linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/3] remoteproc: qcom: q6v5-wcss: Add driver data for IPQ6018
@ 2021-01-29 17:11 Gokul Sriram Palanisamy
  2021-01-29 17:11 ` [PATCH 1/3] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding " Gokul Sriram Palanisamy
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Gokul Sriram Palanisamy @ 2021-01-29 17:11 UTC (permalink / raw)
  To: sboyd, agross, bjorn.andersson, david.brown, devicetree,
	jassisinghbrar, linux-arm-msm, linux-clk, linux-kernel,
	linux-remoteproc, mark.rutland, mturquette, ohad, robh+dt,
	sricharan, gokulsri

Q6 based WiFi fw loading is supported across
different targets, ex: IPQ8074/QCS404. In order to
support different fw name for IPQ6018, populate
hardcoded param using compatible and driver data.

This series depends on
[PATCH v8] remoteproc: qcom: q6v5-wcss: Add support for secure pil

Gokul Sriram Palanisamy (3):
  dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for IPQ6018
  remoteproc: qcom: wcss: populate driver data for IPQ6018
  arm64: dts: ipq6018: Update WCSS PIL driver compatible

 .../devicetree/bindings/remoteproc/qcom,q6v5.txt      |  4 ++++
 arch/arm64/boot/dts/qcom/ipq6018.dtsi                 |  2 +-
 drivers/remoteproc/qcom_q6v5_wcss.c                   | 19 +++++++++++++++++--
 3 files changed, 22 insertions(+), 3 deletions(-)

-- 
2.7.4


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 1/3] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for IPQ6018
  2021-01-29 17:11 [PATCH 0/3] remoteproc: qcom: q6v5-wcss: Add driver data for IPQ6018 Gokul Sriram Palanisamy
@ 2021-01-29 17:11 ` Gokul Sriram Palanisamy
  2021-02-09 20:05   ` Rob Herring
  2021-01-29 17:11 ` [PATCH 2/3] remoteproc: qcom: wcss: populate driver data " Gokul Sriram Palanisamy
  2021-01-29 17:12 ` [PATCH 3/3] arm64: dts: ipq6018: Update WCSS PIL driver compatible Gokul Sriram Palanisamy
  2 siblings, 1 reply; 7+ messages in thread
From: Gokul Sriram Palanisamy @ 2021-01-29 17:11 UTC (permalink / raw)
  To: sboyd, agross, bjorn.andersson, david.brown, devicetree,
	jassisinghbrar, linux-arm-msm, linux-clk, linux-kernel,
	linux-remoteproc, mark.rutland, mturquette, ohad, robh+dt,
	sricharan, gokulsri

Add a new modem compatible string for IPQ6018 SoCs

Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
---
 Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 69c49c7..7f1d5783 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -9,6 +9,7 @@ on the Qualcomm Hexagon core.
 	Definition: must be one of:
 		    "qcom,q6v5-pil",
 		    "qcom,ipq8074-wcss-pil"
+		    "qcom,ipq6018-wcss-pil"
 		    "qcom,qcs404-wcss-pil"
 		    "qcom,msm8916-mss-pil",
 		    "qcom,msm8974-mss-pil"
@@ -40,6 +41,7 @@ on the Qualcomm Hexagon core.
 		    string:
 	qcom,q6v5-pil:
 	qcom,ipq8074-wcss-pil:
+	qcom,ipq6018-wcss-pil:
 	qcom,qcs404-wcss-pil:
 	qcom,msm8916-mss-pil:
 	qcom,msm8974-mss-pil:
@@ -68,6 +70,7 @@ on the Qualcomm Hexagon core.
 	Value type: <stringlist>
 	Definition: The clocks needed depend on the compatible string:
 	qcom,ipq8074-wcss-pil:
+	qcom,ipq6018-wcss-pil:
 		    no clock names required
 	qcom,qcs404-wcss-pil:
 		    must be "xo", "gcc_abhs_cbcr", "gcc_abhs_cbcr",
@@ -165,6 +168,7 @@ For the compatible string below the following supplies are required:
 	Value type: <stringlist>
 	Definition: The power-domains needed depend on the compatible string:
 	qcom,ipq8074-wcss-pil:
+	qcom,ipq6018-wcss-pil:
 		    no power-domain names required
 	qcom,q6v5-pil:
 	qcom,msm8916-mss-pil:
-- 
2.7.4


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 2/3] remoteproc: qcom: wcss: populate driver data for IPQ6018
  2021-01-29 17:11 [PATCH 0/3] remoteproc: qcom: q6v5-wcss: Add driver data for IPQ6018 Gokul Sriram Palanisamy
  2021-01-29 17:11 ` [PATCH 1/3] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding " Gokul Sriram Palanisamy
@ 2021-01-29 17:11 ` Gokul Sriram Palanisamy
  2021-03-18  2:10   ` Bjorn Andersson
  2021-01-29 17:12 ` [PATCH 3/3] arm64: dts: ipq6018: Update WCSS PIL driver compatible Gokul Sriram Palanisamy
  2 siblings, 1 reply; 7+ messages in thread
From: Gokul Sriram Palanisamy @ 2021-01-29 17:11 UTC (permalink / raw)
  To: sboyd, agross, bjorn.andersson, david.brown, devicetree,
	jassisinghbrar, linux-arm-msm, linux-clk, linux-kernel,
	linux-remoteproc, mark.rutland, mturquette, ohad, robh+dt,
	sricharan, gokulsri

Populate hardcoded param using driver data for IPQ6018 SoCs.

Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_wcss.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index 7c64bfc..bc9531c 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -965,7 +965,7 @@ static int q6v5_alloc_memory_region(struct q6v5_wcss *wcss)
 	return 0;
 }
 
-static int ipq8074_init_clock(struct q6v5_wcss *wcss)
+static int ipq_init_clock(struct q6v5_wcss *wcss)
 {
 	int ret;
 
@@ -1172,7 +1172,7 @@ static int q6v5_wcss_remove(struct platform_device *pdev)
 }
 
 static const struct wcss_data wcss_ipq8074_res_init = {
-	.init_clock = ipq8074_init_clock,
+	.init_clock = ipq_init_clock,
 	.q6_firmware_name = "IPQ8074/q6_fw.mdt",
 	.m3_firmware_name = "IPQ8074/m3_fw.mdt",
 	.crash_reason_smem = WCSS_CRASH_REASON,
@@ -1185,6 +1185,20 @@ static const struct wcss_data wcss_ipq8074_res_init = {
 	.need_mem_protection = true,
 };
 
+static const struct wcss_data wcss_ipq6018_res_init = {
+	.init_clock = ipq_init_clock,
+	.q6_firmware_name = "IPQ6018/q6_fw.mdt",
+	.m3_firmware_name = "IPQ6018/m3_fw.mdt",
+	.crash_reason_smem = WCSS_CRASH_REASON,
+	.aon_reset_required = true,
+	.wcss_q6_reset_required = true,
+	.bcr_reset_required = false,
+	.ssr_name = "q6wcss",
+	.ops = &q6v5_wcss_ipq8074_ops,
+	.requires_force_stop = true,
+	.need_mem_protection = true,
+};
+
 static const struct wcss_data wcss_qcs404_res_init = {
 	.init_clock = qcs404_init_clock,
 	.init_regulator = qcs404_init_regulator,
@@ -1203,6 +1217,7 @@ static const struct wcss_data wcss_qcs404_res_init = {
 
 static const struct of_device_id q6v5_wcss_of_match[] = {
 	{ .compatible = "qcom,ipq8074-wcss-pil", .data = &wcss_ipq8074_res_init },
+	{ .compatible = "qcom,ipq6018-wcss-pil", .data = &wcss_ipq6018_res_init },
 	{ .compatible = "qcom,qcs404-wcss-pil", .data = &wcss_qcs404_res_init },
 	{ },
 };
-- 
2.7.4


