Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] arm64: dts: imx8mq-librem5-devkit: add accelerometer and gyro sensor
@ 2019-12-03 13:03 Martin Kepplinger
  0 siblings, 0 replies; only message in thread
From: Martin Kepplinger @ 2019-12-03 13:03 UTC (permalink / raw)
  To: robh, mark.rutland
  Cc: devicetree, kernel, Martin Kepplinger, linux-kernel, linux-imx,
	kernel, linux-arm-kernel

Now that there is driver support, describe the accel and gyro sensor parts
of the LSM9DS1 IMU.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 683a11035643..7a92704c53ec 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -415,6 +415,13 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
+	accel_gyro@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		vdd-supply = <&reg_3v3_p>;
+		vddio-supply = <&reg_3v3_p>;
+	};
+
 	magnetometer@1e	{
 		compatible = "st,lsm9ds1-magn";
 		reg = <0x1e>;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-03 13:03 [PATCH] arm64: dts: imx8mq-librem5-devkit: add accelerometer and gyro sensor Martin Kepplinger

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git