linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Ard Biesheuvel <ardb@kernel.org>
To: linux-arm-kernel@lists.infradead.org
Cc: will@kernel.org, catalin.marinas@arm.com, mark.rutland@arm.com,
	maz@kernel.org, anshuman.khandual@arm.com, steve.capper@arm.com,
	Ard Biesheuvel <ardb@kernel.org>
Subject: [RFC PATCH] arm64: mm: limit linear region to 51 bits for KVM in nVHE mode
Date: Tue, 10 Aug 2021 18:12:44 +0200	[thread overview]
Message-ID: <20210810161244.84231-1-ardb@kernel.org> (raw)

KVM in nVHE mode divides up its VA space into two equal halves, and
picks the half that does not conflict with the HYP ID map to map its
linear region. This worked fine when the kernel's linear map itself was
guaranteed to cover precisely as many bits of VA space, but this was
changed by commit f4693c2716b35d08 ("arm64: mm: extend linear region for
52-bit VA configurations").

The result is that, depending on the placement of the ID map, kernel-VA
to hyp-VA translations may produce addresses that either conflict with
other HYP mappings (including the ID map itself) or generate addresses
outside of the 52-bit addressable range, neither of which is likely to
lead to anything useful.

Given that 52-bit capable cores are guaranteed to implement VHE, this
only affects configurations such as pKVM where we opt into non-VHE mode
even if the hardware is VHE capable. So just for these configurations,
let's limit the kernel linear map to 51 bits and work around the
problem.

Fixes:f4693c2716b35d08 ("arm64: mm: extend linear region for 52-bit VA configurations")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
NOTE: build tested only

 arch/arm64/mm/init.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 8490ed2917ff..542dad13e2fc 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -282,7 +282,21 @@ static void __init fdt_enforce_memory_region(void)
 
 void __init arm64_memblock_init(void)
 {
-	const s64 linear_region_size = PAGE_END - _PAGE_OFFSET(vabits_actual);
+	s64 linear_region_size = PAGE_END - _PAGE_OFFSET(vabits_actual);
+
+	/*
+	 * Corner case: 52-bit VA capable systems running KVM in nVHE mode may
+	 * be limited in their ability to support a linear map that exceeds 51
+	 * bits of VA space, depending on the placement of the ID map. Given
+	 * that the placement of the ID map may be randomized, let's simply
+	 * limit the kernel's linear map to 51 bits as well if we detect this
+	 * configuration.
+	 */
+	if (IS_ENABLED(CONFIG_KVM) && vabits_actual == 52 &&
+	    !is_kernel_in_hyp_mode()) {
+		pr_info("Capping linear region to 51 bits for KVM in nVHE mode on LVA capable hardware.\n");
+		linear_region_size = BIT(51);
+	}
 
 	/* Handle linux,usable-memory-range property */
 	fdt_enforce_memory_region();
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-08-10 16:15 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-10 16:12 Ard Biesheuvel [this message]
2021-08-24 10:59 ` [RFC PATCH] arm64: mm: limit linear region to 51 bits for KVM in nVHE mode Will Deacon
2021-08-24 12:56   ` Ard Biesheuvel
2021-08-26 12:16     ` Catalin Marinas
2021-08-26 12:23       ` Ard Biesheuvel
2021-08-26 13:31   ` Catalin Marinas
2021-08-26 16:34     ` Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210810161244.84231-1-ardb@kernel.org \
    --to=ardb@kernel.org \
    --cc=anshuman.khandual@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=steve.capper@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).