* [BlueZ PATCH v7 1/4] doc: Add errors.txt to describe errors of D-Bus method returns
2021-09-30 22:37 [BlueZ PATCH v7 0/4] Detailed error string Miao-chen Chou
@ 2021-09-30 22:37 ` Miao-chen Chou
2021-09-30 22:37 ` [BlueZ PATCH v7 2/4] error: BR/EDR and LE connection failure reasons Miao-chen Chou
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Miao-chen Chou @ 2021-09-30 22:37 UTC (permalink / raw)
To: Bluetooth Kernel Mailing List
Cc: Luiz Augusto von Dentz, Howard Chung, Alain Michaud,
Marcel Holtmann, Miao-chen Chou
---
(no changes since v5)
Changes in v5:
- Remove the use of error codes.
doc/errors.txt | 233 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 233 insertions(+)
create mode 100644 doc/errors.txt
diff --git a/doc/errors.txt b/doc/errors.txt
new file mode 100644
index 000000000..047610c74
--- /dev/null
+++ b/doc/errors.txt
@@ -0,0 +1,233 @@
+D-Bus Method Return Error Codes
+===============================
+
+The motivation of having detailed error is to provide context-based failure
+reasons along with D-Bus method return so that D-Bus clients can build metrics
+and optimize their application based on these failure reasons. For instance, a
+client can build retry mechanism for a connection failure or improve the
+bottleneck of use scenario based on actionable metrics.
+
+These error codes are context-based but not necessarily tied to interface or
+method calls. For instance, if a pairing request failed due to connection
+failure, connection error would be attached to the method return of Pair().
+
+BR/EDR connection already connected
+===================================
+ errno: EALREADY, EISCONN
+
+ Either the profile is already connected or ACL connection is in place.
+
+BR/EDR connection page timeout
+==============================
+ errno: EHOSTDOWN
+
+ Failed due to page timeout.
+
+BR/EDR connection profile unavailable
+=====================================
+ errno: ENOPROTOOPT
+
+ Failed to find connectable services or the target service.
+
+BR/EDR connection SDP search
+============================
+ errno: none
+
+ Failed to complete the SDP search.
+
+BR/EDR connection create socket
+===============================
+ errno: EIO
+
+ Failed to create or connect to BT IO socket. This can also indicate
+ hardware failure in the controller.
+
+BR/EDR connection invalid arguments
+===================================
+ errno: EHOSTUNREACH
+
+ Failed due to invalid arguments.
+
+BR/EDR connection not powered
+=============================
+ errno: EHOSTUNREACH
+
+ Failed due to adapter not powered.
+
+BR/EDR connection not supported
+===============================
+ errno: EOPNOTSUPP, EPROTONOSUPPORT
+
+ Failed due to unsupported state transition of L2CAP channel or other
+ features either by the local host or the remote.
+
+BR/EDR connection bad socket
+============================
+ errno: EBADFD
+
+ Failed due to the socket is in bad state.
+
+BR/EDR connection memory allocation
+===================================
+ errno: ENOMEM
+
+ Failed to allocate memory in either host stack or controller.
+
+BR/EDR connection busy
+======================
+ errno: EBUSY
+
+ Failed due to other ongoing operations, such as pairing, busy L2CAP
+ channel or the operation disallowed by the controller.
+
+BR/EDR connection concurrent connection limit
+=============================================
+ errno: EMLINK
+
+ Failed due to reaching the concurrent connection limit to a device.
+
+BR/EDR connection timeout
+=========================
+ errno: ETIMEDOUT
+
+ Failed due to connection timeout
+
+BR/EDR connection refused
+=========================
+ errno: ECONNREFUSED
+
+ Refused by the remote device due to limited resource, security reason
+ or unacceptable address type.
+
+BR/EDR connection aborted by remote
+===================================
+ errno: ECONNRESET
+
+ Terminated by the remote device due to limited resource or power off.
+
+BR/EDR connection aborted by local
+==================================
+ errno: ECONNABORTED
+
+ Aborted by the local host.
+
+BR/EDR connection LMP protocol error
+====================================
+ errno: EPROTO
+
+ Failed due to LMP protocol error.
+
+BR/EDR connection canceled
+==========================
+ errno: none
+
+ Failed due to cancellation caused by adapter drop, unexpected device
+ drop, orincoming disconnection request before connection request is
+ completed.
+
+BR/EDR connection unknown error
+===============================
+ errno: ENOSYS
+
+ Failed due to unknown reason.
+
+LE connection invalid arguments
+===============================
+ errno: EINVAL
+
+ Failed due to invalid arguments.
+
+LE connection not powered
+=========================
+ errno: EHOSTUNREACH
+
+ Failed due to adapter not powered.
+
+LE connection not supported
+===========================
+ errno: EOPNOTSUPP, EPROTONOSUPPORT
+
+ Failed due to unsupported state transition of L2CAP channel or other
+ features (e.g. LE features) either by the local host or the remote.
+
+LE connection already connected
+===============================
+ errno: EALREADY, EISCONN
+
+ Either the BT IO is already connected or LE link connection in place.
+
+LE connection bad socket
+========================
+ errno: EBADFD
+
+ Failed due to the socket is in bad state.
+
+LE connection memory allocation
+===============================
+ errno: ENOMEM
+
+ Failed to allocate memory in either host stack or controller.
+
+LE connection busy
+==================
+ errno: EBUSY
+
+ Failed due to other ongoing operations, such as pairing, connecting,
+ busy L2CAP channel or the operation disallowed by the controller.
+
+LE connection refused
+=====================
+ errno: ECONNREFUSED
+
+ Failed due to that LE is not enabled or the attempt is refused by the
+ remote device due to limited resource, security reason or unacceptable
+ address type.
+
+LE connection create socket
+===========================
+ errno: EIO
+
+ Failed to create or connect to BT IO socket. This can also indicate
+ hardware failure in the controller.
+
+LE connection timeout
+=====================
+ errno: ETIMEDOUT
+
+ Failed due to connection timeout
+
+LE connection concurrent connection limit
+=========================================
+ errno: EMLINK
+
+ Failed due to reaching the synchronous connection limit to a device.
+
+LE connection abort by remote
+=============================
+ errno: ECONNRESET
+
+ Aborted by the remote device due to limited resource or power off.
+
+LE connection abort by local
+============================
+ errno: ECONNABORTED
+
+ Aborted by the local host.
+
+LE connection link layer protocol error
+=======================================
+ errno: EPROTO
+
+ Failed due to link layer protocol error.
+
+LE connection GATT browsing
+===========================
+ errno: none
+
+ Failed to complete the GATT browsing.
+
+LE connection unknown error
+===========================
+ errno: ENOSYS
+
+ Failed due to unknown reason.
--
2.33.0.800.g4c38ced690-goog
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [BlueZ PATCH v7 2/4] error: BR/EDR and LE connection failure reasons
2021-09-30 22:37 [BlueZ PATCH v7 0/4] Detailed error string Miao-chen Chou
2021-09-30 22:37 ` [BlueZ PATCH v7 1/4] doc: Add errors.txt to describe errors of D-Bus method returns Miao-chen Chou
@ 2021-09-30 22:37 ` Miao-chen Chou
2021-09-30 22:37 ` [BlueZ PATCH v7 3/4] device: Include detailed error string in Connect() return Miao-chen Chou
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Miao-chen Chou @ 2021-09-30 22:37 UTC (permalink / raw)
To: Bluetooth Kernel Mailing List
Cc: Luiz Augusto von Dentz, Howard Chung, Alain Michaud,
Marcel Holtmann, Miao-chen Chou
The source of Connect() failures can be divided into the following
three.
- bluetoothd's device interface state transition and profile state
transition
- Kernel's L2CAP layer state transition
- Potential HCI error codes returned by the remote device
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Howard Chung <howardchung@google.com>
---
Changes in v7:
- Fix nits.
Changes in v6:
- Rephrase error strings.
Changes in v5:
- Replace uint16_t error code with string
Changes in v4:
- Address make errors
Changes in v3:
- Separate error-code.txt into its own commit
Changes in v2:
- Add error-code.txt
- Remove BtdError from return string
src/error.c | 100 ++++++++++++++++++++++++++++++++++++++++++++++++++++
src/error.h | 57 ++++++++++++++++++++++++++++++
2 files changed, 157 insertions(+)
diff --git a/src/error.c b/src/error.c
index dd85cd288..29c071067 100644
--- a/src/error.c
+++ b/src/error.c
@@ -14,6 +14,8 @@
#include <config.h>
#endif
+#include <errno.h>
+#include <stdio.h>
#include "gdbus/gdbus.h"
#include "error.h"
@@ -66,12 +68,24 @@ DBusMessage *btd_error_in_progress(DBusMessage *msg)
"In Progress");
}
+DBusMessage *btd_error_in_progress_str(DBusMessage *msg, const char *str)
+{
+ return g_dbus_create_error(msg, ERROR_INTERFACE ".InProgress",
+ "%s", str);
+}
+
DBusMessage *btd_error_not_available(DBusMessage *msg)
{
return g_dbus_create_error(msg, ERROR_INTERFACE ".NotAvailable",
"Operation currently not available");
}
+DBusMessage *btd_error_not_available_str(DBusMessage *msg, const char *str)
+{
+ return g_dbus_create_error(msg, ERROR_INTERFACE ".NotAvailable",
+ "%s", str);
+}
+
DBusMessage *btd_error_does_not_exist(DBusMessage *msg)
{
return g_dbus_create_error(msg, ERROR_INTERFACE ".DoesNotExist",
@@ -108,8 +122,94 @@ DBusMessage *btd_error_not_ready(DBusMessage *msg)
"Resource Not Ready");
}
+DBusMessage *btd_error_not_ready_str(DBusMessage *msg, const char *str)
+{
+ return g_dbus_create_error(msg, ERROR_INTERFACE ".NotReady",
+ "%s", str);
+}
+
DBusMessage *btd_error_failed(DBusMessage *msg, const char *str)
{
return g_dbus_create_error(msg, ERROR_INTERFACE
".Failed", "%s", str);
}
+
+const char *btd_error_bredr_conn_from_errno(int errno_code)
+{
+ switch (-errno_code) {
+ case EALREADY:
+ case EISCONN:
+ return ERR_BREDR_CONN_ALREADY_CONNECTED;
+ case EHOSTDOWN:
+ return ERR_BREDR_CONN_PAGE_TIMEOUT;
+ case ENOPROTOOPT:
+ return ERR_BREDR_CONN_PROFILE_UNAVAILABLE;
+ case EIO:
+ return ERR_BREDR_CONN_CREATE_SOCKET;
+ case EINVAL:
+ return ERR_BREDR_CONN_INVALID_ARGUMENTS;
+ case EHOSTUNREACH:
+ return ERR_BREDR_CONN_ADAPTER_NOT_POWERED;
+ case EOPNOTSUPP:
+ case EPROTONOSUPPORT:
+ return ERR_BREDR_CONN_NOT_SUPPORTED;
+ case EBADFD:
+ return ERR_BREDR_CONN_BAD_SOCKET;
+ case ENOMEM:
+ return ERR_BREDR_CONN_MEMORY_ALLOC;
+ case EBUSY:
+ return ERR_BREDR_CONN_BUSY;
+ case EMLINK:
+ return ERR_BREDR_CONN_CNCR_CONNECT_LIMIT;
+ case ETIMEDOUT:
+ return ERR_BREDR_CONN_TIMEOUT;
+ case ECONNREFUSED:
+ return ERR_BREDR_CONN_REFUSED;
+ case ECONNRESET:
+ return ERR_BREDR_CONN_ABORT_BY_REMOTE;
+ case ECONNABORTED:
+ return ERR_BREDR_CONN_ABORT_BY_LOCAL;
+ case EPROTO:
+ return ERR_BREDR_CONN_LMP_PROTO_ERROR;
+ default:
+ return ERR_BREDR_CONN_UNKNOWN;
+ }
+}
+
+const char *btd_error_le_conn_from_errno(int errno_code)
+{
+ switch (-errno_code) {
+ case EINVAL:
+ return ERR_LE_CONN_INVALID_ARGUMENTS;
+ case EHOSTUNREACH:
+ return ERR_LE_CONN_ADAPTER_NOT_POWERED;
+ case EOPNOTSUPP:
+ case EPROTONOSUPPORT:
+ return ERR_LE_CONN_NOT_SUPPORTED;
+ case EALREADY:
+ case EISCONN:
+ return ERR_LE_CONN_ALREADY_CONNECTED;
+ case EBADFD:
+ return ERR_LE_CONN_BAD_SOCKET;
+ case ENOMEM:
+ return ERR_LE_CONN_MEMORY_ALLOC;
+ case EBUSY:
+ return ERR_LE_CONN_BUSY;
+ case ECONNREFUSED:
+ return ERR_LE_CONN_REFUSED;
+ case EIO:
+ return ERR_LE_CONN_CREATE_SOCKET;
+ case ETIMEDOUT:
+ return ERR_LE_CONN_TIMEOUT;
+ case EMLINK:
+ return ERR_LE_CONN_SYNC_CONNECT_LIMIT;
+ case ECONNRESET:
+ return ERR_LE_CONN_ABORT_BY_REMOTE;
+ case ECONNABORTED:
+ return ERR_LE_CONN_ABORT_BY_LOCAL;
+ case EPROTO:
+ return ERR_LE_CONN_LL_PROTO_ERROR;
+ default:
+ return ERR_LE_CONN_UNKNOWN;
+ }
+}
diff --git a/src/error.h b/src/error.h
index 7fcddaf4a..dded9f93d 100644
--- a/src/error.h
+++ b/src/error.h
@@ -11,9 +11,60 @@
*/
#include <dbus/dbus.h>
+#include <stdint.h>
#define ERROR_INTERFACE "org.bluez.Error"
+/* BR/EDR connection failure reasons */
+#define ERR_BREDR_CONN_ALREADY_CONNECTED "br-connection-already-"\
+ "connected"
+#define ERR_BREDR_CONN_PAGE_TIMEOUT "br-connection-page-timeout"
+#define ERR_BREDR_CONN_PROFILE_UNAVAILABLE "br-connection-profile-"\
+ "unavailable"
+#define ERR_BREDR_CONN_SDP_SEARCH "br-connection-sdp-search"
+#define ERR_BREDR_CONN_CREATE_SOCKET "br-connection-create-socket"
+#define ERR_BREDR_CONN_INVALID_ARGUMENTS "br-connection-invalid-"\
+ "argument"
+#define ERR_BREDR_CONN_ADAPTER_NOT_POWERED "br-connection-adapter-not-"\
+ "powered"
+#define ERR_BREDR_CONN_NOT_SUPPORTED "br-connection-not-suuported"
+#define ERR_BREDR_CONN_BAD_SOCKET "br-connection-bad-socket"
+#define ERR_BREDR_CONN_MEMORY_ALLOC "br-connection-memory-"\
+ "allocation"
+#define ERR_BREDR_CONN_BUSY "br-connection-busy"
+#define ERR_BREDR_CONN_CNCR_CONNECT_LIMIT "br-connection-concurrent-"\
+ "connection-limit"
+#define ERR_BREDR_CONN_TIMEOUT "br-connection-timeout"
+#define ERR_BREDR_CONN_REFUSED "br-connection-refused"
+#define ERR_BREDR_CONN_ABORT_BY_REMOTE "br-connection-aborted-by-"\
+ "remote"
+#define ERR_BREDR_CONN_ABORT_BY_LOCAL "br-connection-aborted-by-"\
+ "local"
+#define ERR_BREDR_CONN_LMP_PROTO_ERROR "br-connection-lmp-protocol-"\
+ "error"
+#define ERR_BREDR_CONN_CANCELED "br-connection-canceled"
+#define ERR_BREDR_CONN_UNKNOWN "br-connection-unknown"
+
+/* LE connection failure reasons */
+#define ERR_LE_CONN_INVALID_ARGUMENTS "le-connection-invalid-arguments"
+#define ERR_LE_CONN_ADAPTER_NOT_POWERED "le-connection-adapter-not-powered"
+#define ERR_LE_CONN_NOT_SUPPORTED "le-connection-not-supported"
+#define ERR_LE_CONN_ALREADY_CONNECTED "le-connection-already-connected"
+#define ERR_LE_CONN_BAD_SOCKET "le-connection-bad-socket"
+#define ERR_LE_CONN_MEMORY_ALLOC "le-connection-memory-allocation"
+#define ERR_LE_CONN_BUSY "le-connection-busy"
+#define ERR_LE_CONN_REFUSED "le-connection-refused"
+#define ERR_LE_CONN_CREATE_SOCKET "le-connection-create-socket"
+#define ERR_LE_CONN_TIMEOUT "le-connection-timeout"
+#define ERR_LE_CONN_SYNC_CONNECT_LIMIT "le-connection-concurrent-connection-"\
+ "limit"
+#define ERR_LE_CONN_ABORT_BY_REMOTE "le-connection-abort-by-remote"
+#define ERR_LE_CONN_ABORT_BY_LOCAL "le-connection-abort-by-local"
+#define ERR_LE_CONN_LL_PROTO_ERROR "le-connection-link-layer-protocol-"\
+ "error"
+#define ERR_LE_CONN_GATT_BROWSE "le-connection-gatt-browsing"
+#define ERR_LE_CONN_UNKNOWN "le-connection-unknown"
+
DBusMessage *btd_error_invalid_args(DBusMessage *msg);
DBusMessage *btd_error_invalid_args_str(DBusMessage *msg, const char *str);
DBusMessage *btd_error_busy(DBusMessage *msg);
@@ -22,11 +73,17 @@ DBusMessage *btd_error_not_supported(DBusMessage *msg);
DBusMessage *btd_error_not_connected(DBusMessage *msg);
DBusMessage *btd_error_already_connected(DBusMessage *msg);
DBusMessage *btd_error_not_available(DBusMessage *msg);
+DBusMessage *btd_error_not_available_str(DBusMessage *msg, const char *str);
DBusMessage *btd_error_in_progress(DBusMessage *msg);
+DBusMessage *btd_error_in_progress_str(DBusMessage *msg, const char *str);
DBusMessage *btd_error_does_not_exist(DBusMessage *msg);
DBusMessage *btd_error_not_authorized(DBusMessage *msg);
DBusMessage *btd_error_not_permitted(DBusMessage *msg, const char *str);
DBusMessage *btd_error_no_such_adapter(DBusMessage *msg);
DBusMessage *btd_error_agent_not_available(DBusMessage *msg);
DBusMessage *btd_error_not_ready(DBusMessage *msg);
+DBusMessage *btd_error_not_ready_str(DBusMessage *msg, const char *str);
DBusMessage *btd_error_failed(DBusMessage *msg, const char *str);
+
+const char *btd_error_bredr_conn_from_errno(int errno_code);
+const char *btd_error_le_conn_from_errno(int errno_code);
--
2.33.0.800.g4c38ced690-goog
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [BlueZ PATCH v7 3/4] device: Include detailed error string in Connect() return
2021-09-30 22:37 [BlueZ PATCH v7 0/4] Detailed error string Miao-chen Chou
2021-09-30 22:37 ` [BlueZ PATCH v7 1/4] doc: Add errors.txt to describe errors of D-Bus method returns Miao-chen Chou
2021-09-30 22:37 ` [BlueZ PATCH v7 2/4] error: BR/EDR and LE connection failure reasons Miao-chen Chou
@ 2021-09-30 22:37 ` Miao-chen Chou
2021-09-30 22:37 ` [BlueZ PATCH v7 4/4] client: Print error code for connect methods Miao-chen Chou
2021-10-04 22:48 ` [BlueZ PATCH v7 0/4] Detailed error string Luiz Augusto von Dentz
4 siblings, 0 replies; 6+ messages in thread
From: Miao-chen Chou @ 2021-09-30 22:37 UTC (permalink / raw)
To: Bluetooth Kernel Mailing List
Cc: Luiz Augusto von Dentz, Howard Chung, Alain Michaud,
Marcel Holtmann, Miao-chen Chou
This replaces generic strerror message with context detailed error
string to better indicate the detailed failure reason so that the D-Bus
clients can optimize their application to work better with BlueZ, e.g.
introducing retry mechanism or building metrics.
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Howard Chung <howardchung@google.com>
---
(no changes since v5)
Changes in v5:
- Address the changes from error code to string
src/device.c | 46 ++++++++++++++++++++++++++++++----------------
1 file changed, 30 insertions(+), 16 deletions(-)
diff --git a/src/device.c b/src/device.c
index b29aa195d..230274ee1 100644
--- a/src/device.c
+++ b/src/device.c
@@ -1605,7 +1605,7 @@ void device_request_disconnect(struct btd_device *device, DBusMessage *msg)
if (device->connect) {
DBusMessage *reply = btd_error_failed(device->connect,
- "Cancelled");
+ ERR_BREDR_CONN_CANCELED);
g_dbus_send_message(dbus_conn, reply);
dbus_message_unref(device->connect);
device->connect = NULL;
@@ -1799,7 +1799,8 @@ done:
}
g_dbus_send_message(dbus_conn,
- btd_error_failed(dev->connect, strerror(-err)));
+ btd_error_failed(dev->connect,
+ btd_error_bredr_conn_from_errno(err)));
} else {
/* Start passive SDP discovery to update known services */
if (dev->bredr && !dev->svc_refreshed && dev->refresh_discovery)
@@ -2000,10 +2001,12 @@ static DBusMessage *connect_profiles(struct btd_device *dev, uint8_t bdaddr_type
dbus_message_get_sender(msg));
if (dev->pending || dev->connect || dev->browse)
- return btd_error_in_progress(msg);
+ return btd_error_in_progress_str(msg, ERR_BREDR_CONN_BUSY);
- if (!btd_adapter_get_powered(dev->adapter))
- return btd_error_not_ready(msg);
+ if (!btd_adapter_get_powered(dev->adapter)) {
+ return btd_error_not_ready_str(msg,
+ ERR_BREDR_CONN_ADAPTER_NOT_POWERED);
+ }
btd_device_set_temporary(dev, false);
@@ -2016,10 +2019,12 @@ static DBusMessage *connect_profiles(struct btd_device *dev, uint8_t bdaddr_type
if (dbus_message_is_method_call(msg, DEVICE_INTERFACE,
"Connect") &&
find_service_with_state(dev->services,
- BTD_SERVICE_STATE_CONNECTED))
+ BTD_SERVICE_STATE_CONNECTED)) {
return dbus_message_new_method_return(msg);
- else
- return btd_error_not_available(msg);
+ } else {
+ return btd_error_not_available_str(msg,
+ ERR_BREDR_CONN_PROFILE_UNAVAILABLE);
+ }
}
goto resolve_services;
@@ -2029,7 +2034,8 @@ static DBusMessage *connect_profiles(struct btd_device *dev, uint8_t bdaddr_type
if (err < 0) {
if (err == -EALREADY)
return dbus_message_new_method_return(msg);
- return btd_error_failed(msg, strerror(-err));
+ return btd_error_failed(msg,
+ btd_error_bredr_conn_from_errno(err));
}
dev->connect = dbus_message_ref(msg);
@@ -2043,8 +2049,10 @@ resolve_services:
err = device_browse_sdp(dev, msg);
else
err = device_browse_gatt(dev, msg);
- if (err < 0)
- return btd_error_failed(msg, strerror(-err));
+ if (err < 0) {
+ return btd_error_failed(msg, bdaddr_type == BDADDR_BREDR ?
+ ERR_BREDR_CONN_SDP_SEARCH : ERR_LE_CONN_GATT_BROWSE);
+ }
return NULL;
}
@@ -2154,8 +2162,10 @@ static DBusMessage *connect_profile(DBusConnection *conn, DBusMessage *msg,
DBusMessage *reply;
if (!dbus_message_get_args(msg, NULL, DBUS_TYPE_STRING, &pattern,
- DBUS_TYPE_INVALID))
- return btd_error_invalid_args(msg);
+ DBUS_TYPE_INVALID)) {
+ return btd_error_invalid_args_str(msg,
+ ERR_BREDR_CONN_INVALID_ARGUMENTS);
+ }
uuid = bt_name2string(pattern);
reply = connect_profiles(dev, BDADDR_BREDR, msg, uuid);
@@ -2538,7 +2548,10 @@ static void browse_request_complete(struct browse_req *req, uint8_t type,
if (err == 0)
goto done;
}
- reply = btd_error_failed(req->msg, strerror(-err));
+ reply = btd_error_failed(req->msg,
+ bdaddr_type == BDADDR_BREDR ?
+ btd_error_bredr_conn_from_errno(err) :
+ btd_error_le_conn_from_errno(err));
goto done;
}
@@ -3030,7 +3043,8 @@ void device_remove_connection(struct btd_device *device, uint8_t bdaddr_type)
*/
if (device->connect) {
DBG("connection removed while Connect() is waiting reply");
- reply = btd_error_failed(device->connect, "Disconnected early");
+ reply = btd_error_failed(device->connect,
+ ERR_BREDR_CONN_CANCELED);
g_dbus_send_message(dbus_conn, reply);
dbus_message_unref(device->connect);
device->connect = NULL;
@@ -5454,7 +5468,7 @@ done:
if (device->connect) {
if (err < 0)
reply = btd_error_failed(device->connect,
- strerror(-err));
+ btd_error_le_conn_from_errno(err));
else
reply = dbus_message_new_method_return(device->connect);
--
2.33.0.800.g4c38ced690-goog
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [BlueZ PATCH v7 4/4] client: Print error code for connect methods
2021-09-30 22:37 [BlueZ PATCH v7 0/4] Detailed error string Miao-chen Chou
` (2 preceding siblings ...)
