RE: [PATCH 04/10] remoteproc: imx_rproc: make syscon optional

[Peng Fan <peng.fan@nxp.com>]

> Subject: Re: [PATCH 04/10] remoteproc: imx_rproc: make syscon optional
> 
> On Wed, Aug 19, 2020 at 12:51:27AM +0000, Peng Fan wrote:
> > > Subject: Re: [PATCH 04/10] remoteproc: imx_rproc: make syscon
> > > optional
> > >
> > > Hi Peng,
> > >
> > > On Fri, Jul 24, 2020 at 04:08:07PM +0800, Peng Fan wrote:
> > > > Make syscon optional, since i.MX8QM/QXP/7ULP not have SRC to
> > > > control
> > > M4.
> > > > But currently i.MX8QM/QXP/7ULP not added, so still check regmap
> > > > when start/stop to avoid unhappy things.
> > >
> > > On the i.MX8QM/QXP/7ULP processors, the remote processors are not
> > > handled by the remoteproc cores, as implemented in this patch.  In
> > > such a scenario how does the remoteproc core know the remote
> > > processor has crashed and how does it recover from such a condition?
> >
> > For 7ULP dual boot case, A7 is under control of M4, so if m4 crash, I
> > suppose
> > A7 would not work properly.
> 
> In that case I assume the whole system gets rebooted, which puts the A7 in a
> state where it can "attach" with the M4 again.

Yes. Whole system get rebooted.

> 
> >
> > For 8QM/QXP partition case, M4 is in a standalone partition, if M4
> > crash or reboot, the system controller unit will restart M4 and notify
> > Acore that M4 restart.
> 
> And how does that notification work exactly?  Does rproc_report_crash() get
> called somewhere in that process in order for the remoteproc core to attach
> to the M4 again?

Yes. We registered a interrupt notification handler with system controller unit.
When M4 rebooted, the system controller will raise interrupt to A53 core.
Then the notification callback will be invoked, the callback will call
rproc_report_crash. I not included this part code in the patchset, since
this patchset is to add initial support for 8M case.

Thanks,
Peng.

> 
> Many thanks for the help,
> Mathieu
> 
> >
> > Thanks,
> > Peng.
> >
> > >
> > > Thanks,
> > > Mathieu
> > >
> > > >
> > > > Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
> > > > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > > > ---
> > > >  drivers/remoteproc/imx_rproc.c | 11 +++++++++--
> > > >  1 file changed, 9 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/remoteproc/imx_rproc.c
> > > > b/drivers/remoteproc/imx_rproc.c index 82594a800a1b..4fad5c0b1c05
> > > > 100644
> > > > --- a/drivers/remoteproc/imx_rproc.c
> > > > +++ b/drivers/remoteproc/imx_rproc.c
> > > > @@ -162,6 +162,9 @@ static int imx_rproc_start(struct rproc *rproc)
> > > >  	struct device *dev = priv->dev;
> > > >  	int ret;
> > > >
> > > > +	if (!priv->regmap)
> > > > +		return -EOPNOTSUPP;
> > > > +
> > > >  	ret = regmap_update_bits(priv->regmap, dcfg->src_reg,
> > > >  				 dcfg->src_mask, dcfg->src_start);
> > > >  	if (ret)
> > > > @@ -177,6 +180,9 @@ static int imx_rproc_stop(struct rproc *rproc)
> > > >  	struct device *dev = priv->dev;
> > > >  	int ret;
> > > >
> > > > +	if (!priv->regmap)
> > > > +		return -EOPNOTSUPP;
> > > > +
> > > >  	ret = regmap_update_bits(priv->regmap, dcfg->src_reg,
> > > >  				 dcfg->src_mask, dcfg->src_stop);
> > > >  	if (ret)
> > > > @@ -325,9 +331,10 @@ static int imx_rproc_probe(struct
> > > > platform_device
> > > *pdev)
> > > >  	regmap = syscon_regmap_lookup_by_phandle(np, "syscon");
> > > >  	if (IS_ERR(regmap)) {
> > > >  		dev_err(dev, "failed to find syscon\n");
> > > > -		return PTR_ERR(regmap);
> > > > +		regmap = NULL;
> > > > +	} else {
> > > > +		regmap_attach_dev(dev, regmap, &config);
> > > >  	}
> > > > -	regmap_attach_dev(dev, regmap, &config);
> > > >
> > > >  	/* set some other name then imx */
> > > >  	rproc = rproc_alloc(dev, "imx-rproc", &imx_rproc_ops,
> > > > --
> > > > 2.16.4
> > > >

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel