			   HBLK_PACKET_OVERHEAD);
+
+		/*
+		 * And I'm not entirely sure what vblk is about. The driver in
+		 * Allwinner BSP is using a rather convoluted calculation
+		 * there only for 4 lanes. However, using 0 (the !4 lanes
+		 * case) even with a 4 lanes screen seems to work...
+		 */
+		vblk = 0;
+	}
 
 	/* How many bytes do we need to send all payloads? */
 	bytes = max_t(size_t, max(max(hfp, hblk), max(hsa, hbp)), vblk);
@@ -510,7 +603,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
 	if (WARN_ON(!buffer))
 		return;
 
-	regmap_write(dsi->regs, SUN6I_DSI_BASIC_CTL_REG, 0);
+	regmap_write(dsi->regs, SUN6I_DSI_BASIC_CTL_REG, basic_ctl);
 
 	regmap_write(dsi->regs, SUN6I_DSI_SYNC_HSS_REG,
 		     sun6i_dsi_build_sync_pkt(MIPI_DSI_H_SYNC_START,
-- 
git-series 0.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-11 14:41 [PATCH v3 0/8] drm/sun4i: dsi: Add burst mode support Maxime Ripard
2019-02-11 14:41 ` [PATCH v3 1/8] drm/sun4i: dsi: Restrict DSI tcon clock divider Maxime Ripard
2019-02-11 14:41 ` [PATCH v3 2/8] drm/sun4i: dsi: Change the start delay calculation Maxime Ripard
2019-02-12 15:28   ` Paul Kocialkowski
2019-02-12 15:45     ` Maxime Ripard
2019-02-11 14:41 ` [PATCH v3 3/8] drm/sun4i: dsi: Enforce boundaries on the start delay Maxime Ripard
2019-02-12 15:30   ` Paul Kocialkowski
2019-02-14  9:21     ` Maxime Ripard
2019-02-11 14:41 ` [PATCH v3 4/8] drm/sun4i: dsi: Fix front vs back porch calculation Maxime Ripard
2019-02-12 15:41   ` Paul Kocialkowski
2019-02-11 14:41 ` [PATCH v3 5/8] drm/sun4i: dsi: Fix DRQ calculation Maxime Ripard
2019-02-13 14:33   ` Paul Kocialkowski
2019-02-14  9:23     ` Maxime Ripard
2019-02-11 14:41 ` [PATCH v3 6/8] drm/sun4i: dsi: Rework a bit the hblk calculation Maxime Ripard
2019-02-13 14:41   ` Paul Kocialkowski
2019-02-11 14:41 ` Maxime Ripard [this message]
2019-02-13 14:36   ` [PATCH v3 7/8] drm/sun4i: dsi: Add burst support Paul Kocialkowski
2019-02-14  9:15     ` Maxime Ripard
2019-02-11 14:41 ` [PATCH v3 8/8] drm/panel: Add Ronbo RB070D30 panel Maxime Ripard
2019-02-11 15:13   ` Sam Ravnborg
2019-02-13 14:26   ` Paul Kocialkowski
2019-02-14 11:07     ` Re[2]: " Konstantin Sudakov
2019-02-12 10:32 ` [PATCH v3 0/8] drm/sun4i: dsi: Add burst mode support Jagan Teki
2019-02-15 14:12 ` Maxime Ripard
     [not found]   ` <CAMty3ZAA90-fHPADJSE3ht9CiYWA3yBoyEy7wVv9=6C5JiaTVw@mail.gmail.com>
2019-02-15 17:07     ` Jagan Teki
2019-02-18  8:26       ` Paul Kocialkowski
2019-02-18 10:31         ` Jagan Teki
2019-02-20 16:35           ` Maxime Ripard
2019-02-26  6:48             ` Jagan Teki

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1dcabf2b38d3f0d3387b1cf02575e3d14e3ecd4e.1549896081.git-series.maxime.ripard@bootlin.com \
    --to=maxime.ripard@bootlin.com \
    --cc=bbrezillon@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jagan@openedev.com \
    --cc=k.sudakov@integrasources.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=paul.kocialkowski@bootlin.com \
    --cc=seanpaul@chromium.org \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox