From: Prasad Malisetty <pmaliset@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
bhelgaas@google.com, robh+dt@kernel.org, swboyd@chromium.org,
lorenzo.pieralisi@arm.com, svarbanov@mm-sol.com
Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
dianders@chromium.org, mka@chromium.org, vbadigan@codeaurora.org,
sallenki@codeaurora.org, manivannan.sadhasivam@linaro.org,
Prasad Malisetty <pmaliset@codeaurora.org>
Subject: [PATCH v8 3/4] arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board
Date: Fri, 17 Sep 2021 22:45:46 +0530 [thread overview]
Message-ID: <1631898947-27433-4-git-send-email-pmaliset@codeaurora.org> (raw)
In-Reply-To: <1631898947-27433-1-git-send-email-pmaliset@codeaurora.org>
Enable PCIe controller and PHY for sc7280 IDP board.
Add specific NVMe GPIO entries for SKU1 and SKU2 support.
Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7280-idp.dts | 4 ++++
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 40 ++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7280-idp2.dts | 4 ++++
3 files changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 64fc22a..1a37b29 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -61,6 +61,10 @@
modem-init;
};
+&nvme_ldo_enable_pin {
+ pins = "gpio19";
+};
+
&pmk8350_vadc {
pmr735a_die_temp {
reg = <PMR735A_ADC7_DIE_TEMP>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 99f9ee5..ee00df0 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -199,6 +199,39 @@
modem-init;
};
+&pcie1 {
+ status = "okay";
+
+ perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie1_default_state &nvme_ldo_enable_pin>;
+};
+
+&pcie1_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l10c_0p8>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&pcie1_default_state {
+ reset-n {
+ pins = "gpio2";
+ function = "gpio";
+
+ drive-strength = <16>;
+ output-low;
+ bias-disable;
+ };
+
+ wake-n {
+ pins = "gpio3";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
&pmk8350_vadc {
pmk8350_die_temp {
reg = <PMK8350_ADC7_DIE_TEMP>;
@@ -343,3 +376,10 @@
bias-pull-up;
};
};
+
+&tlmm {
+ nvme_ldo_enable_pin: nvme_ldo_enable_pin {
+ function = "gpio";
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
index 1fc2add..dc0f0404 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
@@ -21,3 +21,7 @@
stdout-path = "serial0:115200n8";
};
};
+
+&nvme_ldo_enable_pin {
+ pins = "gpio51";
+};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2021-09-17 17:16 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-17 17:15 [PATCH v8 0/4] Add DT bindings and DT nodes for PCIe and PHY in SC7280 Prasad Malisetty
2021-09-17 17:15 ` [PATCH v8 1/4] dt-bindings: pci: qcom: Document PCIe bindings for SC7280 Prasad Malisetty
2021-09-17 17:15 ` [PATCH v8 2/4] arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes Prasad Malisetty
2021-09-17 17:15 ` Prasad Malisetty [this message]
2021-09-20 19:51 ` [PATCH v8 3/4] arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board Stephen Boyd
2021-09-28 13:36 ` Prasad Malisetty
2021-09-17 17:15 ` [PATCH v8 4/4] PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280 Prasad Malisetty
2021-09-20 19:53 ` Stephen Boyd
2021-09-23 10:01 ` Prasad Malisetty
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1631898947-27433-4-git-send-email-pmaliset@codeaurora.org \
--to=pmaliset@codeaurora.org \
--cc=agross@kernel.org \
--cc=bhelgaas@google.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mka@chromium.org \
--cc=robh+dt@kernel.org \
--cc=sallenki@codeaurora.org \
--cc=svarbanov@mm-sol.com \
--cc=swboyd@chromium.org \
--cc=vbadigan@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).