From: Dong Aisheng <aisheng.dong@nxp.com>
To: linux-arm-kernel@lists.infradead.org
Cc: dongas86@gmail.com, linux-imx@nxp.com, shawnguo@kernel.org,
kernel@pengutronix.de, festevam@gmail.com,
devicetree@vger.kernel.org, Dong Aisheng <aisheng.dong@nxp.com>,
Abel Vesa <abel.vesa@nxp.com>, Stephen Boyd <sboyd@kernel.org>
Subject: [PATCH 2/2] arm64: dts: imx8: conn: fix enet clock setting
Date: Fri, 21 May 2021 11:12:48 +0800 [thread overview]
Message-ID: <20210521031248.2763667-3-aisheng.dong@nxp.com> (raw)
In-Reply-To: <20210521031248.2763667-1-aisheng.dong@nxp.com>
enet_clk_ref actually is sourced from internal gpr clocks
which needs a default rate. Also update enet lpcg clock
output names to be more straightforward.
Cc: Abel Vesa <abel.vesa@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
.../boot/dts/freescale/imx8-ss-conn.dtsi | 50 ++++++++++++-------
1 file changed, 32 insertions(+), 18 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index e1e81ca0ca69..a79f42a9618e 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -77,9 +77,12 @@ fec1: ethernet@5b040000 {
<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&enet0_lpcg IMX_LPCG_CLK_4>,
<&enet0_lpcg IMX_LPCG_CLK_2>,
- <&enet0_lpcg IMX_LPCG_CLK_1>,
+ <&enet0_lpcg IMX_LPCG_CLK_3>,
<&enet0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+ assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
+ <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
+ assigned-clock-rates = <250000000>, <125000000>;
fsl,num-tx-queues=<3>;
fsl,num-rx-queues=<3>;
power-domains = <&pd IMX_SC_R_ENET_0>;
@@ -94,9 +97,12 @@ fec2: ethernet@5b050000 {
<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&enet1_lpcg IMX_LPCG_CLK_4>,
<&enet1_lpcg IMX_LPCG_CLK_2>,
- <&enet1_lpcg IMX_LPCG_CLK_1>,
+ <&enet1_lpcg IMX_LPCG_CLK_3>,
<&enet1_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+ assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+ <&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>;
+ assigned-clock-rates = <250000000>, <125000000>;
fsl,num-tx-queues=<3>;
fsl,num-rx-queues=<3>;
power-domains = <&pd IMX_SC_R_ENET_1>;
@@ -152,15 +158,19 @@ enet0_lpcg: clock-controller@5b230000 {
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
<&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
- <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>;
+ <&conn_axi_clk>,
+ <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
+ <&conn_ipg_clk>,
+ <&conn_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
- <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>,
- <IMX_LPCG_CLK_5>;
- clock-output-names = "enet0_ipg_root_clk",
- "enet0_tx_clk",
- "enet0_ahb_clk",
- "enet0_ipg_clk",
- "enet0_ipg_s_clk";
+ <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+ clock-output-names = "enet0_lpcg_timer_clk",
+ "enet0_lpcg_txc_sampling_clk",
+ "enet0_lpcg_ahb_clk",
+ "enet0_lpcg_rgmii_txc_clk",
+ "enet0_lpcg_ipg_clk",
+ "enet0_lpcg_ipg_s_clk";
power-domains = <&pd IMX_SC_R_ENET_0>;
};
@@ -170,15 +180,19 @@ enet1_lpcg: clock-controller@5b240000 {
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
<&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
- <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>;
+ <&conn_axi_clk>,
+ <&clk IMX_SC_R_ENET_1 IMX_SC_C_TXCLK>,
+ <&conn_ipg_clk>,
+ <&conn_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
- <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>,
- <IMX_LPCG_CLK_5>;
- clock-output-names = "enet1_ipg_root_clk",
- "enet1_tx_clk",
- "enet1_ahb_clk",
- "enet1_ipg_clk",
- "enet1_ipg_s_clk";
+ <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+ clock-output-names = "enet1_lpcg_timer_clk",
+ "enet1_lpcg_txc_sampling_clk",
+ "enet1_lpcg_ahb_clk",
+ "enet1_lpcg_rgmii_txc_clk",
+ "enet1_lpcg_ipg_clk",
+ "enet1_lpcg_ipg_s_clk";
power-domains = <&pd IMX_SC_R_ENET_1>;
};
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-05-21 3:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-21 3:12 [PATCH 0/2] arm64: imx8: fix booting with lastest nxp flash.bin Dong Aisheng
2021-05-21 3:12 ` [PATCH 1/2] clk: imx: scu: add enet rgmii gpr clocks Dong Aisheng
2021-05-26 10:34 ` Abel Vesa
2021-05-26 10:46 ` Abel Vesa
2021-05-21 3:12 ` Dong Aisheng [this message]
2021-05-23 5:34 ` [PATCH 2/2] arm64: dts: imx8: conn: fix enet clock setting Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210521031248.2763667-3-aisheng.dong@nxp.com \
--to=aisheng.dong@nxp.com \
--cc=abel.vesa@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=dongas86@gmail.com \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).