[PATCH V4 1/4] dt-bindings: arm: imx: Add the soc binding for i.MX8MN

[PATCH V4 1/4] dt-bindings: arm: imx: Add the soc binding for i.MX8MN

[Anson.Huang]

From: Anson Huang <Anson.Huang@nxp.com>

This patch adds the soc & board binding for i.MX8MN.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
No change.
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 407138e..b35abb1 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -177,6 +177,12 @@ properties:
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
           - const: fsl,imx8mm
 
+      - description: i.MX8MN based Boards
+        items:
+          - enum:
+              - fsl,imx8mn-ddr4-evk            # i.MX8MN DDR4 EVK Board
+          - const: fsl,imx8mn
+
       - description: i.MX8QXP based Boards
         items:
           - enum:
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V4 2/4] arm64: dts: freescale: Add i.MX8MN dtsi support

[Anson.Huang]

From: Anson Huang <Anson.Huang@nxp.com>

The i.MX8M Nano Media Applications Processor is a new SoC of the i.MX8M
family, it is a 14nm FinFET product of the growing mScale family targeting
the consumer market. It is built in Samsung 14LPP to achieve both high
performance and low power consumption and relies on a powerful fully
coherent core complex based on a quad core ARM Cortex-A53 cluster,
Cortex-M7 low-power coprocessor and graphics accelerator.

This patch adds the basic dtsi support for i.MX8MN.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V3:
	- add "fsl,imx8mm-anatop" as anatop's fallback compatible to support SoC driver.
---
 arch/arm64/boot/dts/freescale/imx8mn.dtsi | 712 ++++++++++++++++++++++++++++++
 1 file changed, 712 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mn.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
new file mode 100644
index 0000000..f5eff35
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -0,0 +1,712 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/clock/imx8mn-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "imx8mn-pinfunc.h"
+
+/ {
+	compatible = "fsl,imx8mn";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency= <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <8000000>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+
+		aips1: bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30000000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_WDOG2_ROOT>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_WDOG3_ROOT>;
+				status = "disabled";
+			};
+
+			sdma3: dma-controller@302b0000 {
+				compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>,
+				 <&clk IMX8MN_CLK_SDMA3_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			sdma2: dma-controller@302c0000 {
+				compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
+				reg = <0x302c0000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>,
+					 <&clk IMX8MN_CLK_SDMA2_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mn-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: iomuxc-gpr@30340000 {
+				compatible = "fsl,imx8mn-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: ocotp-ctrl@30350000 {
+				compatible = "fsl,imx8mn-ocotp", "fsl,imx7d-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>;
+			};
+
+			anatop: anatop@30360000 {
+				compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop",
+					     "syscon", "simple-bus";
+				reg = <0x30360000 0x10000>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mn-ccm";
+				reg = <0x30380000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+					 <&clk_ext3>, <&clk_ext4>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+					      "clk_ext3", "clk_ext4";
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mn-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+		};
+
+		aips2: bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30400000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM1_ROOT>,
+					<&clk IMX8MN_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM2_ROOT>,
+					 <&clk IMX8MN_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM3_ROOT>,
+					 <&clk IMX8MN_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM4_ROOT>,
+					 <&clk IMX8MN_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		aips3: bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30800000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			ecspi1: spi@30820000 {
+				compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30820000 0x10000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>,
+					 <&clk IMX8MN_CLK_ECSPI1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi2: spi@30830000 {
+				compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30830000 0x10000>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>,
+					 <&clk IMX8MN_CLK_ECSPI2_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi3: spi@30840000 {
+				compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30840000 0x10000>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>,
+					 <&clk IMX8MN_CLK_ECSPI3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_UART1_ROOT>,
+					 <&clk IMX8MN_CLK_UART1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_UART3_ROOT>,
+					 <&clk IMX8MN_CLK_UART3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart2: serial@30890000 {
+				compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+				reg = <0x30890000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
+					 <&clk IMX8MN_CLK_UART2_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C1_ROOT>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C2_ROOT>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C3_ROOT>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C4_ROOT>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_UART4_ROOT>,
+					 <&clk IMX8MN_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_DUMMY>,
+					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MN_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX8MN_CLK_USDHC1>;
+				assigned-clock-rates = <400000000>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_DUMMY>,
+					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MN_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@30b60000 {
+				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_DUMMY>,
+					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MN_CLK_USDHC3_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>;
+				assigned-clock-rates = <400000000>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			sdma1: dma-controller@30bd0000 {
+				compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MN_CLK_SDMA1_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx8mn-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_ENET1_ROOT>,
+					 <&clk IMX8MN_CLK_ENET1_ROOT>,
+					 <&clk IMX8MN_CLK_ENET_TIMER>,
+					 <&clk IMX8MN_CLK_ENET_REF>,
+					 <&clk IMX8MN_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>,
+						  <&clk IMX8MN_CLK_ENET_TIMER>,
+						  <&clk IMX8MN_CLK_ENET_REF>,
+						  <&clk IMX8MN_CLK_ENET_TIMER>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
+							 <&clk IMX8MN_SYS_PLL2_100M>,
+							 <&clk IMX8MN_SYS_PLL2_125M>;
+				assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				status = "disabled";
+			};
+
+		};
+
+		aips4: bus@32c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbotg1: usb@32e40000 {
+				compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
+				reg = <0x32e40000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
+				clock-names = "usb1_ctrl_root_clk";
+				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>,
+						  <&clk IMX8MN_CLK_USB_CORE_REF>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>,
+							 <&clk IMX8MN_SYS_PLL1_100M>;
+				fsl,usbphy = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@32e40200 {
+				compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
+				#index-cells = <1>;
+				reg = <0x32e40200 0x200>;
+			};
+
+			usbotg2: usb@32e50000 {
+				compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
+				reg = <0x32e50000 0x200>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
+				clock-names = "usb1_ctrl_root_clk";
+				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>,
+						  <&clk IMX8MN_CLK_USB_CORE_REF>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>,
+							 <&clk IMX8MN_SYS_PLL1_100M>;
+				fsl,usbphy = <&usbphynop2>;
+				fsl,usbmisc = <&usbmisc2 0>;
+				status = "disabled";
+			};
+
+			usbmisc2: usbmisc@32e50200 {
+				compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
+				#index-cells = <1>;
+				reg = <0x32e50200 0x200>;
+			};
+
+		};
+
+		dma_apbh: dma-controller@33000000 {
+			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x33000000 0x2000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+		};
+
+		gpmi: nand-controller@33002000 {
+			compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clk IMX8MN_CLK_NAND_ROOT>,
+				 <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+			clock-names = "gpmi_io", "gpmi_bch_apb";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>,
+			      <0x38880000 0xc0000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
+		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
+		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
+		clock-names = "main_clk";
+	};
+
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
+		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
+		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
+		clock-names = "main_clk";
+	};
+};
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V4 3/4] arm64: dts: freescale: Add i.MX8MN DDR4 EVK board support

[Anson.Huang]

From: Anson Huang <Anson.Huang@nxp.com>

This patch adds basic i.MM8MN DDR4 EVK board support.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 arch/arm64/boot/dts/freescale/Makefile            |   1 +
 arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | 221 ++++++++++++++++++++++
 2 files changed, 222 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 0bd122f..2c9070f 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
new file mode 100644
index 0000000..9b2c172
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+
+/ {
+	model = "NXP i.MX8MNano DDR4 EVK board";
+	compatible = "fsl,imx8mn-ddr4-evk", "fsl,imx8mn";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
+			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpio {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000190
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000194
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000196
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			at803x,led-act-blind-workaround;
+			at803x,eee-disabled;
+			at803x,vddio-1p8v;
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V4 4/4] dt-bindings: arm: imx: Add the soc binding for i.MX8MQ

[Anson.Huang]

From: Anson Huang <Anson.Huang@nxp.com>

This patch adds the soc & board binding for i.MX8MQ.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
No changes.
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index b35abb1..f944df8 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -183,6 +183,12 @@ properties:
               - fsl,imx8mn-ddr4-evk            # i.MX8MN DDR4 EVK Board
           - const: fsl,imx8mn
 
+      - description: i.MX8MQ based Boards
+        items:
+          - enum:
+              - fsl,imx8mq-evk            # i.MX8MQ EVK Board
+          - const: fsl,imx8mq
+
       - description: i.MX8QXP based Boards
         items:
           - enum:
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH V4 1/4] dt-bindings: arm: imx: Add the soc binding for i.MX8MN

[Anson Huang]

Ping for this patch series...

> From: Anson Huang <Anson.Huang@nxp.com>
> 
> This patch adds the soc & board binding for i.MX8MN.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> No change.
> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml
> b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 407138e..b35abb1 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -177,6 +177,12 @@ properties:
>                - fsl,imx8mm-evk            # i.MX8MM EVK Board
>            - const: fsl,imx8mm
> 
> +      - description: i.MX8MN based Boards
> +        items:
> +          - enum:
> +              - fsl,imx8mn-ddr4-evk            # i.MX8MN DDR4 EVK Board
> +          - const: fsl,imx8mn
> +
>        - description: i.MX8QXP based Boards
>          items:
>            - enum:
> --
> 2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V4 4/4] dt-bindings: arm: imx: Add the soc binding for i.MX8MQ

[Shawn Guo]

On Wed, Jun 19, 2019 at 10:21:45AM +0800, Anson.Huang@nxp.com wrote:
> From: Anson Huang <Anson.Huang@nxp.com>
> 
> This patch adds the soc & board binding for i.MX8MQ.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> No changes.
> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index b35abb1..f944df8 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -183,6 +183,12 @@ properties:
>                - fsl,imx8mn-ddr4-evk            # i.MX8MN DDR4 EVK Board
>            - const: fsl,imx8mn
>  
> +      - description: i.MX8MQ based Boards
> +        items:
> +          - enum:
> +              - fsl,imx8mq-evk            # i.MX8MQ EVK Board
> +          - const: fsl,imx8mq
> +

We already have this with e126417ff1b1 (dt-bindings: arm: fsl: Add the
imx8mq boards).

Shawn

>        - description: i.MX8QXP based Boards
>          items:
>            - enum:
> -- 
> 2.7.4
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V4 1/4] dt-bindings: arm: imx: Add the soc binding for i.MX8MN

[Shawn Guo]

On Wed, Jun 19, 2019 at 10:21:42AM +0800, Anson.Huang@nxp.com wrote:
> From: Anson Huang <Anson.Huang@nxp.com>
> 
> This patch adds the soc & board binding for i.MX8MN.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

Applied 1 ~ 3, thanks.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel