* [PATCH v2] ARM: dts: kirkwood: Add Endian 4i Edge 200 board
@ 2022-10-03 7:34 Pawel Dembicki
2022-11-29 22:27 ` Paweł Dembicki
2022-11-30 0:18 ` Andrew Lunn
0 siblings, 2 replies; 3+ messages in thread
From: Pawel Dembicki @ 2022-10-03 7:34 UTC (permalink / raw)
To: devicetree, linux-arm-kernel, Gregory Clement, Andrew Lunn; +Cc: Pawel Dembicki
Add Endian 4i Edge 200 is 5-port firewall.
It have also clone: Endian UTM Mini (The same hardware, with added WLAN
card).
Hardware:
- SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
- Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
- NAND Flash: 512MB (Micron 29F4G08AAC)
- Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2)
- Lan 5: 1x GBE (Marvell 88E1116R-NNC1)
- Storage: MicroSD Slot
- MCPIE: MiniPCIe Slot present [fitted with SparkLan WPEA-110N/E
(Atheros AR9280 chipset) in Endian UTM Mini WLAN only]
- USB: 1x USB 2.0 port
- Console: RJ-45 port
- LEDs: 3x GPIO controlled
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
Changes in v2:
- added MIT licence option
- removed "cpu" switch port label.
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/kirkwood-4i-edge-200.dts | 205 +++++++++++++++++++++
2 files changed, 206 insertions(+)
create mode 100644 arch/arm/boot/dts/kirkwood-4i-edge-200.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index eae7d1139fbc..81a24fe623a8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -299,6 +299,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \
keystone-k2g-evm.dtb \
keystone-k2g-ice.dtb
dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-4i-edge-200.dtb \
kirkwood-b3.dtb \
kirkwood-blackarmor-nas220.dtb \
kirkwood-c200-v1.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-4i-edge-200.dts b/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
new file mode 100644
index 000000000000..b1749d3f60b7
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Endian 4i Edge 200 Board Description
+ * Note: Endian UTM Mini is hardware clone of Endian Edge 200
+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Endian 4i Edge 200";
+ compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led>;
+ pinctrl-names = "default";
+
+ led-1 {
+ function = LED_FUNCTION_SD;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+
+ led-2 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-3 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+};
+
+ð0port {
+ speed = <1000>;
+ duplex = <1>;
+};
+
+ð1 {
+ status = "okay";
+};
+
+ð1port {
+ phy-handle = <ðphyb>;
+};
+
+&mdio {
+ status = "okay";
+
+ ethphyb: ethernet-phy@b {
+ reg = <0x0b>;
+
+ marvell,reg-init =
+ /* link-activity, bi-color mode 4 */
+ <3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */
+ };
+
+ switch0: switch@11 {
+ compatible = "marvell,mv88e6085";
+ reg = <0x11>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "port1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "port2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "port3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "port4";
+ };
+
+ port@5 {
+ reg = <5>;
+ phy-mode = "rgmii-id";
+ ethernet = <ð0port>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x000a0000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "u-boot-env";
+ reg = <0x000a0000 0x00060000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "kernel";
+ reg = <0x00100000 0x00400000>;
+ };
+
+ partition@500000 {
+ label = "ubi";
+ reg = <0x00500000 0x1fb00000>;
+ };
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_sysrst>;
+ pinctrl-names = "default";
+
+ pmx_sysrst: pmx-sysrst {
+ marvell,pins = "mpp6";
+ marvell,function = "sysrst";
+ };
+
+ pmx_sdio_cd: pmx-sdio-cd {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_led: pmx-led {
+ marvell,pins = "mpp34", "mpp35", "mpp49";
+ marvell,function = "gpio";
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata_phy0 {
+ status = "disabled";
+};
+
+&sata_phy1 {
+ status = "disabled";
+};
+
+&sdio {
+ pinctrl-0 = <&pmx_sdio_cd>;
+ pinctrl-names = "default";
+ status = "okay";
+ cd-gpios = <&gpio0 28 9>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] ARM: dts: kirkwood: Add Endian 4i Edge 200 board
2022-10-03 7:34 [PATCH v2] ARM: dts: kirkwood: Add Endian 4i Edge 200 board Pawel Dembicki
@ 2022-11-29 22:27 ` Paweł Dembicki
2022-11-30 0:18 ` Andrew Lunn
1 sibling, 0 replies; 3+ messages in thread
From: Paweł Dembicki @ 2022-11-29 22:27 UTC (permalink / raw)
To: devicetree, linux-arm-kernel, Gregory Clement, Andrew Lunn
pon., 3 paź 2022 o 09:34 Pawel Dembicki <paweldembicki@gmail.com> napisał(a):
>
> Add Endian 4i Edge 200 is 5-port firewall.
> It have also clone: Endian UTM Mini (The same hardware, with added WLAN
> card).
>
> Hardware:
> - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
> - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
> - NAND Flash: 512MB (Micron 29F4G08AAC)
> - Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2)
> - Lan 5: 1x GBE (Marvell 88E1116R-NNC1)
> - Storage: MicroSD Slot
> - MCPIE: MiniPCIe Slot present [fitted with SparkLan WPEA-110N/E
> (Atheros AR9280 chipset) in Endian UTM Mini WLAN only]
> - USB: 1x USB 2.0 port
> - Console: RJ-45 port
> - LEDs: 3x GPIO controlled
>
> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
> ---
> Changes in v2:
> - added MIT licence option
> - removed "cpu" switch port label.
>
Hi all,
Gentle reminder for this patch.
Best Regards,
Paweł Dembicki
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] ARM: dts: kirkwood: Add Endian 4i Edge 200 board
2022-10-03 7:34 [PATCH v2] ARM: dts: kirkwood: Add Endian 4i Edge 200 board Pawel Dembicki
2022-11-29 22:27 ` Paweł Dembicki
@ 2022-11-30 0:18 ` Andrew Lunn
1 sibling, 0 replies; 3+ messages in thread
From: Andrew Lunn @ 2022-11-30 0:18 UTC (permalink / raw)
To: Pawel Dembicki; +Cc: devicetree, linux-arm-kernel, Gregory Clement
On Mon, Oct 03, 2022 at 09:34:43AM +0200, Pawel Dembicki wrote:
> Add Endian 4i Edge 200 is 5-port firewall.
> It have also clone: Endian UTM Mini (The same hardware, with added WLAN
> card).
>
> Hardware:
> - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
> - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
> - NAND Flash: 512MB (Micron 29F4G08AAC)
> - Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2)
> - Lan 5: 1x GBE (Marvell 88E1116R-NNC1)
> - Storage: MicroSD Slot
> - MCPIE: MiniPCIe Slot present [fitted with SparkLan WPEA-110N/E
> (Atheros AR9280 chipset) in Endian UTM Mini WLAN only]
> - USB: 1x USB 2.0 port
> - Console: RJ-45 port
> - LEDs: 3x GPIO controlled
>
> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-11-30 0:19 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-10-03 7:34 [PATCH v2] ARM: dts: kirkwood: Add Endian 4i Edge 200 board Pawel Dembicki
2022-11-29 22:27 ` Paweł Dembicki
2022-11-30 0:18 ` Andrew Lunn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).