Re: [PATCH v3 0/8] drm/sun4i: dsi: Add burst mode support

From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
To: Jagan Teki <jagan@openedev.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>
Cc: bbrezillon@kernel.org,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	dri-devel@lists.freedesktop.org, Chen-Yu Tsai <wens@csie.org>,
	Sean Paul <seanpaul@chromium.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 0/8] drm/sun4i: dsi: Add burst mode support
Date: Mon, 18 Feb 2019 09:26:09 +0100	[thread overview]
Message-ID: <8d64d043333e3d43c36d60788d6c5b0997bc4e69.camel@bootlin.com> (raw)
In-Reply-To: <c46cd50a-3695-ebc8-0cd4-4ddc27fc353b@openedev.com>

Hi Jagan,

On Fri, 2019-02-15 at 22:37 +0530, Jagan Teki wrote:
> Hi Maxime,
> 
> On 15/02/19 8:10 PM, Jagan Teki wrote:
> > 
> > On Fri, 15 Feb, 2019, 7:43 PM Maxime Ripard, <maxime.ripard@bootlin.com 
> > <mailto:maxime.ripard@bootlin.com>> wrote:
> > 
> >     On Mon, Feb 11, 2019 at 03:41:21PM +0100, Maxime Ripard wrote:
> >      > Hi,
> >      >
> >      > Here is a series implementing the burst mode support for DSI.
> >      >
> >      > It's been tested on an A33 board with the panel supported on the last
> >      > patch, which should remove all quirks due to a different SoC from the
> >      > equation.
> > 
> >     I should have sent that mail yesterday, but patches 1-4 and 6-7 were
> >     merged. Patch 5 was discarded since it was not consistent with the
> >     rest of the driver, and 8 had some comments.
> > 
> > 
> > Are the applied patches from this series or from my v7 series?
> > 
> >   Would you please point me the branch.
> > 
> 
> Unfortunately my last mail didn't reach arm mailing list.
> 
> Just wanted to know are the applied patches from this series or from my 
> v7 series? Would you please point me the repo, I couldn't find it on
> git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git

This series is the one that was applied upstream. You can find the
commits merged at: https://cgit.freedesktop.org/drm/drm-misc/log/

The sunxi tree is not used for changes taking place in specific
subsystems that have their own maintainer trees. In this case, changes
to the DRM driver are going through the DRM misc tree (of which Maxime
is also a maintainer).

With this basis merged, you should be able to respin your series in a
lighter form. Hopefully, that'll help get your changes in shape faster!

Cheers,

Paul

-- 
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel