[PATCH v1 2/3] scsi: ufs: Optimize host lock on transfer requests send/compl paths

[PATCH v1 2/3] scsi: ufs: Optimize host lock on transfer requests send/compl paths

[Can Guo]

Current UFS IRQ handler is completely wrapped by host lock, and because
ufshcd_send_command() is also protected by host lock, when IRQ handler
fires, not only the CPU running the IRQ handler cannot send new requests,
the rest CPUs can neither. Move the host lock wrapping the IRQ handler into
specific branches, i.e., ufshcd_uic_cmd_compl(), ufshcd_check_errors(),
ufshcd_tmc_handler() and ufshcd_transfer_req_compl(). Meanwhile, to further
reduce occpuation of host lock in ufshcd_transfer_req_compl(), host lock is
no longer required to call __ufshcd_transfer_req_compl(). As per test, the
optimization can bring considerable gain to random read/write performance.

Cc: Stanley Chu <stanley.chu@mediatek.com>
Co-developed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 258 ++++++++++++++++++++++------------------------
 drivers/scsi/ufs/ufshcd.h |   2 -
 2 files changed, 126 insertions(+), 134 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index c4b37d2..b9b5e61 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -758,7 +758,7 @@ static inline void ufshcd_utmrl_clear(struct ufs_hba *hba, u32 pos)
  */
 static inline void ufshcd_outstanding_req_clear(struct ufs_hba *hba, int tag)
 {
-	__clear_bit(tag, &hba->outstanding_reqs);
+	clear_bit(tag, &hba->outstanding_reqs);
 }
 
 /**
@@ -1984,15 +1984,19 @@ static void ufshcd_clk_scaling_start_busy(struct ufs_hba *hba)
 {
 	bool queue_resume_work = false;
 	ktime_t curr_t = ktime_get();
+	unsigned long flags;
 
 	if (!ufshcd_is_clkscaling_supported(hba))
 		return;
 
+	spin_lock_irqsave(hba->host->host_lock, flags);
 	if (!hba->clk_scaling.active_reqs++)
 		queue_resume_work = true;
 
-	if (!hba->clk_scaling.is_enabled || hba->pm_op_in_progress)
+	if (!hba->clk_scaling.is_enabled || hba->pm_op_in_progress) {
+		spin_unlock_irqrestore(hba->host->host_lock, flags);
 		return;
+	}
 
 	if (queue_resume_work)
 		queue_work(hba->clk_scaling.workq,
@@ -2008,21 +2012,26 @@ static void ufshcd_clk_scaling_start_busy(struct ufs_hba *hba)
 		hba->clk_scaling.busy_start_t = curr_t;
 		hba->clk_scaling.is_busy_started = true;
 	}
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
 }
 
 static void ufshcd_clk_scaling_update_busy(struct ufs_hba *hba)
 {
 	struct ufs_clk_scaling *scaling = &hba->clk_scaling;
+	unsigned long flags;
 
 	if (!ufshcd_is_clkscaling_supported(hba))
 		return;
 
+	spin_lock_irqsave(hba->host->host_lock, flags);
+	hba->clk_scaling.active_reqs--;
 	if (!hba->outstanding_reqs && scaling->is_busy_started) {
 		scaling->tot_busy_t += ktime_to_us(ktime_sub(ktime_get(),
 					scaling->busy_start_t));
 		scaling->busy_start_t = 0;
 		scaling->is_busy_started = false;
 	}
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
 }
 
 static inline int ufshcd_monitor_opcode2dir(u8 opcode)
@@ -2048,15 +2057,20 @@ static inline bool ufshcd_should_inform_monitor(struct ufs_hba *hba,
 static void ufshcd_start_monitor(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 {
 	int dir = ufshcd_monitor_opcode2dir(*lrbp->cmd->cmnd);
+	unsigned long flags;
 
+	spin_lock_irqsave(hba->host->host_lock, flags);
 	if (dir >= 0 && hba->monitor.nr_queued[dir]++ == 0)
 		hba->monitor.busy_start_ts[dir] = ktime_get();
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
 }
 
 static void ufshcd_update_monitor(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 {
 	int dir = ufshcd_monitor_opcode2dir(*lrbp->cmd->cmnd);
+	unsigned long flags;
 
+	spin_lock_irqsave(hba->host->host_lock, flags);
 	if (dir >= 0 && hba->monitor.nr_queued[dir] > 0) {
 		struct request *req = lrbp->cmd->request;
 		struct ufs_hba_monitor *m = &hba->monitor;
@@ -2080,6 +2094,7 @@ static void ufshcd_update_monitor(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 		/* Push forward the busy start of monitor */
 		m->busy_start_ts[dir] = now;
 	}
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
 }
 
 /**
@@ -2091,16 +2106,19 @@ static inline
 void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
 {
 	struct ufshcd_lrb *lrbp = &hba->lrb[task_tag];
+	unsigned long flags;
 
 	lrbp->issue_time_stamp = ktime_get();
 	lrbp->compl_time_stamp = ktime_set(0, 0);
 	ufshcd_vops_setup_xfer_req(hba, task_tag, (lrbp->cmd ? true : false));
 	ufshcd_add_command_trace(hba, task_tag, UFS_CMD_SEND);
 	ufshcd_clk_scaling_start_busy(hba);
-	__set_bit(task_tag, &hba->outstanding_reqs);
 	if (unlikely(ufshcd_should_inform_monitor(hba, lrbp)))
 		ufshcd_start_monitor(hba, lrbp);
+	spin_lock_irqsave(hba->host->host_lock, flags);
+	set_bit(task_tag, &hba->outstanding_reqs);
 	ufshcd_writel(hba, 1 << task_tag, REG_UTP_TRANSFER_REQ_DOOR_BELL);
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
 	/* Make sure that doorbell is committed immediately */
 	wmb();
 }
@@ -2671,7 +2689,6 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 {
 	struct ufshcd_lrb *lrbp;
 	struct ufs_hba *hba;
-	unsigned long flags;
 	int tag;
 	int err = 0;
 
@@ -2688,6 +2705,43 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	if (!down_read_trylock(&hba->clk_scaling_lock))
 		return SCSI_MLQUEUE_HOST_BUSY;
 
+	switch (hba->ufshcd_state) {
+	case UFSHCD_STATE_OPERATIONAL:
+	case UFSHCD_STATE_EH_SCHEDULED_NON_FATAL:
+		break;
+	case UFSHCD_STATE_EH_SCHEDULED_FATAL:
+		/*
+		 * pm_runtime_get_sync() is used at error handling preparation
+		 * stage. If a scsi cmd, e.g. the SSU cmd, is sent from hba's
+		 * PM ops, it can never be finished if we let SCSI layer keep
+		 * retrying it, which gets err handler stuck forever. Neither
+		 * can we let the scsi cmd pass through, because UFS is in bad
+		 * state, the scsi cmd may eventually time out, which will get
+		 * err handler blocked for too long. So, just fail the scsi cmd
+		 * sent from PM ops, err handler can recover PM error anyways.
+		 */
+		if (hba->pm_op_in_progress) {
+			hba->force_reset = true;
+			set_host_byte(cmd, DID_BAD_TARGET);
+			cmd->scsi_done(cmd);
+			goto out;
+		}
+		fallthrough;
+	case UFSHCD_STATE_RESET:
+		err = SCSI_MLQUEUE_HOST_BUSY;
+		goto out;
+	case UFSHCD_STATE_ERROR:
+		set_host_byte(cmd, DID_ERROR);
+		cmd->scsi_done(cmd);
+		goto out;
+	default:
+		dev_WARN_ONCE(hba->dev, 1, "%s: invalid state %d\n",
+				__func__, hba->ufshcd_state);
+		set_host_byte(cmd, DID_BAD_TARGET);
+		cmd->scsi_done(cmd);
+		goto out;
+	}
+
 	hba->req_abort_count = 0;
 
 	err = ufshcd_hold(hba, true);
@@ -2698,8 +2752,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	WARN_ON(ufshcd_is_clkgating_allowed(hba) &&
 		(hba->clk_gating.state != CLKS_ON));
 
-	lrbp = &hba->lrb[tag];
-	if (unlikely(lrbp->in_use)) {
+	if (unlikely(test_bit(tag, &hba->outstanding_reqs))) {
 		if (hba->pm_op_in_progress)
 			set_host_byte(cmd, DID_BAD_TARGET);
 		else
@@ -2708,6 +2761,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 		goto out;
 	}
 
+	lrbp = &hba->lrb[tag];
 	WARN_ON(lrbp->cmd);
 	lrbp->cmd = cmd;
 	lrbp->sense_bufflen = UFS_SENSE_SIZE;
@@ -2731,51 +2785,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	/* Make sure descriptors are ready before ringing the doorbell */
 	wmb();
 
-	spin_lock_irqsave(hba->host->host_lock, flags);
-	switch (hba->ufshcd_state) {
-	case UFSHCD_STATE_OPERATIONAL:
-	case UFSHCD_STATE_EH_SCHEDULED_NON_FATAL:
-		break;
-	case UFSHCD_STATE_EH_SCHEDULED_FATAL:
-		/*
-		 * pm_runtime_get_sync() is used at error handling preparation
-		 * stage. If a scsi cmd, e.g. the SSU cmd, is sent from hba's
-		 * PM ops, it can never be finished if we let SCSI layer keep
-		 * retrying it, which gets err handler stuck forever. Neither
-		 * can we let the scsi cmd pass through, because UFS is in bad
-		 * state, the scsi cmd may eventually time out, which will get
-		 * err handler blocked for too long. So, just fail the scsi cmd
-		 * sent from PM ops, err handler can recover PM error anyways.
-		 */
-		if (hba->pm_op_in_progress) {
-			hba->force_reset = true;
-			set_host_byte(cmd, DID_BAD_TARGET);
-			goto out_compl_cmd;
-		}
-		fallthrough;
-	case UFSHCD_STATE_RESET:
-		err = SCSI_MLQUEUE_HOST_BUSY;
-		goto out_compl_cmd;
-	case UFSHCD_STATE_ERROR:
-		set_host_byte(cmd, DID_ERROR);
-		goto out_compl_cmd;
-	default:
-		dev_WARN_ONCE(hba->dev, 1, "%s: invalid state %d\n",
-				__func__, hba->ufshcd_state);
-		set_host_byte(cmd, DID_BAD_TARGET);
-		goto out_compl_cmd;
-	}
 	ufshcd_send_command(hba, tag);
-	spin_unlock_irqrestore(hba->host->host_lock, flags);
-	goto out;
-
-out_compl_cmd:
-	scsi_dma_unmap(lrbp->cmd);
-	lrbp->cmd = NULL;
-	spin_unlock_irqrestore(hba->host->host_lock, flags);
-	ufshcd_release(hba);
-	if (!err)
-		cmd->scsi_done(cmd);
 out:
 	up_read(&hba->clk_scaling_lock);
 	return err;
@@ -2930,7 +2940,6 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
 	int err;
 	int tag;
 	struct completion wait;
-	unsigned long flags;
 
 	down_read(&hba->clk_scaling_lock);
 
@@ -2947,13 +2956,13 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
 	tag = req->tag;
 	WARN_ON_ONCE(!ufshcd_valid_tag(hba, tag));
 
-	init_completion(&wait);
-	lrbp = &hba->lrb[tag];
-	if (unlikely(lrbp->in_use)) {
+	if (unlikely(test_bit(tag, &hba->outstanding_reqs))) {
 		err = -EBUSY;
 		goto out;
 	}
 
+	init_completion(&wait);
+	lrbp = &hba->lrb[tag];
 	WARN_ON(lrbp->cmd);
 	err = ufshcd_compose_dev_cmd(hba, lrbp, cmd_type, tag);
 	if (unlikely(err))
@@ -2964,12 +2973,9 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
 	ufshcd_add_query_upiu_trace(hba, UFS_QUERY_SEND, lrbp->ucd_req_ptr);
 	/* Make sure descriptors are ready before ringing the doorbell */
 	wmb();
-	spin_lock_irqsave(hba->host->host_lock, flags);
-	ufshcd_send_command(hba, tag);
-	spin_unlock_irqrestore(hba->host->host_lock, flags);
 
+	ufshcd_send_command(hba, tag);
 	err = ufshcd_wait_for_dev_cmd(hba, lrbp, timeout);
-
 out:
 	ufshcd_add_query_upiu_trace(hba, err ? UFS_QUERY_ERR : UFS_QUERY_COMP,
 				    (struct utp_upiu_req *)lrbp->ucd_rsp_ptr);
@@ -5147,6 +5153,24 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 	return result;
 }
 
+static bool ufshcd_is_auto_hibern8_error(struct ufs_hba *hba,
+					 u32 intr_mask)
+{
+	if (!ufshcd_is_auto_hibern8_supported(hba) ||
+	    !ufshcd_is_auto_hibern8_enabled(hba))
+		return false;
+
+	if (!(intr_mask & UFSHCD_UIC_HIBERN8_MASK))
+		return false;
+
+	if (hba->active_uic_cmd &&
+	    (hba->active_uic_cmd->command == UIC_CMD_DME_HIBER_ENTER ||
+	    hba->active_uic_cmd->command == UIC_CMD_DME_HIBER_EXIT))
+		return false;
+
+	return true;
+}
+
 /**
  * ufshcd_uic_cmd_compl - handle completion of uic command
  * @hba: per adapter instance
@@ -5160,6 +5184,10 @@ static irqreturn_t ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)
 {
 	irqreturn_t retval = IRQ_NONE;
 
+	spin_lock(hba->host->host_lock);
+	if (ufshcd_is_auto_hibern8_error(hba, intr_status))
+		hba->errors |= (UFSHCD_UIC_HIBERN8_MASK & intr_status);
+
 	if ((intr_status & UIC_COMMAND_COMPL) && hba->active_uic_cmd) {
 		hba->active_uic_cmd->argument2 |=
 			ufshcd_get_uic_cmd_result(hba);
@@ -5180,6 +5208,7 @@ static irqreturn_t ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)
 	if (retval == IRQ_HANDLED)
 		ufshcd_add_uic_command_trace(hba, hba->active_uic_cmd,
 					     UFS_CMD_COMP);
+	spin_unlock(hba->host->host_lock);
 	return retval;
 }
 
@@ -5198,8 +5227,9 @@ static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
 	bool update_scaling = false;
 
 	for_each_set_bit(index, &completed_reqs, hba->nutrs) {
+		if (!test_and_clear_bit(index, &hba->outstanding_reqs))
+			continue;
 		lrbp = &hba->lrb[index];
-		lrbp->in_use = false;
 		lrbp->compl_time_stamp = ktime_get();
 		cmd = lrbp->cmd;
 		if (cmd) {
@@ -5213,7 +5243,7 @@ static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
 			lrbp->cmd = NULL;
 			/* Do not touch lrbp after scsi done */
 			cmd->scsi_done(cmd);
-			__ufshcd_release(hba);
+			ufshcd_release(hba);
 			update_scaling = true;
 		} else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE ||
 			lrbp->command_type == UTP_CMD_TYPE_UFS_STORAGE) {
@@ -5224,14 +5254,9 @@ static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
 				update_scaling = true;
 			}
 		}
-		if (ufshcd_is_clkscaling_supported(hba) && update_scaling)
-			hba->clk_scaling.active_reqs--;
+		if (update_scaling)
+			ufshcd_clk_scaling_update_busy(hba);
 	}
-
-	/* clear corresponding bits of completed commands */
-	hba->outstanding_reqs ^= completed_reqs;
-
-	ufshcd_clk_scaling_update_busy(hba);
 }
 
 /**
@@ -5244,7 +5269,7 @@ static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
  */
 static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba)
 {
-	unsigned long completed_reqs;
+	unsigned long completed_reqs, flags;
 	u32 tr_doorbell;
 
 	/* Resetting interrupt aggregation counters first and reading the
@@ -5258,8 +5283,10 @@ static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba)
 	    !(hba->quirks & UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR))
 		ufshcd_reset_intr_aggr(hba);
 
+	spin_lock_irqsave(hba->host->host_lock, flags);
 	tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
 	completed_reqs = tr_doorbell ^ hba->outstanding_reqs;
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
 
 	if (completed_reqs) {
 		__ufshcd_transfer_req_compl(hba, completed_reqs);
@@ -5996,13 +6023,11 @@ static void ufshcd_err_handler(struct work_struct *work)
 	ufshcd_set_eh_in_progress(hba);
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
 	ufshcd_err_handling_prepare(hba);
+	/* Complete requests that have door-bell cleared by h/w */
+	ufshcd_complete_requests(hba);
 	spin_lock_irqsave(hba->host->host_lock, flags);
 	if (hba->ufshcd_state != UFSHCD_STATE_ERROR)
 		hba->ufshcd_state = UFSHCD_STATE_RESET;
-
-	/* Complete requests that have door-bell cleared by h/w */
-	ufshcd_complete_requests(hba);
-
 	/*
 	 * A full reset and restore might have happened after preparation
 	 * is finished, double check whether we should stop.
@@ -6085,12 +6110,11 @@ static void ufshcd_err_handler(struct work_struct *work)
 	}
 
 lock_skip_pending_xfer_clear:
-	spin_lock_irqsave(hba->host->host_lock, flags);
-
 	/* Complete the requests that are cleared by s/w */
 	ufshcd_complete_requests(hba);
-	hba->silence_err_logs = false;
 
+	spin_lock_irqsave(hba->host->host_lock, flags);
+	hba->silence_err_logs = false;
 	if (err_xfer || err_tm) {
 		needs_reset = true;
 		goto do_reset;
@@ -6240,37 +6264,23 @@ static irqreturn_t ufshcd_update_uic_error(struct ufs_hba *hba)
 	return retval;
 }
 
-static bool ufshcd_is_auto_hibern8_error(struct ufs_hba *hba,
-					 u32 intr_mask)
-{
-	if (!ufshcd_is_auto_hibern8_supported(hba) ||
-	    !ufshcd_is_auto_hibern8_enabled(hba))
-		return false;
-
-	if (!(intr_mask & UFSHCD_UIC_HIBERN8_MASK))
-		return false;
-
-	if (hba->active_uic_cmd &&
-	    (hba->active_uic_cmd->command == UIC_CMD_DME_HIBER_ENTER ||
-	    hba->active_uic_cmd->command == UIC_CMD_DME_HIBER_EXIT))
-		return false;
-
-	return true;
-}
-
 /**
  * ufshcd_check_errors - Check for errors that need s/w attention
  * @hba: per-adapter instance
+ * @intr_status: interrupt status generated by the controller
  *
  * Returns
  *  IRQ_HANDLED - If interrupt is valid
  *  IRQ_NONE    - If invalid interrupt
  */
-static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba)
+static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba, u32 intr_status)
 {
 	bool queue_eh_work = false;
 	irqreturn_t retval = IRQ_NONE;
 
+	spin_lock(hba->host->host_lock);
+	hba->errors |= UFSHCD_ERROR_MASK & intr_status;
+
 	if (hba->errors & INT_FATAL_ERRORS) {
 		ufshcd_update_evt_hist(hba, UFS_EVT_FATAL_ERR,
 				       hba->errors);
@@ -6325,6 +6335,9 @@ static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba)
 	 * itself without s/w intervention or errors that will be
 	 * handled by the SCSI core layer.
 	 */
+	hba->errors = 0;
+	hba->uic_error = 0;
+	spin_unlock(hba->host->host_lock);
 	return retval;
 }
 
@@ -6359,13 +6372,17 @@ static bool ufshcd_compl_tm(struct request *req, void *priv, bool reserved)
  */
 static irqreturn_t ufshcd_tmc_handler(struct ufs_hba *hba)
 {
+	unsigned long flags;
 	struct request_queue *q = hba->tmf_queue;
 	struct ctm_info ci = {
 		.hba	 = hba,
-		.pending = ufshcd_readl(hba, REG_UTP_TASK_REQ_DOOR_BELL),
 	};
 
+	spin_lock_irqsave(hba->host->host_lock, flags);
+	ci.pending = ufshcd_readl(hba, REG_UTP_TASK_REQ_DOOR_BELL);
 	blk_mq_tagset_busy_iter(q->tag_set, ufshcd_compl_tm, &ci);
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
+
 	return ci.ncpl ? IRQ_HANDLED : IRQ_NONE;
 }
 
@@ -6382,17 +6399,12 @@ static irqreturn_t ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
 {
 	irqreturn_t retval = IRQ_NONE;
 
-	hba->errors = UFSHCD_ERROR_MASK & intr_status;
-
-	if (ufshcd_is_auto_hibern8_error(hba, intr_status))
-		hba->errors |= (UFSHCD_UIC_HIBERN8_MASK & intr_status);
-
-	if (hba->errors)
-		retval |= ufshcd_check_errors(hba);
-
 	if (intr_status & UFSHCD_UIC_MASK)
 		retval |= ufshcd_uic_cmd_compl(hba, intr_status);
 
+	if (intr_status & UFSHCD_ERROR_MASK || hba->errors)
+		retval |= ufshcd_check_errors(hba, intr_status);
+
 	if (intr_status & UTP_TASK_REQ_COMPL)
 		retval |= ufshcd_tmc_handler(hba);
 
@@ -6418,7 +6430,6 @@ static irqreturn_t ufshcd_intr(int irq, void *__hba)
 	struct ufs_hba *hba = __hba;
 	int retries = hba->nutrs;
 
-	spin_lock(hba->host->host_lock);
 	intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS);
 	hba->ufs_stats.last_intr_status = intr_status;
 	hba->ufs_stats.last_intr_ts = ktime_get();
@@ -6449,7 +6460,6 @@ static irqreturn_t ufshcd_intr(int irq, void *__hba)
 		ufshcd_dump_regs(hba, 0, UFSHCI_REG_SPACE_SIZE, "host_regs: ");
 	}
 
-	spin_unlock(hba->host->host_lock);
 	return retval;
 }
 
@@ -6626,7 +6636,6 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba,
 	int err = 0;
 	int tag;
 	struct completion wait;
-	unsigned long flags;
 	u8 upiu_flags;
 
 	down_read(&hba->clk_scaling_lock);
@@ -6639,13 +6648,13 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba,
 	tag = req->tag;
 	WARN_ON_ONCE(!ufshcd_valid_tag(hba, tag));
 
-	init_completion(&wait);
-	lrbp = &hba->lrb[tag];
-	if (unlikely(lrbp->in_use)) {
+	if (unlikely(test_bit(tag, &hba->outstanding_reqs))) {
 		err = -EBUSY;
 		goto out;
 	}
 
+	init_completion(&wait);
+	lrbp = &hba->lrb[tag];
 	WARN_ON(lrbp->cmd);
 	lrbp->cmd = NULL;
 	lrbp->sense_bufflen = 0;
@@ -6683,10 +6692,8 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba,
 
 	/* Make sure descriptors are ready before ringing the doorbell */
 	wmb();
-	spin_lock_irqsave(hba->host->host_lock, flags);
-	ufshcd_send_command(hba, tag);
-	spin_unlock_irqrestore(hba->host->host_lock, flags);
 
+	ufshcd_send_command(hba, tag);
 	/*
 	 * ignore the returning value here - ufshcd_check_query_response is
 	 * bound to fail since dev_cmd.query and dev_cmd.type were left empty.
@@ -6805,7 +6812,6 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd)
 	u32 pos;
 	int err;
 	u8 resp = 0xF, lun;
-	unsigned long flags;
 
 	host = cmd->device->host;
 	hba = shost_priv(host);
@@ -6824,11 +6830,9 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd)
 			err = ufshcd_clear_cmd(hba, pos);
 			if (err)
 				break;
+			__ufshcd_transfer_req_compl(hba, pos);
 		}
 	}
-	spin_lock_irqsave(host->host_lock, flags);
-	ufshcd_transfer_req_compl(hba);
-	spin_unlock_irqrestore(host->host_lock, flags);
 
 out:
 	hba->req_abort_count = 0;
@@ -7005,20 +7009,16 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 	 * will fail, due to spec violation, scsi err handling next step
 	 * will be to send LU reset which, again, is a spec violation.
 	 * To avoid these unnecessary/illegal steps, first we clean up
-	 * the lrb taken by this cmd and mark the lrb as in_use, then
-	 * queue the eh_work and bail.
+	 * the lrb taken by this cmd and re-set it in outstanding_reqs,
+	 * then queue the eh_work and bail.
 	 */
 	if (lrbp->lun == UFS_UPIU_UFS_DEVICE_WLUN) {
 		ufshcd_update_evt_hist(hba, UFS_EVT_ABORT, lrbp->lun);
+		__ufshcd_transfer_req_compl(hba, (1UL << tag));
+		set_bit(tag, &hba->outstanding_reqs);
 		spin_lock_irqsave(host->host_lock, flags);
-		if (lrbp->cmd) {
-			__ufshcd_transfer_req_compl(hba, (1UL << tag));
-			__set_bit(tag, &hba->outstanding_reqs);
-			lrbp->in_use = true;
-			hba->force_reset = true;
-			ufshcd_schedule_eh_work(hba);
-		}
-
+		hba->force_reset = true;
+		ufshcd_schedule_eh_work(hba);
 		spin_unlock_irqrestore(host->host_lock, flags);
 		goto out;
 	}
@@ -7031,9 +7031,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 
 	if (!err) {
 cleanup:
-		spin_lock_irqsave(host->host_lock, flags);
 		__ufshcd_transfer_req_compl(hba, (1UL << tag));
-		spin_unlock_irqrestore(host->host_lock, flags);
 out:
 		err = SUCCESS;
 	} else {
@@ -7063,19 +7061,15 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 static int ufshcd_host_reset_and_restore(struct ufs_hba *hba)
 {
 	int err;
-	unsigned long flags;
 
 	/*
 	 * Stop the host controller and complete the requests
 	 * cleared by h/w
 	 */
 	ufshcd_hba_stop(hba);
-
-	spin_lock_irqsave(hba->host->host_lock, flags);
 	hba->silence_err_logs = true;
 	ufshcd_complete_requests(hba);
 	hba->silence_err_logs = false;
-	spin_unlock_irqrestore(hba->host->host_lock, flags);
 
 	/* scale up clocks to max frequency before full reinitialization */
 	ufshcd_set_clk_freq(hba, true);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 0f0e62b..a70daf7 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -193,7 +193,6 @@ struct ufs_pm_lvl_states {
  * @crypto_key_slot: the key slot to use for inline crypto (-1 if none)
  * @data_unit_num: the data unit number for the first block for inline crypto
  * @req_abort_skip: skip request abort task flag
- * @in_use: indicates that this lrb is still in use
  */
 struct ufshcd_lrb {
 	struct utp_transfer_req_desc *utr_descriptor_ptr;
@@ -223,7 +222,6 @@ struct ufshcd_lrb {
 #endif
 
 	bool req_abort_skip;
-	bool in_use;
 };
 
 /**
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 2/3] scsi: ufs: Optimize host lock on transfer requests send/compl paths

[Bart Van Assche]

On 5/24/21 1:36 AM, Can Guo wrote:
> Current UFS IRQ handler is completely wrapped by host lock, and because
> ufshcd_send_command() is also protected by host lock, when IRQ handler
> fires, not only the CPU running the IRQ handler cannot send new requests,
> the rest CPUs can neither. Move the host lock wrapping the IRQ handler into
> specific branches, i.e., ufshcd_uic_cmd_compl(), ufshcd_check_errors(),
> ufshcd_tmc_handler() and ufshcd_transfer_req_compl(). Meanwhile, to further
> reduce occpuation of host lock in ufshcd_transfer_req_compl(), host lock is
> no longer required to call __ufshcd_transfer_req_compl(). As per test, the
> optimization can bring considerable gain to random read/write performance.

Hi Can,

Using the host lock to serialize the completion path against the
submission path was a common practice 11 years ago, before the host lock
push-down (see also
https://linux-scsi.vger.kernel.narkive.com/UEmGgwAc/rfc-patch-scsi-host-lock-push-down).
Modern SCSI LLDs should not use the SCSI host lock. Please consider
introducing one or more new synchronization objects in struct ufs_hba
and to use these instead of the SCSI host lock. That will save multiple
pointer dereferences in the hot path since hba->host->host_lock will
become hba->new_spin_lock.

An additional question is whether it is necessary for v3.0 UFS devices
to serialize the submission path against the completion path? Multiple
high-performance SCSI LLDs support hardware with separate submission and
completion queues and hence do not need any serialization between the
submission and the completion path. I'm asking this because it is likely
that sooner or later multiqueue support will be added in the UFS
specification. Benefiting from multiqueue support will require to rework
locking in the UFS driver anyway.

Thanks,

Bart.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH v1 2/3] scsi: ufs: Optimize host lock on transfer requests send/compl paths

[Avri Altman]

> On 5/24/2021 1:10 PM, Bart Van Assche wrote:
> > On 5/24/21 1:36 AM, Can Guo wrote:
> >> Current UFS IRQ handler is completely wrapped by host lock, and because
> >> ufshcd_send_command() is also protected by host lock, when IRQ handler
> >> fires, not only the CPU running the IRQ handler cannot send new
> requests,
> >> the rest CPUs can neither. Move the host lock wrapping the IRQ handler
> into
> >> specific branches, i.e., ufshcd_uic_cmd_compl(), ufshcd_check_errors(),
> >> ufshcd_tmc_handler() and ufshcd_transfer_req_compl(). Meanwhile, to
> further
> >> reduce occpuation of host lock in ufshcd_transfer_req_compl(), host lock
> is
> >> no longer required to call __ufshcd_transfer_req_compl(). As per test, the
> >> optimization can bring considerable gain to random read/write
> performance.
> >
> 
> > An additional question is whether it is necessary for v3.0 UFS devices
> > to serialize the submission path against the completion path? Multiple
> > high-performance SCSI LLDs support hardware with separate submission
> and
> > completion queues and hence do not need any serialization between the
> > submission and the completion path. I'm asking this because it is likely
> > that sooner or later multiqueue support will be added in the UFS
> > specification. Benefiting from multiqueue support will require to rework
> > locking in the UFS driver anyway.
> >
> Hi Bart,
> No it's not necessary to serialize both the paths. I think this series
> attempts to remove this serialization to a certain degree, which is
> what's giving the performance improvement.
> 
> Even if multiqueue support would be available in the future, I think
> this change is apt now for the current available specification.
I agree - this looks like the harbinger of a major change,
And going further with respect of hw queues,
will need the spec support - e.g. doorbell per lane, etc.

Thanks,
Avri
 
> > Thanks,
> >
> > Bart.
> >
> 
> 
> Thanks,
> -asd
> 
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> Forum,
> Linux Foundation Collaborative Project
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH v1 2/3] scsi: ufs: Optimize host lock on transfer requests send/compl paths

[Avri Altman]

> > On 5/24/2021 1:10 PM, Bart Van Assche wrote:
> > > On 5/24/21 1:36 AM, Can Guo wrote:
> > >> Current UFS IRQ handler is completely wrapped by host lock, and
> because
> > >> ufshcd_send_command() is also protected by host lock, when IRQ
> handler
> > >> fires, not only the CPU running the IRQ handler cannot send new
> > requests,
> > >> the rest CPUs can neither. Move the host lock wrapping the IRQ handler
> > into
> > >> specific branches, i.e., ufshcd_uic_cmd_compl(), ufshcd_check_errors(),
> > >> ufshcd_tmc_handler() and ufshcd_transfer_req_compl(). Meanwhile, to
> > further
> > >> reduce occpuation of host lock in ufshcd_transfer_req_compl(), host
> lock
> > is
> > >> no longer required to call __ufshcd_transfer_req_compl(). As per test,
> the
> > >> optimization can bring considerable gain to random read/write
> > performance.
> > >
> >
> > > An additional question is whether it is necessary for v3.0 UFS devices
> > > to serialize the submission path against the completion path? Multiple
> > > high-performance SCSI LLDs support hardware with separate submission
> > and
> > > completion queues and hence do not need any serialization between the
> > > submission and the completion path. I'm asking this because it is likely
> > > that sooner or later multiqueue support will be added in the UFS
> > > specification. Benefiting from multiqueue support will require to rework
> > > locking in the UFS driver anyway.
> > >
> > Hi Bart,
> > No it's not necessary to serialize both the paths. I think this series
> > attempts to remove this serialization to a certain degree, which is
> > what's giving the performance improvement.
Btw, Is this performance improvement is on top of rq_affinity 2 or 1?

Thanks,
Avri

> >
> > Even if multiqueue support would be available in the future, I think
> > this change is apt now for the current available specification.
> I agree - this looks like the harbinger of a major change,
> And going further with respect of hw queues,
> will need the spec support - e.g. doorbell per lane, etc.
> 
> Thanks,
> Avri
> 
> > > Thanks,
> > >
> > > Bart.
> > >
> >
> >
> > Thanks,
> > -asd
> >
> > --
> > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> > Forum,
> > Linux Foundation Collaborative Project
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 2/3] scsi: ufs: Optimize host lock on transfer requests send/compl paths

[Bart Van Assche]

On 5/24/21 6:40 PM, Can Guo wrote:
> Agree with all above, and what you ask is right what we are doing in
> the 3rd change - get rid of host lock on dispatch and completion
> paths.
> 
> I agree with using dedicated spin locks for dedicated purposes in
> UFS driver, e.g., clk gating has its own gating_lock and clk scaling
> has its own scaling_lock. But this specific series is only for
> improving performance. We will take your comments into consideration
> and address it in future.
Thanks!

Bart.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 2/3] scsi: ufs: Optimize host lock on transfer requests send/compl paths

[Bean Huo]

On Mon, 2021-05-24 at 01:36 -0700, Can Guo wrote:
> Current UFS IRQ handler is completely wrapped by host lock, and
> because
> 
> ufshcd_send_command() is also protected by host lock, when IRQ
> handler
> 
> fires, not only the CPU running the IRQ handler cannot send new
> requests,
> 
> the rest CPUs can neither. Move the host lock wrapping the IRQ
> handler into
> 
> specific branches, i.e., ufshcd_uic_cmd_compl(),
> ufshcd_check_errors(),
> 
> ufshcd_tmc_handler() and ufshcd_transfer_req_compl(). Meanwhile, to
> further
> 
> reduce occpuation of host lock in ufshcd_transfer_req_compl(), host
> lock is
> 
> no longer required to call __ufshcd_transfer_req_compl(). As per
> test, the
> 
> optimization can bring considerable gain to random read/write
> performance.
> 
> 
> 
> Cc: Stanley Chu <stanley.chu@mediatek.com>
> 
> Co-developed-by: Asutosh Das <asutoshd@codeaurora.org>
> 
> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
> 
> Signed-off-by: Can Guo <cang@codeaurora.org>

Can,
The patch looks good to me.
I did a UFS queue limitation test before, observed that once the queue
is full, then the active task number in the queue will get down. For
the Nvme, the scenario is the same. You can refer to the slide 23, and
slide 24 in the pdf:
https://elinux.org/images/6/6c/Linux_Storage_System_Bottleneck_Exploration_V0.3.pdf I don't know if your patch can fix this
issue.

Unfortunately, I cannot verify UTRLCNR usage flow since my platform is
v2.1. But at least my test can prove that the patch doesn't impact the
legacy(UFSHCI is less than v3.0) doorbell usage flow.

Reviewed-by: Bean Huo <beanhuo@micron.com>


Bean


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 2/3] scsi: ufs: Optimize host lock on transfer requests send/compl paths

[Bart Van Assche]

On 5/31/21 9:04 AM, Bean Huo wrote:
> I did a UFS queue limitation test before, observed that once the
> queue is full, then the active task number in the queue will get
> down. For the Nvme, the scenario is the same. You can refer to the
> slide 23, and slide 24 in the pdf: 
> https://elinux.org/images/6/6c/Linux_Storage_System_Bottleneck_Exploration_V0.3.pdf
> I don't know if your patch can fix this issue.

Hi Bean,

That's a very interesting presentation. Unfortunately the overhead for
SCSI in that presentation includes the SCSI core + UFS driver. Given the
use of the host lock in the version of the UFS driver that was used to
prepare that presentation, the overhead introduced by the UFS driver may
be significant. Maybe someone should measure the overhead of the
scsi_debug driver and compare it with the NVMe loopback driver to get a
better idea of how the overhead of these two subsystems compare to each
other?

Bart.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 2/3] scsi: ufs: Optimize host lock on transfer requests send/compl paths

[Stanley Chu]

Hi Can,

On Mon, 2021-05-24 at 01:36 -0700, Can Guo wrote:
> Current UFS IRQ handler is completely wrapped by host lock, and because
> ufshcd_send_command() is also protected by host lock, when IRQ handler
> fires, not only the CPU running the IRQ handler cannot send new requests,
> the rest CPUs can neither. Move the host lock wrapping the IRQ handler into
> specific branches, i.e., ufshcd_uic_cmd_compl(), ufshcd_check_errors(),
> ufshcd_tmc_handler() and ufshcd_transfer_req_compl(). Meanwhile, to further
> reduce occpuation of host lock in ufshcd_transfer_req_compl(), host lock is
> no longer required to call __ufshcd_transfer_req_compl(). As per test, the
> optimization can bring considerable gain to random read/write performance.
> 
> Cc: Stanley Chu <stanley.chu@mediatek.com>
> Co-developed-by: Asutosh Das <asutoshd@codeaurora.org>
> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
> Signed-off-by: Can Guo <cang@codeaurora.org>

According to my test, the performance indeed has impressive improvement
with this series!

Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>




>  #endif
>  
>  	bool req_abort_skip;
> -	bool in_use;
>  };
>  
>  /**

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 2/3] scsi: ufs: Optimize host lock on transfer requests send/compl paths

[Bart Van Assche]

On 5/24/21 1:36 AM, Can Guo wrote:
> @@ -2688,6 +2705,43 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
> +	case UFSHCD_STATE_EH_SCHEDULED_FATAL:
> +		/*
> +		 * pm_runtime_get_sync() is used at error handling preparation
> +		 * stage. If a scsi cmd, e.g. the SSU cmd, is sent from hba's
> +		 * PM ops, it can never be finished if we let SCSI layer keep
> +		 * retrying it, which gets err handler stuck forever. Neither
> +		 * can we let the scsi cmd pass through, because UFS is in bad
> +		 * state, the scsi cmd may eventually time out, which will get
> +		 * err handler blocked for too long. So, just fail the scsi cmd
> +		 * sent from PM ops, err handler can recover PM error anyways.
> +		 */
> +		if (hba->pm_op_in_progress) {
> +			hba->force_reset = true;
> +			set_host_byte(cmd, DID_BAD_TARGET);
> +			cmd->scsi_done(cmd);
> +			goto out;
> +		}
> +		fallthrough;

Hi Can,

I know that this patch only moves the above code and that the above code
has not been introduced by this patch. Anyway, is my understanding
correct that ufshcd_err_handler() can change the host controller state
from UFSHCD_STATE_EH_SCHEDULED_FATAL into UFSHCD_STATE_RESET and next
into UFSHCD_STATE_OPERATIONAL? If so, if the above code completes a READ
with status DID_BAD_TARGET and if recovery by the error handler
succeeds, will that cause the filesystem above the UFS driver to change
into read-only mode? If the above code completes a WRITE with status
DID_BAD_TARGET, will that cause data corruption? Is there any other
solution to prevent data corruption than merging the
UFSHCD_STATE_EH_SCHEDULED_FATAL and UFSHCD_STATE_EH_SCHEDULED_NON_FATAL
back into a single state and changing the ufshcd_rpm_get_sync(hba) call
in ufshcd_err_handling_prepare() into a pm_runtime_get_noresume() call?

Thanks,

Bart.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 2/3] scsi: ufs: Optimize host lock on transfer requests send/compl paths

[Bart Van Assche]

On 5/24/21 1:36 AM, Can Guo wrote:
> Current UFS IRQ handler is completely wrapped by host lock, and because
> ufshcd_send_command() is also protected by host lock, when IRQ handler
> fires, not only the CPU running the IRQ handler cannot send new requests,
> the rest CPUs can neither. Move the host lock wrapping the IRQ handler into
> specific branches, i.e., ufshcd_uic_cmd_compl(), ufshcd_check_errors(),
> ufshcd_tmc_handler() and ufshcd_transfer_req_compl(). Meanwhile, to further
> reduce occpuation of host lock in ufshcd_transfer_req_compl(), host lock is
> no longer required to call __ufshcd_transfer_req_compl(). As per test, the
> optimization can bring considerable gain to random read/write performance.

Hi Can,

Since this patch has been applied on the AOSP kernel we see 100%
reproducible lockups appearing on multiple test setups. Examples of call
traces:

blk_execute_rq()
__scsi_execute()
sd_sync_cache()
sd_suspend_common()
sd_suspend_system()
scsi_bus_suspend()
__device_suspend()

blk_execute_rq()
__scsi_execute()
ufshcd_clear_ua_wlun()
ufshcd_err_handling_unprepare()
ufshcd_err_handler()
process_one_work()

Reverting this patch and the next patch from this series solved the
lockups. Do you prefer to revert this patch or do you perhaps want us to
test a potential fix?

Thanks,

Bart.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 2/3] scsi: ufs: Optimize host lock on transfer requests send/compl paths

[Bart Van Assche]

On 6/28/21 10:41 PM, Can Guo wrote:
> I am waiting for more infos/logs/dumps on Buganizor to look into it.
> With above calltrace snippet, it is hard to figure out what is happening.
> Besides, we've tested this series before go upstream and we didn't
> see such problem.

Hi Can,

Jaegeuk has posted a fix as you may have noticed.

Thanks,

Bart.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 3/3] scsi: ufs: Utilize Transfer Request List Completion Notification Register

[Can Guo]

By reading the UTP Transfer Request List Completion Notification Register,
which is added in UFSHCI Ver 3.0, SW can easily get the compeleted transfer
requests. Thus, SW can get rid of host lock, which is used to synchronize
the tr_doorbell and outstanding_reqs, on transfer requests dispatch and
completion paths. This can further benefit random read/write performance.

Cc: Stanley Chu <stanley.chu@mediatek.com>
Co-developed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 52 +++++++++++++++++++++++++++++++++--------------
 drivers/scsi/ufs/ufshcd.h |  5 +++++
 drivers/scsi/ufs/ufshci.h |  1 +
 3 files changed, 43 insertions(+), 15 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index b9b5e61..2b7ad26 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2106,7 +2106,6 @@ static inline
 void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
 {
 	struct ufshcd_lrb *lrbp = &hba->lrb[task_tag];
-	unsigned long flags;
 
 	lrbp->issue_time_stamp = ktime_get();
 	lrbp->compl_time_stamp = ktime_set(0, 0);
@@ -2115,10 +2114,19 @@ void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
 	ufshcd_clk_scaling_start_busy(hba);
 	if (unlikely(ufshcd_should_inform_monitor(hba, lrbp)))
 		ufshcd_start_monitor(hba, lrbp);
-	spin_lock_irqsave(hba->host->host_lock, flags);
-	set_bit(task_tag, &hba->outstanding_reqs);
-	ufshcd_writel(hba, 1 << task_tag, REG_UTP_TRANSFER_REQ_DOOR_BELL);
-	spin_unlock_irqrestore(hba->host->host_lock, flags);
+	if (ufshcd_has_utrlcnr(hba)) {
+		set_bit(task_tag, &hba->outstanding_reqs);
+		ufshcd_writel(hba, 1 << task_tag,
+			      REG_UTP_TRANSFER_REQ_DOOR_BELL);
+	} else {
+		unsigned long flags;
+
+		spin_lock_irqsave(hba->host->host_lock, flags);
+		set_bit(task_tag, &hba->outstanding_reqs);
+		ufshcd_writel(hba, 1 << task_tag,
+			      REG_UTP_TRANSFER_REQ_DOOR_BELL);
+		spin_unlock_irqrestore(hba->host->host_lock, flags);
+	}
 	/* Make sure that doorbell is committed immediately */
 	wmb();
 }
@@ -5260,17 +5268,17 @@ static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
 }
 
 /**
- * ufshcd_transfer_req_compl - handle SCSI and query command completion
+ * ufshcd_trc_handler - handle transfer requests completion
  * @hba: per adapter instance
+ * @use_utrlcnr: get completed requests from UTRLCNR
  *
  * Returns
  *  IRQ_HANDLED - If interrupt is valid
  *  IRQ_NONE    - If invalid interrupt
  */
-static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba)
+static irqreturn_t ufshcd_trc_handler(struct ufs_hba *hba, bool use_utrlcnr)
 {
-	unsigned long completed_reqs, flags;
-	u32 tr_doorbell;
+	unsigned long completed_reqs = 0;
 
 	/* Resetting interrupt aggregation counters first and reading the
 	 * DOOR_BELL afterward allows us to handle all the completed requests.
@@ -5283,10 +5291,24 @@ static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba)
 	    !(hba->quirks & UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR))
 		ufshcd_reset_intr_aggr(hba);
 
-	spin_lock_irqsave(hba->host->host_lock, flags);
-	tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
-	completed_reqs = tr_doorbell ^ hba->outstanding_reqs;
-	spin_unlock_irqrestore(hba->host->host_lock, flags);
+	if (use_utrlcnr) {
+		u32 utrlcnr;
+
+		utrlcnr = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_LIST_COMPL);
+		if (utrlcnr) {
+			ufshcd_writel(hba, utrlcnr,
+				      REG_UTP_TRANSFER_REQ_LIST_COMPL);
+			completed_reqs = utrlcnr;
+		}
+	} else {
+		unsigned long flags;
+		u32 tr_doorbell;
+
+		spin_lock_irqsave(hba->host->host_lock, flags);
+		tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
+		completed_reqs = tr_doorbell ^ hba->outstanding_reqs;
+		spin_unlock_irqrestore(hba->host->host_lock, flags);
+	}
 
 	if (completed_reqs) {
 		__ufshcd_transfer_req_compl(hba, completed_reqs);
@@ -5768,7 +5790,7 @@ static void ufshcd_exception_event_handler(struct work_struct *work)
 /* Complete requests that have door-bell cleared */
 static void ufshcd_complete_requests(struct ufs_hba *hba)
 {
-	ufshcd_transfer_req_compl(hba);
+	ufshcd_trc_handler(hba, false);
 	ufshcd_tmc_handler(hba);
 }
 
@@ -6409,7 +6431,7 @@ static irqreturn_t ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
 		retval |= ufshcd_tmc_handler(hba);
 
 	if (intr_status & UTP_TRANSFER_REQ_COMPL)
-		retval |= ufshcd_transfer_req_compl(hba);
+		retval |= ufshcd_trc_handler(hba, ufshcd_has_utrlcnr(hba));
 
 	return retval;
 }
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index a70daf7..d5325e8 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -1159,6 +1159,11 @@ static inline u32 ufshcd_vops_get_ufs_hci_version(struct ufs_hba *hba)
 	return ufshcd_readl(hba, REG_UFS_VERSION);
 }
 
+static inline bool ufshcd_has_utrlcnr(struct ufs_hba *hba)
+{
+	return (hba->ufs_version >= ufshci_version(3, 0));
+}
+
 static inline int ufshcd_vops_clk_scale_notify(struct ufs_hba *hba,
 			bool up, enum ufs_notify_change_status status)
 {
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index de95be5..5affb1f 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -39,6 +39,7 @@ enum {
 	REG_UTP_TRANSFER_REQ_DOOR_BELL		= 0x58,
 	REG_UTP_TRANSFER_REQ_LIST_CLEAR		= 0x5C,
 	REG_UTP_TRANSFER_REQ_LIST_RUN_STOP	= 0x60,
+	REG_UTP_TRANSFER_REQ_LIST_COMPL		= 0x64,
 	REG_UTP_TASK_REQ_LIST_BASE_L		= 0x70,
 	REG_UTP_TASK_REQ_LIST_BASE_H		= 0x74,
 	REG_UTP_TASK_REQ_DOOR_BELL		= 0x78,
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 3/3] scsi: ufs: Utilize Transfer Request List Completion Notification Register

[Bean Huo]

On Mon, 2021-05-24 at 01:36 -0700, Can Guo wrote:
> By reading the UTP Transfer Request List Completion Notification
> Register,
> 
> which is added in UFSHCI Ver 3.0, SW can easily get the compeleted
> transfer
> 
> requests. Thus, SW can get rid of host lock, which is used to
> synchronize
> 
> the tr_doorbell and outstanding_reqs, on transfer requests dispatch
> and
> 
> completion paths. This can further benefit random read/write
> performance.
> 
> 
> 
> Cc: Stanley Chu <stanley.chu@mediatek.com>
> 
> Co-developed-by: Asutosh Das <asutoshd@codeaurora.org>
> 
> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
> 
> Signed-off-by: Can Guo <cang@codeaurora.org>

Reviewed-by: Bean Huo <beanhuo@micron.com>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 3/3] scsi: ufs: Utilize Transfer Request List Completion Notification Register

[Stanley Chu]

Hi Can,

On Mon, 2021-05-24 at 01:36 -0700, Can Guo wrote:
> By reading the UTP Transfer Request List Completion Notification Register,
> which is added in UFSHCI Ver 3.0, SW can easily get the compeleted transfer
> requests. Thus, SW can get rid of host lock, which is used to synchronize
> the tr_doorbell and outstanding_reqs, on transfer requests dispatch and
> completion paths. This can further benefit random read/write performance.
> 
> Cc: Stanley Chu <stanley.chu@mediatek.com>
> Co-developed-by: Asutosh Das <asutoshd@codeaurora.org>
> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
> Signed-off-by: Can Guo <cang@codeaurora.org>

Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>


> +++ b/drivers/scsi/ufs/ufshci.h
> @@ -39,6 +39,7 @@ enum {
>  	REG_UTP_TRANSFER_REQ_DOOR_BELL		= 0x58,
>  	REG_UTP_TRANSFER_REQ_LIST_CLEAR		= 0x5C,
>  	REG_UTP_TRANSFER_REQ_LIST_RUN_STOP	= 0x60,
> +	REG_UTP_TRANSFER_REQ_LIST_COMPL		= 0x64,
>  	REG_UTP_TASK_REQ_LIST_BASE_L		= 0x70,
>  	REG_UTP_TASK_REQ_LIST_BASE_H		= 0x74,
>  	REG_UTP_TASK_REQ_DOOR_BELL		= 0x78,

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel