linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: balbi@kernel.org, gregkh@linuxfoundation.org, agross@kernel.org,
	bjorn.andersson@linaro.org, linux-usb@vger.kernel.org,
	linux-arm-msm@vger.kernel.org
Cc: wcheng@codeaurora.org, bryan.odonoghue@linaro.org
Subject: [PATCH 2/2] usb: dwc3: dwc3-qcom: Fix typo in the dwc3 vbus override API
Date: Tue, 29 Jun 2021 15:44:49 +0100	[thread overview]
Message-ID: <20210629144449.2550737-3-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20210629144449.2550737-1-bryan.odonoghue@linaro.org>

From: Wesley Cheng <wcheng@codeaurora.org>

There was an extra character in the dwc3_qcom_vbus_override_enable()
function.  Removed the extra character.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/usb/dwc3/dwc3-qcom.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 4491704503ab..541e2626294a 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -120,7 +120,7 @@ static inline void dwc3_qcom_clrbits(void __iomem *base, u32 offset, u32 val)
 	readl(base + offset);
 }
 
-static void dwc3_qcom_vbus_overrride_enable(struct dwc3_qcom *qcom, bool enable)
+static void dwc3_qcom_vbus_override_enable(struct dwc3_qcom *qcom, bool enable)
 {
 	if (enable) {
 		dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL,
@@ -141,7 +141,7 @@ static int dwc3_qcom_vbus_notifier(struct notifier_block *nb,
 	struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, vbus_nb);
 
 	/* enable vbus override for device mode */
-	dwc3_qcom_vbus_overrride_enable(qcom, event);
+	dwc3_qcom_vbus_override_enable(qcom, event);
 	qcom->mode = event ? USB_DR_MODE_PERIPHERAL : USB_DR_MODE_HOST;
 
 	return NOTIFY_DONE;
@@ -153,7 +153,7 @@ static int dwc3_qcom_host_notifier(struct notifier_block *nb,
 	struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, host_nb);
 
 	/* disable vbus override in host mode */
-	dwc3_qcom_vbus_overrride_enable(qcom, !event);
+	dwc3_qcom_vbus_override_enable(qcom, !event);
 	qcom->mode = event ? USB_DR_MODE_HOST : USB_DR_MODE_PERIPHERAL;
 
 	return NOTIFY_DONE;
@@ -329,7 +329,7 @@ static int dwc3_qcom_usb_role_switch_set(struct usb_role_switch *sw,
 
 	qcom->mode = (role == USB_ROLE_HOST) ? USB_DR_MODE_HOST :
 					       USB_DR_MODE_PERIPHERAL;
-	dwc3_qcom_vbus_overrride_enable(qcom, enable);
+	dwc3_qcom_vbus_override_enable(qcom, enable);
 	return 0;
 }
 
@@ -917,7 +917,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 
 	/* enable vbus override for device mode */
 	if (qcom->mode == USB_DR_MODE_PERIPHERAL)
-		dwc3_qcom_vbus_overrride_enable(qcom, true);
+		dwc3_qcom_vbus_override_enable(qcom, true);
 
 	if (dwc3_qcom_find_usb_connector(pdev)) {
 		ret = dwc3_qcom_setup_role_switch(qcom);
-- 
2.30.1


  parent reply	other threads:[~2021-06-29 14:43 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-29 14:44 [PATCH 0/2] dwc3-qcom: Prepare the ground for pm8150b tcpm Bryan O'Donoghue
2021-06-29 14:44 ` [PATCH 1/2] usb: dwc3: dwc3-qcom: Find USB connector and register role switch Bryan O'Donoghue
2021-06-29 15:48   ` Bjorn Andersson
2021-06-29 19:23     ` Bryan O'Donoghue
2021-06-29 20:02       ` Jack Pham
2021-06-29 20:16         ` Bryan O'Donoghue
2021-06-29 20:30         ` Bjorn Andersson
2021-06-29 21:57           ` Bryan O'Donoghue
2021-06-30  2:21             ` Bryan O'Donoghue
2021-07-01  1:12               ` Jack Pham
2021-07-01  2:08                 ` Bryan O'Donoghue
2021-06-29 20:18       ` Bjorn Andersson
2021-06-29 14:44 ` Bryan O'Donoghue [this message]
2021-06-29 15:51   ` [PATCH 2/2] usb: dwc3: dwc3-qcom: Fix typo in the dwc3 vbus override API Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210629144449.2550737-3-bryan.odonoghue@linaro.org \
    --to=bryan.odonoghue@linaro.org \
    --cc=agross@kernel.org \
    --cc=balbi@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=wcheng@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).