* [PATCH v4 01/12] dt-bindings: Add vendor prefix for Airoha
2021-11-25 11:07 [PATCH v4 00/12] Add support for Airoha EN7523 SoC Felix Fietkau
@ 2021-11-25 11:07 ` Felix Fietkau
2021-11-28 23:28 ` Rob Herring
2021-11-25 11:07 ` [PATCH v4 02/12] dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB Felix Fietkau
` (10 subsequent siblings)
11 siblings, 1 reply; 24+ messages in thread
From: Felix Fietkau @ 2021-11-25 11:07 UTC (permalink / raw)
To: linux-arm-kernel, Rob Herring; +Cc: john, Rob Herring, devicetree, linux-kernel
From: John Crispin <john@phrozen.org>
Add vendor prefix "airoha" for Airoha, a subsidiary of MediaTek
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 66d6432fd781..025df36aee5f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -59,6 +59,8 @@ patternProperties:
description: Aeroflex Gaisler AB
"^aesop,.*":
description: AESOP Embedded Forum
+ "^airoha,.*":
+ description: Airoha
"^al,.*":
description: Annapurna Labs
"^alcatel,.*":
--
2.30.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v4 02/12] dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB
2021-11-25 11:07 [PATCH v4 00/12] Add support for Airoha EN7523 SoC Felix Fietkau
2021-11-25 11:07 ` [PATCH v4 01/12] dt-bindings: Add vendor prefix for Airoha Felix Fietkau
@ 2021-11-25 11:07 ` Felix Fietkau
2021-11-28 23:29 ` Rob Herring
2021-11-25 11:07 ` [PATCH v4 03/12] ARM: dts: Add basic support for Airoha EN7523 Felix Fietkau
` (9 subsequent siblings)
11 siblings, 1 reply; 24+ messages in thread
From: Felix Fietkau @ 2021-11-25 11:07 UTC (permalink / raw)
To: linux-arm-kernel, Rob Herring, John Crispin; +Cc: devicetree, linux-kernel
From: John Crispin <john@phrozen.org>
Add devicetree binding for Airoha EN7523 SoC and evaluation board.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
---
.../devicetree/bindings/arm/airoha.yaml | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/airoha.yaml
diff --git a/Documentation/devicetree/bindings/arm/airoha.yaml b/Documentation/devicetree/bindings/arm/airoha.yaml
new file mode 100644
index 000000000000..f2661ba81109
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/airoha.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/airoha.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha SoC based Platforms Device Tree Bindings
+
+maintainers:
+ - Felix Fietkau <nbd@nbd.name>
+ - John Crispin <john@phrozen.org>
+description: |
+ Boards with an Airoha SoC shall have the following properties.
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - airoha,en7523-evb
+ - const: airoha,en7523
+
+additionalProperties: true
+
+...
--
2.30.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread* Re: [PATCH v4 02/12] dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB
2021-11-25 11:07 ` [PATCH v4 02/12] dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB Felix Fietkau
@ 2021-11-28 23:29 ` Rob Herring
0 siblings, 0 replies; 24+ messages in thread
From: Rob Herring @ 2021-11-28 23:29 UTC (permalink / raw)
To: Felix Fietkau; +Cc: linux-arm-kernel, John Crispin, devicetree, linux-kernel
On Thu, Nov 25, 2021 at 12:07:28PM +0100, Felix Fietkau wrote:
> From: John Crispin <john@phrozen.org>
>
> Add devicetree binding for Airoha EN7523 SoC and evaluation board.
>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Bert Vermeulen <bert@biot.com>
> ---
> .../devicetree/bindings/arm/airoha.yaml | 27 +++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/airoha.yaml
>
> diff --git a/Documentation/devicetree/bindings/arm/airoha.yaml b/Documentation/devicetree/bindings/arm/airoha.yaml
> new file mode 100644
> index 000000000000..f2661ba81109
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/airoha.yaml
> @@ -0,0 +1,27 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/airoha.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Airoha SoC based Platforms Device Tree Bindings
> +
> +maintainers:
> + - Felix Fietkau <nbd@nbd.name>
> + - John Crispin <john@phrozen.org>
blank line
> +description: |
Don't need '|' if no formatting to preserve.
> + Boards with an Airoha SoC shall have the following properties.
> +
> +properties:
> + $nodename:
> + const: '/'
> + compatible:
> + oneOf:
> + - items:
> + - enum:
> + - airoha,en7523-evb
> + - const: airoha,en7523
> +
> +additionalProperties: true
> +
> +...
> --
> 2.30.1
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v4 03/12] ARM: dts: Add basic support for Airoha EN7523
2021-11-25 11:07 [PATCH v4 00/12] Add support for Airoha EN7523 SoC Felix Fietkau
2021-11-25 11:07 ` [PATCH v4 01/12] dt-bindings: Add vendor prefix for Airoha Felix Fietkau
2021-11-25 11:07 ` [PATCH v4 02/12] dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB Felix Fietkau
@ 2021-11-25 11:07 ` Felix Fietkau
2021-11-25 11:07 ` [PATCH v4 04/12] ARM: Add basic support for Airoha EN7523 SoC Felix Fietkau
` (8 subsequent siblings)
11 siblings, 0 replies; 24+ messages in thread
From: Felix Fietkau @ 2021-11-25 11:07 UTC (permalink / raw)
To: linux-arm-kernel, Arnd Bergmann, Olof Johansson, soc, Rob Herring
Cc: john, devicetree, linux-kernel
From: John Crispin <john@phrozen.org>
Add basic support for Airoha EN7523, enough for booting to console.
The UART is basically 8250-compatible, except for the clock selection.
A clock-frequency value is synthesized to get this to run at 115200 bps.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/en7523-evb.dts | 27 ++++++++
arch/arm/boot/dts/en7523.dtsi | 114 +++++++++++++++++++++++++++++++
3 files changed, 143 insertions(+)
create mode 100644 arch/arm/boot/dts/en7523-evb.dts
create mode 100644 arch/arm/boot/dts/en7523.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0de64f237cd8..81cb49f8d6fd 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -186,6 +186,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
da850-lego-ev3.dtb
dtb-$(CONFIG_ARCH_DIGICOLOR) += \
cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_AIROHA) += \
+ en7523-evb.dtb
dtb-$(CONFIG_ARCH_EXYNOS3) += \
exynos3250-artik5-eval.dtb \
exynos3250-monk.dtb \
diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
new file mode 100644
index 000000000000..e8e5c034cee7
--- /dev/null
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+ model = "Airoha EN7523 Evaluation Board";
+ compatible = "airoha,en7523-evb", "airoha,en7523";
+
+ aliases {
+ serial0 = &uart1;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ stdout-path = "serial0:115200n8";
+ linux,usable-memory-range = <0x80200000 0x1fe00000>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
new file mode 100644
index 000000000000..de9e5f3ff155
--- /dev/null
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ npu_binary@84000000 {
+ no-map;
+ reg = <0x84000000 0xA00000>;
+ };
+
+ npu_flag@84B0000 {
+ no-map;
+ reg = <0x84B00000 0x100000>;
+ };
+
+ npu_pkt@85000000 {
+ no-map;
+ reg = <0x85000000 0x1A00000>;
+ };
+
+ npu_phyaddr@86B00000 {
+ no-map;
+ reg = <0x86B00000 0x100000>;
+ };
+
+ npu_rxdesc@86D00000 {
+ no-map;
+ reg = <0x86D00000 0x100000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ enable-method = "psci";
+ clock-frequency = <80000000>;
+ next-level-cache = <&L2_0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ enable-method = "psci";
+ clock-frequency = <80000000>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ gic: interrupt-controller@9000000 {
+ compatible = "arm,gic-v3";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x09000000 0x20000>, <0x09080000 0x80000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ clock-frequency = <25000000>;
+ };
+
+ uart1: serial@1fbf0000 {
+ compatible = "ns16550";
+ reg = <0x1fbf0000 0x30>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <1843200>;
+ status = "okay";
+ };
+};
--
2.30.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v4 04/12] ARM: Add basic support for Airoha EN7523 SoC
2021-11-25 11:07 [PATCH v4 00/12] Add support for Airoha EN7523 SoC Felix Fietkau
` (2 preceding siblings ...)
2021-11-25 11:07 ` [PATCH v4 03/12] ARM: dts: Add basic support for Airoha EN7523 Felix Fietkau
@ 2021-11-25 11:07 ` Felix Fietkau
2021-11-25 13:21 ` Robin Murphy
2021-11-25 11:07 ` [PATCH v4 05/12] ARM: multi_v7_defconfig: Add " Felix Fietkau
` (7 subsequent siblings)
11 siblings, 1 reply; 24+ messages in thread
From: Felix Fietkau @ 2021-11-25 11:07 UTC (permalink / raw)
To: linux-arm-kernel, Russell King; +Cc: john, linux-kernel
From: John Crispin <john@phrozen.org>
EN7523 is an armv8 based silicon used inside broadband access type devices
such as xPON and xDSL. It shares various silicon blocks with MediaTek
silicon such as the MT7622.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
---
arch/arm/Kconfig | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f0f9e8bec83a..8468361a8721 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -573,6 +573,20 @@ config ARCH_VIRT
select HAVE_ARM_ARCH_TIMER
select ARCH_SUPPORTS_BIG_ENDIAN
+config ARCH_AIROHA
+ bool "Airoha SoC Support"
+ depends on ARCH_MULTI_V7
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_GIC_V3
+ select ARM_DMA_USE_IOMMU
+ select ARM_PSCI
+ select HAVE_ARM_ARCH_TIMER
+ select IOMMU_DMA
+ select COMMON_CLK
+ help
+ Support for Airoha EN7523 SoCs
+
#
# This is sorted alphabetically by mach-* pathname. However, plat-*
# Kconfigs may be included either alphabetically (according to the
--
2.30.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread* Re: [PATCH v4 04/12] ARM: Add basic support for Airoha EN7523 SoC
2021-11-25 11:07 ` [PATCH v4 04/12] ARM: Add basic support for Airoha EN7523 SoC Felix Fietkau
@ 2021-11-25 13:21 ` Robin Murphy
0 siblings, 0 replies; 24+ messages in thread
From: Robin Murphy @ 2021-11-25 13:21 UTC (permalink / raw)
To: Felix Fietkau, linux-arm-kernel, Russell King; +Cc: john, linux-kernel
On 2021-11-25 11:07, Felix Fietkau wrote:
> From: John Crispin <john@phrozen.org>
>
> EN7523 is an armv8 based silicon used inside broadband access type devices
> such as xPON and xDSL. It shares various silicon blocks with MediaTek
> silicon such as the MT7622.
>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Bert Vermeulen <bert@biot.com>
> ---
> arch/arm/Kconfig | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index f0f9e8bec83a..8468361a8721 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -573,6 +573,20 @@ config ARCH_VIRT
> select HAVE_ARM_ARCH_TIMER
> select ARCH_SUPPORTS_BIG_ENDIAN
>
> +config ARCH_AIROHA
> + bool "Airoha SoC Support"
> + depends on ARCH_MULTI_V7
> + select ARM_AMBA
> + select ARM_GIC
> + select ARM_GIC_V3
> + select ARM_DMA_USE_IOMMU
Is this really needed? TBH I'd be rather surprised to see IOMMUs in a
small-scale embedded router SoC, or are there others in a similar vein
to MT7623N with random multimedia bits thrown in as well?
> + select ARM_PSCI
> + select HAVE_ARM_ARCH_TIMER
> + select IOMMU_DMA
This does nothing (except bloat your image with some dead code which
won't be called).
Robin.
> + select COMMON_CLK
> + help
> + Support for Airoha EN7523 SoCs
> +
> #
> # This is sorted alphabetically by mach-* pathname. However, plat-*
> # Kconfigs may be included either alphabetically (according to the
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v4 05/12] ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
2021-11-25 11:07 [PATCH v4 00/12] Add support for Airoha EN7523 SoC Felix Fietkau
` (3 preceding siblings ...)
2021-11-25 11:07 ` [PATCH v4 04/12] ARM: Add basic support for Airoha EN7523 SoC Felix Fietkau
@ 2021-11-25 11:07 ` Felix Fietkau
2021-11-25 11:07 ` [PATCH v4 06/12] dt-bindings: Add en7523-scu device tree binding documentation Felix Fietkau
` (6 subsequent siblings)
11 siblings, 0 replies; 24+ messages in thread
From: Felix Fietkau @ 2021-11-25 11:07 UTC (permalink / raw)
To: linux-arm-kernel, Russell King; +Cc: john, linux-kernel
From: John Crispin <john@phrozen.org>
This enables basic bootup support for the Airoha EN7523 SoC.
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index c951aeed2138..912b3d60325b 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -32,6 +32,7 @@ CONFIG_MACH_BERLIN_BG2=y
CONFIG_MACH_BERLIN_BG2CD=y
CONFIG_MACH_BERLIN_BG2Q=y
CONFIG_ARCH_DIGICOLOR=y
+CONFIG_ARCH_AIROHA=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_HIGHBANK=y
CONFIG_ARCH_HISI=y
--
2.30.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v4 06/12] dt-bindings: Add en7523-scu device tree binding documentation
2021-11-25 11:07 [PATCH v4 00/12] Add support for Airoha EN7523 SoC Felix Fietkau
` (4 preceding siblings ...)
2021-11-25 11:07 ` [PATCH v4 05/12] ARM: multi_v7_defconfig: Add " Felix Fietkau
@ 2021-11-25 11:07 ` Felix Fietkau
2021-11-28 23:31 ` Rob Herring
2021-11-25 11:07 ` [PATCH v4 07/12] clk: en7523: Add clock driver for Airoha EN7523 SoC Felix Fietkau
` (5 subsequent siblings)
11 siblings, 1 reply; 24+ messages in thread
From: Felix Fietkau @ 2021-11-25 11:07 UTC (permalink / raw)
To: linux-arm-kernel, Michael Turquette, Stephen Boyd, Rob Herring
Cc: john, linux-clk, devicetree, linux-kernel
From: John Crispin <john@phrozen.org>
Adds device tree binding documentation for clocks in the EN7523 SOC.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
---
.../bindings/clock/airoha,en7523-scu.yaml | 58 +++++++++++++++++++
include/dt-bindings/clock/en7523-clk.h | 17 ++++++
2 files changed, 75 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
create mode 100644 include/dt-bindings/clock/en7523-clk.h
diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
new file mode 100644
index 000000000000..79660f8126fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EN7523 Clock Device Tree Bindings
+
+maintainers:
+ - Felix Fietkau <nbd@nbd.name>
+ - John Crispin <nbd@nbd.name>
+
+description: |
+ This node defines the System Control Unit of the EN7523 SoC,
+ a collection of registers configuring many different aspects of the SoC.
+
+ The clock driver uses it to read and configure settings of the
+ PLL controller, which provides clocks for the CPU, the bus and
+ other SoC internal peripherals.
+
+ Each clock is assigned an identifier and client nodes use this identifier
+ to specify which clock they consume.
+
+ All these identifiers can be found in:
+ [1]: <include/dt-bindings/clock/en7523-clk.h>.
+
+ The clocks are provided inside a system controller node.
+
+properties:
+ compatible:
+ items:
+ - const: airoha,en7523-scu
+
+ reg:
+ maxItems: 2
+
+ "#clock-cells":
+ description:
+ The first cell indicates the clock number, see [1] for available
+ clocks.
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/en7523-clk.h>
+ scu: scu@1fa20000 {
+ compatible = "airoha,en7523-scu";
+ reg = <0x1fa20000 0x400>,
+ <0x1fb00000 0x1000>;
+ #clock-cells = <1>;
+ };
diff --git a/include/dt-bindings/clock/en7523-clk.h b/include/dt-bindings/clock/en7523-clk.h
new file mode 100644
index 000000000000..7c8414a7cb66
--- /dev/null
+++ b/include/dt-bindings/clock/en7523-clk.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_
+#define _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_
+
+#define EN7523_CLK_GSW 0
+#define EN7523_CLK_EMI 1
+#define EN7523_CLK_BUS 2
+#define EN7523_CLK_SLIC 3
+#define EN7523_CLK_SPI 4
+#define EN7523_CLK_NPU 5
+#define EN7523_CLK_CRYPTO 6
+#define EN7523_CLK_PCIE 7
+
+#define EN7523_NUM_CLOCKS 8
+
+#endif /* _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_ */
--
2.30.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread* Re: [PATCH v4 06/12] dt-bindings: Add en7523-scu device tree binding documentation
2021-11-25 11:07 ` [PATCH v4 06/12] dt-bindings: Add en7523-scu device tree binding documentation Felix Fietkau
@ 2021-11-28 23:31 ` Rob Herring
0 siblings, 0 replies; 24+ messages in thread
From: Rob Herring @ 2021-11-28 23:31 UTC (permalink / raw)
To: Felix Fietkau
Cc: linux-arm-kernel, Michael Turquette, Stephen Boyd, john,
linux-clk, devicetree, linux-kernel
On Thu, Nov 25, 2021 at 12:07:32PM +0100, Felix Fietkau wrote:
> From: John Crispin <john@phrozen.org>
>
> Adds device tree binding documentation for clocks in the EN7523 SOC.
>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> Signed-off-by: John Crispin <john@phrozen.org>
> ---
> .../bindings/clock/airoha,en7523-scu.yaml | 58 +++++++++++++++++++
> include/dt-bindings/clock/en7523-clk.h | 17 ++++++
> 2 files changed, 75 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
> create mode 100644 include/dt-bindings/clock/en7523-clk.h
>
> diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
> new file mode 100644
> index 000000000000..79660f8126fa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: EN7523 Clock Device Tree Bindings
> +
> +maintainers:
> + - Felix Fietkau <nbd@nbd.name>
> + - John Crispin <nbd@nbd.name>
> +
> +description: |
> + This node defines the System Control Unit of the EN7523 SoC,
> + a collection of registers configuring many different aspects of the SoC.
> +
> + The clock driver uses it to read and configure settings of the
> + PLL controller, which provides clocks for the CPU, the bus and
> + other SoC internal peripherals.
> +
> + Each clock is assigned an identifier and client nodes use this identifier
> + to specify which clock they consume.
> +
> + All these identifiers can be found in:
> + [1]: <include/dt-bindings/clock/en7523-clk.h>.
> +
> + The clocks are provided inside a system controller node.
> +
> +properties:
> + compatible:
> + items:
> + - const: airoha,en7523-scu
> +
> + reg:
> + maxItems: 2
> +
> + "#clock-cells":
> + description:
> + The first cell indicates the clock number, see [1] for available
> + clocks.
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> + - '#clock-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/en7523-clk.h>
> + scu: scu@1fa20000 {
> + compatible = "airoha,en7523-scu";
> + reg = <0x1fa20000 0x400>,
> + <0x1fb00000 0x1000>;
> + #clock-cells = <1>;
> + };
> diff --git a/include/dt-bindings/clock/en7523-clk.h b/include/dt-bindings/clock/en7523-clk.h
> new file mode 100644
> index 000000000000..7c8414a7cb66
> --- /dev/null
> +++ b/include/dt-bindings/clock/en7523-clk.h
> @@ -0,0 +1,17 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
Using DT with non-GPL OS? Dual license header and dts files.
> +
> +#ifndef _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_
> +#define _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_
> +
> +#define EN7523_CLK_GSW 0
> +#define EN7523_CLK_EMI 1
> +#define EN7523_CLK_BUS 2
> +#define EN7523_CLK_SLIC 3
> +#define EN7523_CLK_SPI 4
> +#define EN7523_CLK_NPU 5
> +#define EN7523_CLK_CRYPTO 6
> +#define EN7523_CLK_PCIE 7
> +
> +#define EN7523_NUM_CLOCKS 8
> +
> +#endif /* _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_ */
> --
> 2.30.1
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v4 07/12] clk: en7523: Add clock driver for Airoha EN7523 SoC
2021-11-25 11:07 [PATCH v4 00/12] Add support for Airoha EN7523 SoC Felix Fietkau
` (5 preceding siblings ...)
2021-11-25 11:07 ` [PATCH v4 06/12] dt-bindings: Add en7523-scu device tree binding documentation Felix Fietkau
@ 2021-11-25 11:07 ` Felix Fietkau
2021-11-27 11:23 ` kernel test robot
2021-11-25 11:07 ` [PATCH v4 08/12] dt-bindings: PCI: Add support for Airoha EN7532 Felix Fietkau
` (4 subsequent siblings)
11 siblings, 1 reply; 24+ messages in thread
From: Felix Fietkau @ 2021-11-25 11:07 UTC (permalink / raw)
To: linux-arm-kernel, Rob Herring, Michael Turquette, Stephen Boyd
Cc: john, devicetree, linux-kernel, linux-clk
This driver only registers fixed rate clocks, since the clocks are fully
initialized by the boot loader and should not be changed later, according
to Airoha.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
arch/arm/boot/dts/en7523.dtsi | 8 +
drivers/clk/Kconfig | 9 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-en7523.c | 356 ++++++++++++++++++++++++++++++++++
4 files changed, 374 insertions(+)
create mode 100644 drivers/clk/clk-en7523.c
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
index de9e5f3ff155..eabf3fdb3d52 100644
--- a/arch/arm/boot/dts/en7523.dtsi
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -2,6 +2,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/en7523-clk.h>
/ {
interrupt-parent = <&gic>;
@@ -82,6 +83,13 @@ L2_0: l2-cache0 {
};
};
+ scu: scu@1fa20000 {
+ compatible = "airoha,en7523-scu";
+ reg = <0x1fa20000 0x400>,
+ <0x1fb00000 0x1000>;
+ #clock-cells = <1>;
+ };
+
gic: interrupt-controller@9000000 {
compatible = "arm,gic-v3";
interrupt-controller;
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c5b3dc97396a..b542f58c58d2 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -192,6 +192,15 @@ config COMMON_CLK_CS2000_CP
help
If you say yes here you get support for the CS2000 clock multiplier.
+config COMMON_CLK_EN7523
+ bool "Clock driver for Airoha EN7523 SoC system clocks"
+ depends on OF
+ depends on ARCH_AIROHA || ARM || COMPILE_TEST
+ default ARCH_AIROHA
+ help
+ This driver provides the fixed clocks and gates present on Airoha
+ ARM silicon.
+
config COMMON_CLK_FSL_FLEXSPI
tristate "Clock driver for FlexSPI on Layerscape SoCs"
depends on ARCH_LAYERSCAPE || COMPILE_TEST
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index e42312121e51..be11d88c1603 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o
obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o
obj-$(CONFIG_ARCH_SPARX5) += clk-sparx5.o
+obj-$(CONFIG_COMMON_CLK_EN7523) += clk-en7523.o
obj-$(CONFIG_COMMON_CLK_FIXED_MMIO) += clk-fixed-mmio.o
obj-$(CONFIG_COMMON_CLK_FSL_FLEXSPI) += clk-fsl-flexspi.o
obj-$(CONFIG_COMMON_CLK_FSL_SAI) += clk-fsl-sai.o
diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
new file mode 100644
index 000000000000..f1774a5bf537
--- /dev/null
+++ b/drivers/clk/clk-en7523.c
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/regmap.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/en7523-clk.h>
+#include <linux/clk.h>
+
+#define REG_PCI_CONTROL 0x88
+#define REG_PCI_CONTROL_PERSTOUT BIT(29)
+#define REG_PCI_CONTROL_PERSTOUT1 BIT(26)
+#define REG_PCI_CONTROL_REFCLK_EN1 BIT(22)
+#define REG_GSW_CLK_DIV_SEL 0x1b4
+#define REG_EMI_CLK_DIV_SEL 0x1b8
+#define REG_BUS_CLK_DIV_SEL 0x1bc
+#define REG_SPI_CLK_DIV_SEL 0x1c4
+#define REG_SPI_CLK_FREQ_SEL 0x1c8
+#define REG_NPU_CLK_DIV_SEL 0x1fc
+#define REG_CRYPTO_CLKSRC 0x200
+#define REG_RESET_CONTROL 0x834
+#define REG_RESET_CONTROL_PCIEHB BIT(29)
+#define REG_RESET_CONTROL_PCIE1 BIT(27)
+#define REG_RESET_CONTROL_PCIE2 BIT(26)
+
+struct en_clk_desc {
+ int id;
+ const char *name;
+ u32 base_reg;
+ u32 base_bits;
+ u32 base_shift;
+ union {
+ const u32 *base_values;
+ u32 base_value;
+ };
+ int n_base_values;
+
+ u32 div_reg;
+ u32 div_bits;
+ u32 div_shift;
+ u32 div_val0;
+ u32 div_step;
+};
+
+struct en_clk_gate {
+ void __iomem *base;
+ struct clk_hw hw;
+};
+
+static const u32 gsw_base[] = { 400000000, 500000000 };
+static const u32 emi_base[] = { 333000000, 400000000 };
+static const u32 bus_base[] = { 500000000, 540000000 };
+static const u32 slic_base[] = { 100000000, 3125000 };
+static const u32 npu_base[] = { 333000000, 400000000, 500000000 };
+
+static const struct en_clk_desc en7523_base_clks[] = {
+ {
+ .id = EN7523_CLK_GSW,
+ .name = "gsw",
+
+ .base_reg = REG_GSW_CLK_DIV_SEL,
+ .base_bits = 1,
+ .base_shift = 8,
+ .base_values = gsw_base,
+ .n_base_values = ARRAY_SIZE(gsw_base),
+
+ .div_bits = 3,
+ .div_shift = 0,
+ .div_step = 1,
+ }, {
+ .id = EN7523_CLK_EMI,
+ .name = "emi",
+
+ .base_reg = REG_EMI_CLK_DIV_SEL,
+ .base_bits = 1,
+ .base_shift = 8,
+ .base_values = emi_base,
+ .n_base_values = ARRAY_SIZE(emi_base),
+
+ .div_bits = 3,
+ .div_shift = 0,
+ .div_step = 1,
+ }, {
+ .id = EN7523_CLK_BUS,
+ .name = "bus",
+
+ .base_reg = REG_BUS_CLK_DIV_SEL,
+ .base_bits = 1,
+ .base_shift = 8,
+ .base_values = bus_base,
+ .n_base_values = ARRAY_SIZE(bus_base),
+
+ .div_bits = 3,
+ .div_shift = 0,
+ .div_step = 1,
+ }, {
+ .id = EN7523_CLK_SLIC,
+ .name = "slic",
+
+ .base_reg = REG_SPI_CLK_FREQ_SEL,
+ .base_bits = 1,
+ .base_shift = 0,
+ .base_values = slic_base,
+ .n_base_values = ARRAY_SIZE(slic_base),
+
+ .div_reg = REG_SPI_CLK_DIV_SEL,
+ .div_bits = 5,
+ .div_shift = 24,
+ .div_val0 = 20,
+ .div_step = 2,
+ }, {
+ .id = EN7523_CLK_SPI,
+ .name = "spi",
+
+ .base_reg = REG_SPI_CLK_DIV_SEL,
+
+ .base_value = 400000000,
+
+ .div_bits = 5,
+ .div_shift = 8,
+ .div_val0 = 40,
+ .div_step = 2,
+ }, {
+ .id = EN7523_CLK_NPU,
+ .name = "npu",
+
+ .base_reg = REG_NPU_CLK_DIV_SEL,
+ .base_bits = 2,
+ .base_shift = 8,
+ .base_values = npu_base,
+ .n_base_values = ARRAY_SIZE(npu_base),
+
+ .div_bits = 3,
+ .div_shift = 0,
+ .div_step = 1,
+ }, {
+ .id = EN7523_CLK_CRYPTO,
+ .name = "crypto",
+
+ .base_reg = REG_CRYPTO_CLKSRC,
+ .base_bits = 1,
+ .base_shift = 8,
+ .base_values = emi_base,
+ .n_base_values = ARRAY_SIZE(emi_base),
+ }
+};
+
+static const struct of_device_id of_match_clk_en7523[] = {
+ { .compatible = "airoha,en7523-scu", },
+ { /* sentinel */ }
+};
+
+static u32 en7523_get_base_rate(void __iomem *base, int i)
+{
+ const struct en_clk_desc *desc = &en7523_base_clks[i];
+ u32 val;
+
+ if (!desc->base_bits)
+ return desc->base_value;
+
+ val = readl(base + desc->base_reg);
+ val >>= desc->base_shift;
+ val &= (1 << desc->base_bits) - 1;
+
+ if (val >= desc->n_base_values)
+ return 0;
+
+ return desc->base_values[val];
+}
+
+static u32 en7523_get_div(void __iomem *base, int i)
+{
+ const struct en_clk_desc *desc = &en7523_base_clks[i];
+ u32 reg, val;
+
+ if (!desc->div_bits)
+ return 1;
+
+ reg = desc->div_reg ? desc->div_reg : desc->base_reg;
+ val = readl(base + reg);
+ val >>= desc->div_shift;
+ val &= (1 << desc->div_bits) - 1;
+
+ if (!val && desc->div_val0)
+ return desc->div_val0;
+
+ return (val + 1) * desc->div_step;
+}
+
+static int en7523_pci_is_enabled(struct clk_hw *hw)
+{
+ struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+
+ return !!(readl(cg->base + REG_PCI_CONTROL) & REG_PCI_CONTROL_REFCLK_EN1);
+}
+
+static int en7523_pci_enable(struct clk_hw *hw)
+{
+ struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+ void *np_base = cg->base;
+ u32 val, mask;
+
+ /* Need to pull device low before reset */
+ val = readl(np_base + REG_PCI_CONTROL);
+ val &= ~(REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT);
+ writel(val, np_base + REG_PCI_CONTROL);
+ usleep_range(1000, 2000);
+
+ /* Enable PCIe port 1 */
+ val |= REG_PCI_CONTROL_REFCLK_EN1;
+ writel(val, np_base + REG_PCI_CONTROL);
+ usleep_range(1000, 2000);
+
+ /* Reset to default */
+ val = readl(np_base + REG_RESET_CONTROL);
+ mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2 |
+ REG_RESET_CONTROL_PCIEHB;
+ writel(val & ~mask, np_base + REG_RESET_CONTROL);
+ usleep_range(1000, 2000);
+ writel(val | mask, np_base + REG_RESET_CONTROL);
+ msleep(100);
+ writel(val & ~mask, np_base + REG_RESET_CONTROL);
+ usleep_range(5000, 10000);
+
+ /* Release device */
+ mask = REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT;
+ val = readl(np_base + REG_PCI_CONTROL);
+ writel(val & ~mask, np_base + REG_PCI_CONTROL);
+ usleep_range(1000, 2000);
+ writel(val | mask, np_base + REG_PCI_CONTROL);
+ msleep(250);
+
+ return 0;
+}
+
+static void en7523_pci_disable(struct clk_hw *hw)
+{
+ struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+ void *np_base = cg->base;
+ u32 val;
+
+ val = readl(np_base + REG_PCI_CONTROL);
+ val &= ~REG_PCI_CONTROL_REFCLK_EN1;
+ writel(val, np_base + REG_PCI_CONTROL);
+}
+
+static struct clk *en7523_register_pcie_clk(struct device *dev,
+ void __iomem *np_base)
+{
+ static const struct clk_ops pcie_gate_ops = {
+ .is_enabled = en7523_pci_is_enabled,
+ .enable = en7523_pci_enable,
+ .disable = en7523_pci_disable,
+ };
+ struct clk_init_data init = {
+ .name = "pcie",
+ .ops = &pcie_gate_ops,
+ };
+ struct en_clk_gate *cg;
+ struct clk *clk;
+
+ cg = devm_kzalloc(dev, sizeof(*cg), GFP_KERNEL);
+ if (!cg)
+ return NULL;
+
+ cg->base = np_base;
+ cg->hw.init = &init;
+ en7523_pci_disable(&cg->hw);
+
+ clk = clk_register(NULL, &cg->hw);
+ if (IS_ERR(clk))
+ clk = NULL;
+
+ return clk;
+}
+
+static void en7523_register_clocks(struct device *dev, struct clk_onecell_data *clk_data,
+ void __iomem *base, void __iomem *np_base)
+{
+ struct clk *clk;
+ u32 rate;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(en7523_base_clks); i++) {
+ const struct en_clk_desc *desc = &en7523_base_clks[i];
+
+ rate = en7523_get_base_rate(base, i);
+ rate /= en7523_get_div(base, i);
+
+ clk = clk_register_fixed_rate(NULL, desc->name, NULL, 0, rate);
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ desc->name, PTR_ERR(clk));
+ continue;
+ }
+
+ clk_data->clks[desc->id] = clk;
+ }
+
+ clk = en7523_register_pcie_clk(dev, np_base);
+ clk_data->clks[EN7523_CLK_PCIE] = clk;
+
+ clk_data->clk_num = EN7523_NUM_CLOCKS;
+}
+
+static int en7523_clk_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct clk_onecell_data *clk_data;
+ void __iomem *base, *np_base;
+ int r;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ np_base = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(base))
+ return PTR_ERR(np_base);
+
+ clk_data = devm_kzalloc(&pdev->dev, sizeof(*clk_data), GFP_KERNEL);
+ if (!clk_data)
+ return -ENOMEM;
+
+ clk_data->clks = devm_kcalloc(&pdev->dev, EN7523_NUM_CLOCKS,
+ sizeof(*clk_data->clks), GFP_KERNEL);
+ if (!clk_data->clks)
+ return -ENOMEM;
+
+ en7523_register_clocks(&pdev->dev, clk_data, base, np_base);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+
+ return r;
+}
+
+static struct platform_driver clk_en7523_drv = {
+ .probe = en7523_clk_probe,
+ .driver = {
+ .name = "clk-en7523",
+ .of_match_table = of_match_clk_en7523,
+ },
+};
+
+static int clk_en7523_init(void)
+{
+ return platform_driver_register(&clk_en7523_drv);
+}
+
+arch_initcall(clk_en7523_init);
--
2.30.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread* Re: [PATCH v4 07/12] clk: en7523: Add clock driver for Airoha EN7523 SoC
2021-11-25 11:07 ` [PATCH v4 07/12] clk: en7523: Add clock driver for Airoha EN7523 SoC Felix Fietkau
@ 2021-11-27 11:23 ` kernel test robot
0 siblings, 0 replies; 24+ messages in thread
From: kernel test robot @ 2021-11-27 11:23 UTC (permalink / raw)
To: Felix Fietkau, linux-arm-kernel, Rob Herring, Michael Turquette,
Stephen Boyd
Cc: kbuild-all, john, devicetree, linux-kernel, linux-clk
Hi Felix,
I love your patch! Perhaps something to improve:
[auto build test WARNING on robh/for-next]
[also build test WARNING on clk/clk-next v5.16-rc2 next-20211126]
[cannot apply to linusw-gpio/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Felix-Fietkau/dt-bindings-Add-vendor-prefix-for-Airoha/20211125-200806
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: powerpc64-randconfig-s032-20211126 (https://download.01.org/0day-ci/archive/20211127/202111271912.FCpB3UGa-lkp@intel.com/config)
compiler: powerpc64-linux-gcc (GCC) 11.2.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-dirty
# https://github.com/0day-ci/linux/commit/ff9f74e46043aecee2d7373f978a99ce9a3f1e27
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Felix-Fietkau/dt-bindings-Add-vendor-prefix-for-Airoha/20211125-200806
git checkout ff9f74e46043aecee2d7373f978a99ce9a3f1e27
# save the config file to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=powerpc SHELL=/bin/bash drivers/clk/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
>> drivers/clk/clk-en7523.c:202:27: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected void *np_base @@ got void [noderef] __iomem *base @@
drivers/clk/clk-en7523.c:202:27: sparse: expected void *np_base
drivers/clk/clk-en7523.c:202:27: sparse: got void [noderef] __iomem *base
>> drivers/clk/clk-en7523.c:206:29: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void const volatile [noderef] __iomem *addr @@ got void * @@
drivers/clk/clk-en7523.c:206:29: sparse: expected void const volatile [noderef] __iomem *addr
drivers/clk/clk-en7523.c:206:29: sparse: got void *
>> drivers/clk/clk-en7523.c:208:29: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void volatile [noderef] __iomem *addr @@ got void * @@
drivers/clk/clk-en7523.c:208:29: sparse: expected void volatile [noderef] __iomem *addr
drivers/clk/clk-en7523.c:208:29: sparse: got void *
drivers/clk/clk-en7523.c:213:29: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void volatile [noderef] __iomem *addr @@ got void * @@
drivers/clk/clk-en7523.c:213:29: sparse: expected void volatile [noderef] __iomem *addr
drivers/clk/clk-en7523.c:213:29: sparse: got void *
drivers/clk/clk-en7523.c:217:29: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void const volatile [noderef] __iomem *addr @@ got void * @@
drivers/clk/clk-en7523.c:217:29: sparse: expected void const volatile [noderef] __iomem *addr
drivers/clk/clk-en7523.c:217:29: sparse: got void *
drivers/clk/clk-en7523.c:220:37: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void volatile [noderef] __iomem *addr @@ got void * @@
drivers/clk/clk-en7523.c:220:37: sparse: expected void volatile [noderef] __iomem *addr
drivers/clk/clk-en7523.c:220:37: sparse: got void *
drivers/clk/clk-en7523.c:222:36: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void volatile [noderef] __iomem *addr @@ got void * @@
drivers/clk/clk-en7523.c:222:36: sparse: expected void volatile [noderef] __iomem *addr
drivers/clk/clk-en7523.c:222:36: sparse: got void *
drivers/clk/clk-en7523.c:224:37: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void volatile [noderef] __iomem *addr @@ got void * @@
drivers/clk/clk-en7523.c:224:37: sparse: expected void volatile [noderef] __iomem *addr
drivers/clk/clk-en7523.c:224:37: sparse: got void *
drivers/clk/clk-en7523.c:229:29: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void const volatile [noderef] __iomem *addr @@ got void * @@
drivers/clk/clk-en7523.c:229:29: sparse: expected void const volatile [noderef] __iomem *addr
drivers/clk/clk-en7523.c:229:29: sparse: got void *
drivers/clk/clk-en7523.c:230:37: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void volatile [noderef] __iomem *addr @@ got void * @@
drivers/clk/clk-en7523.c:230:37: sparse: expected void volatile [noderef] __iomem *addr
drivers/clk/clk-en7523.c:230:37: sparse: got void *
drivers/clk/clk-en7523.c:232:36: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void volatile [noderef] __iomem *addr @@ got void * @@
drivers/clk/clk-en7523.c:232:36: sparse: expected void volatile [noderef] __iomem *addr
drivers/clk/clk-en7523.c:232:36: sparse: got void *
drivers/clk/clk-en7523.c:241:27: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected void *np_base @@ got void [noderef] __iomem *base @@
drivers/clk/clk-en7523.c:241:27: sparse: expected void *np_base
drivers/clk/clk-en7523.c:241:27: sparse: got void [noderef] __iomem *base
drivers/clk/clk-en7523.c:244:29: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void const volatile [noderef] __iomem *addr @@ got void * @@
drivers/clk/clk-en7523.c:244:29: sparse: expected void const volatile [noderef] __iomem *addr
drivers/clk/clk-en7523.c:244:29: sparse: got void *
drivers/clk/clk-en7523.c:246:29: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void volatile [noderef] __iomem *addr @@ got void * @@
drivers/clk/clk-en7523.c:246:29: sparse: expected void volatile [noderef] __iomem *addr
drivers/clk/clk-en7523.c:246:29: sparse: got void *
vim +202 drivers/clk/clk-en7523.c
198
199 static int en7523_pci_enable(struct clk_hw *hw)
200 {
201 struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
> 202 void *np_base = cg->base;
203 u32 val, mask;
204
205 /* Need to pull device low before reset */
> 206 val = readl(np_base + REG_PCI_CONTROL);
207 val &= ~(REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT);
> 208 writel(val, np_base + REG_PCI_CONTROL);
209 usleep_range(1000, 2000);
210
211 /* Enable PCIe port 1 */
212 val |= REG_PCI_CONTROL_REFCLK_EN1;
213 writel(val, np_base + REG_PCI_CONTROL);
214 usleep_range(1000, 2000);
215
216 /* Reset to default */
217 val = readl(np_base + REG_RESET_CONTROL);
218 mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2 |
219 REG_RESET_CONTROL_PCIEHB;
220 writel(val & ~mask, np_base + REG_RESET_CONTROL);
221 usleep_range(1000, 2000);
222 writel(val | mask, np_base + REG_RESET_CONTROL);
223 msleep(100);
224 writel(val & ~mask, np_base + REG_RESET_CONTROL);
225 usleep_range(5000, 10000);
226
227 /* Release device */
228 mask = REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT;
229 val = readl(np_base + REG_PCI_CONTROL);
230 writel(val & ~mask, np_base + REG_PCI_CONTROL);
231 usleep_range(1000, 2000);
232 writel(val | mask, np_base + REG_PCI_CONTROL);
233 msleep(250);
234
235 return 0;
236 }
237
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v4 08/12] dt-bindings: PCI: Add support for Airoha EN7532
2021-11-25 11:07 [PATCH v4 00/12] Add support for Airoha EN7523 SoC Felix Fietkau
` (6 preceding siblings ...)
2021-11-25 11:07 ` [PATCH v4 07/12] clk: en7523: Add clock driver for Airoha EN7523 SoC Felix Fietkau
@ 2021-11-25 11:07 ` Felix Fietkau
2021-11-28 23:32 ` Rob Herring
2021-11-25 11:07 ` [PATCH v4 09/12] PCI: mediatek: allow selecting controller driver for airoha arch Felix Fietkau
` (3 subsequent siblings)
11 siblings, 1 reply; 24+ messages in thread
From: Felix Fietkau @ 2021-11-25 11:07 UTC (permalink / raw)
To: linux-arm-kernel, Ryder Lee, Jianjun Wang, Bjorn Helgaas,
Rob Herring, Matthias Brugger
Cc: john, linux-pci, linux-mediatek, devicetree, linux-kernel
From: John Crispin <john@phrozen.org>
EN7532 is an ARM based platform SoC integrating the same PCIe IP as
MT7622, add a binding for it.
Signed-off-by: John Crispin <john@phrozen.org>
---
Documentation/devicetree/bindings/pci/mediatek-pcie.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
index 57ae73462272..684227522267 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -7,6 +7,7 @@ Required properties:
"mediatek,mt7622-pcie"
"mediatek,mt7623-pcie"
"mediatek,mt7629-pcie"
+ "airoha,en7523-pcie"
- device_type: Must be "pci"
- reg: Base addresses and lengths of the root ports.
- reg-names: Names of the above areas to use during resource lookup.
--
2.30.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread* Re: [PATCH v4 08/12] dt-bindings: PCI: Add support for Airoha EN7532
2021-11-25 11:07 ` [PATCH v4 08/12] dt-bindings: PCI: Add support for Airoha EN7532 Felix Fietkau
@ 2021-11-28 23:32 ` Rob Herring
0 siblings, 0 replies; 24+ messages in thread
From: Rob Herring @ 2021-11-28 23:32 UTC (permalink / raw)
To: Felix Fietkau
Cc: linux-mediatek, linux-pci, Matthias Brugger, devicetree,
Bjorn Helgaas, linux-kernel, Jianjun Wang, john, Ryder Lee,
linux-arm-kernel, Rob Herring
On Thu, 25 Nov 2021 12:07:34 +0100, Felix Fietkau wrote:
> From: John Crispin <john@phrozen.org>
>
> EN7532 is an ARM based platform SoC integrating the same PCIe IP as
> MT7622, add a binding for it.
>
> Signed-off-by: John Crispin <john@phrozen.org>
> ---
> Documentation/devicetree/bindings/pci/mediatek-pcie.txt | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v4 09/12] PCI: mediatek: allow selecting controller driver for airoha arch
2021-11-25 11:07 [PATCH v4 00/12] Add support for Airoha EN7523 SoC Felix Fietkau
` (7 preceding siblings ...)
2021-11-25 11:07 ` [PATCH v4 08/12] dt-bindings: PCI: Add support for Airoha EN7532 Felix Fietkau
@ 2021-11-25 11:07 ` Felix Fietkau
2021-11-25 11:07 ` [PATCH v4 10/12] ARM: dts: Add PCIe support for Airoha EN7523 Felix Fietkau
` (2 subsequent siblings)
11 siblings, 0 replies; 24+ messages in thread
From: Felix Fietkau @ 2021-11-25 11:07 UTC (permalink / raw)
To: linux-arm-kernel, Lorenzo Pieralisi, Rob Herring,
Krzysztof Wilczyński, Bjorn Helgaas, Matthias Brugger
Cc: john, linux-pci, linux-kernel, linux-mediatek
The EN7523 SoC uses the same controller as MT7622
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
drivers/pci/controller/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 93b141110537..f1342059c2a3 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -233,7 +233,7 @@ config PCIE_ROCKCHIP_EP
config PCIE_MEDIATEK
tristate "MediaTek PCIe controller"
- depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST
depends on OF
depends on PCI_MSI_IRQ_DOMAIN
help
--
2.30.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread* [PATCH v4 10/12] ARM: dts: Add PCIe support for Airoha EN7523
2021-11-25 11:07 [PATCH v4 00/12] Add support for Airoha EN7523 SoC Felix Fietkau
` (8 preceding siblings ...)
2021-11-25 11:07 ` [PATCH v4 09/12] PCI: mediatek: allow selecting controller driver for airoha arch Felix Fietkau
@ 2021-11-25 11:07 ` Felix Fietkau
2021-11-25 12:15 ` Jianjun Wang
2021-11-25 11:07 ` [PATCH v4 11/12] dt-bindings: arm: airoha: Add binding for Airoha GPIO controller Felix Fietkau
2021-11-25 11:07 ` [PATCH v4 12/12] gpio: Add support for Airoha EN7523 " Felix Fietkau
11 siblings, 1 reply; 24+ messages in thread
From: Felix Fietkau @ 2021-11-25 11:07 UTC (permalink / raw)
To: linux-arm-kernel, Rob Herring, Matthias Brugger
Cc: john, devicetree, linux-kernel, linux-mediatek
This uses the MediaTek MT7622 PCIe driver, since the PCIe IP block is nearly
identical to the one in MT7622
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
arch/arm/boot/dts/en7523-evb.dts | 12 +++++++
arch/arm/boot/dts/en7523.dtsi | 60 ++++++++++++++++++++++++++++++++
2 files changed, 72 insertions(+)
diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
index e8e5c034cee7..af1a8dd40a41 100644
--- a/arch/arm/boot/dts/en7523-evb.dts
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -25,3 +25,15 @@ memory@80000000 {
reg = <0x80000000 0x20000000>;
};
};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
index eabf3fdb3d52..d9bdb51614b5 100644
--- a/arch/arm/boot/dts/en7523.dtsi
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -119,4 +119,64 @@ uart1: serial@1fbf0000 {
clock-frequency = <1843200>;
status = "okay";
};
+
+ pcie: pcie@1a140000 {
+ compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0x1fa91000 0x1000>,
+ <0x1fa92000 0x1000>;
+ reg-names = "port0", "port1";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scu EN7523_CLK_PCIE>,
+ <&scu EN7523_CLK_PCIE>;
+ clock-names = "sys_ck0", "sys_ck1";
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
+ status = "disabled";
+
+ pcie0: pcie@0,0 {
+ device_type = "pci";
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1: pcie@1,0 {
+ device_type = "pci";
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
};
--
2.30.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread* Re: [PATCH v4 10/12] ARM: dts: Add PCIe support for Airoha EN7523
2021-11-25 11:07 ` [PATCH v4 10/12] ARM: dts: Add PCIe support for Airoha EN7523 Felix Fietkau
@ 2021-11-25 12:15 ` Jianjun Wang
0 siblings, 0 replies; 24+ messages in thread
From: Jianjun Wang @ 2021-11-25 12:15 UTC (permalink / raw)
To: Felix Fietkau, linux-arm-kernel, Rob Herring, Matthias Brugger
Cc: john, devicetree, linux-kernel, linux-mediatek
Hi Felix,
On Thu, 2021-11-25 at 12:07 +0100, Felix Fietkau wrote:
> This uses the MediaTek MT7622 PCIe driver, since the PCIe IP block is
> nearly
> identical to the one in MT7622
>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> ---
> arch/arm/boot/dts/en7523-evb.dts | 12 +++++++
> arch/arm/boot/dts/en7523.dtsi | 60
> ++++++++++++++++++++++++++++++++
> 2 files changed, 72 insertions(+)
>
> diff --git a/arch/arm/boot/dts/en7523-evb.dts
> b/arch/arm/boot/dts/en7523-evb.dts
> index e8e5c034cee7..af1a8dd40a41 100644
> --- a/arch/arm/boot/dts/en7523-evb.dts
> +++ b/arch/arm/boot/dts/en7523-evb.dts
> @@ -25,3 +25,15 @@ memory@80000000 {
> reg = <0x80000000 0x20000000>;
> };
> };
> +
> +&pcie {
> + status = "okay";
> +};
> +
> +&pcie0 {
> + status = "okay";
> +};
> +
> +&pcie1 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/en7523.dtsi
> b/arch/arm/boot/dts/en7523.dtsi
> index eabf3fdb3d52..d9bdb51614b5 100644
> --- a/arch/arm/boot/dts/en7523.dtsi
> +++ b/arch/arm/boot/dts/en7523.dtsi
> @@ -119,4 +119,64 @@ uart1: serial@1fbf0000 {
> clock-frequency = <1843200>;
> status = "okay";
> };
> +
> + pcie: pcie@1a140000 {
> + compatible = "airoha,en7523-pcie", "mediatek,mt7622-
> pcie";
> + device_type = "pci";
> + reg = <0x1fa91000 0x1000>,
> + <0x1fa92000 0x1000>;
> + reg-names = "port0", "port1";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scu EN7523_CLK_PCIE>,
> + <&scu EN7523_CLK_PCIE>;
> + clock-names = "sys_ck0", "sys_ck1";
> + bus-range = <0x00 0xff>;
> + ranges = <0x82000000 0 0x20000000 0x20000000 0
> 0x10000000>;
> + status = "disabled";
> +
> + pcie0: pcie@0,0 {
> + device_type = "pci";
> + reg = <0x0000 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges;
> + status = "disabled";
> +
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 1 &pcie_intc0 0>,
> + <0 0 0 2 &pcie_intc0 1>,
> + <0 0 0 3 &pcie_intc0 2>,
> + <0 0 0 4 &pcie_intc0 3>;
> + pcie_intc0: interrupt-controller {
> + interrupt-controller;
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + pcie1: pcie@1,0 {
> + device_type = "pci";
> + reg = <0x0800 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges;
> + status = "disabled";
> +
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 1 &pcie_intc1 0>,
> + <0 0 0 2 &pcie_intc1 1>,
> + <0 0 0 3 &pcie_intc1 2>,
> + <0 0 0 4 &pcie_intc1 3>;
> + pcie_intc1: interrupt-controller {
> + interrupt-controller;
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + };
> + };
> + };
There are some known issues with this device node style, please split
the PCIe node into two independent nodes to comply with the hardware
design.
Here is the fix patch we sent before:
https://lore.kernel.org/linux-pci/20210823032800.1660-6-chuanjia.liu@mediatek.com/
Thanks.
> };
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v4 11/12] dt-bindings: arm: airoha: Add binding for Airoha GPIO controller
2021-11-25 11:07 [PATCH v4 00/12] Add support for Airoha EN7523 SoC Felix Fietkau
` (9 preceding siblings ...)
2021-11-25 11:07 ` [PATCH v4 10/12] ARM: dts: Add PCIe support for Airoha EN7523 Felix Fietkau
@ 2021-11-25 11:07 ` Felix Fietkau
2021-11-26 1:19 ` Linus Walleij
2021-11-25 11:07 ` [PATCH v4 12/12] gpio: Add support for Airoha EN7523 " Felix Fietkau
11 siblings, 1 reply; 24+ messages in thread
From: Felix Fietkau @ 2021-11-25 11:07 UTC (permalink / raw)
To: linux-arm-kernel, Linus Walleij, Bartosz Golaszewski,
Rob Herring, John Crispin
Cc: linux-gpio, devicetree, linux-kernel
From: John Crispin <john@phrozen.org>
Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
GPIOs
Signed-off-by: John Crispin <john@phrozen.org>
---
.../bindings/gpio/airoha,en7523-gpio.yaml | 63 +++++++++++++++++++
1 file changed, 63 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
diff --git a/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
new file mode 100644
index 000000000000..9ab36a7c1a3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/airoha,en7523-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7523 GPIO controller
+
+maintainers:
+ - John Crispin <john@phrozen.org>
+
+description: |
+ Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
+ GPIOs.
+
+properties:
+ $nodename:
+ pattern: "^gpio@[0-9a-f]+$"
+
+ compatible:
+ items:
+ - const: airoha,en7523-gpio
+
+ reg:
+ maxItems: 4
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-controller: true
+
+required:
+ - compatible
+ - reg
+ - "#gpio-cells"
+ - gpio-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio0: gpio@1fbf0200 {
+ compatible = "airoha,en7523-gpio";
+ reg = <0x1fbf0204 0x4>,
+ <0x1fbf0200 0x4>,
+ <0x1fbf0220 0x4>,
+ <0x1fbf0214 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio1: gpio@1fbf0270 {
+ compatible = "airoha,en7523-gpio";
+ reg = <0x1fbf0270 0x4>,
+ <0x1fbf0260 0x4>,
+ <0x1fbf0264 0x4>,
+ <0x1fbf0278 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+
+...
--
2.30.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread* Re: [PATCH v4 11/12] dt-bindings: arm: airoha: Add binding for Airoha GPIO controller
2021-11-25 11:07 ` [PATCH v4 11/12] dt-bindings: arm: airoha: Add binding for Airoha GPIO controller Felix Fietkau
@ 2021-11-26 1:19 ` Linus Walleij
0 siblings, 0 replies; 24+ messages in thread
From: Linus Walleij @ 2021-11-26 1:19 UTC (permalink / raw)
To: Felix Fietkau
Cc: linux-arm-kernel, Bartosz Golaszewski, Rob Herring, John Crispin,
linux-gpio, devicetree, linux-kernel
Hi Felix,
thanks for your patch!
On Thu, Nov 25, 2021 at 12:24 PM Felix Fietkau <nbd@nbd.name> wrote:
> From: John Crispin <john@phrozen.org>
>
> Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
> GPIOs
>
> Signed-off-by: John Crispin <john@phrozen.org>
(...)
> + reg:
> + maxItems: 4
Can we write some short description on what the four different regs
are?
With that fixed:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v4 12/12] gpio: Add support for Airoha EN7523 GPIO controller
2021-11-25 11:07 [PATCH v4 00/12] Add support for Airoha EN7523 SoC Felix Fietkau
` (10 preceding siblings ...)
2021-11-25 11:07 ` [PATCH v4 11/12] dt-bindings: arm: airoha: Add binding for Airoha GPIO controller Felix Fietkau
@ 2021-11-25 11:07 ` Felix Fietkau
2021-11-25 12:59 ` Bartosz Golaszewski
2021-11-26 17:19 ` John Crispin
11 siblings, 2 replies; 24+ messages in thread
From: Felix Fietkau @ 2021-11-25 11:07 UTC (permalink / raw)
To: linux-arm-kernel, Rob Herring, Linus Walleij, Bartosz Golaszewski
Cc: john, devicetree, linux-kernel, linux-gpio
From: John Crispin <john@phrozen.org>
Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
GPIOs. Each instance in DT is for an single bank.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
arch/arm/boot/dts/en7523-evb.dts | 8 ++
arch/arm/boot/dts/en7523.dtsi | 21 +++++
drivers/gpio/Kconfig | 9 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-en7523.c | 136 +++++++++++++++++++++++++++++++
5 files changed, 175 insertions(+)
create mode 100644 drivers/gpio/gpio-en7523.c
diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
index af1a8dd40a41..4082bf61bd79 100644
--- a/arch/arm/boot/dts/en7523-evb.dts
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -37,3 +37,11 @@ &pcie0 {
&pcie1 {
status = "okay";
};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
index d9bdb51614b5..6e0275984b69 100644
--- a/arch/arm/boot/dts/en7523.dtsi
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/en7523-clk.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
interrupt-parent = <&gic>;
@@ -120,6 +121,26 @@ uart1: serial@1fbf0000 {
status = "okay";
};
+ gpio0: gpio@1fbf0200 {
+ compatible = "airoha,en7523-gpio";
+ reg = <0x1fbf0204 0x4>,
+ <0x1fbf0200 0x4>,
+ <0x1fbf0220 0x4>,
+ <0x1fbf0214 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio1: gpio@1fbf0270 {
+ compatible = "airoha,en7523-gpio";
+ reg = <0x1fbf0270 0x4>,
+ <0x1fbf0260 0x4>,
+ <0x1fbf0264 0x4>,
+ <0x1fbf0278 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
pcie: pcie@1a140000 {
compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
device_type = "pci";
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 072ed610f9c6..e4a34272504f 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -247,6 +247,15 @@ config GPIO_EM
help
Say yes here to support GPIO on Renesas Emma Mobile SoCs.
+config GPIO_EN7523
+ tristate "Airoha GPIO support"
+ depends on ARCH_AIROHA
+ default ARCH_AIROHA
+ select GPIO_GENERIC
+ select GPIOLIB_IRQCHIP
+ help
+ Say yes here to support the GPIO controller on Airoha EN7523.
+
config GPIO_EP93XX
def_bool y
depends on ARCH_EP93XX
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 71ee9fc2ff83..d2269ee0948e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o
obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o
obj-$(CONFIG_GPIO_EIC_SPRD) += gpio-eic-sprd.o
obj-$(CONFIG_GPIO_EM) += gpio-em.o
+obj-$(CONFIG_GPIO_EN7523) += gpio-en7523.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
obj-$(CONFIG_GPIO_EXAR) += gpio-exar.o
obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
diff --git a/drivers/gpio/gpio-en7523.c b/drivers/gpio/gpio-en7523.c
new file mode 100644
index 000000000000..3ae0d9831d83
--- /dev/null
+++ b/drivers/gpio/gpio-en7523.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/gpio/driver.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+#define AIROHA_GPIO_MAX 32
+
+/**
+ * airoha_gpio_ctrl - Airoha GPIO driver data
+ *
+ * @gc: Associated gpio_chip instance.
+ * @data: The data register.
+ * @dir0: The direction register for the lower 16 pins.
+ * @dir1: The direction register for the lower 16 pins.
+ * @output: The output enable register.
+ */
+struct airoha_gpio_ctrl {
+ struct gpio_chip gc;
+ void __iomem *data;
+ void __iomem *dir[2];
+ void __iomem *output;
+};
+
+static struct airoha_gpio_ctrl *gc_to_ctrl(struct gpio_chip *gc)
+{
+ return container_of(gc, struct airoha_gpio_ctrl, gc);
+}
+
+static int airoha_dir_set(struct gpio_chip *gc, unsigned int gpio,
+ int val, int out)
+{
+ struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
+ u32 dir = ioread32(ctrl->dir[gpio / 16]);
+ u32 output = ioread32(ctrl->output);
+ u32 mask = BIT((gpio % 16) * 2);
+
+ if (out) {
+ dir |= mask;
+ output |= BIT(gpio);
+ } else {
+ dir &= ~mask;
+ output &= ~BIT(gpio);
+ }
+
+ iowrite32(dir, ctrl->dir[gpio / 16]);
+ iowrite32(output, ctrl->output);
+
+ if (out)
+ gc->set(gc, gpio, val);
+
+ return 0;
+}
+
+static int airoha_dir_out(struct gpio_chip *gc, unsigned int gpio,
+ int val)
+{
+ return airoha_dir_set(gc, gpio, val, 1);
+}
+
+static int airoha_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ return airoha_dir_set(gc, gpio, 0, 0);
+}
+
+static int airoha_get_dir(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
+ u32 dir = ioread32(ctrl->dir[gpio / 16]);
+ u32 mask = BIT((gpio % 16) * 2);
+
+ return dir & mask;
+}
+
+static const struct of_device_id airoha_gpio_of_match[] = {
+ { .compatible = "airoha,en7523-gpio" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, airoha_gpio_of_match);
+
+static int airoha_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct airoha_gpio_ctrl *ctrl;
+ int err;
+
+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl)
+ return -ENOMEM;
+
+ ctrl->data = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(ctrl->data))
+ return PTR_ERR(ctrl->data);
+
+ ctrl->dir[0] = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(ctrl->dir[0]))
+ return PTR_ERR(ctrl->dir[0]);
+
+ ctrl->dir[1] = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(ctrl->dir[1]))
+ return PTR_ERR(ctrl->dir[1]);
+
+ ctrl->output = devm_platform_ioremap_resource(pdev, 3);
+ if (IS_ERR(ctrl->output))
+ return PTR_ERR(ctrl->output);
+
+ err = bgpio_init(&ctrl->gc, dev, 4, ctrl->data, NULL,
+ NULL, NULL, NULL, 0);
+ if (err) {
+ dev_err(dev, "unable to init generic GPIO");
+ return err;
+ }
+
+ ctrl->gc.ngpio = AIROHA_GPIO_MAX;
+ ctrl->gc.owner = THIS_MODULE;
+ ctrl->gc.direction_output = airoha_dir_out;
+ ctrl->gc.direction_input = airoha_dir_in;
+ ctrl->gc.get_direction = airoha_get_dir;
+
+ return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
+}
+
+static struct platform_driver airoha_gpio_driver = {
+ .driver = {
+ .name = "airoha-gpio",
+ .of_match_table = airoha_gpio_of_match,
+ },
+ .probe = airoha_gpio_probe,
+};
+module_platform_driver(airoha_gpio_driver);
+
+MODULE_DESCRIPTION("Airoha GPIO support");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
+MODULE_LICENSE("GPL v2");
--
2.30.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread* Re: [PATCH v4 12/12] gpio: Add support for Airoha EN7523 GPIO controller
2021-11-25 11:07 ` [PATCH v4 12/12] gpio: Add support for Airoha EN7523 " Felix Fietkau
@ 2021-11-25 12:59 ` Bartosz Golaszewski
2021-11-26 16:57 ` Andy Shevchenko
2021-11-26 17:19 ` John Crispin
1 sibling, 1 reply; 24+ messages in thread
From: Bartosz Golaszewski @ 2021-11-25 12:59 UTC (permalink / raw)
To: Felix Fietkau
Cc: Linux ARM, Rob Herring, Linus Walleij, John Crispin, devicetree,
Linux Kernel Mailing List, open list:GPIO SUBSYSTEM
On Thu, Nov 25, 2021 at 12:24 PM Felix Fietkau <nbd@nbd.name> wrote:
>
> From: John Crispin <john@phrozen.org>
>
> Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
> GPIOs. Each instance in DT is for an single bank.
>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> ---
> arch/arm/boot/dts/en7523-evb.dts | 8 ++
> arch/arm/boot/dts/en7523.dtsi | 21 +++++
> drivers/gpio/Kconfig | 9 ++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-en7523.c | 136 +++++++++++++++++++++++++++++++
> 5 files changed, 175 insertions(+)
> create mode 100644 drivers/gpio/gpio-en7523.c
These changes should be split into two separate patches. Other than
that the driver looks good.
>
> diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
> index af1a8dd40a41..4082bf61bd79 100644
> --- a/arch/arm/boot/dts/en7523-evb.dts
> +++ b/arch/arm/boot/dts/en7523-evb.dts
> @@ -37,3 +37,11 @@ &pcie0 {
> &pcie1 {
> status = "okay";
> };
> +
> +&gpio0 {
> + status = "okay";
> +};
> +
> +&gpio1 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
> index d9bdb51614b5..6e0275984b69 100644
> --- a/arch/arm/boot/dts/en7523.dtsi
> +++ b/arch/arm/boot/dts/en7523.dtsi
> @@ -3,6 +3,7 @@
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/clock/en7523-clk.h>
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> interrupt-parent = <&gic>;
> @@ -120,6 +121,26 @@ uart1: serial@1fbf0000 {
> status = "okay";
> };
>
> + gpio0: gpio@1fbf0200 {
> + compatible = "airoha,en7523-gpio";
> + reg = <0x1fbf0204 0x4>,
> + <0x1fbf0200 0x4>,
> + <0x1fbf0220 0x4>,
> + <0x1fbf0214 0x4>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpio1: gpio@1fbf0270 {
> + compatible = "airoha,en7523-gpio";
> + reg = <0x1fbf0270 0x4>,
> + <0x1fbf0260 0x4>,
> + <0x1fbf0264 0x4>,
> + <0x1fbf0278 0x4>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> pcie: pcie@1a140000 {
> compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
> device_type = "pci";
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 072ed610f9c6..e4a34272504f 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -247,6 +247,15 @@ config GPIO_EM
> help
> Say yes here to support GPIO on Renesas Emma Mobile SoCs.
>
> +config GPIO_EN7523
> + tristate "Airoha GPIO support"
> + depends on ARCH_AIROHA
> + default ARCH_AIROHA
> + select GPIO_GENERIC
> + select GPIOLIB_IRQCHIP
> + help
> + Say yes here to support the GPIO controller on Airoha EN7523.
> +
> config GPIO_EP93XX
> def_bool y
> depends on ARCH_EP93XX
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 71ee9fc2ff83..d2269ee0948e 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o
> obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o
> obj-$(CONFIG_GPIO_EIC_SPRD) += gpio-eic-sprd.o
> obj-$(CONFIG_GPIO_EM) += gpio-em.o
> +obj-$(CONFIG_GPIO_EN7523) += gpio-en7523.o
> obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
> obj-$(CONFIG_GPIO_EXAR) += gpio-exar.o
> obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
> diff --git a/drivers/gpio/gpio-en7523.c b/drivers/gpio/gpio-en7523.c
> new file mode 100644
> index 000000000000..3ae0d9831d83
> --- /dev/null
> +++ b/drivers/gpio/gpio-en7523.c
> @@ -0,0 +1,136 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/gpio/driver.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +
> +#define AIROHA_GPIO_MAX 32
> +
> +/**
> + * airoha_gpio_ctrl - Airoha GPIO driver data
> + *
> + * @gc: Associated gpio_chip instance.
> + * @data: The data register.
> + * @dir0: The direction register for the lower 16 pins.
> + * @dir1: The direction register for the lower 16 pins.
> + * @output: The output enable register.
> + */
> +struct airoha_gpio_ctrl {
> + struct gpio_chip gc;
> + void __iomem *data;
> + void __iomem *dir[2];
> + void __iomem *output;
> +};
> +
> +static struct airoha_gpio_ctrl *gc_to_ctrl(struct gpio_chip *gc)
> +{
> + return container_of(gc, struct airoha_gpio_ctrl, gc);
> +}
> +
> +static int airoha_dir_set(struct gpio_chip *gc, unsigned int gpio,
> + int val, int out)
> +{
> + struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
> + u32 dir = ioread32(ctrl->dir[gpio / 16]);
> + u32 output = ioread32(ctrl->output);
> + u32 mask = BIT((gpio % 16) * 2);
> +
> + if (out) {
> + dir |= mask;
> + output |= BIT(gpio);
> + } else {
> + dir &= ~mask;
> + output &= ~BIT(gpio);
> + }
> +
> + iowrite32(dir, ctrl->dir[gpio / 16]);
> + iowrite32(output, ctrl->output);
> +
> + if (out)
> + gc->set(gc, gpio, val);
> +
> + return 0;
> +}
No locking needed here? gpio-mmio uses bgpio_lock from struct
gpio_chip, maybe you should take it here too?
Bart
> +
> +static int airoha_dir_out(struct gpio_chip *gc, unsigned int gpio,
> + int val)
> +{
> + return airoha_dir_set(gc, gpio, val, 1);
> +}
> +
> +static int airoha_dir_in(struct gpio_chip *gc, unsigned int gpio)
> +{
> + return airoha_dir_set(gc, gpio, 0, 0);
> +}
> +
> +static int airoha_get_dir(struct gpio_chip *gc, unsigned int gpio)
> +{
> + struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
> + u32 dir = ioread32(ctrl->dir[gpio / 16]);
> + u32 mask = BIT((gpio % 16) * 2);
> +
> + return dir & mask;
> +}
> +
> +static const struct of_device_id airoha_gpio_of_match[] = {
> + { .compatible = "airoha,en7523-gpio" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, airoha_gpio_of_match);
> +
> +static int airoha_gpio_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct airoha_gpio_ctrl *ctrl;
> + int err;
> +
> + ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
> + if (!ctrl)
> + return -ENOMEM;
> +
> + ctrl->data = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(ctrl->data))
> + return PTR_ERR(ctrl->data);
> +
> + ctrl->dir[0] = devm_platform_ioremap_resource(pdev, 1);
> + if (IS_ERR(ctrl->dir[0]))
> + return PTR_ERR(ctrl->dir[0]);
> +
> + ctrl->dir[1] = devm_platform_ioremap_resource(pdev, 2);
> + if (IS_ERR(ctrl->dir[1]))
> + return PTR_ERR(ctrl->dir[1]);
> +
> + ctrl->output = devm_platform_ioremap_resource(pdev, 3);
> + if (IS_ERR(ctrl->output))
> + return PTR_ERR(ctrl->output);
> +
> + err = bgpio_init(&ctrl->gc, dev, 4, ctrl->data, NULL,
> + NULL, NULL, NULL, 0);
> + if (err) {
> + dev_err(dev, "unable to init generic GPIO");
> + return err;
> + }
> +
> + ctrl->gc.ngpio = AIROHA_GPIO_MAX;
> + ctrl->gc.owner = THIS_MODULE;
> + ctrl->gc.direction_output = airoha_dir_out;
> + ctrl->gc.direction_input = airoha_dir_in;
> + ctrl->gc.get_direction = airoha_get_dir;
> +
> + return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
> +}
> +
> +static struct platform_driver airoha_gpio_driver = {
> + .driver = {
> + .name = "airoha-gpio",
> + .of_match_table = airoha_gpio_of_match,
> + },
> + .probe = airoha_gpio_probe,
> +};
> +module_platform_driver(airoha_gpio_driver);
> +
> +MODULE_DESCRIPTION("Airoha GPIO support");
> +MODULE_AUTHOR("John Crispin <john@phrozen.org>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.30.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [PATCH v4 12/12] gpio: Add support for Airoha EN7523 GPIO controller
2021-11-25 12:59 ` Bartosz Golaszewski
@ 2021-11-26 16:57 ` Andy Shevchenko
0 siblings, 0 replies; 24+ messages in thread
From: Andy Shevchenko @ 2021-11-26 16:57 UTC (permalink / raw)
To: Bartosz Golaszewski
Cc: Felix Fietkau, Linux ARM, Rob Herring, Linus Walleij,
John Crispin, devicetree, Linux Kernel Mailing List,
open list:GPIO SUBSYSTEM
On Fri, Nov 26, 2021 at 6:40 PM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
> On Thu, Nov 25, 2021 at 12:24 PM Felix Fietkau <nbd@nbd.name> wrote:
> >
> > From: John Crispin <john@phrozen.org>
> >
> > Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
> > GPIOs. Each instance in DT is for an single bank.
a single
...
> > + err = bgpio_init(&ctrl->gc, dev, 4, ctrl->data, NULL,
> > + NULL, NULL, NULL, 0);
> > + if (err) {
> > + dev_err(dev, "unable to init generic GPIO");
> > + return err;
> > + }
Since it will be a new version you may have a chance to replace this with
return dev_err_probe(dev, err, ...);
--
With Best Regards,
Andy Shevchenko
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v4 12/12] gpio: Add support for Airoha EN7523 GPIO controller
2021-11-25 11:07 ` [PATCH v4 12/12] gpio: Add support for Airoha EN7523 " Felix Fietkau
2021-11-25 12:59 ` Bartosz Golaszewski
@ 2021-11-26 17:19 ` John Crispin
1 sibling, 0 replies; 24+ messages in thread
From: John Crispin @ 2021-11-26 17:19 UTC (permalink / raw)
To: Felix Fietkau, linux-arm-kernel, Rob Herring, Linus Walleij,
Bartosz Golaszewski
Cc: devicetree, linux-kernel, linux-gpio
On 25.11.21 12:07, Felix Fietkau wrote:
> + * @dir1: The direction register for the lower 16 pins.
s/lower/higher/
just spotted that one aswell
John
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread