Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH V1 0/6] Glink native fixes upstreaming
@ 2020-07-30  5:18 Deepak Kumar Singh
  2020-07-30  5:18 ` [PATCH V1 1/6] rpmsg: glink: fix destroy channel endpoint logic Deepak Kumar Singh
                   ` (5 more replies)
  0 siblings, 6 replies; 7+ messages in thread
From: Deepak Kumar Singh @ 2020-07-30  5:18 UTC (permalink / raw)
  To: bjorn.andersson, clew
  Cc: mathieu.poirier, linux-arm-msm, linux-remoteproc, linux-kernel,
	Deepak Kumar Singh

Includes fixes for -
Few race conditions while channel release and close
Proper unregistration of rpmsg device to avoid use of stale device
Send notify command to remote when glink fifo is full
Handling packet size larger that 16K

Arun Kumar Neelakantam (3):
  rpmsg: glink: Add TX_DATA_CONT command while sending
  rpmsg: glink: Remove the rpmsg dev in close_ack
  rpmsg: glink: Send READ_NOTIFY command in FIFO full case

Chris Lew (2):
  rpmsg: glink: Deny intent request if reusable intent fits
  rpmsg: glink: Remove channel decouple from rpdev release

Konstantin Dorfman (1):
  rpmsg: glink: fix destroy channel endpoint logic

 drivers/rpmsg/qcom_glink_native.c | 109 +++++++++++++++++++++++++++++++++++---
 1 file changed, 101 insertions(+), 8 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-30  5:18 [PATCH V1 0/6] Glink native fixes upstreaming Deepak Kumar Singh
2020-07-30  5:18 ` [PATCH V1 1/6] rpmsg: glink: fix destroy channel endpoint logic Deepak Kumar Singh
2020-07-30  5:18 ` [PATCH V1 2/6] rpmsg: glink: Deny intent request if reusable intent fits Deepak Kumar Singh
2020-07-30  5:18 ` [PATCH V1 3/6] rpmsg: glink: Add TX_DATA_CONT command while sending Deepak Kumar Singh
2020-07-30  5:18 ` [PATCH V1 4/6] rpmsg: glink: Remove the rpmsg dev in close_ack Deepak Kumar Singh
2020-07-30  5:18 ` [PATCH V1 5/6] rpmsg: glink: Remove channel decouple from rpdev release Deepak Kumar Singh
2020-07-30  5:18 ` [PATCH V1 6/6] rpmsg: glink: Send READ_NOTIFY command in FIFO full case Deepak Kumar Singh

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org
	public-inbox-index linux-arm-msm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git