linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, bhupesh.linux@gmail.com,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Vinod Koul <vkoul@kernel.org>,
	Rob Herring <robh+dt@kernel.org>, Andy Gross <agross@kernel.org>
Subject: Re: [PATCH v2 05/10] regulator: qcom-rpmh: Cleanup terminator line commas
Date: Tue, 15 Jun 2021 16:06:42 -0500	[thread overview]
Message-ID: <YMkWYkrwHilEX0ck@builder.lan> (raw)
In-Reply-To: <20210615074543.26700-6-bhupesh.sharma@linaro.org>

On Tue 15 Jun 02:45 CDT 2021, Bhupesh Sharma wrote:

> Cleanup the qcom-rpmh regulator driver:
> - remove comma(s) at the end of the terminator line.
> - add missing terminator in instances of
>   pm7325x_vreg_data[] arrays.

This second part needs a:

Fixes: c4e5aa3dbee5 ("regulator: qcom-rpmh: Add PM7325/PMR735A regulator support")

So it's up to Mark if he wants both parts in a single patch.

> 
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Liam Girdwood <lgirdwood@gmail.com>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Andy Gross <agross@kernel.org>

I don't think these Cc tags serves a purpose here. The patch itself
looks good though

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  drivers/regulator/qcom-rpmh-regulator.c | 26 +++++++++++++------------
>  1 file changed, 14 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
> index 22fec370fa61..af41a517da99 100644
> --- a/drivers/regulator/qcom-rpmh-regulator.c
> +++ b/drivers/regulator/qcom-rpmh-regulator.c
> @@ -811,12 +811,12 @@ static const struct rpmh_vreg_init_data pm8998_vreg_data[] = {
>  	RPMH_VREG("ldo28",  "ldo%s28", &pmic4_pldo,      "vdd-l16-l28"),
>  	RPMH_VREG("lvs1",   "vs%s1",   &pmic4_lvs,       "vin-lvs-1-2"),
>  	RPMH_VREG("lvs2",   "vs%s2",   &pmic4_lvs,       "vin-lvs-1-2"),
> -	{},
> +	{}
>  };
>  
>  static const struct rpmh_vreg_init_data pmi8998_vreg_data[] = {
>  	RPMH_VREG("bob",    "bob%s1",  &pmic4_bob,       "vdd-bob"),
> -	{},
> +	{}
>  };
>  
>  static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
> @@ -824,7 +824,7 @@ static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
>  	RPMH_VREG("smps2",  "smp%s2",  &pmic4_ftsmps426, "vdd-s2"),
>  	RPMH_VREG("smps3",  "smp%s3",  &pmic4_ftsmps426, "vdd-s3"),
>  	RPMH_VREG("smps4",  "smp%s4",  &pmic4_ftsmps426, "vdd-s4"),
> -	{},
> +	{}
>  };
>  
>  static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
> @@ -856,7 +856,7 @@ static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
>  	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l16-l17"),
>  	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l16-l17"),
>  	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
> -	{},
> +	{}
>  };
>  
>  static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
> @@ -880,7 +880,7 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
>  	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l9-l10"),
>  	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l7-l11"),
>  	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
> -	{},
> +	{}
>  };
>  
>  static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
> @@ -906,7 +906,7 @@ static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
>  	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_nldo,      "vdd-l8"),
>  	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_nldo,      "vdd-l6-l9-l10"),
>  	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_nldo,      "vdd-l6-l9-l10"),
> -	{},
> +	{}
>  };
>  
>  static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
> @@ -934,7 +934,7 @@ static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
>  	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo_lv,   "vdd-l1-l12"),
>  	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l3-l4-l5-l7-l13"),
>  	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
> -	{},
> +	{}
>  };
>  
>  static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
> @@ -947,7 +947,7 @@ static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
>  	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l5-l6"),
>  	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l5-l6"),
>  	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo_lv,   "vdd-l7"),
> -	{},
> +	{}
>  };
>  
>  static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
> @@ -960,7 +960,7 @@ static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
>  	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l5-l6"),
>  	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l5-l6"),
>  	RPMH_VREG("ldo7",   "ldo%s6",  &pmic5_pldo_lv,   "vdd-l7"),
> -	{},
> +	{}
>  };
>  
>  static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
> @@ -988,7 +988,7 @@ static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
>  	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,   "vdd-l5-l16-l17-l18-l19"),
>  	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_pldo,   "vdd-l5-l16-l17-l18-l19"),
>  	RPMH_VREG("ldo19",  "ldo%s19", &pmic5_pldo,   "vdd-l5-l16-l17-l18-l19"),
> -	{},
> +	{}
>  };
>  
>  static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
> @@ -1012,7 +1012,7 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
>  	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l9-l10"),
>  	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l7-l11"),
>  	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
> -	{},
> +	{}
>  };
>  
>  static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
> @@ -1039,7 +1039,7 @@ static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
>  	RPMH_VREG("ldo14",   "ldo%s14",   &pmic5_nldo,      "vdd-l14"),
>  	RPMH_VREG("ldo15",   "ldo%s15",   &pmic5_nldo,      "vdd-l15"),
>  	RPMH_VREG("ldo16",   "ldo%s16",   &pmic5_pldo,      "vdd-l16"),
> -	{},
> +	{}
>  };
>  
>  static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
> @@ -1070,6 +1070,7 @@ static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
>  	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo_lv,   "vdd-l11-l17-l18-l19"),
>  	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_pldo_lv,   "vdd-l11-l17-l18-l19"),
>  	RPMH_VREG("ldo19",  "ldo%s19", &pmic5_pldo_lv,   "vdd-l11-l17-l18-l19"),
> +	{}
>  };
>  
>  static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
> @@ -1083,6 +1084,7 @@ static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
>  	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_nldo,      "vdd-l5-l6"),
>  	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_nldo,      "vdd-l5-l6"),
>  	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l7-bob"),
> +	{}
>  };
>  
>  static int rpmh_regulator_probe(struct platform_device *pdev)
> -- 
> 2.31.1
> 

  reply	other threads:[~2021-06-15 21:06 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-15  7:45 [PATCH v2 00/10] arm64: dts: qcom: Add SA8155p-adp board DTS Bhupesh Sharma
2021-06-15  7:45 ` [PATCH v2 01/10] dt-bindings: qcom: rpmh-regulator: Add compatible for SA8155p-adp board pmic Bhupesh Sharma
2021-06-24 20:47   ` Rob Herring
2021-06-15  7:45 ` [PATCH v2 02/10] dt-bindings: pinctrl: qcom,pmic-gpio: Add compatible for SA8155p-adp Bhupesh Sharma
2021-06-15 21:00   ` Bjorn Andersson
2021-06-16  6:26     ` Bhupesh Sharma
2021-06-15  7:45 ` [PATCH v2 03/10] dt-bindings: arm: qcom: Add compatible for sm8150-mtp board Bhupesh Sharma
2021-06-15  7:45 ` [PATCH v2 04/10] dt-bindings: arm: qcom: Add compatible for SA8155p-adp board Bhupesh Sharma
2021-06-15  7:45 ` [PATCH v2 05/10] regulator: qcom-rpmh: Cleanup terminator line commas Bhupesh Sharma
2021-06-15 21:06   ` Bjorn Andersson [this message]
2021-06-15  7:45 ` [PATCH v2 06/10] regulator: qcom-rpmh: Add new regulator found on SA8155p adp board Bhupesh Sharma
2021-06-15 11:12   ` Mark Brown
2021-06-15 14:38     ` Bhupesh Sharma
2021-06-15 15:35       ` Mark Brown
2021-06-15 21:10   ` Bjorn Andersson
2021-06-15  7:45 ` [PATCH v2 07/10] pinctrl: qcom/pinctrl-spmi-gpio: Add compatible for pmic-gpio on SA8155p-adp Bhupesh Sharma
2021-06-15 21:07   ` Bjorn Andersson
2021-06-15  7:45 ` [PATCH v2 08/10] arm64: dts: qcom: pmm8155au_1: Add base dts file Bhupesh Sharma
2021-06-15 21:08   ` Bjorn Andersson
2021-06-15  7:45 ` [PATCH v2 09/10] arm64: dts: qcom: pmm8155au_2: " Bhupesh Sharma
2021-06-15 21:09   ` Bjorn Andersson
2021-06-15  7:45 ` [PATCH v2 10/10] arm64: dts: qcom: sa8155p-adp: " Bhupesh Sharma
2021-06-15 14:53   ` Konrad Dybcio
2021-06-15 17:00     ` Bhupesh Sharma
2021-06-15 21:13   ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YMkWYkrwHilEX0ck@builder.lan \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=bhupesh.linux@gmail.com \
    --cc=bhupesh.sharma@linaro.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    --subject='Re: [PATCH v2 05/10] regulator: qcom-rpmh: Cleanup terminator line commas' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).