Linux-ARM-MSM Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3] clk: qcom: msm8916: Don't build drivers by default
@ 2019-06-19 11:44 Marc Gonzalez
  2019-06-19 13:47 ` Georgi Djakov
  0 siblings, 1 reply; 4+ messages in thread
From: Marc Gonzalez @ 2019-06-19 11:44 UTC (permalink / raw)
  To: Stephen Boyd, Michael Turquette
  Cc: linux-clk, MSM, Georgi Djakov, Amit Kucheria, Bjorn Andersson

QCOM_A53PLL and QCOM_CLK_APCS_MSM8916 stand out as the only options
built by default. List them in defconfig after dropping the default.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
---
 arch/arm64/configs/defconfig | 2 ++
 drivers/clk/qcom/Kconfig     | 2 --
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 5a8e853833cf..3277944626c2 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -658,6 +658,8 @@ CONFIG_CLK_IMX8MQ=y
 CONFIG_CLK_IMX8QXP=y
 CONFIG_TI_SCI_CLK=y
 CONFIG_COMMON_CLK_QCOM=y
+CONFIG_QCOM_A53PLL=y
+CONFIG_QCOM_CLK_APCS_MSM8916=y
 CONFIG_QCOM_CLK_SMD_RPM=y
 CONFIG_QCOM_CLK_RPMH=y
 CONFIG_IPQ_GCC_8074=y
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index e1ff83cc361e..6461a1aa7325 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -21,7 +21,6 @@ if COMMON_CLK_QCOM
 
 config QCOM_A53PLL
 	tristate "MSM8916 A53 PLL"
-	default ARCH_QCOM
 	help
 	  Support for the A53 PLL on MSM8916 devices. It provides
 	  the CPU with frequencies above 1GHz.
@@ -31,7 +30,6 @@ config QCOM_A53PLL
 config QCOM_CLK_APCS_MSM8916
 	tristate "MSM8916 APCS Clock Controller"
 	depends on QCOM_APCS_IPC || COMPILE_TEST
-	default ARCH_QCOM
 	help
 	  Support for the APCS Clock Controller on msm8916 devices. The
 	  APCS is managing the mux and divider which feeds the CPUs.
-- 
2.17.1

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v3] clk: qcom: msm8916: Don't build drivers by default
  2019-06-19 11:44 [PATCH v3] clk: qcom: msm8916: Don't build drivers by default Marc Gonzalez
@ 2019-06-19 13:47 ` Georgi Djakov
  2019-06-21 11:36   ` Marc Gonzalez
  0 siblings, 1 reply; 4+ messages in thread
From: Georgi Djakov @ 2019-06-19 13:47 UTC (permalink / raw)
  To: Marc Gonzalez, Stephen Boyd, Michael Turquette
  Cc: linux-clk, MSM, Amit Kucheria, Bjorn Andersson

On 19.06.19 14:44, Marc Gonzalez wrote:
> QCOM_A53PLL and QCOM_CLK_APCS_MSM8916 stand out as the only options
> built by default. List them in defconfig after dropping the default.
> 
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
> ---
>  arch/arm64/configs/defconfig | 2 ++
>  drivers/clk/qcom/Kconfig     | 2 --
>  2 files changed, 2 insertions(+), 2 deletions(-)

Hi Marc,

Sorry, I wasn't very clear. IMHO the defconfig change should be a
separate patch and the v2 of this patch is ok as it is. It would just
make things easier to merge.

Thanks,
Georgi
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 5a8e853833cf..3277944626c2 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -658,6 +658,8 @@ CONFIG_CLK_IMX8MQ=y
>  CONFIG_CLK_IMX8QXP=y
>  CONFIG_TI_SCI_CLK=y
>  CONFIG_COMMON_CLK_QCOM=y
> +CONFIG_QCOM_A53PLL=y
> +CONFIG_QCOM_CLK_APCS_MSM8916=y
>  CONFIG_QCOM_CLK_SMD_RPM=y
>  CONFIG_QCOM_CLK_RPMH=y
>  CONFIG_IPQ_GCC_8074=y
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index e1ff83cc361e..6461a1aa7325 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -21,7 +21,6 @@ if COMMON_CLK_QCOM
>  
>  config QCOM_A53PLL
>  	tristate "MSM8916 A53 PLL"
> -	default ARCH_QCOM
>  	help
>  	  Support for the A53 PLL on MSM8916 devices. It provides
>  	  the CPU with frequencies above 1GHz.
> @@ -31,7 +30,6 @@ config QCOM_A53PLL
>  config QCOM_CLK_APCS_MSM8916
>  	tristate "MSM8916 APCS Clock Controller"
>  	depends on QCOM_APCS_IPC || COMPILE_TEST
> -	default ARCH_QCOM
>  	help
>  	  Support for the APCS Clock Controller on msm8916 devices. The
>  	  APCS is managing the mux and divider which feeds the CPUs.
> 


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v3] clk: qcom: msm8916: Don't build drivers by default
  2019-06-19 13:47 ` Georgi Djakov
@ 2019-06-21 11:36   ` Marc Gonzalez
  2019-06-23 18:54     ` Amit Kucheria
  0 siblings, 1 reply; 4+ messages in thread
From: Marc Gonzalez @ 2019-06-21 11:36 UTC (permalink / raw)
  To: Georgi Djakov, Stephen Boyd, Michael Turquette
  Cc: linux-clk, MSM, Amit Kucheria, Bjorn Andersson

On 19/06/2019 15:47, Georgi Djakov wrote:

> On 19.06.19 14:44, Marc Gonzalez wrote:
> 
>> QCOM_A53PLL and QCOM_CLK_APCS_MSM8916 stand out as the only options
>> built by default. List them in defconfig after dropping the default.
>> 
>> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
>> ---
>>  arch/arm64/configs/defconfig | 2 ++
>>  drivers/clk/qcom/Kconfig     | 2 --
>>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> Sorry, I wasn't very clear. IMHO the defconfig change should be a
> separate patch and the v2 of this patch is ok as it is. It would just
> make things easier to merge.

Oh, I see. Could you give your Ack on patch 2 then?

Would the defconfig change go through the clk tree?
Or maybe through the qcom tree?

Regards.

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v3] clk: qcom: msm8916: Don't build drivers by default
  2019-06-21 11:36   ` Marc Gonzalez
@ 2019-06-23 18:54     ` Amit Kucheria
  0 siblings, 0 replies; 4+ messages in thread
From: Amit Kucheria @ 2019-06-23 18:54 UTC (permalink / raw)
  To: Marc Gonzalez
  Cc: Georgi Djakov, Stephen Boyd, Michael Turquette, linux-clk, MSM,
	Bjorn Andersson

On Fri, Jun 21, 2019 at 5:06 PM Marc Gonzalez <marc.w.gonzalez@free.fr> wrote:
>
> On 19/06/2019 15:47, Georgi Djakov wrote:
>
> > On 19.06.19 14:44, Marc Gonzalez wrote:
> >
> >> QCOM_A53PLL and QCOM_CLK_APCS_MSM8916 stand out as the only options
> >> built by default. List them in defconfig after dropping the default.
> >>
> >> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> >> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
> >> ---
> >>  arch/arm64/configs/defconfig | 2 ++
> >>  drivers/clk/qcom/Kconfig     | 2 --
> >>  2 files changed, 2 insertions(+), 2 deletions(-)
> >
> > Sorry, I wasn't very clear. IMHO the defconfig change should be a
> > separate patch and the v2 of this patch is ok as it is. It would just
> > make things easier to merge.
>
> Oh, I see. Could you give your Ack on patch 2 then?
>
> Would the defconfig change go through the clk tree?
> Or maybe through the qcom tree?

This defconfig change could easily go through the qcom tree IMO.

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, back to index

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-19 11:44 [PATCH v3] clk: qcom: msm8916: Don't build drivers by default Marc Gonzalez
2019-06-19 13:47 ` Georgi Djakov
2019-06-21 11:36   ` Marc Gonzalez
2019-06-23 18:54     ` Amit Kucheria

Linux-ARM-MSM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-msm/0 linux-arm-msm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-msm linux-arm-msm/ https://lore.kernel.org/linux-arm-msm \
		linux-arm-msm@vger.kernel.org linux-arm-msm@archiver.kernel.org
	public-inbox-index linux-arm-msm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-arm-msm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox