* [PATCH 1/2] dt-bindings: Add vendor prefix for oceanic @ 2019-02-26 6:02 Jagan Teki 2019-02-26 6:02 ` [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support Jagan Teki 0 siblings, 1 reply; 12+ messages in thread From: Jagan Teki @ 2019-02-26 6:02 UTC (permalink / raw) To: Maxime Ripard, Chen-Yu Tsai, Rob Herring, Mark Rutland Cc: devicetree, Ryan Pannell, linux-kernel, Jagan Teki, Michael Trimarchi, linux-amarula, linux-arm-kernel Add oceanic vendor prefix. Oceanic Systems (UK) Ltd design and manufacture world-class marine systems for control and monitoring vessels. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index f42e12eb9d64..5b551407f487 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -285,6 +285,7 @@ nuvoton Nuvoton Technology Corporation nvd New Vision Display nvidia NVIDIA nxp NXP Semiconductors +oceanic Oceanic Systems (UK) Ltd. okaya Okaya Electric America, Inc. oki Oki Electric Industry Co., Ltd. olimex OLIMEX Ltd. -- 2.18.0.321.gffc6fa0e3 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support 2019-02-26 6:02 [PATCH 1/2] dt-bindings: Add vendor prefix for oceanic Jagan Teki @ 2019-02-26 6:02 ` Jagan Teki 2019-02-27 15:33 ` Maxime Ripard 0 siblings, 1 reply; 12+ messages in thread From: Jagan Teki @ 2019-02-26 6:02 UTC (permalink / raw) To: Maxime Ripard, Chen-Yu Tsai, Rob Herring, Mark Rutland Cc: devicetree, Ryan Pannell, linux-kernel, Jagan Teki, Michael Trimarchi, linux-amarula, linux-arm-kernel Oceanic A64-5inMFD is a 5 inch Multi function display baseboard designed to mount SoPine SOM. Key features: - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 2GB DDR3 RAM - SD Slot - SPI-NOR flash - EMAC, RTL8211E - MCP2515 CAN - MIPI-DSI - Goodix 911 CTP - USB Host - 12V DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../allwinner/sun50i-a64-oceanic-5inmfd.dts | 46 +++++++++++++++++++ 2 files changed, 47 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index a5fb1eaa8acf..ec39fe856117 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb sun50i-a64-bananapi-m64-icn6211.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5inmfd.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts new file mode 100644 index 000000000000..d73d1f55acb9 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Oceanic Systems (UK) Ltd. + * Copyright (C) 2019 Amarula Solutions B.V. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +/dts-v1/; + +#include "sun50i-a64-sopine.dtsi" + +/ { + model = "Oceanic A64-5inMFD"; + compatible = "oceanic,a64-5inmfd", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; -- 2.18.0.321.gffc6fa0e3 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support 2019-02-26 6:02 ` [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support Jagan Teki @ 2019-02-27 15:33 ` Maxime Ripard 2019-02-27 16:19 ` Jagan Teki 0 siblings, 1 reply; 12+ messages in thread From: Maxime Ripard @ 2019-02-27 15:33 UTC (permalink / raw) To: Jagan Teki Cc: Mark Rutland, devicetree, Ryan Pannell, linux-kernel, Chen-Yu Tsai, Rob Herring, Michael Trimarchi, linux-amarula, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 2893 bytes --] Hi, On Tue, Feb 26, 2019 at 11:32:40AM +0530, Jagan Teki wrote: > Oceanic A64-5inMFD is a 5 inch Multi function display baseboard > designed to mount SoPine SOM. > > Key features: > - Allwinner A64 Cortex-A53 > - Mali-400MP2 GPU > - AXP803 PMIC > - 2GB DDR3 RAM > - SD Slot > - SPI-NOR flash > - EMAC, RTL8211E > - MCP2515 CAN > - MIPI-DSI > - Goodix 911 CTP > - USB Host > - 12V DC power supply > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > arch/arm64/boot/dts/allwinner/Makefile | 1 + > .../allwinner/sun50i-a64-oceanic-5inmfd.dts | 46 +++++++++++++++++++ > 2 files changed, 47 insertions(+) > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile > index a5fb1eaa8acf..ec39fe856117 100644 > --- a/arch/arm64/boot/dts/allwinner/Makefile > +++ b/arch/arm64/boot/dts/allwinner/Makefile > @@ -2,6 +2,7 @@ > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb sun50i-a64-bananapi-m64-icn6211.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5inmfd.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > new file mode 100644 > index 000000000000..d73d1f55acb9 > --- /dev/null > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > @@ -0,0 +1,46 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (C) 2019 Oceanic Systems (UK) Ltd. > + * Copyright (C) 2019 Amarula Solutions B.V. > + * Author: Jagan Teki <jagan@amarulasolutions.com> > + */ > + > +/dts-v1/; > + > +#include "sun50i-a64-sopine.dtsi" > + > +/ { > + model = "Oceanic A64-5inMFD"; > + compatible = "oceanic,a64-5inmfd", "allwinner,sun50i-a64"; The name of the DT is Oceanic 5inMFD, while you call the board A64-5inMFD here, which name is the actual name? > + > + aliases { > + serial0 = &uart0; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&ehci0 { > + status = "okay"; > +}; > + > +&ohci0 { > + status = "okay"; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_pb_pins>; > + status = "okay"; > +}; > + > +&usb_otg { > + dr_mode = "host"; > + status = "okay"; > +}; > + > +&usbphy { > + status = "okay"; > +}; Is the OTG controller really is only capable of running in host mode? Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support 2019-02-27 15:33 ` Maxime Ripard @ 2019-02-27 16:19 ` Jagan Teki 2019-03-01 14:57 ` Maxime Ripard 0 siblings, 1 reply; 12+ messages in thread From: Jagan Teki @ 2019-02-27 16:19 UTC (permalink / raw) To: Maxime Ripard Cc: Mark Rutland, devicetree, Ryan Pannell, linux-kernel, Chen-Yu Tsai, Rob Herring, Michael Trimarchi, linux-amarula, linux-arm-kernel On Wed, Feb 27, 2019 at 9:03 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > Hi, > > On Tue, Feb 26, 2019 at 11:32:40AM +0530, Jagan Teki wrote: > > Oceanic A64-5inMFD is a 5 inch Multi function display baseboard > > designed to mount SoPine SOM. > > > > Key features: > > - Allwinner A64 Cortex-A53 > > - Mali-400MP2 GPU > > - AXP803 PMIC > > - 2GB DDR3 RAM > > - SD Slot > > - SPI-NOR flash > > - EMAC, RTL8211E > > - MCP2515 CAN > > - MIPI-DSI > > - Goodix 911 CTP > > - USB Host > > - 12V DC power supply > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > --- > > arch/arm64/boot/dts/allwinner/Makefile | 1 + > > .../allwinner/sun50i-a64-oceanic-5inmfd.dts | 46 +++++++++++++++++++ > > 2 files changed, 47 insertions(+) > > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > > > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile > > index a5fb1eaa8acf..ec39fe856117 100644 > > --- a/arch/arm64/boot/dts/allwinner/Makefile > > +++ b/arch/arm64/boot/dts/allwinner/Makefile > > @@ -2,6 +2,7 @@ > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb sun50i-a64-bananapi-m64-icn6211.dtb > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb > > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5inmfd.dtb > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > new file mode 100644 > > index 000000000000..d73d1f55acb9 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > @@ -0,0 +1,46 @@ > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > +/* > > + * Copyright (C) 2019 Oceanic Systems (UK) Ltd. > > + * Copyright (C) 2019 Amarula Solutions B.V. > > + * Author: Jagan Teki <jagan@amarulasolutions.com> > > + */ > > + > > +/dts-v1/; > > + > > +#include "sun50i-a64-sopine.dtsi" > > + > > +/ { > > + model = "Oceanic A64-5inMFD"; > > + compatible = "oceanic,a64-5inmfd", "allwinner,sun50i-a64"; > > The name of the DT is Oceanic 5inMFD, while you call the board > A64-5inMFD here, which name is the actual name? Yes, this is something that we discussed during "Amarula A64-Relic" naming convention. Since these boards are not famous like teres-i we agreed to add vendor name after sun50i-a64- followed by real board name. Here A64 already covered during sun50i-a64- so the dts name simply the <vendor_name>-<real_board_name> > > > + > > + aliases { > > + serial0 = &uart0; > > + }; > > + > > + chosen { > > + stdout-path = "serial0:115200n8"; > > + }; > > +}; > > + > > +&ehci0 { > > + status = "okay"; > > +}; > > + > > +&ohci0 { > > + status = "okay"; > > +}; > > + > > +&uart0 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&uart0_pb_pins>; > > + status = "okay"; > > +}; > > + > > +&usb_otg { > > + dr_mode = "host"; > > + status = "okay"; > > +}; > > + > > +&usbphy { > > + status = "okay"; > > +}; > > Is the OTG controller really is only capable of running in host mode? Yes, USB on baseboard is similar like sopine-baseboard _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support 2019-02-27 16:19 ` Jagan Teki @ 2019-03-01 14:57 ` Maxime Ripard 2019-03-01 16:57 ` Jagan Teki 0 siblings, 1 reply; 12+ messages in thread From: Maxime Ripard @ 2019-03-01 14:57 UTC (permalink / raw) To: Jagan Teki Cc: Mark Rutland, devicetree, Ryan Pannell, linux-kernel, Chen-Yu Tsai, Rob Herring, Michael Trimarchi, linux-amarula, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 4027 bytes --] On Wed, Feb 27, 2019 at 09:49:23PM +0530, Jagan Teki wrote: > On Wed, Feb 27, 2019 at 9:03 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > Hi, > > > > On Tue, Feb 26, 2019 at 11:32:40AM +0530, Jagan Teki wrote: > > > Oceanic A64-5inMFD is