From: Lina Iyer <ilina@codeaurora.org>
To: swboyd@chromium.org, evgreen@chromium.org, marc.zyngier@arm.com,
linus.walleij@linaro.org
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
bjorn.andersson@linaro.org, mkshah@codeaurora.org,
linux-gpio@vger.kernel.org, rnayak@codeaurora.org,
Lina Iyer <ilina@codeaurora.org>
Subject: [PATCH RFC 03/14] drivers: irqchip: add PDC irqdomain for wakeup capable GPIOs
Date: Thu, 29 Aug 2019 12:11:52 -0600 [thread overview]
Message-ID: <20190829181203.2660-4-ilina@codeaurora.org> (raw)
In-Reply-To: <20190829181203.2660-1-ilina@codeaurora.org>
Introduce a new domain for wakeup capable GPIOs. The domain can be
requested using the bus token DOMAIN_BUS_WAKEUP. In the following
patches, we will specify PDC as the wakeup-parent for the TLMM GPIO
irqchip. Requesting a wakeup GPIO will setup the GPIO and the
corresponding PDC interrupt as its parent.
Co-developed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
---
drivers/irqchip/qcom-pdc.c | 104 ++++++++++++++++++++++++++++++++---
include/linux/soc/qcom/irq.h | 34 ++++++++++++
2 files changed, 129 insertions(+), 9 deletions(-)
create mode 100644 include/linux/soc/qcom/irq.h
diff --git a/drivers/irqchip/qcom-pdc.c b/drivers/irqchip/qcom-pdc.c
index 338fae604af5..ad1faf634bcf 100644
--- a/drivers/irqchip/qcom-pdc.c
+++ b/drivers/irqchip/qcom-pdc.c
@@ -13,12 +13,13 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/soc/qcom/irq.h>
#include <linux/spinlock.h>
-#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>
#define PDC_MAX_IRQS 126
+#define PDC_MAX_GPIO_IRQS 256
#define CLEAR_INTR(reg, intr) (reg & ~(1 << intr))
#define ENABLE_INTR(reg, intr) (reg | (1 << intr))
@@ -26,6 +27,8 @@
#define IRQ_ENABLE_BANK 0x10
#define IRQ_i_CFG 0x110
+#define PDC_NO_PARENT_IRQ ~0UL
+
struct pdc_pin_region {
u32 pin_base;
u32 parent_base;
@@ -65,23 +68,35 @@ static void pdc_enable_intr(struct irq_data *d, bool on)
static void qcom_pdc_gic_disable(struct irq_data *d)
{
+ if (d->hwirq == GPIO_NO_WAKE_IRQ)
+ return;
+
pdc_enable_intr(d, false);
irq_chip_disable_parent(d);
}
static void qcom_pdc_gic_enable(struct irq_data *d)
{
+ if (d->hwirq == GPIO_NO_WAKE_IRQ)
+ return;
+
pdc_enable_intr(d, true);
irq_chip_enable_parent(d);
}
static void qcom_pdc_gic_mask(struct irq_data *d)
{
+ if (d->hwirq == GPIO_NO_WAKE_IRQ)
+ return;
+
irq_chip_mask_parent(d);
}
static void qcom_pdc_gic_unmask(struct irq_data *d)
{
+ if (d->hwirq == GPIO_NO_WAKE_IRQ)
+ return;
+
irq_chip_unmask_parent(d);
}
@@ -124,6 +139,9 @@ static int qcom_pdc_gic_set_type(struct irq_data *d, unsigned int type)
int pin_out = d->hwirq;
enum pdc_irq_config_bits pdc_type;
+ if (pin_out == GPIO_NO_WAKE_IRQ)
+ return 0;
+
switch (type) {
case IRQ_TYPE_EDGE_RISING:
pdc_type = PDC_EDGE_RISING;
@@ -181,8 +199,7 @@ static irq_hw_number_t get_parent_hwirq(int pin)
return (region->parent_base + pin - region->pin_base);
}
- WARN_ON(1);
- return ~0UL;
+ return PDC_NO_PARENT_IRQ;
}
static int qcom_pdc_translate(struct irq_domain *d, struct irq_fwspec *fwspec,
@@ -211,17 +228,17 @@ static int qcom_pdc_alloc(struct irq_domain *domain, unsigned int virq,
ret = qcom_pdc_translate(domain, fwspec, &hwirq, &type);
if (ret)
- return -EINVAL;
-
- parent_hwirq = get_parent_hwirq(hwirq);