2021-09-30 22:37 ` [BlueZ PATCH v7 3/4] device: Include detailed error string in Connect() return Miao-chen Chou
@ 2021-09-30 22:37 ` Miao-chen Chou
2021-10-04 22:48 ` [BlueZ PATCH v7 0/4] Detailed error string Luiz Augusto von Dentz
4 siblings, 0 replies; 6+ messages in thread
From: Miao-chen Chou @ 2021-09-30 22:37 UTC (permalink / raw)
To: Bluetooth Kernel Mailing List
Cc: Luiz Augusto von Dentz, Howard Chung, Alain Michaud,
Marcel Holtmann, Miao-chen Chou
The following steps were performed.
- Issuing repeated commands to connect the same BLE device.
- Verifying the print in bluetoothctl console
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Howard Chung <howardchung@google.com>
---
Changes in v7:
- Fix nits
Changes in v6:
- Rephrase error string
Changes in v5:
- Replace error code with error string
Changes in v4:
- Address make errors.
Changes in v3:
- Correct error-codes.txt.
Changes in v2:
- Add documentation for error codes
client/main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/client/main.c b/client/main.c
index c1a62edb7..61650c289 100644
--- a/client/main.c
+++ b/client/main.c
@@ -1966,7 +1966,8 @@ static void connect_reply(DBusMessage *message, void *user_data)
dbus_error_init(&error);
if (dbus_set_error_from_message(&error, message) == TRUE) {
- bt_shell_printf("Failed to connect: %s\n", error.name);
+ bt_shell_printf("Failed to connect: %s %s\n", error.name,
+ error.message);
dbus_error_free(&error);
return bt_shell_noninteractive_quit(EXIT_FAILURE);
}
--
2.33.0.800.g4c38ced690-goog
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [BlueZ PATCH v7 0/4] Detailed error string
2021-09-30 22:37 [BlueZ PATCH v7 0/4] Detailed error string Miao-chen Chou
` (3 preceding siblings ...)
2021-09-30 22:37 ` [BlueZ PATCH v7 4/4] client: Print error code for connect methods Miao-chen Chou
@ 2021-10-04 22:48 ` Luiz Augusto von Dentz
4 siblings, 0 replies; 6+ messages in thread
From: Luiz Augusto von Dentz @ 2021-10-04 22:48 UTC (permalink / raw)
To: Miao-chen Chou
Cc: Bluetooth Kernel Mailing List, Luiz Augusto von Dentz,
Howard Chung, Alain Michaud, Marcel Holtmann
Hi Miao,
On Thu, Sep 30, 2021 at 3:46 PM Miao-chen Chou <mcchou@chromium.org> wrote:
>
> Chromium OS has been working closely with Linux Bluetooth community to
> improve BlueZ stack, and there are increasing needs from applications
> building their features around Bluetooth. One of the major feedback
> from these application is the lack of the detailed failure reasons as
> return for D-Bus method call, and these failure reasons can be used in
> metrics, optimizing retry mechanism, hinting the reproduce scenario to
> improve BlueZ stack. The current org.bluez.Error.* are serving the
> generic errors well. However,g given org.bluez.Error.* errors are used
> across different interface context which does not serve the detailed
> failure reasons well. (See https://github.com/bluez/bluez/issues/131)
>
> Changes in v7:
> - Fix nits
>
> Changes in v6:
> - Rephrase error string
>
> Changes in v5:
> - Replace error code with error string
>
> Changes in v4:
> - Address make errors.
>
> Changes in v3:
> - Correct error-codes.txt.
>
> Changes in v2:
> - Add documentation for error codes
>
> Miao-chen Chou (4):
> Add errors.txt to describe errors of D-Bus method returns
> BR/EDR and LE connection failure reasons
> Include detailed error string in Connect() return
> Print error code for connect methods
>
> client/main.c | 3 +-
> doc/errors.txt | 233 +++++++++++++++++++++++++++++++++++++++++++++++++
> src/device.c | 46 ++++++----
> src/error.c | 100 +++++++++++++++++++++
> src/error.h | 57 ++++++++++++
> 5 files changed, 422 insertions(+), 17 deletions(-)
> create mode 100644 doc/errors.txt
>
> --
> 2.33.0.800.g4c38ced690-goog
Applied, thanks.
--
Luiz Augusto von Dentz
^ permalink raw reply [flat|nested] 6+ messages in thread