* [PATCH net v2 0/2] add support for skb with sk ref cloning
@ 2021-02-23 5:53 Oleksij Rempel
2021-02-23 5:53 ` [PATCH net v2 1/2] skbuff: skb_clone_sk_optional(): add function to always clone a skb and increase refcount on sk if valid Oleksij Rempel
2021-02-23 5:53 ` [PATCH net v2 2/2] can: fix ref count warning if socket was closed before skb was cloned Oleksij Rempel
0 siblings, 2 replies; 4+ messages in thread
From: Oleksij Rempel @ 2021-02-23 5:53 UTC (permalink / raw)
To: mkl, David S. Miller, Jakub Kicinski, Oliver Hartkopp,
Robin van der Gracht, Johannes Berg
Cc: Oleksij Rempel, kernel, linux-can, netdev, linux-kernel,
Eric Dumazet, linux-wireless
changes v2:
- drop mac80211 patch for now, it can go separately if needed
Hello,
this series tries to fix a long standing problem in the CAN echo SKB
handling. The problem shows up if an echo SKB for a SKB that references
an already closed socket is created.
It looks like the mac80211/tx.c has the same problem, see RFC patch 3
for details.
regards,
Oleksij
Oleksij Rempel (2):
skbuff: skb_clone_sk_optional(): add function to always clone a skb
and increase refcount on sk if valid
can: fix ref count warning if socket was closed before skb was cloned
include/linux/can/skb.h | 3 +--
include/linux/skbuff.h | 1 +
net/can/af_can.c | 6 +++---
net/can/j1939/main.c | 3 +--
net/can/j1939/socket.c | 3 +--
net/can/j1939/transport.c | 4 +---
net/core/skbuff.c | 27 +++++++++++++++++++++++++++
7 files changed, 35 insertions(+), 12 deletions(-)
--
2.29.2
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH net v2 1/2] skbuff: skb_clone_sk_optional(): add function to always clone a skb and increase refcount on sk if valid 2021-02-23 5:53 [PATCH net v2 0/2] add support for skb with sk ref cloning Oleksij Rempel @ 2021-02-23 5:53 ` Oleksij Rempel 2021-02-23 5:53 ` [PATCH net v2 2/2] can: fix ref count warning if socket was closed before skb was cloned Oleksij Rempel 1 sibling, 0 replies; 4+ messages in thread From: Oleksij Rempel @ 2021-02-23 5:53 UTC (permalink / raw) To: mkl, David S. Miller, Jakub Kicinski, Oliver Hartkopp, Robin van der Gracht, Johannes Berg Cc: Oleksij Rempel, kernel, linux-can, netdev, linux-kernel, Eric Dumazet, linux-wireless There already the function skb_clone_sk(), which clones the skb, but only if the sk is valid. There are several users in the networking stack, which always need a clone of a skb with the sk refcount incremented (but only if the sk is valid). This patch adds such a function. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- include/linux/skbuff.h | 1 + net/core/skbuff.c | 27 +++++++++++++++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 6d0a33d1c0db..99d552017508 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -3874,6 +3874,7 @@ static inline void skb_metadata_clear(struct sk_buff *skb) skb_metadata_set(skb, 0); } +struct sk_buff *skb_clone_sk_optional(struct sk_buff *skb); struct sk_buff *skb_clone_sk(struct sk_buff *skb); #ifdef CONFIG_NETWORK_PHY_TIMESTAMPING diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 545a472273a5..97341f173fb0 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -4671,6 +4671,33 @@ struct sk_buff *sock_dequeue_err_skb(struct sock *sk) } EXPORT_SYMBOL(sock_dequeue_err_skb); +/** + * skb_clone_sk_optional - create clone of skb, and take reference to socket if + * socket is referenced in original skb + * @skb: the skb to clone + * + * This function always creates a clone of a buffer. If it that holds a valid + * reference on sk_refcnt this is increased. + */ +struct sk_buff *skb_clone_sk_optional(struct sk_buff *skb) +{ + struct sock *sk = skb->sk; + struct sk_buff *clone; + + clone = skb_clone(skb, GFP_ATOMIC); + if (!clone) + return NULL; + + if (!sk || !refcount_inc_not_zero(&sk->sk_refcnt)) + return clone; + + clone->sk = sk; + clone->destructor = sock_efree; + + return clone; +} +EXPORT_SYMBOL(skb_clone_sk_optional); + /** * skb_clone_sk - create clone of skb, and take reference to socket * @skb: the skb to clone -- 2.29.2 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH net v2 2/2] can: fix ref count warning if socket was closed before skb was cloned 2021-02-23 5:53 [PATCH net v2 0/2] add support for skb with sk ref cloning Oleksij Rempel 2021-02-23 5:53 ` [PATCH net v2 1/2] skbuff: skb_clone_sk_optional(): add function to always clone a skb and increase refcount on sk if valid Oleksij Rempel @ 2021-02-23 5:53 ` Oleksij Rempel 2021-02-23 8:55 ` Eric Dumazet 1 sibling, 1 reply; 4+ messages in thread From: Oleksij Rempel @ 2021-02-23 5:53 UTC (permalink / raw) To: mkl, David S. Miller, Jakub Kicinski, Oliver Hartkopp, Robin van der Gracht, Johannes Berg Cc: Oleksij Rempel, Andre Naujoks, Eric Dumazet, kernel, linux-can, netdev, linux-kernel, linux-wireless There are two ref count variables controlling the free()ing of a socket: - struct sock::sk_refcnt - which is changed by sock_hold()/sock_put() - struct sock::sk_wmem_alloc - which accounts the memory allocated by the skbs in the send path. If the socket is closed the struct sock::sk_refcnt will finally reach 0 and sk_free() is called. Which then calls refcount_dec_and_test(&sk->sk_wmem_alloc). If sk_wmem_alloc reaches 0 the socket is actually free()ed. In case there are still TX skbs on the fly and the socket() is closed, the struct sock::sk_refcnt reaches 0. In the TX-path the CAN stack clones an "echo" skb, calls sock_hold() on the original socket and references it. This produces the following back trace: | WARNING: CPU: 0 PID: 280 at lib/refcount.c:25 refcount_warn_saturate+0x114/0x134 | refcount_t: addition on 0; use-after-free. | Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E) imx_vdoa(E) | CPU: 0 PID: 280 Comm: test_can.sh Tainted: G E 5.11.0-04577-gf8ff6603c617 #203 | Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) | Backtrace: | [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24) r7:00000000 r6:600f0113 r5:00000000 r4:81441220 | [<80bb0260>] (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8) | [<80bb589c>] (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019 r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90 | [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8) r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019 r4:80f4a8c2 | [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>] (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000 r6:82b44000 r5:834e5600 r4:83f4d540 | [<80528e7c>] (refcount_warn_saturate) from [<8079a4c8>] (__refcount_add.constprop.0+0x4c/0x50) | [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>] (can_put_echo_skb+0xb0/0x13c) | [<8079a4cc>] (can_put_echo_skb) from [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610 r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600 | [<8079b8d4>] (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70) r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000 r4:82ab1f00 | [<80969034>] (netdev_start_xmit) from [<809725a4>] (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00 r6:82b44000 r5:00000000 r4:834e5600 | [<80972408>] (dev_hard_start_xmit) from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600 r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600 r4:83f27400 | [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>] (__qdisc_run+0x4f0/0x534) To fix this problem, we have to take into account, that the socket technically still there but should not used (by any new skbs) any more. The function skb_clone_sk_optional() (introduced in the previous patch) takes care of this. It will only clone the skb, if the sk is set and the refcount has not reached 0. Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Andre Naujoks <nautsch2@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Fixes: 0ae89beb283a ("can: add destructor for self generated skbs") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- include/linux/can/skb.h | 3 +-- net/can/af_can.c | 6 +++--- net/can/j1939/main.c | 3 +-- net/can/j1939/socket.c | 3 +-- net/can/j1939/transport.c | 4 +--- 5 files changed, 7 insertions(+), 12 deletions(-) diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h index 685f34cfba20..bc1af38697a2 100644 --- a/include/linux/can/skb.h +++ b/include/linux/can/skb.h @@ -79,13 +79,12 @@ static inline struct sk_buff *can_create_echo_skb(struct sk_buff *skb) { struct sk_buff *nskb; - nskb = skb_clone(skb, GFP_ATOMIC); + nskb = skb_clone_sk_optional(skb); if (unlikely(!nskb)) { kfree_skb(skb); return NULL; } - can_skb_set_owner(nskb, skb->sk); consume_skb(skb); return nskb; } diff --git a/net/can/af_can.c b/net/can/af_can.c index cce2af10eb3e..9e1bd60e7e1b 100644 --- a/net/can/af_can.c +++ b/net/can/af_can.c @@ -251,20 +251,20 @@ int can_send(struct sk_buff *skb, int loop) * its own. Example: can_raw sockopt CAN_RAW_RECV_OWN_MSGS * Therefore we have to ensure that skb->sk remains the * reference to the originating sock by restoring skb->sk - * after each skb_clone() or skb_orphan() usage. + * after each skb_clone() or skb_orphan() usage - + * skb_clone_sk_optional() takes care of that. */ if (!(skb->dev->flags & IFF_ECHO)) { /* If the interface is not capable to do loopback * itself, we do it here. */ - newskb = skb_clone(skb, GFP_ATOMIC); + newskb = skb_clone_sk_optional(skb); if (!newskb) { kfree_skb(skb); return -ENOMEM; } - can_skb_set_owner(newskb, skb->sk); newskb->ip_summed = CHECKSUM_UNNECESSARY; newskb->pkt_type = PACKET_BROADCAST; } diff --git a/net/can/j1939/main.c b/net/can/j1939/main.c index da3a7a7bcff2..4f6852d48077 100644 --- a/net/can/j1939/main.c +++ b/net/can/j1939/main.c @@ -47,12 +47,11 @@ static void j1939_can_recv(struct sk_buff *iskb, void *data) * the header goes into sockaddr. * j1939 may not touch the incoming skb in such way */ - skb = skb_clone(iskb, GFP_ATOMIC); + skb = skb_clone_sk_optional(iskb); if (!skb) return; j1939_priv_get(priv); - can_skb_set_owner(skb, iskb->sk); /* get a pointer to the header of the skb * the skb payload (pointer) is moved, so that the next skb_data diff --git a/net/can/j1939/socket.c b/net/can/j1939/socket.c index 4e4a510d82f9..c1be6c26ff76 100644 --- a/net/can/j1939/socket.c +++ b/net/can/j1939/socket.c @@ -305,12 +305,11 @@ static void j1939_sk_recv_one(struct j1939_sock *jsk, struct sk_buff *oskb) if (!j1939_sk_recv_match_one(jsk, oskcb)) return; - skb = skb_clone(oskb, GFP_ATOMIC); + skb = skb_clone_sk_optional(oskb); if (!skb) { pr_warn("skb clone failed\n"); return; } - can_skb_set_owner(skb, oskb->sk); skcb = j1939_skb_to_cb(skb); skcb->msg_flags &= ~(MSG_DONTROUTE); diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c index e09d087ba240..e902557bbe17 100644 --- a/net/can/j1939/transport.c +++ b/net/can/j1939/transport.c @@ -1014,12 +1014,10 @@ static int j1939_simple_txnext(struct j1939_session *session) if (!se_skb) return 0; - skb = skb_clone(se_skb, GFP_ATOMIC); + skb = skb_clone_sk_optional(se_skb); if (!skb) return -ENOMEM; - can_skb_set_owner(skb, se_skb->sk); - j1939_tp_set_rxtimeout(session, J1939_SIMPLE_ECHO_TIMEOUT_MS); ret = j1939_send_one(priv, skb); -- 2.29.2 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH net v2 2/2] can: fix ref count warning if socket was closed before skb was cloned 2021-02-23 5:53 ` [PATCH net v2 2/2] can: fix ref count warning if socket was closed before skb was cloned Oleksij Rempel @ 2021-02-23 8:55 ` Eric Dumazet 0 siblings, 0 replies; 4+ messages in thread From: Eric Dumazet @ 2021-02-23 8:55 UTC (permalink / raw) To: Oleksij Rempel Cc: Marc Kleine-Budde, David S. Miller, Jakub Kicinski, Oliver Hartkopp, Robin van der Gracht, Johannes Berg, Andre Naujoks, kernel, linux-can, netdev, LKML, linux-wireless On Tue, Feb 23, 2021 at 6:53 AM Oleksij Rempel <o.rempel@pengutronix.de> wrote: > > There are two ref count variables controlling the free()ing of a socket: > - struct sock::sk_refcnt - which is changed by sock_hold()/sock_put() > - struct sock::sk_wmem_alloc - which accounts the memory allocated by > the skbs in the send path. > > If the socket is closed the struct sock::sk_refcnt will finally reach 0 > and sk_free() is called. Which then calls > refcount_dec_and_test(&sk->sk_wmem_alloc). If sk_wmem_alloc reaches 0 > the socket is actually free()ed. > > In case there are still TX skbs on the fly and the socket() is closed, > the struct sock::sk_refcnt reaches 0. In the TX-path the CAN stack > clones an "echo" skb, calls sock_hold() on the original socket and > references it. This produces the following back trace: Why not simply fix can_skb_set_owner() instead of adding yet another helper ? diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h index 685f34cfba20741d372d340fe7df1084767b2850..655f33aa99e330b8ffc804b0f3a1d61aa9b00b0b 100644 --- a/include/linux/can/skb.h +++ b/include/linux/can/skb.h @@ -65,8 +65,7 @@ static inline void can_skb_reserve(struct sk_buff *skb) static inline void can_skb_set_owner(struct sk_buff *skb, struct sock *sk) { - if (sk) { - sock_hold(sk); + if (sk && refcount_inc_not_zero(&sk->sk_refcnt)) { skb->destructor = sock_efree; skb->sk = sk; } IMO, CAN seems to use sock_hold() even for tx packets. But tx packets usually have a reference on sockets based on sk->sk_wmem_alloc , look at skb_set_owner_w() for reference. This might be the reason why you catch a zero sk_refcnt while packets are still in flight ? > | WARNING: CPU: 0 PID: 280 at lib/refcount.c:25 refcount_warn_saturate+0x114/0x134 > | refcount_t: addition on 0; use-after-free. > | Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E) imx_vdoa(E) > | CPU: 0 PID: 280 Comm: test_can.sh Tainted: G E 5.11.0-04577-gf8ff6603c617 #203 > | Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) > | Backtrace: > | [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24) r7:00000000 r6:600f0113 r5:00000000 r4:81441220 > | [<80bb0260>] (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8) > | [<80bb589c>] (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019 r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90 > | [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8) r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019 r4:80f4a8c2 > | [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>] (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000 r6:82b44000 r5:834e5600 r4:83f4d540 > | [<80528e7c>] (refcount_warn_saturate) from [<8079a4c8>] (__refcount_add.constprop.0+0x4c/0x50) > | [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>] (can_put_echo_skb+0xb0/0x13c) > | [<8079a4cc>] (can_put_echo_skb) from [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610 r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600 > | [<8079b8d4>] (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70) r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000 r4:82ab1f00 > | [<80969034>] (netdev_start_xmit) from [<809725a4>] (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00 r6:82b44000 r5:00000000 r4:834e5600 > | [<80972408>] (dev_hard_start_xmit) from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600 r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600 r4:83f27400 > | [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>] (__qdisc_run+0x4f0/0x534) > > To fix this problem, we have to take into account, that the socket > technically still there but should not used (by any new skbs) any more. > The function skb_clone_sk_optional() (introduced in the previous patch) > takes care of this. It will only clone the skb, if the sk is set and the > refcount has not reached 0. > > Cc: Oliver Hartkopp <socketcan@hartkopp.net> > Cc: Andre Naujoks <nautsch2@gmail.com> > Cc: Eric Dumazet <edumazet@google.com> > Fixes: 0ae89beb283a ("can: add destructor for self generated skbs") > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > --- > include/linux/can/skb.h | 3 +-- > net/can/af_can.c | 6 +++--- > net/can/j1939/main.c | 3 +-- > net/can/j1939/socket.c | 3 +-- > net/can/j1939/transport.c | 4 +--- > 5 files changed, 7 insertions(+), 12 deletions(-) > > diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h > index 685f34cfba20..bc1af38697a2 100644 > --- a/include/linux/can/skb.h > +++ b/include/linux/can/skb.h > @@ -79,13 +79,12 @@ static inline struct sk_buff *can_create_echo_skb(struct sk_buff *skb) > { > struct sk_buff *nskb; > > - nskb = skb_clone(skb, GFP_ATOMIC); > + nskb = skb_clone_sk_optional(skb); > if (unlikely(!nskb)) { > kfree_skb(skb); > return NULL; > } > > - can_skb_set_owner(nskb, skb->sk); > consume_skb(skb); > return nskb; > } > diff --git a/net/can/af_can.c b/net/can/af_can.c > index cce2af10eb3e..9e1bd60e7e1b 100644 > --- a/net/can/af_can.c > +++ b/net/can/af_can.c > @@ -251,20 +251,20 @@ int can_send(struct sk_buff *skb, int loop) > * its own. Example: can_raw sockopt CAN_RAW_RECV_OWN_MSGS > * Therefore we have to ensure that skb->sk remains the > * reference to the originating sock by restoring skb->sk > - * after each skb_clone() or skb_orphan() usage. > + * after each skb_clone() or skb_orphan() usage - > + * skb_clone_sk_optional() takes care of that. > */ > > if (!(skb->dev->flags & IFF_ECHO)) { > /* If the interface is not capable to do loopback > * itself, we do it here. > */ > - newskb = skb_clone(skb, GFP_ATOMIC); > + newskb = skb_clone_sk_optional(skb); > if (!newskb) { > kfree_skb(skb); > return -ENOMEM; > } > > - can_skb_set_owner(newskb, skb->sk); > newskb->ip_summed = CHECKSUM_UNNECESSARY; > newskb->pkt_type = PACKET_BROADCAST; > } > diff --git a/net/can/j1939/main.c b/net/can/j1939/main.c > index da3a7a7bcff2..4f6852d48077 100644 > --- a/net/can/j1939/main.c > +++ b/net/can/j1939/main.c > @@ -47,12 +47,11 @@ static void j1939_can_recv(struct sk_buff *iskb, void *data) > * the header goes into sockaddr. > * j1939 may not touch the incoming skb in such way > */ > - skb = skb_clone(iskb, GFP_ATOMIC); > + skb = skb_clone_sk_optional(iskb); > if (!skb) > return; > > j1939_priv_get(priv); > - can_skb_set_owner(skb, iskb->sk); > > /* get a pointer to the header of the skb > * the skb payload (pointer) is moved, so that the next skb_data > diff --git a/net/can/j1939/socket.c b/net/can/j1939/socket.c > index 4e4a510d82f9..c1be6c26ff76 100644 > --- a/net/can/j1939/socket.c > +++ b/net/can/j1939/socket.c > @@ -305,12 +305,11 @@ static void j1939_sk_recv_one(struct j1939_sock *jsk, struct sk_buff *oskb) > if (!j1939_sk_recv_match_one(jsk, oskcb)) > return; > > - skb = skb_clone(oskb, GFP_ATOMIC); > + skb = skb_clone_sk_optional(oskb); > if (!skb) { > pr_warn("skb clone failed\n"); > return; > } > - can_skb_set_owner(skb, oskb->sk); > > skcb = j1939_skb_to_cb(skb); > skcb->msg_flags &= ~(MSG_DONTROUTE); > diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c > index e09d087ba240..e902557bbe17 100644 > --- a/net/can/j1939/transport.c > +++ b/net/can/j1939/transport.c > @@ -1014,12 +1014,10 @@ static int j1939_simple_txnext(struct j1939_session *session) > if (!se_skb) > return 0; > > - skb = skb_clone(se_skb, GFP_ATOMIC); > + skb = skb_clone_sk_optional(se_skb); > if (!skb) > return -ENOMEM; > > - can_skb_set_owner(skb, se_skb->sk); > - > j1939_tp_set_rxtimeout(session, J1939_SIMPLE_ECHO_TIMEOUT_MS); > > ret = j1939_send_one(priv, skb); > -- > 2.29.2 > ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-02-23 8:57 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-02-23 5:53 [PATCH net v2 0/2] add support for skb with sk ref cloning Oleksij Rempel 2021-02-23 5:53 ` [PATCH net v2 1/2] skbuff: skb_clone_sk_optional(): add function to always clone a skb and increase refcount on sk if valid Oleksij Rempel 2021-02-23 5:53 ` [PATCH net v2 2/2] can: fix ref count warning if socket was closed before skb was cloned Oleksij Rempel 2021-02-23 8:55 ` Eric Dumazet
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).