linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/2] at91-sama5d2_shdwc shutdown controller
@ 2019-12-20 15:31 Claudiu Beznea
  2019-12-20 15:31 ` [PATCH v2 1/2] power: reset: at91-poweroff: introduce struct shdwc_reg_config Claudiu Beznea
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Claudiu Beznea @ 2019-12-20 15:31 UTC (permalink / raw)
  To: nicolas.ferre, sre, alexandre.belloni
  Cc: Claudiu Beznea, linux-kernel, linux-arm-kernel, linux-pm

PMC master clock register offset is different b/w sam9x60 and
other SoCs. Since there is a need of this register offset in
shutdown procedure we need to have it per SoC. This is what
this series does.

Changes in v2:
- do not use r5 as intermediary registers in at91_poweroff 

Claudiu Beznea (2):
  power: reset: at91-poweroff: introduce struct shdwc_reg_config
  power: reset: at91-poweroff: use proper master clock register offset

 drivers/power/reset/at91-sama5d2_shdwc.c | 72 +++++++++++++++++++++-----------
 1 file changed, 47 insertions(+), 25 deletions(-)

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 7+ messages in thread
* [PATCH v2 1/2] power: reset: at91-poweroff: introduce struct shdwc_reg_config
  2019-12-20 15:31 [PATCH v2 0/2] at91-sama5d2_shdwc shutdown controller Claudiu Beznea
@ 2019-12-20 15:31 ` Claudiu Beznea
  2019-12-20 15:42   ` Nicolas.Ferre
  2019-12-20 15:31 ` [PATCH v2 2/2] power: reset: at91-poweroff: use proper master clock register offset Claudiu Beznea
  2020-01-14 10:34 ` [PATCH v2 0/2] at91-sama5d2_shdwc shutdown controller Claudiu.Beznea
  2 siblings, 1 reply; 7+ messages in thread
From: Claudiu Beznea @ 2019-12-20 15:31 UTC (permalink / raw)
  To: nicolas.ferre, sre, alexandre.belloni
  Cc: Claudiu Beznea, linux-kernel, linux-arm-kernel, linux-pm

This driver uses AT91_PMC_MCKR in poweroff() function. But the
SAM9X60's PMC versions maps AT91_PMC_MCKR functionality at different
offset compared to the SAMA5D2's one. This patch prepares the field
so that different AT91_PMC_MCKR's offsets to be introduced in
struct reg_config so that proper offset to be used for AT91_PMC_MCKR
based on compatible string.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/power/reset/at91-sama5d2_shdwc.c | 54 +++++++++++++++++++-------------
 1 file changed, 32 insertions(+), 22 deletions(-)

diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
index 1c18f465a245..84806d20846b 100644
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -66,7 +66,7 @@
 
 #define SHDW_CFG_NOT_USED	(32)
 
-struct shdwc_config {
+struct shdwc_reg_config {
 	u8 wkup_pin_input;
 	u8 mr_rtcwk_shift;
 	u8 mr_rttwk_shift;
@@ -74,8 +74,12 @@ struct shdwc_config {
 	u8 sr_rttwk_shift;
 };
 
+struct reg_config {
+	struct shdwc_reg_config shdwc;
+};
+
 struct shdwc {
-	const struct shdwc_config *cfg;
+	const struct reg_config *rcfg;
 	struct clk *sclk;
 	void __iomem *shdwc_base;
 	void __iomem *mpddrc_base;
@@ -95,6 +99,7 @@ static const unsigned long long sdwc_dbc_period[] = {
 static void __init at91_wakeup_status(struct platform_device *pdev)
 {
 	struct shdwc *shdw = platform_get_drvdata(pdev);
+	const struct reg_config *rcfg = shdw->rcfg;
 	u32 reg;
 	char *reason = "unknown";
 
@@ -106,11 +111,11 @@ static void __init at91_wakeup_status(struct platform_device *pdev)
 	if (!reg)
 		return;
 
-	if (SHDW_WK_PIN(reg, shdw->cfg))
+	if (SHDW_WK_PIN(reg, &rcfg->shdwc))
 		reason = "WKUP pin";
-	else if (SHDW_RTCWK(reg, shdw->cfg))
+	else if (SHDW_RTCWK(reg, &rcfg->shdwc))
 		reason = "RTC";
-	else if (SHDW_RTTWK(reg, shdw->cfg))
+	else if (SHDW_RTTWK(reg, &rcfg->shdwc))
 		reason = "RTT";
 
 	pr_info("AT91: Wake-Up source: %s\n", reason);
@@ -215,6 +220,7 @@ static u32 at91_shdwc_get_wakeup_input(struct platform_device *pdev,
 static void at91_shdwc_dt_configure(struct platform_device *pdev)
 {
 	struct shdwc *shdw = platform_get_drvdata(pdev);
+	const struct reg_config *rcfg = shdw->rcfg;
 	struct device_node *np = pdev->dev.of_node;
 	u32 mode = 0, tmp, input;
 
@@ -227,10 +233,10 @@ static void at91_shdwc_dt_configure(struct platform_device *pdev)
 		mode |= AT91_SHDW_WKUPDBC(at91_shdwc_debouncer_value(pdev, tmp));
 
 	if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
-		mode |= SHDW_RTCWKEN(shdw->cfg);
+		mode |= SHDW_RTCWKEN(&rcfg->shdwc);
 
 	if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
-		mode |= SHDW_RTTWKEN(shdw->cfg);
+		mode |= SHDW_RTTWKEN(&rcfg->shdwc);
 
 	dev_dbg(&pdev->dev, "%s: mode = %#x\n", __func__, mode);
 	writel(mode, shdw->shdwc_base + AT91_SHDW_MR);
@@ -239,30 +245,34 @@ static void at91_shdwc_dt_configure(struct platform_device *pdev)
 	writel(input, shdw->shdwc_base + AT91_SHDW_WUIR);
 }
 
-static const struct shdwc_config sama5d2_shdwc_config = {
-	.wkup_pin_input = 0,
-	.mr_rtcwk_shift = 17,
-	.mr_rttwk_shift	= SHDW_CFG_NOT_USED,
-	.sr_rtcwk_shift = 5,
-	.sr_rttwk_shift = SHDW_CFG_NOT_USED,
+static const struct reg_config sama5d2_reg_config = {
+	.shdwc = {
+		.wkup_pin_input = 0,
+		.mr_rtcwk_shift = 17,
+		.mr_rttwk_shift	= SHDW_CFG_NOT_USED,
+		.sr_rtcwk_shift = 5,
+		.sr_rttwk_shift = SHDW_CFG_NOT_USED,
+	},
 };
 
-static const struct shdwc_config sam9x60_shdwc_config = {
-	.wkup_pin_input = 0,
-	.mr_rtcwk_shift = 17,
-	.mr_rttwk_shift = 16,
-	.sr_rtcwk_shift = 5,
-	.sr_rttwk_shift = 4,
+static const struct reg_config sam9x60_reg_config = {
+	.shdwc = {
+		.wkup_pin_input = 0,
+		.mr_rtcwk_shift = 17,
+		.mr_rttwk_shift = 16,
+		.sr_rtcwk_shift = 5,
+		.sr_rttwk_shift = 4,
+	},
 };
 
 static const struct of_device_id at91_shdwc_of_match[] = {
 	{
 		.compatible = "atmel,sama5d2-shdwc",
-		.data = &sama5d2_shdwc_config,
+		.data = &sama5d2_reg_config,
 	},
 	{
 		.compatible = "microchip,sam9x60-shdwc",
-		.data = &sam9x60_shdwc_config,
+		.data = &sam9x60_reg_config,
 	}, {
 		/*sentinel*/
 	}
@@ -303,7 +313,7 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
 	}
 
 	match = of_match_node(at91_shdwc_of_match, pdev->dev.of_node);
-	at91_shdwc->cfg = match->data;
+	at91_shdwc->rcfg = match->data;
 
 	at91_shdwc->sclk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(at91_shdwc->sclk))
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 7+ messages in thread
* [PATCH v2 2/2] power: reset: at91-poweroff: use proper master clock register offset
  2019-12-20 15:31 [PATCH v2 0/2] at91-sama5d2_shdwc shutdown controller Claudiu Beznea
  2019-12-20 15:31 ` [PATCH v2 1/2] power: reset: at91-poweroff: introduce struct shdwc_reg_config Claudiu Beznea
@ 2019-12-20 15:31 ` Claudiu Beznea
  2019-12-20 15:42   ` Nicolas.Ferre
  2020-01-14 10:34 ` [PATCH v2 0/2] at91-sama5d2_shdwc shutdown controller Claudiu.Beznea
  2 siblings, 1 reply; 7+ messages in thread
From: Claudiu Beznea @ 2019-12-20 15:31 UTC (permalink / raw)
  To: nicolas.ferre, sre, alexandre.belloni
  Cc: Claudiu Beznea, linux-kernel, linux-arm-kernel, linux-pm

SAM9X60's PMC uses different offset for master clock register.
Add a member of type struct pmc_reg_config in struct reg_config,
fill it correspondingly for SAMA5D2 and SAM9X60 and use it in
poweroff() function.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/power/reset/at91-sama5d2_shdwc.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
index 84806d20846b..2fe3a627cb53 100644
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -74,8 +74,13 @@ struct shdwc_reg_config {
 	u8 sr_rttwk_shift;
 };
 
+struct pmc_reg_config {
+	u8 mckr;
+};
+
 struct reg_config {
 	struct shdwc_reg_config shdwc;
+	struct pmc_reg_config pmc;
 };
 
 struct shdwc {
@@ -136,9 +141,9 @@ static void at91_poweroff(void)
 		"	str	%1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
 
 		/* Switch the master clock source to slow clock. */
-		"1:	ldr	r6, [%4, #" __stringify(AT91_PMC_MCKR) "]\n\t"
+		"1:	ldr	r6, [%4, %5]\n\t"
 		"	bic	r6, r6,  #" __stringify(AT91_PMC_CSS) "\n\t"
-		"	str	r6, [%4, #" __stringify(AT91_PMC_MCKR) "]\n\t"
+		"	str	r6, [%4, %5]\n\t"
 		/* Wait for clock switch. */
 		"2:	ldr	r6, [%4, #" __stringify(AT91_PMC_SR) "]\n\t"
 		"	tst	r6, #"	    __stringify(AT91_PMC_MCKRDY) "\n\t"
@@ -153,7 +158,8 @@ static void at91_poweroff(void)
 		  "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF),
 		  "r" (at91_shdwc->shdwc_base),
 		  "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW),
-		  "r" (at91_shdwc->pmc_base)
+		  "r" (at91_shdwc->pmc_base),
+		  "r" (at91_shdwc->rcfg->pmc.mckr)
 		: "r6");
 }
 
@@ -253,6 +259,9 @@ static const struct reg_config sama5d2_reg_config = {
 		.sr_rtcwk_shift = 5,
 		.sr_rttwk_shift = SHDW_CFG_NOT_USED,
 	},
+	.pmc = {
+		.mckr		= 0x30,
+	},
 };
 
 static const struct reg_config sam9x60_reg_config = {
@@ -263,6 +272,9 @@ static const struct reg_config sam9x60_reg_config = {
 		.sr_rtcwk_shift = 5,
 		.sr_rttwk_shift = 4,
 	},
+	.pmc = {
+		.mckr		= 0x28,
+	},
 };
 
 static const struct of_device_id at91_shdwc_of_match[] = {
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/2] power: reset: at91-poweroff: introduce struct shdwc_reg_config
  2019-12-20 15:31 ` [PATCH v2 1/2] power: reset: at91-poweroff: introduce struct shdwc_reg_config Claudiu Beznea
@ 2019-12-20 15:42   ` Nicolas.Ferre
  0 siblings, 0 replies; 7+ messages in thread
From: Nicolas.Ferre @ 2019-12-20 15:42 UTC (permalink / raw)
  To: Claudiu.Beznea, sre, alexandre.belloni
  Cc: linux-kernel, linux-arm-kernel, linux-pm

Le vendredi 20 décembre 2019 à 17:31 +0200, Claudiu Beznea a écrit :
> This driver uses AT91_PMC_MCKR in poweroff() function. But the
> SAM9X60's PMC versions maps AT91_PMC_MCKR functionality at different
> offset compared to the SAMA5D2's one. This patch prepares the field
> so that different AT91_PMC_MCKR's offsets to be introduced in
> struct reg_config so that proper offset to be used for AT91_PMC_MCKR
> based on compatible string.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>

> ---
>  drivers/power/reset/at91-sama5d2_shdwc.c | 54 +++++++++++++++++++--------
> -----
>  1 file changed, 32 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c
> b/drivers/power/reset/at91-sama5d2_shdwc.c
> index 1c18f465a245..84806d20846b 100644
> --- a/drivers/power/reset/at91-sama5d2_shdwc.c
> +++ b/drivers/power/reset/at91-sama5d2_shdwc.c
> @@ -66,7 +66,7 @@
>  
>  #define SHDW_CFG_NOT_USED	(32)
>  
> -struct shdwc_config {
> +struct shdwc_reg_config {
>  	u8 wkup_pin_input;
>  	u8 mr_rtcwk_shift;
>  	u8 mr_rttwk_shift;
> @@ -74,8 +74,12 @@ struct shdwc_config {
>  	u8 sr_rttwk_shift;
>  };
>  
> +struct reg_config {
> +	struct shdwc_reg_config shdwc;
> +};
> +
>  struct shdwc {
> -	const struct shdwc_config *cfg;
> +	const struct reg_config *rcfg;
>  	struct clk *sclk;
>  	void __iomem *shdwc_base;
>  	void __iomem *mpddrc_base;
> @@ -95,6 +99,7 @@ static const unsigned long long sdwc_dbc_period[] = {
>  static void __init at91_wakeup_status(struct platform_device *pdev)
>  {
>  	struct shdwc *shdw = platform_get_drvdata(pdev);
> +	const struct reg_config *rcfg = shdw->rcfg;
>  	u32 reg;
>  	char *reason = "unknown";
>  
> @@ -106,11 +111,11 @@ static void __init at91_wakeup_status(struct
> platform_device *pdev)
>  	if (!reg)
>  		return;
>  
> -	if (SHDW_WK_PIN(reg, shdw->cfg))
> +	if (SHDW_WK_PIN(reg, &rcfg->shdwc))
>  		reason = "WKUP pin";
> -	else if (SHDW_RTCWK(reg, shdw->cfg))
> +	else if (SHDW_RTCWK(reg, &rcfg->shdwc))
>  		reason = "RTC";
> -	else if (SHDW_RTTWK(reg, shdw->cfg))
> +	else if (SHDW_RTTWK(reg, &rcfg->shdwc))
>  		reason = "RTT";
>  
>  	pr_info("AT91: Wake-Up source: %s\n", reason);
> @@ -215,6 +220,7 @@ static u32 at91_shdwc_get_wakeup_input(struct
> platform_device *pdev,
>  static void at91_shdwc_dt_configure(struct platform_device *pdev)
>  {
>  	struct shdwc *shdw = platform_get_drvdata(pdev);
> +	const struct reg_config *rcfg = shdw->rcfg;
>  	struct device_node *np = pdev->dev.of_node;
>  	u32 mode = 0, tmp, input;
>  
> @@ -227,10 +233,10 @@ static void at91_shdwc_dt_configure(struct
> platform_device *pdev)
>  		mode |= AT91_SHDW_WKUPDBC(at91_shdwc_debouncer_value(pdev,
> tmp));
>  
>  	if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
> -		mode |= SHDW_RTCWKEN(shdw->cfg);
> +		mode |= SHDW_RTCWKEN(&rcfg->shdwc);
>  
>  	if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
> -		mode |= SHDW_RTTWKEN(shdw->cfg);
> +		mode |= SHDW_RTTWKEN(&rcfg->shdwc);
>  
>  	dev_dbg(&pdev->dev, "%s: mode = %#x\n", __func__, mode);
>  	writel(mode, shdw->shdwc_base + AT91_SHDW_MR);
> @@ -239,30 +245,34 @@ static void at91_shdwc_dt_configure(struct
> platform_device *pdev)
>  	writel(input, shdw->shdwc_base + AT91_SHDW_WUIR);
>  }
>  
> -static const struct shdwc_config sama5d2_shdwc_config = {
> -	.wkup_pin_input = 0,
> -	.mr_rtcwk_shift = 17,
> -	.mr_rttwk_shift	= SHDW_CFG_NOT_USED,
> -	.sr_rtcwk_shift = 5,
> -	.sr_rttwk_shift = SHDW_CFG_NOT_USED,
> +static const struct reg_config sama5d2_reg_config = {
> +	.shdwc = {
> +		.wkup_pin_input = 0,
> +		.mr_rtcwk_shift = 17,
> +		.mr_rttwk_shift	= SHDW_CFG_NOT_USED,
> +		.sr_rtcwk_shift = 5,
> +		.sr_rttwk_shift = SHDW_CFG_NOT_USED,
> +	},
>  };
>  
> -static const struct shdwc_config sam9x60_shdwc_config = {
> -	.wkup_pin_input = 0,
> -	.mr_rtcwk_shift = 17,
> -	.mr_rttwk_shift = 16,
> -	.sr_rtcwk_shift = 5,
> -	.sr_rttwk_shift = 4,
> +static const struct reg_config sam9x60_reg_config = {
> +	.shdwc = {
> +		.wkup_pin_input = 0,
> +		.mr_rtcwk_shift = 17,
> +		.mr_rttwk_shift = 16,
> +		.sr_rtcwk_shift = 5,
> +		.sr_rttwk_shift = 4,
> +	},
>  };
>  
>  static const struct of_device_id at91_shdwc_of_match[] = {
>  	{
>  		.compatible = "atmel,sama5d2-shdwc",
> -		.data = &sama5d2_shdwc_config,
> +		.data = &sama5d2_reg_config,
>  	},
>  	{
>  		.compatible = "microchip,sam9x60-shdwc",
> -		.data = &sam9x60_shdwc_config,
> +		.data = &sam9x60_reg_config,
>  	}, {
>  		/*sentinel*/
>  	}
> @@ -303,7 +313,7 @@ static int __init at91_shdwc_probe(struct
> platform_device *pdev)
>  	}
>  
>  	match = of_match_node(at91_shdwc_of_match, pdev->dev.of_node);
> -	at91_shdwc->cfg = match->data;
> +	at91_shdwc->rcfg = match->data;
>  
>  	at91_shdwc->sclk = devm_clk_get(&pdev->dev, NULL);
>  	if (IS_ERR(at91_shdwc->sclk))
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 7+ messages in thread
* Re: [PATCH v2 2/2] power: reset: at91-poweroff: use proper master clock register offset
  2019-12-20 15:31 ` [PATCH v2 2/2] power: reset: at91-poweroff: use proper master clock register offset Claudiu Beznea
@ 2019-12-20 15:42   ` Nicolas.Ferre
  0 siblings, 0 replies; 7+ messages in thread
From: Nicolas.Ferre @ 2019-12-20 15:42 UTC (permalink / raw)
  To: Claudiu.Beznea, sre, alexandre.belloni
  Cc: linux-kernel, linux-arm-kernel, linux-pm

Le vendredi 20 décembre 2019 à 17:31 +0200, Claudiu Beznea a écrit :
> SAM9X60's PMC uses different offset for master clock register.
> Add a member of type struct pmc_reg_config in struct reg_config,
> fill it correspondingly for SAMA5D2 and SAM9X60 and use it in
> poweroff() function.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>

> ---
>  drivers/power/reset/at91-sama5d2_shdwc.c | 18 +++++++++++++++---
>  1 file changed, 15 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c
> b/drivers/power/reset/at91-sama5d2_shdwc.c
> index 84806d20846b..2fe3a627cb53 100644
> --- a/drivers/power/reset/at91-sama5d2_shdwc.c
> +++ b/drivers/power/reset/at91-sama5d2_shdwc.c
> @@ -74,8 +74,13 @@ struct shdwc_reg_config {
>  	u8 sr_rttwk_shift;
>  };
>  
> +struct pmc_reg_config {
> +	u8 mckr;
> +};
> +
>  struct reg_config {
>  	struct shdwc_reg_config shdwc;
> +	struct pmc_reg_config pmc;
>  };
>  
>  struct shdwc {
> @@ -136,9 +141,9 @@ static void at91_poweroff(void)
>  		"	str	%1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
>  
>  		/* Switch the master clock source to slow clock. */
> -		"1:	ldr	r6, [%4, #" __stringify(AT91_PMC_MCKR)
> "]\n\t"
> +		"1:	ldr	r6, [%4, %5]\n\t"
>  		"	bic	r6, r6,  #" __stringify(AT91_PMC_CSS) "\n\t"
> -		"	str	r6, [%4, #" __stringify(AT91_PMC_MCKR) "]\n\t"
> +		"	str	r6, [%4, %5]\n\t"
>  		/* Wait for clock switch. */
>  		"2:	ldr	r6, [%4, #" __stringify(AT91_PMC_SR) "]\n\t"
>  		"	tst	r6, #"	    __stringify(AT91_PMC_MCKRDY) "\n\t"
> @@ -153,7 +158,8 @@ static void at91_poweroff(void)
>  		  "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF),
>  		  "r" (at91_shdwc->shdwc_base),
>  		  "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW),
> -		  "r" (at91_shdwc->pmc_base)
> +		  "r" (at91_shdwc->pmc_base),
> +		  "r" (at91_shdwc->rcfg->pmc.mckr)
>  		: "r6");
>  }
>  
> @@ -253,6 +259,9 @@ static const struct reg_config sama5d2_reg_config = {
>  		.sr_rtcwk_shift = 5,
>  		.sr_rttwk_shift = SHDW_CFG_NOT_USED,
>  	},
> +	.pmc = {
> +		.mckr		= 0x30,
> +	},
>  };
>  
>  static const struct reg_config sam9x60_reg_config = {
> @@ -263,6 +272,9 @@ static const struct reg_config sam9x60_reg_config = {
>  		.sr_rtcwk_shift = 5,
>  		.sr_rttwk_shift = 4,
>  	},
> +	.pmc = {
> +		.mckr		= 0x28,
> +	},
>  };
>  
>  static const struct of_device_id at91_shdwc_of_match[] = {
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 7+ messages in thread
* Re: [PATCH v2 0/2] at91-sama5d2_shdwc shutdown controller
  2019-12-20 15:31 [PATCH v2 0/2] at91-sama5d2_shdwc shutdown controller Claudiu Beznea
  2019-12-20 15:31 ` [PATCH v2 1/2] power: reset: at91-poweroff: introduce struct shdwc_reg_config Claudiu Beznea
  2019-12-20 15:31 ` [PATCH v2 2/2] power: reset: at91-poweroff: use proper master clock register offset Claudiu Beznea
@ 2020-01-14 10:34 ` Claudiu.Beznea
  2020-01-15 20:52   ` Sebastian Reichel
  2 siblings, 1 reply; 7+ messages in thread
From: Claudiu.Beznea @ 2020-01-14 10:34 UTC (permalink / raw)
  To: Nicolas.Ferre, sre, alexandre.belloni
  Cc: linux-kernel, linux-arm-kernel, linux-pm

Hi Sebastien,

I know you may busy, I just want to be sure that you didn't forgot this series.

Thank you,
Claudiu Beznea

On 20.12.2019 17:31, Claudiu Beznea wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> PMC master clock register offset is different b/w sam9x60 and
> other SoCs. Since there is a need of this register offset in
> shutdown procedure we need to have it per SoC. This is what
> this series does.
> 
> Changes in v2:
> - do not use r5 as intermediary registers in at91_poweroff
> 
> Claudiu Beznea (2):
>   power: reset: at91-poweroff: introduce struct shdwc_reg_config
>   power: reset: at91-poweroff: use proper master clock register offset
> 
>  drivers/power/reset/at91-sama5d2_shdwc.c | 72 +++++++++++++++++++++-----------
>  1 file changed, 47 insertions(+), 25 deletions(-)
> 
> --
> 2.7.4
> 
> 
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 7+ messages in thread
* Re: [PATCH v2 0/2] at91-sama5d2_shdwc shutdown controller
  2020-01-14 10:34 ` [PATCH v2 0/2] at91-sama5d2_shdwc shutdown controller Claudiu.Beznea
@ 2020-01-15 20:52   ` Sebastian Reichel
  0 siblings, 0 replies; 7+ messages in thread
From: Sebastian Reichel @ 2020-01-15 20:52 UTC (permalink / raw)
  To: Claudiu.Beznea
  Cc: linux-kernel, alexandre.belloni, linux-arm-kernel, linux-pm


[-- Attachment #1.1: Type: text/plain, Size: 1206 bytes --]

Hi

It wasn't lost, I just did not yet collect patches for the next
merge window. I queued the complete patchset to my for-next branch
now.

-- Sebastian

On Tue, Jan 14, 2020 at 10:34:55AM +0000, Claudiu.Beznea@microchip.com wrote:
> Hi Sebastian,
> 
> I know you may busy, I just want to be sure that you didn't forgot this series.
> 
> Thank you,
> Claudiu Beznea
> 
> On 20.12.2019 17:31, Claudiu Beznea wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> > 
> > PMC master clock register offset is different b/w sam9x60 and
> > other SoCs. Since there is a need of this register offset in
> > shutdown procedure we need to have it per SoC. This is what
> > this series does.
> > 
> > Changes in v2:
> > - do not use r5 as intermediary registers in at91_poweroff
> > 
> > Claudiu Beznea (2):
> >   power: reset: at91-poweroff: introduce struct shdwc_reg_config
> >   power: reset: at91-poweroff: use proper master clock register offset
> > 
> >  drivers/power/reset/at91-sama5d2_shdwc.c | 72 +++++++++++++++++++++-----------
> >  1 file changed, 47 insertions(+), 25 deletions(-)
> > 
> > --
> > 2.7.4
> > 
> > 

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-01-15 20:52 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-20 15:31 [PATCH v2 0/2] at91-sama5d2_shdwc shutdown controller Claudiu Beznea
2019-12-20 15:31 ` [PATCH v2 1/2] power: reset: at91-poweroff: introduce struct shdwc_reg_config Claudiu Beznea
2019-12-20 15:42   ` Nicolas.Ferre
2019-12-20 15:31 ` [PATCH v2 2/2] power: reset: at91-poweroff: use proper master clock register offset Claudiu Beznea
2019-12-20 15:42   ` Nicolas.Ferre
2020-01-14 10:34 ` [PATCH v2 0/2] at91-sama5d2_shdwc shutdown controller Claudiu.Beznea
2020-01-15 20:52   ` Sebastian Reichel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).