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 3/3] arm64: dts: ipq6018: Update WCSS PIL driver compatible
  2021-01-29 17:11 [PATCH 0/3] remoteproc: qcom: q6v5-wcss: Add driver data for IPQ6018 Gokul Sriram Palanisamy
  2021-01-29 17:11 ` [PATCH 1/3] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding " Gokul Sriram Palanisamy
  2021-01-29 17:11 ` [PATCH 2/3] remoteproc: qcom: wcss: populate driver data " Gokul Sriram Palanisamy
@ 2021-01-29 17:12 ` Gokul Sriram Palanisamy
  2 siblings, 0 replies; 7+ messages in thread
From: Gokul Sriram Palanisamy @ 2021-01-29 17:12 UTC (permalink / raw)
  To: sboyd, agross, bjorn.andersson, david.brown, devicetree,
	jassisinghbrar, linux-arm-msm, linux-clk, linux-kernel,
	linux-remoteproc, mark.rutland, mturquette, ohad, robh+dt,
	sricharan, gokulsri

Updated WCSS PIL driver node with IPQ6018 specific
compatible to enable SoC specific driver data.

Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 9fa5b02..2e6b23b 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -477,7 +477,7 @@
 		};
 
 		q6v5_wcss: remoteproc@cd00000 {
-			compatible = "qcom,ipq8074-wcss-pil";
+			compatible = "qcom,ipq6018-wcss-pil";
 			reg = <0x0 0x0cd00000 0x0 0x4040>,
 			      <0x0 0x004ab000 0x0 0x20>;
 			reg-names = "qdsp6",
-- 
2.7.4


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH 1/3] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for IPQ6018
  2021-01-29 17:11 ` [PATCH 1/3] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding " Gokul Sriram Palanisamy
@ 2021-02-09 20:05   ` Rob Herring
  0 siblings, 0 replies; 7+ messages in thread
From: Rob Herring @ 2021-02-09 20:05 UTC (permalink / raw)
  To: Gokul Sriram Palanisamy
  Cc: linux-arm-msm, robh+dt, sboyd, agross, jassisinghbrar,
	bjorn.andersson, mturquette, mark.rutland, sricharan, devicetree,
	linux-remoteproc, linux-kernel, david.brown, linux-clk, ohad

On Fri, 29 Jan 2021 22:41:58 +0530, Gokul Sriram Palanisamy wrote:
> Add a new modem compatible string for IPQ6018 SoCs
> 
> Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH 2/3] remoteproc: qcom: wcss: populate driver data for IPQ6018
  2021-01-29 17:11 ` [PATCH 2/3] remoteproc: qcom: wcss: populate driver data " Gokul Sriram Palanisamy
@ 2021-03-18  2:10   ` Bjorn Andersson
  0 siblings, 0 replies; 7+ messages in thread
From: Bjorn Andersson @ 2021-03-18  2:10 UTC (permalink / raw)
  To: Gokul Sriram Palanisamy
  Cc: sboyd, agross, david.brown, devicetree, jassisinghbrar,
	linux-arm-msm, linux-clk, linux-kernel, linux-remoteproc,
	mark.rutland, mturquette, ohad, robh+dt, sricharan

On Fri 29 Jan 11:11 CST 2021, Gokul Sriram Palanisamy wrote:

> Populate hardcoded param using driver data for IPQ6018 SoCs.
> 
> Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
> ---
>  drivers/remoteproc/qcom_q6v5_wcss.c | 19 +++++++++++++++++--
>  1 file changed, 17 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
> index 7c64bfc..bc9531c 100644
> --- a/drivers/remoteproc/qcom_q6v5_wcss.c
> +++ b/drivers/remoteproc/qcom_q6v5_wcss.c
> @@ -965,7 +965,7 @@ static int q6v5_alloc_memory_region(struct q6v5_wcss *wcss)
>  	return 0;
>  }
>  
> -static int ipq8074_init_clock(struct q6v5_wcss *wcss)
> +static int ipq_init_clock(struct q6v5_wcss *wcss)
>  {
>  	int ret;
>  
> @@ -1172,7 +1172,7 @@ static int q6v5_wcss_remove(struct platform_device *pdev)
>  }
>  
>  static const struct wcss_data wcss_ipq8074_res_init = {
> -	.init_clock = ipq8074_init_clock,
> +	.init_clock = ipq_init_clock,
>  	.q6_firmware_name = "IPQ8074/q6_fw.mdt",
>  	.m3_firmware_name = "IPQ8074/m3_fw.mdt",
>  	.crash_reason_smem = WCSS_CRASH_REASON,
> @@ -1185,6 +1185,20 @@ static const struct wcss_data wcss_ipq8074_res_init = {
>  	.need_mem_protection = true,
>  };
>  
> +static const struct wcss_data wcss_ipq6018_res_init = {
> +	.init_clock = ipq_init_clock,
> +	.q6_firmware_name = "IPQ6018/q6_fw.mdt",
> +	.m3_firmware_name = "IPQ6018/m3_fw.mdt",
> +	.crash_reason_smem = WCSS_CRASH_REASON,
> +	.aon_reset_required = true,
> +	.wcss_q6_reset_required = true,
> +	.bcr_reset_required = false,
> +	.ssr_name = "q6wcss",
> +	.ops = &q6v5_wcss_ipq8074_ops,
> +	.requires_force_stop = true,
> +	.need_mem_protection = true,
> +};
> +
>  static const struct wcss_data wcss_qcs404_res_init = {
>  	.init_clock = qcs404_init_clock,
>  	.init_regulator = qcs404_init_regulator,
> @@ -1203,6 +1217,7 @@ static const struct wcss_data wcss_qcs404_res_init = {
>  
>  static const struct of_device_id q6v5_wcss_of_match[] = {
>  	{ .compatible = "qcom,ipq8074-wcss-pil", .data = &wcss_ipq8074_res_init },
> +	{ .compatible = "qcom,ipq6018-wcss-pil", .data = &wcss_ipq6018_res_init },

As you rebase on the reworked dependency, please sorted alphabetically
(i.e 6 < 8)

Regards,
Bjorn

>  	{ .compatible = "qcom,qcs404-wcss-pil", .data = &wcss_qcs404_res_init },
>  	{ },
>  };
> -- 
> 2.7.4
> 

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 0/3] remoteproc: qcom: q6v5-wcss: Add driver data for IPQ6018
@ 2021-01-29 17:09 Gokul Sriram Palanisamy
  0 siblings, 0 replies; 7+ messages in thread
From: Gokul Sriram Palanisamy @ 2021-01-29 17:09 UTC (permalink / raw)
  To: sboyd, agross, bjorn.andersson, david.brown, devicetree,
	jassisinghbrar, linux-arm-msm, linux-clk, linux-kernel,
	linux-remoteproc, mark.rutland, mturquette, ohad, robh+dt,
	sricharan, nprakash, gokulsri

Q6 based WiFi fw loading is supported across
different targets, ex: IPQ8074/QCS404. In order to
support different fw name for IPQ6018, populate
hardcoded param using compatible and driver data. 

Gokul Sriram Palanisamy (3):
  dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for IPQ6018
  remoteproc: qcom: wcss: populate driver data for IPQ6018
  arm64: dts: ipq6018: Update WCSS PIL driver compatible

 .../devicetree/bindings/remoteproc/qcom,q6v5.txt      |  4 ++++
 arch/arm64/boot/dts/qcom/ipq6018.dtsi                 |  2 +-
 drivers/remoteproc/qcom_q6v5_wcss.c                   | 19 +++++++++++++++++--
 3 files changed, 22 insertions(+), 3 deletions(-)

-- 
2.7.4


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2021-03-18  2:11 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-29 17:11 [PATCH 0/3] remoteproc: qcom: q6v5-wcss: Add driver data for IPQ6018 Gokul Sriram Palanisamy
2021-01-29 17:11 ` [PATCH 1/3] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding " Gokul Sriram Palanisamy
2021-02-09 20:05   ` Rob Herring
2021-01-29 17:11 ` [PATCH 2/3] remoteproc: qcom: wcss: populate driver data " Gokul Sriram Palanisamy
2021-03-18  2:10   ` Bjorn Andersson
2021-01-29 17:12 ` [PATCH 3/3] arm64: dts: ipq6018: Update WCSS PIL driver compatible Gokul Sriram Palanisamy
  -- strict thread matches above, loose matches on Subject: below --
2021-01-29 17:09 [PATCH 0/3] remoteproc: qcom: q6v5-wcss: Add driver data for IPQ6018 Gokul Sriram Palanisamy

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).