messages from 2019-10-29 19:42:13 to 2019-11-04 16:38:45 UTC [more...]
[PATCH v1 0/7] PCI: dt: Remove magic numbers for legacy PCI IRQ interrupts
2019-11-04 16:38 UTC
[PATCHv7 0/3] QCOM smmu-500 wait-for-safe handling for sdm845
2019-11-04 16:23 UTC (13+ messages)
` [PATCHv7 1/3] firmware: qcom_scm-64: Add atomic version of qcom_scm_call
` [PATCHv7 2/3] firmware/qcom_scm: Add scm call to handle smmu errata
[PATCH] slimbus: qcom: add missed clk_disable_unprepare in remove
2019-11-04 16:16 UTC
[PATCH] pinctrl: qcom: sc7180: Add missing tile info in SDC_QDSD_PINGROUP/UFS_RESET
2019-11-04 15:04 UTC (2+ messages)
[PATCH] PCI: qcom: Fix the fixup of PCI_VENDOR_ID_QCOM
2019-11-04 13:00 UTC (3+ messages)
[PATCH 0/1] Add QUP SE instances configuration
2019-11-04 10:32 UTC (3+ messages)
` [PATCH 1/1] arm64: dts: sc7180: Add qupv3_0 and qupv3_1
[PATCH v2 0/2] PCI: qcom: Add support for SDM845 PCIe
2019-11-04 9:41 UTC (5+ messages)
` [PATCH v2 1/2] dt-bindings: "
` [PATCH v2 2/2] PCI: qcom: Add support for SDM845 PCIe controller
[PATCH 00/11] arm64: dts: qcom: msm8996: Introduce IFC6640
2019-11-04 9:27 UTC (4+ messages)
[PATCH v2 0/5] phy: qcom-qmp: Add SDM845 QMP and QHP PHYs
2019-11-04 9:22 UTC (9+ messages)
` [PATCH v2 1/5] dt-bindings: phy-qcom-qmp: Add SDM845 PCIe to binding
` [PATCH v2 2/5] phy: qcom-qmp: Increase PHY ready timeout
` [PATCH v2 3/5] phy: qcom: qmp: Use power_on/off ops for PCIe
` [PATCH v2 4/5] phy: qcom: qmp: Add SDM845 PCIe QMP PHY support
` [PATCH v2 5/5] phy: qcom: qmp: Add SDM845 QHP PCIe PHY
[PATCH V6 0/8] backlight: qcom-wled: Support for QCOM wled driver
2019-11-04 9:09 UTC (5+ messages)
` [PATCH V6 2/8] backlight: qcom-wled: restructure the qcom-wled bindings
[PATCH v3 00/11] Add device tree support for sc7180
2019-11-04 7:10 UTC (30+ messages)
` [PATCH v3 01/11] dt-bindings: qcom: Add SC7180 bindings
` [PATCH v3 02/11] arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 soc
` [PATCH v3 03/11] dt-bindings: arm-smmu: update binding for qcom sc7180 SoC
` [PATCH v3 07/11] arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device
` [PATCH v3 08/11] arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals
` [PATCH v3 11/11] arm64: dts: qcom: sc7180: Add pdc interrupt controller
[PATCH] of-thermal: Disable polling when interrupt property is found in DT
2019-11-04 6:26 UTC (3+ messages)
[PATCH][next][V2] drivers: thermal: tsens: fix potential integer overflow on multiply
2019-11-04 6:15 UTC (2+ messages)
[PATCH] MAINTAINERS: Add myself as co-maintainer for QCOM
2019-11-04 5:50 UTC
[PATCH v2 2/7] scsi: ufs-qcom: Add reset control support for host controller
2019-11-04 1:35 UTC
[PATCH -next 00/30] pinctrl: use devm_platform_ioremap_resource() to simplify code
2019-11-04 1:17 UTC (4+ messages)
` [PATCH -next 01/30] pinctrl: pxa25x: "
[PATCH v2] tty: serial: msm_serial: Fix flow control
2019-11-03 21:51 UTC (3+ messages)
[PATCH] i2c: qcom-geni: fix spelling mistake "unepxected" -> "unexpected"
2019-11-03 21:22 UTC
[PATCH 0/3] arm64: dts: qcom: sdm845: Add PCIe nodes
2019-11-03 8:27 UTC (5+ messages)
` [PATCH 1/3] arm64: dts: qcom: sdm845: Add first PCIe controller and PHY
` [PATCH 2/3] arm64: dts: qcom: sdm845: Add second PCIe PHY and controller
` [PATCH 3/3] arm64: dts: qcom: db845c: Enable PCIe controllers
[PATCH] arm64: dts: qcom: db845c: Enable LVS 1 and 2
2019-11-03 8:14 UTC (2+ messages)
[PATCH v4 0/7] DRM/MSM: Add support for MSM8956 and Adreno 510
2019-11-02 16:54 UTC (10+ messages)
` [PATCH v4 1/7] drm/msm/mdp5: Add optional TBU and TBU_RT clocks
` [PATCH v4 2/7] dt-bindings: msm/mdp5: Document "
` [PATCH v4 3/7] drm/msm/mdp5: Add configuration for msm8x76
` [PATCH v4 4/7] drm/msm/dsi: Add configuration for 28nm PLL on family B
` [PATCH v4 5/7] dt-bindings: msm/dsi: Add 28nm PLL for family B compatible
` [PATCH v4 6/7] drm/msm/dsi: Add configuration for 8x76
` [PATCH v4 7/7] drm/msm/adreno: Add support for Adreno 510 GPU
[PATCH v1 2/6] scsi: ufs-qcom: Add reset control support for host controller
2019-11-02 5:03 UTC
[PATCH v7 00/15] thermal: qcom: tsens: Add interrupt support
2019-11-01 22:53 UTC (17+ messages)
` [PATCH v7 01/15] drivers: thermal: tsens: Get rid of id field in tsens_sensor
` [PATCH v7 02/15] drivers: thermal: tsens: Simplify code flow in tsens_probe
` [PATCH v7 03/15] drivers: thermal: tsens: Add __func__ identifier to debug statements
` [PATCH v7 04/15] drivers: thermal: tsens: Add debugfs support
` [PATCH v7 05/15] arm: dts: msm8974: thermal: Add thermal zones for each sensor
` [PATCH v7 06/15] arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors
` [PATCH v7 07/15] dt-bindings: thermal: tsens: Convert over to a yaml schema
` [PATCH v7 08/15] arm64: dts: sdm845: thermal: Add interrupt support
` [PATCH v7 09/15] arm64: dts: msm8996: "
` [PATCH v7 10/15] arm64: dts: msm8998: "
` [PATCH v7 11/15] arm64: dts: qcs404: "
` [PATCH v7 12/15] arm: dts: msm8974: "
` [PATCH v7 13/15] arm64: dts: msm8916: "
` [PATCH v7 14/15] drivers: thermal: tsens: Create function to return sign-extended temperature
` [PATCH v7 15/15] drivers: thermal: tsens: Add interrupt support
[PATCH] iommu/arm-smmu: avoid pathological RPM behaviour for unmaps
2019-11-01 16:28 UTC (2+ messages)
[PATCH v2 0/3] interconnect: Add basic tracepoints
2019-11-01 13:00 UTC (4+ messages)
` [PATCH v2 1/3] interconnect: Move internal structs into a separate file
` [PATCH v2 2/3] interconnect: Add a name to struct icc_path
` [PATCH v2 3/3] interconnect: Add basic tracepoints
[PATCH 0/1] Add device node support for TSENS
2019-11-01 12:08 UTC (2+ messages)
` [PATCH 1/1] arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180
[PATCH V1] mfd: qcom-spmi-pmic: Add support for pm6150 and pm6150l
2019-11-01 6:59 UTC
[PATCH V10 0/8] backlight: qcom-wled: Support for QCOM wled driver
2019-11-01 6:27 UTC (9+ messages)
` [PATCH V10 1/8] backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
` [PATCH V10 2/8] backlight: qcom-wled: restructure the qcom-wled bindings
` [PATCH V10 3/8] backlight: qcom-wled: Add new properties for PMI8998
` [PATCH V10 4/8] backlight: qcom-wled: Rename PM8941* to WLED3
` [PATCH V10 5/8] backlight: qcom-wled: Restructure the driver for WLED3
` [PATCH V10 6/8] backlight: qcom-wled: Add support for WLED4 peripheral
` [PATCH V10 7/8] backlight: qcom-wled: add support for short circuit handling
` [PATCH V10 8/8] backlight: qcom-wled: Add auto string detection logic
[PATCH V9 0/6] backlight: qcom-wled: Support for QCOM wled driver
2019-11-01 5:42 UTC (4+ messages)
` [PATCH V9 1/6] backlight: qcom-wled: Add new properties for PMI8998
arm64: dts: qcom: sc7180: Add cpuidle low power states
2019-11-01 5:20 UTC (4+ messages)
` [PATCH] "
[PATCH 0/2] Support for MSM8998 mss
2019-11-01 2:45 UTC (3+ messages)
` [PATCH 1/2] dt-bindings: remoteproc: qcom: Add Q6v5 Modem PIL binding for MSM8998
` [PATCH 2/2] remoteproc: qcom_q6v5_mss: Add support "
[PATCH 0/2] remoteproc: mss: Improve memory assignment
2019-10-31 22:03 UTC (10+ messages)
` [PATCH 1/2] remoteproc: qcom_q6v5_mss: Don't reassign mpss region on shutdown
` [PATCH 2/2] remoteproc: qcom_q6v5_mss: Validate each segment during loading
[PATCH v2 0/5] MSM8976/56 Sony Xperia Loire (X/XCompact) smartphones
2019-10-31 19:58 UTC (7+ messages)
` [PATCH v2 1/5] dt-bindings: iio: spmi-vadc: Add definitions for USB DP/DM VADCs
` [PATCH v2 2/5] arm64: dts: pm8004: Add SPMI regulator and add phandles to lsids
` [PATCH v2 3/5] arm64: dts: qcom: Add configuration for PM8950 and PMI8950 peripherals
` [PATCH v2 4/5] arm64: dts: qcom: Add MSM8976 SoC support dts files
` [PATCH v2 5/5] arm64: dts: qcom: Add Sony Xperia (Loire) X and X Compact support
[PATCH v5 0/3] MSM8998 GPUCC Support
2019-10-31 18:58 UTC (4+ messages)
` [PATCH v5 1/3] clk: qcom: Allow constant ratio freq tables for rcg
` [PATCH v5 2/3] clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver
` [PATCH v5 3/3] arm64: dts: qcom: msm8998: Add gpucc node
[PATCH v1 0/2] interconnect: Move qcom interconnect drivers to core_initcall
2019-10-31 18:30 UTC (3+ messages)
` [PATCH v1 1/2] interconnect: Move "
[PATCH v4 0/5] Add Global Clock controller (GCC) driver for SC7180
2019-10-31 17:41 UTC (5+ messages)
` [PATCH v4 5/5] clk: qcom: "
[PATCH v2] arm64: cpufeature: Enable Qualcomm Falkor errata 1009 for Kryo
2019-10-31 14:17 UTC (3+ messages)
[PATCH 0/1] Add USB related nodes for SC7180
2019-10-31 13:49 UTC (2+ messages)
` [PATCH 1/1] arm64: dts: qcom: sc7180: Add USB related nodes
[PATCH v1 0/7] Add GPU & Video Clock controller driver for SC7180
2019-10-31 12:21 UTC (8+ messages)
` [PATCH v1 1/7] clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration
` [PATCH v1 2/7] dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings
` [PATCH v1 3/7] dt-bindings: clock: Introduce QCOM Graphics "
` [PATCH v1 4/7] clk: qcom: Add graphics clock controller driver for SC7180
` [PATCH v1 5/7] dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings
` [PATCH v1 6/7] dt-bindings: clock: Introduce QCOM Video "
` [PATCH v1 7/7] clk: qcom: Add video clock controller driver for SC7180
[PATCH 0/2] RPM clocks for MSM8976/56
2019-10-31 11:29 UTC (3+ messages)
` [PATCH 1/2] clk: qcom: smd: Add support for MSM8976 rpm clocks
` [PATCH 2/2] dt-bindings: clock: rpmcc: Document msm8976 compatible
[PATCH 0/4] SPMI GPIOs and MPPs on PM/PMI8950
2019-10-31 10:35 UTC (5+ messages)
` [PATCH 1/4] pinctrl: qcom: spmi-gpio: Add PM/PMI8950 compatibility
` [PATCH 2/4] dt-bindings: pinctrl: qcom-pmic-gpio: Add support for PM/PMI8950
` [PATCH 3/4] pinctrl: qcom: spmi-mpp: Add PM/PMI8950 compatible strings
` [PATCH 4/4] dt-bindings: pinctrl: qcom-pmic-mpp: Add support for PM/PMI8950
[PATCH v5 0/6] Initialise thermal framework and cpufreq earlier during boot
2019-10-31 6:00 UTC (4+ messages)
[PATCH 0/2] Add QUSB2 PHY support for SC7180
2019-10-31 5:38 UTC (3+ messages)
` [PATCH 1/2] phy: qcom-qusb2: "
` [PATCH 2/2] dt-bindings: phy-qcom-qusb2: Add SC7180 QUSB2 phy support
[PATCH v10 0/3] Add MSM8916 interconnect provider driver
2019-10-30 15:39 UTC (4+ messages)
` [PATCH v10 1/3] dt-bindings: interconnect: Add Qualcomm MSM8916 DT bindings
` [PATCH v10 2/3] interconnect: qcom: Add MSM8916 interconnect provider driver
` [PATCH v10 3/3] arm64: dts: msm8916: Add interconnect provider DT nodes
[PATCH v3 0/7]Introduce Power domain based warming device driver
2019-10-30 14:27 UTC (14+ messages)
` [PATCH v3 6/7] dt-bindings: soc: qcom: Extend RPMh power controller binding to describe thermal warming device
` [PATCH v3 7/7] arm64: dts: qcom: Add mx power domain as "
[PATCH][next] drivers: thermal: tsens: fix potential integer overflow on multiply
2019-10-30 12:52 UTC (3+ messages)
[PATCH v1 2/2] scsi: ufs-qcom: Export bus bandwidth voting ops
2019-10-30 12:37 UTC
[PATCH] dt-bindings: interconnect: Convert qcom,qcs404 to DT schema
2019-10-30 10:15 UTC
[PATCH 0/4] treewide: fix interrupted release
2019-10-30 10:01 UTC (3+ messages)
` [PATCH 1/4] drm/msm: fix memleak on release
[PATCH 0/2] sc7180: Add PDC wakeup interrupt map for GPIOs
2019-10-30 7:06 UTC (3+ messages)
` [PATCH 1/2] pinctrl: qcom: sc7180: Add GPIO wakeup interrupt map
` [PATCH 2/2] arm64: dts: qcom: sc7180: Add wakeup parent for TLMM
[PATCH 0/2] Add QMP V3 USB3 PHY support for SC7180
2019-10-30 6:55 UTC (3+ messages)
` [PATCH 1/2] phy: qcom-qmp: "
` [PATCH 2/2] dt-bindings: phy-qcom-qmp: Add SC7180 QMP phy support
[PATCH 0/4] Bluetooth: hci_qca: Regulator usage cleanup
2019-10-30 6:18 UTC (7+ messages)
` [PATCH 2/4] Bluetooth: hci_qca: Don't vote for specific voltage
[PATCH 00/13] cpuidle: psci: Support hierarchical CPU arrangement
2019-10-30 0:50 UTC (11+ messages)
` [PATCH 10/13] cpuidle: psci: Add a helper to attach a CPU to its PM domain
[RFC 00/17] Restructure, improve target support for qcom_scm driver
2019-10-29 19:40 UTC (5+ messages)
` [RFC 01/17] firmware: qcom_scm: Rename macros and structures
` [RFC 02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs
` [RFC 03/17] firmware: qcom_scm: Order functions, definitions by service/command
` [RFC 07/17] firmware: qcom_scm-64: Remove qcom_scm_call_do_smccc
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).