* [PATCH v2] usb: dwc3: enable otg mode for dwc3 usb ip on layerscape
@ 2019-09-24 3:29 Yinbo Zhu
2019-09-24 3:30 ` Yinbo Zhu
2019-10-14 6:52 ` Shawn Guo
0 siblings, 2 replies; 4+ messages in thread
From: Yinbo Zhu @ 2019-09-24 3:29 UTC (permalink / raw)
To: Shawn Guo, Li Yang, Rob Herring, Mark Rutland
Cc: devicetree, xiaobo.xie, linux-kernel, jiafei.pan, Ran Wang,
yinbo.zhu, linux-arm-kernel
layerscape otg function should be supported HNP SRP and ADP protocol
accroing to rm doc, but dwc3 code not realize it and use id pin to
detect who is host or device(0 is host 1 is device) this patch is to
enable OTG mode on ls1028ardb ls1088ardb and ls1046ardb in dts
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 4 ++++
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++++
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 1 +
3 files changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 9fb9113..076cac6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -171,3 +171,7 @@
&sata {
status = "okay";
};
+
+&usb1 {
+ dr_mode = "otg";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 6a6514d..0c742be 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -122,6 +122,10 @@
};
};
+&usb1 {
+ dr_mode = "otg";
+};
+
#include "fsl-ls1046-post.dtsi"
&fman0 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 8e925df..90b1989 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -95,5 +95,6 @@
};
&usb1 {
+ dr_mode = "otg";
status = "okay";
};
--
2.9.5
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread* RE: [PATCH v2] usb: dwc3: enable otg mode for dwc3 usb ip on layerscape
2019-09-24 3:29 [PATCH v2] usb: dwc3: enable otg mode for dwc3 usb ip on layerscape Yinbo Zhu
@ 2019-09-24 3:30 ` Yinbo Zhu
2019-10-14 6:52 ` Shawn Guo
1 sibling, 0 replies; 4+ messages in thread
From: Yinbo Zhu @ 2019-09-24 3:30 UTC (permalink / raw)
To: Yinbo Zhu, Shawn Guo, Leo Li, Rob Herring, Mark Rutland
Cc: devicetree, Xiaobo Xie, linux-kernel, Jiafei Pan, Ran Wang,
linux-arm-kernel
Hi,
Change in v2:
move the otg property from dtsi to dts.
Regards,
Yinbo Zhu.
-----Original Message-----
From: Yinbo Zhu <yinbo.zhu@nxp.com>
Sent: 2019年9月24日 11:29
To: Shawn Guo <shawnguo@kernel.org>; Leo Li <leoyang.li@nxp.com>; Rob Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>
Cc: Yinbo Zhu <yinbo.zhu@nxp.com>; Xiaobo Xie <xiaobo.xie@nxp.com>; Jiafei Pan <jiafei.pan@nxp.com>; Ran Wang <ran.wang_1@nxp.com>; linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org
Subject: [PATCH v2] usb: dwc3: enable otg mode for dwc3 usb ip on layerscape
layerscape otg function should be supported HNP SRP and ADP protocol accroing to rm doc, but dwc3 code not realize it and use id pin to detect who is host or device(0 is host 1 is device) this patch is to enable OTG mode on ls1028ardb ls1088ardb and ls1046ardb in dts
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 4 ++++ arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++++ arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 1 +
3 files changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 9fb9113..076cac6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -171,3 +171,7 @@
&sata {
status = "okay";
};
+
+&usb1 {
+ dr_mode = "otg";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 6a6514d..0c742be 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -122,6 +122,10 @@
};
};
+&usb1 {
+ dr_mode = "otg";
+};
+
#include "fsl-ls1046-post.dtsi"
&fman0 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 8e925df..90b1989 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -95,5 +95,6 @@
};
&usb1 {
+ dr_mode = "otg";
status = "okay";
};
--
2.9.5
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v2] usb: dwc3: enable otg mode for dwc3 usb ip on layerscape
2019-09-24 3:29 [PATCH v2] usb: dwc3: enable otg mode for dwc3 usb ip on layerscape Yinbo Zhu
2019-09-24 3:30 ` Yinbo Zhu
@ 2019-10-14 6:52 ` Shawn Guo
2019-10-14 7:47 ` [EXT] " Yinbo Zhu
1 sibling, 1 reply; 4+ messages in thread
From: Shawn Guo @ 2019-10-14 6:52 UTC (permalink / raw)
To: Yinbo Zhu
Cc: Mark Rutland, devicetree, linux-kernel, xiaobo.xie, Li Yang,
Rob Herring, jiafei.pan, Ran Wang, linux-arm-kernel
On Tue, Sep 24, 2019 at 11:29:03AM +0800, Yinbo Zhu wrote:
> layerscape otg function should be supported HNP SRP and ADP protocol
> accroing to rm doc, but dwc3 code not realize it and use id pin to
> detect who is host or device(0 is host 1 is device) this patch is to
> enable OTG mode on ls1028ardb ls1088ardb and ls1046ardb in dts
>
> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 4 ++++
> arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++++
> arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 1 +
This is an arm64 DTS patch, so the patch prefix should be something
like 'arm64 dts: fsl: ...'
Shawn
> 3 files changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index 9fb9113..076cac6 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -171,3 +171,7 @@
> &sata {
> status = "okay";
> };
> +
> +&usb1 {
> + dr_mode = "otg";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> index 6a6514d..0c742be 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> @@ -122,6 +122,10 @@
> };
> };
>
> +&usb1 {
> + dr_mode = "otg";
> +};
> +
> #include "fsl-ls1046-post.dtsi"
>
> &fman0 {
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> index 8e925df..90b1989 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> @@ -95,5 +95,6 @@
> };
>
> &usb1 {
> + dr_mode = "otg";
> status = "okay";
> };
> --
> 2.9.5
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread* RE: [EXT] Re: [PATCH v2] usb: dwc3: enable otg mode for dwc3 usb ip on layerscape
2019-10-14 6:52 ` Shawn Guo
@ 2019-10-14 7:47 ` Yinbo Zhu
0 siblings, 0 replies; 4+ messages in thread
From: Yinbo Zhu @ 2019-10-14 7:47 UTC (permalink / raw)
To: Shawn Guo
Cc: Mark Rutland, devicetree, linux-kernel, Xiaobo Xie, Leo Li,
Rob Herring, Jiafei Pan, Ran Wang, linux-arm-kernel
-----Original Message-----
From: Shawn Guo <shawnguo@kernel.org>
Sent: 2019年10月14日 14:52
To: Yinbo Zhu <yinbo.zhu@nxp.com>
Cc: Leo Li <leoyang.li@nxp.com>; Rob Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Xiaobo Xie <xiaobo.xie@nxp.com>; Jiafei Pan <jiafei.pan@nxp.com>; Ran Wang <ran.wang_1@nxp.com>; linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org
Subject: [EXT] Re: [PATCH v2] usb: dwc3: enable otg mode for dwc3 usb ip on layerscape
Caution: EXT Email
On Tue, Sep 24, 2019 at 11:29:03AM +0800, Yinbo Zhu wrote:
> layerscape otg function should be supported HNP SRP and ADP protocol
> accroing to rm doc, but dwc3 code not realize it and use id pin to
> detect who is host or device(0 is host 1 is device) this patch is to
> enable OTG mode on ls1028ardb ls1088ardb and ls1046ardb in dts
>
> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 4 ++++
> arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++++
> arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 1 +
> this is an arm64 DTS patch, so the patch prefix should be something like 'arm64 dts: fsl: ...'
> Shawn
Hi Shawn guo,
This patch I had updated to v3, please check that v3 version.
Regards,
Yinbo Zhu.
> 3 files changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index 9fb9113..076cac6 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -171,3 +171,7 @@
> &sata {
> status = "okay";
> };
> +
> +&usb1 {
> + dr_mode = "otg";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> index 6a6514d..0c742be 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> @@ -122,6 +122,10 @@
> };
> };
>
> +&usb1 {
> + dr_mode = "otg";
> +};
> +
> #include "fsl-ls1046-post.dtsi"
>
> &fman0 {
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> index 8e925df..90b1989 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> @@ -95,5 +95,6 @@
> };
>
> &usb1 {
> + dr_mode = "otg";
> status = "okay";
> };
> --
> 2.9.5
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-10-14 7:48 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-24 3:29 [PATCH v2] usb: dwc3: enable otg mode for dwc3 usb ip on layerscape Yinbo Zhu
2019-09-24 3:30 ` Yinbo Zhu
2019-10-14 6:52 ` Shawn Guo
2019-10-14 7:47 ` [EXT] " Yinbo Zhu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).