From: Roja Rani Yarubandi <rojay@codeaurora.org>
To: ulf.hansson@linaro.org, robh+dt@kernel.org,
bjorn.andersson@linaro.org, wsa@kernel.org
Cc: swboyd@chromium.org, dianders@chromium.org,
saiprakash.ranjan@codeaurora.org, mka@chromium.org,
akashast@codeaurora.org, msavaliy@qti.qualcomm.com,
parashar@codeaurora.org, rnayak@codeaurora.org,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
agross@kernel.org, linux-i2c@vger.kernel.org,
Roja Rani Yarubandi <rojay@codeaurora.org>
Subject: [PATCH 2/3] arm64: dts: sc7180: Add assigned-performance-states for i2c
Date: Thu, 24 Dec 2020 16:42:09 +0530 [thread overview]
Message-ID: <20201224111210.1214-3-rojay@codeaurora.org> (raw)
In-Reply-To: <20201224111210.1214-1-rojay@codeaurora.org>
qup-i2c devices on sc7180 are clocked with a fixed clock (19.2 MHz).
Though qup-i2c does not support DVFS, it still needs to vote for a
performance state on 'CX' to satisfy the 19.2 MHz clock frequency
requirement.
Use 'assigned-performance-states' to pass this information from
device tree, and also add the power-domains property to specify
the CX power-domain.
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 22b832fc62e3..70d74215ba8b 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -782,6 +782,8 @@ i2c0: i2c@880000 {
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ power-domains = <&rpmhpd SC7180_CX>;
+ assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
status = "disabled";
};
@@ -834,6 +836,8 @@ i2c1: i2c@884000 {
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ power-domains = <&rpmhpd SC7180_CX>;
+ assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
status = "disabled";
};
@@ -886,6 +890,8 @@ i2c2: i2c@888000 {
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ power-domains = <&rpmhpd SC7180_CX>;
+ assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
status = "disabled";
};
@@ -920,6 +926,8 @@ i2c3: i2c@88c000 {
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ power-domains = <&rpmhpd SC7180_CX>;
+ assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
status = "disabled";
};
@@ -972,6 +980,8 @@ i2c4: i2c@890000 {
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ power-domains = <&rpmhpd SC7180_CX>;
+ assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
status = "disabled";
};
@@ -1006,6 +1016,8 @@ i2c5: i2c@894000 {
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ power-domains = <&rpmhpd SC7180_CX>;
+ assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
status = "disabled";
};
@@ -1073,6 +1085,8 @@ i2c6: i2c@a80000 {
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ power-domains = <&rpmhpd SC7180_CX>;
+ assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
status = "disabled";
};
@@ -1125,6 +1139,8 @@ i2c7: i2c@a84000 {
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ power-domains = <&rpmhpd SC7180_CX>;
+ assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
status = "disabled";
};
@@ -1159,6 +1175,8 @@ i2c8: i2c@a88000 {
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ power-domains = <&rpmhpd SC7180_CX>;
+ assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
status = "disabled";
};
@@ -1211,6 +1229,8 @@ i2c9: i2c@a8c000 {
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ power-domains = <&rpmhpd SC7180_CX>;
+ assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
status = "disabled";
};
@@ -1245,6 +1265,8 @@ i2c10: i2c@a90000 {
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ power-domains = <&rpmhpd SC7180_CX>;
+ assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
status = "disabled";
};
@@ -1297,6 +1319,8 @@ i2c11: i2c@a94000 {
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ power-domains = <&rpmhpd SC7180_CX>;
+ assigned-performance-states = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
status = "disabled";
};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2020-12-24 11:14 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-24 11:12 [PATCH 0/3] Add support for assigned-performance-states for geni i2c driver Roja Rani Yarubandi
2020-12-24 11:12 ` [PATCH 1/3] dt-bindings: power: Introduce 'assigned-performance-states' property Roja Rani Yarubandi
2020-12-26 0:16 ` Rob Herring
2020-12-27 16:56 ` Rob Herring
2020-12-31 15:49 ` Rob Herring
2021-01-08 9:39 ` Ulf Hansson
2021-01-15 16:15 ` Bjorn Andersson
2021-01-18 5:39 ` Rajendra Nayak
2020-12-24 11:12 ` Roja Rani Yarubandi [this message]
2020-12-24 11:12 ` [PATCH 3/3] i2c: i2c-qcom-geni: Add support for 'assigned-performance-states' Roja Rani Yarubandi
2021-01-15 14:43 ` Bjorn Andersson
2021-01-18 5:36 ` Rajendra Nayak
2021-01-19 11:02 ` Ulf Hansson
2021-01-19 11:05 ` Viresh Kumar
2021-01-20 13:31 ` Ulf Hansson
2021-02-12 9:21 ` rojay
2021-04-01 6:39 ` rojay
2021-04-29 7:02 ` rojay
2021-04-29 7:50 ` Viresh Kumar
2021-05-04 7:17 ` Rajendra Nayak
2021-05-07 9:06 ` Ulf Hansson
2021-05-10 6:37 ` Rajendra Nayak
2021-05-12 13:50 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201224111210.1214-3-rojay@codeaurora.org \
--to=rojay@codeaurora.org \
--cc=agross@kernel.org \
--cc=akashast@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mka@chromium.org \
--cc=msavaliy@qti.qualcomm.com \
--cc=parashar@codeaurora.org \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=swboyd@chromium.org \
--cc=ulf.hansson@linaro.org \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).