a 5 inch Multi function display baseboard > > > designed to mount SoPine SOM. > > > > > > Key features: > > > - Allwinner A64 Cortex-A53 > > > - Mali-400MP2 GPU > > > - AXP803 PMIC > > > - 2GB DDR3 RAM > > > - SD Slot > > > - SPI-NOR flash > > > - EMAC, RTL8211E > > > - MCP2515 CAN > > > - MIPI-DSI > > > - Goodix 911 CTP > > > - USB Host > > > - 12V DC power supply > > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > --- > > > arch/arm64/boot/dts/allwinner/Makefile | 1 + > > > .../allwinner/sun50i-a64-oceanic-5inmfd.dts | 46 +++++++++++++++++++ > > > 2 files changed, 47 insertions(+) > > > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile > > > index a5fb1eaa8acf..ec39fe856117 100644 > > > --- a/arch/arm64/boot/dts/allwinner/Makefile > > > +++ b/arch/arm64/boot/dts/allwinner/Makefile > > > @@ -2,6 +2,7 @@ > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb sun50i-a64-bananapi-m64-icn6211.dtb > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb > > > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5inmfd.dtb > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > > new file mode 100644 > > > index 000000000000..d73d1f55acb9 > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > > @@ -0,0 +1,46 @@ > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > +/* > > > + * Copyright (C) 2019 Oceanic Systems (UK) Ltd. > > > + * Copyright (C) 2019 Amarula Solutions B.V. > > > + * Author: Jagan Teki <jagan@amarulasolutions.com> > > > + */ > > > + > > > +/dts-v1/; > > > + > > > +#include "sun50i-a64-sopine.dtsi" > > > + > > > +/ { > > > + model = "Oceanic A64-5inMFD"; > > > + compatible = "oceanic,a64-5inmfd", "allwinner,sun50i-a64"; > > > > The name of the DT is Oceanic 5inMFD, while you call the board > > A64-5inMFD here, which name is the actual name? > > Yes, this is something that we discussed during "Amarula A64-Relic" > naming convention. > > Since these boards are not famous like teres-i we agreed to add vendor > name after sun50i-a64- followed by real board name. > > Here A64 already covered during sun50i-a64- so the dts name simply the > <vendor_name>-<real_board_name> For the DT name, yeah, we want that pattern. For the compatible and model, we want to use the model name. > > > > > + > > > + aliases { > > > + serial0 = &uart0; > > > + }; > > > + > > > + chosen { > > > + stdout-path = "serial0:115200n8"; > > > + }; > > > +}; > > > + > > > +&ehci0 { > > > + status = "okay"; > > > +}; > > > + > > > +&ohci0 { > > > + status = "okay"; > > > +}; > > > + > > > +&uart0 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&uart0_pb_pins>; > > > + status = "okay"; > > > +}; > > > + > > > +&usb_otg { > > > + dr_mode = "host"; > > > + status = "okay"; > > > +}; > > > + > > > +&usbphy { > > > + status = "okay"; > > > +}; > > > > Is the OTG controller really is only capable of running in host mode? > > Yes, USB on baseboard is similar like sopine-baseboard Ok Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support 2019-03-01 14:57 ` Maxime Ripard @ 2019-03-01 16:57 ` Jagan Teki 2019-03-05 15:59 ` Maxime Ripard 0 siblings, 1 reply; 12+ messages in thread From: Jagan Teki @ 2019-03-01 16:57 UTC (permalink / raw) To: Maxime Ripard Cc: Mark Rutland, devicetree, Ryan Pannell, linux-kernel, Chen-Yu Tsai, Rob Herring, Michael Trimarchi, linux-amarula, linux-arm-kernel On Fri, Mar 1, 2019 at 8:27 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > On Wed, Feb 27, 2019 at 09:49:23PM +0530, Jagan Teki wrote: > > On Wed, Feb 27, 2019 at 9:03 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > > > Hi, > > > > > > On Tue, Feb 26, 2019 at 11:32:40AM +0530, Jagan Teki wrote: > > > > Oceanic A64-5inMFD is a 5 inch Multi function display baseboard > > > > designed to mount SoPine SOM. > > > > > > > > Key features: > > > > - Allwinner A64 Cortex-A53 > > > > - Mali-400MP2 GPU > > > > - AXP803 PMIC > > > > - 2GB DDR3 RAM > > > > - SD Slot > > > > - SPI-NOR flash > > > > - EMAC, RTL8211E > > > > - MCP2515 CAN > > > > - MIPI-DSI > > > > - Goodix 911 CTP > > > > - USB Host > > > > - 12V DC power supply > > > > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > --- > > > > arch/arm64/boot/dts/allwinner/Makefile | 1 + > > > > .../allwinner/sun50i-a64-oceanic-5inmfd.dts | 46 +++++++++++++++++++ > > > > 2 files changed, 47 insertions(+) > > > > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile > > > > index a5fb1eaa8acf..ec39fe856117 100644 > > > > --- a/arch/arm64/boot/dts/allwinner/Makefile > > > > +++ b/arch/arm64/boot/dts/allwinner/Makefile > > > > @@ -2,6 +2,7 @@ > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb sun50i-a64-bananapi-m64-icn6211.dtb > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb > > > > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5inmfd.dtb > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > > > new file mode 100644 > > > > index 000000000000..d73d1f55acb9 > > > > --- /dev/null > > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > > > @@ -0,0 +1,46 @@ > > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > > +/* > > > > + * Copyright (C) 2019 Oceanic Systems (UK) Ltd. > > > > + * Copyright (C) 2019 Amarula Solutions B.V. > > > > + * Author: Jagan Teki <jagan@amarulasolutions.com> > > > > + */ > > > > + > > > > +/dts-v1/; > > > > + > > > > +#include "sun50i-a64-sopine.dtsi" > > > > + > > > > +/ { > > > > + model = "Oceanic A64-5inMFD"; > > > > + compatible = "oceanic,a64-5inmfd", "allwinner,sun50i-a64"; > > > > > > The name of the DT is Oceanic 5inMFD, while you call the board > > > A64-5inMFD here, which name is the actual name? > > > > Yes, this is something that we discussed during "Amarula A64-Relic" > > naming convention. > > > > Since these boards are not famous like teres-i we agreed to add vendor > > name after sun50i-a64- followed by real board name. > > > > Here A64 already covered during sun50i-a64- so the dts name simply the > > <vendor_name>-<real_board_name> > > For the DT name, yeah, we want that pattern. > > For the compatible and model, we want to use the model name. Entire model name after <vendor_name>, ? model = "Oceanic A64-5inMFD"; compatible = "oceanic,a64-5inmfd", "allwinner,sun50i-a64"; is this not sufficient? Let me understand with respective few existing stuff. model = "Amarula A64-Relic"; compatible = "amarula,a64-relic", "allwinner,sun50i-a64"; model = "Olimex A64 Teres-I" compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64"; model = "FriendlyARM NanoPi A64"; compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64"; model = "Olimex A64-Olinuxino"; compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64" Would you comment, what is the different with respect to my change? _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support 2019-03-01 16:57 ` Jagan Teki @ 2019-03-05 15:59 ` Maxime Ripard 2019-03-05 16:07 ` Jagan Teki 0 siblings, 1 reply; 12+ messages in thread From: Maxime Ripard @ 2019-03-05 15:59 UTC (permalink / raw) To: Jagan Teki Cc: Mark Rutland, devicetree, Ryan Pannell, linux-kernel, Chen-Yu Tsai, Rob Herring, Michael Trimarchi, linux-amarula, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 4879 bytes --] On Fri, Mar 01, 2019 at 10:27:14PM +0530, Jagan Teki wrote: > On Fri, Mar 1, 2019 at 8:27 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > On Wed, Feb 27, 2019 at 09:49:23PM +0530, Jagan Teki wrote: > > > On Wed, Feb 27, 2019 at 9:03 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > > > > > Hi, > > > > > > > > On Tue, Feb 26, 2019 at 11:32:40AM +0530, Jagan Teki wrote: > > > > > Oceanic A64-5inMFD is a 5 inch Multi function display baseboard > > > > > designed to mount SoPine SOM. > > > > > > > > > > Key features: > > > > > - Allwinner A64 Cortex-A53 > > > > > - Mali-400MP2 GPU > > > > > - AXP803 PMIC > > > > > - 2GB DDR3 RAM > > > > > - SD Slot > > > > > - SPI-NOR flash > > > > > - EMAC, RTL8211E > > > > > - MCP2515 CAN > > > > > - MIPI-DSI > > > > > - Goodix 911 CTP > > > > > - USB Host > > > > > - 12V DC power supply > > > > > > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > > --- > > > > > arch/arm64/boot/dts/allwinner/Makefile | 1 + > > > > > .../allwinner/sun50i-a64-oceanic-5inmfd.dts | 46 +++++++++++++++++++ > > > > > 2 files changed, 47 insertions(+) > > > > > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > > > > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile > > > > > index a5fb1eaa8acf..ec39fe856117 100644 > > > > > --- a/arch/arm64/boot/dts/allwinner/Makefile > > > > > +++ b/arch/arm64/boot/dts/allwinner/Makefile > > > > > @@ -2,6 +2,7 @@ > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb sun50i-a64-bananapi-m64-icn6211.dtb > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb > > > > > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5inmfd.dtb > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb > > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > > > > new file mode 100644 > > > > > index 000000000000..d73d1f55acb9 > > > > > --- /dev/null > > > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > > > > @@ -0,0 +1,46 @@ > > > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > > > +/* > > > > > + * Copyright (C) 2019 Oceanic Systems (UK) Ltd. > > > > > + * Copyright (C) 2019 Amarula Solutions B.V. > > > > > + * Author: Jagan Teki <jagan@amarulasolutions.com> > > > > > + */ > > > > > + > > > > > +/dts-v1/; > > > > > + > > > > > +#include "sun50i-a64-sopine.dtsi" > > > > > + > > > > > +/ { > > > > > + model = "Oceanic A64-5inMFD"; > > > > > + compatible = "oceanic,a64-5inmfd", "allwinner,sun50i-a64"; > > > > > > > > The name of the DT is Oceanic 5inMFD, while you call the board > > > > A64-5inMFD here, which name is the actual name? > > > > > > Yes, this is something that we discussed during "Amarula A64-Relic" > > > naming convention. > > > > > > Since these boards are not famous like teres-i we agreed to add vendor > > > name after sun50i-a64- followed by real board name. > > > > > > Here A64 already covered during sun50i-a64- so the dts name simply the > > > <vendor_name>-<real_board_name> > > > > For the DT name, yeah, we want that pattern. > > > > For the compatible and model, we want to use the model name. > > Entire model name after <vendor_name>, ? > > model = "Oceanic A64-5inMFD"; > compatible = "oceanic,a64-5inmfd", "allwinner,sun50i-a64"; > > is this not sufficient? > > Let me understand with respective few existing stuff. > > model = "Amarula A64-Relic"; > compatible = "amarula,a64-relic", "allwinner,sun50i-a64"; > > model = "Olimex A64 Teres-I" > compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64"; This one is called the TERES-A64: https://www.olimex.com/Products/DIY-Laptop/KITS/TERES-A64-WHITE/open-source-hardware The laptop is the Teres-I, it can have an A64 > model = "FriendlyARM NanoPi A64"; > compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64"; NanoPi A64 is the name of the board: http://nanopi.io/nanopi-a64.html > model = "Olimex A64-Olinuxino"; > compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64" A64-Olinuxino is the name of the board too: https://www.olimex.com/Products/OLinuXino/A64/A64-OLinuXino/open-source-hardware > Would you comment, what is the different with respect to my change? If the name of the product is 5inMFD, then the model should be Oceanic 5inMFD, and its compatible oceanic,5inmfd Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support 2019-03-05 15:59 ` Maxime Ripard @ 2019-03-05 16:07 ` Jagan Teki 2019-03-05 16:35 ` Ryan Pannell 0 siblings, 1 reply; 12+ messages in thread From: Jagan Teki @ 2019-03-05 16:07 UTC (permalink / raw) To: Maxime Ripard Cc: Mark Rutland, devicetree, Ryan Pannell, linux-kernel, Chen-Yu Tsai, Rob Herring, Michael Trimarchi, linux-amarula, linux-arm-kernel On Tue, Mar 5, 2019 at 9:29 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > On Fri, Mar 01, 2019 at 10:27:14PM +0530, Jagan Teki wrote: > > On Fri, Mar 1, 2019 at 8:27 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > > > On Wed, Feb 27, 2019 at 09:49:23PM +0530, Jagan Teki wrote: > > > > On Wed, Feb 27, 2019 at 9:03 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > > > > > > > Hi, > > > > > > > > > > On Tue, Feb 26, 2019 at 11:32:40AM +0530, Jagan Teki wrote: > > > > > > Oceanic A64-5inMFD is a 5 inch Multi function display baseboard > > > > > > designed to mount SoPine SOM. > > > > > > > > > > > > Key features: > > > > > > - Allwinner A64 Cortex-A53 > > > > > > - Mali-400MP2 GPU > > > > > > - AXP803 PMIC > > > > > > - 2GB DDR3 RAM > > > > > > - SD Slot > > > > > > - SPI-NOR flash > > > > > > - EMAC, RTL8211E > > > > > > - MCP2515 CAN > > > > > > - MIPI-DSI > > > > > > - Goodix 911 CTP > > > > > > - USB Host > > > > > > - 12V DC power supply > > > > > > > > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > > > --- > > > > > > arch/arm64/boot/dts/allwinner/Makefile | 1 + > > > > > > .../allwinner/sun50i-a64-oceanic-5inmfd.dts | 46 +++++++++++++++++++ > > > > > > 2 files changed, 47 insertions(+) > > > > > > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > > > > > > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile > > > > > > index a5fb1eaa8acf..ec39fe856117 100644 > > > > > > --- a/arch/arm64/boot/dts/allwinner/Makefile > > > > > > +++ b/arch/arm64/boot/dts/allwinner/Makefile > > > > > > @@ -2,6 +2,7 @@ > > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb > > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb sun50i-a64-bananapi-m64-icn6211.dtb > > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb > > > > > > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5inmfd.dtb > > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb > > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb > > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > > > > > new file mode 100644 > > > > > > index 000000000000..d73d1f55acb9 > > > > > > --- /dev/null > > > > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > > > > > @@ -0,0 +1,46 @@ > > > > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > > > > +/* > > > > > > + * Copyright (C) 2019 Oceanic Systems (UK) Ltd. > > > > > > + * Copyright (C) 2019 Amarula Solutions B.V. > > > > > > + * Author: Jagan Teki <jagan@amarulasolutions.com> > > > > > > + */ > > > > > > + > > > > > > +/dts-v1/; > > > > > > + > > > > > > +#include "sun50i-a64-sopine.dtsi" > > > > > > + > > > > > > +/ { > > > > > > + model = "Oceanic A64-5inMFD"; > > > > > > + compatible = "oceanic,a64-5inmfd", "allwinner,sun50i-a64"; > > > > > > > > > > The name of the DT is Oceanic 5inMFD, while you call the board > > > > > A64-5inMFD here, which name is the actual name? > > > > > > > > Yes, this is something that we discussed during "Amarula A64-Relic" > > > > naming convention. > > > > > > > > Since these boards are not famous like teres-i we agreed to add vendor > > > > name after sun50i-a64- followed by real board name. > > > > > > > > Here A64 already covered during sun50i-a64- so the dts name simply the > > > > <vendor_name>-<real_board_name> > > > > > > For the DT name, yeah, we want that pattern. > > > > > > For the compatible and model, we want to use the model name. > > > > Entire model name after <vendor_name>, ? > > > > model = "Oceanic A64-5inMFD"; > > compatible = "oceanic,a64-5inmfd", "allwinner,sun50i-a64"; > > > > is this not sufficient? > > > > Let me understand with respective few existing stuff. > > > > model = "Amarula A64-Relic"; > > compatible = "amarula,a64-relic", "allwinner,sun50i-a64"; > > > > model = "Olimex A64 Teres-I" > > compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64"; > > This one is called the TERES-A64: > https://www.olimex.com/Products/DIY-Laptop/KITS/TERES-A64-WHITE/open-source-hardware > > The laptop is the Teres-I, it can have an A64 > > > model = "FriendlyARM NanoPi A64"; > > compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64"; > > NanoPi A64 is the name of the board: http://nanopi.io/nanopi-a64.html > > > model = "Olimex A64-Olinuxino"; > > compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64" > > A64-Olinuxino is the name of the board too: > https://www.olimex.com/Products/OLinuXino/A64/A64-OLinuXino/open-source-hardware > > > Would you comment, what is the different with respect to my change? > > If the name of the product is 5inMFD, then the model should be Oceanic > 5inMFD, and its compatible oceanic,5inmfd Oceanic seems to have some multiple Multi Function Devices, ie reason we prefer the product as 'A64-5inMFD' since it is A64 based. In this case the model and compatible should be fine I think? _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support 2019-03-05 16:07 ` Jagan Teki @ 2019-03-05 16:35 ` Ryan Pannell 2019-03-06 9:27 ` Maxime Ripard 0 siblings, 1 reply; 12+ messages in thread From: Ryan Pannell @ 2019-03-05 16:35 UTC (permalink / raw) To: Jagan Teki, Maxime Ripard Cc: Mark Rutland, devicetree, linux-kernel, Chen-Yu Tsai, Rob Herring, Michael Trimarchi, linux-amarula, linux-arm-kernel We don't mind if it has to be: compatible = "oceanic,5inmfd", "allwinner,sun50i-a64"; However, to avoid confusion, might it be worth including the part number (We list this as '5205 5" MFD') so this would become: compatible = "oceanic,5205-5inmfd", "allwinner,sun50i-a64"; Perhaps this solves the issue. Please let me know thoughts. Ryan Pannell Development Team Lead Oceanic Systems (UK) Ltd -----Original Message----- From: Jagan Teki <jagan@amarulasolutions.com> Sent: 05 March 2019 16:08 To: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org>; Rob Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Ryan Pannell <ryan@osukl.com>; Michael Trimarchi <michael@amarulasolutions.com>; linux-arm-kernel <linux-arm-kernel@lists.infradead.org>; devicetree <devicetree@vger.kernel.org>; linux-kernel <linux-kernel@vger.kernel.org>; linux-amarula@amarulasolutions.com Subject: Re: [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support On Tue, Mar 5, 2019 at 9:29 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > On Fri, Mar 01, 2019 at 10:27:14PM +0530, Jagan Teki wrote: > > On Fri, Mar 1, 2019 at 8:27 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > > > On Wed, Feb 27, 2019 at 09:49:23PM +0530, Jagan Teki wrote: > > > > On Wed, Feb 27, 2019 at 9:03 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > > > > > > > Hi, > > > > > > > > > > On Tue, Feb 26, 2019 at 11:32:40AM +0530, Jagan Teki wrote: > > > > > > Oceanic A64-5inMFD is a 5 inch Multi function display > > > > > > baseboard designed to mount SoPine SOM. > > > > > > > > > > > > Key features: > > > > > > - Allwinner A64 Cortex-A53 > > > > > > - Mali-400MP2 GPU > > > > > > - AXP803 PMIC > > > > > > - 2GB DDR3 RAM > > > > > > - SD Slot > > > > > > - SPI-NOR flash > > > > > > - EMAC, RTL8211E > > > > > > - MCP2515 CAN > > > > > > - MIPI-DSI > > > > > > - Goodix 911 CTP > > > > > > - USB Host > > > > > > - 12V DC power supply > > > > > > > > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > > > --- > > > > > > arch/arm64/boot/dts/allwinner/Makefile | 1 + > > > > > > .../allwinner/sun50i-a64-oceanic-5inmfd.dts | 46 +++++++++++++++++++ > > > > > > 2 files changed, 47 insertions(+) create mode 100644 > > > > > > arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dts > > > > > > > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/Makefile > > > > > > b/arch/arm64/boot/dts/allwinner/Makefile > > > > > > index a5fb1eaa8acf..ec39fe856117 100644 > > > > > > --- a/arch/arm64/boot/dts/allwinner/Makefile > > > > > > +++ b/arch/arm64/boot/dts/allwinner/Makefile > > > > > > @@ -2,6 +2,7 @@ > > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb > > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb > > > > > > sun50i-a64-bananapi-m64-icn6211.dtb > > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb > > > > > > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5inmfd.dtb > > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb > > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb > > > > > > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb diff > > > > > > --git > > > > > > a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dt > > > > > > s > > > > > > b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmfd.dt > > > > > > s > > > > > > new file mode 100644 > > > > > > index 000000000000..d73d1f55acb9 > > > > > > --- /dev/null > > > > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5inmf > > > > > > +++ d.dts > > > > > > @@ -0,0 +1,46 @@ > > > > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > > > > +/* > > > > > > + * Copyright (C) 2019 Oceanic Systems (UK) Ltd. > > > > > > + * Copyright (C) 2019 Amarula Solutions B.V. > > > > > > + * Author: Jagan Teki <jagan@amarulasolutions.com> */ > > > > > > + > > > > > > +/dts-v1/; > > > > > > + > > > > > > +#include "sun50i-a64-sopine.dtsi" > > > > > > + > > > > > > +/ { > > > > > > + model = "Oceanic A64-5inMFD"; > > > > > > + compatible = "oceanic,a64-5inmfd", > > > > > > +"allwinner,sun50i-a64"; > > > > > > > > > > The name of the DT is Oceanic 5inMFD, while you call the board > > > > > A64-5inMFD here, which name is the actual name? > > > > > > > > Yes, this is something that we discussed during "Amarula A64-Relic" > > > > naming convention. > > > > > > > > Since these boards are not famous like teres-i we agreed to add > > > > vendor name after sun50i-a64- followed by real board name. > > > > > > > > Here A64 already covered during sun50i-a64- so the dts name > > > > simply the <vendor_name>-<real_board_name> > > > > > > For the DT name, yeah, we want that pattern. > > > > > > For the compatible and model, we want to use the model name. > > > > Entire model name after <vendor_name>, ? > > > > model = "Oceanic A64-5inMFD"; > > compatible = "oceanic,a64-5inmfd", "allwinner,sun50i-a64"; > > > > is this not sufficient? > > > > Let me understand with respective few existing stuff. > > > > model = "Amarula A64-Relic"; > > compatible = "amarula,a64-relic", "allwinner,sun50i-a64"; > > > > model = "Olimex A64 Teres-I" > > compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64"; > > This one is called the TERES-A64: > https://www.olimex.com/Products/DIY-Laptop/KITS/TERES-A64-WHITE/open-s > ource-hardware > > The laptop is the Teres-I, it can have an A64 > > > model = "FriendlyARM NanoPi A64"; > > compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64"; > > NanoPi A64 is the name of the board: http://nanopi.io/nanopi-a64.html > > > model = "Olimex A64-Olinuxino"; > > compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64" > > A64-Olinuxino is the name of the board too: > https://www.olimex.com/Products/OLinuXino/A64/A64-OLinuXino/open-sourc > e-hardware > > > Would you comment, what is the different with respect to my change? > > If the name of the product is 5inMFD, then the model should be Oceanic > 5inMFD, and its compatible oceanic,5inmfd Oceanic seems to have some multiple Multi Function Devices, ie reason we prefer the product as 'A64-5inMFD' since it is A64 based. In this case the model and compatible should be fine I think? _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support 2019-03-05 16:35 ` Ryan Pannell @ 2019-03-06 9:27 ` Maxime Ripard 2019-03-06 9:36 ` Jagan Teki 0 siblings, 1 reply; 12+ messages in thread From: Maxime Ripard @ 2019-03-06 9:27 UTC (permalink / raw) To: Ryan Pannell Cc: Mark Rutland, devicetree, linux-kernel, Chen-Yu Tsai, Rob Herring, Jagan Teki, Michael Trimarchi, linux-amarula, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 546 bytes --] On Tue, Mar 05, 2019 at 04:35:04PM +0000, Ryan Pannell wrote: > We don't mind if it has to be: > compatible = "oceanic,5inmfd", "allwinner,sun50i-a64"; > > However, to avoid confusion, might it be worth including the part number (We list this as '5205 5" MFD') so this would become: > compatible = "oceanic,5205-5inmfd", "allwinner,sun50i-a64"; > > Perhaps this solves the issue. Please let me know thoughts. Yep, that works for me Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support 2019-03-06 9:27 ` Maxime Ripard @ 2019-03-06 9:36 ` Jagan Teki 2019-03-06 10:18 ` Ryan Pannell 0 siblings, 1 reply; 12+ messages in thread From: Jagan Teki @ 2019-03-06 9:36 UTC (permalink / raw) To: Maxime Ripard Cc: Mark Rutland, devicetree, Ryan Pannell, linux-kernel, Chen-Yu Tsai, Rob Herring, Michael Trimarchi, linux-amarula, linux-arm-kernel On Wed, Mar 6, 2019 at 2:57 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > On Tue, Mar 05, 2019 at 04:35:04PM +0000, Ryan Pannell wrote: > > We don't mind if it has to be: > > compatible = "oceanic,5inmfd", "allwinner,sun50i-a64"; > > > > However, to avoid confusion, might it be worth including the part number (We list this as '5205 5" MFD') so this would become: > > compatible = "oceanic,5205-5inmfd", "allwinner,sun50i-a64"; > > > > Perhaps this solves the issue. Please let me know thoughts. > > Yep, that works for me A64 instead of part-number 5205 seems less confused isn't it? or we need to give more priority with real hardware definition? _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support 2019-03-06 9:36 ` Jagan Teki @ 2019-03-06 10:18 ` Ryan Pannell 0 siblings, 0 replies; 12+ messages in thread From: Ryan Pannell @ 2019-03-06 10:18 UTC (permalink / raw) To: Jagan Teki, Maxime Ripard Cc: Mark Rutland, devicetree, linux-kernel, Chen-Yu Tsai, Rob Herring, Michael Trimarchi, linux-amarula, linux-arm-kernel Jagan, The compatible is for the real hardware name as Maxime previously explained. The platform is described in the latter part. Please use: compatible = "oceanic,5205-5inmfd", "allwinner,sun50i-a64"; Thanks, Ryan Pannell Development Team Lead Oceanic Systems (UK) Ltd -----Original Message----- From: Jagan Teki <jagan@amarulasolutions.com> Sent: 06 March 2019 09:36 To: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Ryan Pannell <ryan@osukl.com>; Chen-Yu Tsai <wens@csie.org>; Rob Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Michael Trimarchi <michael@amarulasolutions.com>; linux-arm-kernel <linux-arm-kernel@lists.infradead.org>; devicetree <devicetree@vger.kernel.org>; linux-kernel <linux-kernel@vger.kernel.org>; linux-amarula@amarulasolutions.com Subject: Re: [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support On Wed, Mar 6, 2019 at 2:57 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > On Tue, Mar 05, 2019 at 04:35:04PM +0000, Ryan Pannell wrote: > > We don't mind if it has to be: > > compatible = "oceanic,5inmfd", "allwinner,sun50i-a64"; > > > > However, to avoid confusion, might it be worth including the part number (We list this as '5205 5" MFD') so this would become: > > compatible = "oceanic,5205-5inmfd", "allwinner,sun50i-a64"; > > > > Perhaps this solves the issue. Please let me know thoughts. > > Yep, that works for me A64 instead of part-number 5205 seems less confused isn't it? or we need to give more priority with real hardware definition? _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2019-03-06 10:18 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-02-26 6:02 [PATCH 1/2] dt-bindings: Add vendor prefix for oceanic Jagan Teki 2019-02-26 6:02 ` [PATCH 2/2] arm64: allwinner: a64: Add Oceanic A64-5inMFD initial support Jagan Teki 2019-02-27 15:33 ` Maxime Ripard 2019-02-27 16:19 ` Jagan Teki 2019-03-01 14:57 ` Maxime Ripard 2019-03-01 16:57 ` Jagan Teki 2019-03-05 15:59 ` Maxime Ripard 2019-03-05 16:07 ` Jagan Teki 2019-03-05 16:35 ` Ryan Pannell 2019-03-06 9:27 ` Maxime Ripard 2019-03-06 9:36 ` Jagan Teki 2019-03-06 10:18 ` Ryan Pannell
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).