[PATCH AUTOSEL 5.6 041/129] drivers: thermal: tsens: Release device in success path

[PATCH AUTOSEL 5.6 041/129] drivers: thermal: tsens: Release device in success path

[Sasha Levin]

From: Amit Kucheria <amit.kucheria@linaro.org>

[ Upstream commit f22a3bf0d2225fba438c46a25d3ab8823585a5e0 ]

We don't currently call put_device in case of successfully initialising
the device. So we hold the reference and keep the device pinned forever.

Allow control to fall through so we can use same code for success and
error paths to put_device.

As a part of this fixup, change devm_ioremap_resource to act on the same
device pointer as that used to allocate regmap memory. That ensures that
we are free to release op->dev after examining its resources.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/d3996667e9f976bb30e97e301585cb1023be422e.1584015867.git.amit.kucheria@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/qcom/tsens-common.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index c8d57ee0a5bb2..2cc276cdfcdb1 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -602,7 +602,7 @@ int __init init_common(struct tsens_priv *priv)
 		/* DT with separate SROT and TM address space */
 		priv->tm_offset = 0;
 		res = platform_get_resource(op, IORESOURCE_MEM, 1);
-		srot_base = devm_ioremap_resource(&op->dev, res);
+		srot_base = devm_ioremap_resource(dev, res);
 		if (IS_ERR(srot_base)) {
 			ret = PTR_ERR(srot_base);
 			goto err_put_device;
@@ -620,7 +620,7 @@ int __init init_common(struct tsens_priv *priv)
 	}
 
 	res = platform_get_resource(op, IORESOURCE_MEM, 0);
-	tm_base = devm_ioremap_resource(&op->dev, res);
+	tm_base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(tm_base)) {
 		ret = PTR_ERR(tm_base);
 		goto err_put_device;
@@ -687,8 +687,6 @@ int __init init_common(struct tsens_priv *priv)
 	tsens_enable_irq(priv);
 	tsens_debug_init(op);
 
-	return 0;
-
 err_put_device:
 	put_device(&op->dev);
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 5.6 064/129] dt-bindings: thermal: tsens: Fix nvmem-cell-names schema

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit b9589def9f9af93d9d4c5969c9a6c166f070e36e ]

There's a typo 'nvmem-cells-names' in the schema which means the correct
'nvmem-cell-names' in the examples are not checked. The possible values
are wrong too both in that the 2nd entry is not specified correctly and the
values are just wrong based on the dts files in the kernel.

Fixes: a877e768f655 ("dt-bindings: thermal: tsens: Convert over to a yaml schema")
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/thermal/qcom-tsens.yaml          | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index eef13b9446a87..a4df53228122a 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -53,13 +53,12 @@ properties:
     description:
       Reference to an nvmem node for the calibration data
 
-  nvmem-cells-names:
+  nvmem-cell-names:
     minItems: 1
     maxItems: 2
     items:
-      - enum:
-        - caldata
-        - calsel
+      - const: calib
+      - const: calib_sel
 
   "#qcom,sensors":
     allOf:
@@ -125,7 +124,7 @@ examples:
                  <0x4a8000 0x1000>; /* SROT */
 
            nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
-           nvmem-cell-names = "caldata", "calsel";
+           nvmem-cell-names = "calib", "calib_sel";
 
            interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-names = "uplow";
-- 
2.20.1