[PATCH v2 3/6] clk: qcom: Add lpass clock controller driver for SC8280XP

[Srinivas Kandagatla <srinivas.kandagatla@linaro.org>]

Add support for the lpass clock controller found on SC8280XP based devices.
This would allow lpass peripheral loader drivers to control the clocks and
bring the subsystems out of reset.

Currently this patch only supports resets as the Q6DSP is in control of
LPASS IP which manages most of the clocks via Q6PRM service on GPR rpmsg
channel.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/clk/qcom/Kconfig            |  8 ++++
 drivers/clk/qcom/Makefile           |  1 +
 drivers/clk/qcom/lpasscc-sc8280xp.c | 63 +++++++++++++++++++++++++++++
 3 files changed, 72 insertions(+)
 create mode 100644 drivers/clk/qcom/lpasscc-sc8280xp.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 85869e7a9f16..e25993abb519 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -523,6 +523,14 @@ config SC_LPASSCC_7280
 	  Say Y if you want to use the LPASS branch clocks of the LPASS clock
 	  controller to reset the LPASS subsystem.
 
+config SC_LPASSCC_8280XP
+	tristate "SC8280 Low Power Audio Subsystem (LPASS) Clock Controller"
+	select SC_GCC_8280XP
+	help
+	  Support for the LPASS clock controller on SC8280XP devices.
+	  Say Y if you want to use the LPASS branch clocks of the LPASS clock
+	  controller to reset the LPASS subsystem.
+
 config SC_LPASS_CORECC_7180
 	tristate "SC7180 LPASS Core Clock Controller"
 	select SC_GCC_7180
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 9ff4c373ad95..1d420e112fae 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -81,6 +81,7 @@ obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o
 obj-$(CONFIG_SC_GPUCC_7280) += gpucc-sc7280.o
 obj-$(CONFIG_SC_GPUCC_8280XP) += gpucc-sc8280xp.o
 obj-$(CONFIG_SC_LPASSCC_7280) += lpasscc-sc7280.o
+obj-$(CONFIG_SC_LPASSCC_8280XP) += lpasscc-sc8280xp.o
 obj-$(CONFIG_SC_LPASS_CORECC_7180) += lpasscorecc-sc7180.o
 obj-$(CONFIG_SC_LPASS_CORECC_7280) += lpasscorecc-sc7280.o lpassaudiocc-sc7280.o
 obj-$(CONFIG_SC_MSS_7180) += mss-sc7180.o
diff --git a/drivers/clk/qcom/lpasscc-sc8280xp.c b/drivers/clk/qcom/lpasscc-sc8280xp.c
new file mode 100644
index 000000000000..547f15d41a9d
--- /dev/null
+++ b/drivers/clk/qcom/lpasscc-sc8280xp.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <dt-bindings/clock/qcom,lpasscc-sc8280xp.h>
+
+#include "common.h"
+#include "reset.h"
+
+static const struct qcom_reset_map lpasscc_sc8280xp_resets[] = {
+	[LPASS_AUDIO_SWR_TX_CGCR] = { 0xc010, 1 },
+};
+
+static struct regmap_config lpasscc_sc8280xp_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.name = "lpass-tcsr",
+	.max_register = 0x12000,
+};
+
+static const struct qcom_cc_desc lpasscc_reset_sc8280xp_desc = {
+	.config = &lpasscc_sc8280xp_regmap_config,
+	.resets = lpasscc_sc8280xp_resets,
+	.num_resets = ARRAY_SIZE(lpasscc_sc8280xp_resets),
+};
+
+static const struct of_device_id lpasscc_sc8280xp_match_table[] = {
+	{
+		.compatible = "qcom,sc8280xp-lpasscc",
+		.data = &lpasscc_reset_sc8280xp_desc,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpasscc_sc8280xp_match_table);
+
+static int lpasscc_sc8280xp_probe(struct platform_device *pdev)
+{
+	const struct qcom_cc_desc *desc = of_device_get_match_data(&pdev->dev);
+
+	return qcom_cc_probe_by_index(pdev, 0, desc);
+}
+
+static struct platform_driver lpasscc_sc8280xp_driver = {
+	.probe = lpasscc_sc8280xp_probe,
+	.driver = {
+		.name = "lpasscc-sc8280xp",
+		.of_match_table = lpasscc_sc8280xp_match_table,
+	},
+};
+
+module_platform_driver(lpasscc_sc8280xp_driver);
+
+MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org>");
+MODULE_DESCRIPTION("QTI LPASSCC SC8280XP Driver");
+MODULE_LICENSE("GPL");
-- 
2.21.0