[PATCH 0/5] qcom: wcnss: Allow overriding firmware form DT

[PATCH 0/5] qcom: wcnss: Allow overriding firmware form DT

[Bjorn Andersson]

The wireless subsystem found in Qualcomm MSM8974 and MSM8916 among others needs
platform-, and perhaps even board-, specific firmware. Add support for
providing this in devicetree.

Bjorn Andersson (5):
  dt-bindings: soc: qcom: wcnss: Add firmware-name property
  wcn36xx: Allow firmware name to be overridden by DT
  soc: qcom: wcnss_ctrl: Introduce local variable "dev"
  soc: qcom: wcnss_ctrl: Allow reading firmware-name from DT
  arm64: dts: qcom: msm8916: Enable modem and WiFi

 .../devicetree/bindings/soc/qcom/qcom,wcnss.txt   |  7 +++++++
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi         | 12 ++++++++++++
 arch/arm64/boot/dts/qcom/msm8916.dtsi             |  2 +-
 drivers/net/wireless/ath/wcn36xx/main.c           |  7 +++++++
 drivers/net/wireless/ath/wcn36xx/smd.c            |  4 ++--
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h        |  1 +
 drivers/soc/qcom/wcnss_ctrl.c                     | 15 ++++++++++-----
 7 files changed, 40 insertions(+), 8 deletions(-)

-- 
2.29.2

[PATCH 1/5] dt-bindings: soc: qcom: wcnss: Add firmware-name property

[Bjorn Andersson]

The WCNSS needs firmware which differs between platforms, and possibly
boards. Add a new property "firmware-name" to allow the DT to specify
the platform/board specific path to this firmware file.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
index 042a2e4159bd..1382b64e1381 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
@@ -24,6 +24,13 @@ block and a BT, WiFi and FM radio block, all using SMD as command channels.
 		    "qcom,riva",
 		    "qcom,pronto"
 
+- firmware-name:
+	Usage: optional
+	Value type: <string>
+	Definition: specifies the relative firmware image path for the WLAN NV
+		    blob. Defaults to "wlan/prima/WCNSS_qcom_wlan_nv.bin" if
+		    not specified.
+
 = SUBNODES
 The subnodes of the wcnss node are optional and describe the individual blocks in
 the WCNSS.
-- 
2.29.2

Re: [PATCH 1/5] dt-bindings: soc: qcom: wcnss: Add firmware-name property

[Anibal Limon]

On 3/11/21 6:33 PM, Bjorn Andersson wrote:
> The WCNSS needs firmware which differs between platforms, and possibly
> boards. Add a new property "firmware-name" to allow the DT to specify
> the platform/board specific path to this firmware file.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by:  Aníbal Limón <anibal.limon@linaro.org>
> ---
>   Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt | 7 +++++++
>   1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
> index 042a2e4159bd..1382b64e1381 100644
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
> @@ -24,6 +24,13 @@ block and a BT, WiFi and FM radio block, all using SMD as command channels.
>   		    "qcom,riva",
>   		    "qcom,pronto"
>   
> +- firmware-name:
> +	Usage: optional
> +	Value type: <string>
> +	Definition: specifies the relative firmware image path for the WLAN NV
> +		    blob. Defaults to "wlan/prima/WCNSS_qcom_wlan_nv.bin" if
> +		    not specified.
> +
>   = SUBNODES
>   The subnodes of the wcnss node are optional and describe the individual blocks in
>   the WCNSS.
> 

Re: [PATCH 1/5] dt-bindings: soc: qcom: wcnss: Add firmware-name property

[Rob Herring]

On Thu, 11 Mar 2021 16:33:14 -0800, Bjorn Andersson wrote:
> The WCNSS needs firmware which differs between platforms, and possibly
> boards. Add a new property "firmware-name" to allow the DT to specify
> the platform/board specific path to this firmware file.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt | 7 +++++++
>  1 file changed, 7 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

[PATCH 2/5] wcn36xx: Allow firmware name to be overridden by DT

[Bjorn Andersson]

The WLAN NV firmware blob differs between platforms, and possibly
devices, so add support in the wcn36xx driver for reading the path of
this file from DT in order to allow these files to live in a generic
file system (or linux-firmware).

For some reason the parent (wcnss_ctrl) also needs to upload this blob,
so rather than specifying the same information in both nodes wcn36xx
reads the string from the parent's of_node.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

This patch can be applied independently of the others, but relates to the
acceptance of the addition to the DT binding (in patch 1/5). So my suggestion
is that this one goes through the ath tree and the others through the Qualcomm
SoC tree.

 drivers/net/wireless/ath/wcn36xx/main.c    | 7 +++++++
 drivers/net/wireless/ath/wcn36xx/smd.c     | 4 ++--
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
 3 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index afb4877eaad8..87b5c0ff16c0 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -1407,6 +1407,13 @@ static int wcn36xx_probe(struct platform_device *pdev)
 		goto out_wq;
 	}
 
+	wcn->nv_file = WLAN_NV_FILE;
+	ret = of_property_read_string(wcn->dev->parent->of_node, "firmware-name", &wcn->nv_file);
+	if (ret < 0 && ret != -EINVAL) {
+		wcn36xx_err("failed to read \"firmware-name\" property\n");
+		goto out_wq;
+	}
+
 	wcn->smd_channel = qcom_wcnss_open_channel(wcnss, "WLAN_CTRL", wcn36xx_smd_rsp_process, hw);
 	if (IS_ERR(wcn->smd_channel)) {
 		wcn36xx_err("failed to open WLAN_CTRL channel\n");
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index d0c3a1557e8d..7b928f988068 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -514,10 +514,10 @@ int wcn36xx_smd_load_nv(struct wcn36xx *wcn)
 	u16 fm_offset = 0;
 
 	if (!wcn->nv) {
-		ret = request_firmware(&wcn->nv, WLAN_NV_FILE, wcn->dev);
+		ret = request_firmware(&wcn->nv, wcn->nv_file, wcn->dev);
 		if (ret) {
 			wcn36xx_err("Failed to load nv file %s: %d\n",
-				      WLAN_NV_FILE, ret);
+				    wcn->nv_file, ret);
 			goto out;
 		}
 	}
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 71fa9992b118..5977af2116e3 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -185,6 +185,7 @@ struct wcn36xx {
 	struct device		*dev;
 	struct list_head	vif_list;
 
+	const char		*nv_file;
 	const struct firmware	*nv;
 
 	u8			fw_revision;
-- 
2.29.2

Re: [PATCH 2/5] wcn36xx: Allow firmware name to be overridden by DT

[Bryan O'Donoghue]

On 12/03/2021 00:33, Bjorn Andersson wrote:
> The WLAN NV firmware blob differs between platforms, and possibly
> devices, so add support in the wcn36xx driver for reading the path of
> this file from DT in order to allow these files to live in a generic
> file system (or linux-firmware).
> 
> For some reason the parent (wcnss_ctrl) also needs to upload this blob,
> so rather than specifying the same information in both nodes wcn36xx
> reads the string from the parent's of_node.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> This patch can be applied independently of the others, but relates to the
> acceptance of the addition to the DT binding (in patch 1/5). So my suggestion
> is that this one goes through the ath tree and the others through the Qualcomm
> SoC tree.
> 
>   drivers/net/wireless/ath/wcn36xx/main.c    | 7 +++++++
>   drivers/net/wireless/ath/wcn36xx/smd.c     | 4 ++--
>   drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
>   3 files changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
> index afb4877eaad8..87b5c0ff16c0 100644
> --- a/drivers/net/wireless/ath/wcn36xx/main.c
> +++ b/drivers/net/wireless/ath/wcn36xx/main.c
> @@ -1407,6 +1407,13 @@ static int wcn36xx_probe(struct platform_device *pdev)
>   		goto out_wq;
>   	}
>   
> +	wcn->nv_file = WLAN_NV_FILE;
> +	ret = of_property_read_string(wcn->dev->parent->of_node, "firmware-name", &wcn->nv_file);
> +	if (ret < 0 && ret != -EINVAL) {
> +		wcn36xx_err("failed to read \"firmware-name\" property\n");
> +		goto out_wq;
> +	}
> +
>   	wcn->smd_channel = qcom_wcnss_open_channel(wcnss, "WLAN_CTRL", wcn36xx_smd_rsp_process, hw);
>   	if (IS_ERR(wcn->smd_channel)) {
>   		wcn36xx_err("failed to open WLAN_CTRL channel\n");
> diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
> index d0c3a1557e8d..7b928f988068 100644
> --- a/drivers/net/wireless/ath/wcn36xx/smd.c
> +++ b/drivers/net/wireless/ath/wcn36xx/smd.c
> @@ -514,10 +514,10 @@ int wcn36xx_smd_load_nv(struct wcn36xx *wcn)
>   	u16 fm_offset = 0;
>   
>   	if (!wcn->nv) {
> -		ret = request_firmware(&wcn->nv, WLAN_NV_FILE, wcn->dev);
> +		ret = request_firmware(&wcn->nv, wcn->nv_file, wcn->dev);
>   		if (ret) {
>   			wcn36xx_err("Failed to load nv file %s: %d\n",
> -				      WLAN_NV_FILE, ret);
> +				    wcn->nv_file, ret);
>   			goto out;
>   		}
>   	}
> diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
> index 71fa9992b118..5977af2116e3 100644
> --- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
> +++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
> @@ -185,6 +185,7 @@ struct wcn36xx {
>   	struct device		*dev;
>   	struct list_head	vif_list;
>   
> +	const char		*nv_file;
>   	const struct firmware	*nv;
>   
>   	u8			fw_revision;
> 

Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

Re: [PATCH 2/5] wcn36xx: Allow firmware name to be overridden by DT

[Anibal Limon]

On 3/11/21 6:33 PM, Bjorn Andersson wrote:
> The WLAN NV firmware blob differs between platforms, and possibly
> devices, so add support in the wcn36xx driver for reading the path of
> this file from DT in order to allow these files to live in a generic
> file system (or linux-firmware).
> 
> For some reason the parent (wcnss_ctrl) also needs to upload this blob,
> so rather than specifying the same information in both nodes wcn36xx
> reads the string from the parent's of_node.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Aníbal Limón <anibal.limon@linaro.org>
> ---
> 
> This patch can be applied independently of the others, but relates to the
> acceptance of the addition to the DT binding (in patch 1/5). So my suggestion
> is that this one goes through the ath tree and the others through the Qualcomm
> SoC tree.
> 
>   drivers/net/wireless/ath/wcn36xx/main.c    | 7 +++++++
>   drivers/net/wireless/ath/wcn36xx/smd.c     | 4 ++--
>   drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
>   3 files changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
> index afb4877eaad8..87b5c0ff16c0 100644
> --- a/drivers/net/wireless/ath/wcn36xx/main.c
> +++ b/drivers/net/wireless/ath/wcn36xx/main.c
> @@ -1407,6 +1407,13 @@ static int wcn36xx_probe(struct platform_device *pdev)
>   		goto out_wq;
>   	}
>   
> +	wcn->nv_file = WLAN_NV_FILE;
> +	ret = of_property_read_string(wcn->dev->parent->of_node, "firmware-name", &wcn->nv_file);
> +	if (ret < 0 && ret != -EINVAL) {
> +		wcn36xx_err("failed to read \"firmware-name\" property\n");
> +		goto out_wq;
> +	}
> +
>   	wcn->smd_channel = qcom_wcnss_open_channel(wcnss, "WLAN_CTRL", wcn36xx_smd_rsp_process, hw);
>   	if (IS_ERR(wcn->smd_channel)) {
>   		wcn36xx_err("failed to open WLAN_CTRL channel\n");
> diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
> index d0c3a1557e8d..7b928f988068 100644
> --- a/drivers/net/wireless/ath/wcn36xx/smd.c
> +++ b/drivers/net/wireless/ath/wcn36xx/smd.c
> @@ -514,10 +514,10 @@ int wcn36xx_smd_load_nv(struct wcn36xx *wcn)
>   	u16 fm_offset = 0;
>   
>   	if (!wcn->nv) {
> -		ret = request_firmware(&wcn->nv, WLAN_NV_FILE, wcn->dev);
> +		ret = request_firmware(&wcn->nv, wcn->nv_file, wcn->dev);
>   		if (ret) {
>   			wcn36xx_err("Failed to load nv file %s: %d\n",
> -				      WLAN_NV_FILE, ret);
> +				    wcn->nv_file, ret);
>   			goto out;
>   		}
>   	}
> diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
> index 71fa9992b118..5977af2116e3 100644
> --- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
> +++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
> @@ -185,6 +185,7 @@ struct wcn36xx {
>   	struct device		*dev;
>   	struct list_head	vif_list;
>   
> +	const char		*nv_file;
>   	const struct firmware	*nv;
>   
>   	u8			fw_revision;
> 

[PATCH 3/5] soc: qcom: wcnss_ctrl: Introduce local variable "dev"

[Bjorn Andersson]

Introduce a local variable to carry the struct device *, to reduce the
line lengths in the next patch.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/soc/qcom/wcnss_ctrl.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
index 32bed249f90e..358526b9de06 100644
--- a/drivers/soc/qcom/wcnss_ctrl.c
+++ b/drivers/soc/qcom/wcnss_ctrl.c
@@ -199,6 +199,7 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
 {
 	struct wcnss_download_nv_req *req;
 	const struct firmware *fw;
+	struct device *dev = wcnss->dev;
 	const void *data;
 	ssize_t left;
 	int ret;
@@ -207,9 +208,9 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
 	if (!req)
 		return -ENOMEM;
 
-	ret = request_firmware(&fw, NVBIN_FILE, wcnss->dev);
+	ret = request_firmware(&fw, NVBIN_FILE, dev);
 	if (ret < 0) {
-		dev_err(wcnss->dev, "Failed to load nv file %s: %d\n",
+		dev_err(dev, "Failed to load nv file %s: %d\n",
 			NVBIN_FILE, ret);
 		goto free_req;
 	}
@@ -235,7 +236,7 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
 
 		ret = rpmsg_send(wcnss->channel, req, req->hdr.len);
 		if (ret < 0) {
-			dev_err(wcnss->dev, "failed to send smd packet\n");
+			dev_err(dev, "failed to send smd packet\n");
 			goto release_fw;
 		}
 
@@ -248,7 +249,7 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
 
 	ret = wait_for_completion_timeout(&wcnss->ack, WCNSS_REQUEST_TIMEOUT);
 	if (!ret) {
-		dev_err(wcnss->dev, "timeout waiting for nv upload ack\n");
+		dev_err(dev, "timeout waiting for nv upload ack\n");
 		ret = -ETIMEDOUT;
 	} else {
 		*expect_cbc = wcnss->ack_status == WCNSS_ACK_COLD_BOOTING;
-- 
2.29.2

Re: [PATCH 3/5] soc: qcom: wcnss_ctrl: Introduce local variable "dev"

[Anibal Limon]

On 3/11/21 6:33 PM, Bjorn Andersson wrote:
> Introduce a local variable to carry the struct device *, to reduce the
> line lengths in the next patch.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Aníbal Limón <anibal.limon@linaro.org>
> ---
>   drivers/soc/qcom/wcnss_ctrl.c | 9 +++++----
>   1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
> index 32bed249f90e..358526b9de06 100644
> --- a/drivers/soc/qcom/wcnss_ctrl.c
> +++ b/drivers/soc/qcom/wcnss_ctrl.c
> @@ -199,6 +199,7 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
>   {
>   	struct wcnss_download_nv_req *req;
>   	const struct firmware *fw;
> +	struct device *dev = wcnss->dev;
>   	const void *data;
>   	ssize_t left;
>   	int ret;
> @@ -207,9 +208,9 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
>   	if (!req)
>   		return -ENOMEM;
>   
> -	ret = request_firmware(&fw, NVBIN_FILE, wcnss->dev);
> +	ret = request_firmware(&fw, NVBIN_FILE, dev);
>   	if (ret < 0) {
> -		dev_err(wcnss->dev, "Failed to load nv file %s: %d\n",
> +		dev_err(dev, "Failed to load nv file %s: %d\n",
>   			NVBIN_FILE, ret);
>   		goto free_req;
>   	}
> @@ -235,7 +236,7 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
>   
>   		ret = rpmsg_send(wcnss->channel, req, req->hdr.len);
>   		if (ret < 0) {
> -			dev_err(wcnss->dev, "failed to send smd packet\n");
> +			dev_err(dev, "failed to send smd packet\n");
>   			goto release_fw;
>   		}
>   
> @@ -248,7 +249,7 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
>   
>   	ret = wait_for_completion_timeout(&wcnss->ack, WCNSS_REQUEST_TIMEOUT);
>   	if (!ret) {
> -		dev_err(wcnss->dev, "timeout waiting for nv upload ack\n");
> +		dev_err(dev, "timeout waiting for nv upload ack\n");
>   		ret = -ETIMEDOUT;
>   	} else {
>   		*expect_cbc = wcnss->ack_status == WCNSS_ACK_COLD_BOOTING;
> 

[PATCH 4/5] soc: qcom: wcnss_ctrl: Allow reading firmware-name from DT

[Bjorn Andersson]

The WLAN NV firmware blob differs between platforms, and possibly
devices, so add support in the wcnss_ctrl driver for reading the path of
this file from DT in order to allow these files to live in a generic
file system (or linux-firmware).

The new property is optional and the code falls back to the old filename
if the property isn't specified.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/soc/qcom/wcnss_ctrl.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
index 358526b9de06..2a06d631e415 100644
--- a/drivers/soc/qcom/wcnss_ctrl.c
+++ b/drivers/soc/qcom/wcnss_ctrl.c
@@ -200,6 +200,7 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
 	struct wcnss_download_nv_req *req;
 	const struct firmware *fw;
 	struct device *dev = wcnss->dev;
+	const char *nvbin = NVBIN_FILE;
 	const void *data;
 	ssize_t left;
 	int ret;
@@ -208,10 +209,13 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
 	if (!req)
 		return -ENOMEM;
 
-	ret = request_firmware(&fw, NVBIN_FILE, dev);
+	ret = of_property_read_string(dev->of_node, "firmware-name", &nvbin);
+	if (ret < 0 && ret != -EINVAL)
+		goto free_req;
+
+	ret = request_firmware(&fw, nvbin, dev);
 	if (ret < 0) {
-		dev_err(dev, "Failed to load nv file %s: %d\n",
-			NVBIN_FILE, ret);
+		dev_err(dev, "Failed to load nv file %s: %d\n", nvbin, ret);
 		goto free_req;
 	}
 
-- 
2.29.2

Re: [PATCH 4/5] soc: qcom: wcnss_ctrl: Allow reading firmware-name from DT

[Bryan O'Donoghue]

On 12/03/2021 00:33, Bjorn Andersson wrote:
> The WLAN NV firmware blob differs between platforms, and possibly
> devices, so add support in the wcnss_ctrl driver for reading the path of
> this file from DT in order to allow these files to live in a generic
> file system (or linux-firmware).
> 
> The new property is optional and the code falls back to the old filename
> if the property isn't specified.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>   drivers/soc/qcom/wcnss_ctrl.c | 10 +++++++---
>   1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
> index 358526b9de06..2a06d631e415 100644
> --- a/drivers/soc/qcom/wcnss_ctrl.c
> +++ b/drivers/soc/qcom/wcnss_ctrl.c
> @@ -200,6 +200,7 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
>   	struct wcnss_download_nv_req *req;
>   	const struct firmware *fw;
>   	struct device *dev = wcnss->dev;
> +	const char *nvbin = NVBIN_FILE;
>   	const void *data;
>   	ssize_t left;
>   	int ret;
> @@ -208,10 +209,13 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
>   	if (!req)
>   		return -ENOMEM;
>   
> -	ret = request_firmware(&fw, NVBIN_FILE, dev);
> +	ret = of_property_read_string(dev->of_node, "firmware-name", &nvbin);
> +	if (ret < 0 && ret != -EINVAL)
> +		goto free_req;
> +
> +	ret = request_firmware(&fw, nvbin, dev);
>   	if (ret < 0) {
> -		dev_err(dev, "Failed to load nv file %s: %d\n",
> -			NVBIN_FILE, ret);
> +		dev_err(dev, "Failed to load nv file %s: %d\n", nvbin, ret);
>   		goto free_req;
>   	}
>   
> 

Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

Re: [PATCH 4/5] soc: qcom: wcnss_ctrl: Allow reading firmware-name from DT

[Anibal Limon]

On 3/11/21 6:33 PM, Bjorn Andersson wrote:
> The WLAN NV firmware blob differs between platforms, and possibly
> devices, so add support in the wcnss_ctrl driver for reading the path of
> this file from DT in order to allow these files to live in a generic
> file system (or linux-firmware).
> 
> The new property is optional and the code falls back to the old filename
> if the property isn't specified.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Aníbal Limón <anibal.limon@linaro.org>
> ---
>   drivers/soc/qcom/wcnss_ctrl.c | 10 +++++++---
>   1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
> index 358526b9de06..2a06d631e415 100644
> --- a/drivers/soc/qcom/wcnss_ctrl.c
> +++ b/drivers/soc/qcom/wcnss_ctrl.c
> @@ -200,6 +200,7 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
>   	struct wcnss_download_nv_req *req;
>   	const struct firmware *fw;
>   	struct device *dev = wcnss->dev;
> +	const char *nvbin = NVBIN_FILE;
>   	const void *data;
>   	ssize_t left;
>   	int ret;
> @@ -208,10 +209,13 @@ static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
>   	if (!req)
>   		return -ENOMEM;
>   
> -	ret = request_firmware(&fw, NVBIN_FILE, dev);
> +	ret = of_property_read_string(dev->of_node, "firmware-name", &nvbin);
> +	if (ret < 0 && ret != -EINVAL)
> +		goto free_req;
> +
> +	ret = request_firmware(&fw, nvbin, dev);
>   	if (ret < 0) {
> -		dev_err(dev, "Failed to load nv file %s: %d\n",
> -			NVBIN_FILE, ret);
> +		dev_err(dev, "Failed to load nv file %s: %d\n", nvbin, ret);
>   		goto free_req;
>   	}
>   
> 

[PATCH 5/5] arm64: dts: qcom: msm8916: Enable modem and WiFi

[Bjorn Andersson]

Enable the modem and WiFi subsystems and specify msm8916 specific
firmware path for these and the WCNSS control service.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++
 arch/arm64/boot/dts/qcom/msm8916.dtsi     |  2 +-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 6aef0c2e4f0a..448e3561ef63 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -305,6 +305,12 @@ &mdss {
 	status = "okay";
 };
 
+&mpss {
+	status = "okay";
+
+	firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn";
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -312,6 +318,8 @@ &pm8916_resin {
 
 &pronto {
 	status = "okay";
+
+	firmware-name = "qcom/msm8916/wcnss.mbn";
 };
 
 &sdhc_1 {
@@ -394,6 +402,10 @@ &wcd_codec {
 	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
 };
 
+&wcnss_ctrl {
+	firmware-name = "qcom/msm8916/WCNSS_qcom_wlan_nv.bin";
+};
+
 /* Enable CoreSight */
 &cti0 { status = "okay"; };
 &cti1 { status = "okay"; };
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5353da521974..1118836c15dd 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1738,7 +1738,7 @@ smd-edge {
 
 				label = "pronto";
 
-				wcnss {
+				wcnss_ctrl: wcnss {
 					compatible = "qcom,wcnss";
 					qcom,smd-channels = "WCNSS_CTRL";
 
-- 
2.29.2

Re: [PATCH 5/5] arm64: dts: qcom: msm8916: Enable modem and WiFi

[Bryan O'Donoghue]

On 12/03/2021 00:33, Bjorn Andersson wrote:
> firmware-name = "qcom/msm8916/WCNSS_qcom_wlan_nv.bin";

On the Linaro debian build I have to do this

+       firmware-name = "wlan/prima/WCNSS_qcom_wlan_nv.bin";

---
bod

Re: [PATCH 5/5] arm64: dts: qcom: msm8916: Enable modem and WiFi

[Bryan O'Donoghue]

On 12/03/2021 00:33, Bjorn Andersson wrote:
> Enable the modem and WiFi subsystems and specify msm8916 specific
> firmware path for these and the WCNSS control service.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++
>   arch/arm64/boot/dts/qcom/msm8916.dtsi     |  2 +-
>   2 files changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> index 6aef0c2e4f0a..448e3561ef63 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> @@ -305,6 +305,12 @@ &mdss {
>   	status = "okay";
>   };
>   
> +&mpss {
> +	status = "okay";
> +
> +	firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn";
> +};
> +
>   &pm8916_resin {
>   	status = "okay";
>   	linux,code = <KEY_VOLUMEDOWN>;
> @@ -312,6 +318,8 @@ &pm8916_resin {
>   
>   &pronto {
>   	status = "okay";
> +
> +	firmware-name = "qcom/msm8916/wcnss.mbn";
>   };

On Debian I have to do this


index 2a6a23cb14ca..597cdc8f51cc 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -33,7 +33,7 @@
  #include "qcom_wcnss.h"

  #define WCNSS_CRASH_REASON_SMEM                422
-#define WCNSS_FIRMWARE_NAME            "wcnss.mdt"
+#define WCNSS_FIRMWARE_NAME            "qcom/msm8916/wcnss.mdt"

so I guess wcnss_probe() -> rproc_alloc() wants this fix too.

---
bod

Re: [PATCH 5/5] arm64: dts: qcom: msm8916: Enable modem and WiFi

[Bjorn Andersson]

On Mon 15 Mar 07:01 CDT 2021, Bryan O'Donoghue wrote:

> On 12/03/2021 00:33, Bjorn Andersson wrote:
> > Enable the modem and WiFi subsystems and specify msm8916 specific
> > firmware path for these and the WCNSS control service.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> >   arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++
> >   arch/arm64/boot/dts/qcom/msm8916.dtsi     |  2 +-
> >   2 files changed, 13 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > index 6aef0c2e4f0a..448e3561ef63 100644
> > --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > @@ -305,6 +305,12 @@ &mdss {
> >   	status = "okay";
> >   };
> > +&mpss {
> > +	status = "okay";
> > +
> > +	firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn";
> > +};
> > +
> >   &pm8916_resin {
> >   	status = "okay";
> >   	linux,code = <KEY_VOLUMEDOWN>;
> > @@ -312,6 +318,8 @@ &pm8916_resin {
> >   &pronto {
> >   	status = "okay";
> > +
> > +	firmware-name = "qcom/msm8916/wcnss.mbn";
> >   };
> 
> On Debian I have to do this
> 
> 
> index 2a6a23cb14ca..597cdc8f51cc 100644
> --- a/drivers/remoteproc/qcom_wcnss.c
> +++ b/drivers/remoteproc/qcom_wcnss.c
> @@ -33,7 +33,7 @@
>  #include "qcom_wcnss.h"
> 
>  #define WCNSS_CRASH_REASON_SMEM                422
> -#define WCNSS_FIRMWARE_NAME            "wcnss.mdt"
> +#define WCNSS_FIRMWARE_NAME            "qcom/msm8916/wcnss.mdt"
> 
> so I guess wcnss_probe() -> rproc_alloc() wants this fix too.
> 

Can you confirm that you're saying that you want below patch, which I
just merged?

https://lore.kernel.org/linux-remoteproc/20210312002441.3273183-1-bjorn.andersson@linaro.org/

(Which makes it possible to specify firmware name per platform/board)

Regards,
Bjorn

Re: [PATCH 5/5] arm64: dts: qcom: msm8916: Enable modem and WiFi

[Bryan O'Donoghue]

On 18/03/2021 14:50, Bjorn Andersson wrote:
> On Mon 15 Mar 07:01 CDT 2021, Bryan O'Donoghue wrote:
> 
>> On 12/03/2021 00:33, Bjorn Andersson wrote:
>>> Enable the modem and WiFi subsystems and specify msm8916 specific
>>> firmware path for these and the WCNSS control service.
>>>
>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>>> ---
>>>    arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++
>>>    arch/arm64/boot/dts/qcom/msm8916.dtsi     |  2 +-
>>>    2 files changed, 13 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
>>> index 6aef0c2e4f0a..448e3561ef63 100644
>>> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
>>> @@ -305,6 +305,12 @@ &mdss {
>>>    	status = "okay";
>>>    };
>>> +&mpss {
>>> +	status = "okay";
>>> +
>>> +	firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn";
>>> +};
>>> +
>>>    &pm8916_resin {
>>>    	status = "okay";
>>>    	linux,code = <KEY_VOLUMEDOWN>;
>>> @@ -312,6 +318,8 @@ &pm8916_resin {
>>>    &pronto {
>>>    	status = "okay";
>>> +
>>> +	firmware-name = "qcom/msm8916/wcnss.mbn";
>>>    };
>>
>> On Debian I have to do this
>>
>>
>> index 2a6a23cb14ca..597cdc8f51cc 100644
>> --- a/drivers/remoteproc/qcom_wcnss.c
>> +++ b/drivers/remoteproc/qcom_wcnss.c
>> @@ -33,7 +33,7 @@
>>   #include "qcom_wcnss.h"
>>
>>   #define WCNSS_CRASH_REASON_SMEM                422
>> -#define WCNSS_FIRMWARE_NAME            "wcnss.mdt"
>> +#define WCNSS_FIRMWARE_NAME            "qcom/msm8916/wcnss.mdt"
>>
>> so I guess wcnss_probe() -> rproc_alloc() wants this fix too.
>>
> 
> Can you confirm that you're saying that you want below patch, which I
> just merged?
> 
> https://lore.kernel.org/linux-remoteproc/20210312002441.3273183-1-bjorn.andersson@linaro.org/
> 
> (Which makes it possible to specify firmware name per platform/board)
> 
> Regards,
> Bjorn
> 

yep

Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

Re: [PATCH 5/5] arm64: dts: qcom: msm8916: Enable modem and WiFi

[Stephan Gerhold]

Hi Bjorn,

On Thu, Mar 11, 2021 at 04:33:18PM -0800, Bjorn Andersson wrote:
> Enable the modem and WiFi subsystems and specify msm8916 specific
> firmware path for these and the WCNSS control service.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The changes itself look good to me, but the commit message is really
misleading. It does not mention anywhere that the change actually just
enables "modem" on apq8016-sbc instead of "msm8916". :)

Also, WCNSS was actually enabled before already (with the default
firmware path). In my opinion, it would be clearer to change the
firmware-name for it in an extra patch.

> ---
>  arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++
>  arch/arm64/boot/dts/qcom/msm8916.dtsi     |  2 +-
>  2 files changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> index 6aef0c2e4f0a..448e3561ef63 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> @@ -305,6 +305,12 @@ &mdss {
>  	status = "okay";
>  };
>  
> +&mpss {
> +	status = "okay";
> +
> +	firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn";
> +};
> +
>  &pm8916_resin {
>  	status = "okay";
>  	linux,code = <KEY_VOLUMEDOWN>;
> @@ -312,6 +318,8 @@ &pm8916_resin {
>  
>  &pronto {
>  	status = "okay";
> +
> +	firmware-name = "qcom/msm8916/wcnss.mbn";
>  };
>  

How do I get a .mbn from the wcnss.{mdt,.b??} files provided in the
DB410c firmware package? I guess I should just run them through
https://github.com/andersson/pil-squasher?

Also, is the single file format (mbn) preferred now? Not sure if there
is any significant difference except having less files laying around.

Thanks,
Stephan

Re: [PATCH 5/5] arm64: dts: qcom: msm8916: Enable modem and WiFi

[Anibal Limon]

On 3/19/21 9:19 AM, Stephan Gerhold wrote:
> Hi Bjorn,
> 
> On Thu, Mar 11, 2021 at 04:33:18PM -0800, Bjorn Andersson wrote:
>> Enable the modem and WiFi subsystems and specify msm8916 specific
>> firmware path for these and the WCNSS control service.
>>
>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> The changes itself look good to me, but the commit message is really
> misleading. It does not mention anywhere that the change actually just
> enables "modem" on apq8016-sbc instead of "msm8916". :)
> 
> Also, WCNSS was actually enabled before already (with the default
> firmware path). In my opinion, it would be clearer to change the
> firmware-name for it in an extra patch.
> 
>> ---
>>   arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++
>>   arch/arm64/boot/dts/qcom/msm8916.dtsi     |  2 +-
>>   2 files changed, 13 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
>> index 6aef0c2e4f0a..448e3561ef63 100644
>> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
>> @@ -305,6 +305,12 @@ &mdss {
>>   	status = "okay";
>>   };
>>   
>> +&mpss {
>> +	status = "okay";
>> +
>> +	firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn";
>> +};
>> +
>>   &pm8916_resin {
>>   	status = "okay";
>>   	linux,code = <KEY_VOLUMEDOWN>;
>> @@ -312,6 +318,8 @@ &pm8916_resin {
>>   
>>   &pronto {
>>   	status = "okay";
>> +
>> +	firmware-name = "qcom/msm8916/wcnss.mbn";
>>   };
>>   
> 
> How do I get a .mbn from the wcnss.{mdt,.b??} files provided in the
> DB410c firmware package? I guess I should just run them through
> https://github.com/andersson/pil-squasher?
> 
> Also, is the single file format (mbn) preferred now? Not sure if there
> is any significant difference except having less files laying around.

Same issue here, where can I get mbn file?,

After change the file to use wcnss.mdt this patch works.

Regards,
Anibal
> 
> Thanks,
> Stephan
> 
> 

Re: [PATCH 5/5] arm64: dts: qcom: msm8916: Enable modem and WiFi

[Bjorn Andersson]

On Fri 19 Mar 10:19 CDT 2021, Stephan Gerhold wrote:

> Hi Bjorn,
> 

Hi Stephan,

I thought I wrote you a reply, but I don't see it on lore or in my
mailbox...

> On Thu, Mar 11, 2021 at 04:33:18PM -0800, Bjorn Andersson wrote:
> > Enable the modem and WiFi subsystems and specify msm8916 specific
> > firmware path for these and the WCNSS control service.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> The changes itself look good to me, but the commit message is really
> misleading. It does not mention anywhere that the change actually just
> enables "modem" on apq8016-sbc instead of "msm8916". :)
> 
> Also, WCNSS was actually enabled before already (with the default
> firmware path). In my opinion, it would be clearer to change the
> firmware-name for it in an extra patch.
> 

You're right, I will rewrite the commit message.

> > ---
> >  arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++
> >  arch/arm64/boot/dts/qcom/msm8916.dtsi     |  2 +-
> >  2 files changed, 13 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > index 6aef0c2e4f0a..448e3561ef63 100644
> > --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > @@ -305,6 +305,12 @@ &mdss {
> >  	status = "okay";
> >  };
> >  
> > +&mpss {
> > +	status = "okay";
> > +
> > +	firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn";
> > +};
> > +
> >  &pm8916_resin {
> >  	status = "okay";
> >  	linux,code = <KEY_VOLUMEDOWN>;
> > @@ -312,6 +318,8 @@ &pm8916_resin {
> >  
> >  &pronto {
> >  	status = "okay";
> > +
> > +	firmware-name = "qcom/msm8916/wcnss.mbn";
> >  };
> >  
> 
> How do I get a .mbn from the wcnss.{mdt,.b??} files provided in the
> DB410c firmware package? I guess I should just run them through
> https://github.com/andersson/pil-squasher?
> 

Yes, .mdt + .bNN files can be put back together as a .mbn by running
them through the pil-squasher.

It's worth mentioning that the suffix doesn't matter for the loader, so
symlinking the .mdt to .mbn (in either way) will keep the kernel
happy - if that simplifies transitions in either way.

> Also, is the single file format (mbn) preferred now? Not sure if there
> is any significant difference except having less files laying around.
> 

We've had numerous cases where people has managed to mix the parts from
different versions of the firmware, sometimes with the nice result of
the loader complaining that some particular .bNN file is missing
other times just with the signature check (mysteriously) failing.

Lumping the parts into a single .mbn resolves all these issues and
hence I prefer this. It is however not a requirement.

Regards,
Bjorn

Re: [PATCH 0/5] qcom: wcnss: Allow overriding firmware form DT

[Vinod Koul]

On 11-03-21, 16:33, Bjorn Andersson wrote:
> The wireless subsystem found in Qualcomm MSM8974 and MSM8916 among others needs
> platform-, and perhaps even board-, specific firmware. Add support for
> providing this in devicetree.

Reviewed-by: Vinod Koul <vkoul@kernel.org>

-- 
~Vinod

Re: [PATCH 0/5] qcom: wcnss: Allow overriding firmware form DT

[Jeffrey Hugo]

form -> from in the subject?

On Thu, Mar 11, 2021 at 5:34 PM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> The wireless subsystem found in Qualcomm MSM8974 and MSM8916 among others needs
> platform-, and perhaps even board-, specific firmware. Add support for
> providing this in devicetree.

Re: [PATCH 0/5] qcom: wcnss: Allow overriding firmware form DT

[Bjorn Andersson]

On Thu 18 Mar 11:56 CDT 2021, Jeffrey Hugo wrote:

> form -> from in the subject?
> 

Seems like I only failed in the cover letter, right?

Regards,
Bjorn

> On Thu, Mar 11, 2021 at 5:34 PM Bjorn Andersson
> <bjorn.andersson@linaro.org> wrote:
> >
> > The wireless subsystem found in Qualcomm MSM8974 and MSM8916 among others needs
> > platform-, and perhaps even board-, specific firmware. Add support for
> > providing this in devicetree.

Re: [PATCH 0/5] qcom: wcnss: Allow overriding firmware form DT

[Jeffrey Hugo]

On Thu, Mar 18, 2021 at 11:06 AM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> On Thu 18 Mar 11:56 CDT 2021, Jeffrey Hugo wrote:
>
> > form -> from in the subject?
> >
>
> Seems like I only failed in the cover letter, right?

Looks like.  I didn't even parse that this was the cover letter.

Nothing to see here.