Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
	Imre Kaloz <kaloz@openwrt.org>,
	Krzysztof Halasa <khalasa@piap.pl>
Cc: Jason Cooper <jason@lakedaemon.net>,
	Arnd Bergmann <arnd@arndb.de>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Tim Harvey <tharvey@gateworks.com>,
	Olof Johansson <olof@lixom.net>,
	Thomas Gleixner <tglx@linutronix.de>,
	Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH 04/17 v1] irqchip: Add driver for IXP4xx
Date: Sun,  3 Feb 2019 22:41:52 +0100
Message-ID: <20190203214205.13594-5-linus.walleij@linaro.org> (raw)
In-Reply-To: <20190203214205.13594-1-linus.walleij@linaro.org>

The IXP4xx (arch/arm/mach-ixp4xx) is an old Intel XScale
platform that has very wide deployment and use.

As part of modernizing the platform, we need to implement a
proper irqchip in the irqchip subsystem.

The IXP4xx irqchip is tightly jotted together with the GPIO
controller, and wheras in the past we would deal with this
complex logic by adding necessarily different code, we can
nowadays modernize it using a hierarchical irqchip.

The actual IXP4 irqchip is a simple active low level IRQ
controller, whereas the GPIO functionality resides in a
different memory area and adds edge trigger support for
the interrupts.

The interrupts from GPIO lines 0..12 are 1:1 mapped to
a fixed set of hardware IRQs on this IRQchip, so we
expect the child GPIO interrupt controller to go in and
allocate descriptors for these interrupts.

For the other interrupts, as we do not yet have DT
support for this platform, we create a linear irqdomain
and then go in and allocate the IRQs that the legacy
boards use. This code will be removed on the DT probe
path when we add DT support to the platform.

We add some translation code for supporting DT
translations for the fwnodes, but we leave most of that
for later.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
irqchip maintainers: I am requesting an ACK for this once
you're happy with the driver, as I intend to merge all of
this IXP4xx rework through ARM SoC.
---
 MAINTAINERS                        |   2 +
 drivers/irqchip/Kconfig            |   6 +
 drivers/irqchip/Makefile           |   1 +
 drivers/irqchip/irq-ixp4xx.c       | 360 +++++++++++++++++++++++++++++
 include/linux/irqchip/irq-ixp4xx.h |  12 +
 5 files changed, 381 insertions(+)
 create mode 100644 drivers/irqchip/irq-ixp4xx.c
 create mode 100644 include/linux/irqchip/irq-ixp4xx.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 32d444476a90..0d48faa3e635 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1651,6 +1651,8 @@ M:	Krzysztof Halasa <khalasa@piap.pl>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-ixp4xx/
+F:	drivers/irqchip/irq-ixp4xx.c
+F:	include/linux/irqchip/irq-ixp4xx.h
 
 ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT
 M:	Jonathan Cameron <jic23@cam.ac.uk>
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 3d1e60779078..c7e09913826b 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -150,6 +150,12 @@ config IMGPDC_IRQ
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 
+config IXP4XX_IRQ
+	bool
+	select IRQ_DOMAIN
+	select GENERIC_IRQ_MULTI_HANDLER
+	select SPARSE_IRQ
+
 config MADERA_IRQ
 	tristate
 
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index c93713d24b86..06139d612108 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_ATMEL_AIC5_IRQ)	+= irq-atmel-aic-common.o irq-atmel-aic5.o
 obj-$(CONFIG_I8259)			+= irq-i8259.o
 obj-$(CONFIG_IMGPDC_IRQ)		+= irq-imgpdc.o
 obj-$(CONFIG_IRQ_MIPS_CPU)		+= irq-mips-cpu.o
+obj-$(CONFIG_IXP4XX_IRQ)		+= irq-ixp4xx.o
 obj-$(CONFIG_SIRF_IRQ)			+= irq-sirfsoc.o
 obj-$(CONFIG_JCORE_AIC)			+= irq-jcore-aic.o
 obj-$(CONFIG_RDA_INTC)			+= irq-rda-intc.o
diff --git a/drivers/irqchip/irq-ixp4xx.c b/drivers/irqchip/irq-ixp4xx.c
new file mode 100644
index 000000000000..7deaf0f82a53
--- /dev/null
+++ b/drivers/irqchip/irq-ixp4xx.c
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * irqchip for the IXP4xx interrupt controller
+ * Copyright (C) 2019 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Based on arch/arm/mach-ixp4xx/common.c
+ * Copyright 2002 (C) Intel Corporation
+ * Copyright 2003-2004 (C) MontaVista, Software, Inc.
+ * Copyright (C) Deepak Saxena <dsaxena@plexity.net>
+ */
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/irq-ixp4xx.h>
+#include <linux/irqdomain.h>
+#include <linux/platform_device.h>
+#include <linux/cpu.h>
+
+#include <asm/exception.h>
+#include <asm/mach/irq.h>
+
+#define IXP4XX_ICPR	0x00 /* Interrupt Status */
+#define IXP4XX_ICMR	0x04 /* Interrupt Enable */
+#define IXP4XX_ICLR	0x08 /* Interrupt IRQ/FIQ Select */
+#define IXP4XX_ICIP	0x0C /* IRQ Status */
+#define IXP4XX_ICFP	0x10 /* FIQ Status */
+#define IXP4XX_ICHR	0x14 /* Interrupt Priority */
+#define IXP4XX_ICIH	0x18 /* IRQ Highest Pri Int */
+#define IXP4XX_ICFH	0x1C /* FIQ Highest Pri Int */
+
+/* IXP43x and IXP46x-only */
+#define	IXP4XX_ICPR2	0x20 /* Interrupt Status 2 */
+#define	IXP4XX_ICMR2	0x24 /* Interrupt Enable 2 */
+#define	IXP4XX_ICLR2	0x28 /* Interrupt IRQ/FIQ Select 2 */
+#define IXP4XX_ICIP2	0x2C /* IRQ Status */
+#define IXP4XX_ICFP2	0x30 /* FIQ Status */
+#define IXP4XX_ICEEN	0x34 /* Error High Pri Enable */
+
+/**
+ * struct ixp4xx_irq - state container for the Faraday IRQ controller
+ * @irqbase: IRQ controller memory base in virtual memory
+ * @is_356: if this is an IXP43x, IXP45x or IX46x SoC (with 64 IRQs)
+ * @irqchip: irqchip for this instance
+ * @domain: IRQ domain for this instance
+ */
+struct ixp4xx_irq {
+	void __iomem *irqbase;
+	bool is_356;
+	struct irq_chip irqchip;
+	struct irq_domain *domain;
+};
+
+/* Local static state container */
+static struct ixp4xx_irq ixirq;
+
+/* GPIO Clocks */
+#define IXP4XX_GPIO_CLK_0		14
+#define IXP4XX_GPIO_CLK_1		15
+
+static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type)
+{
+	/* All are level active high (asserted) here */
+	return 0;
+}
+
+static void ixp4xx_irq_mask(struct irq_data *d)
+{
+	struct ixp4xx_irq *ixi = irq_data_get_irq_chip_data(d);
+	u32 val;
+
+	if (ixi->is_356 && d->hwirq >= 32) {
+		val = __raw_readl(ixi->irqbase + IXP4XX_ICMR2);
+		val &= ~BIT(d->hwirq - 32);
+		__raw_writel(val, ixi->irqbase + IXP4XX_ICMR2);
+	} else {
+		val = __raw_readl(ixi->irqbase + IXP4XX_ICMR);
+		val &= ~BIT(d->hwirq);
+		__raw_writel(val, ixi->irqbase + IXP4XX_ICMR);
+	}
+}
+
+/*
+ * Level triggered interrupts on GPIO lines can only be cleared when the
+ * interrupt condition disappears.
+ */
+static void ixp4xx_irq_unmask(struct irq_data *d)
+{
+	struct ixp4xx_irq *ixi = irq_data_get_irq_chip_data(d);
+	u32 val;
+
+	if (ixi->is_356 && d->hwirq >= 32) {
+		val = __raw_readl(ixi->irqbase + IXP4XX_ICMR2);
+		val |= BIT(d->hwirq - 32);
+		__raw_writel(val, ixi->irqbase + IXP4XX_ICMR2);
+	} else {
+		val = __raw_readl(ixi->irqbase + IXP4XX_ICMR);
+		val |= BIT(d->hwirq);
+		__raw_writel(val, ixi->irqbase + IXP4XX_ICMR);
+	}
+}
+
+asmlinkage void __exception_irq_entry ixp4xx_handle_irq(struct pt_regs *regs)
+{
+	struct ixp4xx_irq *ixi = &ixirq;
+	unsigned long status;
+	int i;
+
+	status = __raw_readl(ixi->irqbase + IXP4XX_ICIP);
+	for_each_set_bit(i, &status, 32)
+		handle_domain_irq(ixi->domain, i, regs);
+
+	/*
+	 * IXP465/IXP435 has an upper IRQ status register
+	 */
+	if (ixi->is_356) {
+		status = __raw_readl(ixi->irqbase + IXP4XX_ICIP2);
+		for_each_set_bit(i, &status, 32)
+			handle_domain_irq(ixi->domain, i + 32, regs);
+	}
+}
+
+static int ixp4xx_irq_domain_translate(struct irq_domain *domain,
+				       struct irq_fwspec *fwspec,
+				       unsigned long *hwirq,
+				       unsigned int *type)
+{
+	/* We support standard DT translation */
+	if (is_of_node(fwspec->fwnode) && fwspec->param_count == 2) {
+		*hwirq = fwspec->param[0];
+		*type = fwspec->param[1];
+		return 0;
+	}
+
+	if (is_fwnode_irqchip(fwspec->fwnode)) {
+		if (fwspec->param_count != 2)
+			return -EINVAL;
+		*hwirq = fwspec->param[0];
+		*type = fwspec->param[1];
+		WARN_ON(*type == IRQ_TYPE_NONE);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int ixp4xx_irq_domain_alloc(struct irq_domain *d,
+				   unsigned int irq, unsigned int nr_irqs,
+				   void *data)
+{
+	struct ixp4xx_irq *ixi = d->host_data;
+	irq_hw_number_t hwirq;
+	unsigned int type = IRQ_TYPE_NONE;
+	struct irq_fwspec *fwspec = data;
+	int ret;
+	int i;
+
+	ret = ixp4xx_irq_domain_translate(d, fwspec, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nr_irqs; i++) {
+		/*
+		 * TODO: after converting IXP4xx to only device tree, set
+		 * handle_bad_irq as default handler and assume all consumers
+		 * call .set_type() as this is provided in the second cell in
+		 * the device tree phandle.
+		 */
+		irq_domain_set_info(d,
+				    irq + i,
+				    hwirq + i,
+				    &ixi->irqchip,
+				    ixi,
+				    handle_level_irq,
+				    NULL, NULL);
+		irq_set_probe(irq + i);
+	}
+
+	return 0;
+}
+
+/*
+ * This needs to be a hierarchical irqdomain to work well with the
+ * GPIO irqchip (which is lower in the hierarchy)
+ */
+static const struct irq_domain_ops ixp4xx_irqdomain_ops = {
+	.translate = ixp4xx_irq_domain_translate,
+	.alloc = ixp4xx_irq_domain_alloc,
+	.free = irq_domain_free_irqs_common,
+};
+
+/**
+ * ixp4xx_get_irq_domain() - retrieve the ixp4xx irq domain
+ *
+ * This function will go away when we transition to DT probing.
+ */
+struct irq_domain *ixp4xx_get_irq_domain(void)
+{
+	struct ixp4xx_irq *ixi = &ixirq;
+
+	return ixi->domain;
+}
+EXPORT_SYMBOL_GPL(ixp4xx_get_irq_domain);
+
+/*
+ * This is the Linux IRQ to hwirq mapping table. This goes away when
+ * we have DT support as all IRQ resources are defined in the device
+ * tree. It will register all the IRQs that are not used by the hierarchical
+ * GPIO IRQ chip. The "holes" inbetween these IRQs will be requested by
+ * the GPIO driver using . This is a step-gap solution.
+ */
+struct ixp4xx_irq_chunk {
+	int irq;
+	int hwirq;
+	int nr_irqs;
+};
+
+static const struct ixp4xx_irq_chunk ixp4xx_irq_chunks[] = {
+	{
+		.irq = 16,
+		.hwirq = 0,
+		.nr_irqs = 6,
+	},
+	{
+		.irq = 24,
+		.hwirq = 8,
+		.nr_irqs = 11,
+	},
+	{
+		.irq = 46,
+		.hwirq = 30,
+		.nr_irqs = 2,
+	},
+	/* Only on the 436 variants */
+	{
+		.irq = 48,
+		.hwirq = 32,
+		.nr_irqs = 10,
+	},
+};
+
+/**
+ * ixp4x_irq_setup() - Common setup code for the IXP4xx interrupt controller
+ * @ixi: State container
+ * @irqbase: Virtual memory base for the interrupt controller
+ * @fwnode: Corresponding fwnode abstraction for this controller
+ * @is_356: if this is an IXP43x, IXP45x or IXP46x SoC variant
+ */
+static int ixp4xx_irq_setup(struct ixp4xx_irq *ixi,
+			    void __iomem *irqbase,
+			    struct fwnode_handle *fwnode,
+			    bool is_356)
+{
+	int nr_irqs;
+
+	ixi->irqbase = irqbase;
+	ixi->is_356 = is_356;
+
+	/* Route all sources to IRQ instead of FIQ */
+	__raw_writel(0x0, ixi->irqbase + IXP4XX_ICLR);
+
+	/* Disable all interrupts */
+	__raw_writel(0x0, ixi->irqbase + IXP4XX_ICMR);
+
+	if (is_356) {
+		/* Route upper 32 sources to IRQ instead of FIQ */
+		__raw_writel(0x0, ixi->irqbase + IXP4XX_ICLR2);
+
+		/* Disable upper 32 interrupts */
+		__raw_writel(0x0, ixi->irqbase + IXP4XX_ICMR2);
+
+		nr_irqs = 64;
+	} else {
+		nr_irqs = 32;
+	}
+
+	ixi->irqchip.name = "IXP4xx";
+	ixi->irqchip.irq_mask = ixp4xx_irq_mask;
+	ixi->irqchip.irq_unmask	= ixp4xx_irq_unmask;
+	ixi->irqchip.irq_set_type = ixp4xx_set_irq_type;
+
+	ixi->domain = irq_domain_create_linear(fwnode, nr_irqs,
+					       &ixp4xx_irqdomain_ops,
+					       ixi);
+	if (!ixi->domain) {
+		pr_crit("IXP4XX: can not add primary irqdomain\n");
+		return -ENODEV;
+	}
+
+	set_handle_irq(ixp4xx_handle_irq);
+
+	return 0;
+}
+
+/**
+ * ixp4xx_irq_init() - Function to initialize the irqchip from boardfiles
+ * @irqbase: physical base for the irq controller
+ * @is_356: if this is an IXP43x, IXP45x or IXP46x SoC variant
+ */
+void __init ixp4xx_irq_init(resource_size_t irqbase,
+			    bool is_356)
+{
+	struct ixp4xx_irq *ixi = &ixirq;
+	void __iomem *base;
+	struct fwnode_handle *fwnode;
+	struct irq_fwspec fwspec;
+	int nr_chunks;
+	int ret;
+	int i;
+
+	base = ioremap(irqbase, 0x100);
+	if (!base) {
+		pr_crit("IXP4XX: could not ioremap interrupt controller\n");
+		return;
+	}
+	fwnode = irq_domain_alloc_fwnode(base);
+	if (!fwnode) {
+		pr_crit("IXP4XX: no domain handle\n");
+		return;
+	}
+	ret = ixp4xx_irq_setup(ixi, base, fwnode, is_356);
+	if (ret) {
+		pr_crit("IXP4XX: failed to set up irqchip\n");
+		irq_domain_free_fwnode(fwnode);
+	}
+
+	nr_chunks = ARRAY_SIZE(ixp4xx_irq_chunks);
+	if (!is_356)
+		nr_chunks--;
+
+	/*
+	 * After adding OF support, this is no longer needed: irqs
+	 * will be allocated for the respective fwnodes.
+	 */
+	for (i = 0; i < nr_chunks; i++) {
+		const struct ixp4xx_irq_chunk *chunk = &ixp4xx_irq_chunks[i];
+
+		pr_info("Allocate Linux IRQs %d..%d HW IRQs %d..%d\n",
+			chunk->irq, chunk->irq + chunk->nr_irqs - 1,
+			chunk->hwirq, chunk->hwirq + chunk->nr_irqs - 1);
+		fwspec.fwnode = fwnode;
+		fwspec.param[0] = chunk->hwirq;
+		fwspec.param[1] = IRQ_TYPE_LEVEL_HIGH;
+		fwspec.param_count = 2;
+		ret = __irq_domain_alloc_irqs(ixi->domain,
+					      chunk->irq,
+					      chunk->nr_irqs,
+					      NUMA_NO_NODE,
+					      &fwspec,
+					      false,
+					      NULL);
+		if (ret < 0) {
+			pr_crit("IXP4XX: can not allocate irqs in hierarchy %d\n",
+				ret);
+			return;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(ixp4xx_irq_init);
diff --git a/include/linux/irqchip/irq-ixp4xx.h b/include/linux/irqchip/irq-ixp4xx.h
new file mode 100644
index 000000000000..9395917d6936
--- /dev/null
+++ b/include/linux/irqchip/irq-ixp4xx.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __IRQ_IXP4XX_H
+#define __IRQ_IXP4XX_H
+
+#include <linux/ioport.h>
+struct irq_domain;
+
+void ixp4xx_irq_init(resource_size_t irqbase,
+		     bool is_356);
+struct irq_domain *ixp4xx_get_irq_domain(void);
+
+#endif /* __IRQ_IXP4XX_H */
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-03 21:41 [PATCH 00/17 v1] ARM: ixp4xx: Modernize and DT support Linus Walleij
2019-02-03 21:41 ` [PATCH 01/17 v1] ARM: ixp4xx: Convert to MULTI_IRQ_HANDLER Linus Walleij
2019-02-03 21:41 ` [PATCH 02/17 v1] ARM: ixp4xx: Pass IRQ resource to beeper Linus Walleij
2019-02-03 21:41 ` [PATCH 03/17 v1] ARM: ixp4xx: Convert to SPARSE_IRQ Linus Walleij
2019-02-03 21:41 ` Linus Walleij [this message]
2019-02-11 15:30   ` [PATCH 04/17 v1] irqchip: Add driver for IXP4xx Marc Zyngier
2019-02-11 20:58     ` Linus Walleij
2019-02-11 22:11       ` Marc Zyngier
2019-02-18  7:06         ` khalasa
2019-02-18  7:16           ` Linus Walleij
2019-02-18  7:35             ` khalasa
2019-02-18  9:40             ` Arnd Bergmann
2019-02-18 12:03               ` khalasa
2019-02-18 12:44                 ` Arnd Bergmann
2019-02-19  6:51                   ` khalasa
2019-02-19  9:46                     ` Arnd Bergmann
2019-02-20  7:35                       ` khalasa
2019-02-18  9:18         ` Arnd Bergmann
2019-02-03 21:41 ` [PATCH 05/17 v1] gpio: ixp4xx: Add driver for the IXP4xx GPIO Linus Walleij
2019-02-06 16:03   ` Bartosz Golaszewski
2019-02-21  8:50     ` Linus Walleij
2019-02-03 21:41 ` [PATCH 06/17 v1] ARM: ixp4xx: Switch to use new IRQ+GPIO drivers Linus Walleij
2019-02-03 21:41 ` [PATCH 07/17 v1] clocksource/drivers/ixp4xx: Add driver Linus Walleij
2019-02-03 21:41 ` [PATCH 08/17 v1] ARM: ixp4xx: Switch to use new timer driver Linus Walleij
2019-02-03 21:41 ` [PATCH 09/17 v1] irqchip: ixp4xx: Add DT bindings Linus Walleij
2019-02-18 21:25   ` Rob Herring
2019-02-03 21:41 ` [PATCH 10/17 v1] irqchip: ixp4xx: Add OF initialization support Linus Walleij
2019-02-03 21:41 ` [PATCH 11/17 v1] clocksource/drivers/ixp4xx: Add DT bindings Linus Walleij
2019-02-18 21:26   ` Rob Herring
2019-02-18 22:10     ` Daniel Lezcano
2019-02-03 21:42 ` [PATCH 12/17 v1] clocksource/drivers/ixp4xx: Add OF initialization support Linus Walleij
2019-02-11 11:26   ` Daniel Lezcano
2019-02-03 21:42 ` [PATCH 13/17 v1] gpio: ixp4xx: Add DT bindings Linus Walleij
2019-02-06 16:05   ` Bartosz Golaszewski
2019-02-18 21:27   ` Rob Herring
2019-02-03 21:42 ` [PATCH 14/17 v1] gpio: ixp4xx: Add OF probing support Linus Walleij
2019-02-06 16:13   ` Bartosz Golaszewski
2019-02-21  8:55     ` Linus Walleij
2019-02-03 21:42 ` [PATCH 15/17 v1] ARM: ixp4xx: Add DT bindings Linus Walleij
2019-02-04 15:16   ` Rob Herring
2019-02-08 19:37     ` Linus Walleij
2019-02-03 21:42 ` [PATCH 16/17 v1] ARM: ixp4xx: Add device tree boot support Linus Walleij
2019-02-03 21:42 ` [PATCH 17/17 v1] RFC: ARM: dts: Add some initial IXP4xx device trees Linus Walleij

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190203214205.13594-5-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=arnd@arndb.de \
    --cc=jason@lakedaemon.net \
    --cc=kaloz@openwrt.org \
    --cc=khalasa@piap.pl \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    --cc=olof@lixom.net \
    --cc=tglx@linutronix.de \
    --cc=tharvey@gateworks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox