linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Will Deacon <will@kernel.org>
To: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, catalin.marinas@arm.com,
	mark.rutland@arm.com, maz@kernel.org, anshuman.khandual@arm.com,
	steve.capper@arm.com
Subject: Re: [RFC PATCH] arm64: mm: limit linear region to 51 bits for KVM in nVHE mode
Date: Tue, 24 Aug 2021 11:59:20 +0100	[thread overview]
Message-ID: <20210824105920.GB22752@willie-the-truck> (raw)
In-Reply-To: <20210810161244.84231-1-ardb@kernel.org>

On Tue, Aug 10, 2021 at 06:12:44PM +0200, Ard Biesheuvel wrote:
> KVM in nVHE mode divides up its VA space into two equal halves, and
> picks the half that does not conflict with the HYP ID map to map its
> linear region. This worked fine when the kernel's linear map itself was
> guaranteed to cover precisely as many bits of VA space, but this was
> changed by commit f4693c2716b35d08 ("arm64: mm: extend linear region for
> 52-bit VA configurations").
> 
> The result is that, depending on the placement of the ID map, kernel-VA
> to hyp-VA translations may produce addresses that either conflict with
> other HYP mappings (including the ID map itself) or generate addresses
> outside of the 52-bit addressable range, neither of which is likely to
> lead to anything useful.
> 
> Given that 52-bit capable cores are guaranteed to implement VHE, this
> only affects configurations such as pKVM where we opt into non-VHE mode
> even if the hardware is VHE capable. So just for these configurations,
> let's limit the kernel linear map to 51 bits and work around the
> problem.
> 
> Fixes:f4693c2716b35d08 ("arm64: mm: extend linear region for 52-bit VA configurations")
> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
> ---
> NOTE: build tested only
> 
>  arch/arm64/mm/init.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
> index 8490ed2917ff..542dad13e2fc 100644
> --- a/arch/arm64/mm/init.c
> +++ b/arch/arm64/mm/init.c
> @@ -282,7 +282,21 @@ static void __init fdt_enforce_memory_region(void)
>  
>  void __init arm64_memblock_init(void)
>  {
> -	const s64 linear_region_size = PAGE_END - _PAGE_OFFSET(vabits_actual);
> +	s64 linear_region_size = PAGE_END - _PAGE_OFFSET(vabits_actual);
> +
> +	/*
> +	 * Corner case: 52-bit VA capable systems running KVM in nVHE mode may
> +	 * be limited in their ability to support a linear map that exceeds 51
> +	 * bits of VA space, depending on the placement of the ID map. Given
> +	 * that the placement of the ID map may be randomized, let's simply
> +	 * limit the kernel's linear map to 51 bits as well if we detect this
> +	 * configuration.
> +	 */
> +	if (IS_ENABLED(CONFIG_KVM) && vabits_actual == 52 &&
> +	    !is_kernel_in_hyp_mode()) {
> +		pr_info("Capping linear region to 51 bits for KVM in nVHE mode on LVA capable hardware.\n");
> +		linear_region_size = BIT(51);
> +	}

Slight nit, but to avoid having to think about PAGE_END I think this would
be a little clearer as:

	if (IS_ENABLED(CONFIG_KVM) && !is_kernel_in_hyp_mode())
		linear_region_size = min_t(u64, linear_region_size, BIT(51));

Will

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-08-24 11:10 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-10 16:12 [RFC PATCH] arm64: mm: limit linear region to 51 bits for KVM in nVHE mode Ard Biesheuvel
2021-08-24 10:59 ` Will Deacon [this message]
2021-08-24 12:56   ` Ard Biesheuvel
2021-08-26 12:16     ` Catalin Marinas
2021-08-26 12:23       ` Ard Biesheuvel
2021-08-26 13:31   ` Catalin Marinas
2021-08-26 16:34     ` Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210824105920.GB22752@willie-the-truck \
    --to=will@kernel.org \
    --cc=anshuman.khandual@arm.com \
    --cc=ardb@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=steve.capper@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).