From: Li Yang <leoyang.li@nxp.com>
To: Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/6] arm64: dts: ls2080a-qds: add mdio mux nodes from on-board FPGA
Date: Thu, 17 Mar 2022 14:01:04 -0500 [thread overview]
Message-ID: <20220317190109.3742-1-leoyang.li@nxp.com> (raw)
Add mmio mdio mux nodes from the on-board FPGA.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
.../boot/dts/freescale/fsl-ls2080a-qds.dts | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
index f6c3ee78ace0..c3caca1c0ab6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -23,3 +23,72 @@ chosen {
stdout-path = "serial0:115200n8";
};
};
+
+/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
+&dpmac9 {
+ phy-handle = <&mdio0_phy12>;
+ phy-connection-type = "sgmii";
+};
+
+&dpmac10 {
+ phy-handle = <&mdio0_phy13>;
+ phy-connection-type = "sgmii";
+};
+
+&dpmac11 {
+ phy-handle = <&mdio0_phy14>;
+ phy-connection-type = "sgmii";
+};
+
+&dpmac12 {
+ phy-handle = <&mdio0_phy15>;
+ phy-connection-type = "sgmii";
+};
+
+&ifc {
+ boardctrl: board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-mfd";
+ reg = <3 0 0x300>;
+ ranges = <0 3 0 0x300>;
+
+ mdio_mux_emi1 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&emdio1>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1_MDIO */
+
+ #address-cells=<1>;
+ #size-cells = <0>;
+
+ /* Child MDIO buses, one for each riser card:
+ * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
+ * VSC8234 PHYs on the riser cards.
+ */
+
+ mdio_mux3: mdio@60 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio0_phy12: mdio_phy0@1c {
+ reg = <0x1c>;
+ };
+
+ mdio0_phy13: mdio_phy1@1d {
+ reg = <0x1d>;
+ };
+
+ mdio0_phy14: mdio_phy2@1e {
+ reg = <0x1e>;
+ };
+
+ mdio0_phy15: mdio_phy3@1f {
+ reg = <0x1f>;
+ };
+ };
+ };
+ };
+};
+
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-03-17 19:02 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-17 19:01 Li Yang [this message]
2022-03-17 19:01 ` [PATCH 2/6] arm64: dts: ls2088a-qds: add mdio mux nodes from on-board FPGA Li Yang
2022-03-17 19:01 ` [PATCH 3/6] arm64: dts: ls2080a-rdb: add phy nodes Li Yang
2022-04-10 1:12 ` Shawn Guo
2022-03-17 19:01 ` [PATCH 4/6] arm64: dts: ls2081a-rdb: Add DTS support for NXP LS2081ARDB Li Yang
2022-04-10 1:19 ` Shawn Guo
2022-03-17 19:01 ` [PATCH 5/6] arm64: dts: ls208xa-rdb: fix errata E-00013 Li Yang
2022-04-10 1:25 ` Shawn Guo
2022-03-17 19:01 ` [PATCH 6/6] arm64: dts: ls208x: remove NXP Erratum A008585 from LS2088A Li Yang
2022-04-10 1:27 ` Shawn Guo
2022-04-10 1:10 ` [PATCH 1/6] arm64: dts: ls2080a-qds: add mdio mux nodes from on-board FPGA Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220317190109.3742-1-leoyang.li@nxp.com \
--to=leoyang.li@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).