linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Javier Martinez Canillas <javierm@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Javier Martinez Canillas <javierm@redhat.com>,
	Peter Robinson <pbrobinson@gmail.com>,
	Shawn Lin <shawn.lin@rock-chips.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Heiko Stuebner <heiko@sntech.de>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Rob Herring <robh@kernel.org>,
	linux-arm-kernel@lists.infradead.org, linux-pci@vger.kernel.org,
	linux-rockchip@lists.infradead.org
Subject: [PATCH v2] PCI: rockchip: Avoid accessing PCIe registers with clocks gated
Date: Tue,  8 Jun 2021 10:04:09 +0200	[thread overview]
Message-ID: <20210608080409.1729276-1-javierm@redhat.com> (raw)

IRQ handlers that are registered for shared interrupts can be called at
any time after have been registered using the request_irq() function.

It's up to drivers to ensure that's always safe for these to be called.

Both the "pcie-sys" and "pcie-client" interrupts are shared, but since
their handlers are registered very early in the probe function, an error
later can lead to these handlers being executed before all the required
resources have been properly setup.

For example, the rockchip_pcie_read() function used by these IRQ handlers
expects that some PCIe clocks will already be enabled, otherwise trying
to access the PCIe registers causes the read to hang and never return.

The CONFIG_DEBUG_SHIRQ option tests if drivers are able to cope with their
shared interrupt handlers being called, by generating a spurious interrupt
just before a shared interrupt handler is unregistered.

But this means that if the option is enabled, any error in the probe path
of this driver could lead to one of the IRQ handlers to be executed.

In a rockpro64 board, the following sequence of events happens:

  1) "pcie-sys" IRQ is requested and its handler registered.
  2) "pcie-client" IRQ is requested and its handler registered.
  3) probe later fails due readl_poll_timeout() returning a timeout.
  4) the "pcie-sys" IRQ is unregistered.
  5) CONFIG_DEBUG_SHIRQ triggers a spurious interrupt.
  6) "pcie-client" IRQ handler is called for this spurious interrupt.
  7) IRQ handler tries to read PCIE_CLIENT_INT_STATUS with clocks gated.
  8) the machine hangs because rockchip_pcie_read() call never returns.

To avoid cases like this, the handlers don't have to be registered until
very late in the probe function, once all the resources have been setup.

So let's just move all the IRQ init before the pci_host_probe() call, that
will prevent issues like this and seems to be the correct thing to do too.

Reported-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
---

Changes in v2:
- Add missing word in the commit message.
- Include Shawn Lin's Acked-by tag.

 drivers/pci/controller/pcie-rockchip-host.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/pcie-rockchip-host.c b/drivers/pci/controller/pcie-rockchip-host.c
index f1d08a1b159..78d04ac29cd 100644
--- a/drivers/pci/controller/pcie-rockchip-host.c
+++ b/drivers/pci/controller/pcie-rockchip-host.c
@@ -592,10 +592,6 @@ static int rockchip_pcie_parse_host_dt(struct rockchip_pcie *rockchip)
 	if (err)
 		return err;
 
-	err = rockchip_pcie_setup_irq(rockchip);
-	if (err)
-		return err;
-
 	rockchip->vpcie12v = devm_regulator_get_optional(dev, "vpcie12v");
 	if (IS_ERR(rockchip->vpcie12v)) {
 		if (PTR_ERR(rockchip->vpcie12v) != -ENODEV)
@@ -973,8 +969,6 @@ static int rockchip_pcie_probe(struct platform_device *pdev)
 	if (err)
 		goto err_vpcie;
 
-	rockchip_pcie_enable_interrupts(rockchip);
-
 	err = rockchip_pcie_init_irq_domain(rockchip);
 	if (err < 0)
 		goto err_deinit_port;
@@ -992,6 +986,12 @@ static int rockchip_pcie_probe(struct platform_device *pdev)
 	bridge->sysdata = rockchip;
 	bridge->ops = &rockchip_pcie_ops;
 
+	err = rockchip_pcie_setup_irq(rockchip);
+	if (err)
+		goto err_remove_irq_domain;
+
+	rockchip_pcie_enable_interrupts(rockchip);
+
 	err = pci_host_probe(bridge);
 	if (err < 0)
 		goto err_remove_irq_domain;
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-06-08  8:05 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-08  8:04 Javier Martinez Canillas [this message]
2021-06-12 22:02 ` [PATCH v2] PCI: rockchip: Avoid accessing PCIe registers with clocks gated Peter Robinson
2021-06-22 10:31 ` Lorenzo Pieralisi
2021-06-24 21:57 ` Bjorn Helgaas
2021-06-24 23:18   ` Robin Murphy
2021-06-24 23:28     ` Bjorn Helgaas
2021-06-24 23:51       ` Robin Murphy
2021-06-24 22:40 ` Bjorn Helgaas
2021-06-25  7:09   ` Javier Martinez Canillas
2021-06-25 14:32     ` Bjorn Helgaas
2021-06-25 18:34       ` Javier Martinez Canillas
2021-06-29  0:38   ` Bjorn Helgaas
2021-06-29  6:17     ` Javier Martinez Canillas
2021-06-29 10:52       ` Robin Murphy
2021-06-29 23:14         ` Bjorn Helgaas
2021-06-30  9:44           ` Robin Murphy
2021-06-30 18:49         ` Bjorn Helgaas
2021-06-30 18:59 ` Bjorn Helgaas
2021-06-30 19:59   ` Javier Martinez Canillas
2021-06-30 20:30     ` Bjorn Helgaas
2021-06-30 20:46       ` Peter Robinson
2021-06-30 22:09       ` Javier Martinez Canillas
2021-07-01 13:59         ` Bjorn Helgaas
2021-07-01 14:59           ` Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210608080409.1729276-1-javierm@redhat.com \
    --to=javierm@redhat.com \
    --cc=bhelgaas@google.com \
    --cc=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=pbrobinson@gmail.com \
    --cc=robh@kernel.org \
    --cc=shawn.lin@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).