linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Nishanth Menon <nm@ti.com>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Lokesh Vutla <lokeshvutla@ti.com>
Subject: Re: [PATCH 1/4] arm64: dts: ti: k3-j721e-main: Fix external refclk input to SERDES
Date: Thu, 20 May 2021 08:41:40 -0500	[thread overview]
Message-ID: <20210520134140.qzjl7td7ojoqudok@snippet> (raw)
In-Reply-To: <3529e35f-0bef-fd8c-515a-6d4552f2467d@ti.com>

On 18:48-20210520, Kishon Vijay Abraham I wrote:
> Hi Nishanth,
> 
> On 17/05/21 7:35 pm, Nishanth Menon wrote:
> > On 14:00-20210517, Kishon Vijay Abraham I wrote:
> >> Hi Nishanth,
> >>
> >> On 13/05/21 7:31 pm, Nishanth Menon wrote:
> >>> On 17:41-20210513, Kishon Vijay Abraham I wrote:
> >>>> Hi Nishanth,
> >>>>
> >>>> On 13/05/21 12:21 am, Nishanth Menon wrote:
> >>>>> On 20:42-20210512, Kishon Vijay Abraham I wrote:
> >>>>>> Rename the external refclk inputs to the SERDES from
> >>>>>> dummy_cmn_refclk/dummy_cmn_refclk1 to cmn_refclk/cmn_refclk1
> >>>>>> respectively. Also move the external refclk DT nodes outside the
> >>>>>> cbass_main DT node. Since in j721e common processor board, only the
> >>>>>> cmn_refclk1 is connected to 100MHz clock, fix the clock frequency.
> >>>>>>
> >>>>>> Fixes: afd094ebe69f ("arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes")
> >>>>>
> >>>>> Assume we want this part of 5.13 fixes?
> >>>>
> >>>> This doesn't fix any functionality. Okay for me to go in 5.14 along with
> >>>> the rest of the series.
> >>>
> >>>
> >>>>>
> >>>>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> >>>>>> ---
> >>>>>>  .../dts/ti/k3-j721e-common-proc-board.dts     |  4 ++
> >>>>>>  arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 58 ++++++++++---------
> >>>>>>  2 files changed, 34 insertions(+), 28 deletions(-)
> >>>>>>
> >>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> >>>>>> index 60764366e22b..86f7ab511ee8 100644
> >>>>>> --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> >>>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> >>>>>> @@ -635,6 +635,10 @@
> >>>>>>  	status = "disabled";
> >>>>>>  };
> >>>>>>  
> >>>>>> +&cmn_refclk1 {
> >>>>>> +	clock-frequency = <100000000>;
> >>>>>> +};
> >>>>>> +
> >>>>>>  &serdes0 {
> >>>>>>  	serdes0_pcie_link: link@0 {
> >>>>>>  		reg = <0>;
> >>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> >>>>>> index c2aa45a3ac79..002a0c1520ee 100644
> >>>>>> --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> >>>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> >>>>>> @@ -8,6 +8,20 @@
> >>>>>>  #include <dt-bindings/mux/mux.h>
> >>>>>>  #include <dt-bindings/mux/ti-serdes.h>
> >>>>>>  
> >>>>>> +/ {
> >>>>>> +	cmn_refclk: cmn-refclk {
> >>>>>> +		#clock-cells = <0>;
> >>>>>> +		compatible = "fixed-clock";
> >>>>>> +		clock-frequency = <0>;
> >>>>>> +	};
> >>>>>> +
> >>>>>> +	cmn_refclk1: cmn-refclk1 {
> >>>>>
> >>>>> Just curious: why cant we use the standard nodenames with clock?
> >>>>
> >>>> We can use standard names here. Is there any defined nodename for
> >>>> clocks? clk or clock? Don't see $nodename defined for clocks in
> >>>> dt-schema repository.
> >>>
> >>> Looking at the fixed-clock example, lets go with clock
> >>
> >> Since I have two clocks here adding clock@0 and clock@1 introduces the
> >> following error.
> >> /home/a0393678/repos/linux-wip/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dt.yaml:
> >> /: clock@0: 'anyOf' conditional failed, one must be fixed:
> >>         'reg' is a required property
> >>         'ranges' is a required property
> >>
> >> The current "fixed-clock" binding doesn't allow adding "reg" property.
> >> We'll stick to non standard names? or do you think the binding has to be
> >> fixed?
> > 
> > Look at other fixed-clock examples in other arm64 examples
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/freescale/imx8mm.dtsi#n147
> > is a good one.. Binding is fine, IMHO.
> 
> Ah Thanks. It only has to be prefixed with clock-.


Yep - also, though I think it is self evident, I will explicitly state
as well: since dts should represent hardware, using names like "dummy"
does'nt belong to dts - it would indicate something of a software
construct. Knowing what you are trying to describe, I do understand it
is not a "software construct", but please avoid using similar naming
which may create misunderstanding.

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-05-20 13:43 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-12 15:12 [PATCH 0/4] J721E: Use external clock in EVM for SERDES Kishon Vijay Abraham I
2021-05-12 15:12 ` [PATCH 1/4] arm64: dts: ti: k3-j721e-main: Fix external refclk input to SERDES Kishon Vijay Abraham I
2021-05-12 18:51   ` Nishanth Menon
2021-05-13 12:11     ` Kishon Vijay Abraham I
2021-05-13 14:01       ` Nishanth Menon
2021-05-17  8:30         ` Kishon Vijay Abraham I
2021-05-17 14:05           ` Nishanth Menon
2021-05-20 13:18             ` Kishon Vijay Abraham I
2021-05-20 13:41               ` Nishanth Menon [this message]
2021-05-12 15:12 ` [PATCH 2/4] arm64: dts: ti: k3-j721e-main: Add #clock-cells property to serdes DT node Kishon Vijay Abraham I
2021-05-12 15:12 ` [PATCH 3/4] arm64: dts: ti: k3-j721e-common-proc-board: Use external clock for SERDES Kishon Vijay Abraham I
2021-05-12 15:12 ` [PATCH 4/4] arm64: dts: ti: k3-j721e-common-proc-board: Re-name "link" name as "phy" Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210520134140.qzjl7td7ojoqudok@snippet \
    --to=nm@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=kristo@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).