* [PATCH 00/21] ARM: s3c: clean out obsolete platforms
@ 2022-10-21 20:22 Arnd Bergmann
2022-10-21 20:27 ` [PATCH 01/21] ARM: s3c: remove all s3c24xx support Arnd Bergmann
` (22 more replies)
0 siblings, 23 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:22 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
linux-doc, linux-samsung-soc, devicetree, patches, linux-stm32,
linux-ide, linux-clk, linux-pm, dmaengine, linux-hwmon,
linux-i2c, linux-iio, linux-input, linux-leds, linux-media,
linux-mmc, linux-mtd, linux-gpio, linux-rtc, linux-spi,
linux-serial, linux-usb, linux-fbdev, dri-devel, linux-watchdog,
alsa-devel, linux-pwm
From: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform was marked as deprecated a while ago,
and for the s3c64xx platform, we marked all except one legacy
board file as unused.
This series removes all of those, leaving only s3c64xx support
for DT based boots as well as the cragg6410 board file.
About half of the s3c specific drivers were only used on
the now removed machines, so these drivers can be retired
as well. I can either merge the driver removal patches through
the soc tree along with the board file patches, or subsystem
maintainers can pick them up into their own trees, whichever
they prefer.
Arnd Bergmann (21):
ARM: s3c: remove all s3c24xx support
ARM: s3c: remove s3c24xx specific hacks
ARM: s3c: remove most s3c64xx board support
ARM: s3c: remove adc.c
ARM: s3c: simplify platform code
ARM: s3c: remove s3c6400 support
power: remove s3c adc battery driver
hwmon: remove s3c driver
pata: remove samsung_cf driver
mmc: remove s3cmci driver
clk: remove s3c24xx driver
leds: remove s3c24xx driver
usb: gadget: remove s3c24xx drivers
dmaengine: remove s3c24xx driver
cpufreq: remove s3c24xx drivers
fbdev: remove s3c2410 framebuffer
input: remove s3c24xx touchscreen driver
pinctrl: remove s3c24xx driver
spi: remove s3c24xx driver
soc: s3c: remove pm-debug hack
ASoC: samsung: remove unused drivers
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Bcc: Alim Akhtar <alim.akhtar@samsung.com>
Bcc: Rob Herring <robh+dt@kernel.org>
Bcc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Bcc: Sergey Shtylyov <s.shtylyov@omp.ru>
Bcc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Bcc: Tomasz Figa <tomasz.figa@gmail.com>
Bcc: Chanwoo Choi <cw00.choi@samsung.com>
Bcc: Michael Turquette <mturquette@baylibre.com>
Bcc: Stephen Boyd <sboyd@kernel.org>
Bcc: Daniel Lezcano <daniel.lezcano@linaro.org>
Bcc: Thomas Gleixner <tglx@linutronix.de>
Bcc: "Rafael J. Wysocki" <rafael@kernel.org>
Bcc: Viresh Kumar <viresh.kumar@linaro.org>
Bcc: Vinod Koul <vkoul@kernel.org>
Bcc: Jean Delvare <jdelvare@suse.com>
Bcc: Guenter Roeck <linux@roeck-us.net>
Bcc: Jonathan Cameron <jic23@kernel.org>
Bcc: Lars-Peter Clausen <lars@metafoo.de>
Bcc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Bcc: Pavel Machek <pavel@ucw.cz>
Bcc: Mauro Carvalho Chehab <mchehab@kernel.org>
Bcc: Ulf Hansson <ulf.hansson@linaro.org>
Bcc: Miquel Raynal <miquel.raynal@bootlin.com>
Bcc: Richard Weinberger <richard@nod.at>
Bcc: Vignesh Raghavendra <vigneshr@ti.com>
Bcc: Linus Walleij <linus.walleij@linaro.org>
Bcc: Sebastian Reichel <sre@kernel.org>
Bcc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Bcc: Mark Brown <broonie@kernel.org>
Bcc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bcc: Jiri Slaby <jirislaby@kernel.org>
Bcc: Felipe Balbi <balbi@kernel.org>
Bcc: Helge Deller <deller@gmx.de>
Bcc: Wim Van Sebroeck <wim@linux-watchdog.org>
Bcc: Liam Girdwood <lgirdwood@gmail.com>
Bcc: Thierry Reding <thierry.reding@gmail.com>
Bcc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: patches@opensource.cirrus.com
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-ide@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: dmaengine@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-watchdog@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-pwm@vger.kernel.org
Documentation/arm/index.rst | 1 -
Documentation/arm/samsung-s3c24xx/cpufreq.rst | 77 -
.../arm/samsung-s3c24xx/eb2410itx.rst | 59 -
Documentation/arm/samsung-s3c24xx/gpio.rst | 172 --
Documentation/arm/samsung-s3c24xx/h1940.rst | 41 -
Documentation/arm/samsung-s3c24xx/index.rst | 20 -
Documentation/arm/samsung-s3c24xx/nand.rst | 30 -
.../arm/samsung-s3c24xx/overview.rst | 311 ---
Documentation/arm/samsung-s3c24xx/s3c2412.rst | 121 -
Documentation/arm/samsung-s3c24xx/s3c2413.rst | 22 -
.../arm/samsung-s3c24xx/smdk2440.rst | 57 -
Documentation/arm/samsung-s3c24xx/suspend.rst | 137 --
.../arm/samsung-s3c24xx/usb-host.rst | 91 -
Documentation/arm/samsung/overview.rst | 13 -
MAINTAINERS | 31 -
arch/arm/Kconfig | 3 +-
arch/arm/Kconfig.debug | 58 +-
arch/arm/Makefile | 2 -
arch/arm/boot/dts/Makefile | 2 -
arch/arm/boot/dts/s3c2410-pinctrl.h | 19 -
arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 172 --
arch/arm/boot/dts/s3c2416-smdk2416.dts | 77 -
arch/arm/boot/dts/s3c2416.dtsi | 124 --
arch/arm/boot/dts/s3c24xx.dtsi | 92 -
arch/arm/configs/mini2440_defconfig | 338 ---
arch/arm/configs/s3c2410_defconfig | 437 ----
arch/arm/configs/tct_hammer_defconfig | 58 -
arch/arm/include/debug/s3c24xx.S | 10 -
arch/arm/mach-s3c/Kconfig | 92 +-
arch/arm/mach-s3c/Kconfig.s3c24xx | 604 -----
arch/arm/mach-s3c/Kconfig.s3c64xx | 212 --
arch/arm/mach-s3c/Makefile | 12 -
arch/arm/mach-s3c/Makefile.s3c24xx | 102 -
arch/arm/mach-s3c/Makefile.s3c64xx | 15 -
arch/arm/mach-s3c/adc-core.h | 24 -
arch/arm/mach-s3c/adc.c | 510 -----
arch/arm/mach-s3c/anubis.h | 50 -
arch/arm/mach-s3c/ata-core-s3c64xx.h | 24 -
arch/arm/mach-s3c/backlight-s3c64xx.h | 22 -
arch/arm/mach-s3c/bast-ide.c | 82 -
arch/arm/mach-s3c/bast-irq.c | 137 --
arch/arm/mach-s3c/bast.h | 194 --
arch/arm/mach-s3c/common-smdk-s3c24xx.c | 228 --
arch/arm/mach-s3c/common-smdk-s3c24xx.h | 11 -
arch/arm/mach-s3c/cpu.h | 47 -
arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c | 94 -
arch/arm/mach-s3c/dev-audio-s3c64xx.c | 127 --
arch/arm/mach-s3c/dev-backlight-s3c64xx.c | 137 --
arch/arm/mach-s3c/devs.c | 726 ------
arch/arm/mach-s3c/devs.h | 37 -
arch/arm/mach-s3c/dma-s3c24xx.h | 51 -
arch/arm/mach-s3c/dma-s3c64xx.h | 57 -
arch/arm/mach-s3c/dma.h | 9 -
arch/arm/mach-s3c/fb-core-s3c24xx.h | 24 -
arch/arm/mach-s3c/gpio-cfg-helpers.h | 124 --
arch/arm/mach-s3c/gpio-cfg.h | 19 -
arch/arm/mach-s3c/gpio-core.h | 3 -
arch/arm/mach-s3c/gpio-samsung-s3c24xx.h | 103 -
arch/arm/mach-s3c/gpio-samsung.c | 443 +---
arch/arm/mach-s3c/gpio-samsung.h | 7 -
arch/arm/mach-s3c/gta02.h | 20 -
arch/arm/mach-s3c/h1940-bluetooth.c | 140 --
arch/arm/mach-s3c/h1940.h | 52 -
arch/arm/mach-s3c/hardware-s3c24xx.h | 14 -
arch/arm/mach-s3c/iic-core.h | 7 -
arch/arm/mach-s3c/init.c | 26 +-
arch/arm/mach-s3c/iotiming-s3c2410.c | 472 ----
arch/arm/mach-s3c/iotiming-s3c2412.c | 278 ---
arch/arm/mach-s3c/irq-pm-s3c24xx.c | 115 -
arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c | 9 -
arch/arm/mach-s3c/irq-s3c24xx-fiq.S | 112 -
arch/arm/mach-s3c/irq-s3c24xx.c | 1352 -----------
arch/arm/mach-s3c/irqs-s3c24xx.h | 219 --
arch/arm/mach-s3c/irqs.h | 7 -
arch/arm/mach-s3c/mach-amlm5900.c | 248 ---
arch/arm/mach-s3c/mach-anubis.c | 422 ----
arch/arm/mach-s3c/mach-anw6410.c | 230 --
arch/arm/mach-s3c/mach-at2440evb.c | 233 --
arch/arm/mach-s3c/mach-bast.c | 583 -----
arch/arm/mach-s3c/mach-crag6410.c | 1 -
arch/arm/mach-s3c/mach-gta02.c | 588 -----
arch/arm/mach-s3c/mach-h1940.c | 809 -------
arch/arm/mach-s3c/mach-hmt.c | 282 ---
arch/arm/mach-s3c/mach-jive.c | 693 ------
arch/arm/mach-s3c/mach-mini2440.c | 804 -------
arch/arm/mach-s3c/mach-mini6410.c | 365 ---
arch/arm/mach-s3c/mach-n30.c | 682 ------
arch/arm/mach-s3c/mach-ncp.c | 100 -
arch/arm/mach-s3c/mach-nexcoder.c | 162 --
arch/arm/mach-s3c/mach-osiris-dvs.c | 178 --
arch/arm/mach-s3c/mach-osiris.c | 405 ----
arch/arm/mach-s3c/mach-otom.c | 124 --
arch/arm/mach-s3c/mach-qt2410.c | 375 ----
arch/arm/mach-s3c/mach-real6410.c | 333 ---
arch/arm/mach-s3c/mach-rx1950.c | 884 --------
arch/arm/mach-s3c/mach-rx3715.c | 213 --
arch/arm/mach-s3c/mach-s3c2416-dt.c | 48 -
arch/arm/mach-s3c/mach-smartq.c | 424 ----
arch/arm/mach-s3c/mach-smartq.h | 16 -
arch/arm/mach-s3c/mach-smartq5.c | 154 --
arch/arm/mach-s3c/mach-smartq7.c | 170 --
arch/arm/mach-s3c/mach-smdk2410.c | 112 -
arch/arm/mach-s3c/mach-smdk2413.c | 169 --
arch/arm/mach-s3c/mach-smdk2416.c | 248 ---
arch/arm/mach-s3c/mach-smdk2440.c | 180 --
arch/arm/mach-s3c/mach-smdk2443.c | 126 --
arch/arm/mach-s3c/mach-smdk6400.c | 90 -
arch/arm/mach-s3c/mach-smdk6410.c | 706 ------
arch/arm/mach-s3c/mach-tct_hammer.c | 157 --
arch/arm/mach-s3c/mach-vr1000.c | 364 ---
arch/arm/mach-s3c/mach-vstms.c | 166 --
arch/arm/mach-s3c/map-s3c.h | 37 -
arch/arm/mach-s3c/map-s3c24xx.h | 159 --
arch/arm/mach-s3c/map.h | 7 -
arch/arm/mach-s3c/nand-core-s3c24xx.h | 24 -
arch/arm/mach-s3c/onenand-core-s3c64xx.h | 32 -
arch/arm/mach-s3c/osiris.h | 50 -
arch/arm/mach-s3c/otom.h | 25 -
arch/arm/mach-s3c/pll-s3c2410.c | 83 -
arch/arm/mach-s3c/pll-s3c2440-12000000.c | 95 -
arch/arm/mach-s3c/pll-s3c2440-16934400.c | 122 -
arch/arm/mach-s3c/pm-core-s3c24xx.h | 96 -
arch/arm/mach-s3c/pm-core-s3c64xx.h | 17 -
arch/arm/mach-s3c/pm-core.h | 7 -
arch/arm/mach-s3c/pm-h1940.S | 19 -
arch/arm/mach-s3c/pm-s3c2410.c | 170 --
arch/arm/mach-s3c/pm-s3c2412.c | 126 --
arch/arm/mach-s3c/pm-s3c2416.c | 81 -
arch/arm/mach-s3c/pm-s3c24xx.c | 121 -
arch/arm/mach-s3c/pm-s3c64xx.c | 83 -
arch/arm/mach-s3c/pm.c | 7 +-
arch/arm/mach-s3c/pm.h | 12 -
arch/arm/mach-s3c/regs-adc.h | 64 -
arch/arm/mach-s3c/regs-clock-s3c24xx.h | 146 --
arch/arm/mach-s3c/regs-clock.h | 7 -
arch/arm/mach-s3c/regs-dsc-s3c24xx.h | 22 -
arch/arm/mach-s3c/regs-gpio-s3c24xx.h | 608 -----
arch/arm/mach-s3c/regs-gpio.h | 7 -
arch/arm/mach-s3c/regs-irq-s3c24xx.h | 51 -
arch/arm/mach-s3c/regs-irq.h | 7 -
arch/arm/mach-s3c/regs-mem-s3c24xx.h | 53 -
arch/arm/mach-s3c/regs-s3c2443-clock.h | 238 --
arch/arm/mach-s3c/regs-srom-s3c64xx.h | 55 -
arch/arm/mach-s3c/rtc-core-s3c24xx.h | 23 -
arch/arm/mach-s3c/s3c2410.c | 130 --
arch/arm/mach-s3c/s3c2412-power.h | 34 -
arch/arm/mach-s3c/s3c2412.c | 175 --
arch/arm/mach-s3c/s3c2412.h | 25 -
arch/arm/mach-s3c/s3c2416.c | 132 --
arch/arm/mach-s3c/s3c2440.c | 71 -
arch/arm/mach-s3c/s3c2442.c | 62 -
arch/arm/mach-s3c/s3c2443.c | 112 -
arch/arm/mach-s3c/s3c244x.c | 128 --
arch/arm/mach-s3c/s3c24xx.c | 687 ------
arch/arm/mach-s3c/s3c24xx.h | 124 --
arch/arm/mach-s3c/s3c6400.c | 90 -
arch/arm/mach-s3c/s3c6410.c | 9 -
arch/arm/mach-s3c/s3c64xx.c | 8 -
arch/arm/mach-s3c/sdhci.h | 25 -
arch/arm/mach-s3c/setup-i2c-s3c24xx.c | 23 -
arch/arm/mach-s3c/setup-ide-s3c64xx.c | 40 -
arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c | 31 -
arch/arm/mach-s3c/setup-spi-s3c24xx.c | 27 -
arch/arm/mach-s3c/setup-ts-s3c24xx.c | 29 -
arch/arm/mach-s3c/simtec-audio.c | 76 -
arch/arm/mach-s3c/simtec-nor.c | 74 -
arch/arm/mach-s3c/simtec-pm.c | 60 -
arch/arm/mach-s3c/simtec-usb.c | 125 --
arch/arm/mach-s3c/simtec.h | 17 -
arch/arm/mach-s3c/sleep-s3c2410.S | 54 -
arch/arm/mach-s3c/sleep-s3c2412.S | 53 -
arch/arm/mach-s3c/sleep-s3c24xx.S | 69 -
arch/arm/mach-s3c/sleep-s3c64xx.S | 27 -
arch/arm/mach-s3c/spi-core-s3c24xx.h | 21 -
arch/arm/mach-s3c/vr1000.h | 113 -
drivers/ata/Kconfig | 10 -
drivers/ata/Makefile | 1 -
drivers/ata/pata_samsung_cf.c | 662 ------
drivers/clk/samsung/Kconfig | 32 -
drivers/clk/samsung/Makefile | 4 -
drivers/clk/samsung/clk-s3c2410-dclk.c | 440 ----
drivers/clk/samsung/clk-s3c2410.c | 446 ----
drivers/clk/samsung/clk-s3c2412.c | 254 ---
drivers/clk/samsung/clk-s3c2443.c | 438 ----
drivers/clocksource/Kconfig | 2 +-
drivers/cpufreq/Kconfig.arm | 78 -
drivers/cpufreq/Makefile | 6 -
drivers/cpufreq/s3c2410-cpufreq.c | 155 --
drivers/cpufreq/s3c2412-cpufreq.c | 240 --
drivers/cpufreq/s3c2416-cpufreq.c | 492 ----
drivers/cpufreq/s3c2440-cpufreq.c | 321 ---
drivers/cpufreq/s3c24xx-cpufreq-debugfs.c | 163 --
drivers/cpufreq/s3c24xx-cpufreq.c | 648 ------
drivers/dma/Kconfig | 12 -
drivers/dma/Makefile | 1 -
drivers/dma/s3c24xx-dma.c | 1428 ------------
drivers/hwmon/Kconfig | 17 -
drivers/hwmon/Makefile | 1 -
drivers/hwmon/s3c-hwmon.c | 379 ----
drivers/i2c/busses/Kconfig | 3 +-
drivers/i2c/busses/i2c-s3c2410.c | 72 -
drivers/iio/adc/Kconfig | 6 +-
drivers/input/touchscreen/Kconfig | 12 -
drivers/input/touchscreen/Makefile | 1 -
drivers/input/touchscreen/s3c2410_ts.c | 464 ----
drivers/leds/Kconfig | 8 -
drivers/leds/Makefile | 1 -
drivers/leds/leds-s3c24xx.c | 83 -
.../media/platform/samsung/s3c-camif/Kconfig | 8 +-
drivers/mmc/host/Kconfig | 48 +-
drivers/mmc/host/Makefile | 1 -
drivers/mmc/host/s3cmci.c | 1777 ---------------
drivers/mmc/host/s3cmci.h | 75 -
drivers/mtd/nand/raw/Kconfig | 2 +-
drivers/mtd/nand/raw/s3c2410.c | 60 -
drivers/pinctrl/samsung/Kconfig | 5 -
drivers/pinctrl/samsung/Makefile | 1 -
drivers/pinctrl/samsung/pinctrl-s3c24xx.c | 653 ------
drivers/pinctrl/samsung/pinctrl-samsung.c | 10 -
drivers/power/supply/Kconfig | 6 -
drivers/power/supply/Makefile | 1 -
drivers/power/supply/s3c_adc_battery.c | 453 ----
drivers/rtc/Kconfig | 8 +-
drivers/soc/samsung/Kconfig | 26 +-
drivers/soc/samsung/Makefile | 1 -
drivers/soc/samsung/s3c-pm-debug.c | 79 -
drivers/spi/Kconfig | 18 -
drivers/spi/Makefile | 2 -
drivers/spi/spi-s3c24xx-regs.h | 41 -
drivers/spi/spi-s3c24xx.c | 596 -----
drivers/tty/serial/Kconfig | 8 +-
drivers/tty/serial/samsung_tty.c | 199 --
drivers/usb/gadget/udc/Kconfig | 25 -
drivers/usb/gadget/udc/Makefile | 2 -
drivers/usb/gadget/udc/s3c-hsudc.c | 1319 -----------
drivers/usb/gadget/udc/s3c2410_udc.c | 1980 -----------------
drivers/usb/gadget/udc/s3c2410_udc.h | 99 -
drivers/usb/gadget/udc/s3c2410_udc_regs.h | 146 --
drivers/usb/host/Kconfig | 8 +-
drivers/video/fbdev/Kconfig | 33 +-
drivers/video/fbdev/Makefile | 1 -
drivers/video/fbdev/s3c2410fb-regs-lcd.h | 143 --
drivers/video/fbdev/s3c2410fb.c | 1142 ----------
drivers/video/fbdev/s3c2410fb.h | 48 -
drivers/watchdog/Kconfig | 9 +-
drivers/watchdog/s3c2410_wdt.c | 84 +-
include/dt-bindings/clock/s3c2410.h | 59 -
include/dt-bindings/clock/s3c2412.h | 70 -
include/dt-bindings/clock/s3c2443.h | 91 -
include/linux/amba/pl093.h | 77 -
include/linux/clk/samsung.h | 32 -
.../linux/platform_data/asoc-s3c24xx_simtec.h | 30 -
include/linux/platform_data/ata-samsung_cf.h | 31 -
include/linux/platform_data/clk-s3c2410.h | 19 -
include/linux/platform_data/dma-s3c24xx.h | 48 -
include/linux/platform_data/fb-s3c2410.h | 99 -
include/linux/platform_data/leds-s3c24xx.h | 18 -
include/linux/platform_data/media/s5p_hdmi.h | 32 -
include/linux/platform_data/mmc-s3cmci.h | 51 -
include/linux/platform_data/s3c-hsudc.h | 33 -
include/linux/platform_data/usb-s3c2410_udc.h | 33 -
include/linux/s3c_adc_battery.h | 39 -
include/linux/soc/samsung/s3c-adc.h | 32 -
include/linux/soc/samsung/s3c-cpufreq-core.h | 299 ---
include/linux/soc/samsung/s3c-pm.h | 58 -
include/linux/spi/s3c24xx-fiq.h | 33 -
include/linux/spi/s3c24xx.h | 20 -
include/sound/s3c24xx_uda134x.h | 14 -
sound/soc/samsung/Kconfig | 93 -
sound/soc/samsung/Makefile | 26 -
sound/soc/samsung/h1940_uda1380.c | 224 --
sound/soc/samsung/jive_wm8750.c | 143 --
sound/soc/samsung/neo1973_wm8753.c | 360 ---
sound/soc/samsung/regs-i2s-v2.h | 111 -
sound/soc/samsung/regs-iis.h | 66 -
sound/soc/samsung/rx1950_uda1380.c | 245 --
sound/soc/samsung/s3c-i2s-v2.c | 670 ------
sound/soc/samsung/s3c-i2s-v2.h | 108 -
sound/soc/samsung/s3c2412-i2s.c | 251 ---
sound/soc/samsung/s3c2412-i2s.h | 22 -
sound/soc/samsung/s3c24xx-i2s.c | 463 ----
sound/soc/samsung/s3c24xx-i2s.h | 31 -
sound/soc/samsung/s3c24xx_simtec.c | 372 ----
sound/soc/samsung/s3c24xx_simtec.h | 18 -
sound/soc/samsung/s3c24xx_simtec_hermes.c | 112 -
.../soc/samsung/s3c24xx_simtec_tlv320aic23.c | 100 -
sound/soc/samsung/s3c24xx_uda134x.c | 257 ---
sound/soc/samsung/smartq_wm8987.c | 224 --
sound/soc/samsung/smdk_wm8580.c | 211 --
289 files changed, 48 insertions(+), 48148 deletions(-)
delete mode 100644 Documentation/arm/samsung-s3c24xx/cpufreq.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/eb2410itx.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/gpio.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/h1940.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/index.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/nand.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/overview.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/s3c2412.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/s3c2413.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/smdk2440.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/suspend.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/usb-host.rst
delete mode 100644 arch/arm/boot/dts/s3c2410-pinctrl.h
delete mode 100644 arch/arm/boot/dts/s3c2416-pinctrl.dtsi
delete mode 100644 arch/arm/boot/dts/s3c2416-smdk2416.dts
delete mode 100644 arch/arm/boot/dts/s3c2416.dtsi
delete mode 100644 arch/arm/boot/dts/s3c24xx.dtsi
delete mode 100644 arch/arm/configs/mini2440_defconfig
delete mode 100644 arch/arm/configs/s3c2410_defconfig
delete mode 100644 arch/arm/configs/tct_hammer_defconfig
delete mode 100644 arch/arm/mach-s3c/Kconfig.s3c24xx
delete mode 100644 arch/arm/mach-s3c/Makefile.s3c24xx
delete mode 100644 arch/arm/mach-s3c/adc-core.h
delete mode 100644 arch/arm/mach-s3c/adc.c
delete mode 100644 arch/arm/mach-s3c/anubis.h
delete mode 100644 arch/arm/mach-s3c/ata-core-s3c64xx.h
delete mode 100644 arch/arm/mach-s3c/backlight-s3c64xx.h
delete mode 100644 arch/arm/mach-s3c/bast-ide.c
delete mode 100644 arch/arm/mach-s3c/bast-irq.c
delete mode 100644 arch/arm/mach-s3c/bast.h
delete mode 100644 arch/arm/mach-s3c/common-smdk-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/common-smdk-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/dev-backlight-s3c64xx.c
delete mode 100644 arch/arm/mach-s3c/dma-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/dma-s3c64xx.h
delete mode 100644 arch/arm/mach-s3c/dma.h
delete mode 100644 arch/arm/mach-s3c/fb-core-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/gta02.h
delete mode 100644 arch/arm/mach-s3c/h1940-bluetooth.c
delete mode 100644 arch/arm/mach-s3c/h1940.h
delete mode 100644 arch/arm/mach-s3c/hardware-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/iotiming-s3c2410.c
delete mode 100644 arch/arm/mach-s3c/iotiming-s3c2412.c
delete mode 100644 arch/arm/mach-s3c/irq-pm-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx-fiq.S
delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/irqs-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/mach-amlm5900.c
delete mode 100644 arch/arm/mach-s3c/mach-anubis.c
delete mode 100644 arch/arm/mach-s3c/mach-anw6410.c
delete mode 100644 arch/arm/mach-s3c/mach-at2440evb.c
delete mode 100644 arch/arm/mach-s3c/mach-bast.c
delete mode 100644 arch/arm/mach-s3c/mach-gta02.c
delete mode 100644 arch/arm/mach-s3c/mach-h1940.c
delete mode 100644 arch/arm/mach-s3c/mach-hmt.c
delete mode 100644 arch/arm/mach-s3c/mach-jive.c
delete mode 100644 arch/arm/mach-s3c/mach-mini2440.c
delete mode 100644 arch/arm/mach-s3c/mach-mini6410.c
delete mode 100644 arch/arm/mach-s3c/mach-n30.c
delete mode 100644 arch/arm/mach-s3c/mach-ncp.c
delete mode 100644 arch/arm/mach-s3c/mach-nexcoder.c
delete mode 100644 arch/arm/mach-s3c/mach-osiris-dvs.c
delete mode 100644 arch/arm/mach-s3c/mach-osiris.c
delete mode 100644 arch/arm/mach-s3c/mach-otom.c
delete mode 100644 arch/arm/mach-s3c/mach-qt2410.c
delete mode 100644 arch/arm/mach-s3c/mach-real6410.c
delete mode 100644 arch/arm/mach-s3c/mach-rx1950.c
delete mode 100644 arch/arm/mach-s3c/mach-rx3715.c
delete mode 100644 arch/arm/mach-s3c/mach-s3c2416-dt.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq.h
delete mode 100644 arch/arm/mach-s3c/mach-smartq5.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq7.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk2410.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk2413.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk2416.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk2440.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk2443.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk6400.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk6410.c
delete mode 100644 arch/arm/mach-s3c/mach-tct_hammer.c
delete mode 100644 arch/arm/mach-s3c/mach-vr1000.c
delete mode 100644 arch/arm/mach-s3c/mach-vstms.c
delete mode 100644 arch/arm/mach-s3c/map-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/nand-core-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/onenand-core-s3c64xx.h
delete mode 100644 arch/arm/mach-s3c/osiris.h
delete mode 100644 arch/arm/mach-s3c/otom.h
delete mode 100644 arch/arm/mach-s3c/pll-s3c2410.c
delete mode 100644 arch/arm/mach-s3c/pll-s3c2440-12000000.c
delete mode 100644 arch/arm/mach-s3c/pll-s3c2440-16934400.c
delete mode 100644 arch/arm/mach-s3c/pm-core-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/pm-h1940.S
delete mode 100644 arch/arm/mach-s3c/pm-s3c2410.c
delete mode 100644 arch/arm/mach-s3c/pm-s3c2412.c
delete mode 100644 arch/arm/mach-s3c/pm-s3c2416.c
delete mode 100644 arch/arm/mach-s3c/pm-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/regs-adc.h
delete mode 100644 arch/arm/mach-s3c/regs-clock-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/regs-dsc-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/regs-gpio-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/regs-irq-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/regs-mem-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/regs-s3c2443-clock.h
delete mode 100644 arch/arm/mach-s3c/regs-srom-s3c64xx.h
delete mode 100644 arch/arm/mach-s3c/rtc-core-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/s3c2410.c
delete mode 100644 arch/arm/mach-s3c/s3c2412-power.h
delete mode 100644 arch/arm/mach-s3c/s3c2412.c
delete mode 100644 arch/arm/mach-s3c/s3c2412.h
delete mode 100644 arch/arm/mach-s3c/s3c2416.c
delete mode 100644 arch/arm/mach-s3c/s3c2440.c
delete mode 100644 arch/arm/mach-s3c/s3c2442.c
delete mode 100644 arch/arm/mach-s3c/s3c2443.c
delete mode 100644 arch/arm/mach-s3c/s3c244x.c
delete mode 100644 arch/arm/mach-s3c/s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/s3c6400.c
delete mode 100644 arch/arm/mach-s3c/setup-i2c-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/setup-ide-s3c64xx.c
delete mode 100644 arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/setup-spi-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/setup-ts-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/simtec-audio.c
delete mode 100644 arch/arm/mach-s3c/simtec-nor.c
delete mode 100644 arch/arm/mach-s3c/simtec-pm.c
delete mode 100644 arch/arm/mach-s3c/simtec-usb.c
delete mode 100644 arch/arm/mach-s3c/simtec.h
delete mode 100644 arch/arm/mach-s3c/sleep-s3c2410.S
delete mode 100644 arch/arm/mach-s3c/sleep-s3c2412.S
delete mode 100644 arch/arm/mach-s3c/sleep-s3c24xx.S
delete mode 100644 arch/arm/mach-s3c/spi-core-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/vr1000.h
delete mode 100644 drivers/ata/pata_samsung_cf.c
delete mode 100644 drivers/clk/samsung/clk-s3c2410-dclk.c
delete mode 100644 drivers/clk/samsung/clk-s3c2410.c
delete mode 100644 drivers/clk/samsung/clk-s3c2412.c
delete mode 100644 drivers/clk/samsung/clk-s3c2443.c
delete mode 100644 drivers/cpufreq/s3c2410-cpufreq.c
delete mode 100644 drivers/cpufreq/s3c2412-cpufreq.c
delete mode 100644 drivers/cpufreq/s3c2416-cpufreq.c
delete mode 100644 drivers/cpufreq/s3c2440-cpufreq.c
delete mode 100644 drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
delete mode 100644 drivers/cpufreq/s3c24xx-cpufreq.c
delete mode 100644 drivers/dma/s3c24xx-dma.c
delete mode 100644 drivers/hwmon/s3c-hwmon.c
delete mode 100644 drivers/input/touchscreen/s3c2410_ts.c
delete mode 100644 drivers/leds/leds-s3c24xx.c
delete mode 100644 drivers/mmc/host/s3cmci.c
delete mode 100644 drivers/mmc/host/s3cmci.h
delete mode 100644 drivers/pinctrl/samsung/pinctrl-s3c24xx.c
delete mode 100644 drivers/power/supply/s3c_adc_battery.c
delete mode 100644 drivers/soc/samsung/s3c-pm-debug.c
delete mode 100644 drivers/spi/spi-s3c24xx-regs.h
delete mode 100644 drivers/spi/spi-s3c24xx.c
delete mode 100644 drivers/usb/gadget/udc/s3c-hsudc.c
delete mode 100644 drivers/usb/gadget/udc/s3c2410_udc.c
delete mode 100644 drivers/usb/gadget/udc/s3c2410_udc.h
delete mode 100644 drivers/usb/gadget/udc/s3c2410_udc_regs.h
delete mode 100644 drivers/video/fbdev/s3c2410fb-regs-lcd.h
delete mode 100644 drivers/video/fbdev/s3c2410fb.c
delete mode 100644 drivers/video/fbdev/s3c2410fb.h
delete mode 100644 include/dt-bindings/clock/s3c2410.h
delete mode 100644 include/dt-bindings/clock/s3c2412.h
delete mode 100644 include/dt-bindings/clock/s3c2443.h
delete mode 100644 include/linux/amba/pl093.h
delete mode 100644 include/linux/platform_data/asoc-s3c24xx_simtec.h
delete mode 100644 include/linux/platform_data/ata-samsung_cf.h
delete mode 100644 include/linux/platform_data/clk-s3c2410.h
delete mode 100644 include/linux/platform_data/dma-s3c24xx.h
delete mode 100644 include/linux/platform_data/fb-s3c2410.h
delete mode 100644 include/linux/platform_data/leds-s3c24xx.h
delete mode 100644 include/linux/platform_data/media/s5p_hdmi.h
delete mode 100644 include/linux/platform_data/mmc-s3cmci.h
delete mode 100644 include/linux/platform_data/s3c-hsudc.h
delete mode 100644 include/linux/platform_data/usb-s3c2410_udc.h
delete mode 100644 include/linux/s3c_adc_battery.h
delete mode 100644 include/linux/soc/samsung/s3c-adc.h
delete mode 100644 include/linux/soc/samsung/s3c-cpufreq-core.h
delete mode 100644 include/linux/spi/s3c24xx-fiq.h
delete mode 100644 include/linux/spi/s3c24xx.h
delete mode 100644 include/sound/s3c24xx_uda134x.h
delete mode 100644 sound/soc/samsung/h1940_uda1380.c
delete mode 100644 sound/soc/samsung/jive_wm8750.c
delete mode 100644 sound/soc/samsung/neo1973_wm8753.c
delete mode 100644 sound/soc/samsung/regs-i2s-v2.h
delete mode 100644 sound/soc/samsung/regs-iis.h
delete mode 100644 sound/soc/samsung/rx1950_uda1380.c
delete mode 100644 sound/soc/samsung/s3c-i2s-v2.c
delete mode 100644 sound/soc/samsung/s3c-i2s-v2.h
delete mode 100644 sound/soc/samsung/s3c2412-i2s.c
delete mode 100644 sound/soc/samsung/s3c2412-i2s.h
delete mode 100644 sound/soc/samsung/s3c24xx-i2s.c
delete mode 100644 sound/soc/samsung/s3c24xx-i2s.h
delete mode 100644 sound/soc/samsung/s3c24xx_simtec.c
delete mode 100644 sound/soc/samsung/s3c24xx_simtec.h
delete mode 100644 sound/soc/samsung/s3c24xx_simtec_hermes.c
delete mode 100644 sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
delete mode 100644 sound/soc/samsung/s3c24xx_uda134x.c
delete mode 100644 sound/soc/samsung/smartq_wm8987.c
delete mode 100644 sound/soc/samsung/smdk_wm8580.c
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* [PATCH 01/21] ARM: s3c: remove all s3c24xx support
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-22 20:56 ` Heiko Stübner
` (2 more replies)
2022-10-21 20:27 ` [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks Arnd Bergmann
` (21 subsequent siblings)
22 siblings, 3 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Arnaud Patard, Christer Weinigel, Guillaume GOURAT,
Heiko Stuebner, openmoko-kernel, Jonathan Corbet, Alim Akhtar,
Olof Johansson, soc, Rob Herring, Sylwester Nawrocki,
Tomasz Figa, Chanwoo Choi, Michael Turquette, Stephen Boyd,
linux-doc, linux-samsung-soc, devicetree, linux-stm32, linux-clk
From: Arnd Bergmann <arnd@arndb.de>
The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark
as deprecated and schedule removal") and can be removed. This includes
all files that are exclusively for s3c24xx and not shared with s3c64xx,
as well as the glue logic in Kconfig and the maintainer file entries.
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Christer Weinigel <christer@weinigel.se>
Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: openmoko-kernel@lists.openmoko.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
Documentation/arm/index.rst | 1 -
Documentation/arm/samsung-s3c24xx/cpufreq.rst | 77 -
.../arm/samsung-s3c24xx/eb2410itx.rst | 59 -
Documentation/arm/samsung-s3c24xx/gpio.rst | 172 ---
Documentation/arm/samsung-s3c24xx/h1940.rst | 41 -
Documentation/arm/samsung-s3c24xx/index.rst | 20 -
Documentation/arm/samsung-s3c24xx/nand.rst | 30 -
.../arm/samsung-s3c24xx/overview.rst | 311 ----
Documentation/arm/samsung-s3c24xx/s3c2412.rst | 121 --
Documentation/arm/samsung-s3c24xx/s3c2413.rst | 22 -
.../arm/samsung-s3c24xx/smdk2440.rst | 57 -
Documentation/arm/samsung-s3c24xx/suspend.rst | 137 --
.../arm/samsung-s3c24xx/usb-host.rst | 91 --
Documentation/arm/samsung/overview.rst | 13 -
MAINTAINERS | 16 -
arch/arm/Kconfig | 3 +-
arch/arm/Kconfig.debug | 58 +-
arch/arm/Makefile | 2 -
arch/arm/boot/dts/Makefile | 2 -
arch/arm/boot/dts/s3c2410-pinctrl.h | 19 -
arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 172 ---
arch/arm/boot/dts/s3c2416-smdk2416.dts | 77 -
arch/arm/boot/dts/s3c2416.dtsi | 124 --
arch/arm/boot/dts/s3c24xx.dtsi | 92 --
arch/arm/configs/mini2440_defconfig | 338 -----
arch/arm/configs/s3c2410_defconfig | 437 ------
arch/arm/configs/tct_hammer_defconfig | 58 -
arch/arm/mach-s3c/Kconfig | 27 +-
arch/arm/mach-s3c/Kconfig.s3c24xx | 604 --------
arch/arm/mach-s3c/Makefile | 4 -
arch/arm/mach-s3c/Makefile.s3c24xx | 102 --
arch/arm/mach-s3c/anubis.h | 50 -
arch/arm/mach-s3c/bast-ide.c | 82 -
arch/arm/mach-s3c/bast-irq.c | 137 --
arch/arm/mach-s3c/bast.h | 194 ---
arch/arm/mach-s3c/common-smdk-s3c24xx.c | 228 ---
arch/arm/mach-s3c/common-smdk-s3c24xx.h | 11 -
arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c | 94 --
arch/arm/mach-s3c/dma-s3c24xx.h | 51 -
arch/arm/mach-s3c/fb-core-s3c24xx.h | 24 -
arch/arm/mach-s3c/gpio-samsung-s3c24xx.h | 103 --
arch/arm/mach-s3c/gta02.h | 20 -
arch/arm/mach-s3c/h1940-bluetooth.c | 140 --
arch/arm/mach-s3c/h1940.h | 52 -
arch/arm/mach-s3c/hardware-s3c24xx.h | 14 -
arch/arm/mach-s3c/iotiming-s3c2410.c | 472 ------
arch/arm/mach-s3c/iotiming-s3c2412.c | 278 ----
arch/arm/mach-s3c/irq-pm-s3c24xx.c | 115 --
arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c | 9 -
arch/arm/mach-s3c/irq-s3c24xx-fiq.S | 112 --
arch/arm/mach-s3c/irq-s3c24xx.c | 1352 -----------------
arch/arm/mach-s3c/irqs-s3c24xx.h | 219 ---
arch/arm/mach-s3c/mach-amlm5900.c | 248 ---
arch/arm/mach-s3c/mach-anubis.c | 422 -----
arch/arm/mach-s3c/mach-at2440evb.c | 233 ---
arch/arm/mach-s3c/mach-bast.c | 583 -------
arch/arm/mach-s3c/mach-gta02.c | 588 -------
arch/arm/mach-s3c/mach-h1940.c | 809 ----------
arch/arm/mach-s3c/mach-jive.c | 693 ---------
arch/arm/mach-s3c/mach-mini2440.c | 804 ----------
arch/arm/mach-s3c/mach-n30.c | 682 ---------
arch/arm/mach-s3c/mach-nexcoder.c | 162 --
arch/arm/mach-s3c/mach-osiris-dvs.c | 178 ---
arch/arm/mach-s3c/mach-osiris.c | 405 -----
arch/arm/mach-s3c/mach-otom.c | 124 --
arch/arm/mach-s3c/mach-qt2410.c | 375 -----
arch/arm/mach-s3c/mach-rx1950.c | 884 -----------
arch/arm/mach-s3c/mach-rx3715.c | 213 ---
arch/arm/mach-s3c/mach-s3c2416-dt.c | 48 -
arch/arm/mach-s3c/mach-smdk2410.c | 112 --
arch/arm/mach-s3c/mach-smdk2413.c | 169 ---
arch/arm/mach-s3c/mach-smdk2416.c | 248 ---
arch/arm/mach-s3c/mach-smdk2440.c | 180 ---
arch/arm/mach-s3c/mach-smdk2443.c | 126 --
arch/arm/mach-s3c/mach-tct_hammer.c | 157 --
arch/arm/mach-s3c/mach-vr1000.c | 364 -----
arch/arm/mach-s3c/mach-vstms.c | 166 --
arch/arm/mach-s3c/map-s3c24xx.h | 159 --
arch/arm/mach-s3c/nand-core-s3c24xx.h | 24 -
arch/arm/mach-s3c/osiris.h | 50 -
arch/arm/mach-s3c/pll-s3c2410.c | 83 -
arch/arm/mach-s3c/pll-s3c2440-12000000.c | 95 --
arch/arm/mach-s3c/pll-s3c2440-16934400.c | 122 --
arch/arm/mach-s3c/pm-core-s3c24xx.h | 96 --
arch/arm/mach-s3c/pm-h1940.S | 19 -
arch/arm/mach-s3c/pm-s3c2410.c | 170 ---
arch/arm/mach-s3c/pm-s3c2412.c | 126 --
arch/arm/mach-s3c/pm-s3c2416.c | 81 -
arch/arm/mach-s3c/pm-s3c24xx.c | 121 --
arch/arm/mach-s3c/regs-clock-s3c24xx.h | 146 --
arch/arm/mach-s3c/regs-dsc-s3c24xx.h | 22 -
arch/arm/mach-s3c/regs-gpio-s3c24xx.h | 608 --------
arch/arm/mach-s3c/regs-irq-s3c24xx.h | 51 -
arch/arm/mach-s3c/regs-mem-s3c24xx.h | 53 -
arch/arm/mach-s3c/regs-s3c2443-clock.h | 238 ---
arch/arm/mach-s3c/rtc-core-s3c24xx.h | 23 -
arch/arm/mach-s3c/s3c2410.c | 130 --
arch/arm/mach-s3c/s3c2412-power.h | 34 -
arch/arm/mach-s3c/s3c2412.c | 175 ---
arch/arm/mach-s3c/s3c2412.h | 25 -
arch/arm/mach-s3c/s3c2416.c | 132 --
arch/arm/mach-s3c/s3c2440.c | 71 -
arch/arm/mach-s3c/s3c2442.c | 62 -
arch/arm/mach-s3c/s3c2443.c | 112 --
arch/arm/mach-s3c/s3c244x.c | 128 --
arch/arm/mach-s3c/s3c24xx.c | 687 ---------
arch/arm/mach-s3c/s3c24xx.h | 124 --
arch/arm/mach-s3c/setup-i2c-s3c24xx.c | 23 -
arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c | 31 -
arch/arm/mach-s3c/setup-spi-s3c24xx.c | 27 -
arch/arm/mach-s3c/setup-ts-s3c24xx.c | 29 -
arch/arm/mach-s3c/simtec-audio.c | 76 -
arch/arm/mach-s3c/simtec-nor.c | 74 -
arch/arm/mach-s3c/simtec-pm.c | 60 -
arch/arm/mach-s3c/simtec-usb.c | 125 --
arch/arm/mach-s3c/simtec.h | 17 -
arch/arm/mach-s3c/sleep-s3c2410.S | 54 -
arch/arm/mach-s3c/sleep-s3c2412.S | 53 -
arch/arm/mach-s3c/sleep-s3c24xx.S | 69 -
arch/arm/mach-s3c/spi-core-s3c24xx.h | 21 -
arch/arm/mach-s3c/vr1000.h | 113 --
drivers/soc/samsung/Kconfig | 4 -
include/dt-bindings/clock/s3c2410.h | 59 -
include/dt-bindings/clock/s3c2412.h | 70 -
include/dt-bindings/clock/s3c2443.h | 91 --
include/linux/amba/pl093.h | 77 -
126 files changed, 8 insertions(+), 21049 deletions(-)
delete mode 100644 Documentation/arm/samsung-s3c24xx/cpufreq.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/eb2410itx.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/gpio.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/h1940.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/index.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/nand.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/overview.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/s3c2412.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/s3c2413.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/smdk2440.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/suspend.rst
delete mode 100644 Documentation/arm/samsung-s3c24xx/usb-host.rst
delete mode 100644 arch/arm/boot/dts/s3c2410-pinctrl.h
delete mode 100644 arch/arm/boot/dts/s3c2416-pinctrl.dtsi
delete mode 100644 arch/arm/boot/dts/s3c2416-smdk2416.dts
delete mode 100644 arch/arm/boot/dts/s3c2416.dtsi
delete mode 100644 arch/arm/boot/dts/s3c24xx.dtsi
delete mode 100644 arch/arm/configs/mini2440_defconfig
delete mode 100644 arch/arm/configs/s3c2410_defconfig
delete mode 100644 arch/arm/configs/tct_hammer_defconfig
delete mode 100644 arch/arm/mach-s3c/Kconfig.s3c24xx
delete mode 100644 arch/arm/mach-s3c/Makefile.s3c24xx
delete mode 100644 arch/arm/mach-s3c/anubis.h
delete mode 100644 arch/arm/mach-s3c/bast-ide.c
delete mode 100644 arch/arm/mach-s3c/bast-irq.c
delete mode 100644 arch/arm/mach-s3c/bast.h
delete mode 100644 arch/arm/mach-s3c/common-smdk-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/common-smdk-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/dma-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/fb-core-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/gta02.h
delete mode 100644 arch/arm/mach-s3c/h1940-bluetooth.c
delete mode 100644 arch/arm/mach-s3c/h1940.h
delete mode 100644 arch/arm/mach-s3c/hardware-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/iotiming-s3c2410.c
delete mode 100644 arch/arm/mach-s3c/iotiming-s3c2412.c
delete mode 100644 arch/arm/mach-s3c/irq-pm-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx-fiq.S
delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/irqs-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/mach-amlm5900.c
delete mode 100644 arch/arm/mach-s3c/mach-anubis.c
delete mode 100644 arch/arm/mach-s3c/mach-at2440evb.c
delete mode 100644 arch/arm/mach-s3c/mach-bast.c
delete mode 100644 arch/arm/mach-s3c/mach-gta02.c
delete mode 100644 arch/arm/mach-s3c/mach-h1940.c
delete mode 100644 arch/arm/mach-s3c/mach-jive.c
delete mode 100644 arch/arm/mach-s3c/mach-mini2440.c
delete mode 100644 arch/arm/mach-s3c/mach-n30.c
delete mode 100644 arch/arm/mach-s3c/mach-nexcoder.c
delete mode 100644 arch/arm/mach-s3c/mach-osiris-dvs.c
delete mode 100644 arch/arm/mach-s3c/mach-osiris.c
delete mode 100644 arch/arm/mach-s3c/mach-otom.c
delete mode 100644 arch/arm/mach-s3c/mach-qt2410.c
delete mode 100644 arch/arm/mach-s3c/mach-rx1950.c
delete mode 100644 arch/arm/mach-s3c/mach-rx3715.c
delete mode 100644 arch/arm/mach-s3c/mach-s3c2416-dt.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk2410.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk2413.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk2416.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk2440.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk2443.c
delete mode 100644 arch/arm/mach-s3c/mach-tct_hammer.c
delete mode 100644 arch/arm/mach-s3c/mach-vr1000.c
delete mode 100644 arch/arm/mach-s3c/mach-vstms.c
delete mode 100644 arch/arm/mach-s3c/map-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/nand-core-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/osiris.h
delete mode 100644 arch/arm/mach-s3c/pll-s3c2410.c
delete mode 100644 arch/arm/mach-s3c/pll-s3c2440-12000000.c
delete mode 100644 arch/arm/mach-s3c/pll-s3c2440-16934400.c
delete mode 100644 arch/arm/mach-s3c/pm-core-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/pm-h1940.S
delete mode 100644 arch/arm/mach-s3c/pm-s3c2410.c
delete mode 100644 arch/arm/mach-s3c/pm-s3c2412.c
delete mode 100644 arch/arm/mach-s3c/pm-s3c2416.c
delete mode 100644 arch/arm/mach-s3c/pm-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/regs-clock-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/regs-dsc-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/regs-gpio-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/regs-irq-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/regs-mem-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/regs-s3c2443-clock.h
delete mode 100644 arch/arm/mach-s3c/rtc-core-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/s3c2410.c
delete mode 100644 arch/arm/mach-s3c/s3c2412-power.h
delete mode 100644 arch/arm/mach-s3c/s3c2412.c
delete mode 100644 arch/arm/mach-s3c/s3c2412.h
delete mode 100644 arch/arm/mach-s3c/s3c2416.c
delete mode 100644 arch/arm/mach-s3c/s3c2440.c
delete mode 100644 arch/arm/mach-s3c/s3c2442.c
delete mode 100644 arch/arm/mach-s3c/s3c2443.c
delete mode 100644 arch/arm/mach-s3c/s3c244x.c
delete mode 100644 arch/arm/mach-s3c/s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/setup-i2c-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/setup-spi-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/setup-ts-s3c24xx.c
delete mode 100644 arch/arm/mach-s3c/simtec-audio.c
delete mode 100644 arch/arm/mach-s3c/simtec-nor.c
delete mode 100644 arch/arm/mach-s3c/simtec-pm.c
delete mode 100644 arch/arm/mach-s3c/simtec-usb.c
delete mode 100644 arch/arm/mach-s3c/simtec.h
delete mode 100644 arch/arm/mach-s3c/sleep-s3c2410.S
delete mode 100644 arch/arm/mach-s3c/sleep-s3c2412.S
delete mode 100644 arch/arm/mach-s3c/sleep-s3c24xx.S
delete mode 100644 arch/arm/mach-s3c/spi-core-s3c24xx.h
delete mode 100644 arch/arm/mach-s3c/vr1000.h
delete mode 100644 include/dt-bindings/clock/s3c2410.h
delete mode 100644 include/dt-bindings/clock/s3c2412.h
delete mode 100644 include/dt-bindings/clock/s3c2443.h
delete mode 100644 include/linux/amba/pl093.h
diff --git a/Documentation/arm/index.rst b/Documentation/arm/index.rst
index 8c636d4a061f..ae42fe886f0d 100644
--- a/Documentation/arm/index.rst
+++ b/Documentation/arm/index.rst
@@ -64,7 +64,6 @@ SoC-specific documents
sunxi
samsung/index
- samsung-s3c24xx/index
sunxi/clocks
diff --git a/Documentation/arm/samsung-s3c24xx/cpufreq.rst b/Documentation/arm/samsung-s3c24xx/cpufreq.rst
deleted file mode 100644
index cd22697cf606..000000000000
diff --git a/Documentation/arm/samsung-s3c24xx/eb2410itx.rst b/Documentation/arm/samsung-s3c24xx/eb2410itx.rst
deleted file mode 100644
index 7863c93652f8..000000000000
diff --git a/Documentation/arm/samsung-s3c24xx/gpio.rst b/Documentation/arm/samsung-s3c24xx/gpio.rst
deleted file mode 100644
index f4a8c800a457..000000000000
diff --git a/Documentation/arm/samsung-s3c24xx/h1940.rst b/Documentation/arm/samsung-s3c24xx/h1940.rst
deleted file mode 100644
index 62a562c178e3..000000000000
diff --git a/Documentation/arm/samsung-s3c24xx/index.rst b/Documentation/arm/samsung-s3c24xx/index.rst
deleted file mode 100644
index ccb951a0bedb..000000000000
diff --git a/Documentation/arm/samsung-s3c24xx/nand.rst b/Documentation/arm/samsung-s3c24xx/nand.rst
deleted file mode 100644
index 938995694ee7..000000000000
diff --git a/Documentation/arm/samsung-s3c24xx/overview.rst b/Documentation/arm/samsung-s3c24xx/overview.rst
deleted file mode 100644
index 14535e5cffb7..000000000000
diff --git a/Documentation/arm/samsung-s3c24xx/s3c2412.rst b/Documentation/arm/samsung-s3c24xx/s3c2412.rst
deleted file mode 100644
index 68b985fc6bf4..000000000000
diff --git a/Documentation/arm/samsung-s3c24xx/s3c2413.rst b/Documentation/arm/samsung-s3c24xx/s3c2413.rst
deleted file mode 100644
index 1f51e207fc46..000000000000
diff --git a/Documentation/arm/samsung-s3c24xx/smdk2440.rst b/Documentation/arm/samsung-s3c24xx/smdk2440.rst
deleted file mode 100644
index 524fd0b4afaf..000000000000
diff --git a/Documentation/arm/samsung-s3c24xx/suspend.rst b/Documentation/arm/samsung-s3c24xx/suspend.rst
deleted file mode 100644
index b4f3ae9fe76e..000000000000
diff --git a/Documentation/arm/samsung-s3c24xx/usb-host.rst b/Documentation/arm/samsung-s3c24xx/usb-host.rst
deleted file mode 100644
index 7aaffac89e04..000000000000
diff --git a/Documentation/arm/samsung/overview.rst b/Documentation/arm/samsung/overview.rst
index e74307897416..8b15a190169b 100644
--- a/Documentation/arm/samsung/overview.rst
+++ b/Documentation/arm/samsung/overview.rst
@@ -12,21 +12,10 @@ Introduction
The currently supported SoCs are:
- - S3C24XX: See Documentation/arm/samsung-s3c24xx/overview.rst for full list
- S3C64XX: S3C6400 and S3C6410
- S5PC110 / S5PV210
-S3C24XX Systems
----------------
-
- There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which
- deals with the architecture and drivers specific to these devices.
-
- See Documentation/arm/samsung-s3c24xx/overview.rst for more information
- on the implementation details and specific support.
-
-
Configuration
-------------
@@ -51,8 +40,6 @@ Layout
specific information. It contains the base clock, GPIO and device definitions
to get the system running.
- plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
-
plat-s5p is for s5p specific builds, and contains common support for the
S5P specific systems. Not all S5Ps use all the features in this directory
due to differences in the hardware.
diff --git a/MAINTAINERS b/MAINTAINERS
index ec3d53b5e1d1..071d64e2a7ca 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2462,13 +2462,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm64/boot/dts/freescale/s32g*.dts*
-ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
-L: openmoko-kernel@lists.openmoko.org (subscribers-only)
-S: Orphan
-W: http://wiki.openmoko.org/wiki/Neo_FreeRunner
-F: arch/arm/mach-s3c/gta02.h
-F: arch/arm/mach-s3c/mach-gta02.c
-
ARM/Orion SoC/Technologic Systems TS-78xx platform support
M: Alexander Clouter <alex@digriz.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2649,7 +2642,6 @@ F: include/linux/platform_data/*s3c*
F: include/linux/serial_s3c.h
F: include/linux/soc/samsung/
N: exynos
-N: s3c2410
N: s3c64xx
N: s5pv210
@@ -18673,14 +18665,6 @@ M: Simtec Linux Team <linux@simtec.co.uk>
S: Supported
W: http://www.simtec.co.uk/products/EB110ATX/
-SIMTEC EB2410ITX (BAST)
-M: Simtec Linux Team <linux@simtec.co.uk>
-S: Supported
-W: http://www.simtec.co.uk/products/EB2410ITX/
-F: arch/arm/mach-s3c/bast-ide.c
-F: arch/arm/mach-s3c/bast-irq.c
-F: arch/arm/mach-s3c/mach-bast.c
-
SIOX
M: Thorsten Scherer <t.scherer@eckelmann.de>
M: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c1614f91e04c..280701af4a01 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -279,7 +279,6 @@ config PHYS_OFFSET
default DRAM_BASE if !MMU
default 0x00000000 if ARCH_FOOTBRIDGE
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
- default 0x30000000 if ARCH_S3C24XX
default 0xa0000000 if ARCH_PXA
default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100
default 0
@@ -1154,7 +1153,7 @@ config ARCH_NR_GPIO
default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \
ARCH_ZYNQ || ARCH_ASPEED
default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
- SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
+ SOC_DRA7XX || ARCH_S3C64XX || ARCH_S5PV210
default 416 if ARCH_SUNXI
default 392 if ARCH_U8500
default 352 if ARCH_VT8500
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 20312792340d..874551895181 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1006,7 +1006,6 @@ choice
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
- select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 0 for low-level debug"
@@ -1018,7 +1017,6 @@ choice
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
- select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 1 for low-level debug"
@@ -1030,7 +1028,6 @@ choice
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
- select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 2 for low-level debug"
@@ -1050,33 +1047,6 @@ choice
their output to UART 3. The port must have been initialised
by the boot-loader before use.
- config DEBUG_S3C2410_UART0
- depends on ARCH_S3C24XX
- select DEBUG_S3C2410_UART
- bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
- help
- Say Y here if you want the debug print routines to direct
- their output to UART 0. The port must have been initialised
- by the boot-loader before use.
-
- config DEBUG_S3C2410_UART1
- depends on ARCH_S3C24XX
- select DEBUG_S3C2410_UART
- bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
- help
- Say Y here if you want the debug print routines to direct
- their output to UART 1. The port must have been initialised
- by the boot-loader before use.
-
- config DEBUG_S3C2410_UART2
- depends on ARCH_S3C24XX
- select DEBUG_S3C2410_UART
- bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
- help
- Say Y here if you want the debug print routines to direct
- their output to UART 2. The port must have been initialised
- by the boot-loader before use.
-
config DEBUG_SA1100
depends on ARCH_SA1100
bool "Use SA1100 UARTs for low-level debug"
@@ -1439,13 +1409,6 @@ config DEBUG_AT91_UART
config DEBUG_EXYNOS_UART
bool
-config DEBUG_S3C2410_UART
- bool
- select DEBUG_S3C24XX_UART
-
-config DEBUG_S3C24XX_UART
- bool
-
config DEBUG_S3C64XX_UART
bool
@@ -1453,8 +1416,7 @@ config DEBUG_S5PV210_UART
bool
config DEBUG_S3C_UART
- depends on DEBUG_S3C2410_UART || DEBUG_S3C24XX_UART || \
- DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \
+ depends on DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \
DEBUG_EXYNOS_UART
int
default "0" if DEBUG_S3C_UART0
@@ -1555,7 +1517,7 @@ config DEBUG_LL_INCLUDE
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
- default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
+ default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART
default "debug/s5pv210.S" if DEBUG_S5PV210_UART
default "debug/sti.S" if DEBUG_STIH41X_ASC2
default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
@@ -1638,12 +1600,6 @@ config DEBUG_UART_PHYS
default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
default 0x49020000 if DEBUG_OMAP3UART3
default 0x49042000 if DEBUG_OMAP3UART4
- default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
- DEBUG_S3C2410_UART0)
- default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
- DEBUG_S3C2410_UART1)
- default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
- DEBUG_S3C2410_UART2)
default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
@@ -1711,7 +1667,7 @@ config DEBUG_UART_PHYS
DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \
DEBUG_RCAR_GEN2_SCIFA2 || \
DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
- DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
+ DEBUG_RMOBILE_SCIFA4 || \
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_DIGICOLOR_UA0 || \
@@ -1748,15 +1704,9 @@ config DEBUG_UART_VIRT
default 0xf6200000 if DEBUG_PXA_UART1
default 0xf7000000 if DEBUG_SUN9I_UART0
default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
- default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
- DEBUG_S3C2410_UART0)
default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
- default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
- DEBUG_S3C2410_UART1)
- default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
- DEBUG_S3C2410_UART2)
default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8007000 if DEBUG_HIP04_UART
@@ -1820,7 +1770,7 @@ config DEBUG_UART_VIRT
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
- DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
+ DEBUG_QCOM_UARTDM || \
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_DIGICOLOR_UA0 || \
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 1a62035d1207..129162244c68 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -143,8 +143,6 @@ CHECKFLAGS += -D__arm__
# during boot, and this offset is critical to the functioning of
# kexec-tools.
textofs-y := 0x00008000
-# We don't want the htc bootloader to corrupt kernel during resume
-textofs-$(CONFIG_PM_H1940) := 0x00108000
# RTD1195 has Boot ROM at start of address space
textofs-$(CONFIG_ARCH_REALTEK) := 0x00108000
# SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6aa7dc4db2fc..f0699ec7da2f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1156,8 +1156,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-veyron-speedy.dtb \
rk3288-veyron-tiger.dtb \
rk3288-vyasa.dtb
-dtb-$(CONFIG_ARCH_S3C24XX) += \
- s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += \
s3c6410-mini6410.dtb \
s3c6410-smdk6410.dtb
diff --git a/arch/arm/boot/dts/s3c2410-pinctrl.h b/arch/arm/boot/dts/s3c2410-pinctrl.h
deleted file mode 100644
index 76b6171ae149..000000000000
diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
deleted file mode 100644
index 3268366bd8bc..000000000000
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
deleted file mode 100644
index e7c379a9842e..000000000000
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
deleted file mode 100644
index 4660751cb207..000000000000
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
deleted file mode 100644
index 06f82c7e458e..000000000000
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
deleted file mode 100644
index 86e00f684e16..000000000000
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
deleted file mode 100644
index 41b40863a78e..000000000000
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
deleted file mode 100644
index 3b29ae1fb750..000000000000
diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig
index a64143574546..809f84fca0b8 100644
--- a/arch/arm/mach-s3c/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig
@@ -2,13 +2,10 @@
#
# Copyright 2009 Simtec Electronics
-source "arch/arm/mach-s3c/Kconfig.s3c24xx"
source "arch/arm/mach-s3c/Kconfig.s3c64xx"
config PLAT_SAMSUNG
- bool
- depends on PLAT_S3C24XX || ARCH_S3C64XX
- default y
+ def_bool ARCH_S3C64XX
select GENERIC_IRQ_CHIP
select NO_IOPORT_MAP
select SOC_SAMSUNG
@@ -16,9 +13,8 @@ config PLAT_SAMSUNG
Base platform code for all Samsung SoC based systems
config SAMSUNG_PM
- bool
- depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX)
- default y
+ def_bool ARCH_S3C64XX
+ depends on PM
help
Base platform power management code for samsung code
@@ -99,11 +95,6 @@ config S3C_DEV_HSMMC3
help
Compile in platform device definitions for HSMMC channel 3
-config S3C_DEV_HWMON
- bool
- help
- Compile in platform device definitions for HWMON
-
config S3C_DEV_I2C1
bool
help
@@ -156,7 +147,6 @@ config S3C_DEV_USB_HSOTG
config S3C_DEV_WDT
bool
- default y if ARCH_S3C24XX
help
Compile in platform device definition for Watchdog Timer
@@ -180,22 +170,12 @@ config SAMSUNG_DEV_ADC
help
Compile in platform device definition for ADC controller
-config SAMSUNG_DEV_IDE
- bool
- help
- Compile in platform device definitions for IDE
-
config S3C64XX_DEV_SPI0
bool
help
Compile in platform device definitions for S3C64XX's type
SPI controller 0
-config SAMSUNG_DEV_TS
- bool
- help
- Common in platform device definitions for touchscreen device
-
config SAMSUNG_DEV_KEYPAD
bool
help
@@ -203,7 +183,6 @@ config SAMSUNG_DEV_KEYPAD
config SAMSUNG_DEV_PWM
bool
- default y if ARCH_S3C24XX
help
Compile in platform device definition for PWM Timer
diff --git a/arch/arm/mach-s3c/Kconfig.s3c24xx b/arch/arm/mach-s3c/Kconfig.s3c24xx
deleted file mode 100644
index 7287e173f30e..000000000000
diff --git a/arch/arm/mach-s3c/Makefile b/arch/arm/mach-s3c/Makefile
index 7c7d3318fd61..e7f18039b149 100644
--- a/arch/arm/mach-s3c/Makefile
+++ b/arch/arm/mach-s3c/Makefile
@@ -2,10 +2,6 @@
#
# Copyright 2009 Simtec Electronics
-ifdef CONFIG_ARCH_S3C24XX
-include $(src)/Makefile.s3c24xx
-endif
-
ifdef CONFIG_ARCH_S3C64XX
include $(src)/Makefile.s3c64xx
endif
diff --git a/arch/arm/mach-s3c/Makefile.s3c24xx b/arch/arm/mach-s3c/Makefile.s3c24xx
deleted file mode 100644
index 3483ab3a2b81..000000000000
diff --git a/arch/arm/mach-s3c/anubis.h b/arch/arm/mach-s3c/anubis.h
deleted file mode 100644
index 13847292e6c7..000000000000
diff --git a/arch/arm/mach-s3c/bast-ide.c b/arch/arm/mach-s3c/bast-ide.c
deleted file mode 100644
index 67f0adc1fec0..000000000000
diff --git a/arch/arm/mach-s3c/bast-irq.c b/arch/arm/mach-s3c/bast-irq.c
deleted file mode 100644
index cfc2ddc65513..000000000000
diff --git a/arch/arm/mach-s3c/bast.h b/arch/arm/mach-s3c/bast.h
deleted file mode 100644
index a7726f93f5eb..000000000000
diff --git a/arch/arm/mach-s3c/common-smdk-s3c24xx.c b/arch/arm/mach-s3c/common-smdk-s3c24xx.c
deleted file mode 100644
index 6d124bbd384c..000000000000
diff --git a/arch/arm/mach-s3c/common-smdk-s3c24xx.h b/arch/arm/mach-s3c/common-smdk-s3c24xx.h
deleted file mode 100644
index c0352b06e435..000000000000
diff --git a/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c b/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
deleted file mode 100644
index c1784d8facdf..000000000000
diff --git a/arch/arm/mach-s3c/dma-s3c24xx.h b/arch/arm/mach-s3c/dma-s3c24xx.h
deleted file mode 100644
index 25fc9c258fc1..000000000000
diff --git a/arch/arm/mach-s3c/fb-core-s3c24xx.h b/arch/arm/mach-s3c/fb-core-s3c24xx.h
deleted file mode 100644
index 0e07f3ba4aef..000000000000
diff --git a/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h b/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
deleted file mode 100644
index c29fdc95f883..000000000000
diff --git a/arch/arm/mach-s3c/gta02.h b/arch/arm/mach-s3c/gta02.h
deleted file mode 100644
index 043ae382bfc5..000000000000
diff --git a/arch/arm/mach-s3c/h1940-bluetooth.c b/arch/arm/mach-s3c/h1940-bluetooth.c
deleted file mode 100644
index 59edcf8a620d..000000000000
diff --git a/arch/arm/mach-s3c/h1940.h b/arch/arm/mach-s3c/h1940.h
deleted file mode 100644
index 5dfe9d10cd15..000000000000
diff --git a/arch/arm/mach-s3c/hardware-s3c24xx.h b/arch/arm/mach-s3c/hardware-s3c24xx.h
deleted file mode 100644
index 33b37467d05f..000000000000
diff --git a/arch/arm/mach-s3c/iotiming-s3c2410.c b/arch/arm/mach-s3c/iotiming-s3c2410.c
deleted file mode 100644
index 09f388d8f824..000000000000
diff --git a/arch/arm/mach-s3c/iotiming-s3c2412.c b/arch/arm/mach-s3c/iotiming-s3c2412.c
deleted file mode 100644
index 003f89c4dc53..000000000000
diff --git a/arch/arm/mach-s3c/irq-pm-s3c24xx.c b/arch/arm/mach-s3c/irq-pm-s3c24xx.c
deleted file mode 100644
index 55f41135ad70..000000000000
diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c b/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
deleted file mode 100644
index 84cf86376ded..000000000000
diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq.S b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
deleted file mode 100644
index 5d238d9a798e..000000000000
diff --git a/arch/arm/mach-s3c/irq-s3c24xx.c b/arch/arm/mach-s3c/irq-s3c24xx.c
deleted file mode 100644
index 088cc04b7431..000000000000
diff --git a/arch/arm/mach-s3c/irqs-s3c24xx.h b/arch/arm/mach-s3c/irqs-s3c24xx.h
deleted file mode 100644
index fecbf7e440c6..000000000000
diff --git a/arch/arm/mach-s3c/mach-amlm5900.c b/arch/arm/mach-s3c/mach-amlm5900.c
deleted file mode 100644
index f85e5885e9b4..000000000000
diff --git a/arch/arm/mach-s3c/mach-anubis.c b/arch/arm/mach-s3c/mach-anubis.c
deleted file mode 100644
index 4536f3e66e27..000000000000
diff --git a/arch/arm/mach-s3c/mach-at2440evb.c b/arch/arm/mach-s3c/mach-at2440evb.c
deleted file mode 100644
index 743403d873e0..000000000000
diff --git a/arch/arm/mach-s3c/mach-bast.c b/arch/arm/mach-s3c/mach-bast.c
deleted file mode 100644
index a33ceab81e09..000000000000
diff --git a/arch/arm/mach-s3c/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c
deleted file mode 100644
index d50a81d85ae1..000000000000
diff --git a/arch/arm/mach-s3c/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c
deleted file mode 100644
index 83ac6cfdb1d8..000000000000
diff --git a/arch/arm/mach-s3c/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c
deleted file mode 100644
index 16859bb3bb13..000000000000
diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c
deleted file mode 100644
index 283be70ca622..000000000000
diff --git a/arch/arm/mach-s3c/mach-n30.c b/arch/arm/mach-s3c/mach-n30.c
deleted file mode 100644
index 90122fc6b2aa..000000000000
diff --git a/arch/arm/mach-s3c/mach-nexcoder.c b/arch/arm/mach-s3c/mach-nexcoder.c
deleted file mode 100644
index d17a3fcb7425..000000000000
diff --git a/arch/arm/mach-s3c/mach-osiris-dvs.c b/arch/arm/mach-s3c/mach-osiris-dvs.c
deleted file mode 100644
index 2e283aedab65..000000000000
diff --git a/arch/arm/mach-s3c/mach-osiris.c b/arch/arm/mach-s3c/mach-osiris.c
deleted file mode 100644
index d900d1354de1..000000000000
diff --git a/arch/arm/mach-s3c/mach-otom.c b/arch/arm/mach-s3c/mach-otom.c
deleted file mode 100644
index 3a2db2f58833..000000000000
diff --git a/arch/arm/mach-s3c/mach-qt2410.c b/arch/arm/mach-s3c/mach-qt2410.c
deleted file mode 100644
index 36fe0684a438..000000000000
diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c
deleted file mode 100644
index d8c49e562660..000000000000
diff --git a/arch/arm/mach-s3c/mach-rx3715.c b/arch/arm/mach-s3c/mach-rx3715.c
deleted file mode 100644
index 52b3c38acbb2..000000000000
diff --git a/arch/arm/mach-s3c/mach-s3c2416-dt.c b/arch/arm/mach-s3c/mach-s3c2416-dt.c
deleted file mode 100644
index 418544d3015d..000000000000
diff --git a/arch/arm/mach-s3c/mach-smdk2410.c b/arch/arm/mach-s3c/mach-smdk2410.c
deleted file mode 100644
index 76b0a8846616..000000000000
diff --git a/arch/arm/mach-s3c/mach-smdk2413.c b/arch/arm/mach-s3c/mach-smdk2413.c
deleted file mode 100644
index 2b4e20aaa346..000000000000
diff --git a/arch/arm/mach-s3c/mach-smdk2416.c b/arch/arm/mach-s3c/mach-smdk2416.c
deleted file mode 100644
index 329fe26be268..000000000000
diff --git a/arch/arm/mach-s3c/mach-smdk2440.c b/arch/arm/mach-s3c/mach-smdk2440.c
deleted file mode 100644
index 6aea769ebde1..000000000000
diff --git a/arch/arm/mach-s3c/mach-smdk2443.c b/arch/arm/mach-s3c/mach-smdk2443.c
deleted file mode 100644
index 075140f8f760..000000000000
diff --git a/arch/arm/mach-s3c/mach-tct_hammer.c b/arch/arm/mach-s3c/mach-tct_hammer.c
deleted file mode 100644
index 93ab1abd8bd3..000000000000
diff --git a/arch/arm/mach-s3c/mach-vr1000.c b/arch/arm/mach-s3c/mach-vr1000.c
deleted file mode 100644
index c85033e6ef8f..000000000000
diff --git a/arch/arm/mach-s3c/mach-vstms.c b/arch/arm/mach-s3c/mach-vstms.c
deleted file mode 100644
index 6f878418be3e..000000000000
diff --git a/arch/arm/mach-s3c/map-s3c24xx.h b/arch/arm/mach-s3c/map-s3c24xx.h
deleted file mode 100644
index f8d075b11d6f..000000000000
diff --git a/arch/arm/mach-s3c/nand-core-s3c24xx.h b/arch/arm/mach-s3c/nand-core-s3c24xx.h
deleted file mode 100644
index a14316729c48..000000000000
diff --git a/arch/arm/mach-s3c/osiris.h b/arch/arm/mach-s3c/osiris.h
deleted file mode 100644
index b6c9c5ed2ba7..000000000000
diff --git a/arch/arm/mach-s3c/pll-s3c2410.c b/arch/arm/mach-s3c/pll-s3c2410.c
deleted file mode 100644
index 3fbc99eaa4a2..000000000000
diff --git a/arch/arm/mach-s3c/pll-s3c2440-12000000.c b/arch/arm/mach-s3c/pll-s3c2440-12000000.c
deleted file mode 100644
index fdb8e8c2fe3b..000000000000
diff --git a/arch/arm/mach-s3c/pll-s3c2440-16934400.c b/arch/arm/mach-s3c/pll-s3c2440-16934400.c
deleted file mode 100644
index 438b6fc099a4..000000000000
diff --git a/arch/arm/mach-s3c/pm-core-s3c24xx.h b/arch/arm/mach-s3c/pm-core-s3c24xx.h
deleted file mode 100644
index a71ed5711019..000000000000
diff --git a/arch/arm/mach-s3c/pm-h1940.S b/arch/arm/mach-s3c/pm-h1940.S
deleted file mode 100644
index 3bf6685123cb..000000000000
diff --git a/arch/arm/mach-s3c/pm-s3c2410.c b/arch/arm/mach-s3c/pm-s3c2410.c
deleted file mode 100644
index a66419883735..000000000000
diff --git a/arch/arm/mach-s3c/pm-s3c2412.c b/arch/arm/mach-s3c/pm-s3c2412.c
deleted file mode 100644
index ed3b4cfc7c0f..000000000000
diff --git a/arch/arm/mach-s3c/pm-s3c2416.c b/arch/arm/mach-s3c/pm-s3c2416.c
deleted file mode 100644
index f69ad84cf4ff..000000000000
diff --git a/arch/arm/mach-s3c/pm-s3c24xx.c b/arch/arm/mach-s3c/pm-s3c24xx.c
deleted file mode 100644
index 3a8f5c38882e..000000000000
diff --git a/arch/arm/mach-s3c/regs-clock-s3c24xx.h b/arch/arm/mach-s3c/regs-clock-s3c24xx.h
deleted file mode 100644
index 933ddb5eedec..000000000000
diff --git a/arch/arm/mach-s3c/regs-dsc-s3c24xx.h b/arch/arm/mach-s3c/regs-dsc-s3c24xx.h
deleted file mode 100644
index 8b8b572aef04..000000000000
diff --git a/arch/arm/mach-s3c/regs-gpio-s3c24xx.h b/arch/arm/mach-s3c/regs-gpio-s3c24xx.h
deleted file mode 100644
index 9a7e262268a7..000000000000
diff --git a/arch/arm/mach-s3c/regs-irq-s3c24xx.h b/arch/arm/mach-s3c/regs-irq-s3c24xx.h
deleted file mode 100644
index c0b97b203415..000000000000
diff --git a/arch/arm/mach-s3c/regs-mem-s3c24xx.h b/arch/arm/mach-s3c/regs-mem-s3c24xx.h
deleted file mode 100644
index 8fed34a1672a..000000000000
diff --git a/arch/arm/mach-s3c/regs-s3c2443-clock.h b/arch/arm/mach-s3c/regs-s3c2443-clock.h
deleted file mode 100644
index b3b670d463db..000000000000
diff --git a/arch/arm/mach-s3c/rtc-core-s3c24xx.h b/arch/arm/mach-s3c/rtc-core-s3c24xx.h
deleted file mode 100644
index e7258b2423fc..000000000000
diff --git a/arch/arm/mach-s3c/s3c2410.c b/arch/arm/mach-s3c/s3c2410.c
deleted file mode 100644
index 4d39d9939c2f..000000000000
diff --git a/arch/arm/mach-s3c/s3c2412-power.h b/arch/arm/mach-s3c/s3c2412-power.h
deleted file mode 100644
index 0031cfaa1d76..000000000000
diff --git a/arch/arm/mach-s3c/s3c2412.c b/arch/arm/mach-s3c/s3c2412.c
deleted file mode 100644
index 0b1ca78c9d2a..000000000000
diff --git a/arch/arm/mach-s3c/s3c2412.h b/arch/arm/mach-s3c/s3c2412.h
deleted file mode 100644
index ed09a0e13bd8..000000000000
diff --git a/arch/arm/mach-s3c/s3c2416.c b/arch/arm/mach-s3c/s3c2416.c
deleted file mode 100644
index 126e6ed29713..000000000000
diff --git a/arch/arm/mach-s3c/s3c2440.c b/arch/arm/mach-s3c/s3c2440.c
deleted file mode 100644
index c6cdee4987e8..000000000000
diff --git a/arch/arm/mach-s3c/s3c2442.c b/arch/arm/mach-s3c/s3c2442.c
deleted file mode 100644
index 0c0e30b6688f..000000000000
diff --git a/arch/arm/mach-s3c/s3c2443.c b/arch/arm/mach-s3c/s3c2443.c
deleted file mode 100644
index 05c3c298b9f8..000000000000
diff --git a/arch/arm/mach-s3c/s3c244x.c b/arch/arm/mach-s3c/s3c244x.c
deleted file mode 100644
index 95df3491e650..000000000000
diff --git a/arch/arm/mach-s3c/s3c24xx.c b/arch/arm/mach-s3c/s3c24xx.c
deleted file mode 100644
index 819a95364af9..000000000000
diff --git a/arch/arm/mach-s3c/s3c24xx.h b/arch/arm/mach-s3c/s3c24xx.h
deleted file mode 100644
index 34dd4ac507e9..000000000000
diff --git a/arch/arm/mach-s3c/setup-i2c-s3c24xx.c b/arch/arm/mach-s3c/setup-i2c-s3c24xx.c
deleted file mode 100644
index 0d88366b234c..000000000000
diff --git a/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
deleted file mode 100644
index 02131b3a731d..000000000000
diff --git a/arch/arm/mach-s3c/setup-spi-s3c24xx.c b/arch/arm/mach-s3c/setup-spi-s3c24xx.c
deleted file mode 100644
index 93fa1bbc9d5c..000000000000
diff --git a/arch/arm/mach-s3c/setup-ts-s3c24xx.c b/arch/arm/mach-s3c/setup-ts-s3c24xx.c
deleted file mode 100644
index 57363eaeb7e8..000000000000
diff --git a/arch/arm/mach-s3c/simtec-audio.c b/arch/arm/mach-s3c/simtec-audio.c
deleted file mode 100644
index 487485bcc2ab..000000000000
diff --git a/arch/arm/mach-s3c/simtec-nor.c b/arch/arm/mach-s3c/simtec-nor.c
deleted file mode 100644
index a6fba056a747..000000000000
diff --git a/arch/arm/mach-s3c/simtec-pm.c b/arch/arm/mach-s3c/simtec-pm.c
deleted file mode 100644
index 490256a766e2..000000000000
diff --git a/arch/arm/mach-s3c/simtec-usb.c b/arch/arm/mach-s3c/simtec-usb.c
deleted file mode 100644
index 76cedb5c7373..000000000000
diff --git a/arch/arm/mach-s3c/simtec.h b/arch/arm/mach-s3c/simtec.h
deleted file mode 100644
index d96bd60872b8..000000000000
diff --git a/arch/arm/mach-s3c/sleep-s3c2410.S b/arch/arm/mach-s3c/sleep-s3c2410.S
deleted file mode 100644
index 04aded98782b..000000000000
diff --git a/arch/arm/mach-s3c/sleep-s3c2412.S b/arch/arm/mach-s3c/sleep-s3c2412.S
deleted file mode 100644
index b4b61737fbb2..000000000000
diff --git a/arch/arm/mach-s3c/sleep-s3c24xx.S b/arch/arm/mach-s3c/sleep-s3c24xx.S
deleted file mode 100644
index 4b2af91f3dce..000000000000
diff --git a/arch/arm/mach-s3c/spi-core-s3c24xx.h b/arch/arm/mach-s3c/spi-core-s3c24xx.h
deleted file mode 100644
index 919c5fd0c9af..000000000000
diff --git a/arch/arm/mach-s3c/vr1000.h b/arch/arm/mach-s3c/vr1000.h
deleted file mode 100644
index 3cfa296bec2a..000000000000
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index 02e319508cc6..b4f538d7412f 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -85,8 +85,6 @@ config SAMSUNG_PM_CHECK
Note, this can take several seconds depending on memory size
and CPU speed.
- See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
-
config SAMSUNG_PM_CHECK_CHUNKSIZE
int "S3C2410 PM Suspend CRC Chunksize (KiB)"
depends on PM && SAMSUNG_PM_CHECK
@@ -97,8 +95,6 @@ config SAMSUNG_PM_CHECK_CHUNKSIZE
the CRC data block will take more memory, but will identify any
faults with better precision.
- See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
-
config EXYNOS_REGULATOR_COUPLER
bool "Exynos SoC Regulator Coupler" if COMPILE_TEST
depends on ARCH_EXYNOS || COMPILE_TEST
diff --git a/include/dt-bindings/clock/s3c2410.h b/include/dt-bindings/clock/s3c2410.h
deleted file mode 100644
index 0fb65c3f2f59..000000000000
diff --git a/include/dt-bindings/clock/s3c2412.h b/include/dt-bindings/clock/s3c2412.h
deleted file mode 100644
index b4656156cc0f..000000000000
diff --git a/include/dt-bindings/clock/s3c2443.h b/include/dt-bindings/clock/s3c2443.h
deleted file mode 100644
index a9d2f105d536..000000000000
diff --git a/include/linux/amba/pl093.h b/include/linux/amba/pl093.h
deleted file mode 100644
index b17166e3b49a..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
2022-10-21 20:27 ` [PATCH 01/21] ARM: s3c: remove all s3c24xx support Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-21 22:33 ` Wolfram Sang
` (8 more replies)
2022-10-21 20:27 ` [PATCH 03/21] ARM: s3c: remove most s3c64xx board support Arnd Bergmann
` (20 subsequent siblings)
22 siblings, 9 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Daniel Lezcano, Thomas Gleixner, Jonathan Cameron,
Lars-Peter Clausen, Sylwester Nawrocki, Mauro Carvalho Chehab,
Ulf Hansson, Miquel Raynal, Richard Weinberger,
Vignesh Raghavendra, Tomasz Figa, Linus Walleij,
Alessandro Zummo, Alexandre Belloni, Greg Kroah-Hartman,
Jiri Slaby, Guenter Roeck, Chanwoo Choi, Stephen Boyd,
linux-samsung-soc, linux-i2c, linux-iio, linux-media, linux-mmc,
linux-mtd, linux-gpio, linux-rtc, linux-serial, linux-usb,
linux-watchdog, linux-clk
From: Arnd Bergmann <arnd@arndb.de>
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
similar symbols that are no longer available with the platform gone,
though the drivers themselves are still used on newer platforms,
so remove these hacks.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/include/debug/s3c24xx.S | 10 -
arch/arm/mach-s3c/Makefile | 2 -
arch/arm/mach-s3c/devs.c | 1 -
arch/arm/mach-s3c/dma.h | 7 -
arch/arm/mach-s3c/gpio-samsung.h | 7 -
arch/arm/mach-s3c/irqs.h | 7 -
arch/arm/mach-s3c/map.h | 7 -
arch/arm/mach-s3c/pm-core.h | 7 -
arch/arm/mach-s3c/regs-clock.h | 7 -
arch/arm/mach-s3c/regs-gpio.h | 7 -
arch/arm/mach-s3c/regs-irq.h | 7 -
drivers/clocksource/Kconfig | 2 +-
drivers/i2c/busses/Kconfig | 3 +-
drivers/i2c/busses/i2c-s3c2410.c | 72 -------
drivers/iio/adc/Kconfig | 6 +-
.../media/platform/samsung/s3c-camif/Kconfig | 8 +-
drivers/mmc/host/Kconfig | 5 +-
drivers/mtd/nand/raw/Kconfig | 2 +-
drivers/mtd/nand/raw/s3c2410.c | 60 ------
drivers/pinctrl/samsung/pinctrl-samsung.c | 10 -
drivers/rtc/Kconfig | 8 +-
drivers/tty/serial/Kconfig | 8 +-
drivers/tty/serial/samsung_tty.c | 199 ------------------
drivers/usb/host/Kconfig | 8 +-
drivers/watchdog/Kconfig | 9 +-
drivers/watchdog/s3c2410_wdt.c | 84 +-------
include/linux/clk/samsung.h | 32 ---
include/linux/soc/samsung/s3c-pm.h | 58 -----
28 files changed, 29 insertions(+), 614 deletions(-)
diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S
index af873b526677..7ab5e577cd42 100644
--- a/arch/arm/include/debug/s3c24xx.S
+++ b/arch/arm/include/debug/s3c24xx.S
@@ -28,16 +28,6 @@
and \rd, \rd, #S3C2410_UFSTAT_TXMASK
.endm
-/* Select the correct implementation depending on the configuration. The
- * S3C2440 will get selected by default, as these are the most widely
- * used variants of these
-*/
-
-#if defined(CONFIG_DEBUG_S3C2410_UART)
-#define fifo_full fifo_full_s3c2410
-#define fifo_level fifo_level_s3c2410
-#endif
-
/* include the reset of the code which will do the work */
#include <debug/samsung.S>
diff --git a/arch/arm/mach-s3c/Makefile b/arch/arm/mach-s3c/Makefile
index e7f18039b149..a5135137e648 100644
--- a/arch/arm/mach-s3c/Makefile
+++ b/arch/arm/mach-s3c/Makefile
@@ -2,9 +2,7 @@
#
# Copyright 2009 Simtec Electronics
-ifdef CONFIG_ARCH_S3C64XX
include $(src)/Makefile.s3c64xx
-endif
# Objects we always build independent of SoC choice
diff --git a/arch/arm/mach-s3c/devs.c b/arch/arm/mach-s3c/devs.c
index 9ac07c023adf..a31d1c3038e8 100644
--- a/arch/arm/mach-s3c/devs.c
+++ b/arch/arm/mach-s3c/devs.c
@@ -29,7 +29,6 @@
#include <linux/sizes.h>
#include <linux/platform_data/s3c-hsudc.h>
#include <linux/platform_data/s3c-hsotg.h>
-#include <linux/platform_data/dma-s3c24xx.h>
#include <linux/platform_data/media/s5p_hdmi.h>
diff --git a/arch/arm/mach-s3c/dma.h b/arch/arm/mach-s3c/dma.h
index 59a4578c5f00..48057cb90070 100644
--- a/arch/arm/mach-s3c/dma.h
+++ b/arch/arm/mach-s3c/dma.h
@@ -1,9 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "dma-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
#include "dma-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/gpio-samsung.h b/arch/arm/mach-s3c/gpio-samsung.h
index 02f6f4a96862..4233515eddaa 100644
--- a/arch/arm/mach-s3c/gpio-samsung.h
+++ b/arch/arm/mach-s3c/gpio-samsung.h
@@ -1,9 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "gpio-samsung-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
#include "gpio-samsung-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/irqs.h b/arch/arm/mach-s3c/irqs.h
index 0bff1c1c8eb0..3ff0e0963080 100644
--- a/arch/arm/mach-s3c/irqs.h
+++ b/arch/arm/mach-s3c/irqs.h
@@ -1,9 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "irqs-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
#include "irqs-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/map.h b/arch/arm/mach-s3c/map.h
index 7cfb517d4886..778d6f81cb2b 100644
--- a/arch/arm/mach-s3c/map.h
+++ b/arch/arm/mach-s3c/map.h
@@ -1,9 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "map-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
#include "map-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/pm-core.h b/arch/arm/mach-s3c/pm-core.h
index b0e1d277f599..3e0c2df79120 100644
--- a/arch/arm/mach-s3c/pm-core.h
+++ b/arch/arm/mach-s3c/pm-core.h
@@ -1,9 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "pm-core-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
#include "pm-core-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/regs-clock.h b/arch/arm/mach-s3c/regs-clock.h
index 7df31f203d28..fc7e3886b07c 100644
--- a/arch/arm/mach-s3c/regs-clock.h
+++ b/arch/arm/mach-s3c/regs-clock.h
@@ -1,9 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "regs-clock-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
#include "regs-clock-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/regs-gpio.h b/arch/arm/mach-s3c/regs-gpio.h
index 0d41cb76d440..4e08e8609663 100644
--- a/arch/arm/mach-s3c/regs-gpio.h
+++ b/arch/arm/mach-s3c/regs-gpio.h
@@ -1,9 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "regs-gpio-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
#include "regs-gpio-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/regs-irq.h b/arch/arm/mach-s3c/regs-irq.h
index 57f0dda8dbf5..4243daa54bd1 100644
--- a/arch/arm/mach-s3c/regs-irq.h
+++ b/arch/arm/mach-s3c/regs-irq.h
@@ -1,9 +1,2 @@
/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "regs-irq-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
#include "regs-irq-s3c64xx.h"
-#endif
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 4469e7f555e9..fc10ecc3602d 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -441,7 +441,7 @@ config CLKSRC_EXYNOS_MCT
config CLKSRC_SAMSUNG_PWM
bool "PWM timer driver for Samsung S3C, S5P" if COMPILE_TEST
depends on HAS_IOMEM
- depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST
+ depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST
help
This is a new clocksource driver for the PWM timer found in
Samsung S3C, S5P and Exynos SoCs, replacing an earlier driver
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index f427c8ea5c7b..84d21e0a7cdf 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1009,8 +1009,7 @@ config I2C_RZV2M
config I2C_S3C2410
tristate "S3C/Exynos I2C Driver"
- depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || \
- ARCH_S5PV210 || COMPILE_TEST
+ depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST
help
Say Y here to include support for I2C controller in the
Samsung SoCs (S3C, S5Pv210, Exynos).
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 36dab9cd208c..45e9df81345a 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -116,9 +116,6 @@ struct s3c24xx_i2c {
struct s3c2410_platform_i2c *pdata;
struct gpio_desc *gpios[2];
struct pinctrl *pctrl;
-#if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
- struct notifier_block freq_transition;
-#endif
struct regmap *sysreg;
unsigned int sys_i2c_cfg;
};
@@ -885,65 +882,6 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
return 0;
}
-#if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
-
-#define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition)
-
-static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
- unsigned long val, void *data)
-{
- struct s3c24xx_i2c *i2c = freq_to_i2c(nb);
- unsigned int got;
- int delta_f;
- int ret;
-
- delta_f = clk_get_rate(i2c->clk) - i2c->clkrate;
-
- /* if we're post-change and the input clock has slowed down
- * or at pre-change and the clock is about to speed up, then
- * adjust our clock rate. <0 is slow, >0 speedup.
- */
-
- if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) ||
- (val == CPUFREQ_PRECHANGE && delta_f > 0)) {
- i2c_lock_bus(&i2c->adap, I2C_LOCK_ROOT_ADAPTER);
- ret = s3c24xx_i2c_clockrate(i2c, &got);
- i2c_unlock_bus(&i2c->adap, I2C_LOCK_ROOT_ADAPTER);
-
- if (ret < 0)
- dev_err(i2c->dev, "cannot find frequency (%d)\n", ret);
- else
- dev_info(i2c->dev, "setting freq %d\n", got);
- }
-
- return 0;
-}
-
-static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
-{
- i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition;
-
- return cpufreq_register_notifier(&i2c->freq_transition,
- CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
-{
- cpufreq_unregister_notifier(&i2c->freq_transition,
- CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-#else
-static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
-{
- return 0;
-}
-
-static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
-{
-}
-#endif
-
#ifdef CONFIG_OF
static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
{
@@ -1152,13 +1090,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
}
}
- ret = s3c24xx_i2c_register_cpufreq(i2c);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
- clk_unprepare(i2c->clk);
- return ret;
- }
-
/*
* Note, previous versions of the driver used i2c_add_adapter()
* to add the bus at any number. We now pass the bus number via
@@ -1175,7 +1106,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
ret = i2c_add_numbered_adapter(&i2c->adap);
if (ret < 0) {
pm_runtime_disable(&pdev->dev);
- s3c24xx_i2c_deregister_cpufreq(i2c);
clk_unprepare(i2c->clk);
return ret;
}
@@ -1192,8 +1122,6 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
pm_runtime_disable(&pdev->dev);
- s3c24xx_i2c_deregister_cpufreq(i2c);
-
i2c_del_adapter(&i2c->adap);
return 0;
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 791612ca6012..9de7f05d40e2 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -437,11 +437,11 @@ config EP93XX_ADC
config EXYNOS_ADC
tristate "Exynos ADC driver support"
- depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST)
+ depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST)
depends on HAS_IOMEM
help
- Driver for the ADC block found in the Samsung S3C (S3C2410, S3C2416,
- S3C2440, S3C2443, S3C6410), S5Pv210 and Exynos SoCs.
+ Driver for the ADC block found in the Samsung S3C6410, S5Pv210 and
+ Exynos SoCs.
Choose Y here only if you build for such Samsung SoC.
To compile this driver as a module, choose M here: the module will be
diff --git a/drivers/media/platform/samsung/s3c-camif/Kconfig b/drivers/media/platform/samsung/s3c-camif/Kconfig
index 8cb8d1ac3edc..f359f6382fff 100644
--- a/drivers/media/platform/samsung/s3c-camif/Kconfig
+++ b/drivers/media/platform/samsung/s3c-camif/Kconfig
@@ -1,15 +1,15 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_S3C_CAMIF
- tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
+ tristate "Samsung 3C64XX SoC Camera Interface driver"
depends on V4L_PLATFORM_DRIVERS
depends on VIDEO_DEV && I2C && PM
- depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST
+ depends on ARCH_S3C64XX || COMPILE_TEST
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
help
- This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
- host interface (CAMIF).
+ This is a v4l2 driver for s3c64xx SoC series camera host interface
+ (CAMIF).
To compile this driver as a module, choose M here: the module
will be called s3c-camif.
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 84dd37ff2735..79d8ddf1f616 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -312,9 +312,8 @@ config MMC_SDHCI_S3C
depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
help
This selects the Secure Digital Host Controller Interface (SDHCI)
- often referrered to as the HSMMC block in some of the Samsung S3C
- (S3C2416, S3C2443, S3C6410), S5Pv210 and Exynos (Exynso4210,
- Exynos4412) SoCs.
+ often referrered to as the HSMMC block in some of the Samsung
+ S3C6410, S5Pv210 and Exynos (Exynso4210, Exynos4412) SoCs.
If you have a controller with this interface (thereforeyou build for
such Samsung SoC), say Y or M here.
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 280a55139387..a347833b8f29 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -79,7 +79,7 @@ config MTD_NAND_NDFC
config MTD_NAND_S3C2410
tristate "Samsung S3C NAND controller"
- depends on ARCH_S3C24XX || ARCH_S3C64XX
+ depends on ARCH_S3C64XX
help
This enables the NAND flash controller on the S3C24xx and S3C64xx
SoCs
diff --git a/drivers/mtd/nand/raw/s3c2410.c b/drivers/mtd/nand/raw/s3c2410.c
index f0a4535c812a..80d96f94d6cb 100644
--- a/drivers/mtd/nand/raw/s3c2410.c
+++ b/drivers/mtd/nand/raw/s3c2410.c
@@ -166,10 +166,6 @@ struct s3c2410_nand_info {
enum s3c_nand_clk_state clk_state;
enum s3c_cpu_type cpu_type;
-
-#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
- struct notifier_block freq_transition;
-#endif
};
struct s3c24XX_nand_devtype_data {
@@ -711,54 +707,6 @@ static void s3c2440_nand_write_buf(struct nand_chip *this, const u_char *buf,
}
}
-/* cpufreq driver support */
-
-#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
-
-static int s3c2410_nand_cpufreq_transition(struct notifier_block *nb,
- unsigned long val, void *data)
-{
- struct s3c2410_nand_info *info;
- unsigned long newclk;
-
- info = container_of(nb, struct s3c2410_nand_info, freq_transition);
- newclk = clk_get_rate(info->clk);
-
- if ((val == CPUFREQ_POSTCHANGE && newclk < info->clk_rate) ||
- (val == CPUFREQ_PRECHANGE && newclk > info->clk_rate)) {
- s3c2410_nand_setrate(info);
- }
-
- return 0;
-}
-
-static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
-{
- info->freq_transition.notifier_call = s3c2410_nand_cpufreq_transition;
-
- return cpufreq_register_notifier(&info->freq_transition,
- CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-static inline void
-s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
-{
- cpufreq_unregister_notifier(&info->freq_transition,
- CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-#else
-static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
-{
- return 0;
-}
-
-static inline void
-s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
-{
-}
-#endif
-
/* device management functions */
static int s3c24xx_nand_remove(struct platform_device *pdev)
@@ -768,8 +716,6 @@ static int s3c24xx_nand_remove(struct platform_device *pdev)
if (info == NULL)
return 0;
- s3c2410_nand_cpufreq_deregister(info);
-
/* Release all our mtds and their partitions, then go through
* freeing the resources used
*/
@@ -1184,12 +1130,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
if (err != 0)
goto exit_error;
- err = s3c2410_nand_cpufreq_register(info);
- if (err < 0) {
- dev_err(&pdev->dev, "failed to init cpufreq support\n");
- goto exit_error;
- }
-
if (allow_clk_suspend(info)) {
dev_info(&pdev->dev, "clock idle support enabled\n");
s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index bd13b5ef246d..1a478854293f 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1322,16 +1322,6 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
#ifdef CONFIG_PINCTRL_S3C64XX
{ .compatible = "samsung,s3c64xx-pinctrl",
.data = &s3c64xx_of_data },
-#endif
-#ifdef CONFIG_PINCTRL_S3C24XX
- { .compatible = "samsung,s3c2412-pinctrl",
- .data = &s3c2412_of_data },
- { .compatible = "samsung,s3c2416-pinctrl",
- .data = &s3c2416_of_data },
- { .compatible = "samsung,s3c2440-pinctrl",
- .data = &s3c2440_of_data },
- { .compatible = "samsung,s3c2450-pinctrl",
- .data = &s3c2450_of_data },
#endif
{},
};
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 312dccfa3f18..d13ca620ea5d 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1406,18 +1406,14 @@ config RTC_DRV_OMAP
config RTC_DRV_S3C
tristate "Samsung S3C series SoC RTC"
- depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S3C24XX || ARCH_S5PV210 || \
+ depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || \
COMPILE_TEST
help
RTC (Realtime Clock) driver for the clock inbuilt into the
- Samsung S3C24XX series of SoCs. This can provide periodic
+ Samsung S3C64XX series of SoCs. This can provide periodic
interrupt rates from 1Hz to 64Hz for user programs, and
wakeup from Alarm.
- The driver currently supports the common features on all the
- S3C24XX range, such as the S3C2410, S3C2412, S3C2413, S3C2440
- and S3C2442.
-
This driver can also be build as a module. If so, the module
will be called rtc-s3c.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 434f83168546..3ba8a39655a3 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -242,23 +242,23 @@ config SERIAL_SAMSUNG
select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung
- S3C24xx/S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing
+ S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing
/dev/ttySAC0, 1 and 2 (note, some machines may not provide all of
these ports, depending on how the serial port pins are configured.
+
Choose Y/M here only if you build for such SoC.
config SERIAL_SAMSUNG_UARTS_4
bool
depends on SERIAL_SAMSUNG
- default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
+ default y
help
Internal node for the common case of 4 Samsung compatible UARTs
config SERIAL_SAMSUNG_UARTS
int
depends on SERIAL_SAMSUNG
- default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
- default 3
+ default 4
help
Select the number of available UART ports for the Samsung S3C
serial driver
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 77d1363029f5..5adf3963b2f6 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -152,10 +152,6 @@ struct s3c24xx_uart_port {
const struct s3c2410_uartcfg *cfg;
struct s3c24xx_uart_dma *dma;
-
-#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
- struct notifier_block freq_transition;
-#endif
};
static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport);
@@ -1859,93 +1855,6 @@ static void s3c24xx_serial_resetport(struct uart_port *port,
udelay(1);
}
-#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
-
-static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
- unsigned long val, void *data)
-{
- struct s3c24xx_uart_port *port;
- struct uart_port *uport;
-
- port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
- uport = &port->port;
-
- /* check to see if port is enabled */
-
- if (port->pm_level != 0)
- return 0;
-
- /* try and work out if the baudrate is changing, we can detect
- * a change in rate, but we do not have support for detecting
- * a disturbance in the clock-rate over the change.
- */
-
- if (IS_ERR(port->baudclk))
- goto exit;
-
- if (port->baudclk_rate == clk_get_rate(port->baudclk))
- goto exit;
-
- if (val == CPUFREQ_PRECHANGE) {
- /* we should really shut the port down whilst the
- * frequency change is in progress.
- */
-
- } else if (val == CPUFREQ_POSTCHANGE) {
- struct ktermios *termios;
- struct tty_struct *tty;
-
- if (uport->state == NULL)
- goto exit;
-
- tty = uport->state->port.tty;
-
- if (tty == NULL)
- goto exit;
-
- termios = &tty->termios;
-
- if (termios == NULL) {
- dev_warn(uport->dev, "%s: no termios?\n", __func__);
- goto exit;
- }
-
- s3c24xx_serial_set_termios(uport, termios, NULL);
- }
-
-exit:
- return 0;
-}
-
-static inline int
-s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
-{
- port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
-
- return cpufreq_register_notifier(&port->freq_transition,
- CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-static inline void
-s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
-{
- cpufreq_unregister_notifier(&port->freq_transition,
- CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-#else
-static inline int
-s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
-{
- return 0;
-}
-
-static inline void
-s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
-{
-}
-#endif
-
static int s3c24xx_serial_enable_baudclk(struct s3c24xx_uart_port *ourport)
{
struct device *dev = ourport->port.dev;
@@ -2237,10 +2146,6 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
if (!IS_ERR(ourport->baudclk))
clk_disable_unprepare(ourport->baudclk);
- ret = s3c24xx_serial_cpufreq_register(ourport);
- if (ret < 0)
- dev_err(&pdev->dev, "failed to add cpufreq notifier\n");
-
probe_index++;
return 0;
@@ -2251,7 +2156,6 @@ static int s3c24xx_serial_remove(struct platform_device *dev)
struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
if (port) {
- s3c24xx_serial_cpufreq_deregister(to_ourport(port));
uart_remove_one_port(&s3c24xx_uart_drv, port);
}
@@ -2589,94 +2493,6 @@ static struct console s3c24xx_serial_console = {
};
#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
-#ifdef CONFIG_CPU_S3C2410
-static const struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
- .info = {
- .name = "Samsung S3C2410 UART",
- .type = TYPE_S3C24XX,
- .port_type = PORT_S3C2410,
- .fifosize = 16,
- .rx_fifomask = S3C2410_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2410_UFSTAT_RXFULL,
- .tx_fifofull = S3C2410_UFSTAT_TXFULL,
- .tx_fifomask = S3C2410_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
- .def_clk_sel = S3C2410_UCON_CLKSEL0,
- .num_clks = 2,
- .clksel_mask = S3C2410_UCON_CLKMASK,
- .clksel_shift = S3C2410_UCON_CLKSHIFT,
- },
- .def_cfg = {
- .ucon = S3C2410_UCON_DEFAULT,
- .ufcon = S3C2410_UFCON_DEFAULT,
- },
-};
-#define S3C2410_SERIAL_DRV_DATA (&s3c2410_serial_drv_data)
-#else
-#define S3C2410_SERIAL_DRV_DATA NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-static const struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
- .info = {
- .name = "Samsung S3C2412 UART",
- .type = TYPE_S3C24XX,
- .port_type = PORT_S3C2412,
- .fifosize = 64,
- .has_divslot = 1,
- .rx_fifomask = S3C2440_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2440_UFSTAT_RXFULL,
- .tx_fifofull = S3C2440_UFSTAT_TXFULL,
- .tx_fifomask = S3C2440_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
- .def_clk_sel = S3C2410_UCON_CLKSEL2,
- .num_clks = 4,
- .clksel_mask = S3C2412_UCON_CLKMASK,
- .clksel_shift = S3C2412_UCON_CLKSHIFT,
- },
- .def_cfg = {
- .ucon = S3C2410_UCON_DEFAULT,
- .ufcon = S3C2410_UFCON_DEFAULT,
- },
-};
-#define S3C2412_SERIAL_DRV_DATA (&s3c2412_serial_drv_data)
-#else
-#define S3C2412_SERIAL_DRV_DATA NULL
-#endif
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \
- defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442)
-static const struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
- .info = {
- .name = "Samsung S3C2440 UART",
- .type = TYPE_S3C24XX,
- .port_type = PORT_S3C2440,
- .fifosize = 64,
- .has_divslot = 1,
- .rx_fifomask = S3C2440_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2440_UFSTAT_RXFULL,
- .tx_fifofull = S3C2440_UFSTAT_TXFULL,
- .tx_fifomask = S3C2440_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
- .def_clk_sel = S3C2410_UCON_CLKSEL2,
- .num_clks = 4,
- .clksel_mask = S3C2412_UCON_CLKMASK,
- .clksel_shift = S3C2412_UCON_CLKSHIFT,
- .ucon_mask = S3C2440_UCON0_DIVMASK,
- },
- .def_cfg = {
- .ucon = S3C2410_UCON_DEFAULT,
- .ufcon = S3C2410_UFCON_DEFAULT,
- },
-};
-#define S3C2440_SERIAL_DRV_DATA (&s3c2440_serial_drv_data)
-#else
-#define S3C2440_SERIAL_DRV_DATA NULL
-#endif
-
#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
static const struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
.info = {
@@ -2845,15 +2661,6 @@ static const struct s3c24xx_serial_drv_data artpec8_serial_drv_data = {
static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
{
- .name = "s3c2410-uart",
- .driver_data = (kernel_ulong_t)S3C2410_SERIAL_DRV_DATA,
- }, {
- .name = "s3c2412-uart",
- .driver_data = (kernel_ulong_t)S3C2412_SERIAL_DRV_DATA,
- }, {
- .name = "s3c2440-uart",
- .driver_data = (kernel_ulong_t)S3C2440_SERIAL_DRV_DATA,
- }, {
.name = "s3c6400-uart",
.driver_data = (kernel_ulong_t)S3C6400_SERIAL_DRV_DATA,
}, {
@@ -2881,12 +2688,6 @@ MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
#ifdef CONFIG_OF
static const struct of_device_id s3c24xx_uart_dt_match[] = {
- { .compatible = "samsung,s3c2410-uart",
- .data = S3C2410_SERIAL_DRV_DATA },
- { .compatible = "samsung,s3c2412-uart",
- .data = S3C2412_SERIAL_DRV_DATA },
- { .compatible = "samsung,s3c2440-uart",
- .data = S3C2440_SERIAL_DRV_DATA },
{ .compatible = "samsung,s3c6400-uart",
.data = S3C6400_SERIAL_DRV_DATA },
{ .compatible = "samsung,s5pv210-uart",
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index fb7b603dddf8..8ba4fe9364b1 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -443,12 +443,12 @@ config USB_OHCI_HCD_STI
STMicroelectronics consumer electronics SoC's.
config USB_OHCI_HCD_S3C2410
- tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
- depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST)
- default y if (ARCH_S3C24XX || ARCH_S3C64XX)
+ tristate "OHCI support for Samsung S3C64xx SoC series"
+ depends on USB_OHCI_HCD && (ARCH_S3C64XX || COMPILE_TEST)
+ default ARCH_S3C64XX
help
Enables support for the on-chip OHCI controller on
- S3C24xx/S3C64xx chips.
+ S3C64xx chips.
config USB_OHCI_HCD_LPC32XX
tristate "Support for LPC on-chip OHCI USB controller"
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b64bc49c7f30..eee7df45347a 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -491,14 +491,13 @@ config IXP4XX_WATCHDOG
Say N if you are unsure.
config S3C2410_WATCHDOG
- tristate "S3C2410 Watchdog"
- depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || \
- COMPILE_TEST
+ tristate "S3C6410/S5Pv210/Exynos Watchdog"
+ depends on ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select WATCHDOG_CORE
select MFD_SYSCON if ARCH_EXYNOS
help
- Watchdog timer block in the Samsung S3C24xx, S3C64xx, S5Pv210 and
- Exynos SoCs. This will reboot the system when the timer expires with
+ Watchdog timer block in the Samsung S3C64xx, S5Pv210 and Exynos
+ SoCs. This will reboot the system when the timer expires with
the watchdog enabled.
The driver is limited by the speed of the system's PCLK
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index d3fc8ed886ff..200ba236a72e 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -562,73 +562,6 @@ static irqreturn_t s3c2410wdt_irq(int irqno, void *param)
return IRQ_HANDLED;
}
-#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
-
-static int s3c2410wdt_cpufreq_transition(struct notifier_block *nb,
- unsigned long val, void *data)
-{
- int ret;
- struct s3c2410_wdt *wdt = freq_to_wdt(nb);
-
- if (!s3c2410wdt_is_running(wdt))
- goto done;
-
- if (val == CPUFREQ_PRECHANGE) {
- /* To ensure that over the change we don't cause the
- * watchdog to trigger, we perform an keep-alive if
- * the watchdog is running.
- */
-
- s3c2410wdt_keepalive(&wdt->wdt_device);
- } else if (val == CPUFREQ_POSTCHANGE) {
- s3c2410wdt_stop(&wdt->wdt_device);
-
- ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
- wdt->wdt_device.timeout);
-
- if (ret >= 0)
- s3c2410wdt_start(&wdt->wdt_device);
- else
- goto err;
- }
-
-done:
- return 0;
-
- err:
- dev_err(wdt->dev, "cannot set new value for timeout %d\n",
- wdt->wdt_device.timeout);
- return ret;
-}
-
-static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
-{
- wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;
-
- return cpufreq_register_notifier(&wdt->freq_transition,
- CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
-{
- wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;
-
- cpufreq_unregister_notifier(&wdt->freq_transition,
- CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-#else
-
-static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
-{
- return 0;
-}
-
-static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
-{
-}
-#endif
-
static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt)
{
unsigned int rst_stat;
@@ -761,12 +694,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
wdt->wdt_device.min_timeout = 1;
wdt->wdt_device.max_timeout = s3c2410wdt_max_timeout(wdt);
- ret = s3c2410wdt_cpufreq_register(wdt);
- if (ret < 0) {
- dev_err(dev, "failed to register cpufreq\n");
- goto err_src_clk;
- }
-
watchdog_set_drvdata(&wdt->wdt_device, wdt);
/* see if we can actually set the requested timer margin, and if
@@ -783,7 +710,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
S3C2410_WATCHDOG_DEFAULT_TIME);
} else {
dev_err(dev, "failed to use default timeout\n");
- goto err_cpufreq;
+ goto err_src_clk;
}
}
@@ -791,7 +718,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
pdev->name, pdev);
if (ret != 0) {
dev_err(dev, "failed to install irq (%d)\n", ret);
- goto err_cpufreq;
+ goto err_src_clk;
}
watchdog_set_nowayout(&wdt->wdt_device, nowayout);
@@ -817,7 +744,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
ret = watchdog_register_device(&wdt->wdt_device);
if (ret)
- goto err_cpufreq;
+ goto err_src_clk;
ret = s3c2410wdt_enable(wdt, true);
if (ret < 0)
@@ -839,9 +766,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
err_unregister:
watchdog_unregister_device(&wdt->wdt_device);
- err_cpufreq:
- s3c2410wdt_cpufreq_deregister(wdt);
-
err_src_clk:
clk_disable_unprepare(wdt->src_clk);
@@ -862,8 +786,6 @@ static int s3c2410wdt_remove(struct platform_device *dev)
watchdog_unregister_device(&wdt->wdt_device);
- s3c2410wdt_cpufreq_deregister(wdt);
-
clk_disable_unprepare(wdt->src_clk);
clk_disable_unprepare(wdt->bus_clk);
diff --git a/include/linux/clk/samsung.h b/include/linux/clk/samsung.h
index 38b774001712..0cf7aac83439 100644
--- a/include/linux/clk/samsung.h
+++ b/include/linux/clk/samsung.h
@@ -21,36 +21,4 @@ static inline void s3c64xx_clk_init(struct device_node *np,
bool s3c6400, void __iomem *base) { }
#endif /* CONFIG_S3C64XX_COMMON_CLK */
-#ifdef CONFIG_S3C2410_COMMON_CLK
-void s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
- int current_soc,
- void __iomem *reg_base);
-#else
-static inline void s3c2410_common_clk_init(struct device_node *np,
- unsigned long xti_f,
- int current_soc,
- void __iomem *reg_base) { }
-#endif /* CONFIG_S3C2410_COMMON_CLK */
-
-#ifdef CONFIG_S3C2412_COMMON_CLK
-void s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
- unsigned long ext_f, void __iomem *reg_base);
-#else
-static inline void s3c2412_common_clk_init(struct device_node *np,
- unsigned long xti_f,
- unsigned long ext_f,
- void __iomem *reg_base) { }
-#endif /* CONFIG_S3C2412_COMMON_CLK */
-
-#ifdef CONFIG_S3C2443_COMMON_CLK
-void s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
- int current_soc,
- void __iomem *reg_base);
-#else
-static inline void s3c2443_common_clk_init(struct device_node *np,
- unsigned long xti_f,
- int current_soc,
- void __iomem *reg_base) { }
-#endif /* CONFIG_S3C2443_COMMON_CLK */
-
#endif /* __LINUX_CLK_SAMSUNG_H_ */
diff --git a/include/linux/soc/samsung/s3c-pm.h b/include/linux/soc/samsung/s3c-pm.h
index f9164559c99f..5b23d85d20ab 100644
--- a/include/linux/soc/samsung/s3c-pm.h
+++ b/include/linux/soc/samsung/s3c-pm.h
@@ -14,58 +14,10 @@
/* PM debug functions */
-/**
- * struct pm_uart_save - save block for core UART
- * @ulcon: Save value for S3C2410_ULCON
- * @ucon: Save value for S3C2410_UCON
- * @ufcon: Save value for S3C2410_UFCON
- * @umcon: Save value for S3C2410_UMCON
- * @ubrdiv: Save value for S3C2410_UBRDIV
- *
- * Save block for UART registers to be held over sleep and restored if they
- * are needed (say by debug).
-*/
-struct pm_uart_save {
- u32 ulcon;
- u32 ucon;
- u32 ufcon;
- u32 umcon;
- u32 ubrdiv;
- u32 udivslot;
-};
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-/**
- * s3c_pm_dbg() - low level debug function for use in suspend/resume.
- * @msg: The message to print.
- *
- * This function is used mainly to debug the resume process before the system
- * can rely on printk/console output. It uses the low-level debugging output
- * routine printascii() to do its work.
- */
-extern void s3c_pm_dbg(const char *msg, ...);
-
-#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
-
-extern void s3c_pm_save_uarts(bool is_s3c24xx);
-extern void s3c_pm_restore_uarts(bool is_s3c24xx);
-
-#ifdef CONFIG_ARCH_S3C64XX
-extern void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save);
-#else
-static inline void
-s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
-{
-}
-#endif
-
-#else
#define S3C_PMDBG(fmt...) pr_debug(fmt)
static inline void s3c_pm_save_uarts(bool is_s3c24xx) { }
static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { }
-#endif
/* suspend memory checking */
@@ -81,14 +33,4 @@ extern void s3c_pm_check_store(void);
#define s3c_pm_check_store() do { } while (0)
#endif
-/* system device subsystems */
-
-extern struct bus_type s3c2410_subsys;
-extern struct bus_type s3c2410a_subsys;
-extern struct bus_type s3c2412_subsys;
-extern struct bus_type s3c2416_subsys;
-extern struct bus_type s3c2440_subsys;
-extern struct bus_type s3c2442_subsys;
-extern struct bus_type s3c2443_subsys;
-
#endif
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 03/21] ARM: s3c: remove most s3c64xx board support
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
2022-10-21 20:27 ` [PATCH 01/21] ARM: s3c: remove all s3c24xx support Arnd Bergmann
2022-10-21 20:27 ` [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:26 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 04/21] ARM: s3c: remove adc.c Arnd Bergmann
` (19 subsequent siblings)
22 siblings, 1 reply; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Kwangwoo Lee, Peter Korsgaard, Darius Augulis, Maurus Cuelenaere,
Alim Akhtar, Heiko Stuebner, Juerg Haefliger, Sam Protsenko,
linux-samsung-soc
From: Arnd Bergmann <arnd@arndb.de>
All traditional board files except for MACH_WLF_CRAGG_6410 were
marked as unused, so remove them now.
Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Maurus Cuelenaere <mcuelenaere@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c/Kconfig.s3c64xx | 206 -------
arch/arm/mach-s3c/Makefile.s3c64xx | 13 -
arch/arm/mach-s3c/dev-backlight-s3c64xx.c | 137 -----
arch/arm/mach-s3c/mach-anw6410.c | 230 -------
arch/arm/mach-s3c/mach-hmt.c | 282 ---------
arch/arm/mach-s3c/mach-mini6410.c | 365 -----------
arch/arm/mach-s3c/mach-ncp.c | 100 ---
arch/arm/mach-s3c/mach-real6410.c | 333 ----------
arch/arm/mach-s3c/mach-smartq.c | 424 -------------
arch/arm/mach-s3c/mach-smartq.h | 16 -
arch/arm/mach-s3c/mach-smartq5.c | 154 -----
arch/arm/mach-s3c/mach-smartq7.c | 170 ------
arch/arm/mach-s3c/mach-smdk6400.c | 90 ---
arch/arm/mach-s3c/mach-smdk6410.c | 706 ----------------------
14 files changed, 3226 deletions(-)
delete mode 100644 arch/arm/mach-s3c/dev-backlight-s3c64xx.c
delete mode 100644 arch/arm/mach-s3c/mach-anw6410.c
delete mode 100644 arch/arm/mach-s3c/mach-hmt.c
delete mode 100644 arch/arm/mach-s3c/mach-mini6410.c
delete mode 100644 arch/arm/mach-s3c/mach-ncp.c
delete mode 100644 arch/arm/mach-s3c/mach-real6410.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq.h
delete mode 100644 arch/arm/mach-s3c/mach-smartq5.c
delete mode 100644 arch/arm/mach-s3c/mach-smartq7.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk6400.c
delete mode 100644 arch/arm/mach-s3c/mach-smdk6410.c
diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index 0c1b91c3ac5f..0da214c43fba 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -54,17 +54,6 @@ config S3C64XX_SETUP_SDHCI
Internal configuration for default SDHCI setup for S3C6400 and
S3C6410 SoCs.
-config S3C64XX_DEV_ONENAND1
- bool
- help
- Compile in platform device definition for OneNAND1 controller
-
-config SAMSUNG_DEV_BACKLIGHT
- bool
- depends on SAMSUNG_DEV_PWM
- help
- Compile in platform device definition LCD backlight with PWM Timer
-
# platform specific device setup
config S3C64XX_SETUP_I2C0
@@ -113,201 +102,6 @@ config S3C64XX_SETUP_USB_PHY
# S36400 Macchine support
-config MACH_SMDK6400
- bool "SMDK6400"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6400
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_HSMMC1
- help
- Machine support for the Samsung SMDK6400
-
-# S3C6410 machine support
-
-config MACH_ANW6410
- bool "A&W6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C_DEV_FB
- help
- Machine support for the A&W6410
-
-config MACH_MINI6410
- bool "MINI6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_TS
- help
- Machine support for the FriendlyARM MINI6410
-
-config MACH_REAL6410
- bool "REAL6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_TS
- help
- Machine support for the CoreWind REAL6410
-
-config MACH_SMDK6410
- bool "SMDK6410"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_I2C1
- select S3C64XX_SETUP_IDE
- select S3C64XX_SETUP_KEYPAD
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_USB_PHY
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_IDE
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
- prompt "SMDK6410 MMC/SD slot setup"
- depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
- bool "Use channel 0 only"
- depends on MACH_SMDK6410
- help
- Select CON7 (channel 0) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-config SMDK6410_SD_CH1
- bool "Use channel 1 only"
- depends on MACH_SMDK6410
- help
- Select CON6 (channel 1) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
- bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
- depends on MACH_SMDK6410
- depends on I2C=y
- select MFD_WM8350_I2C
- select REGULATOR
- select REGULATOR_WM8350
- help
- The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
- and audio daughtercard for the Samsung SMDK6410 reference
- platform. Enabling this option will build support for this
- module into the kernel. The presence of the module will be
- detected at runtime so the resulting kernel can be used
- with or without the 1190-EV1 fitted.
-
-config SMDK6410_WM1192_EV1
- bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
- depends on MACH_SMDK6410
- depends on I2C=y
- select MFD_WM831X
- select MFD_WM831X_I2C
- select REGULATOR
- select REGULATOR_WM831X
- help
- The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
- daughtercard for the Samsung SMDK6410 reference platform.
- Enabling this option will build support for this module into
- the kernel. The presence of the daughtercard will be
- detected at runtime so the resulting kernel can be used
- with or without the 1192-EV1 fitted.
-
-config MACH_NCP
- bool "NCP"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_I2C1
- select S3C_DEV_HSMMC1
- select S3C_DEV_I2C1
- help
- Machine support for the Samsung NCP
-
-config MACH_HMT
- bool "Airgoo HMT"
- depends on ATAGS && UNUSED_BOARD_FILES
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C_DEV_FB
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select SAMSUNG_DEV_PWM
- help
- Machine support for the Airgoo HMT
-
-config MACH_SMARTQ
- bool
- select CPU_S3C6410
- select S3C64XX_SETUP_FB_24BPP
- select S3C64XX_SETUP_SDHCI
- select S3C64XX_SETUP_USB_PHY
- select S3C_DEV_FB
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HWMON
- select S3C_DEV_RTC
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_TS
- help
- Shared machine support for SmartQ 5/7
-
-config MACH_SMARTQ5
- bool "SmartQ 5"
- depends on ATAGS && UNUSED_BOARD_FILES
- select MACH_SMARTQ
- help
- Machine support for the SmartQ 5
-
-config MACH_SMARTQ7
- bool "SmartQ 7"
- depends on ATAGS && UNUSED_BOARD_FILES
- select MACH_SMARTQ
- help
- Machine support for the SmartQ 7
-
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
depends on ATAGS
diff --git a/arch/arm/mach-s3c/Makefile.s3c64xx b/arch/arm/mach-s3c/Makefile.s3c64xx
index 21e919bf2cd1..ba179a22c2af 100644
--- a/arch/arm/mach-s3c/Makefile.s3c64xx
+++ b/arch/arm/mach-s3c/Makefile.s3c64xx
@@ -39,20 +39,7 @@ obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy-s3c64xx.o
-obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight-s3c64xx.o
-
# Machine support
-
-obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
-obj-$(CONFIG_MACH_HMT) += mach-hmt.o
-obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
-obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
-obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
-obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
-obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
-obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
-obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
endif
diff --git a/arch/arm/mach-s3c/dev-backlight-s3c64xx.c b/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
deleted file mode 100644
index 65488b61e50c..000000000000
diff --git a/arch/arm/mach-s3c/mach-anw6410.c b/arch/arm/mach-s3c/mach-anw6410.c
deleted file mode 100644
index b67eae43e04f..000000000000
diff --git a/arch/arm/mach-s3c/mach-hmt.c b/arch/arm/mach-s3c/mach-hmt.c
deleted file mode 100644
index 49ba16c447aa..000000000000
diff --git a/arch/arm/mach-s3c/mach-mini6410.c b/arch/arm/mach-s3c/mach-mini6410.c
deleted file mode 100644
index 058ae9e8b89f..000000000000
diff --git a/arch/arm/mach-s3c/mach-ncp.c b/arch/arm/mach-s3c/mach-ncp.c
deleted file mode 100644
index 1e65f8bce5c4..000000000000
diff --git a/arch/arm/mach-s3c/mach-real6410.c b/arch/arm/mach-s3c/mach-real6410.c
deleted file mode 100644
index 8c10ebc38a9c..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq.c b/arch/arm/mach-s3c/mach-smartq.c
deleted file mode 100644
index 5b6e7c2a85ef..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq.h b/arch/arm/mach-s3c/mach-smartq.h
deleted file mode 100644
index f98132f4f430..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq5.c b/arch/arm/mach-s3c/mach-smartq5.c
deleted file mode 100644
index ce3fce0bba20..000000000000
diff --git a/arch/arm/mach-s3c/mach-smartq7.c b/arch/arm/mach-s3c/mach-smartq7.c
deleted file mode 100644
index 78ca0e704797..000000000000
diff --git a/arch/arm/mach-s3c/mach-smdk6400.c b/arch/arm/mach-s3c/mach-smdk6400.c
deleted file mode 100644
index a3c1b2a82455..000000000000
diff --git a/arch/arm/mach-s3c/mach-smdk6410.c b/arch/arm/mach-s3c/mach-smdk6410.c
deleted file mode 100644
index e57b2bb61484..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 04/21] ARM: s3c: remove adc.c
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (2 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 03/21] ARM: s3c: remove most s3c64xx board support Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 11:37 ` Mark Brown
2022-10-24 12:27 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 05/21] ARM: s3c: simplify platform code Arnd Bergmann
` (18 subsequent siblings)
22 siblings, 2 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Linus Walleij, Uwe Kleine-König, Tomasz Figa,
Mark Brown, linux-samsung-soc, patches
From: Arnd Bergmann <arnd@arndb.de>
This driver could not be enabled on s3c64xx for a long time
because of the ARCH_MULTIPLATFORM dependency, so remove it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c/Kconfig | 15 -
arch/arm/mach-s3c/Kconfig.s3c64xx | 1 -
arch/arm/mach-s3c/Makefile | 4 -
arch/arm/mach-s3c/adc.c | 510 ----------------------------
arch/arm/mach-s3c/mach-crag6410.c | 1 -
arch/arm/mach-s3c/regs-adc.h | 64 ----
include/linux/soc/samsung/s3c-adc.h | 32 --
7 files changed, 627 deletions(-)
delete mode 100644 arch/arm/mach-s3c/adc.c
delete mode 100644 arch/arm/mach-s3c/regs-adc.h
delete mode 100644 include/linux/soc/samsung/s3c-adc.h
diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig
index 809f84fca0b8..0dde4010aa64 100644
--- a/arch/arm/mach-s3c/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig
@@ -63,16 +63,6 @@ config S3C_GPIO_TRACK
Internal configuration option to enable the s3c specific gpio
chip tracking if the platform requires it.
-# ADC driver
-
-config S3C_ADC
- bool "ADC common driver support"
- depends on !ARCH_MULTIPLATFORM
- help
- Core support for the ADC block found in the Samsung SoC systems
- for drivers such as the touchscreen and hwmon to use to share
- this resource.
-
# device definitions to compile in
config S3C_DEV_HSMMC
@@ -165,11 +155,6 @@ config S3C_DEV_RTC
help
Compile in platform device definition for RTC
-config SAMSUNG_DEV_ADC
- bool
- help
- Compile in platform device definition for ADC controller
-
config S3C64XX_DEV_SPI0
bool
help
diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index 0da214c43fba..c403d7642f0a 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -125,7 +125,6 @@ config MACH_WLF_CRAGG_6410
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
- select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
help
diff --git a/arch/arm/mach-s3c/Makefile b/arch/arm/mach-s3c/Makefile
index a5135137e648..bae7316be5c7 100644
--- a/arch/arm/mach-s3c/Makefile
+++ b/arch/arm/mach-s3c/Makefile
@@ -8,10 +8,6 @@ include $(src)/Makefile.s3c64xx
obj-y += init.o cpu.o
-# ADC
-
-obj-$(CONFIG_S3C_ADC) += adc.o
-
# devices
obj-$(CONFIG_SAMSUNG_ATAGS) += platformdata.o
diff --git a/arch/arm/mach-s3c/adc.c b/arch/arm/mach-s3c/adc.c
deleted file mode 100644
index 0232520d3c13..000000000000
diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
index 9a45474d1bf7..fab6b3efc9f6 100644
--- a/arch/arm/mach-s3c/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -57,7 +57,6 @@
#include "keypad.h"
#include "devs.h"
#include "cpu.h"
-#include <linux/soc/samsung/s3c-adc.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include "pm.h"
diff --git a/arch/arm/mach-s3c/regs-adc.h b/arch/arm/mach-s3c/regs-adc.h
deleted file mode 100644
index 58953c7381dd..000000000000
diff --git a/include/linux/soc/samsung/s3c-adc.h b/include/linux/soc/samsung/s3c-adc.h
deleted file mode 100644
index 591c94ef957d..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 05/21] ARM: s3c: simplify platform code
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (3 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 04/21] ARM: s3c: remove adc.c Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 11:41 ` Mark Brown
2022-10-24 12:29 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 06/21] ARM: s3c: remove s3c6400 support Arnd Bergmann
` (17 subsequent siblings)
22 siblings, 2 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Mauro Carvalho Chehab
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Mark Brown, Juerg Haefliger, Linus Walleij,
Tomasz Figa, Heiko Stuebner, linux-samsung-soc, linux-media
From: Arnd Bergmann <arnd@arndb.de>
Following down the now unused symbols and header files, some additional
content can be dropped that is used by neither the s3c64xx DT support
nor the crag6410 board.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c/Kconfig | 50 --
arch/arm/mach-s3c/Kconfig.s3c64xx | 5 -
arch/arm/mach-s3c/Makefile | 2 -
arch/arm/mach-s3c/Makefile.s3c64xx | 1 -
arch/arm/mach-s3c/adc-core.h | 24 -
arch/arm/mach-s3c/ata-core-s3c64xx.h | 24 -
arch/arm/mach-s3c/backlight-s3c64xx.h | 22 -
arch/arm/mach-s3c/cpu.h | 47 --
arch/arm/mach-s3c/dev-audio-s3c64xx.c | 127 ----
arch/arm/mach-s3c/devs.c | 725 -------------------
arch/arm/mach-s3c/devs.h | 37 -
arch/arm/mach-s3c/dma-s3c64xx.h | 57 --
arch/arm/mach-s3c/dma.h | 2 -
arch/arm/mach-s3c/gpio-cfg-helpers.h | 124 ----
arch/arm/mach-s3c/gpio-cfg.h | 19 -
arch/arm/mach-s3c/gpio-core.h | 3 -
arch/arm/mach-s3c/gpio-samsung.c | 443 +----------
arch/arm/mach-s3c/iic-core.h | 7 -
arch/arm/mach-s3c/init.c | 26 +-
arch/arm/mach-s3c/map-s3c.h | 37 -
arch/arm/mach-s3c/onenand-core-s3c64xx.h | 32 -
arch/arm/mach-s3c/otom.h | 25 -
arch/arm/mach-s3c/pm-core-s3c64xx.h | 17 -
arch/arm/mach-s3c/pm-s3c64xx.c | 83 ---
arch/arm/mach-s3c/pm.c | 7 +-
arch/arm/mach-s3c/pm.h | 12 -
arch/arm/mach-s3c/regs-srom-s3c64xx.h | 55 --
arch/arm/mach-s3c/s3c6400.c | 6 -
arch/arm/mach-s3c/s3c6410.c | 9 -
arch/arm/mach-s3c/sdhci.h | 25 -
arch/arm/mach-s3c/setup-ide-s3c64xx.c | 40 -
arch/arm/mach-s3c/sleep-s3c64xx.S | 27 -
include/linux/platform_data/media/s5p_hdmi.h | 32 -
33 files changed, 6 insertions(+), 2146 deletions(-)
delete mode 100644 arch/arm/mach-s3c/adc-core.h
delete mode 100644 arch/arm/mach-s3c/ata-core-s3c64xx.h
delete mode 100644 arch/arm/mach-s3c/backlight-s3c64xx.h
delete mode 100644 arch/arm/mach-s3c/dma-s3c64xx.h
delete mode 100644 arch/arm/mach-s3c/dma.h
delete mode 100644 arch/arm/mach-s3c/onenand-core-s3c64xx.h
delete mode 100644 arch/arm/mach-s3c/otom.h
delete mode 100644 arch/arm/mach-s3c/regs-srom-s3c64xx.h
delete mode 100644 arch/arm/mach-s3c/setup-ide-s3c64xx.c
delete mode 100644 include/linux/platform_data/media/s5p_hdmi.h
diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig
index 0dde4010aa64..b3656109f1f7 100644
--- a/arch/arm/mach-s3c/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig
@@ -90,36 +90,6 @@ config S3C_DEV_I2C1
help
Compile in platform device definitions for I2C channel 1
-config S3C_DEV_I2C2
- bool
- help
- Compile in platform device definitions for I2C channel 2
-
-config S3C_DEV_I2C3
- bool
- help
- Compile in platform device definition for I2C controller 3
-
-config S3C_DEV_I2C4
- bool
- help
- Compile in platform device definition for I2C controller 4
-
-config S3C_DEV_I2C5
- bool
- help
- Compile in platform device definition for I2C controller 5
-
-config S3C_DEV_I2C6
- bool
- help
- Compile in platform device definition for I2C controller 6
-
-config S3C_DEV_I2C7
- bool
- help
- Compile in platform device definition for I2C controller 7
-
config S3C_DEV_FB
bool
help
@@ -135,26 +105,6 @@ config S3C_DEV_USB_HSOTG
help
Compile in platform device definition for USB high-speed OtG
-config S3C_DEV_WDT
- bool
- help
- Compile in platform device definition for Watchdog Timer
-
-config S3C_DEV_NAND
- bool
- help
- Compile in platform device definition for NAND controller
-
-config S3C_DEV_ONENAND
- bool
- help
- Compile in platform device definition for OneNAND controller
-
-config S3C_DEV_RTC
- bool
- help
- Compile in platform device definition for RTC
-
config S3C64XX_DEV_SPI0
bool
help
diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index c403d7642f0a..c52c7ce1d8fa 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -15,12 +15,9 @@ menuconfig ARCH_S3C64XX
select HAVE_TCM
select PLAT_SAMSUNG
select PM_GENERIC_DOMAINS if PM
- select S3C_DEV_NAND if ATAGS
select S3C_GPIO_TRACK if ATAGS
- select S3C2410_WATCHDOG
select SAMSUNG_ATAGS if ATAGS
select SAMSUNG_WAKEMASK if PM
- select WATCHDOG
help
Samsung S3C64XX series based systems
@@ -121,10 +118,8 @@ config MACH_WLF_CRAGG_6410
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
- select S3C_DEV_RTC
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
help
diff --git a/arch/arm/mach-s3c/Makefile b/arch/arm/mach-s3c/Makefile
index bae7316be5c7..988c49672715 100644
--- a/arch/arm/mach-s3c/Makefile
+++ b/arch/arm/mach-s3c/Makefile
@@ -11,7 +11,6 @@ obj-y += init.o cpu.o
# devices
obj-$(CONFIG_SAMSUNG_ATAGS) += platformdata.o
-
obj-$(CONFIG_SAMSUNG_ATAGS) += devs.o
obj-$(CONFIG_SAMSUNG_ATAGS) += dev-uart.o
@@ -21,5 +20,4 @@ obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_SAMSUNG_PM) += pm.o pm-common.o
obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o
-
obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
diff --git a/arch/arm/mach-s3c/Makefile.s3c64xx b/arch/arm/mach-s3c/Makefile.s3c64xx
index ba179a22c2af..13cda2fe7b6c 100644
--- a/arch/arm/mach-s3c/Makefile.s3c64xx
+++ b/arch/arm/mach-s3c/Makefile.s3c64xx
@@ -33,7 +33,6 @@ obj-y += dev-audio-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1-s3c64xx.o
-obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi-s3c64xx.o
diff --git a/arch/arm/mach-s3c/adc-core.h b/arch/arm/mach-s3c/adc-core.h
deleted file mode 100644
index 039f6862b6a7..000000000000
diff --git a/arch/arm/mach-s3c/ata-core-s3c64xx.h b/arch/arm/mach-s3c/ata-core-s3c64xx.h
deleted file mode 100644
index 4863ad9d3a42..000000000000
diff --git a/arch/arm/mach-s3c/backlight-s3c64xx.h b/arch/arm/mach-s3c/backlight-s3c64xx.h
deleted file mode 100644
index 2a2b35821d58..000000000000
diff --git a/arch/arm/mach-s3c/cpu.h b/arch/arm/mach-s3c/cpu.h
index 20ff98d05c53..d0adc9b40e25 100644
--- a/arch/arm/mach-s3c/cpu.h
+++ b/arch/arm/mach-s3c/cpu.h
@@ -16,15 +16,6 @@
extern unsigned long samsung_cpu_id;
-#define S3C2410_CPU_ID 0x32410000
-#define S3C2410_CPU_MASK 0xFFFFFFFF
-
-#define S3C24XX_CPU_ID 0x32400000
-#define S3C24XX_CPU_MASK 0xFFF00000
-
-#define S3C2412_CPU_ID 0x32412000
-#define S3C2412_CPU_MASK 0xFFFFF000
-
#define S3C6400_CPU_ID 0x36400000
#define S3C6410_CPU_ID 0x36410000
#define S3C64XX_CPU_MASK 0xFFFFF000
@@ -38,29 +29,9 @@ static inline int is_samsung_##name(void) \
return ((samsung_cpu_id & mask) == (id & mask)); \
}
-IS_SAMSUNG_CPU(s3c2410, S3C2410_CPU_ID, S3C2410_CPU_MASK)
-IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
-IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
-#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
- defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
- defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
- defined(CONFIG_CPU_S3C2443)
-# define soc_is_s3c24xx() is_samsung_s3c24xx()
-# define soc_is_s3c2410() is_samsung_s3c2410()
-#else
-# define soc_is_s3c24xx() 0
-# define soc_is_s3c2410() 0
-#endif
-
-#if defined(CONFIG_CPU_S3C2412)
-# define soc_is_s3c2412() is_samsung_s3c2412()
-#else
-# define soc_is_s3c2412() 0
-#endif
-
#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
# define soc_is_s3c6400() is_samsung_s3c6400()
# define soc_is_s3c6410() is_samsung_s3c6410()
@@ -71,12 +42,6 @@ IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
# define soc_is_s3c64xx() 0
#endif
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
-
-#ifndef KHZ
-#define KHZ (1000)
-#endif
-
#ifndef MHZ
#define MHZ (1000*1000)
#endif
@@ -96,7 +61,6 @@ struct cpu_table {
unsigned long idmask;
void (*map_io)(void);
void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
- void (*init_clocks)(int xtal);
int (*init)(void);
const char *name;
};
@@ -105,24 +69,13 @@ extern void s3c_init_cpu(unsigned long idcode,
struct cpu_table *cpus, unsigned int cputab_size);
/* core initialisation functions */
-
-extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-
extern void s3c64xx_init_cpu(void);
extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c24xx_init_clocks(int xtal);
-
extern void s3c24xx_init_uartdevs(char *name,
struct s3c24xx_uart_resources *res,
struct s3c2410_uartcfg *cfg, int no);
-extern struct syscore_ops s3c2410_pm_syscore_ops;
-extern struct syscore_ops s3c2412_pm_syscore_ops;
-extern struct syscore_ops s3c2416_pm_syscore_ops;
-extern struct syscore_ops s3c244x_pm_syscore_ops;
-
extern struct bus_type s3c6410_subsys;
#endif
diff --git a/arch/arm/mach-s3c/dev-audio-s3c64xx.c b/arch/arm/mach-s3c/dev-audio-s3c64xx.c
index 909e82c148ba..7ce119dc3a72 100644
--- a/arch/arm/mach-s3c/dev-audio-s3c64xx.c
+++ b/arch/arm/mach-s3c/dev-audio-s3c64xx.c
@@ -83,130 +83,3 @@ struct platform_device s3c64xx_device_iis1 = {
},
};
EXPORT_SYMBOL(s3c64xx_device_iis1);
-
-static struct resource s3c64xx_iisv4_resource[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_IISV4, SZ_256),
-};
-
-static struct s3c_audio_pdata i2sv4_pdata = {
- .cfg_gpio = s3c64xx_i2s_cfg_gpio,
- .type = {
- .quirks = QUIRK_PRI_6CHAN,
- },
-};
-
-struct platform_device s3c64xx_device_iisv4 = {
- .name = "samsung-i2s",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c64xx_iisv4_resource),
- .resource = s3c64xx_iisv4_resource,
- .dev = {
- .platform_data = &i2sv4_pdata,
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_iisv4);
-
-
-/* PCM Controller platform_devices */
-
-static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
-{
- unsigned int base;
-
- switch (pdev->id) {
- case 0:
- base = S3C64XX_GPD(0);
- break;
- case 1:
- base = S3C64XX_GPE(0);
- break;
- default:
- printk(KERN_DEBUG "Invalid PCM Controller number: %d\n",
- pdev->id);
- return -EINVAL;
- }
-
- s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
- return 0;
-}
-
-static struct resource s3c64xx_pcm0_resource[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_PCM0, SZ_256),
-};
-
-static struct s3c_audio_pdata s3c_pcm0_pdata = {
- .cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm0 = {
- .name = "samsung-pcm",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c64xx_pcm0_resource),
- .resource = s3c64xx_pcm0_resource,
- .dev = {
- .platform_data = &s3c_pcm0_pdata,
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm0);
-
-static struct resource s3c64xx_pcm1_resource[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_PCM1, SZ_256),
-};
-
-static struct s3c_audio_pdata s3c_pcm1_pdata = {
- .cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm1 = {
- .name = "samsung-pcm",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c64xx_pcm1_resource),
- .resource = s3c64xx_pcm1_resource,
- .dev = {
- .platform_data = &s3c_pcm1_pdata,
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm1);
-
-/* AC97 Controller platform devices */
-
-static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
-{
- return s3c_gpio_cfgpin_range(S3C64XX_GPD(0), 5, S3C_GPIO_SFN(4));
-}
-
-static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
-{
- return s3c_gpio_cfgpin_range(S3C64XX_GPE(0), 5, S3C_GPIO_SFN(4));
-}
-
-static struct resource s3c64xx_ac97_resource[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_AC97, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_AC97),
-};
-
-static struct s3c_audio_pdata s3c_ac97_pdata = {
-};
-
-static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s3c64xx_device_ac97 = {
- .name = "samsung-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c64xx_ac97_resource),
- .resource = s3c64xx_ac97_resource,
- .dev = {
- .platform_data = &s3c_ac97_pdata,
- .dma_mask = &s3c64xx_ac97_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_ac97);
-
-void __init s3c64xx_ac97_setup_gpio(int num)
-{
- if (num == S3C64XX_AC97_GPD)
- s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpd;
- else
- s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
-}
diff --git a/arch/arm/mach-s3c/devs.c b/arch/arm/mach-s3c/devs.c
index a31d1c3038e8..8c26d592d2a3 100644
--- a/arch/arm/mach-s3c/devs.c
+++ b/arch/arm/mach-s3c/devs.c
@@ -21,17 +21,11 @@
#include <linux/dma-mapping.h>
#include <linux/fb.h>
#include <linux/gfp.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
-#include <linux/mtd/partitions.h>
#include <linux/mmc/host.h>
#include <linux/ioport.h>
#include <linux/sizes.h>
-#include <linux/platform_data/s3c-hsudc.h>
#include <linux/platform_data/s3c-hsotg.h>
-#include <linux/platform_data/media/s5p_hdmi.h>
-
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -42,104 +36,19 @@
#include "gpio-samsung.h"
#include "gpio-cfg.h"
-#ifdef CONFIG_PLAT_S3C24XX
-#include "regs-s3c2443-clock.h"
-#endif /* CONFIG_PLAT_S3C24XX */
-
#include "cpu.h"
#include "devs.h"
-#include <linux/soc/samsung/s3c-adc.h>
-#include <linux/platform_data/ata-samsung_cf.h>
#include "fb.h"
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/hwmon-s3c.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include "keypad.h"
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
#include "pwm-core.h"
#include "sdhci.h"
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/usb-ohci-s3c2410.h>
#include "usb-phy.h"
#include <linux/platform_data/asoc-s3c.h>
#include <linux/platform_data/spi-s3c64xx.h>
#define samsung_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
-/* AC97 */
-#ifdef CONFIG_CPU_S3C2440
-static struct resource s3c_ac97_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2440_PA_AC97, S3C2440_SZ_AC97),
- [1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97),
-};
-
-struct platform_device s3c_device_ac97 = {
- .name = "samsung-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_ac97_resource),
- .resource = s3c_ac97_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-#endif /* CONFIG_CPU_S3C2440 */
-
-/* ADC */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_adc_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
- [1] = DEFINE_RES_IRQ(IRQ_TC),
- [2] = DEFINE_RES_IRQ(IRQ_ADC),
-};
-
-struct platform_device s3c_device_adc = {
- .name = "s3c24xx-adc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_adc_resource),
- .resource = s3c_adc_resource,
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#if defined(CONFIG_SAMSUNG_DEV_ADC)
-static struct resource s3c_adc_resource[] = {
- [0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_ADC),
- [2] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
-struct platform_device s3c_device_adc = {
- .name = "exynos-adc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_adc_resource),
- .resource = s3c_adc_resource,
-};
-#endif /* CONFIG_SAMSUNG_DEV_ADC */
-
-/* Camif Controller */
-
-#ifdef CONFIG_CPU_S3C2440
-static struct resource s3c_camif_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
- [1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C),
- [2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P),
-};
-
-struct platform_device s3c_device_camif = {
- .name = "s3c2440-camif",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_camif_resource),
- .resource = s3c_camif_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-#endif /* CONFIG_CPU_S3C2440 */
-
/* FB */
#ifdef CONFIG_S3C_DEV_FB
@@ -168,22 +77,6 @@ void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
}
#endif /* CONFIG_S3C_DEV_FB */
-/* HWMON */
-
-#ifdef CONFIG_S3C_DEV_HWMON
-struct platform_device s3c_device_hwmon = {
- .name = "s3c-hwmon",
- .id = -1,
- .dev.parent = &s3c_device_adc.dev,
-};
-
-void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd)
-{
- s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata),
- &s3c_device_hwmon);
-}
-#endif /* CONFIG_S3C_DEV_HWMON */
-
/* HSMMC */
#ifdef CONFIG_S3C_DEV_HSMMC
@@ -373,220 +266,6 @@ void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
}
#endif /* CONFIG_S3C_DEV_I2C1 */
-#ifdef CONFIG_S3C_DEV_I2C2
-static struct resource s3c_i2c2_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC2, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC2),
-};
-
-struct platform_device s3c_device_i2c2 = {
- .name = "s3c2410-i2c",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c_i2c2_resource),
- .resource = s3c_i2c2_resource,
-};
-
-void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 2;
- }
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c2);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c2_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C2 */
-
-#ifdef CONFIG_S3C_DEV_I2C3
-static struct resource s3c_i2c3_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC3, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC3),
-};
-
-struct platform_device s3c_device_i2c3 = {
- .name = "s3c2440-i2c",
- .id = 3,
- .num_resources = ARRAY_SIZE(s3c_i2c3_resource),
- .resource = s3c_i2c3_resource,
-};
-
-void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 3;
- }
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c3);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c3_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C3 */
-
-#ifdef CONFIG_S3C_DEV_I2C4
-static struct resource s3c_i2c4_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC4, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC4),
-};
-
-struct platform_device s3c_device_i2c4 = {
- .name = "s3c2440-i2c",
- .id = 4,
- .num_resources = ARRAY_SIZE(s3c_i2c4_resource),
- .resource = s3c_i2c4_resource,
-};
-
-void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 4;
- }
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c4);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c4_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C4 */
-
-#ifdef CONFIG_S3C_DEV_I2C5
-static struct resource s3c_i2c5_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC5, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC5),
-};
-
-struct platform_device s3c_device_i2c5 = {
- .name = "s3c2440-i2c",
- .id = 5,
- .num_resources = ARRAY_SIZE(s3c_i2c5_resource),
- .resource = s3c_i2c5_resource,
-};
-
-void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 5;
- }
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c5);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c5_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C5 */
-
-#ifdef CONFIG_S3C_DEV_I2C6
-static struct resource s3c_i2c6_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC6, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC6),
-};
-
-struct platform_device s3c_device_i2c6 = {
- .name = "s3c2440-i2c",
- .id = 6,
- .num_resources = ARRAY_SIZE(s3c_i2c6_resource),
- .resource = s3c_i2c6_resource,
-};
-
-void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 6;
- }
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c6);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c6_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C6 */
-
-#ifdef CONFIG_S3C_DEV_I2C7
-static struct resource s3c_i2c7_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_IIC7, SZ_4K),
- [1] = DEFINE_RES_IRQ(IRQ_IIC7),
-};
-
-struct platform_device s3c_device_i2c7 = {
- .name = "s3c2440-i2c",
- .id = 7,
- .num_resources = ARRAY_SIZE(s3c_i2c7_resource),
- .resource = s3c_i2c7_resource,
-};
-
-void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd) {
- pd = &default_i2c_data;
- pd->bus_num = 7;
- }
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c7);
-
- if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c7_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C7 */
-
-/* I2S */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_iis_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS),
-};
-
-struct platform_device s3c_device_iis = {
- .name = "s3c24xx-iis",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_iis_resource),
- .resource = s3c_iis_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* IDE CFCON */
-
-#ifdef CONFIG_SAMSUNG_DEV_IDE
-static struct resource s3c_cfcon_resource[] = {
- [0] = DEFINE_RES_MEM(SAMSUNG_PA_CFCON, SZ_16K),
- [1] = DEFINE_RES_IRQ(IRQ_CFCON),
-};
-
-struct platform_device s3c_device_cfcon = {
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_cfcon_resource),
- .resource = s3c_cfcon_resource,
-};
-
-void __init s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
-{
- s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
- &s3c_device_cfcon);
-}
-#endif /* CONFIG_SAMSUNG_DEV_IDE */
-
/* KEYPAD */
#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
@@ -613,175 +292,6 @@ void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
}
#endif /* CONFIG_SAMSUNG_DEV_KEYPAD */
-/* LCD Controller */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_lcd_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_LCD, S3C24XX_SZ_LCD),
- [1] = DEFINE_RES_IRQ(IRQ_LCD),
-};
-
-struct platform_device s3c_device_lcd = {
- .name = "s3c2410-lcd",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_lcd_resource),
- .resource = s3c_lcd_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-
-void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
-{
- struct s3c2410fb_mach_info *npd;
-
- npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
- if (npd) {
- npd->displays = kmemdup(pd->displays,
- sizeof(struct s3c2410fb_display) * npd->num_displays,
- GFP_KERNEL);
- if (!npd->displays)
- printk(KERN_ERR "no memory for LCD display data\n");
- } else {
- printk(KERN_ERR "no memory for LCD platform data\n");
- }
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* NAND */
-
-#ifdef CONFIG_S3C_DEV_NAND
-static struct resource s3c_nand_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_NAND, SZ_1M),
-};
-
-struct platform_device s3c_device_nand = {
- .name = "s3c2410-nand",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_nand_resource),
- .resource = s3c_nand_resource,
-};
-
-/*
- * s3c_nand_copy_set() - copy nand set data
- * @set: The new structure, directly copied from the old.
- *
- * Copy all the fields from the NAND set field from what is probably __initdata
- * to new kernel memory. The code returns 0 if the copy happened correctly or
- * an error code for the calling function to display.
- *
- * Note, we currently do not try and look to see if we've already copied the
- * data in a previous set.
- */
-static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
-{
- void *ptr;
- int size;
-
- size = sizeof(struct mtd_partition) * set->nr_partitions;
- if (size) {
- ptr = kmemdup(set->partitions, size, GFP_KERNEL);
- set->partitions = ptr;
-
- if (!ptr)
- return -ENOMEM;
- }
-
- if (set->nr_map && set->nr_chips) {
- size = sizeof(int) * set->nr_chips;
- ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
- set->nr_map = ptr;
-
- if (!ptr)
- return -ENOMEM;
- }
-
- return 0;
-}
-
-void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
-{
- struct s3c2410_platform_nand *npd;
- int size;
- int ret;
-
- /* note, if we get a failure in allocation, we simply drop out of the
- * function. If there is so little memory available at initialisation
- * time then there is little chance the system is going to run.
- */
-
- npd = s3c_set_platdata(nand, sizeof(*npd), &s3c_device_nand);
- if (!npd)
- return;
-
- /* now see if we need to copy any of the nand set data */
-
- size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
- if (size) {
- struct s3c2410_nand_set *from = npd->sets;
- struct s3c2410_nand_set *to;
- int i;
-
- to = kmemdup(from, size, GFP_KERNEL);
- npd->sets = to; /* set, even if we failed */
-
- if (!to) {
- printk(KERN_ERR "%s: no memory for sets\n", __func__);
- return;
- }
-
- for (i = 0; i < npd->nr_sets; i++) {
- ret = s3c_nand_copy_set(to);
- if (ret) {
- printk(KERN_ERR "%s: failed to copy set %d\n",
- __func__, i);
- return;
- }
- to++;
- }
- }
-}
-#endif /* CONFIG_S3C_DEV_NAND */
-
-/* ONENAND */
-
-#ifdef CONFIG_S3C_DEV_ONENAND
-static struct resource s3c_onenand_resources[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_ONENAND, SZ_1K),
- [1] = DEFINE_RES_MEM(S3C_PA_ONENAND_BUF, S3C_SZ_ONENAND_BUF),
- [2] = DEFINE_RES_IRQ(IRQ_ONENAND),
-};
-
-struct platform_device s3c_device_onenand = {
- .name = "samsung-onenand",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_onenand_resources),
- .resource = s3c_onenand_resources,
-};
-#endif /* CONFIG_S3C_DEV_ONENAND */
-
-#ifdef CONFIG_S3C64XX_DEV_ONENAND1
-static struct resource s3c64xx_onenand1_resources[] = {
- [0] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1, SZ_1K),
- [1] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1_BUF, S3C64XX_SZ_ONENAND1_BUF),
- [2] = DEFINE_RES_IRQ(IRQ_ONENAND1),
-};
-
-struct platform_device s3c64xx_device_onenand1 = {
- .name = "samsung-onenand",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c64xx_onenand1_resources),
- .resource = s3c64xx_onenand1_resources,
-};
-
-void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
-{
- s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
- &s3c64xx_device_onenand1);
-}
-#endif /* CONFIG_S3C64XX_DEV_ONENAND1 */
-
/* PWM Timer */
#ifdef CONFIG_SAMSUNG_DEV_PWM
@@ -802,162 +312,6 @@ void __init samsung_pwm_set_platdata(struct samsung_pwm_variant *pd)
}
#endif /* CONFIG_SAMSUNG_DEV_PWM */
-/* RTC */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_rtc_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_RTC, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_RTC),
- [2] = DEFINE_RES_IRQ(IRQ_TICK),
-};
-
-struct platform_device s3c_device_rtc = {
- .name = "s3c2410-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_rtc_resource),
- .resource = s3c_rtc_resource,
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#ifdef CONFIG_S3C_DEV_RTC
-static struct resource s3c_rtc_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_RTC, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_RTC_ALARM),
- [2] = DEFINE_RES_IRQ(IRQ_RTC_TIC),
-};
-
-struct platform_device s3c_device_rtc = {
- .name = "s3c64xx-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_rtc_resource),
- .resource = s3c_rtc_resource,
-};
-#endif /* CONFIG_S3C_DEV_RTC */
-
-/* SDI */
-
-#ifdef CONFIG_PLAT_S3C24XX
-void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd)
-{
- switch (power_mode) {
- case MMC_POWER_ON:
- case MMC_POWER_UP:
- /* Configure GPE5...GPE10 pins in SD mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
- break;
-
- case MMC_POWER_OFF:
- default:
- gpio_direction_output(S3C2410_GPE(5), 0);
- break;
- }
-}
-
-static struct resource s3c_sdi_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI),
- [1] = DEFINE_RES_IRQ(IRQ_SDI),
-};
-
-static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
- /* This is currently here to avoid a number of if (host->pdata)
- * checks. Any zero fields to ensure reasonable defaults are picked. */
- .no_wprotect = 1,
- .no_detect = 1,
- .set_power = s3c24xx_mci_def_set_power,
-};
-
-struct platform_device s3c_device_sdi = {
- .name = "s3c2410-sdi",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_sdi_resource),
- .resource = s3c_sdi_resource,
- .dev.platform_data = &s3cmci_def_pdata,
-};
-
-void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
-{
- s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
- &s3c_device_sdi);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* SPI */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_spi0_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_SPI, SZ_32),
- [1] = DEFINE_RES_IRQ(IRQ_SPI0),
-};
-
-struct platform_device s3c_device_spi0 = {
- .name = "s3c2410-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c_spi0_resource),
- .resource = s3c_spi0_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-
-static struct resource s3c_spi1_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_SPI1, SZ_32),
- [1] = DEFINE_RES_IRQ(IRQ_SPI1),
-};
-
-struct platform_device s3c_device_spi1 = {
- .name = "s3c2410-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c_spi1_resource),
- .resource = s3c_spi1_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* Touchscreen */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_ts_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
- [1] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
-struct platform_device s3c_device_ts = {
- .name = "s3c2410-ts",
- .id = -1,
- .dev.parent = &s3c_device_adc.dev,
- .num_resources = ARRAY_SIZE(s3c_ts_resource),
- .resource = s3c_ts_resource,
-};
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
-{
- s3c_set_platdata(hard_s3c2410ts_info,
- sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#ifdef CONFIG_SAMSUNG_DEV_TS
-static struct s3c2410_ts_mach_info default_ts_data __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
-void __init s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
-{
- if (!pd)
- pd = &default_ts_data;
-
- s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
- &s3c_device_adc);
-}
-#endif /* CONFIG_SAMSUNG_DEV_TS */
-
/* USB */
#ifdef CONFIG_S3C_DEV_USB_HOST
@@ -976,44 +330,8 @@ struct platform_device s3c_device_ohci = {
.coherent_dma_mask = DMA_BIT_MASK(32),
}
};
-
-/*
- * s3c_ohci_set_platdata - initialise OHCI device platform data
- * @info: The platform data.
- *
- * This call copies the @info passed in and sets the device .platform_data
- * field to that copy. The @info is copied so that the original can be marked
- * __initdata.
- */
-
-void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
-{
- s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info),
- &s3c_device_ohci);
-}
#endif /* CONFIG_S3C_DEV_USB_HOST */
-/* USB Device (Gadget) */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_usbgadget_resource[] = {
- [0] = DEFINE_RES_MEM(S3C24XX_PA_USBDEV, S3C24XX_SZ_USBDEV),
- [1] = DEFINE_RES_IRQ(IRQ_USBD),
-};
-
-struct platform_device s3c_device_usbgadget = {
- .name = "s3c2410-usbgadget",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_usbgadget_resource),
- .resource = s3c_usbgadget_resource,
-};
-
-void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
-{
- s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
/* USB HSOTG */
#ifdef CONFIG_S3C_DEV_USB_HSOTG
@@ -1046,49 +364,6 @@ void __init dwc2_hsotg_set_platdata(struct dwc2_hsotg_plat *pd)
}
#endif /* CONFIG_S3C_DEV_USB_HSOTG */
-/* USB High Spped 2.0 Device (Gadget) */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_hsudc_resource[] = {
- [0] = DEFINE_RES_MEM(S3C2416_PA_HSUDC, S3C2416_SZ_HSUDC),
- [1] = DEFINE_RES_IRQ(IRQ_USBD),
-};
-
-struct platform_device s3c_device_usb_hsudc = {
- .name = "s3c-hsudc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_hsudc_resource),
- .resource = s3c_hsudc_resource,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
-{
- s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
- pd->phy_init = s3c_hsudc_init_phy;
- pd->phy_uninit = s3c_hsudc_uninit_phy;
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* WDT */
-
-#ifdef CONFIG_S3C_DEV_WDT
-static struct resource s3c_wdt_resource[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_WDT, SZ_1K),
- [1] = DEFINE_RES_IRQ(IRQ_WDT),
-};
-
-struct platform_device s3c_device_wdt = {
- .name = "s3c2410-wdt",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_wdt_resource),
- .resource = s3c_wdt_resource,
-};
-#endif /* CONFIG_S3C_DEV_WDT */
-
#ifdef CONFIG_S3C64XX_DEV_SPI0
static struct resource s3c64xx_spi0_resource[] = {
[0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
diff --git a/arch/arm/mach-s3c/devs.h b/arch/arm/mach-s3c/devs.h
index 991b9b2006a1..21c00786c264 100644
--- a/arch/arm/mach-s3c/devs.h
+++ b/arch/arm/mach-s3c/devs.h
@@ -25,60 +25,23 @@ extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
extern struct platform_device *s3c24xx_uart_devs[];
extern struct platform_device *s3c24xx_uart_src[];
-extern struct platform_device s3c64xx_device_ac97;
extern struct platform_device s3c64xx_device_iis0;
extern struct platform_device s3c64xx_device_iis1;
-extern struct platform_device s3c64xx_device_iisv4;
-extern struct platform_device s3c64xx_device_onenand1;
-extern struct platform_device s3c64xx_device_pcm0;
-extern struct platform_device s3c64xx_device_pcm1;
extern struct platform_device s3c64xx_device_spi0;
-extern struct platform_device s3c_device_adc;
-extern struct platform_device s3c_device_cfcon;
extern struct platform_device s3c_device_fb;
-extern struct platform_device s3c_device_hwmon;
extern struct platform_device s3c_device_hsmmc0;
extern struct platform_device s3c_device_hsmmc1;
extern struct platform_device s3c_device_hsmmc2;
extern struct platform_device s3c_device_hsmmc3;
extern struct platform_device s3c_device_i2c0;
extern struct platform_device s3c_device_i2c1;
-extern struct platform_device s3c_device_i2c2;
-extern struct platform_device s3c_device_i2c3;
-extern struct platform_device s3c_device_i2c4;
-extern struct platform_device s3c_device_i2c5;
-extern struct platform_device s3c_device_i2c6;
-extern struct platform_device s3c_device_i2c7;
-extern struct platform_device s3c_device_iis;
-extern struct platform_device s3c_device_lcd;
-extern struct platform_device s3c_device_nand;
extern struct platform_device s3c_device_ohci;
-extern struct platform_device s3c_device_onenand;
-extern struct platform_device s3c_device_rtc;
-extern struct platform_device s3c_device_sdi;
-extern struct platform_device s3c_device_spi0;
-extern struct platform_device s3c_device_spi1;
-extern struct platform_device s3c_device_ts;
-extern struct platform_device s3c_device_timer[];
-extern struct platform_device s3c_device_usbgadget;
extern struct platform_device s3c_device_usb_hsotg;
-extern struct platform_device s3c_device_usb_hsudc;
-extern struct platform_device s3c_device_wdt;
-extern struct platform_device samsung_asoc_idma;
extern struct platform_device samsung_device_keypad;
extern struct platform_device samsung_device_pwm;
-/* s3c2440 specific devices */
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern struct platform_device s3c_device_camif;
-extern struct platform_device s3c_device_ac97;
-
-#endif
-
/**
* s3c_set_platdata() - helper for setting platform data
* @pd: The default platform data for this device.
diff --git a/arch/arm/mach-s3c/dma-s3c64xx.h b/arch/arm/mach-s3c/dma-s3c64xx.h
deleted file mode 100644
index 40ca8de21096..000000000000
diff --git a/arch/arm/mach-s3c/dma.h b/arch/arm/mach-s3c/dma.h
deleted file mode 100644
index 48057cb90070..000000000000
diff --git a/arch/arm/mach-s3c/gpio-cfg-helpers.h b/arch/arm/mach-s3c/gpio-cfg-helpers.h
index db0c56f5ca15..9d6f6319ae3e 100644
--- a/arch/arm/mach-s3c/gpio-cfg-helpers.h
+++ b/arch/arm/mach-s3c/gpio-cfg-helpers.h
@@ -26,134 +26,10 @@ static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip,
return (chip->config->set_config)(chip, off, config);
}
-static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip,
- unsigned int off)
-{
- return (chip->config->get_config)(chip, off);
-}
-
static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip,
unsigned int off, samsung_gpio_pull_t pull)
{
return (chip->config->set_pull)(chip, off, pull);
}
-static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip,
- unsigned int off)
-{
- return chip->config->get_pull(chip, off);
-}
-
-/* Pull-{up,down} resistor controls.
- *
- * S3C2410,S3C2440 = Pull-UP,
- * S3C2412,S3C2413 = Pull-Down
- * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
- * S3C2443 = Pull-Both [not same as S3C6400]
- */
-
-/**
- * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-up resistor.
- */
-extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none
- * @chip: The gpio chip that is being configured
- * @off: The offset for the GPIO being configured
- * @param: pull: The pull mode being requested
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-down resistor.
- */
-extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * samsung_gpio_setpull_upown() - Pull configuration for choice of up,
- * down or none
- *
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- * 00 = No pull resistor connected
- * 01 = Pull-up resistor connected
- * 10 = Pull-down resistor connected
- */
-extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * samsung_gpio_getpull_updown() - Get configuration for choice of up,
- * down or none
- *
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor
- * for the given GPIO in the same case as samsung_gpio_setpull_upown.
-*/
-extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
- unsigned int off);
-
-/**
- * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-up resistor for the
- * given GPIO in the same case as s3c24xx_gpio_setpull_1up.
-*/
-extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
- unsigned int off);
-
-/**
- * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-down resistor for the
- * given GPIO in the same case as s3c24xx_gpio_setpull_1down.
-*/
-extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
- unsigned int off);
-
-/**
- * s3c2443_gpio_setpull() - Pull configuration for s3c2443.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- * 00 = Pull-up resistor connected
- * 10 = Pull-down resistor connected
- * x1 = No pull up resistor
- */
-extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors
- * @chip: The gpio chip that the GPIO pin belongs to.
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as samsung_gpio_setpull_upown.
-*/
-extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
- unsigned int off);
-
#endif /* __PLAT_GPIO_CFG_HELPERS_H */
diff --git a/arch/arm/mach-s3c/gpio-cfg.h b/arch/arm/mach-s3c/gpio-cfg.h
index 469c220e092b..2dfb0561001e 100644
--- a/arch/arm/mach-s3c/gpio-cfg.h
+++ b/arch/arm/mach-s3c/gpio-cfg.h
@@ -94,17 +94,6 @@ struct samsung_gpio_cfg {
*/
extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
-/**
- * s3c_gpio_getcfg - Read the current function for a GPIO pin
- * @pin: The pin to read the configuration value for.
- *
- * Read the configuration state of the given @pin, returning a value that
- * could be passed back to s3c_gpio_cfgpin().
- *
- * @sa s3c_gpio_cfgpin
- */
-extern unsigned s3c_gpio_getcfg(unsigned int pin);
-
/**
* s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range
* @start: The pin number to start at
@@ -142,14 +131,6 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
*/
extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
-/**
- * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
- * @pin: The pin number to get the settings for
- *
- * Read the pull resistor value for the specified pin.
-*/
-extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
-
/* configure `all` aspects of an gpio */
/**
diff --git a/arch/arm/mach-s3c/gpio-core.h b/arch/arm/mach-s3c/gpio-core.h
index b361c8c0d669..6801c85fb9da 100644
--- a/arch/arm/mach-s3c/gpio-core.h
+++ b/arch/arm/mach-s3c/gpio-core.h
@@ -93,9 +93,6 @@ static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
*/
extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
-/* exported for core SoC support to change */
-extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
-
#ifdef CONFIG_S3C_GPIO_TRACK
extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
diff --git a/arch/arm/mach-s3c/gpio-samsung.c b/arch/arm/mach-s3c/gpio-samsung.c
index b7fc7c41309c..87daaa09e2c3 100644
--- a/arch/arm/mach-s3c/gpio-samsung.c
+++ b/arch/arm/mach-s3c/gpio-samsung.c
@@ -35,10 +35,9 @@
#include "gpio-core.h"
#include "gpio-cfg.h"
#include "gpio-cfg-helpers.h"
-#include "hardware-s3c24xx.h"
#include "pm.h"
-int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+static int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
unsigned int off, samsung_gpio_pull_t pull)
{
void __iomem *reg = chip->base + 0x08;
@@ -53,7 +52,7 @@ int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
return 0;
}
-samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+static samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
unsigned int off)
{
void __iomem *reg = chip->base + 0x08;
@@ -66,113 +65,6 @@ samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
return (__force samsung_gpio_pull_t)pup;
}
-int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull)
-{
- switch (pull) {
- case S3C_GPIO_PULL_NONE:
- pull = 0x01;
- break;
- case S3C_GPIO_PULL_UP:
- pull = 0x00;
- break;
- case S3C_GPIO_PULL_DOWN:
- pull = 0x02;
- break;
- }
- return samsung_gpio_setpull_updown(chip, off, pull);
-}
-
-samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
- unsigned int off)
-{
- samsung_gpio_pull_t pull;
-
- pull = samsung_gpio_getpull_updown(chip, off);
-
- switch (pull) {
- case 0x00:
- pull = S3C_GPIO_PULL_UP;
- break;
- case 0x01:
- case 0x03:
- pull = S3C_GPIO_PULL_NONE;
- break;
- case 0x02:
- pull = S3C_GPIO_PULL_DOWN;
- break;
- }
-
- return pull;
-}
-
-static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull,
- samsung_gpio_pull_t updown)
-{
- void __iomem *reg = chip->base + 0x08;
- u32 pup = __raw_readl(reg);
-
- if (pull == updown)
- pup &= ~(1 << off);
- else if (pull == S3C_GPIO_PULL_NONE)
- pup |= (1 << off);
- else
- return -EINVAL;
-
- __raw_writel(pup, reg);
- return 0;
-}
-
-static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip,
- unsigned int off,
- samsung_gpio_pull_t updown)
-{
- void __iomem *reg = chip->base + 0x08;
- u32 pup = __raw_readl(reg);
-
- pup &= (1 << off);
- return pup ? S3C_GPIO_PULL_NONE : updown;
-}
-
-samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
- unsigned int off)
-{
- return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
-}
-
-int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull)
-{
- return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
-}
-
-samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
- unsigned int off)
-{
- return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
-}
-
-int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
- unsigned int off, samsung_gpio_pull_t pull)
-{
- return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
-}
-
-/*
- * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has two bits of configuration per gpio, which have the following
- * functions:
- * 00 = input
- * 01 = output
- * 1x = special function
- */
-
static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
unsigned int off, unsigned int cfg)
{
@@ -289,70 +181,6 @@ static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
return S3C_GPIO_SPECIAL(con);
}
-#ifdef CONFIG_PLAT_S3C24XX
-/*
- * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has one bit of configuration for the gpio, where setting the bit
- * means the pin is in special function mode and unset means output.
- */
-
-static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip,
- unsigned int off, unsigned int cfg)
-{
- void __iomem *reg = chip->base;
- unsigned int shift = off;
- u32 con;
-
- if (samsung_gpio_is_cfg_special(cfg)) {
- cfg &= 0xf;
-
- /* Map output to 0, and SFN2 to 1 */
- cfg -= 1;
- if (cfg > 1)
- return -EINVAL;
-
- cfg <<= shift;
- }
-
- con = __raw_readl(reg);
- con &= ~(0x1 << shift);
- con |= cfg;
- __raw_writel(con, reg);
-
- return 0;
-}
-
-/*
- * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable
- * GPIO configuration value.
- *
- * @sa samsung_gpio_getcfg_2bit
- * @sa samsung_gpio_getcfg_4bit
- */
-
-static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
- unsigned int off)
-{
- u32 con;
-
- con = __raw_readl(chip->base);
- con >>= off;
- con &= 1;
- con++;
-
- return S3C_GPIO_SFN(con);
-}
-#endif
-
static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
int nr_chips)
{
@@ -368,18 +196,6 @@ static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
}
}
-struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
- .set_config = samsung_gpio_setcfg_2bit,
- .get_config = samsung_gpio_getcfg_2bit,
-};
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
- .set_config = s3c24xx_gpio_setcfg_abank,
- .get_config = s3c24xx_gpio_getcfg_abank,
-};
-#endif
-
static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
[0] = {
.cfg_eint = 0x0,
@@ -614,44 +430,6 @@ static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
return 0;
}
-#ifdef CONFIG_PLAT_S3C24XX
-/* The next set of routines are for the case of s3c24xx bank a */
-
-static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
-{
- return -EINVAL;
-}
-
-static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long flags;
- unsigned long dat;
- unsigned long con;
-
- local_irq_save(flags);
-
- con = __raw_readl(base + 0x00);
- dat = __raw_readl(base + 0x04);
-
- dat &= ~(1 << offset);
- if (value)
- dat |= 1 << offset;
-
- __raw_writel(dat, base + 0x04);
-
- con &= ~(1 << offset);
-
- __raw_writel(con, base + 0x00);
- __raw_writel(dat, base + 0x04);
-
- local_irq_restore(flags);
- return 0;
-}
-#endif
-
static void samsung_gpiolib_set(struct gpio_chip *chip,
unsigned offset, int value)
{
@@ -756,33 +534,6 @@ static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
s3c_gpiolib_track(chip);
}
-static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
- int nr_chips, void __iomem *base)
-{
- int i;
- struct gpio_chip *gc = &chip->chip;
-
- for (i = 0 ; i < nr_chips; i++, chip++) {
- /* skip banks not present on SoC */
- if (chip->chip.base >= S3C_GPIO_END)
- continue;
-
- if (!chip->config)
- chip->config = &s3c24xx_gpiocfg_default;
- if (!chip->pm)
- chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
- if ((base != NULL) && (chip->base == NULL))
- chip->base = base + ((i) * 0x10);
-
- if (!gc->direction_input)
- gc->direction_input = samsung_gpiolib_2bit_input;
- if (!gc->direction_output)
- gc->direction_output = samsung_gpiolib_2bit_output;
-
- samsung_gpiolib_add(chip);
- }
-}
-
static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip,
int nr_chips, void __iomem *base,
unsigned int offset)
@@ -865,24 +616,6 @@ int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
return samsung_chip->irq_base + offset;
}
-#ifdef CONFIG_PLAT_S3C24XX
-static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- if (offset < 4) {
- if (soc_is_s3c2412())
- return IRQ_EINT0_2412 + offset;
- else
- return IRQ_EINT0 + offset;
- }
-
- if (offset < 8)
- return IRQ_EINT4 + offset - 4;
-
- return -EINVAL;
-}
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
{
return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
@@ -892,109 +625,6 @@ static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin)
{
return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
}
-#endif
-
-struct samsung_gpio_chip s3c24xx_gpios[] = {
-#ifdef CONFIG_PLAT_S3C24XX
- {
- .config = &s3c24xx_gpiocfg_banka,
- .chip = {
- .base = S3C2410_GPA(0),
- .owner = THIS_MODULE,
- .label = "GPIOA",
- .ngpio = 27,
- .direction_input = s3c24xx_gpiolib_banka_input,
- .direction_output = s3c24xx_gpiolib_banka_output,
- },
- }, {
- .chip = {
- .base = S3C2410_GPB(0),
- .owner = THIS_MODULE,
- .label = "GPIOB",
- .ngpio = 11,
- },
- }, {
- .chip = {
- .base = S3C2410_GPC(0),
- .owner = THIS_MODULE,
- .label = "GPIOC",
- .ngpio = 16,
- },
- }, {
- .chip = {
- .base = S3C2410_GPD(0),
- .owner = THIS_MODULE,
- .label = "GPIOD",
- .ngpio = 16,
- },
- }, {
- .chip = {
- .base = S3C2410_GPE(0),
- .label = "GPIOE",
- .owner = THIS_MODULE,
- .ngpio = 16,
- },
- }, {
- .chip = {
- .base = S3C2410_GPF(0),
- .owner = THIS_MODULE,
- .label = "GPIOF",
- .ngpio = 8,
- .to_irq = s3c24xx_gpiolib_fbank_to_irq,
- },
- }, {
- .irq_base = IRQ_EINT8,
- .chip = {
- .base = S3C2410_GPG(0),
- .owner = THIS_MODULE,
- .label = "GPIOG",
- .ngpio = 16,
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .chip = {
- .base = S3C2410_GPH(0),
- .owner = THIS_MODULE,
- .label = "GPIOH",
- .ngpio = 15,
- },
- },
- /* GPIOS for the S3C2443 and later devices. */
- {
- .base = S3C2440_GPJCON,
- .chip = {
- .base = S3C2410_GPJ(0),
- .owner = THIS_MODULE,
- .label = "GPIOJ",
- .ngpio = 16,
- },
- }, {
- .base = S3C2443_GPKCON,
- .chip = {
- .base = S3C2410_GPK(0),
- .owner = THIS_MODULE,
- .label = "GPIOK",
- .ngpio = 16,
- },
- }, {
- .base = S3C2443_GPLCON,
- .chip = {
- .base = S3C2410_GPL(0),
- .owner = THIS_MODULE,
- .label = "GPIOL",
- .ngpio = 15,
- },
- }, {
- .base = S3C2443_GPMCON,
- .chip = {
- .base = S3C2410_GPM(0),
- .owner = THIS_MODULE,
- .label = "GPIOM",
- .ngpio = 2,
- },
- },
-#endif
-};
/*
* GPIO bank summary:
@@ -1023,7 +653,6 @@ struct samsung_gpio_chip s3c24xx_gpios[] = {
*/
static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
-#ifdef CONFIG_ARCH_S3C64XX
{
.chip = {
.base = S3C64XX_GPA(0),
@@ -1072,11 +701,9 @@ static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
.to_irq = s3c64xx_gpiolib_mbank_to_irq,
},
},
-#endif
};
static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
-#ifdef CONFIG_ARCH_S3C64XX
{
.base = S3C64XX_GPH_BASE + 0x4,
.chip = {
@@ -1102,11 +729,9 @@ static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
.to_irq = s3c64xx_gpiolib_lbank_to_irq,
},
},
-#endif
};
static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
-#ifdef CONFIG_ARCH_S3C64XX
{
.base = S3C64XX_GPF_BASE,
.config = &samsung_gpio_cfgs[6],
@@ -1161,7 +786,6 @@ static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
.to_irq = samsung_gpiolib_to_irq,
},
},
-#endif
};
/* TODO: cleanup soc_is_* */
@@ -1176,12 +800,7 @@ static __init int samsung_gpiolib_init(void)
if (of_have_populated_dt())
return 0;
- if (soc_is_s3c24xx()) {
- samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
- ARRAY_SIZE(samsung_gpio_cfgs));
- s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
- ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
- } else if (soc_is_s3c64xx()) {
+ if (soc_is_s3c64xx()) {
samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
ARRAY_SIZE(samsung_gpio_cfgs));
samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
@@ -1249,25 +868,6 @@ int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
}
EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
-unsigned s3c_gpio_getcfg(unsigned int pin)
-{
- struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
- unsigned long flags;
- unsigned ret = 0;
- int offset;
-
- if (chip) {
- offset = pin - chip->chip.base;
-
- samsung_gpio_lock(chip, flags);
- ret = samsung_gpio_do_getcfg(chip, offset);
- samsung_gpio_unlock(chip, flags);
- }
-
- return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_getcfg);
-
int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
{
struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
@@ -1286,40 +886,3 @@ int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
return ret;
}
EXPORT_SYMBOL(s3c_gpio_setpull);
-
-samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
-{
- struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
- unsigned long flags;
- int offset;
- u32 pup = 0;
-
- if (chip) {
- offset = pin - chip->chip.base;
-
- samsung_gpio_lock(chip, flags);
- pup = samsung_gpio_do_getpull(chip, offset);
- samsung_gpio_unlock(chip, flags);
- }
-
- return (__force samsung_gpio_pull_t)pup;
-}
-EXPORT_SYMBOL(s3c_gpio_getpull);
-
-#ifdef CONFIG_PLAT_S3C24XX
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
- unsigned long flags;
- unsigned long misccr;
-
- local_irq_save(flags);
- misccr = __raw_readl(S3C24XX_MISCCR);
- misccr &= ~clear;
- misccr ^= change;
- __raw_writel(misccr, S3C24XX_MISCCR);
- local_irq_restore(flags);
-
- return misccr;
-}
-EXPORT_SYMBOL(s3c2410_modify_misccr);
-#endif
diff --git a/arch/arm/mach-s3c/iic-core.h b/arch/arm/mach-s3c/iic-core.h
index c5cfd5af3874..6672691bd7b8 100644
--- a/arch/arm/mach-s3c/iic-core.h
+++ b/arch/arm/mach-s3c/iic-core.h
@@ -28,11 +28,4 @@ static inline void s3c_i2c1_setname(char *name)
#endif
}
-static inline void s3c_i2c2_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_I2C2
- s3c_device_i2c2.name = name;
-#endif
-}
-
#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/mach-s3c/init.c b/arch/arm/mach-s3c/init.c
index bf513616f55d..0ac079f23d51 100644
--- a/arch/arm/mach-s3c/init.c
+++ b/arch/arm/mach-s3c/init.c
@@ -63,29 +63,6 @@ void __init s3c_init_cpu(unsigned long idcode,
pr_err("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and linux-samsung-soc@vger.kernel.org if you still use it. Without such feedback, the platform will be removed after 2022.\n");
}
-/* s3c24xx_init_clocks
- *
- * Initialise the clock subsystem and associated information from the
- * given master crystal value.
- *
- * xtal = 0 -> use default PLL crystal value (normally 12MHz)
- * != 0 -> PLL crystal value in Hz
-*/
-
-void __init s3c24xx_init_clocks(int xtal)
-{
- if (xtal == 0)
- xtal = 12*1000*1000;
-
- if (cpu == NULL)
- panic("s3c24xx_init_clocks: no cpu setup?\n");
-
- if (cpu->init_clocks == NULL)
- panic("s3c24xx_init_clocks: cpu has no clock init\n");
- else
- (cpu->init_clocks)(xtal);
-}
-
/* uart management */
#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
static int nr_uarts __initdata = 0;
@@ -150,8 +127,7 @@ static int __init s3c_arch_init(void)
int ret;
/* init is only needed for ATAGS based platforms */
- if (!IS_ENABLED(CONFIG_ATAGS) ||
- (!soc_is_s3c24xx() && !soc_is_s3c64xx()))
+ if (!IS_ENABLED(CONFIG_ATAGS))
return 0;
// do the correct init for cpu
diff --git a/arch/arm/mach-s3c/map-s3c.h b/arch/arm/mach-s3c/map-s3c.h
index a18fdd3d6ae2..b5f5bdba384f 100644
--- a/arch/arm/mach-s3c/map-s3c.h
+++ b/arch/arm/mach-s3c/map-s3c.h
@@ -11,20 +11,6 @@
#include "map.h"
-#define S3C24XX_VA_IRQ S3C_VA_IRQ
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C24XX_VA_UART S3C_VA_UART
-
-#define S3C24XX_VA_TIMER S3C_VA_TIMER
-#define S3C24XX_VA_CLKPWR S3C_VA_SYS
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-
-#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
-#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000)
-
-#define S3C2410_PA_UART (0x50000000)
-#define S3C24XX_PA_UART S3C2410_PA_UART
-
/*
* GPIO ports
*
@@ -35,11 +21,6 @@
* 0xFA800000, which is not in the way of any current mapping
* by the base system.
*/
-
-#define S3C2410_PA_GPIO (0x56000000)
-#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
-
-#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
@@ -47,24 +28,6 @@
#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
-#define S3C2410_ADDR(x) S3C_ADDR(x)
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
#include "map-s5p.h"
#endif /* __ASM_PLAT_MAP_S3C_H */
diff --git a/arch/arm/mach-s3c/onenand-core-s3c64xx.h b/arch/arm/mach-s3c/onenand-core-s3c64xx.h
deleted file mode 100644
index e2dfdd1fec93..000000000000
diff --git a/arch/arm/mach-s3c/otom.h b/arch/arm/mach-s3c/otom.h
deleted file mode 100644
index c800f67d03d4..000000000000
diff --git a/arch/arm/mach-s3c/pm-core-s3c64xx.h b/arch/arm/mach-s3c/pm-core-s3c64xx.h
index 06f564e5cf63..24933c4ea1a2 100644
--- a/arch/arm/mach-s3c/pm-core-s3c64xx.h
+++ b/arch/arm/mach-s3c/pm-core-s3c64xx.h
@@ -20,23 +20,6 @@
static inline void s3c_pm_debug_init_uart(void)
{
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
- u32 tmp = __raw_readl(S3C_PCLK_GATE);
-
- /* As a note, since the S3C64XX UARTs generally have multiple
- * clock sources, we simply enable PCLK at the moment and hope
- * that the resume settings for the UART are suitable for the
- * use with PCLK.
- */
-
- tmp |= S3C_CLKCON_PCLK_UART0;
- tmp |= S3C_CLKCON_PCLK_UART1;
- tmp |= S3C_CLKCON_PCLK_UART2;
- tmp |= S3C_CLKCON_PCLK_UART3;
-
- __raw_writel(tmp, S3C_PCLK_GATE);
- udelay(10);
-#endif
}
static inline void s3c_pm_arch_prepare_irqs(void)
diff --git a/arch/arm/mach-s3c/pm-s3c64xx.c b/arch/arm/mach-s3c/pm-s3c64xx.c
index 7bc7417fd803..284d5f462513 100644
--- a/arch/arm/mach-s3c/pm-s3c64xx.c
+++ b/arch/arm/mach-s3c/pm-s3c64xx.c
@@ -173,23 +173,6 @@ static struct s3c64xx_pm_domain *s3c64xx_pm_domains[] = {
&s3c64xx_pm_f,
};
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-void s3c_pm_debug_smdkled(u32 set, u32 clear)
-{
- unsigned long flags;
- int i;
-
- local_irq_save(flags);
- for (i = 0; i < 4; i++) {
- if (clear & (1 << i))
- gpio_set_value(S3C64XX_GPN(12 + i), 0);
- if (set & (1 << i))
- gpio_set_value(S3C64XX_GPN(12 + i), 1);
- }
- local_irq_restore(flags);
-}
-#endif
-
#ifdef CONFIG_PM_SLEEP
static struct sleep_save core_save[] = {
SAVE_ITEM(S3C64XX_MEM0DRVCON),
@@ -224,8 +207,6 @@ void s3c_pm_restore_core(void)
{
__raw_writel(0, S3C64XX_EINT_MASK);
- s3c_pm_debug_smdkled(1 << 2, 0);
-
s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
}
@@ -258,9 +239,6 @@ static int s3c64xx_cpu_suspend(unsigned long arg)
__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
S3C64XX_WAKEUP_STAT);
- /* set the LED state to 0110 over sleep */
- s3c_pm_debug_smdkled(3 << 1, 0xf);
-
/* issue the standby signal into the pm unit. Note, we
* issue a write-buffer drain just in case */
@@ -305,56 +283,6 @@ static void s3c64xx_pm_prepare(void)
__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
}
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
-{
- u32 ucon;
- u32 ucon_clk
- u32 save_clk;
- u32 new_ucon;
- u32 delta;
-
- if (!soc_is_s3c64xx())
- return;
-
- ucon = __raw_readl(regs + S3C2410_UCON);
- ucon_clk = ucon & S3C6400_UCON_CLKMASK;
- sav_clk = save->ucon & S3C6400_UCON_CLKMASK;
-
- /* S3C64XX UART blocks only support level interrupts, so ensure that
- * when we restore unused UART blocks we force the level interrupt
- * settings. */
- save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
-
- /* We have a constraint on changing the clock type of the UART
- * between UCLKx and PCLK, so ensure that when we restore UCON
- * that the CLK field is correctly modified if the bootloader
- * has changed anything.
- */
- if (ucon_clk != save_clk) {
- new_ucon = save->ucon;
- delta = ucon_clk ^ save_clk;
-
- /* change from UCLKx => wrong PCLK,
- * either UCLK can be tested for by a bit-test
- * with UCLK0 */
- if (ucon_clk & S3C6400_UCON_UCLK0 &&
- !(save_clk & S3C6400_UCON_UCLK0) &&
- delta & S3C6400_UCON_PCLK2) {
- new_ucon &= ~S3C6400_UCON_UCLK0;
- } else if (delta == S3C6400_UCON_PCLK2) {
- /* as an precaution, don't change from
- * PCLK2 => PCLK or vice-versa */
- new_ucon ^= S3C6400_UCON_PCLK2;
- }
-
- S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
- ucon, new_ucon, save->ucon);
- save->ucon = new_ucon;
- }
-}
-#endif
-
int __init s3c64xx_pm_init(void)
{
int i;
@@ -384,17 +312,6 @@ static __init int s3c64xx_pm_initcall(void)
pm_cpu_prep = s3c64xx_pm_prepare;
pm_cpu_sleep = s3c64xx_cpu_suspend;
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
- gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
- gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
- gpio_request(S3C64XX_GPN(14), "DEBUG_LED2");
- gpio_request(S3C64XX_GPN(15), "DEBUG_LED3");
- gpio_direction_output(S3C64XX_GPN(12), 0);
- gpio_direction_output(S3C64XX_GPN(13), 0);
- gpio_direction_output(S3C64XX_GPN(14), 0);
- gpio_direction_output(S3C64XX_GPN(15), 0);
-#endif
-
return 0;
}
arch_initcall(s3c64xx_pm_initcall);
diff --git a/arch/arm/mach-s3c/pm.c b/arch/arm/mach-s3c/pm.c
index 06f019690d81..5698cbceaf7a 100644
--- a/arch/arm/mach-s3c/pm.c
+++ b/arch/arm/mach-s3c/pm.c
@@ -100,7 +100,7 @@ static int s3c_pm_enter(suspend_state_t state)
samsung_pm_saved_gpios();
}
- s3c_pm_save_uarts(soc_is_s3c2410());
+ s3c_pm_save_uarts(false);
s3c_pm_save_core();
/* set the irq configuration for wake */
@@ -137,7 +137,7 @@ static int s3c_pm_enter(suspend_state_t state)
/* restore the system state */
s3c_pm_restore_core();
- s3c_pm_restore_uarts(soc_is_s3c2410());
+ s3c_pm_restore_uarts(false);
if (!of_have_populated_dt()) {
samsung_pm_restore_gpios();
@@ -152,9 +152,6 @@ static int s3c_pm_enter(suspend_state_t state)
S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
- /* LEDs should now be 1110 */
- s3c_pm_debug_smdkled(1 << 1, 0);
-
s3c_pm_check_restore();
/* ok, let's return from sleep */
diff --git a/arch/arm/mach-s3c/pm.h b/arch/arm/mach-s3c/pm.h
index eed61e585457..35d266ab6958 100644
--- a/arch/arm/mach-s3c/pm.h
+++ b/arch/arm/mach-s3c/pm.h
@@ -64,18 +64,6 @@ extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
#define s3c_irqext_wake NULL
#endif
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-/**
- * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
- * @set: set bits for the state of the LEDs
- * @clear: clear bits for the state of the LEDs.
- */
-extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
-
-#else
-static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
-#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
-
/**
* s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
*
diff --git a/arch/arm/mach-s3c/regs-srom-s3c64xx.h b/arch/arm/mach-s3c/regs-srom-s3c64xx.h
deleted file mode 100644
index 2b37988bdf94..000000000000
diff --git a/arch/arm/mach-s3c/s3c6400.c b/arch/arm/mach-s3c/s3c6400.c
index 802f4fb7462d..d47f1d6067b4 100644
--- a/arch/arm/mach-s3c/s3c6400.c
+++ b/arch/arm/mach-s3c/s3c6400.c
@@ -36,7 +36,6 @@
#include "iic-core.h"
#include "s3c64xx.h"
-#include "onenand-core-s3c64xx.h"
void __init s3c6400_map_io(void)
{
@@ -48,11 +47,6 @@ void __init s3c6400_map_io(void)
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
-
- s3c_device_nand.name = "s3c6400-nand";
-
- s3c_onenand_setname("s3c6400-onenand");
- s3c64xx_onenand1_setname("s3c6400-onenand");
}
void __init s3c6400_init_irq(void)
diff --git a/arch/arm/mach-s3c/s3c6410.c b/arch/arm/mach-s3c/s3c6410.c
index dae17d5fd092..e79f18d0ca81 100644
--- a/arch/arm/mach-s3c/s3c6410.c
+++ b/arch/arm/mach-s3c/s3c6410.c
@@ -35,12 +35,9 @@
#include "cpu.h"
#include "devs.h"
#include "sdhci.h"
-#include "adc-core.h"
#include "iic-core.h"
-#include "ata-core-s3c64xx.h"
#include "s3c64xx.h"
-#include "onenand-core-s3c64xx.h"
void __init s3c6410_map_io(void)
{
@@ -52,12 +49,6 @@ void __init s3c6410_map_io(void)
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
-
- s3c_adc_setname("s3c64xx-adc");
- s3c_device_nand.name = "s3c6400-nand";
- s3c_onenand_setname("s3c6410-onenand");
- s3c64xx_onenand1_setname("s3c6410-onenand");
- s3c_cfcon_setname("s3c64xx-pata");
}
void __init s3c6410_init_irq(void)
diff --git a/arch/arm/mach-s3c/sdhci.h b/arch/arm/mach-s3c/sdhci.h
index 9f9d419e58d7..1010f94d4a18 100644
--- a/arch/arm/mach-s3c/sdhci.h
+++ b/arch/arm/mach-s3c/sdhci.h
@@ -48,35 +48,10 @@ extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
/* Helper function availability */
-extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-/* S3C2416 SDHCI setup */
-
-#ifdef CONFIG_S3C2416_SETUP_SDHCI
-static inline void s3c2416_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
-#endif /* CONFIG_S3C_DEV_HSMMC */
-}
-
-static inline void s3c2416_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-}
-
-#else
-static inline void s3c2416_default_sdhci0(void) { }
-static inline void s3c2416_default_sdhci1(void) { }
-
-#endif /* CONFIG_S3C2416_SETUP_SDHCI */
-
/* S3C64XX SDHCI setup */
#ifdef CONFIG_S3C64XX_SETUP_SDHCI
diff --git a/arch/arm/mach-s3c/setup-ide-s3c64xx.c b/arch/arm/mach-s3c/setup-ide-s3c64xx.c
deleted file mode 100644
index f11f2b02e49f..000000000000
diff --git a/arch/arm/mach-s3c/sleep-s3c64xx.S b/arch/arm/mach-s3c/sleep-s3c64xx.S
index 739e53fbce09..908aa76b1062 100644
--- a/arch/arm/mach-s3c/sleep-s3c64xx.S
+++ b/arch/arm/mach-s3c/sleep-s3c64xx.S
@@ -39,31 +39,4 @@
ENTRY(s3c_cpu_resume)
msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
ldr r2, =LL_UART /* for debug */
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-
-#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00)
-#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04)
-
-#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
- /* Initialise the GPIO state if we are debugging via the SMDK LEDs,
- * as the uboot version supplied resets these to inputs during the
- * resume checks.
- */
-
- ldr r3, =S3C64XX_PA_GPIO
- ldr r0, [ r3, #S3C64XX_GPNCON ]
- bic r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
- S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
- orr r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
- S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
- str r0, [ r3, #S3C64XX_GPNCON ]
-
- ldr r0, [ r3, #S3C64XX_GPNDAT ]
- bic r0, r0, #0xf << 12 @ GPN12..15
- orr r0, r0, #1 << 15 @ GPN15
- str r0, [ r3, #S3C64XX_GPNDAT ]
-#endif
b cpu_resume
diff --git a/include/linux/platform_data/media/s5p_hdmi.h b/include/linux/platform_data/media/s5p_hdmi.h
deleted file mode 100644
index 457321e917b9..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 06/21] ARM: s3c: remove s3c6400 support
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (4 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 05/21] ARM: s3c: simplify platform code Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:30 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 07/21] power: remove s3c adc battery driver Arnd Bergmann
` (16 subsequent siblings)
22 siblings, 1 reply; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Heiko Stuebner, Tomasz Figa, linux-samsung-soc
From: Arnd Bergmann <arnd@arndb.de>
No board file and no dts file references the s3c6400 now, it's only
s3c6410, so remove the final bits as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c/Makefile.s3c64xx | 1 -
arch/arm/mach-s3c/s3c6400.c | 84 ------------------------------
arch/arm/mach-s3c/s3c64xx.c | 8 ---
3 files changed, 93 deletions(-)
delete mode 100644 arch/arm/mach-s3c/s3c6400.c
diff --git a/arch/arm/mach-s3c/Makefile.s3c64xx b/arch/arm/mach-s3c/Makefile.s3c64xx
index 13cda2fe7b6c..61287ad2ea42 100644
--- a/arch/arm/mach-s3c/Makefile.s3c64xx
+++ b/arch/arm/mach-s3c/Makefile.s3c64xx
@@ -16,7 +16,6 @@ obj-$(CONFIG_PM_SLEEP) += irq-pm-s3c64xx.o
# Core
obj-y += s3c64xx.o
-obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
# DMA support
diff --git a/arch/arm/mach-s3c/s3c6400.c b/arch/arm/mach-s3c/s3c6400.c
deleted file mode 100644
index d47f1d6067b4..000000000000
diff --git a/arch/arm/mach-s3c/s3c64xx.c b/arch/arm/mach-s3c/s3c64xx.c
index 0a8116c108fe..ad13d7e13e5e 100644
--- a/arch/arm/mach-s3c/s3c64xx.c
+++ b/arch/arm/mach-s3c/s3c64xx.c
@@ -72,18 +72,10 @@ static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
/* table of supported CPUs */
-static const char name_s3c6400[] = "S3C6400";
static const char name_s3c6410[] = "S3C6410";
static struct cpu_table cpu_ids[] __initdata = {
{
- .idcode = S3C6400_CPU_ID,
- .idmask = S3C64XX_CPU_MASK,
- .map_io = s3c6400_map_io,
- .init_uarts = s3c64xx_init_uarts,
- .init = s3c6400_init,
- .name = name_s3c6400,
- }, {
.idcode = S3C6410_CPU_ID,
.idmask = S3C64XX_CPU_MASK,
.map_io = s3c6410_map_io,
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 07/21] power: remove s3c adc battery driver
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (5 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 06/21] ARM: s3c: remove s3c6400 support Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 7:28 ` Lee Jones
` (2 more replies)
2022-10-21 20:27 ` [PATCH 08/21] hwmon: remove s3c driver Arnd Bergmann
` (15 subsequent siblings)
22 siblings, 3 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Sebastian Reichel
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Rob Herring, Greg Kroah-Hartman, Mauro Carvalho Chehab,
Lukas Bulwahn, Joe Perches, Hans de Goede, Linus Walleij,
Luca Ceresoli, Lee Jones, linux-pm
From: Arnd Bergmann <arnd@arndb.de>
The s3c-adc driver is removed along with the s3c24xx platform,
so the battery driver is no longer needed either.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
MAINTAINERS | 7 -
drivers/power/supply/Kconfig | 6 -
drivers/power/supply/Makefile | 1 -
drivers/power/supply/s3c_adc_battery.c | 453 -------------------------
include/linux/s3c_adc_battery.h | 39 ---
5 files changed, 506 deletions(-)
delete mode 100644 drivers/power/supply/s3c_adc_battery.c
delete mode 100644 include/linux/s3c_adc_battery.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 071d64e2a7ca..2caf42b0328a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17920,13 +17920,6 @@ S: Supported
W: http://www.ibm.com/developerworks/linux/linux390/
F: drivers/s390/scsi/zfcp_*
-S3C ADC BATTERY DRIVER
-M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-L: linux-samsung-soc@vger.kernel.org
-S: Odd Fixes
-F: drivers/power/supply/s3c_adc_battery.c
-F: include/linux/s3c_adc_battery.h
-
S3C24XX SD/MMC Driver
M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 568b3ede993a..e2f8dfcdd2a9 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -406,12 +406,6 @@ config BATTERY_MAX1721X
Say Y here to enable support for the MAX17211/MAX17215 standalone
battery gas-gauge.
-config BATTERY_S3C_ADC
- tristate "Battery driver for Samsung ADC based monitoring"
- depends on S3C_ADC
- help
- Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
-
config BATTERY_TWL4030_MADC
tristate "TWL4030 MADC battery driver"
depends on TWL4030_MADC
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index af43866b3980..8cb3c7f5c111 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -54,7 +54,6 @@ obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o
obj-$(CONFIG_BATTERY_MAX1721X) += max1721x_battery.o
obj-$(CONFIG_BATTERY_RT5033) += rt5033_battery.o
obj-$(CONFIG_CHARGER_RT9455) += rt9455_charger.o
-obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o
obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o
obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o
obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
diff --git a/drivers/power/supply/s3c_adc_battery.c b/drivers/power/supply/s3c_adc_battery.c
deleted file mode 100644
index 68d31a3bee48..000000000000
diff --git a/include/linux/s3c_adc_battery.h b/include/linux/s3c_adc_battery.h
deleted file mode 100644
index 57f982c375f8..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 08/21] hwmon: remove s3c driver
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (6 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 07/21] power: remove s3c adc battery driver Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-22 4:02 ` Guenter Roeck
2022-10-24 12:31 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 09/21] pata: remove samsung_cf driver Arnd Bergmann
` (14 subsequent siblings)
22 siblings, 2 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Jean Delvare, Guenter Roeck
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann, linux-hwmon
From: Arnd Bergmann <arnd@arndb.de>
The s3c adc driver was removed along with the s3c24xx platform, so the
hwmon driver is orphaned and can be removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/hwmon/Kconfig | 17 --
drivers/hwmon/Makefile | 1 -
drivers/hwmon/s3c-hwmon.c | 379 --------------------------------------
3 files changed, 397 deletions(-)
delete mode 100644 drivers/hwmon/s3c-hwmon.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 7ac3daaf59ce..c98a068b5be2 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1729,23 +1729,6 @@ config SENSORS_SHTC1
This driver can also be built as a module. If so, the module
will be called shtc1.
-config SENSORS_S3C
- tristate "Samsung built-in ADC"
- depends on S3C_ADC
- help
- If you say yes here you get support for the on-board ADCs of
- the Samsung S3C24XX, S3C64XX and other series of SoC
-
- This driver can also be built as a module. If so, the module
- will be called s3c-hwmon.
-
-config SENSORS_S3C_RAW
- bool "Include raw channel attributes in sysfs"
- depends on SENSORS_S3C
- help
- Say Y here if you want to include raw copies of all the ADC
- channels in sysfs.
-
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
depends on PCI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 11d076cad8a2..b5a401ce3285 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -173,7 +173,6 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o
obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o
obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o
-obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o
obj-$(CONFIG_SENSORS_SBTSI) += sbtsi_temp.o
obj-$(CONFIG_SENSORS_SBRMI) += sbrmi.o
obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
deleted file mode 100644
index 70ae665db477..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 09/21] pata: remove samsung_cf driver
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (7 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 08/21] hwmon: remove s3c driver Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-23 14:35 ` Sergey Shtylyov
` (2 more replies)
2022-10-21 20:27 ` [PATCH 10/21] mmc: remove s3cmci driver Arnd Bergmann
` (13 subsequent siblings)
22 siblings, 3 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Damien Le Moal
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Sergey Shtylyov, Hannes Reinecke, linux-ide
From: Arnd Bergmann <arnd@arndb.de>
This device was only used by the smdk6410 board file that is now
gone, so the driver can be removed as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/ata/Kconfig | 10 -
drivers/ata/Makefile | 1 -
drivers/ata/pata_samsung_cf.c | 662 -------------------
include/linux/platform_data/ata-samsung_cf.h | 31 -
4 files changed, 704 deletions(-)
delete mode 100644 drivers/ata/pata_samsung_cf.c
delete mode 100644 include/linux/platform_data/ata-samsung_cf.h
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 6b446cfc3455..3b8cb7a29efd 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -1136,16 +1136,6 @@ config PATA_RZ1000
If unsure, say N.
-config PATA_SAMSUNG_CF
- tristate "Samsung SoC PATA support"
- depends on SAMSUNG_DEV_IDE || COMPILE_TEST
- select PATA_TIMINGS
- help
- This option enables basic support for Samsung's S3C/S5P board
- PATA controllers via the new ATA layer
-
- If unsure, say N.
-
config PATA_WINBOND_VLB
tristate "Winbond W83759A VLB PATA support (Experimental)"
depends on ISA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 2cca9f500649..4ee5c0761d90 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -109,7 +109,6 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
-obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
obj-$(CONFIG_PATA_PXA) += pata_pxa.o
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
deleted file mode 100644
index aba1536ddd44..000000000000
diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h
deleted file mode 100644
index fccf969dc4da..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 10/21] mmc: remove s3cmci driver
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (8 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 09/21] pata: remove samsung_cf driver Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:35 ` Krzysztof Kozlowski
2022-10-24 16:52 ` Ulf Hansson
2022-10-21 20:27 ` [PATCH 11/21] clk: remove s3c24xx driver Arnd Bergmann
` (12 subsequent siblings)
22 siblings, 2 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Ulf Hansson
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-mmc, linux-samsung-soc
From: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform is gone, so this driver can be removed as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
MAINTAINERS | 6 -
drivers/mmc/host/Kconfig | 43 -
drivers/mmc/host/Makefile | 1 -
drivers/mmc/host/s3cmci.c | 1777 ----------------------
drivers/mmc/host/s3cmci.h | 75 -
include/linux/platform_data/mmc-s3cmci.h | 51 -
6 files changed, 1953 deletions(-)
delete mode 100644 drivers/mmc/host/s3cmci.c
delete mode 100644 drivers/mmc/host/s3cmci.h
delete mode 100644 include/linux/platform_data/mmc-s3cmci.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 2caf42b0328a..503ebd9800db 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17920,12 +17920,6 @@ S: Supported
W: http://www.ibm.com/developerworks/linux/linux390/
F: drivers/s390/scsi/zfcp_*
-S3C24XX SD/MMC Driver
-M: Ben Dooks <ben-linux@fluff.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Supported
-F: drivers/mmc/host/s3cmci.*
-
SAA6588 RDS RECEIVER DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
L: linux-media@vger.kernel.org
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 79d8ddf1f616..75e8c364243d 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -619,49 +619,6 @@ config MMC_SPI
If unsure, or if your system has no SPI master driver, say N.
-config MMC_S3C
- tristate "Samsung S3C SD/MMC Card Interface support"
- depends on ARCH_S3C24XX || COMPILE_TEST
- depends on S3C24XX_DMAC || COMPILE_TEST
- help
- This selects a driver for the MCI interface found in
- Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
- If you have a board based on one of those and a MMC/SD
- slot, say Y or M here.
-
- If unsure, say N.
-
-config MMC_S3C_HW_SDIO_IRQ
- bool "Hardware support for SDIO IRQ"
- depends on MMC_S3C
- help
- Enable the hardware support for SDIO interrupts instead of using
- the generic polling code.
-
-choice
- prompt "Samsung S3C SD/MMC transfer code"
- depends on MMC_S3C
-
-config MMC_S3C_PIO
- bool "Use PIO transfers only"
- help
- Use PIO to transfer data between memory and the hardware.
-
- PIO is slower than DMA as it requires CPU instructions to
- move the data. This has been the traditional default for
- the S3C MCI driver.
-
-config MMC_S3C_DMA
- bool "Use DMA transfers only"
- help
- Use DMA to transfer data between memory and the hardware.
-
- Currently, the DMA support in this driver seems to not be
- working properly and needs to be debugged before this
- option is useful.
-
-endchoice
-
config MMC_SDRICOH_CS
tristate "MMC/SD driver for Ricoh Bay1Controllers"
depends on PCI && PCMCIA
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 0baeb0b004f7..885e19e21e75 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -34,7 +34,6 @@ obj-$(CONFIG_MMC_MVSDIO) += mvsdio.o
obj-$(CONFIG_MMC_DAVINCI) += davinci_mmc.o
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
obj-$(CONFIG_MMC_SPI) += of_mmc_spi.o
-obj-$(CONFIG_MMC_S3C) += s3cmci.o
obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
obj-$(CONFIG_MMC_TMIO_CORE) += tmio_mmc_core.o
obj-$(CONFIG_MMC_SDHI) += renesas_sdhi_core.o
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
deleted file mode 100644
index 8d5929a32d34..000000000000
diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h
deleted file mode 100644
index 8b65d7ad9f97..000000000000
diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h
deleted file mode 100644
index bacb86db3112..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 11/21] clk: remove s3c24xx driver
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (9 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 10/21] mmc: remove s3cmci driver Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-22 11:50 ` Chanwoo Choi
` (2 more replies)
2022-10-21 20:27 ` [PATCH 12/21] leds: " Arnd Bergmann
` (11 subsequent siblings)
22 siblings, 3 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Sylwester Nawrocki,
Tomasz Figa, Chanwoo Choi, Michael Turquette, Stephen Boyd
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-samsung-soc, linux-clk
From: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform is gone, so the clk driver can be removed as
well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
MAINTAINERS | 1 -
drivers/clk/samsung/Kconfig | 32 --
drivers/clk/samsung/Makefile | 4 -
drivers/clk/samsung/clk-s3c2410-dclk.c | 440 ---------------------
drivers/clk/samsung/clk-s3c2410.c | 446 ----------------------
drivers/clk/samsung/clk-s3c2412.c | 254 ------------
drivers/clk/samsung/clk-s3c2443.c | 438 ---------------------
include/linux/platform_data/clk-s3c2410.h | 19 -
8 files changed, 1634 deletions(-)
delete mode 100644 drivers/clk/samsung/clk-s3c2410-dclk.c
delete mode 100644 drivers/clk/samsung/clk-s3c2410.c
delete mode 100644 drivers/clk/samsung/clk-s3c2412.c
delete mode 100644 drivers/clk/samsung/clk-s3c2443.c
delete mode 100644 include/linux/platform_data/clk-s3c2410.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 503ebd9800db..caf196041e3a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18078,7 +18078,6 @@ F: include/dt-bindings/clock/s3c*.h
F: include/dt-bindings/clock/s5p*.h
F: include/dt-bindings/clock/samsung,*.h
F: include/linux/clk/samsung.h
-F: include/linux/platform_data/clk-s3c2410.h
SAMSUNG SPI DRIVERS
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig
index 8e8245ab3fd1..c07bb50513bf 100644
--- a/drivers/clk/samsung/Kconfig
+++ b/drivers/clk/samsung/Kconfig
@@ -94,38 +94,6 @@ config EXYNOS_CLKOUT
status of the certains clocks from SoC, but it could also be tied to
other devices as an input clock.
-# For S3C24XX platforms, select following symbols:
-config S3C2410_COMMON_CLK
- bool "Samsung S3C2410 clock controller support" if COMPILE_TEST
- select COMMON_CLK_SAMSUNG
- help
- Support for the clock controller present on the Samsung
- S3C2410/S3C2440/S3C2442 SoCs. Choose Y here only if you build for
- this SoC.
-
-config S3C2410_COMMON_DCLK
- bool
- select COMMON_CLK_SAMSUNG
- select REGMAP_MMIO
- help
- Support for the dclk clock controller present on the Samsung
- S3C2410/S3C2412/S3C2440/S3C2443 SoCs. Choose Y here only if you build
- for this SoC.
-
-config S3C2412_COMMON_CLK
- bool "Samsung S3C2412 clock controller support" if COMPILE_TEST
- select COMMON_CLK_SAMSUNG
- help
- Support for the clock controller present on the Samsung S3C2412 SoCs.
- Choose Y here only if you build for this SoC.
-
-config S3C2443_COMMON_CLK
- bool "Samsung S3C2443 clock controller support" if COMPILE_TEST
- select COMMON_CLK_SAMSUNG
- help
- Support for the clock controller present on the Samsung
- S3C2416/S3C2443 SoCs. Choose Y here only if you build for this SoC.
-
config TESLA_FSD_COMMON_CLK
bool "Tesla FSD clock controller support" if COMPILE_TEST
depends on COMMON_CLK_SAMSUNG
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 239d9eead77f..ebbeacabe88f 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -21,10 +21,6 @@ obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos7.o
obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos7885.o
obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos850.o
obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynosautov9.o
-obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
-obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
-obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
-obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o
obj-$(CONFIG_S3C64XX_COMMON_CLK) += clk-s3c64xx.o
obj-$(CONFIG_S5PV210_COMMON_CLK) += clk-s5pv210.o clk-s5pv210-audss.o
obj-$(CONFIG_TESLA_FSD_COMMON_CLK) += clk-fsd.o
diff --git a/drivers/clk/samsung/clk-s3c2410-dclk.c b/drivers/clk/samsung/clk-s3c2410-dclk.c
deleted file mode 100644
index f5e0a6ba2d12..000000000000
diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c
deleted file mode 100644
index 3d152a46169b..000000000000
diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c
deleted file mode 100644
index 724ef642f048..000000000000
diff --git a/drivers/clk/samsung/clk-s3c2443.c b/drivers/clk/samsung/clk-s3c2443.c
deleted file mode 100644
index a827d63766d1..000000000000
diff --git a/include/linux/platform_data/clk-s3c2410.h b/include/linux/platform_data/clk-s3c2410.h
deleted file mode 100644
index 7eb1cfa5409b..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 12/21] leds: remove s3c24xx driver
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (10 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 11/21] clk: remove s3c24xx driver Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-22 10:04 ` Pavel Machek
2022-10-24 12:37 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 13/21] usb: gadget: remove s3c24xx drivers Arnd Bergmann
` (10 subsequent siblings)
22 siblings, 2 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Pavel Machek
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Andy Shevchenko, Sven Schwermer, linux-leds,
linux-samsung-soc
From: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform is gone, so the led driver can be
removed as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/leds/Kconfig | 8 ---
drivers/leds/Makefile | 1 -
drivers/leds/leds-s3c24xx.c | 83 ----------------------
include/linux/platform_data/leds-s3c24xx.h | 18 -----
4 files changed, 110 deletions(-)
delete mode 100644 drivers/leds/leds-s3c24xx.c
delete mode 100644 include/linux/platform_data/leds-s3c24xx.h
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 3642ed8a75b4..9dbce09eabac 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -244,14 +244,6 @@ config LEDS_MT6323
This option enables support for on-chip LED drivers found on
Mediatek MT6323 PMIC.
-config LEDS_S3C24XX
- tristate "LED Support for Samsung S3C24XX GPIO LEDs"
- depends on LEDS_CLASS
- depends on ARCH_S3C24XX || COMPILE_TEST
- help
- This option enables support for LEDs connected to GPIO lines
- on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
-
config LEDS_NET48XX
tristate "LED Support for Soekris net48xx series Error LED"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 0c1543a4a7a8..d30395d11fd8 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -73,7 +73,6 @@ obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o
obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
-obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o
obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
deleted file mode 100644
index 3c0c7aa63b8c..000000000000
diff --git a/include/linux/platform_data/leds-s3c24xx.h b/include/linux/platform_data/leds-s3c24xx.h
deleted file mode 100644
index 64f8d14876e0..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 13/21] usb: gadget: remove s3c24xx drivers
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (11 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 12/21] leds: " Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:39 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 14/21] dmaengine: remove s3c24xx driver Arnd Bergmann
` (9 subsequent siblings)
22 siblings, 1 reply; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Felipe Balbi, Greg Kroah-Hartman
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-usb, linux-samsung-soc
From: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform is gone, so both the udc and hsudc drivers
can be removed as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/usb/gadget/udc/Kconfig | 25 -
drivers/usb/gadget/udc/Makefile | 2 -
drivers/usb/gadget/udc/s3c-hsudc.c | 1319 -----------
drivers/usb/gadget/udc/s3c2410_udc.c | 1980 -----------------
drivers/usb/gadget/udc/s3c2410_udc.h | 99 -
drivers/usb/gadget/udc/s3c2410_udc_regs.h | 146 --
include/linux/platform_data/s3c-hsudc.h | 33 -
include/linux/platform_data/usb-s3c2410_udc.h | 33 -
8 files changed, 3637 deletions(-)
delete mode 100644 drivers/usb/gadget/udc/s3c-hsudc.c
delete mode 100644 drivers/usb/gadget/udc/s3c2410_udc.c
delete mode 100644 drivers/usb/gadget/udc/s3c2410_udc.h
delete mode 100644 drivers/usb/gadget/udc/s3c2410_udc_regs.h
delete mode 100644 include/linux/platform_data/s3c-hsudc.h
delete mode 100644 include/linux/platform_data/usb-s3c2410_udc.h
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 82fe0c72b496..a96163f70a8c 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -218,31 +218,6 @@ config USB_PXA27X
dynamically linked module called "pxa27x_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_S3C2410
- tristate "S3C2410 USB Device Controller"
- depends on ARCH_S3C24XX
- help
- Samsung's S3C2410 is an ARM-4 processor with an integrated
- full speed USB 1.1 device controller. It has 4 configurable
- endpoints, as well as endpoint zero (for control transfers).
-
- This driver has been tested on the S3C2410, S3C2412, and
- S3C2440 processors.
-
-config USB_S3C2410_DEBUG
- bool "S3C2410 udc debug messages"
- depends on USB_S3C2410
-
-config USB_S3C_HSUDC
- tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
- depends on ARCH_S3C24XX
- help
- Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
- integrated with dual speed USB 2.0 device controller. It has
- 8 endpoints, as well as endpoint zero.
-
- This driver has been tested on S3C2416 and S3C2450 processors.
-
config USB_MV_UDC
tristate "Marvell USB2.0 Device Controller"
depends on HAS_DMA
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
index 12f9e4c9eb0c..a05db5ea376c 100644
--- a/drivers/usb/gadget/udc/Makefile
+++ b/drivers/usb/gadget/udc/Makefile
@@ -17,7 +17,6 @@ obj-$(CONFIG_USB_PXA25X) += pxa25x_udc.o
obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o
obj-$(CONFIG_USB_GOKU) += goku_udc.o
obj-$(CONFIG_USB_OMAP) += omap_udc.o
-obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o
obj-$(CONFIG_USB_AT91) += at91_udc.o
obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
obj-$(CONFIG_USB_BCM63XX_UDC) += bcm63xx_udc.o
@@ -28,7 +27,6 @@ obj-$(CONFIG_USB_M66592) += m66592-udc.o
obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o
obj-$(CONFIG_USB_RENESAS_USB3) += renesas_usb3.o
obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o
-obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o
obj-$(CONFIG_USB_LPC32XX) += lpc32xx_udc.o
obj-$(CONFIG_USB_EG20T) += pch_udc.o
obj-$(CONFIG_USB_MV_UDC) += mv_udc.o
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
deleted file mode 100644
index 4b7eb7701470..000000000000
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
deleted file mode 100644
index 8c57b191e52b..000000000000
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h
deleted file mode 100644
index cdbf202e5ee8..000000000000
diff --git a/drivers/usb/gadget/udc/s3c2410_udc_regs.h b/drivers/usb/gadget/udc/s3c2410_udc_regs.h
deleted file mode 100644
index d8d2eeaca088..000000000000
diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h
deleted file mode 100644
index a170939832d5..000000000000
diff --git a/include/linux/platform_data/usb-s3c2410_udc.h b/include/linux/platform_data/usb-s3c2410_udc.h
deleted file mode 100644
index c0fbe1fe3426..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 14/21] dmaengine: remove s3c24xx driver
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (12 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 13/21] usb: gadget: remove s3c24xx drivers Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:40 ` Krzysztof Kozlowski
2022-11-04 14:14 ` Vinod Koul
2022-10-21 20:27 ` [PATCH 15/21] cpufreq: remove s3c24xx drivers Arnd Bergmann
` (8 subsequent siblings)
22 siblings, 2 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Vinod Koul
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, dmaengine, linux-samsung-soc
From: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform was removed and this driver is no longer
needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/dma/Kconfig | 12 -
drivers/dma/Makefile | 1 -
drivers/dma/s3c24xx-dma.c | 1428 ---------------------
include/linux/platform_data/dma-s3c24xx.h | 48 -
4 files changed, 1489 deletions(-)
delete mode 100644 drivers/dma/s3c24xx-dma.c
delete mode 100644 include/linux/platform_data/dma-s3c24xx.h
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index b73fc89ba877..ea81d825575f 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -609,18 +609,6 @@ config SPRD_DMA
help
Enable support for the on-chip DMA controller on Spreadtrum platform.
-config S3C24XX_DMAC
- bool "Samsung S3C24XX DMA support"
- depends on ARCH_S3C24XX || COMPILE_TEST
- select DMA_ENGINE
- select DMA_VIRTUAL_CHANNELS
- help
- Support for the Samsung S3C24XX DMA controller driver. The
- DMA controller is having multiple DMA channels which can be
- configured for different peripherals like audio, UART, SPI.
- The DMA controller can transfer data from memory to peripheral,
- periphal to memory, periphal to periphal and memory to memory.
-
config TXX9_DMAC
tristate "Toshiba TXx9 SoC DMA support"
depends on MACH_TX49XX
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 5b55ada052a7..a4fd1ce29510 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -70,7 +70,6 @@ obj-$(CONFIG_STM32_DMA) += stm32-dma.o
obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o
obj-$(CONFIG_STM32_MDMA) += stm32-mdma.o
obj-$(CONFIG_SPRD_DMA) += sprd-dma.o
-obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
obj-$(CONFIG_TEGRA186_GPC_DMA) += tegra186-gpc-dma.o
obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c
deleted file mode 100644
index a09eeb545f7d..000000000000
diff --git a/include/linux/platform_data/dma-s3c24xx.h b/include/linux/platform_data/dma-s3c24xx.h
deleted file mode 100644
index 96d02dbeea67..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 15/21] cpufreq: remove s3c24xx drivers
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (13 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 14/21] dmaengine: remove s3c24xx driver Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:40 ` Krzysztof Kozlowski
2022-10-25 5:19 ` Viresh Kumar
2022-10-21 20:27 ` [PATCH 16/21] fbdev: remove s3c2410 framebuffer Arnd Bergmann
` (7 subsequent siblings)
22 siblings, 2 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Rafael J. Wysocki, Viresh Kumar
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-pm, linux-samsung-soc
From: Arnd Bergmann <arnd@arndb.de>
All s3c24xx platforms were removed, so these five drivers are all
obsolete now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/cpufreq/Kconfig.arm | 78 ---
drivers/cpufreq/Makefile | 6 -
drivers/cpufreq/s3c2410-cpufreq.c | 155 -----
drivers/cpufreq/s3c2412-cpufreq.c | 240 -------
drivers/cpufreq/s3c2416-cpufreq.c | 492 --------------
drivers/cpufreq/s3c2440-cpufreq.c | 321 ---------
drivers/cpufreq/s3c24xx-cpufreq-debugfs.c | 163 -----
drivers/cpufreq/s3c24xx-cpufreq.c | 648 -------------------
include/linux/soc/samsung/s3c-cpufreq-core.h | 299 ---------
9 files changed, 2402 deletions(-)
delete mode 100644 drivers/cpufreq/s3c2410-cpufreq.c
delete mode 100644 drivers/cpufreq/s3c2412-cpufreq.c
delete mode 100644 drivers/cpufreq/s3c2416-cpufreq.c
delete mode 100644 drivers/cpufreq/s3c2440-cpufreq.c
delete mode 100644 drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
delete mode 100644 drivers/cpufreq/s3c24xx-cpufreq.c
delete mode 100644 include/linux/soc/samsung/s3c-cpufreq-core.h
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 8f7a1065f344..e3e0367305ec 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -180,84 +180,6 @@ config ARM_RASPBERRYPI_CPUFREQ
If in doubt, say N.
-config ARM_S3C_CPUFREQ
- bool
- help
- Internal configuration node for common cpufreq on Samsung SoC
-
-config ARM_S3C24XX_CPUFREQ
- bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
- depends on ARCH_S3C24XX
- select ARM_S3C_CPUFREQ
- help
- This enables the CPUfreq driver for the Samsung S3C24XX family
- of CPUs.
-
- For details, take a look at <file:Documentation/cpu-freq>.
-
- If in doubt, say N.
-
-config ARM_S3C24XX_CPUFREQ_DEBUG
- bool "Debug CPUfreq Samsung driver core"
- depends on ARM_S3C24XX_CPUFREQ
- help
- Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
-
-config ARM_S3C24XX_CPUFREQ_IODEBUG
- bool "Debug CPUfreq Samsung driver IO timing"
- depends on ARM_S3C24XX_CPUFREQ
- help
- Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
-
-config ARM_S3C24XX_CPUFREQ_DEBUGFS
- bool "Export debugfs for CPUFreq"
- depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS
- help
- Export status information via debugfs.
-
-config ARM_S3C2410_CPUFREQ
- bool
- depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
- help
- CPU Frequency scaling support for S3C2410
-
-config ARM_S3C2412_CPUFREQ
- bool
- depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412
- default y
- select S3C2412_IOTIMING
- help
- CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
-
-config ARM_S3C2416_CPUFREQ
- bool "S3C2416 CPU Frequency scaling support"
- depends on CPU_S3C2416
- help
- This adds the CPUFreq driver for the Samsung S3C2416 and
- S3C2450 SoC. The S3C2416 supports changing the rate of the
- armdiv clock source and also entering a so called dynamic
- voltage scaling mode in which it is possible to reduce the
- core voltage of the CPU.
-
- If in doubt, say N.
-
-config ARM_S3C2416_CPUFREQ_VCORESCALE
- bool "Allow voltage scaling for S3C2416 arm core"
- depends on ARM_S3C2416_CPUFREQ && REGULATOR
- help
- Enable CPU voltage scaling when entering the dvs mode.
- It uses information gathered through existing hardware and
- tests but not documented in any datasheet.
-
- If in doubt, say N.
-
-config ARM_S3C2440_CPUFREQ
- bool "S3C2440/S3C2442 CPU Frequency scaling support"
- depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
- default y
- help
- CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
config ARM_S3C64XX_CPUFREQ
bool "Samsung S3C64XX"
depends on CPU_S3C6410
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 8de99b213146..692c16e4ee55 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -70,13 +70,7 @@ obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o
obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o
obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o
-obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
-obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
-obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
-obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
-obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
-obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
obj-$(CONFIG_ARM_SCMI_CPUFREQ) += scmi-cpufreq.o
diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c
deleted file mode 100644
index 5dcfbf0bfb74..000000000000
diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c
deleted file mode 100644
index 5945945ead7c..000000000000
diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c
deleted file mode 100644
index 5c221bc90210..000000000000
diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c
deleted file mode 100644
index 2011fb9c03a4..000000000000
diff --git a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
deleted file mode 100644
index 93971dfe7c75..000000000000
diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
deleted file mode 100644
index 7380c32b238e..000000000000
diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h
deleted file mode 100644
index 3b278afb769b..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 16/21] fbdev: remove s3c2410 framebuffer
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (14 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 15/21] cpufreq: remove s3c24xx drivers Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:49 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 17/21] input: remove s3c24xx touchscreen driver Arnd Bergmann
` (6 subsequent siblings)
22 siblings, 1 reply; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Helge Deller
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-fbdev, dri-devel, linux-samsung-soc
From: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform was removed, so the framebuffer driver is no longer
needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/video/fbdev/Kconfig | 33 +-
drivers/video/fbdev/Makefile | 1 -
drivers/video/fbdev/s3c2410fb-regs-lcd.h | 143 ---
drivers/video/fbdev/s3c2410fb.c | 1142 ----------------------
drivers/video/fbdev/s3c2410fb.h | 48 -
include/linux/platform_data/fb-s3c2410.h | 99 --
6 files changed, 4 insertions(+), 1462 deletions(-)
delete mode 100644 drivers/video/fbdev/s3c2410fb-regs-lcd.h
delete mode 100644 drivers/video/fbdev/s3c2410fb.c
delete mode 100644 drivers/video/fbdev/s3c2410fb.h
delete mode 100644 include/linux/platform_data/fb-s3c2410.h
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index d1d74269075a..fa5bdbf82d59 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1822,19 +1822,17 @@ config FB_SH_MOBILE_LCDC
config FB_S3C
tristate "Samsung S3C framebuffer support"
depends on FB && HAVE_CLK && HAS_IOMEM
- depends on (CPU_S3C2416 || ARCH_S3C64XX) || COMPILE_TEST
+ depends on ARCH_S3C64XX || COMPILE_TEST
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
Frame buffer driver for the built-in FB controller in the Samsung
- SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
- and the S3C64XX series such as the S3C6400 and S3C6410.
+ SoC line such as the S3C6400 and S3C6410.
These chips all have the same basic framebuffer design with the
- actual capabilities depending on the chip. For instance the S3C6400
- and S3C6410 support 4 hardware windows whereas the S3C24XX series
- currently only have two.
+ actual capabilities depending on the chip. The S3C6400
+ and S3C6410 support 4 hardware windows.
Currently the support is only for the S3C6400 and S3C6410 SoCs.
@@ -1844,29 +1842,6 @@ config FB_S3C_DEBUG_REGWRITE
help
Show all register writes via pr_debug()
-config FB_S3C2410
- tristate "S3C2410 LCD framebuffer support"
- depends on FB && ARCH_S3C24XX
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Frame buffer driver for the built-in LCD controller in the Samsung
- S3C2410 processor.
-
- This driver is also available as a module ( = code which can be
- inserted and removed from the running kernel whenever you want). The
- module will be called s3c2410fb. If you want to compile it as a module,
- say M here and read <file:Documentation/kbuild/modules.rst>.
-
- If unsure, say N.
-config FB_S3C2410_DEBUG
- bool "S3C2410 lcd debug messages"
- depends on FB_S3C2410
- help
- Turn on debugging messages. Note that you can set/unset at run time
- through sysfs
-
config FB_SM501
tristate "Silicon Motion SM501 framebuffer support"
depends on FB && MFD_SM501
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 279cb0066aec..e6b0ae094b8b 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -98,7 +98,6 @@ obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C) += s3c-fb.o
-obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
diff --git a/drivers/video/fbdev/s3c2410fb-regs-lcd.h b/drivers/video/fbdev/s3c2410fb-regs-lcd.h
deleted file mode 100644
index 1e46f7a788e5..000000000000
diff --git a/drivers/video/fbdev/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
deleted file mode 100644
index d8ae5258de46..000000000000
diff --git a/drivers/video/fbdev/s3c2410fb.h b/drivers/video/fbdev/s3c2410fb.h
deleted file mode 100644
index cdd11e2f8859..000000000000
diff --git a/include/linux/platform_data/fb-s3c2410.h b/include/linux/platform_data/fb-s3c2410.h
deleted file mode 100644
index 10c11e6316d6..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 17/21] input: remove s3c24xx touchscreen driver
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (15 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 16/21] fbdev: remove s3c2410 framebuffer Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 11:57 ` Dmitry Torokhov
2022-10-24 12:50 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 18/21] pinctrl: remove s3c24xx driver Arnd Bergmann
` (5 subsequent siblings)
22 siblings, 2 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Dmitry Torokhov
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-input, linux-samsung-soc
From: Arnd Bergmann <arnd@arndb.de>
The s3c24xx SoC support and its adc driver was removed, so this driver
has no remaining users.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/input/touchscreen/Kconfig | 12 -
drivers/input/touchscreen/Makefile | 1 -
drivers/input/touchscreen/s3c2410_ts.c | 464 -------------------------
3 files changed, 477 deletions(-)
delete mode 100644 drivers/input/touchscreen/s3c2410_ts.c
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 4fde2b93b990..4d451640a223 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -462,18 +462,6 @@ config TOUCHSCREEN_IPROC
To compile this driver as a module, choose M here: the
module will be called bcm_iproc_tsc.
-config TOUCHSCREEN_S3C2410
- tristate "Samsung S3C2410/generic touchscreen input driver"
- depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
- depends on S3C_ADC
- help
- Say Y here if you have the s3c2410 touchscreen.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called s3c2410_ts.
-
config TOUCHSCREEN_S6SY761
tristate "Samsung S6SY761 Touchscreen driver"
depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 533a80ad054c..eb53d652c935 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -73,7 +73,6 @@ obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o
obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o
obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o
obj-$(CONFIG_TOUCHSCREEN_RM_TS) += raydium_i2c_ts.o
-obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
obj-$(CONFIG_TOUCHSCREEN_S6SY761) += s6sy761.o
obj-$(CONFIG_TOUCHSCREEN_SILEAD) += silead.o
obj-$(CONFIG_TOUCHSCREEN_SIS_I2C) += sis_i2c.o
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
deleted file mode 100644
index 2e70c0b79444..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 18/21] pinctrl: remove s3c24xx driver
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (16 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 17/21] input: remove s3c24xx touchscreen driver Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-21 21:25 ` Linus Walleij
2022-10-24 12:51 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 19/21] spi: " Arnd Bergmann
` (4 subsequent siblings)
22 siblings, 2 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Tomasz Figa,
Sylwester Nawrocki, Linus Walleij
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Andy Shevchenko, linux-samsung-soc, linux-gpio
From: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform was removed, so this driver has no
remaining users.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/pinctrl/samsung/Kconfig | 5 -
drivers/pinctrl/samsung/Makefile | 1 -
drivers/pinctrl/samsung/pinctrl-s3c24xx.c | 653 ----------------------
3 files changed, 659 deletions(-)
delete mode 100644 drivers/pinctrl/samsung/pinctrl-s3c24xx.c
diff --git a/drivers/pinctrl/samsung/Kconfig b/drivers/pinctrl/samsung/Kconfig
index 7b0576f71376..697ff7812d8e 100644
--- a/drivers/pinctrl/samsung/Kconfig
+++ b/drivers/pinctrl/samsung/Kconfig
@@ -23,11 +23,6 @@ config PINCTRL_EXYNOS_ARM64
bool "ARMv8-specific pinctrl driver for Samsung Exynos SoCs" if COMPILE_TEST
depends on PINCTRL_EXYNOS
-config PINCTRL_S3C24XX
- bool "Samsung S3C24XX SoC pinctrl driver"
- depends on ARCH_S3C24XX || (COMPILE_TEST && OF)
- select PINCTRL_SAMSUNG
-
config PINCTRL_S3C64XX
bool "Samsung S3C64XX SoC pinctrl driver"
depends on ARCH_S3C64XX || (COMPILE_TEST && OF)
diff --git a/drivers/pinctrl/samsung/Makefile b/drivers/pinctrl/samsung/Makefile
index ed951df6a112..4dd4a92ab6cc 100644
--- a/drivers/pinctrl/samsung/Makefile
+++ b/drivers/pinctrl/samsung/Makefile
@@ -5,5 +5,4 @@ obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o
obj-$(CONFIG_PINCTRL_EXYNOS) += pinctrl-exynos.o
obj-$(CONFIG_PINCTRL_EXYNOS_ARM) += pinctrl-exynos-arm.o
obj-$(CONFIG_PINCTRL_EXYNOS_ARM64) += pinctrl-exynos-arm64.o
-obj-$(CONFIG_PINCTRL_S3C24XX) += pinctrl-s3c24xx.o
obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o
diff --git a/drivers/pinctrl/samsung/pinctrl-s3c24xx.c b/drivers/pinctrl/samsung/pinctrl-s3c24xx.c
deleted file mode 100644
index 625cb1065eaf..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 19/21] spi: remove s3c24xx driver
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (17 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 18/21] pinctrl: remove s3c24xx driver Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:52 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 20/21] soc: s3c: remove pm-debug hack Arnd Bergmann
` (3 subsequent siblings)
22 siblings, 1 reply; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Mark Brown, Andi Shyti
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-spi, linux-samsung-soc
From: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform was removed,s o there are no remaining users
for its spi driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
MAINTAINERS | 1 -
drivers/spi/Kconfig | 18 -
drivers/spi/Makefile | 2 -
drivers/spi/spi-s3c24xx-regs.h | 41 ---
drivers/spi/spi-s3c24xx.c | 596 --------------------------------
include/linux/spi/s3c24xx-fiq.h | 33 --
include/linux/spi/s3c24xx.h | 20 --
7 files changed, 711 deletions(-)
delete mode 100644 drivers/spi/spi-s3c24xx-regs.h
delete mode 100644 drivers/spi/spi-s3c24xx.c
delete mode 100644 include/linux/spi/s3c24xx-fiq.h
delete mode 100644 include/linux/spi/s3c24xx.h
diff --git a/MAINTAINERS b/MAINTAINERS
index caf196041e3a..331301006f93 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18088,7 +18088,6 @@ S: Maintained
F: Documentation/devicetree/bindings/spi/samsung,spi*.yaml
F: drivers/spi/spi-s3c*
F: include/linux/platform_data/spi-s3c64xx.h
-F: include/linux/spi/s3c24xx-fiq.h
SAMSUNG SXGBE DRIVERS
M: Byungho An <bh74.an@samsung.com>
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index bf0dc704abbe..5992b5db8d76 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -818,24 +818,6 @@ config SPI_QCOM_GENI
This driver can also be built as a module. If so, the module
will be called spi-geni-qcom.
-config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C24XX
- select SPI_BITBANG
- help
- SPI driver for Samsung S3C24XX series ARM SoCs
-
-config SPI_S3C24XX_FIQ
- bool "S3C24XX driver with FIQ pseudo-DMA"
- depends on SPI_S3C24XX
- select FIQ
- help
- Enable FIQ support for the S3C24XX SPI driver to provide pseudo
- DMA by using the fast-interrupt request framework, This allows
- the driver to get DMA-like performance when there are either
- no free DMA channels, or when doing transfers that required both
- TX and RX data paths.
-
config SPI_S3C64XX
tristate "Samsung S3C64XX/Exynos SoC series type SPI"
depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST)
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index ae5ba0109d4b..4cd32f76402c 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -109,8 +109,6 @@ obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o
obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
-obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
-spi-s3c24xx-hw-y := spi-s3c24xx.o
obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o
obj-$(CONFIG_SPI_SH) += spi-sh.o
diff --git a/drivers/spi/spi-s3c24xx-regs.h b/drivers/spi/spi-s3c24xx-regs.h
deleted file mode 100644
index f51464ab5677..000000000000
diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c
deleted file mode 100644
index ef25b5e93900..000000000000
diff --git a/include/linux/spi/s3c24xx-fiq.h b/include/linux/spi/s3c24xx-fiq.h
deleted file mode 100644
index d2842ac1de27..000000000000
diff --git a/include/linux/spi/s3c24xx.h b/include/linux/spi/s3c24xx.h
deleted file mode 100644
index 9b8bb22d5b0c..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 20/21] soc: s3c: remove pm-debug hack
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (18 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 19/21] spi: " Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:52 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 21/21] ASoC: samsung: remove unused drivers Arnd Bergmann
` (2 subsequent siblings)
22 siblings, 1 reply; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Sam Protsenko, Chanho Park, linux-samsung-soc
From: Arnd Bergmann <arnd@arndb.de>
CONFIG_SAMSUNG_PM_DEBUG was only used on s3c24xx because of the
DEBUG_S3C24XX_UART dependency. Since s3c24xx is now gone, and nobody
ever noticed this option being missing from s3c64xx, it can be safely
removed as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/soc/samsung/Kconfig | 22 +--------
drivers/soc/samsung/Makefile | 1 -
drivers/soc/samsung/s3c-pm-debug.c | 79 ------------------------------
3 files changed, 1 insertion(+), 101 deletions(-)
delete mode 100644 drivers/soc/samsung/s3c-pm-debug.c
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index b4f538d7412f..7a8f291e7704 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -52,29 +52,9 @@ config EXYNOS_PM_DOMAINS
bool "Exynos PM domains" if COMPILE_TEST
depends on (ARCH_EXYNOS && PM_GENERIC_DOMAINS) || COMPILE_TEST
-config SAMSUNG_PM_DEBUG
- bool "Samsung PM Suspend debug"
- depends on PM && DEBUG_KERNEL
- depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
- depends on DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
- depends on DEBUG_LL && MMU
- help
- Say Y here if you want verbose debugging from the PM Suspend and
- Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
- for more information.
-
-config S3C_PM_DEBUG_LED_SMDK
- bool "SMDK LED suspend/resume debugging"
- depends on PM && (MACH_SMDK6410)
- help
- Say Y here to enable the use of the SMDK LEDs on the baseboard
- for debugging of the state of the suspend and resume process.
-
- Note, this currently only works for S3C64XX based SMDK boards.
-
config SAMSUNG_PM_CHECK
bool "S3C2410 PM Suspend Memory CRC"
- depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
+ depends on PM && (ARCH_S3C64XX || ARCH_S5PV210)
select CRC32
help
Enable the PM code's memory area checksum over sleep. This option
diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
index 9f59d1905ab0..d35270fc6b2b 100644
--- a/drivers/soc/samsung/Makefile
+++ b/drivers/soc/samsung/Makefile
@@ -14,4 +14,3 @@ obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o
obj-$(CONFIG_EXYNOS_REGULATOR_COUPLER) += exynos-regulator-coupler.o
obj-$(CONFIG_SAMSUNG_PM_CHECK) += s3c-pm-check.o
-obj-$(CONFIG_SAMSUNG_PM_DEBUG) += s3c-pm-debug.o
diff --git a/drivers/soc/samsung/s3c-pm-debug.c b/drivers/soc/samsung/s3c-pm-debug.c
deleted file mode 100644
index b5ce0e9a41e5..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* [PATCH 21/21] ASoC: samsung: remove unused drivers
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (19 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 20/21] soc: s3c: remove pm-debug hack Arnd Bergmann
@ 2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:53 ` Krzysztof Kozlowski
2022-10-22 15:18 ` [PATCH 00/21] ARM: s3c: clean out obsolete platforms Krzysztof Kozlowski
2022-10-24 13:00 ` Rob Herring
22 siblings, 1 reply; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-21 20:27 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Jaroslav Kysela,
Takashi Iwai, Sylwester Nawrocki, Liam Girdwood, Mark Brown
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Charles Keepax, linux-samsung-soc, alsa-devel
From: Arnd Bergmann <arnd@arndb.de>
The s3c24xx SoC platform was completely removed, as were most of the
s3c64xx based board files, leaving only the DT based machines as well
as the MACH_WLF_CRAGG_6410 machine. All other board specific ASoC
driver can can now be recycled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
.../linux/platform_data/asoc-s3c24xx_simtec.h | 30 -
include/sound/s3c24xx_uda134x.h | 14 -
sound/soc/samsung/Kconfig | 93 ---
sound/soc/samsung/Makefile | 26 -
sound/soc/samsung/h1940_uda1380.c | 224 ------
sound/soc/samsung/jive_wm8750.c | 143 ----
sound/soc/samsung/neo1973_wm8753.c | 360 ----------
sound/soc/samsung/regs-i2s-v2.h | 111 ---
sound/soc/samsung/regs-iis.h | 66 --
sound/soc/samsung/rx1950_uda1380.c | 245 -------
sound/soc/samsung/s3c-i2s-v2.c | 670 ------------------
sound/soc/samsung/s3c-i2s-v2.h | 108 ---
sound/soc/samsung/s3c2412-i2s.c | 251 -------
sound/soc/samsung/s3c2412-i2s.h | 22 -
sound/soc/samsung/s3c24xx-i2s.c | 463 ------------
sound/soc/samsung/s3c24xx-i2s.h | 31 -
sound/soc/samsung/s3c24xx_simtec.c | 372 ----------
sound/soc/samsung/s3c24xx_simtec.h | 18 -
sound/soc/samsung/s3c24xx_simtec_hermes.c | 112 ---
.../soc/samsung/s3c24xx_simtec_tlv320aic23.c | 100 ---
sound/soc/samsung/s3c24xx_uda134x.c | 257 -------
sound/soc/samsung/smartq_wm8987.c | 224 ------
sound/soc/samsung/smdk_wm8580.c | 211 ------
23 files changed, 4151 deletions(-)
delete mode 100644 include/linux/platform_data/asoc-s3c24xx_simtec.h
delete mode 100644 include/sound/s3c24xx_uda134x.h
delete mode 100644 sound/soc/samsung/h1940_uda1380.c
delete mode 100644 sound/soc/samsung/jive_wm8750.c
delete mode 100644 sound/soc/samsung/neo1973_wm8753.c
delete mode 100644 sound/soc/samsung/regs-i2s-v2.h
delete mode 100644 sound/soc/samsung/regs-iis.h
delete mode 100644 sound/soc/samsung/rx1950_uda1380.c
delete mode 100644 sound/soc/samsung/s3c-i2s-v2.c
delete mode 100644 sound/soc/samsung/s3c-i2s-v2.h
delete mode 100644 sound/soc/samsung/s3c2412-i2s.c
delete mode 100644 sound/soc/samsung/s3c2412-i2s.h
delete mode 100644 sound/soc/samsung/s3c24xx-i2s.c
delete mode 100644 sound/soc/samsung/s3c24xx-i2s.h
delete mode 100644 sound/soc/samsung/s3c24xx_simtec.c
delete mode 100644 sound/soc/samsung/s3c24xx_simtec.h
delete mode 100644 sound/soc/samsung/s3c24xx_simtec_hermes.c
delete mode 100644 sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
delete mode 100644 sound/soc/samsung/s3c24xx_uda134x.c
delete mode 100644 sound/soc/samsung/smartq_wm8987.c
delete mode 100644 sound/soc/samsung/smdk_wm8580.c
diff --git a/include/linux/platform_data/asoc-s3c24xx_simtec.h b/include/linux/platform_data/asoc-s3c24xx_simtec.h
deleted file mode 100644
index 1a7efc98d108..000000000000
diff --git a/include/sound/s3c24xx_uda134x.h b/include/sound/s3c24xx_uda134x.h
deleted file mode 100644
index 0232b80ff486..000000000000
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 2a61e620cd3b..93c2b1b08d0a 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -11,16 +11,6 @@ menuconfig SND_SOC_SAMSUNG
if SND_SOC_SAMSUNG
-config SND_S3C24XX_I2S
- tristate
-
-config SND_S3C_I2SV2_SOC
- tristate
-
-config SND_S3C2412_SOC_I2S
- tristate
- select SND_S3C_I2SV2_SOC
-
config SND_SAMSUNG_PCM
tristate "Samsung PCM interface support"
@@ -31,35 +21,6 @@ config SND_SAMSUNG_SPDIF
config SND_SAMSUNG_I2S
tristate "Samsung I2S interface support"
-config SND_SOC_SAMSUNG_NEO1973_WM8753
- tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)"
- depends on MACH_NEO1973_GTA02 || COMPILE_TEST
- depends on SND_SOC_I2C_AND_SPI
- select SND_S3C24XX_I2S
- select SND_SOC_WM8753
- select SND_SOC_BT_SCO
- help
- Say Y here to enable audio support for the Openmoko Neo1973
- Smartphones.
-
-config SND_SOC_SAMSUNG_JIVE_WM8750
- tristate "SoC I2S Audio support for Jive"
- depends on MACH_JIVE && I2C || COMPILE_TEST && ARM
- depends on SND_SOC_I2C_AND_SPI
- select SND_SOC_WM8750
- select SND_S3C2412_SOC_I2S
- help
- Say Y if you want to add support for SoC audio on the Jive.
-
-config SND_SOC_SAMSUNG_SMDK_WM8580
- tristate "SoC I2S Audio support for WM8580 on SMDK"
- depends on MACH_SMDK6410 || COMPILE_TEST
- depends on I2C
- select SND_SOC_WM8580
- select SND_SAMSUNG_I2S
- help
- Say Y if you want to add support for SoC audio on the SMDKs.
-
config SND_SOC_SAMSUNG_SMDK_WM8994
tristate "SoC I2S Audio support for WM8994 on SMDK"
depends on I2C=y
@@ -69,60 +30,6 @@ config SND_SOC_SAMSUNG_SMDK_WM8994
help
Say Y if you want to add support for SoC audio on the SMDKs.
-config SND_SOC_SAMSUNG_S3C24XX_UDA134X
- tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
- depends on ARCH_S3C24XX || COMPILE_TEST
- select SND_S3C24XX_I2S
- select SND_SOC_L3
- select SND_SOC_UDA134X
-
-config SND_SOC_SAMSUNG_SIMTEC
- tristate
- help
- Internal node for common S3C24XX/Simtec support.
-
-config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23
- tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
- depends on ARCH_S3C24XX || COMPILE_TEST
- depends on I2C
- select SND_S3C24XX_I2S
- select SND_SOC_TLV320AIC23_I2C
- select SND_SOC_SAMSUNG_SIMTEC
-
-config SND_SOC_SAMSUNG_SIMTEC_HERMES
- tristate "SoC I2S Audio support for Simtec Hermes board"
- depends on ARCH_S3C24XX || COMPILE_TEST
- depends on I2C
- select SND_S3C24XX_I2S
- select SND_SOC_TLV320AIC3X
- select SND_SOC_SAMSUNG_SIMTEC
-
-config SND_SOC_SAMSUNG_H1940_UDA1380
- tristate "Audio support for the HP iPAQ H1940"
- depends on ARCH_H1940 || COMPILE_TEST
- depends on I2C
- select SND_S3C24XX_I2S
- select SND_SOC_UDA1380
- help
- This driver provides audio support for HP iPAQ h1940 PDA.
-
-config SND_SOC_SAMSUNG_RX1950_UDA1380
- tristate "Audio support for the HP iPAQ RX1950"
- depends on MACH_RX1950 || COMPILE_TEST
- depends on I2C
- select SND_S3C24XX_I2S
- select SND_SOC_UDA1380
- help
- This driver provides audio support for HP iPAQ RX1950 PDA.
-
-config SND_SOC_SMARTQ
- tristate "SoC I2S Audio support for SmartQ board"
- depends on MACH_SMARTQ || COMPILE_TEST
- depends on GPIOLIB || COMPILE_TEST
- depends on I2C
- select SND_SAMSUNG_I2S
- select SND_SOC_WM8750
-
config SND_SOC_SAMSUNG_SMDK_SPDIF
tristate "SoC S/PDIF Audio support for SMDK"
select SND_SAMSUNG_SPDIF
diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile
index 398e843f388c..f5d327b90a4e 100644
--- a/sound/soc/samsung/Makefile
+++ b/sound/soc/samsung/Makefile
@@ -2,35 +2,19 @@
# S3c24XX Platform Support
snd-soc-s3c-dma-objs := dmaengine.o
snd-soc-idma-objs := idma.o
-snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
-snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o
-snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o
snd-soc-samsung-spdif-objs := spdif.o
snd-soc-pcm-objs := pcm.o
snd-soc-i2s-objs := i2s.o
obj-$(CONFIG_SND_SOC_SAMSUNG) += snd-soc-s3c-dma.o
-obj-$(CONFIG_SND_S3C24XX_I2S) += snd-soc-s3c24xx-i2s.o
-obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o
-obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o
obj-$(CONFIG_SND_SAMSUNG_SPDIF) += snd-soc-samsung-spdif.o
obj-$(CONFIG_SND_SAMSUNG_PCM) += snd-soc-pcm.o
obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-i2s.o
obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-idma.o
# S3C24XX Machine Support
-snd-soc-jive-wm8750-objs := jive_wm8750.o
-snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o
-snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
-snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o
-snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o
-snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o
-snd-soc-h1940-uda1380-objs := h1940_uda1380.o
-snd-soc-rx1950-uda1380-objs := rx1950_uda1380.o
-snd-soc-smdk-wm8580-objs := smdk_wm8580.o
snd-soc-smdk-wm8994-objs := smdk_wm8994.o
snd-soc-snow-objs := snow.o
-snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o
snd-soc-smdk-spdif-objs := smdk_spdif.o
snd-soc-smdk-wm8994pcm-objs := smdk_wm8994pcm.o
snd-soc-speyside-objs := speyside.o
@@ -44,18 +28,8 @@ snd-soc-tm2-wm5110-objs := tm2_wm5110.o
snd-soc-aries-wm8994-objs := aries_wm8994.o
snd-soc-midas-wm1811-objs := midas_wm1811.o
-obj-$(CONFIG_SND_SOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o
-obj-$(CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
-obj-$(CONFIG_SND_SOC_SAMSUNG_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
-obj-$(CONFIG_SND_SOC_SAMSUNG_SIMTEC) += snd-soc-s3c24xx-simtec.o
-obj-$(CONFIG_SND_SOC_SAMSUNG_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o
-obj-$(CONFIG_SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o
-obj-$(CONFIG_SND_SOC_SAMSUNG_H1940_UDA1380) += snd-soc-h1940-uda1380.o
-obj-$(CONFIG_SND_SOC_SAMSUNG_RX1950_UDA1380) += snd-soc-rx1950-uda1380.o
-obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_WM8580) += snd-soc-smdk-wm8580.o
obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994) += snd-soc-smdk-wm8994.o
obj-$(CONFIG_SND_SOC_SNOW) += snd-soc-snow.o
-obj-$(CONFIG_SND_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o
obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o
obj-$(CONFIG_SND_SOC_SMDK_WM8994_PCM) += snd-soc-smdk-wm8994pcm.o
obj-$(CONFIG_SND_SOC_SPEYSIDE) += snd-soc-speyside.o
diff --git a/sound/soc/samsung/h1940_uda1380.c b/sound/soc/samsung/h1940_uda1380.c
deleted file mode 100644
index fa45a54ab18f..000000000000
diff --git a/sound/soc/samsung/jive_wm8750.c b/sound/soc/samsung/jive_wm8750.c
deleted file mode 100644
index 40a85f539509..000000000000
diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
deleted file mode 100644
index e9f2334028bf..000000000000
diff --git a/sound/soc/samsung/regs-i2s-v2.h b/sound/soc/samsung/regs-i2s-v2.h
deleted file mode 100644
index 867984e75709..000000000000
diff --git a/sound/soc/samsung/regs-iis.h b/sound/soc/samsung/regs-iis.h
deleted file mode 100644
index 253e172ad3b6..000000000000
diff --git a/sound/soc/samsung/rx1950_uda1380.c b/sound/soc/samsung/rx1950_uda1380.c
deleted file mode 100644
index abf28321f7d7..000000000000
diff --git a/sound/soc/samsung/s3c-i2s-v2.c b/sound/soc/samsung/s3c-i2s-v2.c
deleted file mode 100644
index 2b221cb0ed03..000000000000
diff --git a/sound/soc/samsung/s3c-i2s-v2.h b/sound/soc/samsung/s3c-i2s-v2.h
deleted file mode 100644
index 8c6fc0d3d77e..000000000000
diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c
deleted file mode 100644
index 0579a352961c..000000000000
diff --git a/sound/soc/samsung/s3c2412-i2s.h b/sound/soc/samsung/s3c2412-i2s.h
deleted file mode 100644
index bff2a797cb08..000000000000
diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c
deleted file mode 100644
index 7b7bbe007acd..000000000000
diff --git a/sound/soc/samsung/s3c24xx-i2s.h b/sound/soc/samsung/s3c24xx-i2s.h
deleted file mode 100644
index e073e31855d0..000000000000
diff --git a/sound/soc/samsung/s3c24xx_simtec.c b/sound/soc/samsung/s3c24xx_simtec.c
deleted file mode 100644
index 0cc66774b85d..000000000000
diff --git a/sound/soc/samsung/s3c24xx_simtec.h b/sound/soc/samsung/s3c24xx_simtec.h
deleted file mode 100644
index 38d8384755cd..000000000000
diff --git a/sound/soc/samsung/s3c24xx_simtec_hermes.c b/sound/soc/samsung/s3c24xx_simtec_hermes.c
deleted file mode 100644
index ed0d1b8fa2d4..000000000000
diff --git a/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c b/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
deleted file mode 100644
index c03d52990267..000000000000
diff --git a/sound/soc/samsung/s3c24xx_uda134x.c b/sound/soc/samsung/s3c24xx_uda134x.c
deleted file mode 100644
index 6272070dcd92..000000000000
diff --git a/sound/soc/samsung/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c
deleted file mode 100644
index 29bf917242fe..000000000000
diff --git a/sound/soc/samsung/smdk_wm8580.c b/sound/soc/samsung/smdk_wm8580.c
deleted file mode 100644
index 78703d095a6f..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* Re: [PATCH 18/21] pinctrl: remove s3c24xx driver
2022-10-21 20:27 ` [PATCH 18/21] pinctrl: remove s3c24xx driver Arnd Bergmann
@ 2022-10-21 21:25 ` Linus Walleij
2022-10-24 12:51 ` Krzysztof Kozlowski
1 sibling, 0 replies; 82+ messages in thread
From: Linus Walleij @ 2022-10-21 21:25 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, Tomasz Figa,
Sylwester Nawrocki, linux-kernel, Ben Dooks, Simtec Linux Team,
Arnd Bergmann, Alim Akhtar, Andy Shevchenko, linux-samsung-soc,
linux-gpio
On Fri, Oct 21, 2022 at 10:51 PM Arnd Bergmann <arnd@kernel.org> wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform was removed, so this driver has no
> remaining users.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
2022-10-21 20:27 ` [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks Arnd Bergmann
@ 2022-10-21 22:33 ` Wolfram Sang
2022-10-22 11:24 ` Greg Kroah-Hartman
` (7 subsequent siblings)
8 siblings, 0 replies; 82+ messages in thread
From: Wolfram Sang @ 2022-10-21 22:33 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, linux-kernel, Ben Dooks,
Simtec Linux Team, Arnd Bergmann, Alim Akhtar, Daniel Lezcano,
Thomas Gleixner, Jonathan Cameron, Lars-Peter Clausen,
Sylwester Nawrocki, Mauro Carvalho Chehab, Ulf Hansson,
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Tomasz Figa, Linus Walleij, Alessandro Zummo, Alexandre Belloni,
Greg Kroah-Hartman, Jiri Slaby, Guenter Roeck, Chanwoo Choi,
Stephen Boyd, linux-samsung-soc, linux-i2c, linux-iio,
linux-media, linux-mmc, linux-mtd, linux-gpio, linux-rtc,
linux-serial, linux-usb, linux-watchdog, linux-clk
[-- Attachment #1.1: Type: text/plain, Size: 450 bytes --]
On Fri, Oct 21, 2022 at 10:27:35PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
> similar symbols that are no longer available with the platform gone,
> though the drivers themselves are still used on newer platforms,
> so remove these hacks.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 08/21] hwmon: remove s3c driver
2022-10-21 20:27 ` [PATCH 08/21] hwmon: remove s3c driver Arnd Bergmann
@ 2022-10-22 4:02 ` Guenter Roeck
2022-10-22 8:36 ` Arnd Bergmann
2022-10-24 12:31 ` Krzysztof Kozlowski
1 sibling, 1 reply; 82+ messages in thread
From: Guenter Roeck @ 2022-10-22 4:02 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Krzysztof Kozlowski, Jean Delvare
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann, linux-hwmon
On 10/21/22 13:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c adc driver was removed along with the s3c24xx platform, so the
> hwmon driver is orphaned and can be removed.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
I assume you plan to push the series together. If not, please let me know.
Guenter
> ---
> drivers/hwmon/Kconfig | 17 --
> drivers/hwmon/Makefile | 1 -
> drivers/hwmon/s3c-hwmon.c | 379 --------------------------------------
> 3 files changed, 397 deletions(-)
> delete mode 100644 drivers/hwmon/s3c-hwmon.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 7ac3daaf59ce..c98a068b5be2 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1729,23 +1729,6 @@ config SENSORS_SHTC1
> This driver can also be built as a module. If so, the module
> will be called shtc1.
>
> -config SENSORS_S3C
> - tristate "Samsung built-in ADC"
> - depends on S3C_ADC
> - help
> - If you say yes here you get support for the on-board ADCs of
> - the Samsung S3C24XX, S3C64XX and other series of SoC
> -
> - This driver can also be built as a module. If so, the module
> - will be called s3c-hwmon.
> -
> -config SENSORS_S3C_RAW
> - bool "Include raw channel attributes in sysfs"
> - depends on SENSORS_S3C
> - help
> - Say Y here if you want to include raw copies of all the ADC
> - channels in sysfs.
> -
> config SENSORS_SIS5595
> tristate "Silicon Integrated Systems Corp. SiS5595"
> depends on PCI
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 11d076cad8a2..b5a401ce3285 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -173,7 +173,6 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
> obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o
> obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o
> obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o
> -obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o
> obj-$(CONFIG_SENSORS_SBTSI) += sbtsi_temp.o
> obj-$(CONFIG_SENSORS_SBRMI) += sbrmi.o
> obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
> diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
> deleted file mode 100644
> index 70ae665db477..000000000000
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 08/21] hwmon: remove s3c driver
2022-10-22 4:02 ` Guenter Roeck
@ 2022-10-22 8:36 ` Arnd Bergmann
0 siblings, 0 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-22 8:36 UTC (permalink / raw)
To: Guenter Roeck, Arnd Bergmann, linux-arm-kernel,
Krzysztof Kozlowski, Jean Delvare
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, linux-hwmon
On Sat, Oct 22, 2022, at 06:02, Guenter Roeck wrote:
> On 10/21/22 13:27, Arnd Bergmann wrote:
>> From: Arnd Bergmann <arnd@arndb.de>
>>
>> The s3c adc driver was removed along with the s3c24xx platform, so the
>> hwmon driver is orphaned and can be removed.
>>
>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>
> Acked-by: Guenter Roeck <linux@roeck-us.net>
>
> I assume you plan to push the series together. If not, please let me know.
Yes. I plan to pick up all the patches from the series through the
soc tree that have not been NaK'd or applied to subsystem maintainer
trees.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 12/21] leds: remove s3c24xx driver
2022-10-21 20:27 ` [PATCH 12/21] leds: " Arnd Bergmann
@ 2022-10-22 10:04 ` Pavel Machek
2022-10-24 12:37 ` Krzysztof Kozlowski
1 sibling, 0 replies; 82+ messages in thread
From: Pavel Machek @ 2022-10-22 10:04 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, linux-kernel, Ben Dooks,
Simtec Linux Team, Arnd Bergmann, Alim Akhtar, Andy Shevchenko,
Sven Schwermer, linux-leds, linux-samsung-soc
[-- Attachment #1.1: Type: text/plain, Size: 348 bytes --]
Hi!
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform is gone, so the led driver can be
> removed as well.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
git am failed, but I guess this is not critical...
Best regards,
Pavel
--
People of Russia, stop Putin before his war on Ukraine escalates.
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
2022-10-21 20:27 ` [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks Arnd Bergmann
2022-10-21 22:33 ` Wolfram Sang
@ 2022-10-22 11:24 ` Greg Kroah-Hartman
2022-10-22 14:02 ` Linus Walleij
` (6 subsequent siblings)
8 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2022-10-22 11:24 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, linux-kernel, Ben Dooks,
Simtec Linux Team, Arnd Bergmann, Alim Akhtar, Daniel Lezcano,
Thomas Gleixner, Jonathan Cameron, Lars-Peter Clausen,
Sylwester Nawrocki, Mauro Carvalho Chehab, Ulf Hansson,
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Tomasz Figa, Linus Walleij, Alessandro Zummo, Alexandre Belloni,
Jiri Slaby, Guenter Roeck, Chanwoo Choi, Stephen Boyd,
linux-samsung-soc, linux-i2c, linux-iio, linux-media, linux-mmc,
linux-mtd, linux-gpio, linux-rtc, linux-serial, linux-usb,
linux-watchdog, linux-clk
On Fri, Oct 21, 2022 at 10:27:35PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
> similar symbols that are no longer available with the platform gone,
> though the drivers themselves are still used on newer platforms,
> so remove these hacks.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 11/21] clk: remove s3c24xx driver
2022-10-21 20:27 ` [PATCH 11/21] clk: remove s3c24xx driver Arnd Bergmann
@ 2022-10-22 11:50 ` Chanwoo Choi
2022-10-24 12:37 ` Krzysztof Kozlowski
2022-10-27 23:11 ` Stephen Boyd
2 siblings, 0 replies; 82+ messages in thread
From: Chanwoo Choi @ 2022-10-22 11:50 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Krzysztof Kozlowski,
Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi, Michael Turquette,
Stephen Boyd
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-samsung-soc, linux-clk
Hi Arnd,
On 22. 10. 22. 05:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform is gone, so the clk driver can be removed as
> well.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> MAINTAINERS | 1 -
> drivers/clk/samsung/Kconfig | 32 --
> drivers/clk/samsung/Makefile | 4 -
> drivers/clk/samsung/clk-s3c2410-dclk.c | 440 ---------------------
> drivers/clk/samsung/clk-s3c2410.c | 446 ----------------------
> drivers/clk/samsung/clk-s3c2412.c | 254 ------------
> drivers/clk/samsung/clk-s3c2443.c | 438 ---------------------
> include/linux/platform_data/clk-s3c2410.h | 19 -
> 8 files changed, 1634 deletions(-)
> delete mode 100644 drivers/clk/samsung/clk-s3c2410-dclk.c
> delete mode 100644 drivers/clk/samsung/clk-s3c2410.c
> delete mode 100644 drivers/clk/samsung/clk-s3c2412.c
> delete mode 100644 drivers/clk/samsung/clk-s3c2443.c
> delete mode 100644 include/linux/platform_data/clk-s3c2410.h
(snip)
I think that it should remove the pll code related to s3c24xx as following:
diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index fe383471c5f0..0daea2aadce4 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -1061,48 +1061,6 @@ static void samsung_s3c2410_upll_disable(struct clk_hw *hw)
samsung_s3c2410_pll_enable(hw, 7, false);
}
-static const struct clk_ops samsung_s3c2410_mpll_clk_min_ops = {
- .recalc_rate = samsung_s3c2410_pll_recalc_rate,
- .enable = samsung_s3c2410_mpll_enable,
- .disable = samsung_s3c2410_mpll_disable,
-};
-
-static const struct clk_ops samsung_s3c2410_upll_clk_min_ops = {
- .recalc_rate = samsung_s3c2410_pll_recalc_rate,
- .enable = samsung_s3c2410_upll_enable,
- .disable = samsung_s3c2410_upll_disable,
-};
-
-static const struct clk_ops samsung_s3c2440_mpll_clk_min_ops = {
- .recalc_rate = samsung_s3c2440_mpll_recalc_rate,
- .enable = samsung_s3c2410_mpll_enable,
- .disable = samsung_s3c2410_mpll_disable,
-};
-
-static const struct clk_ops samsung_s3c2410_mpll_clk_ops = {
- .recalc_rate = samsung_s3c2410_pll_recalc_rate,
- .enable = samsung_s3c2410_mpll_enable,
- .disable = samsung_s3c2410_mpll_disable,
- .round_rate = samsung_pll_round_rate,
- .set_rate = samsung_s3c2410_pll_set_rate,
-};
-
-static const struct clk_ops samsung_s3c2410_upll_clk_ops = {
- .recalc_rate = samsung_s3c2410_pll_recalc_rate,
- .enable = samsung_s3c2410_upll_enable,
- .disable = samsung_s3c2410_upll_disable,
- .round_rate = samsung_pll_round_rate,
- .set_rate = samsung_s3c2410_pll_set_rate,
-};
-
-static const struct clk_ops samsung_s3c2440_mpll_clk_ops = {
- .recalc_rate = samsung_s3c2440_mpll_recalc_rate,
- .enable = samsung_s3c2410_mpll_enable,
- .disable = samsung_s3c2410_mpll_disable,
- .round_rate = samsung_pll_round_rate,
- .set_rate = samsung_s3c2410_pll_set_rate,
-};
-
/*
* PLL2550x Clock Type
*/
@@ -1530,24 +1488,6 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
else
init.ops = &samsung_pll46xx_clk_ops;
break;
- case pll_s3c2410_mpll:
- if (!pll->rate_table)
- init.ops = &samsung_s3c2410_mpll_clk_min_ops;
- else
- init.ops = &samsung_s3c2410_mpll_clk_ops;
- break;
- case pll_s3c2410_upll:
- if (!pll->rate_table)
- init.ops = &samsung_s3c2410_upll_clk_min_ops;
- else
- init.ops = &samsung_s3c2410_upll_clk_ops;
- break;
- case pll_s3c2440_mpll:
- if (!pll->rate_table)
- init.ops = &samsung_s3c2440_mpll_clk_min_ops;
- else
- init.ops = &samsung_s3c2440_mpll_clk_ops;
- break;
case pll_2550x:
init.ops = &samsung_pll2550x_clk_ops;
break;
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index a9892c2d1f57..5d5a58d40e7e 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -25,9 +25,6 @@ enum samsung_pll_type {
pll_6552,
pll_6552_s3c2416,
pll_6553,
- pll_s3c2410_mpll,
- pll_s3c2410_upll,
- pll_s3c2440_mpll,
pll_2550x,
pll_2550xx,
pll_2650x,
@@ -56,24 +53,6 @@ enum samsung_pll_type {
.sdiv = (_s), \
}
-#define PLL_S3C2410_MPLL_RATE(_fin, _rate, _m, _p, _s) \
- { \
- .rate = PLL_VALID_RATE(_fin, _rate, \
- _m + 8, _p + 2, _s, 0, 16), \
- .mdiv = (_m), \
- .pdiv = (_p), \
- .sdiv = (_s), \
- }
-
-#define PLL_S3C2440_MPLL_RATE(_fin, _rate, _m, _p, _s) \
- { \
- .rate = PLL_VALID_RATE(_fin, _rate, \
- 2 * (_m + 8), _p + 2, _s, 0, 16), \
- .mdiv = (_m), \
- .pdiv = (_p), \
- .sdiv = (_s), \
- }
-
#define PLL_36XX_RATE(_fin, _rate, _m, _p, _s, _k) \
{ \
.rate = PLL_VALID_RATE(_fin, _rate, \
--
Best Regards,
Samsung Electronics
Chanwoo Choi
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 82+ messages in thread
* Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
2022-10-21 20:27 ` [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks Arnd Bergmann
2022-10-21 22:33 ` Wolfram Sang
2022-10-22 11:24 ` Greg Kroah-Hartman
@ 2022-10-22 14:02 ` Linus Walleij
2022-10-23 11:00 ` Jonathan Cameron
` (5 subsequent siblings)
8 siblings, 0 replies; 82+ messages in thread
From: Linus Walleij @ 2022-10-22 14:02 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, linux-kernel, Ben Dooks,
Simtec Linux Team, Arnd Bergmann, Alim Akhtar, Daniel Lezcano,
Thomas Gleixner, Jonathan Cameron, Lars-Peter Clausen,
Sylwester Nawrocki, Mauro Carvalho Chehab, Ulf Hansson,
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Tomasz Figa, Alessandro Zummo, Alexandre Belloni,
Greg Kroah-Hartman, Jiri Slaby, Guenter Roeck, Chanwoo Choi,
Stephen Boyd, linux-samsung-soc, linux-i2c, linux-iio,
linux-media, linux-mmc, linux-mtd, linux-gpio, linux-rtc,
linux-serial, linux-usb, linux-watchdog, linux-clk
On Fri, Oct 21, 2022 at 10:37 PM Arnd Bergmann <arnd@kernel.org> wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
> similar symbols that are no longer available with the platform gone,
> though the drivers themselves are still used on newer platforms,
> so remove these hacks.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 00/21] ARM: s3c: clean out obsolete platforms
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (20 preceding siblings ...)
2022-10-21 20:27 ` [PATCH 21/21] ASoC: samsung: remove unused drivers Arnd Bergmann
@ 2022-10-22 15:18 ` Krzysztof Kozlowski
2022-10-22 19:48 ` Arnd Bergmann
2022-10-24 13:00 ` Rob Herring
22 siblings, 1 reply; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-22 15:18 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
linux-doc, linux-samsung-soc, devicetree, patches, linux-stm32,
linux-ide, linux-clk, linux-pm, dmaengine, linux-hwmon,
linux-i2c, linux-iio, linux-input, linux-leds, linux-media,
linux-mmc, linux-mtd, linux-gpio, linux-rtc, linux-spi,
linux-serial, linux-usb, linux-fbdev, dri-devel, linux-watchdog,
alsa-devel, linux-pwm
On 21/10/2022 16:22, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform was marked as deprecated a while ago,
> and for the s3c64xx platform, we marked all except one legacy
> board file as unused.
>
> This series removes all of those, leaving only s3c64xx support
> for DT based boots as well as the cragg6410 board file.
>
> About half of the s3c specific drivers were only used on
> the now removed machines, so these drivers can be retired
> as well. I can either merge the driver removal patches through
> the soc tree along with the board file patches, or subsystem
> maintainers can pick them up into their own trees, whichever
> they prefer.
Just to be sure - do you expect me to ack the series, or rather as usual
pick them up?
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 00/21] ARM: s3c: clean out obsolete platforms
2022-10-22 15:18 ` [PATCH 00/21] ARM: s3c: clean out obsolete platforms Krzysztof Kozlowski
@ 2022-10-22 19:48 ` Arnd Bergmann
0 siblings, 0 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-22 19:48 UTC (permalink / raw)
To: Krzysztof Kozlowski, Arnd Bergmann, linux-arm-kernel
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, linux-doc,
linux-samsung-soc, devicetree, patches, linux-stm32, linux-ide,
linux-clk, linux-pm, dmaengine, linux-hwmon, linux-i2c,
linux-iio, linux-input, linux-leds, linux-media,
linux-mmc @ vger . kernel . org, linux-mtd,
open list:GPIO SUBSYSTEM, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, dri-devel, linux-watchdog, alsa-devel,
linux-pwm
On Sat, Oct 22, 2022, at 17:18, Krzysztof Kozlowski wrote:
> On 21/10/2022 16:22, Arnd Bergmann wrote:
>> From: Arnd Bergmann <arnd@arndb.de>
>>
>> The s3c24xx platform was marked as deprecated a while ago,
>> and for the s3c64xx platform, we marked all except one legacy
>> board file as unused.
>>
>> This series removes all of those, leaving only s3c64xx support
>> for DT based boots as well as the cragg6410 board file.
>>
>> About half of the s3c specific drivers were only used on
>> the now removed machines, so these drivers can be retired
>> as well. I can either merge the driver removal patches through
>> the soc tree along with the board file patches, or subsystem
>> maintainers can pick them up into their own trees, whichever
>> they prefer.
>
> Just to be sure - do you expect me to ack the series, or rather as usual
> pick them up?
I think in this case it is easier if I pick them up with your
Ack along with the other platforms I posted, as there are
some minor conflicts between Makefile/Kconfig changes where
I remove adjacent lines.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 01/21] ARM: s3c: remove all s3c24xx support
2022-10-21 20:27 ` [PATCH 01/21] ARM: s3c: remove all s3c24xx support Arnd Bergmann
@ 2022-10-22 20:56 ` Heiko Stübner
2022-10-24 14:27 ` Arnd Bergmann
2022-10-24 12:25 ` Krzysztof Kozlowski
2022-10-27 23:10 ` Stephen Boyd
2 siblings, 1 reply; 82+ messages in thread
From: Heiko Stübner @ 2022-10-22 20:56 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Arnd Bergmann
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Arnaud Patard, Christer Weinigel, Guillaume GOURAT,
openmoko-kernel, Jonathan Corbet, Alim Akhtar, Olof Johansson,
soc, Rob Herring, Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi,
Michael Turquette, Stephen Boyd, linux-doc, linux-samsung-soc,
devicetree, linux-stm32, linux-clk
Am Freitag, 21. Oktober 2022, 22:27:34 CEST schrieb Arnd Bergmann:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark
> as deprecated and schedule removal") and can be removed. This includes
> all files that are exclusively for s3c24xx and not shared with s3c64xx,
> as well as the glue logic in Kconfig and the maintainer file entries.
>
> Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
> Cc: Ben Dooks <ben-linux@fluff.org>
> Cc: Christer Weinigel <christer@weinigel.se>
> Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv>
> Cc: Heiko Stuebner <heiko@sntech.de>
> Cc: Simtec Linux Team <linux@simtec.co.uk>
> Cc: openmoko-kernel@lists.openmoko.org
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
So many memories of me starting out in the kernel on s3c24xx.
But it's no use trying to keep stuff around that nobody will likely
ever use again. So with a sad face
Acked-by: Heiko Stuebner <heiko@sntech.de>
though you might want to also include
drivers/dma/s3c24xx-dma.c
Heiko
> ---
> Documentation/arm/index.rst | 1 -
> Documentation/arm/samsung-s3c24xx/cpufreq.rst | 77 -
> .../arm/samsung-s3c24xx/eb2410itx.rst | 59 -
> Documentation/arm/samsung-s3c24xx/gpio.rst | 172 ---
> Documentation/arm/samsung-s3c24xx/h1940.rst | 41 -
> Documentation/arm/samsung-s3c24xx/index.rst | 20 -
> Documentation/arm/samsung-s3c24xx/nand.rst | 30 -
> .../arm/samsung-s3c24xx/overview.rst | 311 ----
> Documentation/arm/samsung-s3c24xx/s3c2412.rst | 121 --
> Documentation/arm/samsung-s3c24xx/s3c2413.rst | 22 -
> .../arm/samsung-s3c24xx/smdk2440.rst | 57 -
> Documentation/arm/samsung-s3c24xx/suspend.rst | 137 --
> .../arm/samsung-s3c24xx/usb-host.rst | 91 --
> Documentation/arm/samsung/overview.rst | 13 -
> MAINTAINERS | 16 -
> arch/arm/Kconfig | 3 +-
> arch/arm/Kconfig.debug | 58 +-
> arch/arm/Makefile | 2 -
> arch/arm/boot/dts/Makefile | 2 -
> arch/arm/boot/dts/s3c2410-pinctrl.h | 19 -
> arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 172 ---
> arch/arm/boot/dts/s3c2416-smdk2416.dts | 77 -
> arch/arm/boot/dts/s3c2416.dtsi | 124 --
> arch/arm/boot/dts/s3c24xx.dtsi | 92 --
> arch/arm/configs/mini2440_defconfig | 338 -----
> arch/arm/configs/s3c2410_defconfig | 437 ------
> arch/arm/configs/tct_hammer_defconfig | 58 -
> arch/arm/mach-s3c/Kconfig | 27 +-
> arch/arm/mach-s3c/Kconfig.s3c24xx | 604 --------
> arch/arm/mach-s3c/Makefile | 4 -
> arch/arm/mach-s3c/Makefile.s3c24xx | 102 --
> arch/arm/mach-s3c/anubis.h | 50 -
> arch/arm/mach-s3c/bast-ide.c | 82 -
> arch/arm/mach-s3c/bast-irq.c | 137 --
> arch/arm/mach-s3c/bast.h | 194 ---
> arch/arm/mach-s3c/common-smdk-s3c24xx.c | 228 ---
> arch/arm/mach-s3c/common-smdk-s3c24xx.h | 11 -
> arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c | 94 --
> arch/arm/mach-s3c/dma-s3c24xx.h | 51 -
> arch/arm/mach-s3c/fb-core-s3c24xx.h | 24 -
> arch/arm/mach-s3c/gpio-samsung-s3c24xx.h | 103 --
> arch/arm/mach-s3c/gta02.h | 20 -
> arch/arm/mach-s3c/h1940-bluetooth.c | 140 --
> arch/arm/mach-s3c/h1940.h | 52 -
> arch/arm/mach-s3c/hardware-s3c24xx.h | 14 -
> arch/arm/mach-s3c/iotiming-s3c2410.c | 472 ------
> arch/arm/mach-s3c/iotiming-s3c2412.c | 278 ----
> arch/arm/mach-s3c/irq-pm-s3c24xx.c | 115 --
> arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c | 9 -
> arch/arm/mach-s3c/irq-s3c24xx-fiq.S | 112 --
> arch/arm/mach-s3c/irq-s3c24xx.c | 1352 -----------------
> arch/arm/mach-s3c/irqs-s3c24xx.h | 219 ---
> arch/arm/mach-s3c/mach-amlm5900.c | 248 ---
> arch/arm/mach-s3c/mach-anubis.c | 422 -----
> arch/arm/mach-s3c/mach-at2440evb.c | 233 ---
> arch/arm/mach-s3c/mach-bast.c | 583 -------
> arch/arm/mach-s3c/mach-gta02.c | 588 -------
> arch/arm/mach-s3c/mach-h1940.c | 809 ----------
> arch/arm/mach-s3c/mach-jive.c | 693 ---------
> arch/arm/mach-s3c/mach-mini2440.c | 804 ----------
> arch/arm/mach-s3c/mach-n30.c | 682 ---------
> arch/arm/mach-s3c/mach-nexcoder.c | 162 --
> arch/arm/mach-s3c/mach-osiris-dvs.c | 178 ---
> arch/arm/mach-s3c/mach-osiris.c | 405 -----
> arch/arm/mach-s3c/mach-otom.c | 124 --
> arch/arm/mach-s3c/mach-qt2410.c | 375 -----
> arch/arm/mach-s3c/mach-rx1950.c | 884 -----------
> arch/arm/mach-s3c/mach-rx3715.c | 213 ---
> arch/arm/mach-s3c/mach-s3c2416-dt.c | 48 -
> arch/arm/mach-s3c/mach-smdk2410.c | 112 --
> arch/arm/mach-s3c/mach-smdk2413.c | 169 ---
> arch/arm/mach-s3c/mach-smdk2416.c | 248 ---
> arch/arm/mach-s3c/mach-smdk2440.c | 180 ---
> arch/arm/mach-s3c/mach-smdk2443.c | 126 --
> arch/arm/mach-s3c/mach-tct_hammer.c | 157 --
> arch/arm/mach-s3c/mach-vr1000.c | 364 -----
> arch/arm/mach-s3c/mach-vstms.c | 166 --
> arch/arm/mach-s3c/map-s3c24xx.h | 159 --
> arch/arm/mach-s3c/nand-core-s3c24xx.h | 24 -
> arch/arm/mach-s3c/osiris.h | 50 -
> arch/arm/mach-s3c/pll-s3c2410.c | 83 -
> arch/arm/mach-s3c/pll-s3c2440-12000000.c | 95 --
> arch/arm/mach-s3c/pll-s3c2440-16934400.c | 122 --
> arch/arm/mach-s3c/pm-core-s3c24xx.h | 96 --
> arch/arm/mach-s3c/pm-h1940.S | 19 -
> arch/arm/mach-s3c/pm-s3c2410.c | 170 ---
> arch/arm/mach-s3c/pm-s3c2412.c | 126 --
> arch/arm/mach-s3c/pm-s3c2416.c | 81 -
> arch/arm/mach-s3c/pm-s3c24xx.c | 121 --
> arch/arm/mach-s3c/regs-clock-s3c24xx.h | 146 --
> arch/arm/mach-s3c/regs-dsc-s3c24xx.h | 22 -
> arch/arm/mach-s3c/regs-gpio-s3c24xx.h | 608 --------
> arch/arm/mach-s3c/regs-irq-s3c24xx.h | 51 -
> arch/arm/mach-s3c/regs-mem-s3c24xx.h | 53 -
> arch/arm/mach-s3c/regs-s3c2443-clock.h | 238 ---
> arch/arm/mach-s3c/rtc-core-s3c24xx.h | 23 -
> arch/arm/mach-s3c/s3c2410.c | 130 --
> arch/arm/mach-s3c/s3c2412-power.h | 34 -
> arch/arm/mach-s3c/s3c2412.c | 175 ---
> arch/arm/mach-s3c/s3c2412.h | 25 -
> arch/arm/mach-s3c/s3c2416.c | 132 --
> arch/arm/mach-s3c/s3c2440.c | 71 -
> arch/arm/mach-s3c/s3c2442.c | 62 -
> arch/arm/mach-s3c/s3c2443.c | 112 --
> arch/arm/mach-s3c/s3c244x.c | 128 --
> arch/arm/mach-s3c/s3c24xx.c | 687 ---------
> arch/arm/mach-s3c/s3c24xx.h | 124 --
> arch/arm/mach-s3c/setup-i2c-s3c24xx.c | 23 -
> arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c | 31 -
> arch/arm/mach-s3c/setup-spi-s3c24xx.c | 27 -
> arch/arm/mach-s3c/setup-ts-s3c24xx.c | 29 -
> arch/arm/mach-s3c/simtec-audio.c | 76 -
> arch/arm/mach-s3c/simtec-nor.c | 74 -
> arch/arm/mach-s3c/simtec-pm.c | 60 -
> arch/arm/mach-s3c/simtec-usb.c | 125 --
> arch/arm/mach-s3c/simtec.h | 17 -
> arch/arm/mach-s3c/sleep-s3c2410.S | 54 -
> arch/arm/mach-s3c/sleep-s3c2412.S | 53 -
> arch/arm/mach-s3c/sleep-s3c24xx.S | 69 -
> arch/arm/mach-s3c/spi-core-s3c24xx.h | 21 -
> arch/arm/mach-s3c/vr1000.h | 113 --
> drivers/soc/samsung/Kconfig | 4 -
> include/dt-bindings/clock/s3c2410.h | 59 -
> include/dt-bindings/clock/s3c2412.h | 70 -
> include/dt-bindings/clock/s3c2443.h | 91 --
> include/linux/amba/pl093.h | 77 -
> 126 files changed, 8 insertions(+), 21049 deletions(-)
> delete mode 100644 Documentation/arm/samsung-s3c24xx/cpufreq.rst
> delete mode 100644 Documentation/arm/samsung-s3c24xx/eb2410itx.rst
> delete mode 100644 Documentation/arm/samsung-s3c24xx/gpio.rst
> delete mode 100644 Documentation/arm/samsung-s3c24xx/h1940.rst
> delete mode 100644 Documentation/arm/samsung-s3c24xx/index.rst
> delete mode 100644 Documentation/arm/samsung-s3c24xx/nand.rst
> delete mode 100644 Documentation/arm/samsung-s3c24xx/overview.rst
> delete mode 100644 Documentation/arm/samsung-s3c24xx/s3c2412.rst
> delete mode 100644 Documentation/arm/samsung-s3c24xx/s3c2413.rst
> delete mode 100644 Documentation/arm/samsung-s3c24xx/smdk2440.rst
> delete mode 100644 Documentation/arm/samsung-s3c24xx/suspend.rst
> delete mode 100644 Documentation/arm/samsung-s3c24xx/usb-host.rst
> delete mode 100644 arch/arm/boot/dts/s3c2410-pinctrl.h
> delete mode 100644 arch/arm/boot/dts/s3c2416-pinctrl.dtsi
> delete mode 100644 arch/arm/boot/dts/s3c2416-smdk2416.dts
> delete mode 100644 arch/arm/boot/dts/s3c2416.dtsi
> delete mode 100644 arch/arm/boot/dts/s3c24xx.dtsi
> delete mode 100644 arch/arm/configs/mini2440_defconfig
> delete mode 100644 arch/arm/configs/s3c2410_defconfig
> delete mode 100644 arch/arm/configs/tct_hammer_defconfig
> delete mode 100644 arch/arm/mach-s3c/Kconfig.s3c24xx
> delete mode 100644 arch/arm/mach-s3c/Makefile.s3c24xx
> delete mode 100644 arch/arm/mach-s3c/anubis.h
> delete mode 100644 arch/arm/mach-s3c/bast-ide.c
> delete mode 100644 arch/arm/mach-s3c/bast-irq.c
> delete mode 100644 arch/arm/mach-s3c/bast.h
> delete mode 100644 arch/arm/mach-s3c/common-smdk-s3c24xx.c
> delete mode 100644 arch/arm/mach-s3c/common-smdk-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
> delete mode 100644 arch/arm/mach-s3c/dma-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/fb-core-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/gta02.h
> delete mode 100644 arch/arm/mach-s3c/h1940-bluetooth.c
> delete mode 100644 arch/arm/mach-s3c/h1940.h
> delete mode 100644 arch/arm/mach-s3c/hardware-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/iotiming-s3c2410.c
> delete mode 100644 arch/arm/mach-s3c/iotiming-s3c2412.c
> delete mode 100644 arch/arm/mach-s3c/irq-pm-s3c24xx.c
> delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
> delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx-fiq.S
> delete mode 100644 arch/arm/mach-s3c/irq-s3c24xx.c
> delete mode 100644 arch/arm/mach-s3c/irqs-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/mach-amlm5900.c
> delete mode 100644 arch/arm/mach-s3c/mach-anubis.c
> delete mode 100644 arch/arm/mach-s3c/mach-at2440evb.c
> delete mode 100644 arch/arm/mach-s3c/mach-bast.c
> delete mode 100644 arch/arm/mach-s3c/mach-gta02.c
> delete mode 100644 arch/arm/mach-s3c/mach-h1940.c
> delete mode 100644 arch/arm/mach-s3c/mach-jive.c
> delete mode 100644 arch/arm/mach-s3c/mach-mini2440.c
> delete mode 100644 arch/arm/mach-s3c/mach-n30.c
> delete mode 100644 arch/arm/mach-s3c/mach-nexcoder.c
> delete mode 100644 arch/arm/mach-s3c/mach-osiris-dvs.c
> delete mode 100644 arch/arm/mach-s3c/mach-osiris.c
> delete mode 100644 arch/arm/mach-s3c/mach-otom.c
> delete mode 100644 arch/arm/mach-s3c/mach-qt2410.c
> delete mode 100644 arch/arm/mach-s3c/mach-rx1950.c
> delete mode 100644 arch/arm/mach-s3c/mach-rx3715.c
> delete mode 100644 arch/arm/mach-s3c/mach-s3c2416-dt.c
> delete mode 100644 arch/arm/mach-s3c/mach-smdk2410.c
> delete mode 100644 arch/arm/mach-s3c/mach-smdk2413.c
> delete mode 100644 arch/arm/mach-s3c/mach-smdk2416.c
> delete mode 100644 arch/arm/mach-s3c/mach-smdk2440.c
> delete mode 100644 arch/arm/mach-s3c/mach-smdk2443.c
> delete mode 100644 arch/arm/mach-s3c/mach-tct_hammer.c
> delete mode 100644 arch/arm/mach-s3c/mach-vr1000.c
> delete mode 100644 arch/arm/mach-s3c/mach-vstms.c
> delete mode 100644 arch/arm/mach-s3c/map-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/nand-core-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/osiris.h
> delete mode 100644 arch/arm/mach-s3c/pll-s3c2410.c
> delete mode 100644 arch/arm/mach-s3c/pll-s3c2440-12000000.c
> delete mode 100644 arch/arm/mach-s3c/pll-s3c2440-16934400.c
> delete mode 100644 arch/arm/mach-s3c/pm-core-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/pm-h1940.S
> delete mode 100644 arch/arm/mach-s3c/pm-s3c2410.c
> delete mode 100644 arch/arm/mach-s3c/pm-s3c2412.c
> delete mode 100644 arch/arm/mach-s3c/pm-s3c2416.c
> delete mode 100644 arch/arm/mach-s3c/pm-s3c24xx.c
> delete mode 100644 arch/arm/mach-s3c/regs-clock-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/regs-dsc-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/regs-gpio-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/regs-irq-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/regs-mem-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/regs-s3c2443-clock.h
> delete mode 100644 arch/arm/mach-s3c/rtc-core-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/s3c2410.c
> delete mode 100644 arch/arm/mach-s3c/s3c2412-power.h
> delete mode 100644 arch/arm/mach-s3c/s3c2412.c
> delete mode 100644 arch/arm/mach-s3c/s3c2412.h
> delete mode 100644 arch/arm/mach-s3c/s3c2416.c
> delete mode 100644 arch/arm/mach-s3c/s3c2440.c
> delete mode 100644 arch/arm/mach-s3c/s3c2442.c
> delete mode 100644 arch/arm/mach-s3c/s3c2443.c
> delete mode 100644 arch/arm/mach-s3c/s3c244x.c
> delete mode 100644 arch/arm/mach-s3c/s3c24xx.c
> delete mode 100644 arch/arm/mach-s3c/s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/setup-i2c-s3c24xx.c
> delete mode 100644 arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
> delete mode 100644 arch/arm/mach-s3c/setup-spi-s3c24xx.c
> delete mode 100644 arch/arm/mach-s3c/setup-ts-s3c24xx.c
> delete mode 100644 arch/arm/mach-s3c/simtec-audio.c
> delete mode 100644 arch/arm/mach-s3c/simtec-nor.c
> delete mode 100644 arch/arm/mach-s3c/simtec-pm.c
> delete mode 100644 arch/arm/mach-s3c/simtec-usb.c
> delete mode 100644 arch/arm/mach-s3c/simtec.h
> delete mode 100644 arch/arm/mach-s3c/sleep-s3c2410.S
> delete mode 100644 arch/arm/mach-s3c/sleep-s3c2412.S
> delete mode 100644 arch/arm/mach-s3c/sleep-s3c24xx.S
> delete mode 100644 arch/arm/mach-s3c/spi-core-s3c24xx.h
> delete mode 100644 arch/arm/mach-s3c/vr1000.h
> delete mode 100644 include/dt-bindings/clock/s3c2410.h
> delete mode 100644 include/dt-bindings/clock/s3c2412.h
> delete mode 100644 include/dt-bindings/clock/s3c2443.h
> delete mode 100644 include/linux/amba/pl093.h
>
> diff --git a/Documentation/arm/index.rst b/Documentation/arm/index.rst
> index 8c636d4a061f..ae42fe886f0d 100644
> --- a/Documentation/arm/index.rst
> +++ b/Documentation/arm/index.rst
> @@ -64,7 +64,6 @@ SoC-specific documents
> sunxi
>
> samsung/index
> - samsung-s3c24xx/index
>
> sunxi/clocks
>
> diff --git a/Documentation/arm/samsung-s3c24xx/cpufreq.rst b/Documentation/arm/samsung-s3c24xx/cpufreq.rst
> deleted file mode 100644
> index cd22697cf606..000000000000
> diff --git a/Documentation/arm/samsung-s3c24xx/eb2410itx.rst b/Documentation/arm/samsung-s3c24xx/eb2410itx.rst
> deleted file mode 100644
> index 7863c93652f8..000000000000
> diff --git a/Documentation/arm/samsung-s3c24xx/gpio.rst b/Documentation/arm/samsung-s3c24xx/gpio.rst
> deleted file mode 100644
> index f4a8c800a457..000000000000
> diff --git a/Documentation/arm/samsung-s3c24xx/h1940.rst b/Documentation/arm/samsung-s3c24xx/h1940.rst
> deleted file mode 100644
> index 62a562c178e3..000000000000
> diff --git a/Documentation/arm/samsung-s3c24xx/index.rst b/Documentation/arm/samsung-s3c24xx/index.rst
> deleted file mode 100644
> index ccb951a0bedb..000000000000
> diff --git a/Documentation/arm/samsung-s3c24xx/nand.rst b/Documentation/arm/samsung-s3c24xx/nand.rst
> deleted file mode 100644
> index 938995694ee7..000000000000
> diff --git a/Documentation/arm/samsung-s3c24xx/overview.rst b/Documentation/arm/samsung-s3c24xx/overview.rst
> deleted file mode 100644
> index 14535e5cffb7..000000000000
> diff --git a/Documentation/arm/samsung-s3c24xx/s3c2412.rst b/Documentation/arm/samsung-s3c24xx/s3c2412.rst
> deleted file mode 100644
> index 68b985fc6bf4..000000000000
> diff --git a/Documentation/arm/samsung-s3c24xx/s3c2413.rst b/Documentation/arm/samsung-s3c24xx/s3c2413.rst
> deleted file mode 100644
> index 1f51e207fc46..000000000000
> diff --git a/Documentation/arm/samsung-s3c24xx/smdk2440.rst b/Documentation/arm/samsung-s3c24xx/smdk2440.rst
> deleted file mode 100644
> index 524fd0b4afaf..000000000000
> diff --git a/Documentation/arm/samsung-s3c24xx/suspend.rst b/Documentation/arm/samsung-s3c24xx/suspend.rst
> deleted file mode 100644
> index b4f3ae9fe76e..000000000000
> diff --git a/Documentation/arm/samsung-s3c24xx/usb-host.rst b/Documentation/arm/samsung-s3c24xx/usb-host.rst
> deleted file mode 100644
> index 7aaffac89e04..000000000000
> diff --git a/Documentation/arm/samsung/overview.rst b/Documentation/arm/samsung/overview.rst
> index e74307897416..8b15a190169b 100644
> --- a/Documentation/arm/samsung/overview.rst
> +++ b/Documentation/arm/samsung/overview.rst
> @@ -12,21 +12,10 @@ Introduction
>
> The currently supported SoCs are:
>
> - - S3C24XX: See Documentation/arm/samsung-s3c24xx/overview.rst for full list
> - S3C64XX: S3C6400 and S3C6410
> - S5PC110 / S5PV210
>
>
> -S3C24XX Systems
> ----------------
> -
> - There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which
> - deals with the architecture and drivers specific to these devices.
> -
> - See Documentation/arm/samsung-s3c24xx/overview.rst for more information
> - on the implementation details and specific support.
> -
> -
> Configuration
> -------------
>
> @@ -51,8 +40,6 @@ Layout
> specific information. It contains the base clock, GPIO and device definitions
> to get the system running.
>
> - plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
> -
> plat-s5p is for s5p specific builds, and contains common support for the
> S5P specific systems. Not all S5Ps use all the features in this directory
> due to differences in the hardware.
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ec3d53b5e1d1..071d64e2a7ca 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2462,13 +2462,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> S: Maintained
> F: arch/arm64/boot/dts/freescale/s32g*.dts*
>
> -ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
> -L: openmoko-kernel@lists.openmoko.org (subscribers-only)
> -S: Orphan
> -W: http://wiki.openmoko.org/wiki/Neo_FreeRunner
> -F: arch/arm/mach-s3c/gta02.h
> -F: arch/arm/mach-s3c/mach-gta02.c
> -
> ARM/Orion SoC/Technologic Systems TS-78xx platform support
> M: Alexander Clouter <alex@digriz.org.uk>
> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> @@ -2649,7 +2642,6 @@ F: include/linux/platform_data/*s3c*
> F: include/linux/serial_s3c.h
> F: include/linux/soc/samsung/
> N: exynos
> -N: s3c2410
> N: s3c64xx
> N: s5pv210
>
> @@ -18673,14 +18665,6 @@ M: Simtec Linux Team <linux@simtec.co.uk>
> S: Supported
> W: http://www.simtec.co.uk/products/EB110ATX/
>
> -SIMTEC EB2410ITX (BAST)
> -M: Simtec Linux Team <linux@simtec.co.uk>
> -S: Supported
> -W: http://www.simtec.co.uk/products/EB2410ITX/
> -F: arch/arm/mach-s3c/bast-ide.c
> -F: arch/arm/mach-s3c/bast-irq.c
> -F: arch/arm/mach-s3c/mach-bast.c
> -
> SIOX
> M: Thorsten Scherer <t.scherer@eckelmann.de>
> M: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index c1614f91e04c..280701af4a01 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -279,7 +279,6 @@ config PHYS_OFFSET
> default DRAM_BASE if !MMU
> default 0x00000000 if ARCH_FOOTBRIDGE
> default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
> - default 0x30000000 if ARCH_S3C24XX
> default 0xa0000000 if ARCH_PXA
> default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100
> default 0
> @@ -1154,7 +1153,7 @@ config ARCH_NR_GPIO
> default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \
> ARCH_ZYNQ || ARCH_ASPEED
> default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
> - SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
> + SOC_DRA7XX || ARCH_S3C64XX || ARCH_S5PV210
> default 416 if ARCH_SUNXI
> default 392 if ARCH_U8500
> default 352 if ARCH_VT8500
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 20312792340d..874551895181 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -1006,7 +1006,6 @@ choice
> config DEBUG_S3C_UART0
> depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> - select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> select DEBUG_S5PV210_UART if ARCH_S5PV210
> bool "Use Samsung S3C UART 0 for low-level debug"
> @@ -1018,7 +1017,6 @@ choice
> config DEBUG_S3C_UART1
> depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> - select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> select DEBUG_S5PV210_UART if ARCH_S5PV210
> bool "Use Samsung S3C UART 1 for low-level debug"
> @@ -1030,7 +1028,6 @@ choice
> config DEBUG_S3C_UART2
> depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
> select DEBUG_EXYNOS_UART if ARCH_EXYNOS
> - select DEBUG_S3C24XX_UART if ARCH_S3C24XX
> select DEBUG_S3C64XX_UART if ARCH_S3C64XX
> select DEBUG_S5PV210_UART if ARCH_S5PV210
> bool "Use Samsung S3C UART 2 for low-level debug"
> @@ -1050,33 +1047,6 @@ choice
> their output to UART 3. The port must have been initialised
> by the boot-loader before use.
>
> - config DEBUG_S3C2410_UART0
> - depends on ARCH_S3C24XX
> - select DEBUG_S3C2410_UART
> - bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
> - help
> - Say Y here if you want the debug print routines to direct
> - their output to UART 0. The port must have been initialised
> - by the boot-loader before use.
> -
> - config DEBUG_S3C2410_UART1
> - depends on ARCH_S3C24XX
> - select DEBUG_S3C2410_UART
> - bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
> - help
> - Say Y here if you want the debug print routines to direct
> - their output to UART 1. The port must have been initialised
> - by the boot-loader before use.
> -
> - config DEBUG_S3C2410_UART2
> - depends on ARCH_S3C24XX
> - select DEBUG_S3C2410_UART
> - bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
> - help
> - Say Y here if you want the debug print routines to direct
> - their output to UART 2. The port must have been initialised
> - by the boot-loader before use.
> -
> config DEBUG_SA1100
> depends on ARCH_SA1100
> bool "Use SA1100 UARTs for low-level debug"
> @@ -1439,13 +1409,6 @@ config DEBUG_AT91_UART
> config DEBUG_EXYNOS_UART
> bool
>
> -config DEBUG_S3C2410_UART
> - bool
> - select DEBUG_S3C24XX_UART
> -
> -config DEBUG_S3C24XX_UART
> - bool
> -
> config DEBUG_S3C64XX_UART
> bool
>
> @@ -1453,8 +1416,7 @@ config DEBUG_S5PV210_UART
> bool
>
> config DEBUG_S3C_UART
> - depends on DEBUG_S3C2410_UART || DEBUG_S3C24XX_UART || \
> - DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \
> + depends on DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \
> DEBUG_EXYNOS_UART
> int
> default "0" if DEBUG_S3C_UART0
> @@ -1555,7 +1517,7 @@ config DEBUG_LL_INCLUDE
> default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
> default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
> default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
> - default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
> + default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART
> default "debug/s5pv210.S" if DEBUG_S5PV210_UART
> default "debug/sti.S" if DEBUG_STIH41X_ASC2
> default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
> @@ -1638,12 +1600,6 @@ config DEBUG_UART_PHYS
> default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
> default 0x49020000 if DEBUG_OMAP3UART3
> default 0x49042000 if DEBUG_OMAP3UART4
> - default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
> - DEBUG_S3C2410_UART0)
> - default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
> - DEBUG_S3C2410_UART1)
> - default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
> - DEBUG_S3C2410_UART2)
> default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
> default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
> default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
> @@ -1711,7 +1667,7 @@ config DEBUG_UART_PHYS
> DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \
> DEBUG_RCAR_GEN2_SCIFA2 || \
> DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
> - DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
> + DEBUG_RMOBILE_SCIFA4 || \
> DEBUG_S3C64XX_UART || \
> DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
> DEBUG_DIGICOLOR_UA0 || \
> @@ -1748,15 +1704,9 @@ config DEBUG_UART_VIRT
> default 0xf6200000 if DEBUG_PXA_UART1
> default 0xf7000000 if DEBUG_SUN9I_UART0
> default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
> - default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
> - DEBUG_S3C2410_UART0)
> default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
> default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
> default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
> - default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
> - DEBUG_S3C2410_UART1)
> - default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
> - DEBUG_S3C2410_UART2)
> default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
> default 0xf7fc9000 if DEBUG_BERLIN_UART
> default 0xf8007000 if DEBUG_HIP04_UART
> @@ -1820,7 +1770,7 @@ config DEBUG_UART_VIRT
> default DEBUG_UART_PHYS if !MMU
> depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
> DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
> - DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
> + DEBUG_QCOM_UARTDM || \
> DEBUG_S3C64XX_UART || \
> DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
> DEBUG_DIGICOLOR_UA0 || \
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 1a62035d1207..129162244c68 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -143,8 +143,6 @@ CHECKFLAGS += -D__arm__
> # during boot, and this offset is critical to the functioning of
> # kexec-tools.
> textofs-y := 0x00008000
> -# We don't want the htc bootloader to corrupt kernel during resume
> -textofs-$(CONFIG_PM_H1940) := 0x00108000
> # RTD1195 has Boot ROM at start of address space
> textofs-$(CONFIG_ARCH_REALTEK) := 0x00108000
> # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 6aa7dc4db2fc..f0699ec7da2f 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1156,8 +1156,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3288-veyron-speedy.dtb \
> rk3288-veyron-tiger.dtb \
> rk3288-vyasa.dtb
> -dtb-$(CONFIG_ARCH_S3C24XX) += \
> - s3c2416-smdk2416.dtb
> dtb-$(CONFIG_ARCH_S3C64XX) += \
> s3c6410-mini6410.dtb \
> s3c6410-smdk6410.dtb
> diff --git a/arch/arm/boot/dts/s3c2410-pinctrl.h b/arch/arm/boot/dts/s3c2410-pinctrl.h
> deleted file mode 100644
> index 76b6171ae149..000000000000
> diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
> deleted file mode 100644
> index 3268366bd8bc..000000000000
> diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
> deleted file mode 100644
> index e7c379a9842e..000000000000
> diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
> deleted file mode 100644
> index 4660751cb207..000000000000
> diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
> deleted file mode 100644
> index 06f82c7e458e..000000000000
> diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
> deleted file mode 100644
> index 86e00f684e16..000000000000
> diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
> deleted file mode 100644
> index 41b40863a78e..000000000000
> diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
> deleted file mode 100644
> index 3b29ae1fb750..000000000000
> diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig
> index a64143574546..809f84fca0b8 100644
> --- a/arch/arm/mach-s3c/Kconfig
> +++ b/arch/arm/mach-s3c/Kconfig
> @@ -2,13 +2,10 @@
> #
> # Copyright 2009 Simtec Electronics
>
> -source "arch/arm/mach-s3c/Kconfig.s3c24xx"
> source "arch/arm/mach-s3c/Kconfig.s3c64xx"
>
> config PLAT_SAMSUNG
> - bool
> - depends on PLAT_S3C24XX || ARCH_S3C64XX
> - default y
> + def_bool ARCH_S3C64XX
> select GENERIC_IRQ_CHIP
> select NO_IOPORT_MAP
> select SOC_SAMSUNG
> @@ -16,9 +13,8 @@ config PLAT_SAMSUNG
> Base platform code for all Samsung SoC based systems
>
> config SAMSUNG_PM
> - bool
> - depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX)
> - default y
> + def_bool ARCH_S3C64XX
> + depends on PM
> help
> Base platform power management code for samsung code
>
> @@ -99,11 +95,6 @@ config S3C_DEV_HSMMC3
> help
> Compile in platform device definitions for HSMMC channel 3
>
> -config S3C_DEV_HWMON
> - bool
> - help
> - Compile in platform device definitions for HWMON
> -
> config S3C_DEV_I2C1
> bool
> help
> @@ -156,7 +147,6 @@ config S3C_DEV_USB_HSOTG
>
> config S3C_DEV_WDT
> bool
> - default y if ARCH_S3C24XX
> help
> Compile in platform device definition for Watchdog Timer
>
> @@ -180,22 +170,12 @@ config SAMSUNG_DEV_ADC
> help
> Compile in platform device definition for ADC controller
>
> -config SAMSUNG_DEV_IDE
> - bool
> - help
> - Compile in platform device definitions for IDE
> -
> config S3C64XX_DEV_SPI0
> bool
> help
> Compile in platform device definitions for S3C64XX's type
> SPI controller 0
>
> -config SAMSUNG_DEV_TS
> - bool
> - help
> - Common in platform device definitions for touchscreen device
> -
> config SAMSUNG_DEV_KEYPAD
> bool
> help
> @@ -203,7 +183,6 @@ config SAMSUNG_DEV_KEYPAD
>
> config SAMSUNG_DEV_PWM
> bool
> - default y if ARCH_S3C24XX
> help
> Compile in platform device definition for PWM Timer
>
> diff --git a/arch/arm/mach-s3c/Kconfig.s3c24xx b/arch/arm/mach-s3c/Kconfig.s3c24xx
> deleted file mode 100644
> index 7287e173f30e..000000000000
> diff --git a/arch/arm/mach-s3c/Makefile b/arch/arm/mach-s3c/Makefile
> index 7c7d3318fd61..e7f18039b149 100644
> --- a/arch/arm/mach-s3c/Makefile
> +++ b/arch/arm/mach-s3c/Makefile
> @@ -2,10 +2,6 @@
> #
> # Copyright 2009 Simtec Electronics
>
> -ifdef CONFIG_ARCH_S3C24XX
> -include $(src)/Makefile.s3c24xx
> -endif
> -
> ifdef CONFIG_ARCH_S3C64XX
> include $(src)/Makefile.s3c64xx
> endif
> diff --git a/arch/arm/mach-s3c/Makefile.s3c24xx b/arch/arm/mach-s3c/Makefile.s3c24xx
> deleted file mode 100644
> index 3483ab3a2b81..000000000000
> diff --git a/arch/arm/mach-s3c/anubis.h b/arch/arm/mach-s3c/anubis.h
> deleted file mode 100644
> index 13847292e6c7..000000000000
> diff --git a/arch/arm/mach-s3c/bast-ide.c b/arch/arm/mach-s3c/bast-ide.c
> deleted file mode 100644
> index 67f0adc1fec0..000000000000
> diff --git a/arch/arm/mach-s3c/bast-irq.c b/arch/arm/mach-s3c/bast-irq.c
> deleted file mode 100644
> index cfc2ddc65513..000000000000
> diff --git a/arch/arm/mach-s3c/bast.h b/arch/arm/mach-s3c/bast.h
> deleted file mode 100644
> index a7726f93f5eb..000000000000
> diff --git a/arch/arm/mach-s3c/common-smdk-s3c24xx.c b/arch/arm/mach-s3c/common-smdk-s3c24xx.c
> deleted file mode 100644
> index 6d124bbd384c..000000000000
> diff --git a/arch/arm/mach-s3c/common-smdk-s3c24xx.h b/arch/arm/mach-s3c/common-smdk-s3c24xx.h
> deleted file mode 100644
> index c0352b06e435..000000000000
> diff --git a/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c b/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
> deleted file mode 100644
> index c1784d8facdf..000000000000
> diff --git a/arch/arm/mach-s3c/dma-s3c24xx.h b/arch/arm/mach-s3c/dma-s3c24xx.h
> deleted file mode 100644
> index 25fc9c258fc1..000000000000
> diff --git a/arch/arm/mach-s3c/fb-core-s3c24xx.h b/arch/arm/mach-s3c/fb-core-s3c24xx.h
> deleted file mode 100644
> index 0e07f3ba4aef..000000000000
> diff --git a/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h b/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
> deleted file mode 100644
> index c29fdc95f883..000000000000
> diff --git a/arch/arm/mach-s3c/gta02.h b/arch/arm/mach-s3c/gta02.h
> deleted file mode 100644
> index 043ae382bfc5..000000000000
> diff --git a/arch/arm/mach-s3c/h1940-bluetooth.c b/arch/arm/mach-s3c/h1940-bluetooth.c
> deleted file mode 100644
> index 59edcf8a620d..000000000000
> diff --git a/arch/arm/mach-s3c/h1940.h b/arch/arm/mach-s3c/h1940.h
> deleted file mode 100644
> index 5dfe9d10cd15..000000000000
> diff --git a/arch/arm/mach-s3c/hardware-s3c24xx.h b/arch/arm/mach-s3c/hardware-s3c24xx.h
> deleted file mode 100644
> index 33b37467d05f..000000000000
> diff --git a/arch/arm/mach-s3c/iotiming-s3c2410.c b/arch/arm/mach-s3c/iotiming-s3c2410.c
> deleted file mode 100644
> index 09f388d8f824..000000000000
> diff --git a/arch/arm/mach-s3c/iotiming-s3c2412.c b/arch/arm/mach-s3c/iotiming-s3c2412.c
> deleted file mode 100644
> index 003f89c4dc53..000000000000
> diff --git a/arch/arm/mach-s3c/irq-pm-s3c24xx.c b/arch/arm/mach-s3c/irq-pm-s3c24xx.c
> deleted file mode 100644
> index 55f41135ad70..000000000000
> diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c b/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
> deleted file mode 100644
> index 84cf86376ded..000000000000
> diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq.S b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
> deleted file mode 100644
> index 5d238d9a798e..000000000000
> diff --git a/arch/arm/mach-s3c/irq-s3c24xx.c b/arch/arm/mach-s3c/irq-s3c24xx.c
> deleted file mode 100644
> index 088cc04b7431..000000000000
> diff --git a/arch/arm/mach-s3c/irqs-s3c24xx.h b/arch/arm/mach-s3c/irqs-s3c24xx.h
> deleted file mode 100644
> index fecbf7e440c6..000000000000
> diff --git a/arch/arm/mach-s3c/mach-amlm5900.c b/arch/arm/mach-s3c/mach-amlm5900.c
> deleted file mode 100644
> index f85e5885e9b4..000000000000
> diff --git a/arch/arm/mach-s3c/mach-anubis.c b/arch/arm/mach-s3c/mach-anubis.c
> deleted file mode 100644
> index 4536f3e66e27..000000000000
> diff --git a/arch/arm/mach-s3c/mach-at2440evb.c b/arch/arm/mach-s3c/mach-at2440evb.c
> deleted file mode 100644
> index 743403d873e0..000000000000
> diff --git a/arch/arm/mach-s3c/mach-bast.c b/arch/arm/mach-s3c/mach-bast.c
> deleted file mode 100644
> index a33ceab81e09..000000000000
> diff --git a/arch/arm/mach-s3c/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c
> deleted file mode 100644
> index d50a81d85ae1..000000000000
> diff --git a/arch/arm/mach-s3c/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c
> deleted file mode 100644
> index 83ac6cfdb1d8..000000000000
> diff --git a/arch/arm/mach-s3c/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c
> deleted file mode 100644
> index 16859bb3bb13..000000000000
> diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c
> deleted file mode 100644
> index 283be70ca622..000000000000
> diff --git a/arch/arm/mach-s3c/mach-n30.c b/arch/arm/mach-s3c/mach-n30.c
> deleted file mode 100644
> index 90122fc6b2aa..000000000000
> diff --git a/arch/arm/mach-s3c/mach-nexcoder.c b/arch/arm/mach-s3c/mach-nexcoder.c
> deleted file mode 100644
> index d17a3fcb7425..000000000000
> diff --git a/arch/arm/mach-s3c/mach-osiris-dvs.c b/arch/arm/mach-s3c/mach-osiris-dvs.c
> deleted file mode 100644
> index 2e283aedab65..000000000000
> diff --git a/arch/arm/mach-s3c/mach-osiris.c b/arch/arm/mach-s3c/mach-osiris.c
> deleted file mode 100644
> index d900d1354de1..000000000000
> diff --git a/arch/arm/mach-s3c/mach-otom.c b/arch/arm/mach-s3c/mach-otom.c
> deleted file mode 100644
> index 3a2db2f58833..000000000000
> diff --git a/arch/arm/mach-s3c/mach-qt2410.c b/arch/arm/mach-s3c/mach-qt2410.c
> deleted file mode 100644
> index 36fe0684a438..000000000000
> diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c
> deleted file mode 100644
> index d8c49e562660..000000000000
> diff --git a/arch/arm/mach-s3c/mach-rx3715.c b/arch/arm/mach-s3c/mach-rx3715.c
> deleted file mode 100644
> index 52b3c38acbb2..000000000000
> diff --git a/arch/arm/mach-s3c/mach-s3c2416-dt.c b/arch/arm/mach-s3c/mach-s3c2416-dt.c
> deleted file mode 100644
> index 418544d3015d..000000000000
> diff --git a/arch/arm/mach-s3c/mach-smdk2410.c b/arch/arm/mach-s3c/mach-smdk2410.c
> deleted file mode 100644
> index 76b0a8846616..000000000000
> diff --git a/arch/arm/mach-s3c/mach-smdk2413.c b/arch/arm/mach-s3c/mach-smdk2413.c
> deleted file mode 100644
> index 2b4e20aaa346..000000000000
> diff --git a/arch/arm/mach-s3c/mach-smdk2416.c b/arch/arm/mach-s3c/mach-smdk2416.c
> deleted file mode 100644
> index 329fe26be268..000000000000
> diff --git a/arch/arm/mach-s3c/mach-smdk2440.c b/arch/arm/mach-s3c/mach-smdk2440.c
> deleted file mode 100644
> index 6aea769ebde1..000000000000
> diff --git a/arch/arm/mach-s3c/mach-smdk2443.c b/arch/arm/mach-s3c/mach-smdk2443.c
> deleted file mode 100644
> index 075140f8f760..000000000000
> diff --git a/arch/arm/mach-s3c/mach-tct_hammer.c b/arch/arm/mach-s3c/mach-tct_hammer.c
> deleted file mode 100644
> index 93ab1abd8bd3..000000000000
> diff --git a/arch/arm/mach-s3c/mach-vr1000.c b/arch/arm/mach-s3c/mach-vr1000.c
> deleted file mode 100644
> index c85033e6ef8f..000000000000
> diff --git a/arch/arm/mach-s3c/mach-vstms.c b/arch/arm/mach-s3c/mach-vstms.c
> deleted file mode 100644
> index 6f878418be3e..000000000000
> diff --git a/arch/arm/mach-s3c/map-s3c24xx.h b/arch/arm/mach-s3c/map-s3c24xx.h
> deleted file mode 100644
> index f8d075b11d6f..000000000000
> diff --git a/arch/arm/mach-s3c/nand-core-s3c24xx.h b/arch/arm/mach-s3c/nand-core-s3c24xx.h
> deleted file mode 100644
> index a14316729c48..000000000000
> diff --git a/arch/arm/mach-s3c/osiris.h b/arch/arm/mach-s3c/osiris.h
> deleted file mode 100644
> index b6c9c5ed2ba7..000000000000
> diff --git a/arch/arm/mach-s3c/pll-s3c2410.c b/arch/arm/mach-s3c/pll-s3c2410.c
> deleted file mode 100644
> index 3fbc99eaa4a2..000000000000
> diff --git a/arch/arm/mach-s3c/pll-s3c2440-12000000.c b/arch/arm/mach-s3c/pll-s3c2440-12000000.c
> deleted file mode 100644
> index fdb8e8c2fe3b..000000000000
> diff --git a/arch/arm/mach-s3c/pll-s3c2440-16934400.c b/arch/arm/mach-s3c/pll-s3c2440-16934400.c
> deleted file mode 100644
> index 438b6fc099a4..000000000000
> diff --git a/arch/arm/mach-s3c/pm-core-s3c24xx.h b/arch/arm/mach-s3c/pm-core-s3c24xx.h
> deleted file mode 100644
> index a71ed5711019..000000000000
> diff --git a/arch/arm/mach-s3c/pm-h1940.S b/arch/arm/mach-s3c/pm-h1940.S
> deleted file mode 100644
> index 3bf6685123cb..000000000000
> diff --git a/arch/arm/mach-s3c/pm-s3c2410.c b/arch/arm/mach-s3c/pm-s3c2410.c
> deleted file mode 100644
> index a66419883735..000000000000
> diff --git a/arch/arm/mach-s3c/pm-s3c2412.c b/arch/arm/mach-s3c/pm-s3c2412.c
> deleted file mode 100644
> index ed3b4cfc7c0f..000000000000
> diff --git a/arch/arm/mach-s3c/pm-s3c2416.c b/arch/arm/mach-s3c/pm-s3c2416.c
> deleted file mode 100644
> index f69ad84cf4ff..000000000000
> diff --git a/arch/arm/mach-s3c/pm-s3c24xx.c b/arch/arm/mach-s3c/pm-s3c24xx.c
> deleted file mode 100644
> index 3a8f5c38882e..000000000000
> diff --git a/arch/arm/mach-s3c/regs-clock-s3c24xx.h b/arch/arm/mach-s3c/regs-clock-s3c24xx.h
> deleted file mode 100644
> index 933ddb5eedec..000000000000
> diff --git a/arch/arm/mach-s3c/regs-dsc-s3c24xx.h b/arch/arm/mach-s3c/regs-dsc-s3c24xx.h
> deleted file mode 100644
> index 8b8b572aef04..000000000000
> diff --git a/arch/arm/mach-s3c/regs-gpio-s3c24xx.h b/arch/arm/mach-s3c/regs-gpio-s3c24xx.h
> deleted file mode 100644
> index 9a7e262268a7..000000000000
> diff --git a/arch/arm/mach-s3c/regs-irq-s3c24xx.h b/arch/arm/mach-s3c/regs-irq-s3c24xx.h
> deleted file mode 100644
> index c0b97b203415..000000000000
> diff --git a/arch/arm/mach-s3c/regs-mem-s3c24xx.h b/arch/arm/mach-s3c/regs-mem-s3c24xx.h
> deleted file mode 100644
> index 8fed34a1672a..000000000000
> diff --git a/arch/arm/mach-s3c/regs-s3c2443-clock.h b/arch/arm/mach-s3c/regs-s3c2443-clock.h
> deleted file mode 100644
> index b3b670d463db..000000000000
> diff --git a/arch/arm/mach-s3c/rtc-core-s3c24xx.h b/arch/arm/mach-s3c/rtc-core-s3c24xx.h
> deleted file mode 100644
> index e7258b2423fc..000000000000
> diff --git a/arch/arm/mach-s3c/s3c2410.c b/arch/arm/mach-s3c/s3c2410.c
> deleted file mode 100644
> index 4d39d9939c2f..000000000000
> diff --git a/arch/arm/mach-s3c/s3c2412-power.h b/arch/arm/mach-s3c/s3c2412-power.h
> deleted file mode 100644
> index 0031cfaa1d76..000000000000
> diff --git a/arch/arm/mach-s3c/s3c2412.c b/arch/arm/mach-s3c/s3c2412.c
> deleted file mode 100644
> index 0b1ca78c9d2a..000000000000
> diff --git a/arch/arm/mach-s3c/s3c2412.h b/arch/arm/mach-s3c/s3c2412.h
> deleted file mode 100644
> index ed09a0e13bd8..000000000000
> diff --git a/arch/arm/mach-s3c/s3c2416.c b/arch/arm/mach-s3c/s3c2416.c
> deleted file mode 100644
> index 126e6ed29713..000000000000
> diff --git a/arch/arm/mach-s3c/s3c2440.c b/arch/arm/mach-s3c/s3c2440.c
> deleted file mode 100644
> index c6cdee4987e8..000000000000
> diff --git a/arch/arm/mach-s3c/s3c2442.c b/arch/arm/mach-s3c/s3c2442.c
> deleted file mode 100644
> index 0c0e30b6688f..000000000000
> diff --git a/arch/arm/mach-s3c/s3c2443.c b/arch/arm/mach-s3c/s3c2443.c
> deleted file mode 100644
> index 05c3c298b9f8..000000000000
> diff --git a/arch/arm/mach-s3c/s3c244x.c b/arch/arm/mach-s3c/s3c244x.c
> deleted file mode 100644
> index 95df3491e650..000000000000
> diff --git a/arch/arm/mach-s3c/s3c24xx.c b/arch/arm/mach-s3c/s3c24xx.c
> deleted file mode 100644
> index 819a95364af9..000000000000
> diff --git a/arch/arm/mach-s3c/s3c24xx.h b/arch/arm/mach-s3c/s3c24xx.h
> deleted file mode 100644
> index 34dd4ac507e9..000000000000
> diff --git a/arch/arm/mach-s3c/setup-i2c-s3c24xx.c b/arch/arm/mach-s3c/setup-i2c-s3c24xx.c
> deleted file mode 100644
> index 0d88366b234c..000000000000
> diff --git a/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
> deleted file mode 100644
> index 02131b3a731d..000000000000
> diff --git a/arch/arm/mach-s3c/setup-spi-s3c24xx.c b/arch/arm/mach-s3c/setup-spi-s3c24xx.c
> deleted file mode 100644
> index 93fa1bbc9d5c..000000000000
> diff --git a/arch/arm/mach-s3c/setup-ts-s3c24xx.c b/arch/arm/mach-s3c/setup-ts-s3c24xx.c
> deleted file mode 100644
> index 57363eaeb7e8..000000000000
> diff --git a/arch/arm/mach-s3c/simtec-audio.c b/arch/arm/mach-s3c/simtec-audio.c
> deleted file mode 100644
> index 487485bcc2ab..000000000000
> diff --git a/arch/arm/mach-s3c/simtec-nor.c b/arch/arm/mach-s3c/simtec-nor.c
> deleted file mode 100644
> index a6fba056a747..000000000000
> diff --git a/arch/arm/mach-s3c/simtec-pm.c b/arch/arm/mach-s3c/simtec-pm.c
> deleted file mode 100644
> index 490256a766e2..000000000000
> diff --git a/arch/arm/mach-s3c/simtec-usb.c b/arch/arm/mach-s3c/simtec-usb.c
> deleted file mode 100644
> index 76cedb5c7373..000000000000
> diff --git a/arch/arm/mach-s3c/simtec.h b/arch/arm/mach-s3c/simtec.h
> deleted file mode 100644
> index d96bd60872b8..000000000000
> diff --git a/arch/arm/mach-s3c/sleep-s3c2410.S b/arch/arm/mach-s3c/sleep-s3c2410.S
> deleted file mode 100644
> index 04aded98782b..000000000000
> diff --git a/arch/arm/mach-s3c/sleep-s3c2412.S b/arch/arm/mach-s3c/sleep-s3c2412.S
> deleted file mode 100644
> index b4b61737fbb2..000000000000
> diff --git a/arch/arm/mach-s3c/sleep-s3c24xx.S b/arch/arm/mach-s3c/sleep-s3c24xx.S
> deleted file mode 100644
> index 4b2af91f3dce..000000000000
> diff --git a/arch/arm/mach-s3c/spi-core-s3c24xx.h b/arch/arm/mach-s3c/spi-core-s3c24xx.h
> deleted file mode 100644
> index 919c5fd0c9af..000000000000
> diff --git a/arch/arm/mach-s3c/vr1000.h b/arch/arm/mach-s3c/vr1000.h
> deleted file mode 100644
> index 3cfa296bec2a..000000000000
> diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
> index 02e319508cc6..b4f538d7412f 100644
> --- a/drivers/soc/samsung/Kconfig
> +++ b/drivers/soc/samsung/Kconfig
> @@ -85,8 +85,6 @@ config SAMSUNG_PM_CHECK
> Note, this can take several seconds depending on memory size
> and CPU speed.
>
> - See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
> -
> config SAMSUNG_PM_CHECK_CHUNKSIZE
> int "S3C2410 PM Suspend CRC Chunksize (KiB)"
> depends on PM && SAMSUNG_PM_CHECK
> @@ -97,8 +95,6 @@ config SAMSUNG_PM_CHECK_CHUNKSIZE
> the CRC data block will take more memory, but will identify any
> faults with better precision.
>
> - See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
> -
> config EXYNOS_REGULATOR_COUPLER
> bool "Exynos SoC Regulator Coupler" if COMPILE_TEST
> depends on ARCH_EXYNOS || COMPILE_TEST
> diff --git a/include/dt-bindings/clock/s3c2410.h b/include/dt-bindings/clock/s3c2410.h
> deleted file mode 100644
> index 0fb65c3f2f59..000000000000
> diff --git a/include/dt-bindings/clock/s3c2412.h b/include/dt-bindings/clock/s3c2412.h
> deleted file mode 100644
> index b4656156cc0f..000000000000
> diff --git a/include/dt-bindings/clock/s3c2443.h b/include/dt-bindings/clock/s3c2443.h
> deleted file mode 100644
> index a9d2f105d536..000000000000
> diff --git a/include/linux/amba/pl093.h b/include/linux/amba/pl093.h
> deleted file mode 100644
> index b17166e3b49a..000000000000
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
2022-10-21 20:27 ` [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks Arnd Bergmann
` (2 preceding siblings ...)
2022-10-22 14:02 ` Linus Walleij
@ 2022-10-23 11:00 ` Jonathan Cameron
2022-10-23 18:08 ` Daniel Lezcano
` (4 subsequent siblings)
8 siblings, 0 replies; 82+ messages in thread
From: Jonathan Cameron @ 2022-10-23 11:00 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, linux-kernel, Ben Dooks,
Simtec Linux Team, Arnd Bergmann, Alim Akhtar, Daniel Lezcano,
Thomas Gleixner, Lars-Peter Clausen, Sylwester Nawrocki,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Richard Weinberger, Vignesh Raghavendra, Tomasz Figa,
Linus Walleij, Alessandro Zummo, Alexandre Belloni,
Greg Kroah-Hartman, Jiri Slaby, Guenter Roeck, Chanwoo Choi,
Stephen Boyd, linux-samsung-soc, linux-i2c, linux-iio,
linux-media, linux-mmc, linux-mtd, linux-gpio, linux-rtc,
linux-serial, linux-usb, linux-watchdog, linux-clk
On Fri, 21 Oct 2022 22:27:35 +0200
Arnd Bergmann <arnd@kernel.org> wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
> similar symbols that are no longer available with the platform gone,
> though the drivers themselves are still used on newer platforms,
> so remove these hacks.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For the IIO Kconfig change
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
> arch/arm/include/debug/s3c24xx.S | 10 -
> arch/arm/mach-s3c/Makefile | 2 -
> arch/arm/mach-s3c/devs.c | 1 -
> arch/arm/mach-s3c/dma.h | 7 -
> arch/arm/mach-s3c/gpio-samsung.h | 7 -
> arch/arm/mach-s3c/irqs.h | 7 -
> arch/arm/mach-s3c/map.h | 7 -
> arch/arm/mach-s3c/pm-core.h | 7 -
> arch/arm/mach-s3c/regs-clock.h | 7 -
> arch/arm/mach-s3c/regs-gpio.h | 7 -
> arch/arm/mach-s3c/regs-irq.h | 7 -
> drivers/clocksource/Kconfig | 2 +-
> drivers/i2c/busses/Kconfig | 3 +-
> drivers/i2c/busses/i2c-s3c2410.c | 72 -------
> drivers/iio/adc/Kconfig | 6 +-
> .../media/platform/samsung/s3c-camif/Kconfig | 8 +-
> drivers/mmc/host/Kconfig | 5 +-
> drivers/mtd/nand/raw/Kconfig | 2 +-
> drivers/mtd/nand/raw/s3c2410.c | 60 ------
> drivers/pinctrl/samsung/pinctrl-samsung.c | 10 -
> drivers/rtc/Kconfig | 8 +-
> drivers/tty/serial/Kconfig | 8 +-
> drivers/tty/serial/samsung_tty.c | 199 ------------------
> drivers/usb/host/Kconfig | 8 +-
> drivers/watchdog/Kconfig | 9 +-
> drivers/watchdog/s3c2410_wdt.c | 84 +-------
> include/linux/clk/samsung.h | 32 ---
> include/linux/soc/samsung/s3c-pm.h | 58 -----
> 28 files changed, 29 insertions(+), 614 deletions(-)
>
> diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S
> index af873b526677..7ab5e577cd42 100644
> --- a/arch/arm/include/debug/s3c24xx.S
> +++ b/arch/arm/include/debug/s3c24xx.S
> @@ -28,16 +28,6 @@
> and \rd, \rd, #S3C2410_UFSTAT_TXMASK
> .endm
>
> -/* Select the correct implementation depending on the configuration. The
> - * S3C2440 will get selected by default, as these are the most widely
> - * used variants of these
> -*/
> -
> -#if defined(CONFIG_DEBUG_S3C2410_UART)
> -#define fifo_full fifo_full_s3c2410
> -#define fifo_level fifo_level_s3c2410
> -#endif
> -
> /* include the reset of the code which will do the work */
>
> #include <debug/samsung.S>
> diff --git a/arch/arm/mach-s3c/Makefile b/arch/arm/mach-s3c/Makefile
> index e7f18039b149..a5135137e648 100644
> --- a/arch/arm/mach-s3c/Makefile
> +++ b/arch/arm/mach-s3c/Makefile
> @@ -2,9 +2,7 @@
> #
> # Copyright 2009 Simtec Electronics
>
> -ifdef CONFIG_ARCH_S3C64XX
> include $(src)/Makefile.s3c64xx
> -endif
>
> # Objects we always build independent of SoC choice
>
> diff --git a/arch/arm/mach-s3c/devs.c b/arch/arm/mach-s3c/devs.c
> index 9ac07c023adf..a31d1c3038e8 100644
> --- a/arch/arm/mach-s3c/devs.c
> +++ b/arch/arm/mach-s3c/devs.c
> @@ -29,7 +29,6 @@
> #include <linux/sizes.h>
> #include <linux/platform_data/s3c-hsudc.h>
> #include <linux/platform_data/s3c-hsotg.h>
> -#include <linux/platform_data/dma-s3c24xx.h>
>
> #include <linux/platform_data/media/s5p_hdmi.h>
>
> diff --git a/arch/arm/mach-s3c/dma.h b/arch/arm/mach-s3c/dma.h
> index 59a4578c5f00..48057cb90070 100644
> --- a/arch/arm/mach-s3c/dma.h
> +++ b/arch/arm/mach-s3c/dma.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "dma-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "dma-s3c64xx.h"
> -#endif
> diff --git a/arch/arm/mach-s3c/gpio-samsung.h b/arch/arm/mach-s3c/gpio-samsung.h
> index 02f6f4a96862..4233515eddaa 100644
> --- a/arch/arm/mach-s3c/gpio-samsung.h
> +++ b/arch/arm/mach-s3c/gpio-samsung.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "gpio-samsung-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "gpio-samsung-s3c64xx.h"
> -#endif
> diff --git a/arch/arm/mach-s3c/irqs.h b/arch/arm/mach-s3c/irqs.h
> index 0bff1c1c8eb0..3ff0e0963080 100644
> --- a/arch/arm/mach-s3c/irqs.h
> +++ b/arch/arm/mach-s3c/irqs.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "irqs-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "irqs-s3c64xx.h"
> -#endif
> diff --git a/arch/arm/mach-s3c/map.h b/arch/arm/mach-s3c/map.h
> index 7cfb517d4886..778d6f81cb2b 100644
> --- a/arch/arm/mach-s3c/map.h
> +++ b/arch/arm/mach-s3c/map.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "map-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "map-s3c64xx.h"
> -#endif
> diff --git a/arch/arm/mach-s3c/pm-core.h b/arch/arm/mach-s3c/pm-core.h
> index b0e1d277f599..3e0c2df79120 100644
> --- a/arch/arm/mach-s3c/pm-core.h
> +++ b/arch/arm/mach-s3c/pm-core.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "pm-core-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "pm-core-s3c64xx.h"
> -#endif
> diff --git a/arch/arm/mach-s3c/regs-clock.h b/arch/arm/mach-s3c/regs-clock.h
> index 7df31f203d28..fc7e3886b07c 100644
> --- a/arch/arm/mach-s3c/regs-clock.h
> +++ b/arch/arm/mach-s3c/regs-clock.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "regs-clock-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "regs-clock-s3c64xx.h"
> -#endif
> diff --git a/arch/arm/mach-s3c/regs-gpio.h b/arch/arm/mach-s3c/regs-gpio.h
> index 0d41cb76d440..4e08e8609663 100644
> --- a/arch/arm/mach-s3c/regs-gpio.h
> +++ b/arch/arm/mach-s3c/regs-gpio.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "regs-gpio-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "regs-gpio-s3c64xx.h"
> -#endif
> diff --git a/arch/arm/mach-s3c/regs-irq.h b/arch/arm/mach-s3c/regs-irq.h
> index 57f0dda8dbf5..4243daa54bd1 100644
> --- a/arch/arm/mach-s3c/regs-irq.h
> +++ b/arch/arm/mach-s3c/regs-irq.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "regs-irq-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "regs-irq-s3c64xx.h"
> -#endif
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index 4469e7f555e9..fc10ecc3602d 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -441,7 +441,7 @@ config CLKSRC_EXYNOS_MCT
> config CLKSRC_SAMSUNG_PWM
> bool "PWM timer driver for Samsung S3C, S5P" if COMPILE_TEST
> depends on HAS_IOMEM
> - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST
> + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST
> help
> This is a new clocksource driver for the PWM timer found in
> Samsung S3C, S5P and Exynos SoCs, replacing an earlier driver
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index f427c8ea5c7b..84d21e0a7cdf 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -1009,8 +1009,7 @@ config I2C_RZV2M
>
> config I2C_S3C2410
> tristate "S3C/Exynos I2C Driver"
> - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || \
> - ARCH_S5PV210 || COMPILE_TEST
> + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST
> help
> Say Y here to include support for I2C controller in the
> Samsung SoCs (S3C, S5Pv210, Exynos).
> diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
> index 36dab9cd208c..45e9df81345a 100644
> --- a/drivers/i2c/busses/i2c-s3c2410.c
> +++ b/drivers/i2c/busses/i2c-s3c2410.c
> @@ -116,9 +116,6 @@ struct s3c24xx_i2c {
> struct s3c2410_platform_i2c *pdata;
> struct gpio_desc *gpios[2];
> struct pinctrl *pctrl;
> -#if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
> - struct notifier_block freq_transition;
> -#endif
> struct regmap *sysreg;
> unsigned int sys_i2c_cfg;
> };
> @@ -885,65 +882,6 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
> return 0;
> }
>
> -#if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
> -
> -#define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition)
> -
> -static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
> - unsigned long val, void *data)
> -{
> - struct s3c24xx_i2c *i2c = freq_to_i2c(nb);
> - unsigned int got;
> - int delta_f;
> - int ret;
> -
> - delta_f = clk_get_rate(i2c->clk) - i2c->clkrate;
> -
> - /* if we're post-change and the input clock has slowed down
> - * or at pre-change and the clock is about to speed up, then
> - * adjust our clock rate. <0 is slow, >0 speedup.
> - */
> -
> - if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) ||
> - (val == CPUFREQ_PRECHANGE && delta_f > 0)) {
> - i2c_lock_bus(&i2c->adap, I2C_LOCK_ROOT_ADAPTER);
> - ret = s3c24xx_i2c_clockrate(i2c, &got);
> - i2c_unlock_bus(&i2c->adap, I2C_LOCK_ROOT_ADAPTER);
> -
> - if (ret < 0)
> - dev_err(i2c->dev, "cannot find frequency (%d)\n", ret);
> - else
> - dev_info(i2c->dev, "setting freq %d\n", got);
> - }
> -
> - return 0;
> -}
> -
> -static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
> -{
> - i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition;
> -
> - return cpufreq_register_notifier(&i2c->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
> -{
> - cpufreq_unregister_notifier(&i2c->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -#else
> -static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
> -{
> - return 0;
> -}
> -
> -static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
> -{
> -}
> -#endif
> -
> #ifdef CONFIG_OF
> static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
> {
> @@ -1152,13 +1090,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
> }
> }
>
> - ret = s3c24xx_i2c_register_cpufreq(i2c);
> - if (ret < 0) {
> - dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
> - clk_unprepare(i2c->clk);
> - return ret;
> - }
> -
> /*
> * Note, previous versions of the driver used i2c_add_adapter()
> * to add the bus at any number. We now pass the bus number via
> @@ -1175,7 +1106,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
> ret = i2c_add_numbered_adapter(&i2c->adap);
> if (ret < 0) {
> pm_runtime_disable(&pdev->dev);
> - s3c24xx_i2c_deregister_cpufreq(i2c);
> clk_unprepare(i2c->clk);
> return ret;
> }
> @@ -1192,8 +1122,6 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
>
> pm_runtime_disable(&pdev->dev);
>
> - s3c24xx_i2c_deregister_cpufreq(i2c);
> -
> i2c_del_adapter(&i2c->adap);
>
> return 0;
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 791612ca6012..9de7f05d40e2 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -437,11 +437,11 @@ config EP93XX_ADC
>
> config EXYNOS_ADC
> tristate "Exynos ADC driver support"
> - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST)
> + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST)
> depends on HAS_IOMEM
> help
> - Driver for the ADC block found in the Samsung S3C (S3C2410, S3C2416,
> - S3C2440, S3C2443, S3C6410), S5Pv210 and Exynos SoCs.
> + Driver for the ADC block found in the Samsung S3C6410, S5Pv210 and
> + Exynos SoCs.
> Choose Y here only if you build for such Samsung SoC.
>
> To compile this driver as a module, choose M here: the module will be
> diff --git a/drivers/media/platform/samsung/s3c-camif/Kconfig b/drivers/media/platform/samsung/s3c-camif/Kconfig
> index 8cb8d1ac3edc..f359f6382fff 100644
> --- a/drivers/media/platform/samsung/s3c-camif/Kconfig
> +++ b/drivers/media/platform/samsung/s3c-camif/Kconfig
> @@ -1,15 +1,15 @@
> # SPDX-License-Identifier: GPL-2.0-only
> config VIDEO_S3C_CAMIF
> - tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
> + tristate "Samsung 3C64XX SoC Camera Interface driver"
> depends on V4L_PLATFORM_DRIVERS
> depends on VIDEO_DEV && I2C && PM
> - depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST
> + depends on ARCH_S3C64XX || COMPILE_TEST
> select MEDIA_CONTROLLER
> select VIDEO_V4L2_SUBDEV_API
> select VIDEOBUF2_DMA_CONTIG
> help
> - This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
> - host interface (CAMIF).
> + This is a v4l2 driver for s3c64xx SoC series camera host interface
> + (CAMIF).
>
> To compile this driver as a module, choose M here: the module
> will be called s3c-camif.
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 84dd37ff2735..79d8ddf1f616 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -312,9 +312,8 @@ config MMC_SDHCI_S3C
> depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> help
> This selects the Secure Digital Host Controller Interface (SDHCI)
> - often referrered to as the HSMMC block in some of the Samsung S3C
> - (S3C2416, S3C2443, S3C6410), S5Pv210 and Exynos (Exynso4210,
> - Exynos4412) SoCs.
> + often referrered to as the HSMMC block in some of the Samsung
> + S3C6410, S5Pv210 and Exynos (Exynso4210, Exynos4412) SoCs.
>
> If you have a controller with this interface (thereforeyou build for
> such Samsung SoC), say Y or M here.
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index 280a55139387..a347833b8f29 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -79,7 +79,7 @@ config MTD_NAND_NDFC
>
> config MTD_NAND_S3C2410
> tristate "Samsung S3C NAND controller"
> - depends on ARCH_S3C24XX || ARCH_S3C64XX
> + depends on ARCH_S3C64XX
> help
> This enables the NAND flash controller on the S3C24xx and S3C64xx
> SoCs
> diff --git a/drivers/mtd/nand/raw/s3c2410.c b/drivers/mtd/nand/raw/s3c2410.c
> index f0a4535c812a..80d96f94d6cb 100644
> --- a/drivers/mtd/nand/raw/s3c2410.c
> +++ b/drivers/mtd/nand/raw/s3c2410.c
> @@ -166,10 +166,6 @@ struct s3c2410_nand_info {
> enum s3c_nand_clk_state clk_state;
>
> enum s3c_cpu_type cpu_type;
> -
> -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
> - struct notifier_block freq_transition;
> -#endif
> };
>
> struct s3c24XX_nand_devtype_data {
> @@ -711,54 +707,6 @@ static void s3c2440_nand_write_buf(struct nand_chip *this, const u_char *buf,
> }
> }
>
> -/* cpufreq driver support */
> -
> -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
> -
> -static int s3c2410_nand_cpufreq_transition(struct notifier_block *nb,
> - unsigned long val, void *data)
> -{
> - struct s3c2410_nand_info *info;
> - unsigned long newclk;
> -
> - info = container_of(nb, struct s3c2410_nand_info, freq_transition);
> - newclk = clk_get_rate(info->clk);
> -
> - if ((val == CPUFREQ_POSTCHANGE && newclk < info->clk_rate) ||
> - (val == CPUFREQ_PRECHANGE && newclk > info->clk_rate)) {
> - s3c2410_nand_setrate(info);
> - }
> -
> - return 0;
> -}
> -
> -static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
> -{
> - info->freq_transition.notifier_call = s3c2410_nand_cpufreq_transition;
> -
> - return cpufreq_register_notifier(&info->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -static inline void
> -s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
> -{
> - cpufreq_unregister_notifier(&info->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -#else
> -static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
> -{
> - return 0;
> -}
> -
> -static inline void
> -s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
> -{
> -}
> -#endif
> -
> /* device management functions */
>
> static int s3c24xx_nand_remove(struct platform_device *pdev)
> @@ -768,8 +716,6 @@ static int s3c24xx_nand_remove(struct platform_device *pdev)
> if (info == NULL)
> return 0;
>
> - s3c2410_nand_cpufreq_deregister(info);
> -
> /* Release all our mtds and their partitions, then go through
> * freeing the resources used
> */
> @@ -1184,12 +1130,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
> if (err != 0)
> goto exit_error;
>
> - err = s3c2410_nand_cpufreq_register(info);
> - if (err < 0) {
> - dev_err(&pdev->dev, "failed to init cpufreq support\n");
> - goto exit_error;
> - }
> -
> if (allow_clk_suspend(info)) {
> dev_info(&pdev->dev, "clock idle support enabled\n");
> s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
> diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
> index bd13b5ef246d..1a478854293f 100644
> --- a/drivers/pinctrl/samsung/pinctrl-samsung.c
> +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
> @@ -1322,16 +1322,6 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
> #ifdef CONFIG_PINCTRL_S3C64XX
> { .compatible = "samsung,s3c64xx-pinctrl",
> .data = &s3c64xx_of_data },
> -#endif
> -#ifdef CONFIG_PINCTRL_S3C24XX
> - { .compatible = "samsung,s3c2412-pinctrl",
> - .data = &s3c2412_of_data },
> - { .compatible = "samsung,s3c2416-pinctrl",
> - .data = &s3c2416_of_data },
> - { .compatible = "samsung,s3c2440-pinctrl",
> - .data = &s3c2440_of_data },
> - { .compatible = "samsung,s3c2450-pinctrl",
> - .data = &s3c2450_of_data },
> #endif
> {},
> };
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index 312dccfa3f18..d13ca620ea5d 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -1406,18 +1406,14 @@ config RTC_DRV_OMAP
>
> config RTC_DRV_S3C
> tristate "Samsung S3C series SoC RTC"
> - depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S3C24XX || ARCH_S5PV210 || \
> + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || \
> COMPILE_TEST
> help
> RTC (Realtime Clock) driver for the clock inbuilt into the
> - Samsung S3C24XX series of SoCs. This can provide periodic
> + Samsung S3C64XX series of SoCs. This can provide periodic
> interrupt rates from 1Hz to 64Hz for user programs, and
> wakeup from Alarm.
>
> - The driver currently supports the common features on all the
> - S3C24XX range, such as the S3C2410, S3C2412, S3C2413, S3C2440
> - and S3C2442.
> -
> This driver can also be build as a module. If so, the module
> will be called rtc-s3c.
>
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 434f83168546..3ba8a39655a3 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -242,23 +242,23 @@ config SERIAL_SAMSUNG
> select SERIAL_CORE
> help
> Support for the on-chip UARTs on the Samsung
> - S3C24xx/S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing
> + S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing
> /dev/ttySAC0, 1 and 2 (note, some machines may not provide all of
> these ports, depending on how the serial port pins are configured.
> +
> Choose Y/M here only if you build for such SoC.
>
> config SERIAL_SAMSUNG_UARTS_4
> bool
> depends on SERIAL_SAMSUNG
> - default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
> + default y
> help
> Internal node for the common case of 4 Samsung compatible UARTs
>
> config SERIAL_SAMSUNG_UARTS
> int
> depends on SERIAL_SAMSUNG
> - default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
> - default 3
> + default 4
> help
> Select the number of available UART ports for the Samsung S3C
> serial driver
> diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
> index 77d1363029f5..5adf3963b2f6 100644
> --- a/drivers/tty/serial/samsung_tty.c
> +++ b/drivers/tty/serial/samsung_tty.c
> @@ -152,10 +152,6 @@ struct s3c24xx_uart_port {
> const struct s3c2410_uartcfg *cfg;
>
> struct s3c24xx_uart_dma *dma;
> -
> -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
> - struct notifier_block freq_transition;
> -#endif
> };
>
> static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport);
> @@ -1859,93 +1855,6 @@ static void s3c24xx_serial_resetport(struct uart_port *port,
> udelay(1);
> }
>
> -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
> -
> -static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
> - unsigned long val, void *data)
> -{
> - struct s3c24xx_uart_port *port;
> - struct uart_port *uport;
> -
> - port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
> - uport = &port->port;
> -
> - /* check to see if port is enabled */
> -
> - if (port->pm_level != 0)
> - return 0;
> -
> - /* try and work out if the baudrate is changing, we can detect
> - * a change in rate, but we do not have support for detecting
> - * a disturbance in the clock-rate over the change.
> - */
> -
> - if (IS_ERR(port->baudclk))
> - goto exit;
> -
> - if (port->baudclk_rate == clk_get_rate(port->baudclk))
> - goto exit;
> -
> - if (val == CPUFREQ_PRECHANGE) {
> - /* we should really shut the port down whilst the
> - * frequency change is in progress.
> - */
> -
> - } else if (val == CPUFREQ_POSTCHANGE) {
> - struct ktermios *termios;
> - struct tty_struct *tty;
> -
> - if (uport->state == NULL)
> - goto exit;
> -
> - tty = uport->state->port.tty;
> -
> - if (tty == NULL)
> - goto exit;
> -
> - termios = &tty->termios;
> -
> - if (termios == NULL) {
> - dev_warn(uport->dev, "%s: no termios?\n", __func__);
> - goto exit;
> - }
> -
> - s3c24xx_serial_set_termios(uport, termios, NULL);
> - }
> -
> -exit:
> - return 0;
> -}
> -
> -static inline int
> -s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
> -{
> - port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
> -
> - return cpufreq_register_notifier(&port->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -static inline void
> -s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
> -{
> - cpufreq_unregister_notifier(&port->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -#else
> -static inline int
> -s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
> -{
> - return 0;
> -}
> -
> -static inline void
> -s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
> -{
> -}
> -#endif
> -
> static int s3c24xx_serial_enable_baudclk(struct s3c24xx_uart_port *ourport)
> {
> struct device *dev = ourport->port.dev;
> @@ -2237,10 +2146,6 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
> if (!IS_ERR(ourport->baudclk))
> clk_disable_unprepare(ourport->baudclk);
>
> - ret = s3c24xx_serial_cpufreq_register(ourport);
> - if (ret < 0)
> - dev_err(&pdev->dev, "failed to add cpufreq notifier\n");
> -
> probe_index++;
>
> return 0;
> @@ -2251,7 +2156,6 @@ static int s3c24xx_serial_remove(struct platform_device *dev)
> struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
>
> if (port) {
> - s3c24xx_serial_cpufreq_deregister(to_ourport(port));
> uart_remove_one_port(&s3c24xx_uart_drv, port);
> }
>
> @@ -2589,94 +2493,6 @@ static struct console s3c24xx_serial_console = {
> };
> #endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
>
> -#ifdef CONFIG_CPU_S3C2410
> -static const struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
> - .info = {
> - .name = "Samsung S3C2410 UART",
> - .type = TYPE_S3C24XX,
> - .port_type = PORT_S3C2410,
> - .fifosize = 16,
> - .rx_fifomask = S3C2410_UFSTAT_RXMASK,
> - .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
> - .rx_fifofull = S3C2410_UFSTAT_RXFULL,
> - .tx_fifofull = S3C2410_UFSTAT_TXFULL,
> - .tx_fifomask = S3C2410_UFSTAT_TXMASK,
> - .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
> - .def_clk_sel = S3C2410_UCON_CLKSEL0,
> - .num_clks = 2,
> - .clksel_mask = S3C2410_UCON_CLKMASK,
> - .clksel_shift = S3C2410_UCON_CLKSHIFT,
> - },
> - .def_cfg = {
> - .ucon = S3C2410_UCON_DEFAULT,
> - .ufcon = S3C2410_UFCON_DEFAULT,
> - },
> -};
> -#define S3C2410_SERIAL_DRV_DATA (&s3c2410_serial_drv_data)
> -#else
> -#define S3C2410_SERIAL_DRV_DATA NULL
> -#endif
> -
> -#ifdef CONFIG_CPU_S3C2412
> -static const struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
> - .info = {
> - .name = "Samsung S3C2412 UART",
> - .type = TYPE_S3C24XX,
> - .port_type = PORT_S3C2412,
> - .fifosize = 64,
> - .has_divslot = 1,
> - .rx_fifomask = S3C2440_UFSTAT_RXMASK,
> - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
> - .rx_fifofull = S3C2440_UFSTAT_RXFULL,
> - .tx_fifofull = S3C2440_UFSTAT_TXFULL,
> - .tx_fifomask = S3C2440_UFSTAT_TXMASK,
> - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
> - .def_clk_sel = S3C2410_UCON_CLKSEL2,
> - .num_clks = 4,
> - .clksel_mask = S3C2412_UCON_CLKMASK,
> - .clksel_shift = S3C2412_UCON_CLKSHIFT,
> - },
> - .def_cfg = {
> - .ucon = S3C2410_UCON_DEFAULT,
> - .ufcon = S3C2410_UFCON_DEFAULT,
> - },
> -};
> -#define S3C2412_SERIAL_DRV_DATA (&s3c2412_serial_drv_data)
> -#else
> -#define S3C2412_SERIAL_DRV_DATA NULL
> -#endif
> -
> -#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \
> - defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442)
> -static const struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
> - .info = {
> - .name = "Samsung S3C2440 UART",
> - .type = TYPE_S3C24XX,
> - .port_type = PORT_S3C2440,
> - .fifosize = 64,
> - .has_divslot = 1,
> - .rx_fifomask = S3C2440_UFSTAT_RXMASK,
> - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
> - .rx_fifofull = S3C2440_UFSTAT_RXFULL,
> - .tx_fifofull = S3C2440_UFSTAT_TXFULL,
> - .tx_fifomask = S3C2440_UFSTAT_TXMASK,
> - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
> - .def_clk_sel = S3C2410_UCON_CLKSEL2,
> - .num_clks = 4,
> - .clksel_mask = S3C2412_UCON_CLKMASK,
> - .clksel_shift = S3C2412_UCON_CLKSHIFT,
> - .ucon_mask = S3C2440_UCON0_DIVMASK,
> - },
> - .def_cfg = {
> - .ucon = S3C2410_UCON_DEFAULT,
> - .ufcon = S3C2410_UFCON_DEFAULT,
> - },
> -};
> -#define S3C2440_SERIAL_DRV_DATA (&s3c2440_serial_drv_data)
> -#else
> -#define S3C2440_SERIAL_DRV_DATA NULL
> -#endif
> -
> #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
> static const struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
> .info = {
> @@ -2845,15 +2661,6 @@ static const struct s3c24xx_serial_drv_data artpec8_serial_drv_data = {
>
> static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
> {
> - .name = "s3c2410-uart",
> - .driver_data = (kernel_ulong_t)S3C2410_SERIAL_DRV_DATA,
> - }, {
> - .name = "s3c2412-uart",
> - .driver_data = (kernel_ulong_t)S3C2412_SERIAL_DRV_DATA,
> - }, {
> - .name = "s3c2440-uart",
> - .driver_data = (kernel_ulong_t)S3C2440_SERIAL_DRV_DATA,
> - }, {
> .name = "s3c6400-uart",
> .driver_data = (kernel_ulong_t)S3C6400_SERIAL_DRV_DATA,
> }, {
> @@ -2881,12 +2688,6 @@ MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
>
> #ifdef CONFIG_OF
> static const struct of_device_id s3c24xx_uart_dt_match[] = {
> - { .compatible = "samsung,s3c2410-uart",
> - .data = S3C2410_SERIAL_DRV_DATA },
> - { .compatible = "samsung,s3c2412-uart",
> - .data = S3C2412_SERIAL_DRV_DATA },
> - { .compatible = "samsung,s3c2440-uart",
> - .data = S3C2440_SERIAL_DRV_DATA },
> { .compatible = "samsung,s3c6400-uart",
> .data = S3C6400_SERIAL_DRV_DATA },
> { .compatible = "samsung,s5pv210-uart",
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index fb7b603dddf8..8ba4fe9364b1 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -443,12 +443,12 @@ config USB_OHCI_HCD_STI
> STMicroelectronics consumer electronics SoC's.
>
> config USB_OHCI_HCD_S3C2410
> - tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
> - depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST)
> - default y if (ARCH_S3C24XX || ARCH_S3C64XX)
> + tristate "OHCI support for Samsung S3C64xx SoC series"
> + depends on USB_OHCI_HCD && (ARCH_S3C64XX || COMPILE_TEST)
> + default ARCH_S3C64XX
> help
> Enables support for the on-chip OHCI controller on
> - S3C24xx/S3C64xx chips.
> + S3C64xx chips.
>
> config USB_OHCI_HCD_LPC32XX
> tristate "Support for LPC on-chip OHCI USB controller"
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index b64bc49c7f30..eee7df45347a 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -491,14 +491,13 @@ config IXP4XX_WATCHDOG
> Say N if you are unsure.
>
> config S3C2410_WATCHDOG
> - tristate "S3C2410 Watchdog"
> - depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || \
> - COMPILE_TEST
> + tristate "S3C6410/S5Pv210/Exynos Watchdog"
> + depends on ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> select WATCHDOG_CORE
> select MFD_SYSCON if ARCH_EXYNOS
> help
> - Watchdog timer block in the Samsung S3C24xx, S3C64xx, S5Pv210 and
> - Exynos SoCs. This will reboot the system when the timer expires with
> + Watchdog timer block in the Samsung S3C64xx, S5Pv210 and Exynos
> + SoCs. This will reboot the system when the timer expires with
> the watchdog enabled.
>
> The driver is limited by the speed of the system's PCLK
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index d3fc8ed886ff..200ba236a72e 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -562,73 +562,6 @@ static irqreturn_t s3c2410wdt_irq(int irqno, void *param)
> return IRQ_HANDLED;
> }
>
> -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
> -
> -static int s3c2410wdt_cpufreq_transition(struct notifier_block *nb,
> - unsigned long val, void *data)
> -{
> - int ret;
> - struct s3c2410_wdt *wdt = freq_to_wdt(nb);
> -
> - if (!s3c2410wdt_is_running(wdt))
> - goto done;
> -
> - if (val == CPUFREQ_PRECHANGE) {
> - /* To ensure that over the change we don't cause the
> - * watchdog to trigger, we perform an keep-alive if
> - * the watchdog is running.
> - */
> -
> - s3c2410wdt_keepalive(&wdt->wdt_device);
> - } else if (val == CPUFREQ_POSTCHANGE) {
> - s3c2410wdt_stop(&wdt->wdt_device);
> -
> - ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
> - wdt->wdt_device.timeout);
> -
> - if (ret >= 0)
> - s3c2410wdt_start(&wdt->wdt_device);
> - else
> - goto err;
> - }
> -
> -done:
> - return 0;
> -
> - err:
> - dev_err(wdt->dev, "cannot set new value for timeout %d\n",
> - wdt->wdt_device.timeout);
> - return ret;
> -}
> -
> -static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
> -{
> - wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;
> -
> - return cpufreq_register_notifier(&wdt->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
> -{
> - wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;
> -
> - cpufreq_unregister_notifier(&wdt->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -#else
> -
> -static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
> -{
> - return 0;
> -}
> -
> -static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
> -{
> -}
> -#endif
> -
> static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt)
> {
> unsigned int rst_stat;
> @@ -761,12 +694,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> wdt->wdt_device.min_timeout = 1;
> wdt->wdt_device.max_timeout = s3c2410wdt_max_timeout(wdt);
>
> - ret = s3c2410wdt_cpufreq_register(wdt);
> - if (ret < 0) {
> - dev_err(dev, "failed to register cpufreq\n");
> - goto err_src_clk;
> - }
> -
> watchdog_set_drvdata(&wdt->wdt_device, wdt);
>
> /* see if we can actually set the requested timer margin, and if
> @@ -783,7 +710,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> S3C2410_WATCHDOG_DEFAULT_TIME);
> } else {
> dev_err(dev, "failed to use default timeout\n");
> - goto err_cpufreq;
> + goto err_src_clk;
> }
> }
>
> @@ -791,7 +718,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> pdev->name, pdev);
> if (ret != 0) {
> dev_err(dev, "failed to install irq (%d)\n", ret);
> - goto err_cpufreq;
> + goto err_src_clk;
> }
>
> watchdog_set_nowayout(&wdt->wdt_device, nowayout);
> @@ -817,7 +744,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
>
> ret = watchdog_register_device(&wdt->wdt_device);
> if (ret)
> - goto err_cpufreq;
> + goto err_src_clk;
>
> ret = s3c2410wdt_enable(wdt, true);
> if (ret < 0)
> @@ -839,9 +766,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> err_unregister:
> watchdog_unregister_device(&wdt->wdt_device);
>
> - err_cpufreq:
> - s3c2410wdt_cpufreq_deregister(wdt);
> -
> err_src_clk:
> clk_disable_unprepare(wdt->src_clk);
>
> @@ -862,8 +786,6 @@ static int s3c2410wdt_remove(struct platform_device *dev)
>
> watchdog_unregister_device(&wdt->wdt_device);
>
> - s3c2410wdt_cpufreq_deregister(wdt);
> -
> clk_disable_unprepare(wdt->src_clk);
> clk_disable_unprepare(wdt->bus_clk);
>
> diff --git a/include/linux/clk/samsung.h b/include/linux/clk/samsung.h
> index 38b774001712..0cf7aac83439 100644
> --- a/include/linux/clk/samsung.h
> +++ b/include/linux/clk/samsung.h
> @@ -21,36 +21,4 @@ static inline void s3c64xx_clk_init(struct device_node *np,
> bool s3c6400, void __iomem *base) { }
> #endif /* CONFIG_S3C64XX_COMMON_CLK */
>
> -#ifdef CONFIG_S3C2410_COMMON_CLK
> -void s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
> - int current_soc,
> - void __iomem *reg_base);
> -#else
> -static inline void s3c2410_common_clk_init(struct device_node *np,
> - unsigned long xti_f,
> - int current_soc,
> - void __iomem *reg_base) { }
> -#endif /* CONFIG_S3C2410_COMMON_CLK */
> -
> -#ifdef CONFIG_S3C2412_COMMON_CLK
> -void s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
> - unsigned long ext_f, void __iomem *reg_base);
> -#else
> -static inline void s3c2412_common_clk_init(struct device_node *np,
> - unsigned long xti_f,
> - unsigned long ext_f,
> - void __iomem *reg_base) { }
> -#endif /* CONFIG_S3C2412_COMMON_CLK */
> -
> -#ifdef CONFIG_S3C2443_COMMON_CLK
> -void s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
> - int current_soc,
> - void __iomem *reg_base);
> -#else
> -static inline void s3c2443_common_clk_init(struct device_node *np,
> - unsigned long xti_f,
> - int current_soc,
> - void __iomem *reg_base) { }
> -#endif /* CONFIG_S3C2443_COMMON_CLK */
> -
> #endif /* __LINUX_CLK_SAMSUNG_H_ */
> diff --git a/include/linux/soc/samsung/s3c-pm.h b/include/linux/soc/samsung/s3c-pm.h
> index f9164559c99f..5b23d85d20ab 100644
> --- a/include/linux/soc/samsung/s3c-pm.h
> +++ b/include/linux/soc/samsung/s3c-pm.h
> @@ -14,58 +14,10 @@
>
> /* PM debug functions */
>
> -/**
> - * struct pm_uart_save - save block for core UART
> - * @ulcon: Save value for S3C2410_ULCON
> - * @ucon: Save value for S3C2410_UCON
> - * @ufcon: Save value for S3C2410_UFCON
> - * @umcon: Save value for S3C2410_UMCON
> - * @ubrdiv: Save value for S3C2410_UBRDIV
> - *
> - * Save block for UART registers to be held over sleep and restored if they
> - * are needed (say by debug).
> -*/
> -struct pm_uart_save {
> - u32 ulcon;
> - u32 ucon;
> - u32 ufcon;
> - u32 umcon;
> - u32 ubrdiv;
> - u32 udivslot;
> -};
> -
> -#ifdef CONFIG_SAMSUNG_PM_DEBUG
> -/**
> - * s3c_pm_dbg() - low level debug function for use in suspend/resume.
> - * @msg: The message to print.
> - *
> - * This function is used mainly to debug the resume process before the system
> - * can rely on printk/console output. It uses the low-level debugging output
> - * routine printascii() to do its work.
> - */
> -extern void s3c_pm_dbg(const char *msg, ...);
> -
> -#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
> -
> -extern void s3c_pm_save_uarts(bool is_s3c24xx);
> -extern void s3c_pm_restore_uarts(bool is_s3c24xx);
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> -extern void s3c_pm_arch_update_uart(void __iomem *regs,
> - struct pm_uart_save *save);
> -#else
> -static inline void
> -s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
> -{
> -}
> -#endif
> -
> -#else
> #define S3C_PMDBG(fmt...) pr_debug(fmt)
>
> static inline void s3c_pm_save_uarts(bool is_s3c24xx) { }
> static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { }
> -#endif
>
> /* suspend memory checking */
>
> @@ -81,14 +33,4 @@ extern void s3c_pm_check_store(void);
> #define s3c_pm_check_store() do { } while (0)
> #endif
>
> -/* system device subsystems */
> -
> -extern struct bus_type s3c2410_subsys;
> -extern struct bus_type s3c2410a_subsys;
> -extern struct bus_type s3c2412_subsys;
> -extern struct bus_type s3c2416_subsys;
> -extern struct bus_type s3c2440_subsys;
> -extern struct bus_type s3c2442_subsys;
> -extern struct bus_type s3c2443_subsys;
> -
> #endif
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 09/21] pata: remove samsung_cf driver
2022-10-21 20:27 ` [PATCH 09/21] pata: remove samsung_cf driver Arnd Bergmann
@ 2022-10-23 14:35 ` Sergey Shtylyov
2022-10-23 22:41 ` Damien Le Moal
2022-10-24 12:34 ` Krzysztof Kozlowski
2 siblings, 0 replies; 82+ messages in thread
From: Sergey Shtylyov @ 2022-10-23 14:35 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Krzysztof Kozlowski, Damien Le Moal
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Hannes Reinecke, linux-ide
Hello!
On 10/21/22 11:27 PM, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> This device was only used by the smdk6410 board file that is now
> gone, so the driver can be removed as well.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
[...]
MBR, Sergey
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
2022-10-21 20:27 ` [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks Arnd Bergmann
` (3 preceding siblings ...)
2022-10-23 11:00 ` Jonathan Cameron
@ 2022-10-23 18:08 ` Daniel Lezcano
2022-10-24 7:55 ` Miquel Raynal
` (3 subsequent siblings)
8 siblings, 0 replies; 82+ messages in thread
From: Daniel Lezcano @ 2022-10-23 18:08 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Krzysztof Kozlowski
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Thomas Gleixner, Jonathan Cameron,
Lars-Peter Clausen, Sylwester Nawrocki, Mauro Carvalho Chehab,
Ulf Hansson, Miquel Raynal, Richard Weinberger,
Vignesh Raghavendra, Tomasz Figa, Linus Walleij,
Alessandro Zummo, Alexandre Belloni, Greg Kroah-Hartman,
Jiri Slaby, Guenter Roeck, Chanwoo Choi, Stephen Boyd,
linux-samsung-soc, linux-i2c, linux-iio, linux-media, linux-mmc,
linux-mtd, linux-gpio, linux-rtc, linux-serial, linux-usb,
linux-watchdog, linux-clk
On 21/10/2022 22:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
> similar symbols that are no longer available with the platform gone,
> though the drivers themselves are still used on newer platforms,
> so remove these hacks.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 09/21] pata: remove samsung_cf driver
2022-10-21 20:27 ` [PATCH 09/21] pata: remove samsung_cf driver Arnd Bergmann
2022-10-23 14:35 ` Sergey Shtylyov
@ 2022-10-23 22:41 ` Damien Le Moal
2022-10-23 22:43 ` Damien Le Moal
2022-10-24 14:24 ` Arnd Bergmann
2022-10-24 12:34 ` Krzysztof Kozlowski
2 siblings, 2 replies; 82+ messages in thread
From: Damien Le Moal @ 2022-10-23 22:41 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Krzysztof Kozlowski
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Sergey Shtylyov, Hannes Reinecke, linux-ide
On 10/22/22 05:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> This device was only used by the smdk6410 board file that is now
> gone, so the driver can be removed as well.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd,
This patch does not apply to the for-6.2 branch of libata tree. I can fix
that easily, but I am concerned about the fact that this deletes the
header file include/linux/platform_data/ata-samsung_cf.h, which has some
function declarations for gpio used under arch/arm/mach-s3c. So If I apply
this before you queue the other patches for this driver in for-next, we
may endup with build failures. No ?
> ---
> drivers/ata/Kconfig | 10 -
> drivers/ata/Makefile | 1 -
> drivers/ata/pata_samsung_cf.c | 662 -------------------
> include/linux/platform_data/ata-samsung_cf.h | 31 -
> 4 files changed, 704 deletions(-)
> delete mode 100644 drivers/ata/pata_samsung_cf.c
> delete mode 100644 include/linux/platform_data/ata-samsung_cf.h
>
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 6b446cfc3455..3b8cb7a29efd 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -1136,16 +1136,6 @@ config PATA_RZ1000
>
> If unsure, say N.
>
> -config PATA_SAMSUNG_CF
> - tristate "Samsung SoC PATA support"
> - depends on SAMSUNG_DEV_IDE || COMPILE_TEST
> - select PATA_TIMINGS
> - help
> - This option enables basic support for Samsung's S3C/S5P board
> - PATA controllers via the new ATA layer
> -
> - If unsure, say N.
> -
> config PATA_WINBOND_VLB
> tristate "Winbond W83759A VLB PATA support (Experimental)"
> depends on ISA
> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> index 2cca9f500649..4ee5c0761d90 100644
> --- a/drivers/ata/Makefile
> +++ b/drivers/ata/Makefile
> @@ -109,7 +109,6 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
> obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
> obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
> obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
> -obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
>
> obj-$(CONFIG_PATA_PXA) += pata_pxa.o
>
> diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
> deleted file mode 100644
> index aba1536ddd44..000000000000
> diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h
> deleted file mode 100644
> index fccf969dc4da..000000000000
--
Damien Le Moal
Western Digital Research
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 09/21] pata: remove samsung_cf driver
2022-10-23 22:41 ` Damien Le Moal
@ 2022-10-23 22:43 ` Damien Le Moal
2022-10-24 14:24 ` Arnd Bergmann
1 sibling, 0 replies; 82+ messages in thread
From: Damien Le Moal @ 2022-10-23 22:43 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Krzysztof Kozlowski
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Sergey Shtylyov, Hannes Reinecke, linux-ide
On 10/24/22 07:41, Damien Le Moal wrote:
> On 10/22/22 05:27, Arnd Bergmann wrote:
>> From: Arnd Bergmann <arnd@arndb.de>
>>
>> This device was only used by the smdk6410 board file that is now
>> gone, so the driver can be removed as well.
>>
>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>
> Arnd,
>
> This patch does not apply to the for-6.2 branch of libata tree. I can fix
> that easily, but I am concerned about the fact that this deletes the
> header file include/linux/platform_data/ata-samsung_cf.h, which has some
> function declarations for gpio used under arch/arm/mach-s3c. So If I apply
> this before you queue the other patches for this driver in for-next, we
> may endup with build failures. No ?
It may be simpler for you to take this patch ? If yes, then:
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
>
>> ---
>> drivers/ata/Kconfig | 10 -
>> drivers/ata/Makefile | 1 -
>> drivers/ata/pata_samsung_cf.c | 662 -------------------
>> include/linux/platform_data/ata-samsung_cf.h | 31 -
>> 4 files changed, 704 deletions(-)
>> delete mode 100644 drivers/ata/pata_samsung_cf.c
>> delete mode 100644 include/linux/platform_data/ata-samsung_cf.h
>>
>> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
>> index 6b446cfc3455..3b8cb7a29efd 100644
>> --- a/drivers/ata/Kconfig
>> +++ b/drivers/ata/Kconfig
>> @@ -1136,16 +1136,6 @@ config PATA_RZ1000
>>
>> If unsure, say N.
>>
>> -config PATA_SAMSUNG_CF
>> - tristate "Samsung SoC PATA support"
>> - depends on SAMSUNG_DEV_IDE || COMPILE_TEST
>> - select PATA_TIMINGS
>> - help
>> - This option enables basic support for Samsung's S3C/S5P board
>> - PATA controllers via the new ATA layer
>> -
>> - If unsure, say N.
>> -
>> config PATA_WINBOND_VLB
>> tristate "Winbond W83759A VLB PATA support (Experimental)"
>> depends on ISA
>> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
>> index 2cca9f500649..4ee5c0761d90 100644
>> --- a/drivers/ata/Makefile
>> +++ b/drivers/ata/Makefile
>> @@ -109,7 +109,6 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
>> obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
>> obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
>> obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
>> -obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
>>
>> obj-$(CONFIG_PATA_PXA) += pata_pxa.o
>>
>> diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
>> deleted file mode 100644
>> index aba1536ddd44..000000000000
>> diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h
>> deleted file mode 100644
>> index fccf969dc4da..000000000000
>
--
Damien Le Moal
Western Digital Research
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 07/21] power: remove s3c adc battery driver
2022-10-21 20:27 ` [PATCH 07/21] power: remove s3c adc battery driver Arnd Bergmann
@ 2022-10-24 7:28 ` Lee Jones
2022-10-24 7:42 ` Arnd Bergmann
2022-10-24 12:31 ` Krzysztof Kozlowski
2022-10-28 14:18 ` Sebastian Reichel
2 siblings, 1 reply; 82+ messages in thread
From: Lee Jones @ 2022-10-24 7:28 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, Sebastian Reichel,
linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Rob Herring, Greg Kroah-Hartman, Mauro Carvalho Chehab,
Lukas Bulwahn, Joe Perches, Hans de Goede, Linus Walleij,
Luca Ceresoli, linux-pm
On Fri, 21 Oct 2022, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c-adc driver is removed along with the s3c24xx platform,
> so the battery driver is no longer needed either.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> MAINTAINERS | 7 -
> drivers/power/supply/Kconfig | 6 -
> drivers/power/supply/Makefile | 1 -
> drivers/power/supply/s3c_adc_battery.c | 453 -------------------------
> include/linux/s3c_adc_battery.h | 39 ---
> 5 files changed, 506 deletions(-)
> delete mode 100644 drivers/power/supply/s3c_adc_battery.c
> delete mode 100644 include/linux/s3c_adc_battery.h
Any idea why I was Cc'ed on this (and only this) patch?
--
Lee Jones [李琼斯]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 07/21] power: remove s3c adc battery driver
2022-10-24 7:28 ` Lee Jones
@ 2022-10-24 7:42 ` Arnd Bergmann
2022-10-24 7:57 ` Lee Jones
0 siblings, 1 reply; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-24 7:42 UTC (permalink / raw)
To: Lee Jones, Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, Sebastian Reichel,
linux-kernel, Ben Dooks, Simtec Linux Team, Rob Herring,
Greg Kroah-Hartman, Mauro Carvalho Chehab, Lukas Bulwahn,
Joe Perches, Hans de Goede, Linus Walleij, Luca Ceresoli,
linux-pm
On Mon, Oct 24, 2022, at 09:28, Lee Jones wrote:
> On Fri, 21 Oct 2022, Arnd Bergmann wrote:
>
>> From: Arnd Bergmann <arnd@arndb.de>
>>
>> The s3c-adc driver is removed along with the s3c24xx platform,
>> so the battery driver is no longer needed either.
>>
>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>> ---
>> MAINTAINERS | 7 -
>> drivers/power/supply/Kconfig | 6 -
>> drivers/power/supply/Makefile | 1 -
>> drivers/power/supply/s3c_adc_battery.c | 453 -------------------------
>> include/linux/s3c_adc_battery.h | 39 ---
>> 5 files changed, 506 deletions(-)
>> delete mode 100644 drivers/power/supply/s3c_adc_battery.c
>> delete mode 100644 include/linux/s3c_adc_battery.h
>
> Any idea why I was Cc'ed on this (and only this) patch?
Not sure. I use "get_maintainer.pl -i" to generate the list
and try to prune it manually to avoid adding too many
people to Cc. It appears that for this patch I accidentally
included everyone who showed up in the git history for the
maintainers file, rather than the people who touched the
actual driver.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
2022-10-21 20:27 ` [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks Arnd Bergmann
` (4 preceding siblings ...)
2022-10-23 18:08 ` Daniel Lezcano
@ 2022-10-24 7:55 ` Miquel Raynal
2022-10-24 12:26 ` Krzysztof Kozlowski
` (2 subsequent siblings)
8 siblings, 0 replies; 82+ messages in thread
From: Miquel Raynal @ 2022-10-24 7:55 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, linux-kernel, Ben Dooks,
Simtec Linux Team, Arnd Bergmann, Alim Akhtar, Daniel Lezcano,
Thomas Gleixner, Jonathan Cameron, Lars-Peter Clausen,
Sylwester Nawrocki, Mauro Carvalho Chehab, Ulf Hansson,
Richard Weinberger, Vignesh Raghavendra, Tomasz Figa,
Linus Walleij, Alessandro Zummo, Alexandre Belloni,
Greg Kroah-Hartman, Jiri Slaby, Guenter Roeck, Chanwoo Choi,
Stephen Boyd, linux-samsung-soc, linux-i2c, linux-iio,
linux-media, linux-mmc, linux-mtd, linux-gpio, linux-rtc,
linux-serial, linux-usb, linux-watchdog, linux-clk
Hi Arnd,
arnd@kernel.org wrote on Fri, 21 Oct 2022 22:27:35 +0200:
> From: Arnd Bergmann <arnd@arndb.de>
>
> A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
> similar symbols that are no longer available with the platform gone,
> though the drivers themselves are still used on newer platforms,
> so remove these hacks.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Thanks,
Miquèl
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 07/21] power: remove s3c adc battery driver
2022-10-24 7:42 ` Arnd Bergmann
@ 2022-10-24 7:57 ` Lee Jones
0 siblings, 0 replies; 82+ messages in thread
From: Lee Jones @ 2022-10-24 7:57 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Arnd Bergmann, linux-arm-kernel, Krzysztof Kozlowski,
Sebastian Reichel, linux-kernel, Ben Dooks, Simtec Linux Team,
Rob Herring, Greg Kroah-Hartman, Mauro Carvalho Chehab,
Lukas Bulwahn, Joe Perches, Hans de Goede, Linus Walleij,
Luca Ceresoli, linux-pm
On Mon, 24 Oct 2022, Arnd Bergmann wrote:
> On Mon, Oct 24, 2022, at 09:28, Lee Jones wrote:
> > On Fri, 21 Oct 2022, Arnd Bergmann wrote:
> >
> >> From: Arnd Bergmann <arnd@arndb.de>
> >>
> >> The s3c-adc driver is removed along with the s3c24xx platform,
> >> so the battery driver is no longer needed either.
> >>
> >> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> >> ---
> >> MAINTAINERS | 7 -
> >> drivers/power/supply/Kconfig | 6 -
> >> drivers/power/supply/Makefile | 1 -
> >> drivers/power/supply/s3c_adc_battery.c | 453 -------------------------
> >> include/linux/s3c_adc_battery.h | 39 ---
> >> 5 files changed, 506 deletions(-)
> >> delete mode 100644 drivers/power/supply/s3c_adc_battery.c
> >> delete mode 100644 include/linux/s3c_adc_battery.h
> >
> > Any idea why I was Cc'ed on this (and only this) patch?
>
> Not sure. I use "get_maintainer.pl -i" to generate the list
> and try to prune it manually to avoid adding too many
> people to Cc. It appears that for this patch I accidentally
> included everyone who showed up in the git history for the
> maintainers file, rather than the people who touched the
> actual driver.
Understood. Thanks for the explanation.
--
Lee Jones [李琼斯]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 04/21] ARM: s3c: remove adc.c
2022-10-21 20:27 ` [PATCH 04/21] ARM: s3c: remove adc.c Arnd Bergmann
@ 2022-10-24 11:37 ` Mark Brown
2022-10-24 12:27 ` Krzysztof Kozlowski
1 sibling, 0 replies; 82+ messages in thread
From: Mark Brown @ 2022-10-24 11:37 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, linux-kernel, Ben Dooks,
Simtec Linux Team, Arnd Bergmann, Alim Akhtar, Linus Walleij,
Uwe Kleine-König, Tomasz Figa, linux-samsung-soc, patches
[-- Attachment #1.1: Type: text/plain, Size: 278 bytes --]
On Fri, Oct 21, 2022 at 10:27:37PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> This driver could not be enabled on s3c64xx for a long time
> because of the ARCH_MULTIPLATFORM dependency, so remove it.
Acked-by: Mark Brown <broonie@kernel.org>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 05/21] ARM: s3c: simplify platform code
2022-10-21 20:27 ` [PATCH 05/21] ARM: s3c: simplify platform code Arnd Bergmann
@ 2022-10-24 11:41 ` Mark Brown
2022-10-24 12:29 ` Krzysztof Kozlowski
1 sibling, 0 replies; 82+ messages in thread
From: Mark Brown @ 2022-10-24 11:41 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, Mauro Carvalho Chehab,
linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Juerg Haefliger, Linus Walleij, Tomasz Figa,
Heiko Stuebner, linux-samsung-soc, linux-media
[-- Attachment #1.1: Type: text/plain, Size: 327 bytes --]
On Fri, Oct 21, 2022 at 10:27:38PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> Following down the now unused symbols and header files, some additional
> content can be dropped that is used by neither the s3c64xx DT support
> nor the crag6410 board.
Acked-by: Mark Brown <broonie@kernel.org>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 17/21] input: remove s3c24xx touchscreen driver
2022-10-21 20:27 ` [PATCH 17/21] input: remove s3c24xx touchscreen driver Arnd Bergmann
@ 2022-10-24 11:57 ` Dmitry Torokhov
2022-10-24 12:50 ` Krzysztof Kozlowski
1 sibling, 0 replies; 82+ messages in thread
From: Dmitry Torokhov @ 2022-10-24 11:57 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, linux-kernel, Ben Dooks,
Simtec Linux Team, Arnd Bergmann, Alim Akhtar, linux-input,
linux-samsung-soc
On Fri, Oct 21, 2022 at 10:27:50PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx SoC support and its adc driver was removed, so this driver
> has no remaining users.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Thanks.
--
Dmitry
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 01/21] ARM: s3c: remove all s3c24xx support
2022-10-21 20:27 ` [PATCH 01/21] ARM: s3c: remove all s3c24xx support Arnd Bergmann
2022-10-22 20:56 ` Heiko Stübner
@ 2022-10-24 12:25 ` Krzysztof Kozlowski
2022-10-27 23:10 ` Stephen Boyd
2 siblings, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:25 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Arnaud Patard, Christer Weinigel, Guillaume GOURAT,
Heiko Stuebner, openmoko-kernel, Jonathan Corbet, Alim Akhtar,
Olof Johansson, soc, Rob Herring, Sylwester Nawrocki,
Tomasz Figa, Chanwoo Choi, Michael Turquette, Stephen Boyd,
linux-doc, linux-samsung-soc, devicetree, linux-stm32, linux-clk
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark
> as deprecated and schedule removal") and can be removed. This includes
> all files that are exclusively for s3c24xx and not shared with s3c64xx,
> as well as the glue logic in Kconfig and the maintainer file entries.
>
> Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
> Cc: Ben Dooks <ben-linux@fluff.org>
> Cc: Christer Weinigel <christer@weinigel.se>
> Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv>
> Cc: Heiko Stuebner <heiko@sntech.de>
> Cc: Simtec Linux Team <linux@simtec.co.uk>
> Cc: openmoko-kernel@lists.openmoko.org
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
2022-10-21 20:27 ` [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks Arnd Bergmann
` (5 preceding siblings ...)
2022-10-24 7:55 ` Miquel Raynal
@ 2022-10-24 12:26 ` Krzysztof Kozlowski
2022-10-24 16:53 ` Ulf Hansson
2022-10-27 23:10 ` Stephen Boyd
8 siblings, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:26 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Daniel Lezcano, Thomas Gleixner, Jonathan Cameron,
Lars-Peter Clausen, Sylwester Nawrocki, Mauro Carvalho Chehab,
Ulf Hansson, Miquel Raynal, Richard Weinberger,
Vignesh Raghavendra, Tomasz Figa, Linus Walleij,
Alessandro Zummo, Alexandre Belloni, Greg Kroah-Hartman,
Jiri Slaby, Guenter Roeck, Chanwoo Choi, Stephen Boyd,
linux-samsung-soc, linux-i2c, linux-iio, linux-media, linux-mmc,
linux-mtd, linux-gpio, linux-rtc, linux-serial, linux-usb,
linux-watchdog, linux-clk
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
> similar symbols that are no longer available with the platform gone,
> though the drivers themselves are still used on newer platforms,
> so remove these hacks.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 03/21] ARM: s3c: remove most s3c64xx board support
2022-10-21 20:27 ` [PATCH 03/21] ARM: s3c: remove most s3c64xx board support Arnd Bergmann
@ 2022-10-24 12:26 ` Krzysztof Kozlowski
0 siblings, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:26 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Kwangwoo Lee, Peter Korsgaard, Darius Augulis, Maurus Cuelenaere,
Alim Akhtar, Heiko Stuebner, Juerg Haefliger, Sam Protsenko,
linux-samsung-soc
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> All traditional board files except for MACH_WLF_CRAGG_6410 were
> marked as unused, so remove them now.
>
> Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com>
> Cc: Peter Korsgaard <jacmet@sunsite.dk>
> Cc: Darius Augulis <augulis.darius@gmail.com>
> Cc: Maurus Cuelenaere <mcuelenaere@gmail.com>
> Cc: Ben Dooks <ben-linux@fluff.org>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 04/21] ARM: s3c: remove adc.c
2022-10-21 20:27 ` [PATCH 04/21] ARM: s3c: remove adc.c Arnd Bergmann
2022-10-24 11:37 ` Mark Brown
@ 2022-10-24 12:27 ` Krzysztof Kozlowski
1 sibling, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:27 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Linus Walleij, Uwe Kleine-König, Tomasz Figa,
Mark Brown, linux-samsung-soc, patches
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> This driver could not be enabled on s3c64xx for a long time
> because of the ARCH_MULTIPLATFORM dependency, so remove it.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 05/21] ARM: s3c: simplify platform code
2022-10-21 20:27 ` [PATCH 05/21] ARM: s3c: simplify platform code Arnd Bergmann
2022-10-24 11:41 ` Mark Brown
@ 2022-10-24 12:29 ` Krzysztof Kozlowski
2022-10-24 13:32 ` Arnd Bergmann
1 sibling, 1 reply; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:29 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Mauro Carvalho Chehab
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Mark Brown, Juerg Haefliger, Linus Walleij,
Tomasz Figa, Heiko Stuebner, linux-samsung-soc, linux-media
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> Following down the now unused symbols and header files, some additional
> content can be dropped that is used by neither the s3c64xx DT support
> nor the crag6410 board.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> arch/arm/mach-s3c/Kconfig | 50 --
> arch/arm/mach-s3c/Kconfig.s3c64xx | 5 -
> arch/arm/mach-s3c/Makefile | 2 -
> arch/arm/mach-s3c/Makefile.s3c64xx | 1 -
> arch/arm/mach-s3c/adc-core.h | 24 -
> arch/arm/mach-s3c/ata-core-s3c64xx.h | 24 -
> arch/arm/mach-s3c/backlight-s3c64xx.h | 22 -
> arch/arm/mach-s3c/cpu.h | 47 --
> arch/arm/mach-s3c/dev-audio-s3c64xx.c | 127 ----
> arch/arm/mach-s3c/devs.c | 725 -------------------
> arch/arm/mach-s3c/devs.h | 37 -
> arch/arm/mach-s3c/dma-s3c64xx.h | 57 --
> arch/arm/mach-s3c/dma.h | 2 -
> arch/arm/mach-s3c/gpio-cfg-helpers.h | 124 ----
> arch/arm/mach-s3c/gpio-cfg.h | 19 -
> arch/arm/mach-s3c/gpio-core.h | 3 -
> arch/arm/mach-s3c/gpio-samsung.c | 443 +----------
> arch/arm/mach-s3c/iic-core.h | 7 -
> arch/arm/mach-s3c/init.c | 26 +-
> arch/arm/mach-s3c/map-s3c.h | 37 -
> arch/arm/mach-s3c/onenand-core-s3c64xx.h | 32 -
> arch/arm/mach-s3c/otom.h | 25 -
> arch/arm/mach-s3c/pm-core-s3c64xx.h | 17 -
> arch/arm/mach-s3c/pm-s3c64xx.c | 83 ---
> arch/arm/mach-s3c/pm.c | 7 +-
> arch/arm/mach-s3c/pm.h | 12 -
> arch/arm/mach-s3c/regs-srom-s3c64xx.h | 55 --
> arch/arm/mach-s3c/s3c6400.c | 6 -
> arch/arm/mach-s3c/s3c6410.c | 9 -
> arch/arm/mach-s3c/sdhci.h | 25 -
> arch/arm/mach-s3c/setup-ide-s3c64xx.c | 40 -
> arch/arm/mach-s3c/sleep-s3c64xx.S | 27 -
> include/linux/platform_data/media/s5p_hdmi.h | 32 -
> 33 files changed, 6 insertions(+), 2146 deletions(-)
> delete mode 100644 arch/arm/mach-s3c/adc-core.h
> delete mode 100644 arch/arm/mach-s3c/ata-core-s3c64xx.h
> delete mode 100644 arch/arm/mach-s3c/backlight-s3c64xx.h
> delete mode 100644 arch/arm/mach-s3c/dma-s3c64xx.h
> delete mode 100644 arch/arm/mach-s3c/dma.h
> delete mode 100644 arch/arm/mach-s3c/onenand-core-s3c64xx.h
> delete mode 100644 arch/arm/mach-s3c/otom.h
> delete mode 100644 arch/arm/mach-s3c/regs-srom-s3c64xx.h
> delete mode 100644 arch/arm/mach-s3c/setup-ide-s3c64xx.c
> delete mode 100644 include/linux/platform_data/media/s5p_hdmi.h
>
> diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig
> index 0dde4010aa64..b3656109f1f7 100644
> --- a/arch/arm/mach-s3c/Kconfig
> +++ b/arch/arm/mach-s3c/Kconfig
> @@ -90,36 +90,6 @@ config S3C_DEV_I2C1
> help
> Compile in platform device definitions for I2C channel 1
>
> -config S3C_DEV_I2C2
> - bool
> - help
> - Compile in platform device definitions for I2C channel 2
> -
> -config S3C_DEV_I2C3
> - bool
> - help
> - Compile in platform device definition for I2C controller 3
> -
> -config S3C_DEV_I2C4
> - bool
> - help
> - Compile in platform device definition for I2C controller 4
> -
> -config S3C_DEV_I2C5
> - bool
> - help
> - Compile in platform device definition for I2C controller 5
> -
> -config S3C_DEV_I2C6
> - bool
> - help
> - Compile in platform device definition for I2C controller 6
> -
> -config S3C_DEV_I2C7
> - bool
> - help
> - Compile in platform device definition for I2C controller 7
> -
> config S3C_DEV_FB
> bool
> help
> @@ -135,26 +105,6 @@ config S3C_DEV_USB_HSOTG
> help
> Compile in platform device definition for USB high-speed OtG
>
> -config S3C_DEV_WDT
> - bool
> - help
> - Compile in platform device definition for Watchdog Timer
> -
> -config S3C_DEV_NAND
> - bool
> - help
> - Compile in platform device definition for NAND controller
> -
> -config S3C_DEV_ONENAND
> - bool
> - help
> - Compile in platform device definition for OneNAND controller
> -
> -config S3C_DEV_RTC
> - bool
> - help
> - Compile in platform device definition for RTC
> -
> config S3C64XX_DEV_SPI0
> bool
> help
> diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
> index c403d7642f0a..c52c7ce1d8fa 100644
> --- a/arch/arm/mach-s3c/Kconfig.s3c64xx
> +++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
> @@ -15,12 +15,9 @@ menuconfig ARCH_S3C64XX
> select HAVE_TCM
> select PLAT_SAMSUNG
> select PM_GENERIC_DOMAINS if PM
> - select S3C_DEV_NAND if ATAGS
> select S3C_GPIO_TRACK if ATAGS
> - select S3C2410_WATCHDOG
This does not seem right. S3C2410_WATCHDOG is a driver used by all
(including Exynos) platforms.
> select SAMSUNG_ATAGS if ATAGS
> select SAMSUNG_WAKEMASK if PM
> - select WATCHDOG
> help
> Samsung S3C64XX series based systems
>
> @@ -121,10 +118,8 @@ config MACH_WLF_CRAGG_6410
> select S3C_DEV_HSMMC1
> select S3C_DEV_HSMMC2
> select S3C_DEV_I2C1
> - select S3C_DEV_RTC
This as well.
> select S3C_DEV_USB_HOST
> select S3C_DEV_USB_HSOTG
> - select S3C_DEV_WDT
> select SAMSUNG_DEV_KEYPAD
> select SAMSUNG_DEV_PWM
> help
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 06/21] ARM: s3c: remove s3c6400 support
2022-10-21 20:27 ` [PATCH 06/21] ARM: s3c: remove s3c6400 support Arnd Bergmann
@ 2022-10-24 12:30 ` Krzysztof Kozlowski
0 siblings, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:30 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Heiko Stuebner, Tomasz Figa, linux-samsung-soc
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> No board file and no dts file references the s3c6400 now, it's only
> s3c6410, so remove the final bits as well.
>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 07/21] power: remove s3c adc battery driver
2022-10-21 20:27 ` [PATCH 07/21] power: remove s3c adc battery driver Arnd Bergmann
2022-10-24 7:28 ` Lee Jones
@ 2022-10-24 12:31 ` Krzysztof Kozlowski
2022-10-28 14:18 ` Sebastian Reichel
2 siblings, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:31 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Sebastian Reichel
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Rob Herring, Greg Kroah-Hartman, Mauro Carvalho Chehab,
Lukas Bulwahn, Joe Perches, Hans de Goede, Linus Walleij,
Luca Ceresoli, Lee Jones, linux-pm
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c-adc driver is removed along with the s3c24xx platform,
> so the battery driver is no longer needed either.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 08/21] hwmon: remove s3c driver
2022-10-21 20:27 ` [PATCH 08/21] hwmon: remove s3c driver Arnd Bergmann
2022-10-22 4:02 ` Guenter Roeck
@ 2022-10-24 12:31 ` Krzysztof Kozlowski
1 sibling, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:31 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Jean Delvare, Guenter Roeck
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann, linux-hwmon
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c adc driver was removed along with the s3c24xx platform, so the
> hwmon driver is orphaned and can be removed.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 09/21] pata: remove samsung_cf driver
2022-10-21 20:27 ` [PATCH 09/21] pata: remove samsung_cf driver Arnd Bergmann
2022-10-23 14:35 ` Sergey Shtylyov
2022-10-23 22:41 ` Damien Le Moal
@ 2022-10-24 12:34 ` Krzysztof Kozlowski
2 siblings, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:34 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Damien Le Moal
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Sergey Shtylyov, Hannes Reinecke, linux-ide
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> This device was only used by the smdk6410 board file that is now
> gone, so the driver can be removed as well.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> drivers/ata/Kconfig | 10 -
> drivers/ata/Makefile | 1 -
> drivers/ata/pata_samsung_cf.c | 662 -------------------
> include/linux/platform_data/ata-samsung_cf.h | 31 -
> 4 files changed, 704 deletions(-)
> delete mode 100644 drivers/ata/pata_samsung_cf.c
> delete mode 100644 include/linux/platform_data/ata-samsung_cf.h
>
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 6b446cfc3455..3b8cb7a29efd 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -1136,16 +1136,6 @@ config PATA_RZ1000
>
> If unsure, say N.
>
> -config PATA_SAMSUNG_CF
> - tristate "Samsung SoC PATA support"
> - depends on SAMSUNG_DEV_IDE || COMPILE_TEST
> - select PATA_TIMINGS
> - help
> - This option enables basic support for Samsung's S3C/S5P board
> - PATA controllers via the new ATA layer
> -
This driver is present and somehow usable on newer platform: S5PV210.
It's not converted to DT, but someone might want to do it. OTOH, if no
one added DT for all this time, I doubt anyone will.
Postmarket/Lineage-folks target smartphones, so don't use it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 10/21] mmc: remove s3cmci driver
2022-10-21 20:27 ` [PATCH 10/21] mmc: remove s3cmci driver Arnd Bergmann
@ 2022-10-24 12:35 ` Krzysztof Kozlowski
2022-10-24 16:52 ` Ulf Hansson
1 sibling, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:35 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Ulf Hansson
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-mmc, linux-samsung-soc
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform is gone, so this driver can be removed as well.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 11/21] clk: remove s3c24xx driver
2022-10-21 20:27 ` [PATCH 11/21] clk: remove s3c24xx driver Arnd Bergmann
2022-10-22 11:50 ` Chanwoo Choi
@ 2022-10-24 12:37 ` Krzysztof Kozlowski
2022-10-27 23:11 ` Stephen Boyd
2 siblings, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:37 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Sylwester Nawrocki, Tomasz Figa,
Chanwoo Choi, Michael Turquette, Stephen Boyd
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-samsung-soc, linux-clk
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform is gone, so the clk driver can be removed as
> well.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 12/21] leds: remove s3c24xx driver
2022-10-21 20:27 ` [PATCH 12/21] leds: " Arnd Bergmann
2022-10-22 10:04 ` Pavel Machek
@ 2022-10-24 12:37 ` Krzysztof Kozlowski
1 sibling, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:37 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Pavel Machek
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Andy Shevchenko, Sven Schwermer, linux-leds,
linux-samsung-soc
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform is gone, so the led driver can be
> removed as well.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 13/21] usb: gadget: remove s3c24xx drivers
2022-10-21 20:27 ` [PATCH 13/21] usb: gadget: remove s3c24xx drivers Arnd Bergmann
@ 2022-10-24 12:39 ` Krzysztof Kozlowski
0 siblings, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:39 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Felipe Balbi, Greg Kroah-Hartman
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-usb, linux-samsung-soc
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform is gone, so both the udc and hsudc drivers
> can be removed as well.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 14/21] dmaengine: remove s3c24xx driver
2022-10-21 20:27 ` [PATCH 14/21] dmaengine: remove s3c24xx driver Arnd Bergmann
@ 2022-10-24 12:40 ` Krzysztof Kozlowski
2022-11-04 14:14 ` Vinod Koul
1 sibling, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:40 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Vinod Koul
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, dmaengine, linux-samsung-soc
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform was removed and this driver is no longer
> needed.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 15/21] cpufreq: remove s3c24xx drivers
2022-10-21 20:27 ` [PATCH 15/21] cpufreq: remove s3c24xx drivers Arnd Bergmann
@ 2022-10-24 12:40 ` Krzysztof Kozlowski
2022-10-25 5:19 ` Viresh Kumar
1 sibling, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:40 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Rafael J. Wysocki, Viresh Kumar
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-pm, linux-samsung-soc
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> All s3c24xx platforms were removed, so these five drivers are all
> obsolete now.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 16/21] fbdev: remove s3c2410 framebuffer
2022-10-21 20:27 ` [PATCH 16/21] fbdev: remove s3c2410 framebuffer Arnd Bergmann
@ 2022-10-24 12:49 ` Krzysztof Kozlowski
0 siblings, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:49 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Helge Deller
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-fbdev, dri-devel, linux-samsung-soc
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform was removed, so the framebuffer driver is no longer
> needed.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 17/21] input: remove s3c24xx touchscreen driver
2022-10-21 20:27 ` [PATCH 17/21] input: remove s3c24xx touchscreen driver Arnd Bergmann
2022-10-24 11:57 ` Dmitry Torokhov
@ 2022-10-24 12:50 ` Krzysztof Kozlowski
2022-10-24 13:02 ` Arnd Bergmann
1 sibling, 1 reply; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:50 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Dmitry Torokhov
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-input, linux-samsung-soc
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx SoC support and its adc driver was removed, so this driver
> has no remaining users.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> drivers/input/touchscreen/Kconfig | 12 -
> drivers/input/touchscreen/Makefile | 1 -
> drivers/input/touchscreen/s3c2410_ts.c | 464 -------------------------
> 3 files changed, 477 deletions(-)
This also could be usable on S3C64xx, but it seems no one added any DT
nodes, so:
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 18/21] pinctrl: remove s3c24xx driver
2022-10-21 20:27 ` [PATCH 18/21] pinctrl: remove s3c24xx driver Arnd Bergmann
2022-10-21 21:25 ` Linus Walleij
@ 2022-10-24 12:51 ` Krzysztof Kozlowski
1 sibling, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:51 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Tomasz Figa, Sylwester Nawrocki,
Linus Walleij
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Andy Shevchenko, linux-samsung-soc, linux-gpio
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform was removed, so this driver has no
> remaining users.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 19/21] spi: remove s3c24xx driver
2022-10-21 20:27 ` [PATCH 19/21] spi: " Arnd Bergmann
@ 2022-10-24 12:52 ` Krzysztof Kozlowski
0 siblings, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:52 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Mark Brown, Andi Shyti
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-spi, linux-samsung-soc
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform was removed,s o there are no remaining users
> for its spi driver.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 20/21] soc: s3c: remove pm-debug hack
2022-10-21 20:27 ` [PATCH 20/21] soc: s3c: remove pm-debug hack Arnd Bergmann
@ 2022-10-24 12:52 ` Krzysztof Kozlowski
0 siblings, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:52 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Sam Protsenko, Chanho Park, linux-samsung-soc
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> CONFIG_SAMSUNG_PM_DEBUG was only used on s3c24xx because of the
> DEBUG_S3C24XX_UART dependency. Since s3c24xx is now gone, and nobody
> ever noticed this option being missing from s3c64xx, it can be safely
> removed as well.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 21/21] ASoC: samsung: remove unused drivers
2022-10-21 20:27 ` [PATCH 21/21] ASoC: samsung: remove unused drivers Arnd Bergmann
@ 2022-10-24 12:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 12:53 UTC (permalink / raw)
To: Arnd Bergmann, linux-arm-kernel, Jaroslav Kysela, Takashi Iwai,
Sylwester Nawrocki, Liam Girdwood, Mark Brown
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Charles Keepax, linux-samsung-soc, alsa-devel
On 21/10/2022 16:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx SoC platform was completely removed, as were most of the
> s3c64xx based board files, leaving only the DT based machines as well
> as the MACH_WLF_CRAGG_6410 machine. All other board specific ASoC
> driver can can now be recycled.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 00/21] ARM: s3c: clean out obsolete platforms
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
` (21 preceding siblings ...)
2022-10-22 15:18 ` [PATCH 00/21] ARM: s3c: clean out obsolete platforms Krzysztof Kozlowski
@ 2022-10-24 13:00 ` Rob Herring
2022-10-24 13:18 ` Arnd Bergmann
22 siblings, 1 reply; 82+ messages in thread
From: Rob Herring @ 2022-10-24 13:00 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, linux-kernel, Ben Dooks,
Simtec Linux Team, Arnd Bergmann, linux-doc, linux-samsung-soc,
devicetree, patches, linux-stm32, linux-ide, linux-clk, linux-pm,
dmaengine, linux-hwmon, linux-i2c, linux-iio, linux-input,
linux-leds, linux-media, linux-mmc, linux-mtd, linux-gpio,
linux-rtc, linux-spi, linux-serial, linux-usb, linux-fbdev,
dri-devel, linux-watchdog, alsa-devel, linux-pwm
On Fri, Oct 21, 2022 at 10:22:28PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform was marked as deprecated a while ago,
> and for the s3c64xx platform, we marked all except one legacy
> board file as unused.
>
> This series removes all of those, leaving only s3c64xx support
> for DT based boots as well as the cragg6410 board file.
>
> About half of the s3c specific drivers were only used on
> the now removed machines, so these drivers can be retired
> as well. I can either merge the driver removal patches through
> the soc tree along with the board file patches, or subsystem
> maintainers can pick them up into their own trees, whichever
> they prefer.
[...]
> Documentation/arm/index.rst | 1 -
> Documentation/arm/samsung-s3c24xx/cpufreq.rst | 77 -
> .../arm/samsung-s3c24xx/eb2410itx.rst | 59 -
> Documentation/arm/samsung-s3c24xx/gpio.rst | 172 --
> Documentation/arm/samsung-s3c24xx/h1940.rst | 41 -
> Documentation/arm/samsung-s3c24xx/index.rst | 20 -
> Documentation/arm/samsung-s3c24xx/nand.rst | 30 -
> .../arm/samsung-s3c24xx/overview.rst | 311 ---
> Documentation/arm/samsung-s3c24xx/s3c2412.rst | 121 -
> Documentation/arm/samsung-s3c24xx/s3c2413.rst | 22 -
> .../arm/samsung-s3c24xx/smdk2440.rst | 57 -
> Documentation/arm/samsung-s3c24xx/suspend.rst | 137 --
> .../arm/samsung-s3c24xx/usb-host.rst | 91 -
> Documentation/arm/samsung/overview.rst | 13 -
What about?:
Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt
Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt
Documentation/devicetree/bindings/usb/s3c2410-usb.txt
Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 17/21] input: remove s3c24xx touchscreen driver
2022-10-24 12:50 ` Krzysztof Kozlowski
@ 2022-10-24 13:02 ` Arnd Bergmann
0 siblings, 0 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-24 13:02 UTC (permalink / raw)
To: Krzysztof Kozlowski, Arnd Bergmann, linux-arm-kernel, Dmitry Torokhov
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Alim Akhtar,
linux-input, linux-samsung-soc
On Mon, Oct 24, 2022, at 14:50, Krzysztof Kozlowski wrote:
> On 21/10/2022 16:27, Arnd Bergmann wrote:
>> From: Arnd Bergmann <arnd@arndb.de>
>>
>> The s3c24xx SoC support and its adc driver was removed, so this driver
>> has no remaining users.
>>
>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>> ---
>> drivers/input/touchscreen/Kconfig | 12 -
>> drivers/input/touchscreen/Makefile | 1 -
>> drivers/input/touchscreen/s3c2410_ts.c | 464 -------------------------
>> 3 files changed, 477 deletions(-)
>
> This also could be usable on S3C64xx, but it seems no one added any DT
> nodes, so:
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Thanks. To clarify, the key bit here is the 'depends on S3C_ADC',
and that driver in turn 'depends on !ARCH_MULTIPLATFORM' since
2014. So even for the boardfile variant of s3c64xx, it was
already impossible to use for a long time without anyone complaining
or trying to fix it.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 00/21] ARM: s3c: clean out obsolete platforms
2022-10-24 13:00 ` Rob Herring
@ 2022-10-24 13:18 ` Arnd Bergmann
0 siblings, 0 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-24 13:18 UTC (permalink / raw)
To: Rob Herring, Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, linux-kernel, Ben Dooks,
Simtec Linux Team, linux-doc, linux-samsung-soc, devicetree,
patches, linux-stm32, linux-ide, linux-clk, linux-pm, dmaengine,
linux-hwmon, linux-i2c, linux-iio, linux-input, linux-leds,
linux-media, linux-mmc @ vger . kernel . org, linux-mtd,
open list:GPIO SUBSYSTEM, linux-rtc, linux-spi, linux-serial,
linux-usb, linux-fbdev, dri-devel, linux-watchdog, alsa-devel,
linux-pwm
On Mon, Oct 24, 2022, at 15:00, Rob Herring wrote:
> On Fri, Oct 21, 2022 at 10:22:28PM +0200, Arnd Bergmann wrote:
>> From: Arnd Bergmann <arnd@arndb.de>
>>
>> The s3c24xx platform was marked as deprecated a while ago,
>> and for the s3c64xx platform, we marked all except one legacy
>> board file as unused.
>>
>> This series removes all of those, leaving only s3c64xx support
>> for DT based boots as well as the cragg6410 board file.
>>
>> About half of the s3c specific drivers were only used on
>> the now removed machines, so these drivers can be retired
>> as well. I can either merge the driver removal patches through
>> the soc tree along with the board file patches, or subsystem
>> maintainers can pick them up into their own trees, whichever
>> they prefer.
>
> [...]
>
>> Documentation/arm/index.rst | 1 -
>> Documentation/arm/samsung-s3c24xx/cpufreq.rst | 77 -
>> .../arm/samsung-s3c24xx/eb2410itx.rst | 59 -
>> Documentation/arm/samsung-s3c24xx/gpio.rst | 172 --
>> Documentation/arm/samsung-s3c24xx/h1940.rst | 41 -
>> Documentation/arm/samsung-s3c24xx/index.rst | 20 -
>> Documentation/arm/samsung-s3c24xx/nand.rst | 30 -
>> .../arm/samsung-s3c24xx/overview.rst | 311 ---
>> Documentation/arm/samsung-s3c24xx/s3c2412.rst | 121 -
>> Documentation/arm/samsung-s3c24xx/s3c2413.rst | 22 -
>> .../arm/samsung-s3c24xx/smdk2440.rst | 57 -
>> Documentation/arm/samsung-s3c24xx/suspend.rst | 137 --
>> .../arm/samsung-s3c24xx/usb-host.rst | 91 -
>> Documentation/arm/samsung/overview.rst | 13 -
>
> What about?:
>
> Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
> Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt
> Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
Good catch!
I've removed these three now and and will add the removal to
the same patch, also the related
samsung,s3c2412-clock.txt and samsung,s3c2443-clock.txt
files.
> Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt
samsung,s3c2412-nand is apparently still used on s3c6400,
and the driver is selectable on that platform, so I think
that should remain in there until we remove s3c64xx in 2024,
even if it is not referenced by the dts files in the kernel.
> Documentation/devicetree/bindings/usb/s3c2410-usb.txt
Similarly, the driver is used on the crag6410 board
(without DT), and probably just works with the DT based
boards if one adds a node to s3c64xx.dtsi.
I've also checked if any of the other removed drivers
matches of_device_id[] strings to see if there are more
bindings to kill off, but I don't see any that have
now become obsolete. It did point me to pxa2xx_ac97_dt_ids,
which Robert already complained about, this apparently
is still used with dts files outside of mainline.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 05/21] ARM: s3c: simplify platform code
2022-10-24 12:29 ` Krzysztof Kozlowski
@ 2022-10-24 13:32 ` Arnd Bergmann
2022-10-24 14:13 ` Krzysztof Kozlowski
0 siblings, 1 reply; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-24 13:32 UTC (permalink / raw)
To: Krzysztof Kozlowski, Arnd Bergmann, linux-arm-kernel,
Mauro Carvalho Chehab
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Alim Akhtar,
Mark Brown, Juerg Haefliger, Linus Walleij, Tomasz Figa,
Heiko Stübner, linux-samsung-soc, linux-media
On Mon, Oct 24, 2022, at 14:29, Krzysztof Kozlowski wrote:
>> diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
>> index c403d7642f0a..c52c7ce1d8fa 100644
>> --- a/arch/arm/mach-s3c/Kconfig.s3c64xx
>> +++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
>> @@ -15,12 +15,9 @@ menuconfig ARCH_S3C64XX
>> select HAVE_TCM
>> select PLAT_SAMSUNG
>> select PM_GENERIC_DOMAINS if PM
>> - select S3C_DEV_NAND if ATAGS
>> select S3C_GPIO_TRACK if ATAGS
>> - select S3C2410_WATCHDOG
>
> This does not seem right. S3C2410_WATCHDOG is a driver used by all
> (including Exynos) platforms.
I don't remember why I removed this line, probably because I
removed S3C_DEV_WDT after there are no references to that
symbol left in board files. The watchdog driver is now DT-only
with cragg6410 being the last remaining board file.
Ideally we should not 'select' it from here but instead have
it enabled in the defconfig file, but I agree that would
be something to do in a separate patch, while the patch here
should not change the behavior. I'll revert this part.
>> @@ -121,10 +118,8 @@ config MACH_WLF_CRAGG_6410
>> select S3C_DEV_HSMMC1
>> select S3C_DEV_HSMMC2
>> select S3C_DEV_I2C1
>> - select S3C_DEV_RTC
>
> This as well.
I'm fairly sure this can be removed along with S3C_DEV_WDT,
S3C_DEV_I2C[2-7], S3C_DEV_NAND, and S3C_DEV_ONENAND
as I remove the symbols due to the lack of references
from cragg6410.
I folded in this fixup now:
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -16,8 +16,10 @@ menuconfig ARCH_S3C64XX
select PLAT_SAMSUNG
select PM_GENERIC_DOMAINS if PM
select S3C_GPIO_TRACK if ATAGS
+ select S3C2410_WATCHDOG
select SAMSUNG_ATAGS if ATAGS
select SAMSUNG_WAKEMASK if PM
+ select WATCHDOG
help
Samsung S3C64XX series based systems
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 05/21] ARM: s3c: simplify platform code
2022-10-24 13:32 ` Arnd Bergmann
@ 2022-10-24 14:13 ` Krzysztof Kozlowski
0 siblings, 0 replies; 82+ messages in thread
From: Krzysztof Kozlowski @ 2022-10-24 14:13 UTC (permalink / raw)
To: Arnd Bergmann, Arnd Bergmann, linux-arm-kernel, Mauro Carvalho Chehab
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Alim Akhtar,
Mark Brown, Juerg Haefliger, Linus Walleij, Tomasz Figa,
Heiko Stübner, linux-samsung-soc, linux-media
On 24/10/2022 09:32, Arnd Bergmann wrote:
> On Mon, Oct 24, 2022, at 14:29, Krzysztof Kozlowski wrote:
>
>>> diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
>>> index c403d7642f0a..c52c7ce1d8fa 100644
>>> --- a/arch/arm/mach-s3c/Kconfig.s3c64xx
>>> +++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
>>> @@ -15,12 +15,9 @@ menuconfig ARCH_S3C64XX
>>> select HAVE_TCM
>>> select PLAT_SAMSUNG
>>> select PM_GENERIC_DOMAINS if PM
>>> - select S3C_DEV_NAND if ATAGS
>>> select S3C_GPIO_TRACK if ATAGS
>>> - select S3C2410_WATCHDOG
>>
>> This does not seem right. S3C2410_WATCHDOG is a driver used by all
>> (including Exynos) platforms.
>
> I don't remember why I removed this line, probably because I
> removed S3C_DEV_WDT after there are no references to that
> symbol left in board files. The watchdog driver is now DT-only
> with cragg6410 being the last remaining board file.
>
> Ideally we should not 'select' it from here but instead have
> it enabled in the defconfig file, but I agree that would
> be something to do in a separate patch, while the patch here
> should not change the behavior. I'll revert this part.
>
>>> @@ -121,10 +118,8 @@ config MACH_WLF_CRAGG_6410
>>> select S3C_DEV_HSMMC1
>>> select S3C_DEV_HSMMC2
>>> select S3C_DEV_I2C1
>>> - select S3C_DEV_RTC
>>
>> This as well.
>
> I'm fairly sure this can be removed along with S3C_DEV_WDT,
> S3C_DEV_I2C[2-7], S3C_DEV_NAND, and S3C_DEV_ONENAND
> as I remove the symbols due to the lack of references
> from cragg6410.
Yes, you are right. This can be dropped.
>
> I folded in this fixup now:
>
> --- a/arch/arm/mach-s3c/Kconfig.s3c64xx
> +++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
> @@ -16,8 +16,10 @@ menuconfig ARCH_S3C64XX
> select PLAT_SAMSUNG
> select PM_GENERIC_DOMAINS if PM
> select S3C_GPIO_TRACK if ATAGS
> + select S3C2410_WATCHDOG
> select SAMSUNG_ATAGS if ATAGS
> select SAMSUNG_WAKEMASK if PM
> + select WATCHDOG
Looks ok.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 09/21] pata: remove samsung_cf driver
2022-10-23 22:41 ` Damien Le Moal
2022-10-23 22:43 ` Damien Le Moal
@ 2022-10-24 14:24 ` Arnd Bergmann
1 sibling, 0 replies; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-24 14:24 UTC (permalink / raw)
To: Damien Le Moal, Arnd Bergmann, linux-arm-kernel, Krzysztof Kozlowski
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Sergey Shtylyov,
Hannes Reinecke, linux-ide
On Mon, Oct 24, 2022, at 00:41, Damien Le Moal wrote:
> On 10/22/22 05:27, Arnd Bergmann wrote:
>> From: Arnd Bergmann <arnd@arndb.de>
>>
>> This device was only used by the smdk6410 board file that is now
>> gone, so the driver can be removed as well.
>
> This patch does not apply to the for-6.2 branch of libata tree. I can fix
> that easily, but I am concerned about the fact that this deletes the
> header file include/linux/platform_data/ata-samsung_cf.h, which has some
> function declarations for gpio used under arch/arm/mach-s3c. So If I apply
> this before you queue the other patches for this driver in for-next, we
> may endup with build failures. No ?
Right, that was a mistake on my end. I had tested the full 98-patch
series in sequence and assumed that the driver removal would be
fine to apply separately. I'll just merge this one through the
SoC tree then. I have double-checked the pbk3710 and palmld
drivers, and those should not have a problem like this one.
I still need to send the palmld driver, as the mach-pxa series
had some unrelated issues.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 01/21] ARM: s3c: remove all s3c24xx support
2022-10-22 20:56 ` Heiko Stübner
@ 2022-10-24 14:27 ` Arnd Bergmann
2022-10-24 15:45 ` Heiko Stübner
0 siblings, 1 reply; 82+ messages in thread
From: Arnd Bergmann @ 2022-10-24 14:27 UTC (permalink / raw)
To: Heiko Stübner, linux-arm-kernel, Krzysztof Kozlowski, Arnd Bergmann
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnaud Patard,
Christer Weinigel, Guillaume GOURAT, openmoko-kernel,
Jonathan Corbet, Alim Akhtar, Olof Johansson, soc, Rob Herring,
Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi, Michael Turquette,
Stephen Boyd, linux-doc, linux-samsung-soc, devicetree,
linux-stm32, linux-clk
On Sat, Oct 22, 2022, at 22:56, Heiko Stübner wrote:
> Am Freitag, 21. Oktober 2022, 22:27:34 CEST schrieb Arnd Bergmann:
>> From: Arnd Bergmann <arnd@arndb.de>
>>
>> The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark
>> as deprecated and schedule removal") and can be removed. This includes
>> all files that are exclusively for s3c24xx and not shared with s3c64xx,
>> as well as the glue logic in Kconfig and the maintainer file entries.
>>
>> Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
>> Cc: Ben Dooks <ben-linux@fluff.org>
>> Cc: Christer Weinigel <christer@weinigel.se>
>> Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv>
>> Cc: Heiko Stuebner <heiko@sntech.de>
>> Cc: Simtec Linux Team <linux@simtec.co.uk>
>> Cc: openmoko-kernel@lists.openmoko.org
>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>
> So many memories of me starting out in the kernel on s3c24xx.
> But it's no use trying to keep stuff around that nobody will likely
> ever use again. So with a sad face
>
> Acked-by: Heiko Stuebner <heiko@sntech.de>
>
>
> though you might want to also include
> drivers/dma/s3c24xx-dma.c
This was in a separate patch that removes the driver:
https://lore.kernel.org/linux-arm-kernel/20221021203329.4143397-14-arnd@kernel.org/
In the first patch, I only include references to removed
Kconfig symbols that would not make sense to split out into
separate patches.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 01/21] ARM: s3c: remove all s3c24xx support
2022-10-24 14:27 ` Arnd Bergmann
@ 2022-10-24 15:45 ` Heiko Stübner
0 siblings, 0 replies; 82+ messages in thread
From: Heiko Stübner @ 2022-10-24 15:45 UTC (permalink / raw)
To: linux-arm-kernel, Krzysztof Kozlowski, Arnd Bergmann, Arnd Bergmann
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnaud Patard,
Christer Weinigel, Guillaume GOURAT, openmoko-kernel,
Jonathan Corbet, Alim Akhtar, Olof Johansson, soc, Rob Herring,
Sylwester Nawrocki, Tomasz Figa, Chanwoo Choi, Michael Turquette,
Stephen Boyd, linux-doc, linux-samsung-soc, devicetree,
linux-stm32, linux-clk
Am Montag, 24. Oktober 2022, 16:27:31 CEST schrieb Arnd Bergmann:
> On Sat, Oct 22, 2022, at 22:56, Heiko Stübner wrote:
> > Am Freitag, 21. Oktober 2022, 22:27:34 CEST schrieb Arnd Bergmann:
> >> From: Arnd Bergmann <arnd@arndb.de>
> >>
> >> The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark
> >> as deprecated and schedule removal") and can be removed. This includes
> >> all files that are exclusively for s3c24xx and not shared with s3c64xx,
> >> as well as the glue logic in Kconfig and the maintainer file entries.
> >>
> >> Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
> >> Cc: Ben Dooks <ben-linux@fluff.org>
> >> Cc: Christer Weinigel <christer@weinigel.se>
> >> Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv>
> >> Cc: Heiko Stuebner <heiko@sntech.de>
> >> Cc: Simtec Linux Team <linux@simtec.co.uk>
> >> Cc: openmoko-kernel@lists.openmoko.org
> >> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> >
> > So many memories of me starting out in the kernel on s3c24xx.
> > But it's no use trying to keep stuff around that nobody will likely
> > ever use again. So with a sad face
> >
> > Acked-by: Heiko Stuebner <heiko@sntech.de>
> >
> >
> > though you might want to also include
> > drivers/dma/s3c24xx-dma.c
>
> This was in a separate patch that removes the driver:
>
> https://lore.kernel.org/linux-arm-kernel/20221021203329.4143397-14-arnd@kernel.org/
ah ok, I guess git-send-email didn't want to send me that patch.
So all is good in that part then :-)
Heiko
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 10/21] mmc: remove s3cmci driver
2022-10-21 20:27 ` [PATCH 10/21] mmc: remove s3cmci driver Arnd Bergmann
2022-10-24 12:35 ` Krzysztof Kozlowski
@ 2022-10-24 16:52 ` Ulf Hansson
1 sibling, 0 replies; 82+ messages in thread
From: Ulf Hansson @ 2022-10-24 16:52 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, linux-kernel, Ben Dooks,
Simtec Linux Team, Arnd Bergmann, Alim Akhtar, linux-mmc,
linux-samsung-soc
On Fri, 21 Oct 2022 at 22:45, Arnd Bergmann <arnd@kernel.org> wrote:
>
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform is gone, so this driver can be removed as well.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Kind regards
Uffe
> ---
> MAINTAINERS | 6 -
> drivers/mmc/host/Kconfig | 43 -
> drivers/mmc/host/Makefile | 1 -
> drivers/mmc/host/s3cmci.c | 1777 ----------------------
> drivers/mmc/host/s3cmci.h | 75 -
> include/linux/platform_data/mmc-s3cmci.h | 51 -
> 6 files changed, 1953 deletions(-)
> delete mode 100644 drivers/mmc/host/s3cmci.c
> delete mode 100644 drivers/mmc/host/s3cmci.h
> delete mode 100644 include/linux/platform_data/mmc-s3cmci.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2caf42b0328a..503ebd9800db 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -17920,12 +17920,6 @@ S: Supported
> W: http://www.ibm.com/developerworks/linux/linux390/
> F: drivers/s390/scsi/zfcp_*
>
> -S3C24XX SD/MMC Driver
> -M: Ben Dooks <ben-linux@fluff.org>
> -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> -S: Supported
> -F: drivers/mmc/host/s3cmci.*
> -
> SAA6588 RDS RECEIVER DRIVER
> M: Hans Verkuil <hverkuil@xs4all.nl>
> L: linux-media@vger.kernel.org
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 79d8ddf1f616..75e8c364243d 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -619,49 +619,6 @@ config MMC_SPI
>
> If unsure, or if your system has no SPI master driver, say N.
>
> -config MMC_S3C
> - tristate "Samsung S3C SD/MMC Card Interface support"
> - depends on ARCH_S3C24XX || COMPILE_TEST
> - depends on S3C24XX_DMAC || COMPILE_TEST
> - help
> - This selects a driver for the MCI interface found in
> - Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
> - If you have a board based on one of those and a MMC/SD
> - slot, say Y or M here.
> -
> - If unsure, say N.
> -
> -config MMC_S3C_HW_SDIO_IRQ
> - bool "Hardware support for SDIO IRQ"
> - depends on MMC_S3C
> - help
> - Enable the hardware support for SDIO interrupts instead of using
> - the generic polling code.
> -
> -choice
> - prompt "Samsung S3C SD/MMC transfer code"
> - depends on MMC_S3C
> -
> -config MMC_S3C_PIO
> - bool "Use PIO transfers only"
> - help
> - Use PIO to transfer data between memory and the hardware.
> -
> - PIO is slower than DMA as it requires CPU instructions to
> - move the data. This has been the traditional default for
> - the S3C MCI driver.
> -
> -config MMC_S3C_DMA
> - bool "Use DMA transfers only"
> - help
> - Use DMA to transfer data between memory and the hardware.
> -
> - Currently, the DMA support in this driver seems to not be
> - working properly and needs to be debugged before this
> - option is useful.
> -
> -endchoice
> -
> config MMC_SDRICOH_CS
> tristate "MMC/SD driver for Ricoh Bay1Controllers"
> depends on PCI && PCMCIA
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index 0baeb0b004f7..885e19e21e75 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -34,7 +34,6 @@ obj-$(CONFIG_MMC_MVSDIO) += mvsdio.o
> obj-$(CONFIG_MMC_DAVINCI) += davinci_mmc.o
> obj-$(CONFIG_MMC_SPI) += mmc_spi.o
> obj-$(CONFIG_MMC_SPI) += of_mmc_spi.o
> -obj-$(CONFIG_MMC_S3C) += s3cmci.o
> obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
> obj-$(CONFIG_MMC_TMIO_CORE) += tmio_mmc_core.o
> obj-$(CONFIG_MMC_SDHI) += renesas_sdhi_core.o
> diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
> deleted file mode 100644
> index 8d5929a32d34..000000000000
> diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h
> deleted file mode 100644
> index 8b65d7ad9f97..000000000000
> diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h
> deleted file mode 100644
> index bacb86db3112..000000000000
> --
> 2.29.2
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
2022-10-21 20:27 ` [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks Arnd Bergmann
` (6 preceding siblings ...)
2022-10-24 12:26 ` Krzysztof Kozlowski
@ 2022-10-24 16:53 ` Ulf Hansson
2022-10-27 23:10 ` Stephen Boyd
8 siblings, 0 replies; 82+ messages in thread
From: Ulf Hansson @ 2022-10-24 16:53 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, linux-kernel, Ben Dooks,
Simtec Linux Team, Arnd Bergmann, Alim Akhtar, Daniel Lezcano,
Thomas Gleixner, Jonathan Cameron, Lars-Peter Clausen,
Sylwester Nawrocki, Mauro Carvalho Chehab, Miquel Raynal,
Richard Weinberger, Vignesh Raghavendra, Tomasz Figa,
Linus Walleij, Alessandro Zummo, Alexandre Belloni,
Greg Kroah-Hartman, Jiri Slaby, Guenter Roeck, Chanwoo Choi,
Stephen Boyd, linux-samsung-soc, linux-i2c, linux-iio,
linux-media, linux-mmc, linux-mtd, linux-gpio, linux-rtc,
linux-serial, linux-usb, linux-watchdog, linux-clk
On Fri, 21 Oct 2022 at 22:37, Arnd Bergmann <arnd@kernel.org> wrote:
>
> From: Arnd Bergmann <arnd@arndb.de>
>
> A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
> similar symbols that are no longer available with the platform gone,
> though the drivers themselves are still used on newer platforms,
> so remove these hacks.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Kind regards
Uffe
> ---
> arch/arm/include/debug/s3c24xx.S | 10 -
> arch/arm/mach-s3c/Makefile | 2 -
> arch/arm/mach-s3c/devs.c | 1 -
> arch/arm/mach-s3c/dma.h | 7 -
> arch/arm/mach-s3c/gpio-samsung.h | 7 -
> arch/arm/mach-s3c/irqs.h | 7 -
> arch/arm/mach-s3c/map.h | 7 -
> arch/arm/mach-s3c/pm-core.h | 7 -
> arch/arm/mach-s3c/regs-clock.h | 7 -
> arch/arm/mach-s3c/regs-gpio.h | 7 -
> arch/arm/mach-s3c/regs-irq.h | 7 -
> drivers/clocksource/Kconfig | 2 +-
> drivers/i2c/busses/Kconfig | 3 +-
> drivers/i2c/busses/i2c-s3c2410.c | 72 -------
> drivers/iio/adc/Kconfig | 6 +-
> .../media/platform/samsung/s3c-camif/Kconfig | 8 +-
> drivers/mmc/host/Kconfig | 5 +-
> drivers/mtd/nand/raw/Kconfig | 2 +-
> drivers/mtd/nand/raw/s3c2410.c | 60 ------
> drivers/pinctrl/samsung/pinctrl-samsung.c | 10 -
> drivers/rtc/Kconfig | 8 +-
> drivers/tty/serial/Kconfig | 8 +-
> drivers/tty/serial/samsung_tty.c | 199 ------------------
> drivers/usb/host/Kconfig | 8 +-
> drivers/watchdog/Kconfig | 9 +-
> drivers/watchdog/s3c2410_wdt.c | 84 +-------
> include/linux/clk/samsung.h | 32 ---
> include/linux/soc/samsung/s3c-pm.h | 58 -----
> 28 files changed, 29 insertions(+), 614 deletions(-)
>
> diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S
> index af873b526677..7ab5e577cd42 100644
> --- a/arch/arm/include/debug/s3c24xx.S
> +++ b/arch/arm/include/debug/s3c24xx.S
> @@ -28,16 +28,6 @@
> and \rd, \rd, #S3C2410_UFSTAT_TXMASK
> .endm
>
> -/* Select the correct implementation depending on the configuration. The
> - * S3C2440 will get selected by default, as these are the most widely
> - * used variants of these
> -*/
> -
> -#if defined(CONFIG_DEBUG_S3C2410_UART)
> -#define fifo_full fifo_full_s3c2410
> -#define fifo_level fifo_level_s3c2410
> -#endif
> -
> /* include the reset of the code which will do the work */
>
> #include <debug/samsung.S>
> diff --git a/arch/arm/mach-s3c/Makefile b/arch/arm/mach-s3c/Makefile
> index e7f18039b149..a5135137e648 100644
> --- a/arch/arm/mach-s3c/Makefile
> +++ b/arch/arm/mach-s3c/Makefile
> @@ -2,9 +2,7 @@
> #
> # Copyright 2009 Simtec Electronics
>
> -ifdef CONFIG_ARCH_S3C64XX
> include $(src)/Makefile.s3c64xx
> -endif
>
> # Objects we always build independent of SoC choice
>
> diff --git a/arch/arm/mach-s3c/devs.c b/arch/arm/mach-s3c/devs.c
> index 9ac07c023adf..a31d1c3038e8 100644
> --- a/arch/arm/mach-s3c/devs.c
> +++ b/arch/arm/mach-s3c/devs.c
> @@ -29,7 +29,6 @@
> #include <linux/sizes.h>
> #include <linux/platform_data/s3c-hsudc.h>
> #include <linux/platform_data/s3c-hsotg.h>
> -#include <linux/platform_data/dma-s3c24xx.h>
>
> #include <linux/platform_data/media/s5p_hdmi.h>
>
> diff --git a/arch/arm/mach-s3c/dma.h b/arch/arm/mach-s3c/dma.h
> index 59a4578c5f00..48057cb90070 100644
> --- a/arch/arm/mach-s3c/dma.h
> +++ b/arch/arm/mach-s3c/dma.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "dma-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "dma-s3c64xx.h"
> -#endif
> diff --git a/arch/arm/mach-s3c/gpio-samsung.h b/arch/arm/mach-s3c/gpio-samsung.h
> index 02f6f4a96862..4233515eddaa 100644
> --- a/arch/arm/mach-s3c/gpio-samsung.h
> +++ b/arch/arm/mach-s3c/gpio-samsung.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "gpio-samsung-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "gpio-samsung-s3c64xx.h"
> -#endif
> diff --git a/arch/arm/mach-s3c/irqs.h b/arch/arm/mach-s3c/irqs.h
> index 0bff1c1c8eb0..3ff0e0963080 100644
> --- a/arch/arm/mach-s3c/irqs.h
> +++ b/arch/arm/mach-s3c/irqs.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "irqs-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "irqs-s3c64xx.h"
> -#endif
> diff --git a/arch/arm/mach-s3c/map.h b/arch/arm/mach-s3c/map.h
> index 7cfb517d4886..778d6f81cb2b 100644
> --- a/arch/arm/mach-s3c/map.h
> +++ b/arch/arm/mach-s3c/map.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "map-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "map-s3c64xx.h"
> -#endif
> diff --git a/arch/arm/mach-s3c/pm-core.h b/arch/arm/mach-s3c/pm-core.h
> index b0e1d277f599..3e0c2df79120 100644
> --- a/arch/arm/mach-s3c/pm-core.h
> +++ b/arch/arm/mach-s3c/pm-core.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "pm-core-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "pm-core-s3c64xx.h"
> -#endif
> diff --git a/arch/arm/mach-s3c/regs-clock.h b/arch/arm/mach-s3c/regs-clock.h
> index 7df31f203d28..fc7e3886b07c 100644
> --- a/arch/arm/mach-s3c/regs-clock.h
> +++ b/arch/arm/mach-s3c/regs-clock.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "regs-clock-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "regs-clock-s3c64xx.h"
> -#endif
> diff --git a/arch/arm/mach-s3c/regs-gpio.h b/arch/arm/mach-s3c/regs-gpio.h
> index 0d41cb76d440..4e08e8609663 100644
> --- a/arch/arm/mach-s3c/regs-gpio.h
> +++ b/arch/arm/mach-s3c/regs-gpio.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "regs-gpio-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "regs-gpio-s3c64xx.h"
> -#endif
> diff --git a/arch/arm/mach-s3c/regs-irq.h b/arch/arm/mach-s3c/regs-irq.h
> index 57f0dda8dbf5..4243daa54bd1 100644
> --- a/arch/arm/mach-s3c/regs-irq.h
> +++ b/arch/arm/mach-s3c/regs-irq.h
> @@ -1,9 +1,2 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> -
> -#ifdef CONFIG_ARCH_S3C24XX
> -#include "regs-irq-s3c24xx.h"
> -#endif
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> #include "regs-irq-s3c64xx.h"
> -#endif
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index 4469e7f555e9..fc10ecc3602d 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -441,7 +441,7 @@ config CLKSRC_EXYNOS_MCT
> config CLKSRC_SAMSUNG_PWM
> bool "PWM timer driver for Samsung S3C, S5P" if COMPILE_TEST
> depends on HAS_IOMEM
> - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST
> + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST
> help
> This is a new clocksource driver for the PWM timer found in
> Samsung S3C, S5P and Exynos SoCs, replacing an earlier driver
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index f427c8ea5c7b..84d21e0a7cdf 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -1009,8 +1009,7 @@ config I2C_RZV2M
>
> config I2C_S3C2410
> tristate "S3C/Exynos I2C Driver"
> - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || \
> - ARCH_S5PV210 || COMPILE_TEST
> + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST
> help
> Say Y here to include support for I2C controller in the
> Samsung SoCs (S3C, S5Pv210, Exynos).
> diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
> index 36dab9cd208c..45e9df81345a 100644
> --- a/drivers/i2c/busses/i2c-s3c2410.c
> +++ b/drivers/i2c/busses/i2c-s3c2410.c
> @@ -116,9 +116,6 @@ struct s3c24xx_i2c {
> struct s3c2410_platform_i2c *pdata;
> struct gpio_desc *gpios[2];
> struct pinctrl *pctrl;
> -#if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
> - struct notifier_block freq_transition;
> -#endif
> struct regmap *sysreg;
> unsigned int sys_i2c_cfg;
> };
> @@ -885,65 +882,6 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
> return 0;
> }
>
> -#if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
> -
> -#define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition)
> -
> -static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
> - unsigned long val, void *data)
> -{
> - struct s3c24xx_i2c *i2c = freq_to_i2c(nb);
> - unsigned int got;
> - int delta_f;
> - int ret;
> -
> - delta_f = clk_get_rate(i2c->clk) - i2c->clkrate;
> -
> - /* if we're post-change and the input clock has slowed down
> - * or at pre-change and the clock is about to speed up, then
> - * adjust our clock rate. <0 is slow, >0 speedup.
> - */
> -
> - if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) ||
> - (val == CPUFREQ_PRECHANGE && delta_f > 0)) {
> - i2c_lock_bus(&i2c->adap, I2C_LOCK_ROOT_ADAPTER);
> - ret = s3c24xx_i2c_clockrate(i2c, &got);
> - i2c_unlock_bus(&i2c->adap, I2C_LOCK_ROOT_ADAPTER);
> -
> - if (ret < 0)
> - dev_err(i2c->dev, "cannot find frequency (%d)\n", ret);
> - else
> - dev_info(i2c->dev, "setting freq %d\n", got);
> - }
> -
> - return 0;
> -}
> -
> -static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
> -{
> - i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition;
> -
> - return cpufreq_register_notifier(&i2c->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
> -{
> - cpufreq_unregister_notifier(&i2c->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -#else
> -static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
> -{
> - return 0;
> -}
> -
> -static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
> -{
> -}
> -#endif
> -
> #ifdef CONFIG_OF
> static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
> {
> @@ -1152,13 +1090,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
> }
> }
>
> - ret = s3c24xx_i2c_register_cpufreq(i2c);
> - if (ret < 0) {
> - dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
> - clk_unprepare(i2c->clk);
> - return ret;
> - }
> -
> /*
> * Note, previous versions of the driver used i2c_add_adapter()
> * to add the bus at any number. We now pass the bus number via
> @@ -1175,7 +1106,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
> ret = i2c_add_numbered_adapter(&i2c->adap);
> if (ret < 0) {
> pm_runtime_disable(&pdev->dev);
> - s3c24xx_i2c_deregister_cpufreq(i2c);
> clk_unprepare(i2c->clk);
> return ret;
> }
> @@ -1192,8 +1122,6 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
>
> pm_runtime_disable(&pdev->dev);
>
> - s3c24xx_i2c_deregister_cpufreq(i2c);
> -
> i2c_del_adapter(&i2c->adap);
>
> return 0;
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 791612ca6012..9de7f05d40e2 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -437,11 +437,11 @@ config EP93XX_ADC
>
> config EXYNOS_ADC
> tristate "Exynos ADC driver support"
> - depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST)
> + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST)
> depends on HAS_IOMEM
> help
> - Driver for the ADC block found in the Samsung S3C (S3C2410, S3C2416,
> - S3C2440, S3C2443, S3C6410), S5Pv210 and Exynos SoCs.
> + Driver for the ADC block found in the Samsung S3C6410, S5Pv210 and
> + Exynos SoCs.
> Choose Y here only if you build for such Samsung SoC.
>
> To compile this driver as a module, choose M here: the module will be
> diff --git a/drivers/media/platform/samsung/s3c-camif/Kconfig b/drivers/media/platform/samsung/s3c-camif/Kconfig
> index 8cb8d1ac3edc..f359f6382fff 100644
> --- a/drivers/media/platform/samsung/s3c-camif/Kconfig
> +++ b/drivers/media/platform/samsung/s3c-camif/Kconfig
> @@ -1,15 +1,15 @@
> # SPDX-License-Identifier: GPL-2.0-only
> config VIDEO_S3C_CAMIF
> - tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
> + tristate "Samsung 3C64XX SoC Camera Interface driver"
> depends on V4L_PLATFORM_DRIVERS
> depends on VIDEO_DEV && I2C && PM
> - depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST
> + depends on ARCH_S3C64XX || COMPILE_TEST
> select MEDIA_CONTROLLER
> select VIDEO_V4L2_SUBDEV_API
> select VIDEOBUF2_DMA_CONTIG
> help
> - This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
> - host interface (CAMIF).
> + This is a v4l2 driver for s3c64xx SoC series camera host interface
> + (CAMIF).
>
> To compile this driver as a module, choose M here: the module
> will be called s3c-camif.
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 84dd37ff2735..79d8ddf1f616 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -312,9 +312,8 @@ config MMC_SDHCI_S3C
> depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> help
> This selects the Secure Digital Host Controller Interface (SDHCI)
> - often referrered to as the HSMMC block in some of the Samsung S3C
> - (S3C2416, S3C2443, S3C6410), S5Pv210 and Exynos (Exynso4210,
> - Exynos4412) SoCs.
> + often referrered to as the HSMMC block in some of the Samsung
> + S3C6410, S5Pv210 and Exynos (Exynso4210, Exynos4412) SoCs.
>
> If you have a controller with this interface (thereforeyou build for
> such Samsung SoC), say Y or M here.
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index 280a55139387..a347833b8f29 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -79,7 +79,7 @@ config MTD_NAND_NDFC
>
> config MTD_NAND_S3C2410
> tristate "Samsung S3C NAND controller"
> - depends on ARCH_S3C24XX || ARCH_S3C64XX
> + depends on ARCH_S3C64XX
> help
> This enables the NAND flash controller on the S3C24xx and S3C64xx
> SoCs
> diff --git a/drivers/mtd/nand/raw/s3c2410.c b/drivers/mtd/nand/raw/s3c2410.c
> index f0a4535c812a..80d96f94d6cb 100644
> --- a/drivers/mtd/nand/raw/s3c2410.c
> +++ b/drivers/mtd/nand/raw/s3c2410.c
> @@ -166,10 +166,6 @@ struct s3c2410_nand_info {
> enum s3c_nand_clk_state clk_state;
>
> enum s3c_cpu_type cpu_type;
> -
> -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
> - struct notifier_block freq_transition;
> -#endif
> };
>
> struct s3c24XX_nand_devtype_data {
> @@ -711,54 +707,6 @@ static void s3c2440_nand_write_buf(struct nand_chip *this, const u_char *buf,
> }
> }
>
> -/* cpufreq driver support */
> -
> -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
> -
> -static int s3c2410_nand_cpufreq_transition(struct notifier_block *nb,
> - unsigned long val, void *data)
> -{
> - struct s3c2410_nand_info *info;
> - unsigned long newclk;
> -
> - info = container_of(nb, struct s3c2410_nand_info, freq_transition);
> - newclk = clk_get_rate(info->clk);
> -
> - if ((val == CPUFREQ_POSTCHANGE && newclk < info->clk_rate) ||
> - (val == CPUFREQ_PRECHANGE && newclk > info->clk_rate)) {
> - s3c2410_nand_setrate(info);
> - }
> -
> - return 0;
> -}
> -
> -static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
> -{
> - info->freq_transition.notifier_call = s3c2410_nand_cpufreq_transition;
> -
> - return cpufreq_register_notifier(&info->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -static inline void
> -s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
> -{
> - cpufreq_unregister_notifier(&info->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -#else
> -static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
> -{
> - return 0;
> -}
> -
> -static inline void
> -s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
> -{
> -}
> -#endif
> -
> /* device management functions */
>
> static int s3c24xx_nand_remove(struct platform_device *pdev)
> @@ -768,8 +716,6 @@ static int s3c24xx_nand_remove(struct platform_device *pdev)
> if (info == NULL)
> return 0;
>
> - s3c2410_nand_cpufreq_deregister(info);
> -
> /* Release all our mtds and their partitions, then go through
> * freeing the resources used
> */
> @@ -1184,12 +1130,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
> if (err != 0)
> goto exit_error;
>
> - err = s3c2410_nand_cpufreq_register(info);
> - if (err < 0) {
> - dev_err(&pdev->dev, "failed to init cpufreq support\n");
> - goto exit_error;
> - }
> -
> if (allow_clk_suspend(info)) {
> dev_info(&pdev->dev, "clock idle support enabled\n");
> s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
> diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
> index bd13b5ef246d..1a478854293f 100644
> --- a/drivers/pinctrl/samsung/pinctrl-samsung.c
> +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
> @@ -1322,16 +1322,6 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
> #ifdef CONFIG_PINCTRL_S3C64XX
> { .compatible = "samsung,s3c64xx-pinctrl",
> .data = &s3c64xx_of_data },
> -#endif
> -#ifdef CONFIG_PINCTRL_S3C24XX
> - { .compatible = "samsung,s3c2412-pinctrl",
> - .data = &s3c2412_of_data },
> - { .compatible = "samsung,s3c2416-pinctrl",
> - .data = &s3c2416_of_data },
> - { .compatible = "samsung,s3c2440-pinctrl",
> - .data = &s3c2440_of_data },
> - { .compatible = "samsung,s3c2450-pinctrl",
> - .data = &s3c2450_of_data },
> #endif
> {},
> };
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index 312dccfa3f18..d13ca620ea5d 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -1406,18 +1406,14 @@ config RTC_DRV_OMAP
>
> config RTC_DRV_S3C
> tristate "Samsung S3C series SoC RTC"
> - depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S3C24XX || ARCH_S5PV210 || \
> + depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || \
> COMPILE_TEST
> help
> RTC (Realtime Clock) driver for the clock inbuilt into the
> - Samsung S3C24XX series of SoCs. This can provide periodic
> + Samsung S3C64XX series of SoCs. This can provide periodic
> interrupt rates from 1Hz to 64Hz for user programs, and
> wakeup from Alarm.
>
> - The driver currently supports the common features on all the
> - S3C24XX range, such as the S3C2410, S3C2412, S3C2413, S3C2440
> - and S3C2442.
> -
> This driver can also be build as a module. If so, the module
> will be called rtc-s3c.
>
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 434f83168546..3ba8a39655a3 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -242,23 +242,23 @@ config SERIAL_SAMSUNG
> select SERIAL_CORE
> help
> Support for the on-chip UARTs on the Samsung
> - S3C24xx/S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing
> + S3C64xx/S5Pv210/Exynos and Apple M1 SoCs, providing
> /dev/ttySAC0, 1 and 2 (note, some machines may not provide all of
> these ports, depending on how the serial port pins are configured.
> +
> Choose Y/M here only if you build for such SoC.
>
> config SERIAL_SAMSUNG_UARTS_4
> bool
> depends on SERIAL_SAMSUNG
> - default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
> + default y
> help
> Internal node for the common case of 4 Samsung compatible UARTs
>
> config SERIAL_SAMSUNG_UARTS
> int
> depends on SERIAL_SAMSUNG
> - default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
> - default 3
> + default 4
> help
> Select the number of available UART ports for the Samsung S3C
> serial driver
> diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
> index 77d1363029f5..5adf3963b2f6 100644
> --- a/drivers/tty/serial/samsung_tty.c
> +++ b/drivers/tty/serial/samsung_tty.c
> @@ -152,10 +152,6 @@ struct s3c24xx_uart_port {
> const struct s3c2410_uartcfg *cfg;
>
> struct s3c24xx_uart_dma *dma;
> -
> -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
> - struct notifier_block freq_transition;
> -#endif
> };
>
> static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport);
> @@ -1859,93 +1855,6 @@ static void s3c24xx_serial_resetport(struct uart_port *port,
> udelay(1);
> }
>
> -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
> -
> -static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
> - unsigned long val, void *data)
> -{
> - struct s3c24xx_uart_port *port;
> - struct uart_port *uport;
> -
> - port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
> - uport = &port->port;
> -
> - /* check to see if port is enabled */
> -
> - if (port->pm_level != 0)
> - return 0;
> -
> - /* try and work out if the baudrate is changing, we can detect
> - * a change in rate, but we do not have support for detecting
> - * a disturbance in the clock-rate over the change.
> - */
> -
> - if (IS_ERR(port->baudclk))
> - goto exit;
> -
> - if (port->baudclk_rate == clk_get_rate(port->baudclk))
> - goto exit;
> -
> - if (val == CPUFREQ_PRECHANGE) {
> - /* we should really shut the port down whilst the
> - * frequency change is in progress.
> - */
> -
> - } else if (val == CPUFREQ_POSTCHANGE) {
> - struct ktermios *termios;
> - struct tty_struct *tty;
> -
> - if (uport->state == NULL)
> - goto exit;
> -
> - tty = uport->state->port.tty;
> -
> - if (tty == NULL)
> - goto exit;
> -
> - termios = &tty->termios;
> -
> - if (termios == NULL) {
> - dev_warn(uport->dev, "%s: no termios?\n", __func__);
> - goto exit;
> - }
> -
> - s3c24xx_serial_set_termios(uport, termios, NULL);
> - }
> -
> -exit:
> - return 0;
> -}
> -
> -static inline int
> -s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
> -{
> - port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
> -
> - return cpufreq_register_notifier(&port->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -static inline void
> -s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
> -{
> - cpufreq_unregister_notifier(&port->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -#else
> -static inline int
> -s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
> -{
> - return 0;
> -}
> -
> -static inline void
> -s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
> -{
> -}
> -#endif
> -
> static int s3c24xx_serial_enable_baudclk(struct s3c24xx_uart_port *ourport)
> {
> struct device *dev = ourport->port.dev;
> @@ -2237,10 +2146,6 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
> if (!IS_ERR(ourport->baudclk))
> clk_disable_unprepare(ourport->baudclk);
>
> - ret = s3c24xx_serial_cpufreq_register(ourport);
> - if (ret < 0)
> - dev_err(&pdev->dev, "failed to add cpufreq notifier\n");
> -
> probe_index++;
>
> return 0;
> @@ -2251,7 +2156,6 @@ static int s3c24xx_serial_remove(struct platform_device *dev)
> struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
>
> if (port) {
> - s3c24xx_serial_cpufreq_deregister(to_ourport(port));
> uart_remove_one_port(&s3c24xx_uart_drv, port);
> }
>
> @@ -2589,94 +2493,6 @@ static struct console s3c24xx_serial_console = {
> };
> #endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
>
> -#ifdef CONFIG_CPU_S3C2410
> -static const struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
> - .info = {
> - .name = "Samsung S3C2410 UART",
> - .type = TYPE_S3C24XX,
> - .port_type = PORT_S3C2410,
> - .fifosize = 16,
> - .rx_fifomask = S3C2410_UFSTAT_RXMASK,
> - .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
> - .rx_fifofull = S3C2410_UFSTAT_RXFULL,
> - .tx_fifofull = S3C2410_UFSTAT_TXFULL,
> - .tx_fifomask = S3C2410_UFSTAT_TXMASK,
> - .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
> - .def_clk_sel = S3C2410_UCON_CLKSEL0,
> - .num_clks = 2,
> - .clksel_mask = S3C2410_UCON_CLKMASK,
> - .clksel_shift = S3C2410_UCON_CLKSHIFT,
> - },
> - .def_cfg = {
> - .ucon = S3C2410_UCON_DEFAULT,
> - .ufcon = S3C2410_UFCON_DEFAULT,
> - },
> -};
> -#define S3C2410_SERIAL_DRV_DATA (&s3c2410_serial_drv_data)
> -#else
> -#define S3C2410_SERIAL_DRV_DATA NULL
> -#endif
> -
> -#ifdef CONFIG_CPU_S3C2412
> -static const struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
> - .info = {
> - .name = "Samsung S3C2412 UART",
> - .type = TYPE_S3C24XX,
> - .port_type = PORT_S3C2412,
> - .fifosize = 64,
> - .has_divslot = 1,
> - .rx_fifomask = S3C2440_UFSTAT_RXMASK,
> - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
> - .rx_fifofull = S3C2440_UFSTAT_RXFULL,
> - .tx_fifofull = S3C2440_UFSTAT_TXFULL,
> - .tx_fifomask = S3C2440_UFSTAT_TXMASK,
> - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
> - .def_clk_sel = S3C2410_UCON_CLKSEL2,
> - .num_clks = 4,
> - .clksel_mask = S3C2412_UCON_CLKMASK,
> - .clksel_shift = S3C2412_UCON_CLKSHIFT,
> - },
> - .def_cfg = {
> - .ucon = S3C2410_UCON_DEFAULT,
> - .ufcon = S3C2410_UFCON_DEFAULT,
> - },
> -};
> -#define S3C2412_SERIAL_DRV_DATA (&s3c2412_serial_drv_data)
> -#else
> -#define S3C2412_SERIAL_DRV_DATA NULL
> -#endif
> -
> -#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \
> - defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442)
> -static const struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
> - .info = {
> - .name = "Samsung S3C2440 UART",
> - .type = TYPE_S3C24XX,
> - .port_type = PORT_S3C2440,
> - .fifosize = 64,
> - .has_divslot = 1,
> - .rx_fifomask = S3C2440_UFSTAT_RXMASK,
> - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
> - .rx_fifofull = S3C2440_UFSTAT_RXFULL,
> - .tx_fifofull = S3C2440_UFSTAT_TXFULL,
> - .tx_fifomask = S3C2440_UFSTAT_TXMASK,
> - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
> - .def_clk_sel = S3C2410_UCON_CLKSEL2,
> - .num_clks = 4,
> - .clksel_mask = S3C2412_UCON_CLKMASK,
> - .clksel_shift = S3C2412_UCON_CLKSHIFT,
> - .ucon_mask = S3C2440_UCON0_DIVMASK,
> - },
> - .def_cfg = {
> - .ucon = S3C2410_UCON_DEFAULT,
> - .ufcon = S3C2410_UFCON_DEFAULT,
> - },
> -};
> -#define S3C2440_SERIAL_DRV_DATA (&s3c2440_serial_drv_data)
> -#else
> -#define S3C2440_SERIAL_DRV_DATA NULL
> -#endif
> -
> #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
> static const struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
> .info = {
> @@ -2845,15 +2661,6 @@ static const struct s3c24xx_serial_drv_data artpec8_serial_drv_data = {
>
> static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
> {
> - .name = "s3c2410-uart",
> - .driver_data = (kernel_ulong_t)S3C2410_SERIAL_DRV_DATA,
> - }, {
> - .name = "s3c2412-uart",
> - .driver_data = (kernel_ulong_t)S3C2412_SERIAL_DRV_DATA,
> - }, {
> - .name = "s3c2440-uart",
> - .driver_data = (kernel_ulong_t)S3C2440_SERIAL_DRV_DATA,
> - }, {
> .name = "s3c6400-uart",
> .driver_data = (kernel_ulong_t)S3C6400_SERIAL_DRV_DATA,
> }, {
> @@ -2881,12 +2688,6 @@ MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
>
> #ifdef CONFIG_OF
> static const struct of_device_id s3c24xx_uart_dt_match[] = {
> - { .compatible = "samsung,s3c2410-uart",
> - .data = S3C2410_SERIAL_DRV_DATA },
> - { .compatible = "samsung,s3c2412-uart",
> - .data = S3C2412_SERIAL_DRV_DATA },
> - { .compatible = "samsung,s3c2440-uart",
> - .data = S3C2440_SERIAL_DRV_DATA },
> { .compatible = "samsung,s3c6400-uart",
> .data = S3C6400_SERIAL_DRV_DATA },
> { .compatible = "samsung,s5pv210-uart",
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index fb7b603dddf8..8ba4fe9364b1 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -443,12 +443,12 @@ config USB_OHCI_HCD_STI
> STMicroelectronics consumer electronics SoC's.
>
> config USB_OHCI_HCD_S3C2410
> - tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
> - depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST)
> - default y if (ARCH_S3C24XX || ARCH_S3C64XX)
> + tristate "OHCI support for Samsung S3C64xx SoC series"
> + depends on USB_OHCI_HCD && (ARCH_S3C64XX || COMPILE_TEST)
> + default ARCH_S3C64XX
> help
> Enables support for the on-chip OHCI controller on
> - S3C24xx/S3C64xx chips.
> + S3C64xx chips.
>
> config USB_OHCI_HCD_LPC32XX
> tristate "Support for LPC on-chip OHCI USB controller"
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index b64bc49c7f30..eee7df45347a 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -491,14 +491,13 @@ config IXP4XX_WATCHDOG
> Say N if you are unsure.
>
> config S3C2410_WATCHDOG
> - tristate "S3C2410 Watchdog"
> - depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || \
> - COMPILE_TEST
> + tristate "S3C6410/S5Pv210/Exynos Watchdog"
> + depends on ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> select WATCHDOG_CORE
> select MFD_SYSCON if ARCH_EXYNOS
> help
> - Watchdog timer block in the Samsung S3C24xx, S3C64xx, S5Pv210 and
> - Exynos SoCs. This will reboot the system when the timer expires with
> + Watchdog timer block in the Samsung S3C64xx, S5Pv210 and Exynos
> + SoCs. This will reboot the system when the timer expires with
> the watchdog enabled.
>
> The driver is limited by the speed of the system's PCLK
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index d3fc8ed886ff..200ba236a72e 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -562,73 +562,6 @@ static irqreturn_t s3c2410wdt_irq(int irqno, void *param)
> return IRQ_HANDLED;
> }
>
> -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
> -
> -static int s3c2410wdt_cpufreq_transition(struct notifier_block *nb,
> - unsigned long val, void *data)
> -{
> - int ret;
> - struct s3c2410_wdt *wdt = freq_to_wdt(nb);
> -
> - if (!s3c2410wdt_is_running(wdt))
> - goto done;
> -
> - if (val == CPUFREQ_PRECHANGE) {
> - /* To ensure that over the change we don't cause the
> - * watchdog to trigger, we perform an keep-alive if
> - * the watchdog is running.
> - */
> -
> - s3c2410wdt_keepalive(&wdt->wdt_device);
> - } else if (val == CPUFREQ_POSTCHANGE) {
> - s3c2410wdt_stop(&wdt->wdt_device);
> -
> - ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
> - wdt->wdt_device.timeout);
> -
> - if (ret >= 0)
> - s3c2410wdt_start(&wdt->wdt_device);
> - else
> - goto err;
> - }
> -
> -done:
> - return 0;
> -
> - err:
> - dev_err(wdt->dev, "cannot set new value for timeout %d\n",
> - wdt->wdt_device.timeout);
> - return ret;
> -}
> -
> -static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
> -{
> - wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;
> -
> - return cpufreq_register_notifier(&wdt->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
> -{
> - wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;
> -
> - cpufreq_unregister_notifier(&wdt->freq_transition,
> - CPUFREQ_TRANSITION_NOTIFIER);
> -}
> -
> -#else
> -
> -static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
> -{
> - return 0;
> -}
> -
> -static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
> -{
> -}
> -#endif
> -
> static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt)
> {
> unsigned int rst_stat;
> @@ -761,12 +694,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> wdt->wdt_device.min_timeout = 1;
> wdt->wdt_device.max_timeout = s3c2410wdt_max_timeout(wdt);
>
> - ret = s3c2410wdt_cpufreq_register(wdt);
> - if (ret < 0) {
> - dev_err(dev, "failed to register cpufreq\n");
> - goto err_src_clk;
> - }
> -
> watchdog_set_drvdata(&wdt->wdt_device, wdt);
>
> /* see if we can actually set the requested timer margin, and if
> @@ -783,7 +710,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> S3C2410_WATCHDOG_DEFAULT_TIME);
> } else {
> dev_err(dev, "failed to use default timeout\n");
> - goto err_cpufreq;
> + goto err_src_clk;
> }
> }
>
> @@ -791,7 +718,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> pdev->name, pdev);
> if (ret != 0) {
> dev_err(dev, "failed to install irq (%d)\n", ret);
> - goto err_cpufreq;
> + goto err_src_clk;
> }
>
> watchdog_set_nowayout(&wdt->wdt_device, nowayout);
> @@ -817,7 +744,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
>
> ret = watchdog_register_device(&wdt->wdt_device);
> if (ret)
> - goto err_cpufreq;
> + goto err_src_clk;
>
> ret = s3c2410wdt_enable(wdt, true);
> if (ret < 0)
> @@ -839,9 +766,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> err_unregister:
> watchdog_unregister_device(&wdt->wdt_device);
>
> - err_cpufreq:
> - s3c2410wdt_cpufreq_deregister(wdt);
> -
> err_src_clk:
> clk_disable_unprepare(wdt->src_clk);
>
> @@ -862,8 +786,6 @@ static int s3c2410wdt_remove(struct platform_device *dev)
>
> watchdog_unregister_device(&wdt->wdt_device);
>
> - s3c2410wdt_cpufreq_deregister(wdt);
> -
> clk_disable_unprepare(wdt->src_clk);
> clk_disable_unprepare(wdt->bus_clk);
>
> diff --git a/include/linux/clk/samsung.h b/include/linux/clk/samsung.h
> index 38b774001712..0cf7aac83439 100644
> --- a/include/linux/clk/samsung.h
> +++ b/include/linux/clk/samsung.h
> @@ -21,36 +21,4 @@ static inline void s3c64xx_clk_init(struct device_node *np,
> bool s3c6400, void __iomem *base) { }
> #endif /* CONFIG_S3C64XX_COMMON_CLK */
>
> -#ifdef CONFIG_S3C2410_COMMON_CLK
> -void s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
> - int current_soc,
> - void __iomem *reg_base);
> -#else
> -static inline void s3c2410_common_clk_init(struct device_node *np,
> - unsigned long xti_f,
> - int current_soc,
> - void __iomem *reg_base) { }
> -#endif /* CONFIG_S3C2410_COMMON_CLK */
> -
> -#ifdef CONFIG_S3C2412_COMMON_CLK
> -void s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
> - unsigned long ext_f, void __iomem *reg_base);
> -#else
> -static inline void s3c2412_common_clk_init(struct device_node *np,
> - unsigned long xti_f,
> - unsigned long ext_f,
> - void __iomem *reg_base) { }
> -#endif /* CONFIG_S3C2412_COMMON_CLK */
> -
> -#ifdef CONFIG_S3C2443_COMMON_CLK
> -void s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
> - int current_soc,
> - void __iomem *reg_base);
> -#else
> -static inline void s3c2443_common_clk_init(struct device_node *np,
> - unsigned long xti_f,
> - int current_soc,
> - void __iomem *reg_base) { }
> -#endif /* CONFIG_S3C2443_COMMON_CLK */
> -
> #endif /* __LINUX_CLK_SAMSUNG_H_ */
> diff --git a/include/linux/soc/samsung/s3c-pm.h b/include/linux/soc/samsung/s3c-pm.h
> index f9164559c99f..5b23d85d20ab 100644
> --- a/include/linux/soc/samsung/s3c-pm.h
> +++ b/include/linux/soc/samsung/s3c-pm.h
> @@ -14,58 +14,10 @@
>
> /* PM debug functions */
>
> -/**
> - * struct pm_uart_save - save block for core UART
> - * @ulcon: Save value for S3C2410_ULCON
> - * @ucon: Save value for S3C2410_UCON
> - * @ufcon: Save value for S3C2410_UFCON
> - * @umcon: Save value for S3C2410_UMCON
> - * @ubrdiv: Save value for S3C2410_UBRDIV
> - *
> - * Save block for UART registers to be held over sleep and restored if they
> - * are needed (say by debug).
> -*/
> -struct pm_uart_save {
> - u32 ulcon;
> - u32 ucon;
> - u32 ufcon;
> - u32 umcon;
> - u32 ubrdiv;
> - u32 udivslot;
> -};
> -
> -#ifdef CONFIG_SAMSUNG_PM_DEBUG
> -/**
> - * s3c_pm_dbg() - low level debug function for use in suspend/resume.
> - * @msg: The message to print.
> - *
> - * This function is used mainly to debug the resume process before the system
> - * can rely on printk/console output. It uses the low-level debugging output
> - * routine printascii() to do its work.
> - */
> -extern void s3c_pm_dbg(const char *msg, ...);
> -
> -#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
> -
> -extern void s3c_pm_save_uarts(bool is_s3c24xx);
> -extern void s3c_pm_restore_uarts(bool is_s3c24xx);
> -
> -#ifdef CONFIG_ARCH_S3C64XX
> -extern void s3c_pm_arch_update_uart(void __iomem *regs,
> - struct pm_uart_save *save);
> -#else
> -static inline void
> -s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
> -{
> -}
> -#endif
> -
> -#else
> #define S3C_PMDBG(fmt...) pr_debug(fmt)
>
> static inline void s3c_pm_save_uarts(bool is_s3c24xx) { }
> static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { }
> -#endif
>
> /* suspend memory checking */
>
> @@ -81,14 +33,4 @@ extern void s3c_pm_check_store(void);
> #define s3c_pm_check_store() do { } while (0)
> #endif
>
> -/* system device subsystems */
> -
> -extern struct bus_type s3c2410_subsys;
> -extern struct bus_type s3c2410a_subsys;
> -extern struct bus_type s3c2412_subsys;
> -extern struct bus_type s3c2416_subsys;
> -extern struct bus_type s3c2440_subsys;
> -extern struct bus_type s3c2442_subsys;
> -extern struct bus_type s3c2443_subsys;
> -
> #endif
> --
> 2.29.2
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 15/21] cpufreq: remove s3c24xx drivers
2022-10-21 20:27 ` [PATCH 15/21] cpufreq: remove s3c24xx drivers Arnd Bergmann
2022-10-24 12:40 ` Krzysztof Kozlowski
@ 2022-10-25 5:19 ` Viresh Kumar
1 sibling, 0 replies; 82+ messages in thread
From: Viresh Kumar @ 2022-10-25 5:19 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, Rafael J. Wysocki,
linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-pm, linux-samsung-soc
On 21-10-22, 22:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> All s3c24xx platforms were removed, so these five drivers are all
> obsolete now.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> drivers/cpufreq/Kconfig.arm | 78 ---
> drivers/cpufreq/Makefile | 6 -
> drivers/cpufreq/s3c2410-cpufreq.c | 155 -----
> drivers/cpufreq/s3c2412-cpufreq.c | 240 -------
> drivers/cpufreq/s3c2416-cpufreq.c | 492 --------------
> drivers/cpufreq/s3c2440-cpufreq.c | 321 ---------
> drivers/cpufreq/s3c24xx-cpufreq-debugfs.c | 163 -----
> drivers/cpufreq/s3c24xx-cpufreq.c | 648 -------------------
> include/linux/soc/samsung/s3c-cpufreq-core.h | 299 ---------
> 9 files changed, 2402 deletions(-)
> delete mode 100644 drivers/cpufreq/s3c2410-cpufreq.c
> delete mode 100644 drivers/cpufreq/s3c2412-cpufreq.c
> delete mode 100644 drivers/cpufreq/s3c2416-cpufreq.c
> delete mode 100644 drivers/cpufreq/s3c2440-cpufreq.c
> delete mode 100644 drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
> delete mode 100644 drivers/cpufreq/s3c24xx-cpufreq.c
> delete mode 100644 include/linux/soc/samsung/s3c-cpufreq-core.h
>
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 8f7a1065f344..e3e0367305ec 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -180,84 +180,6 @@ config ARM_RASPBERRYPI_CPUFREQ
>
> If in doubt, say N.
>
> -config ARM_S3C_CPUFREQ
> - bool
> - help
> - Internal configuration node for common cpufreq on Samsung SoC
> -
> -config ARM_S3C24XX_CPUFREQ
> - bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
> - depends on ARCH_S3C24XX
> - select ARM_S3C_CPUFREQ
> - help
> - This enables the CPUfreq driver for the Samsung S3C24XX family
> - of CPUs.
> -
> - For details, take a look at <file:Documentation/cpu-freq>.
> -
> - If in doubt, say N.
> -
> -config ARM_S3C24XX_CPUFREQ_DEBUG
> - bool "Debug CPUfreq Samsung driver core"
> - depends on ARM_S3C24XX_CPUFREQ
> - help
> - Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
> -
> -config ARM_S3C24XX_CPUFREQ_IODEBUG
> - bool "Debug CPUfreq Samsung driver IO timing"
> - depends on ARM_S3C24XX_CPUFREQ
> - help
> - Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
> -
> -config ARM_S3C24XX_CPUFREQ_DEBUGFS
> - bool "Export debugfs for CPUFreq"
> - depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS
> - help
> - Export status information via debugfs.
> -
> -config ARM_S3C2410_CPUFREQ
> - bool
> - depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
> - help
> - CPU Frequency scaling support for S3C2410
> -
> -config ARM_S3C2412_CPUFREQ
> - bool
> - depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412
> - default y
> - select S3C2412_IOTIMING
> - help
> - CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
> -
> -config ARM_S3C2416_CPUFREQ
> - bool "S3C2416 CPU Frequency scaling support"
> - depends on CPU_S3C2416
> - help
> - This adds the CPUFreq driver for the Samsung S3C2416 and
> - S3C2450 SoC. The S3C2416 supports changing the rate of the
> - armdiv clock source and also entering a so called dynamic
> - voltage scaling mode in which it is possible to reduce the
> - core voltage of the CPU.
> -
> - If in doubt, say N.
> -
> -config ARM_S3C2416_CPUFREQ_VCORESCALE
> - bool "Allow voltage scaling for S3C2416 arm core"
> - depends on ARM_S3C2416_CPUFREQ && REGULATOR
> - help
> - Enable CPU voltage scaling when entering the dvs mode.
> - It uses information gathered through existing hardware and
> - tests but not documented in any datasheet.
> -
> - If in doubt, say N.
> -
> -config ARM_S3C2440_CPUFREQ
> - bool "S3C2440/S3C2442 CPU Frequency scaling support"
> - depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
> - default y
> - help
> - CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
> -
> config ARM_S3C64XX_CPUFREQ
> bool "Samsung S3C64XX"
> depends on CPU_S3C6410
> diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
> index 8de99b213146..692c16e4ee55 100644
> --- a/drivers/cpufreq/Makefile
> +++ b/drivers/cpufreq/Makefile
> @@ -70,13 +70,7 @@ obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
> obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o
> obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o
> obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o
> -obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
> -obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
> -obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
> -obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
> obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
> -obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
> -obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
> obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
> obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
> obj-$(CONFIG_ARM_SCMI_CPUFREQ) += scmi-cpufreq.o
> diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c
> deleted file mode 100644
> index 5dcfbf0bfb74..000000000000
> diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c
> deleted file mode 100644
> index 5945945ead7c..000000000000
> diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c
> deleted file mode 100644
> index 5c221bc90210..000000000000
> diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c
> deleted file mode 100644
> index 2011fb9c03a4..000000000000
> diff --git a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
> deleted file mode 100644
> index 93971dfe7c75..000000000000
> diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
> deleted file mode 100644
> index 7380c32b238e..000000000000
> diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h
> deleted file mode 100644
> index 3b278afb769b..000000000000
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
--
viresh
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 01/21] ARM: s3c: remove all s3c24xx support
2022-10-21 20:27 ` [PATCH 01/21] ARM: s3c: remove all s3c24xx support Arnd Bergmann
2022-10-22 20:56 ` Heiko Stübner
2022-10-24 12:25 ` Krzysztof Kozlowski
@ 2022-10-27 23:10 ` Stephen Boyd
2 siblings, 0 replies; 82+ messages in thread
From: Stephen Boyd @ 2022-10-27 23:10 UTC (permalink / raw)
To: Arnd Bergmann, Krzysztof Kozlowski, linux-arm-kernel
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Arnaud Patard, Christer Weinigel, Guillaume GOURAT,
Heiko Stuebner, openmoko-kernel, Jonathan Corbet, Alim Akhtar,
Olof Johansson, soc, Rob Herring, Sylwester Nawrocki,
Tomasz Figa, Chanwoo Choi, Michael Turquette, linux-doc,
linux-samsung-soc, devicetree, linux-stm32, linux-clk
Quoting Arnd Bergmann (2022-10-21 13:27:34)
> From: Arnd Bergmann <arnd@arndb.de>
>
> The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark
> as deprecated and schedule removal") and can be removed. This includes
> all files that are exclusively for s3c24xx and not shared with s3c64xx,
> as well as the glue logic in Kconfig and the maintainer file entries.
>
> Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
> Cc: Ben Dooks <ben-linux@fluff.org>
> Cc: Christer Weinigel <christer@weinigel.se>
> Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv>
> Cc: Heiko Stuebner <heiko@sntech.de>
> Cc: Simtec Linux Team <linux@simtec.co.uk>
> Cc: openmoko-kernel@lists.openmoko.org
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
2022-10-21 20:27 ` [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks Arnd Bergmann
` (7 preceding siblings ...)
2022-10-24 16:53 ` Ulf Hansson
@ 2022-10-27 23:10 ` Stephen Boyd
8 siblings, 0 replies; 82+ messages in thread
From: Stephen Boyd @ 2022-10-27 23:10 UTC (permalink / raw)
To: Arnd Bergmann, Krzysztof Kozlowski, linux-arm-kernel
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, Daniel Lezcano, Thomas Gleixner, Jonathan Cameron,
Lars-Peter Clausen, Sylwester Nawrocki, Mauro Carvalho Chehab,
Ulf Hansson, Miquel Raynal, Richard Weinberger,
Vignesh Raghavendra, Tomasz Figa, Linus Walleij,
Alessandro Zummo, Alexandre Belloni, Greg Kroah-Hartman,
Jiri Slaby, Guenter Roeck, Chanwoo Choi, linux-samsung-soc,
linux-i2c, linux-iio, linux-media, linux-mmc, linux-mtd,
linux-gpio, linux-rtc, linux-serial, linux-usb, linux-watchdog,
linux-clk
Quoting Arnd Bergmann (2022-10-21 13:27:35)
> From: Arnd Bergmann <arnd@arndb.de>
>
> A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
> similar symbols that are no longer available with the platform gone,
> though the drivers themselves are still used on newer platforms,
> so remove these hacks.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 11/21] clk: remove s3c24xx driver
2022-10-21 20:27 ` [PATCH 11/21] clk: remove s3c24xx driver Arnd Bergmann
2022-10-22 11:50 ` Chanwoo Choi
2022-10-24 12:37 ` Krzysztof Kozlowski
@ 2022-10-27 23:11 ` Stephen Boyd
2 siblings, 0 replies; 82+ messages in thread
From: Stephen Boyd @ 2022-10-27 23:11 UTC (permalink / raw)
To: Arnd Bergmann, Chanwoo Choi, Krzysztof Kozlowski,
Michael Turquette, Sylwester Nawrocki, Tomasz Figa,
linux-arm-kernel
Cc: linux-kernel, Ben Dooks, Simtec Linux Team, Arnd Bergmann,
Alim Akhtar, linux-samsung-soc, linux-clk
Quoting Arnd Bergmann (2022-10-21 13:27:44)
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform is gone, so the clk driver can be removed as
> well.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
Acked-by: Stephen Boyd <sboyd@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 07/21] power: remove s3c adc battery driver
2022-10-21 20:27 ` [PATCH 07/21] power: remove s3c adc battery driver Arnd Bergmann
2022-10-24 7:28 ` Lee Jones
2022-10-24 12:31 ` Krzysztof Kozlowski
@ 2022-10-28 14:18 ` Sebastian Reichel
2 siblings, 0 replies; 82+ messages in thread
From: Sebastian Reichel @ 2022-10-28 14:18 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, linux-kernel, Ben Dooks,
Simtec Linux Team, Arnd Bergmann, Rob Herring,
Greg Kroah-Hartman, Mauro Carvalho Chehab, Lukas Bulwahn,
Joe Perches, Hans de Goede, Linus Walleij, Luca Ceresoli,
Lee Jones, linux-pm
[-- Attachment #1.1: Type: text/plain, Size: 3310 bytes --]
Hi,
On Fri, Oct 21, 2022 at 10:27:40PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c-adc driver is removed along with the s3c24xx platform,
> so the battery driver is no longer needed either.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
I suppose queuing this via power-supply will result in temporary
build failures because the header is included in s3c24xx arch code.
So better to merge via the same tree that is killing the arch code:
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-- Sebastian
> MAINTAINERS | 7 -
> drivers/power/supply/Kconfig | 6 -
> drivers/power/supply/Makefile | 1 -
> drivers/power/supply/s3c_adc_battery.c | 453 -------------------------
> include/linux/s3c_adc_battery.h | 39 ---
> 5 files changed, 506 deletions(-)
> delete mode 100644 drivers/power/supply/s3c_adc_battery.c
> delete mode 100644 include/linux/s3c_adc_battery.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 071d64e2a7ca..2caf42b0328a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -17920,13 +17920,6 @@ S: Supported
> W: http://www.ibm.com/developerworks/linux/linux390/
> F: drivers/s390/scsi/zfcp_*
>
> -S3C ADC BATTERY DRIVER
> -M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> -L: linux-samsung-soc@vger.kernel.org
> -S: Odd Fixes
> -F: drivers/power/supply/s3c_adc_battery.c
> -F: include/linux/s3c_adc_battery.h
> -
> S3C24XX SD/MMC Driver
> M: Ben Dooks <ben-linux@fluff.org>
> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index 568b3ede993a..e2f8dfcdd2a9 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -406,12 +406,6 @@ config BATTERY_MAX1721X
> Say Y here to enable support for the MAX17211/MAX17215 standalone
> battery gas-gauge.
>
> -config BATTERY_S3C_ADC
> - tristate "Battery driver for Samsung ADC based monitoring"
> - depends on S3C_ADC
> - help
> - Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
> -
> config BATTERY_TWL4030_MADC
> tristate "TWL4030 MADC battery driver"
> depends on TWL4030_MADC
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index af43866b3980..8cb3c7f5c111 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -54,7 +54,6 @@ obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o
> obj-$(CONFIG_BATTERY_MAX1721X) += max1721x_battery.o
> obj-$(CONFIG_BATTERY_RT5033) += rt5033_battery.o
> obj-$(CONFIG_CHARGER_RT9455) += rt9455_charger.o
> -obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o
> obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o
> obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o
> obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
> diff --git a/drivers/power/supply/s3c_adc_battery.c b/drivers/power/supply/s3c_adc_battery.c
> deleted file mode 100644
> index 68d31a3bee48..000000000000
> diff --git a/include/linux/s3c_adc_battery.h b/include/linux/s3c_adc_battery.h
> deleted file mode 100644
> index 57f982c375f8..000000000000
> --
> 2.29.2
>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
* Re: [PATCH 14/21] dmaengine: remove s3c24xx driver
2022-10-21 20:27 ` [PATCH 14/21] dmaengine: remove s3c24xx driver Arnd Bergmann
2022-10-24 12:40 ` Krzysztof Kozlowski
@ 2022-11-04 14:14 ` Vinod Koul
1 sibling, 0 replies; 82+ messages in thread
From: Vinod Koul @ 2022-11-04 14:14 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-arm-kernel, Krzysztof Kozlowski, linux-kernel, Ben Dooks,
Simtec Linux Team, Arnd Bergmann, Alim Akhtar, dmaengine,
linux-samsung-soc
On 21-10-22, 22:27, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The s3c24xx platform was removed and this driver is no longer
> needed.
Applied, thanks
--
~Vinod
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 82+ messages in thread
end of thread, other threads:[~2022-11-04 14:16 UTC | newest]
Thread overview: 82+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
2022-10-21 20:27 ` [PATCH 01/21] ARM: s3c: remove all s3c24xx support Arnd Bergmann
2022-10-22 20:56 ` Heiko Stübner
2022-10-24 14:27 ` Arnd Bergmann
2022-10-24 15:45 ` Heiko Stübner
2022-10-24 12:25 ` Krzysztof Kozlowski
2022-10-27 23:10 ` Stephen Boyd
2022-10-21 20:27 ` [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks Arnd Bergmann
2022-10-21 22:33 ` Wolfram Sang
2022-10-22 11:24 ` Greg Kroah-Hartman
2022-10-22 14:02 ` Linus Walleij
2022-10-23 11:00 ` Jonathan Cameron
2022-10-23 18:08 ` Daniel Lezcano
2022-10-24 7:55 ` Miquel Raynal
2022-10-24 12:26 ` Krzysztof Kozlowski
2022-10-24 16:53 ` Ulf Hansson
2022-10-27 23:10 ` Stephen Boyd
2022-10-21 20:27 ` [PATCH 03/21] ARM: s3c: remove most s3c64xx board support Arnd Bergmann
2022-10-24 12:26 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 04/21] ARM: s3c: remove adc.c Arnd Bergmann
2022-10-24 11:37 ` Mark Brown
2022-10-24 12:27 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 05/21] ARM: s3c: simplify platform code Arnd Bergmann
2022-10-24 11:41 ` Mark Brown
2022-10-24 12:29 ` Krzysztof Kozlowski
2022-10-24 13:32 ` Arnd Bergmann
2022-10-24 14:13 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 06/21] ARM: s3c: remove s3c6400 support Arnd Bergmann
2022-10-24 12:30 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 07/21] power: remove s3c adc battery driver Arnd Bergmann
2022-10-24 7:28 ` Lee Jones
2022-10-24 7:42 ` Arnd Bergmann
2022-10-24 7:57 ` Lee Jones
2022-10-24 12:31 ` Krzysztof Kozlowski
2022-10-28 14:18 ` Sebastian Reichel
2022-10-21 20:27 ` [PATCH 08/21] hwmon: remove s3c driver Arnd Bergmann
2022-10-22 4:02 ` Guenter Roeck
2022-10-22 8:36 ` Arnd Bergmann
2022-10-24 12:31 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 09/21] pata: remove samsung_cf driver Arnd Bergmann
2022-10-23 14:35 ` Sergey Shtylyov
2022-10-23 22:41 ` Damien Le Moal
2022-10-23 22:43 ` Damien Le Moal
2022-10-24 14:24 ` Arnd Bergmann
2022-10-24 12:34 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 10/21] mmc: remove s3cmci driver Arnd Bergmann
2022-10-24 12:35 ` Krzysztof Kozlowski
2022-10-24 16:52 ` Ulf Hansson
2022-10-21 20:27 ` [PATCH 11/21] clk: remove s3c24xx driver Arnd Bergmann
2022-10-22 11:50 ` Chanwoo Choi
2022-10-24 12:37 ` Krzysztof Kozlowski
2022-10-27 23:11 ` Stephen Boyd
2022-10-21 20:27 ` [PATCH 12/21] leds: " Arnd Bergmann
2022-10-22 10:04 ` Pavel Machek
2022-10-24 12:37 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 13/21] usb: gadget: remove s3c24xx drivers Arnd Bergmann
2022-10-24 12:39 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 14/21] dmaengine: remove s3c24xx driver Arnd Bergmann
2022-10-24 12:40 ` Krzysztof Kozlowski
2022-11-04 14:14 ` Vinod Koul
2022-10-21 20:27 ` [PATCH 15/21] cpufreq: remove s3c24xx drivers Arnd Bergmann
2022-10-24 12:40 ` Krzysztof Kozlowski
2022-10-25 5:19 ` Viresh Kumar
2022-10-21 20:27 ` [PATCH 16/21] fbdev: remove s3c2410 framebuffer Arnd Bergmann
2022-10-24 12:49 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 17/21] input: remove s3c24xx touchscreen driver Arnd Bergmann
2022-10-24 11:57 ` Dmitry Torokhov
2022-10-24 12:50 ` Krzysztof Kozlowski
2022-10-24 13:02 ` Arnd Bergmann
2022-10-21 20:27 ` [PATCH 18/21] pinctrl: remove s3c24xx driver Arnd Bergmann
2022-10-21 21:25 ` Linus Walleij
2022-10-24 12:51 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 19/21] spi: " Arnd Bergmann
2022-10-24 12:52 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 20/21] soc: s3c: remove pm-debug hack Arnd Bergmann
2022-10-24 12:52 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 21/21] ASoC: samsung: remove unused drivers Arnd Bergmann
2022-10-24 12:53 ` Krzysztof Kozlowski
2022-10-22 15:18 ` [PATCH 00/21] ARM: s3c: clean out obsolete platforms Krzysztof Kozlowski
2022-10-22 19:48 ` Arnd Bergmann
2022-10-24 13:00 ` Rob Herring
2022-10-24 13:18 ` Arnd Bergmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).