- if (parent_hwirq == ~0UL)
- return -EINVAL;
+ return ret;
ret = irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
&qcom_pdc_gic_chip, NULL);
if (ret)
return ret;
+ parent_hwirq = get_parent_hwirq(hwirq);
+ if (parent_hwirq == PDC_NO_PARENT_IRQ)
+ return 0;
+
if (type & IRQ_TYPE_EDGE_BOTH)
type = IRQ_TYPE_EDGE_RISING;
@@ -244,6 +261,60 @@ static const struct irq_domain_ops qcom_pdc_ops = {
.free = irq_domain_free_irqs_common,
};
+static int qcom_pdc_gpio_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *data)
+{
+ struct irq_fwspec *fwspec = data;
+ struct irq_fwspec parent_fwspec;
+ irq_hw_number_t hwirq, parent_hwirq;
+ unsigned int type;
+ int ret;
+
+ ret = qcom_pdc_translate(domain, fwspec, &hwirq, &type);
+ if (ret)
+ return ret;
+
+ ret = irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
+ &qcom_pdc_gic_chip, NULL);
+ if (ret)
+ return ret;
+
+ if (hwirq == GPIO_NO_WAKE_IRQ)
+ return 0;
+
+ parent_hwirq = get_parent_hwirq(hwirq);
+ if (parent_hwirq == PDC_NO_PARENT_IRQ)
+ return 0;
+
+ if (type & IRQ_TYPE_EDGE_BOTH)
+ type = IRQ_TYPE_EDGE_RISING;
+
+ if (type & IRQ_TYPE_LEVEL_MASK)
+ type = IRQ_TYPE_LEVEL_HIGH;
+
+ parent_fwspec.fwnode = domain->parent->fwnode;
+ parent_fwspec.param_count = 3;
+ parent_fwspec.param[0] = 0;
+ parent_fwspec.param[1] = parent_hwirq;
+ parent_fwspec.param[2] = type;
+
+ return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
+ &parent_fwspec);
+}
+
+static int qcom_pdc_gpio_domain_select(struct irq_domain *d,
+ struct irq_fwspec *fwspec,
+ enum irq_domain_bus_token bus_token)
+{
+ return (bus_token == DOMAIN_BUS_WAKEUP);
+}
+
+static const struct irq_domain_ops qcom_pdc_gpio_ops = {
+ .select = qcom_pdc_gpio_domain_select,
+ .alloc = qcom_pdc_gpio_alloc,
+ .free = irq_domain_free_irqs_common,
+};
+
static int pdc_setup_pin_mapping(struct device_node *np)
{
int ret, n;
@@ -282,7 +353,7 @@ static int pdc_setup_pin_mapping(struct device_node *np)
static int qcom_pdc_init(struct device_node *node, struct device_node *parent)
{
- struct irq_domain *parent_domain, *pdc_domain;
+ struct irq_domain *parent_domain, *pdc_domain, *pdc_gpio_domain;
int ret;
pdc_base = of_iomap(node, 0);
@@ -313,8 +384,23 @@ static int qcom_pdc_init(struct device_node *node, struct device_node *parent)
goto fail;
}
+ pdc_gpio_domain = irq_domain_create_hierarchy(parent_domain,
+ IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP,
+ PDC_MAX_GPIO_IRQS,
+ of_fwnode_handle(node),
+ &qcom_pdc_gpio_ops, NULL);
+ if (!pdc_gpio_domain) {
+ pr_err("%pOF: GIC domain add failed for GPIO domain\n", node);
+ ret = -ENOMEM;
+ goto remove;
+ }
+
+ irq_domain_update_bus_token(pdc_gpio_domain, DOMAIN_BUS_WAKEUP);
+
return 0;
+remove:
+ irq_domain_remove(pdc_domain);
fail:
kfree(pdc_region);
iounmap(pdc_base);
diff --git a/include/linux/soc/qcom/irq.h b/include/linux/soc/qcom/irq.h
new file mode 100644
index 000000000000..73239917dc38
--- /dev/null
+++ b/include/linux/soc/qcom/irq.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __QCOM_IRQ_H
+#define __QCOM_IRQ_H
+
+#include <linux/irqdomain.h>
+
+#define GPIO_NO_WAKE_IRQ ~0U
+
+/**
+ * QCOM specific IRQ domain flags that distinguishes the handling of wakeup
+ * capable interrupts by different interrupt controllers.
+ *
+ * IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP: Line must be masked at TLMM and the
+ * interrupt configuration is done at PDC
+ * IRQ_DOMAIN_FLAG_QCOM_MPM_WAKEUP: Interrupt configuration is handled at TLMM
+ */
+#define IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP (1 << 17)
+#define IRQ_DOMAIN_FLAG_QCOM_MPM_WAKEUP (1 << 18)
+
+/**
+ * irq_domain_qcom_handle_wakeup: Return if the domain handles interrupt
+ * configuration
+ * @parent: irq domain
+ *
+ * This QCOM specific irq domain call returns if the interrupt controller
+ * requires the interrupt be masked at the child interrupt controller.
+ */
+static inline bool irq_domain_qcom_handle_wakeup(struct irq_domain *parent)
+{
+ return (parent->flags & IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP);
+}
+
+#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2019-08-29 18:31 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-29 18:11 [PATCH RFC 00/14] qcom: support wakeup capable GPIOs Lina Iyer
2019-08-29 18:11 ` [PATCH RFC 01/14] irqdomain: add bus token DOMAIN_BUS_WAKEUP Lina Iyer
2019-08-29 18:11 ` [PATCH RFC 02/14] drivers: irqchip: pdc: Do not toggle IRQ_ENABLE during mask/unmask Lina Iyer
2019-09-06 0:39 ` Stephen Boyd
2019-09-11 16:15 ` Lina Iyer
2019-09-20 22:22 ` Stephen Boyd
2019-09-20 22:31 ` Lina Iyer
2019-08-29 18:11 ` Lina Iyer [this message]
2019-08-30 14:50 ` [PATCH RFC 03/14] drivers: irqchip: add PDC irqdomain for wakeup capable GPIOs Marc Zyngier
2019-08-30 15:58 ` Lina Iyer
2019-09-02 8:21 ` Marc Zyngier
2019-09-03 22:51 ` Stephen Boyd
2019-08-29 18:11 ` [PATCH RFC 04/14] of: irq: document properties for wakeup interrupt parent Lina Iyer
2019-09-02 13:38 ` Rob Herring
2019-08-29 18:11 ` [PATCH RFC 05/14] dt-bindings/interrupt-controller: pdc: add SPI config register Lina Iyer
2019-09-02 13:38 ` Rob Herring
2019-09-02 13:53 ` Marc Zyngier
2019-09-03 17:07 ` Lina Iyer
2019-09-06 0:03 ` Stephen Boyd
2019-09-13 19:53 ` Lina Iyer
2019-09-17 21:50 ` Lina Iyer
2019-09-20 22:20 ` Stephen Boyd
2019-09-23 6:11 ` Sibi Sankar
[not found] ` <CACRpkdaReFzjb_hcDbQwqMX+whzscLpeZpJPHKqOo+9tANzemA@mail.gmail.com>
2019-09-11 15:19 ` Lina Iyer
2019-08-29 18:11 ` [PATCH RFC 06/14] drivers: irqchip: pdc: additionally set type in SPI config registers Lina Iyer
2019-09-06 0:22 ` Stephen Boyd
2019-08-29 18:11 ` [PATCH RFC 07/14] genirq: Introduce irq_chip_get/set_parent_state calls Lina Iyer
2019-09-06 0:35 ` Stephen Boyd
2019-08-29 18:11 ` [PATCH RFC 08/14] drivers: irqchip: pdc: Add irqchip set/get state calls Lina Iyer
2019-09-06 0:09 ` Stephen Boyd
2019-08-29 18:11 ` [PATCH RFC 09/14] drivers: pinctrl: msm: fix use of deprecated gpiolib APIs Lina Iyer
2019-09-06 0:11 ` Stephen Boyd
2019-09-11 10:19 ` Linus Walleij
2019-09-11 16:16 ` Lina Iyer
2019-08-29 18:11 ` [PATCH RFC 10/14] drivers: pinctrl: msm: setup GPIO chip in hierarchy Lina Iyer
2019-08-29 18:12 ` [PATCH RFC 11/14] drivers: pinctrl: sdm845: add PDC wakeup interrupt map for GPIOs Lina Iyer
2019-09-06 0:24 ` Stephen Boyd
2019-08-29 18:12 ` [PATCH RFC 12/14] arm64: dts: qcom: add PDC interrupt controller for SDM845 Lina Iyer
2019-09-09 11:26 ` Maulik Shah
2019-08-29 18:12 ` [PATCH RFC 13/14] arm64: dts: qcom: setup PDC as the wakeup parent for TLMM on SDM845 Lina Iyer
2019-08-29 18:12 ` [PATCH RFC 14/14] arm64: defconfig: enable PDC interrupt controller for Qualcomm SDM845 Lina Iyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190829181203.2660-4-ilina@codeaurora.org \
--to=ilina@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=evgreen@chromium.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mkshah@codeaurora.org \
--cc=rnayak@codeaurora.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).