* [PATCH AUTOSEL 4.14 2/4] can: sja1000: fix size of OCR_MODE_MASK define
[not found] <20221206095128.987873-1-sashal@kernel.org>
@ 2022-12-06 9:51 ` Sasha Levin
2022-12-06 9:51 ` [PATCH AUTOSEL 4.14 3/4] can: mcba_usb: Fix termination command argument Sasha Levin
1 sibling, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2022-12-06 9:51 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Heiko Schocher, Marc Kleine-Budde, Sasha Levin, wg, linux-can
From: Heiko Schocher <hs@denx.de>
[ Upstream commit 26e8f6a75248247982458e8237b98c9fb2ffcf9d ]
bitfield mode in ocr register has only 2 bits not 3, so correct
the OCR_MODE_MASK define.
Signed-off-by: Heiko Schocher <hs@denx.de>
Link: https://lore.kernel.org/all/20221123071636.2407823-1-hs@denx.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/can/platform/sja1000.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/can/platform/sja1000.h b/include/linux/can/platform/sja1000.h
index 5755ae5a4712..6a869682c120 100644
--- a/include/linux/can/platform/sja1000.h
+++ b/include/linux/can/platform/sja1000.h
@@ -14,7 +14,7 @@
#define OCR_MODE_TEST 0x01
#define OCR_MODE_NORMAL 0x02
#define OCR_MODE_CLOCK 0x03
-#define OCR_MODE_MASK 0x07
+#define OCR_MODE_MASK 0x03
#define OCR_TX0_INVERT 0x04
#define OCR_TX0_PULLDOWN 0x08
#define OCR_TX0_PULLUP 0x10
--
2.35.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH AUTOSEL 4.14 3/4] can: mcba_usb: Fix termination command argument
[not found] <20221206095128.987873-1-sashal@kernel.org>
2022-12-06 9:51 ` [PATCH AUTOSEL 4.14 2/4] can: sja1000: fix size of OCR_MODE_MASK define Sasha Levin
@ 2022-12-06 9:51 ` Sasha Levin
1 sibling, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2022-12-06 9:51 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yasushi SHOJI, Yasushi SHOJI, Marc Kleine-Budde, Sasha Levin, wg,
davem, edumazet, kuba, pabeni, mailhol.vincent, stefan.maetje,
socketcan, hbh25y, paskripkin, linux-can, netdev
From: Yasushi SHOJI <yasushi.shoji@gmail.com>
[ Upstream commit 1a8e3bd25f1e789c8154e11ea24dc3ec5a4c1da0 ]
Microchip USB Analyzer can activate the internal termination resistors
by setting the "termination" option ON, or OFF to to deactivate them.
As I've observed, both with my oscilloscope and captured USB packets
below, you must send "0" to turn it ON, and "1" to turn it OFF.
From the schematics in the user's guide, I can confirm that you must
drive the CAN_RES signal LOW "0" to activate the resistors.
Reverse the argument value of usb_msg.termination to fix this.
These are the two commands sequence, ON then OFF.
> No. Time Source Destination Protocol Length Info
> 1 0.000000 host 1.3.1 USB 46 URB_BULK out
>
> Frame 1: 46 bytes on wire (368 bits), 46 bytes captured (368 bits)
> USB URB
> Leftover Capture Data: a80000000000000000000000000000000000a8
>
> No. Time Source Destination Protocol Length Info
> 2 4.372547 host 1.3.1 USB 46 URB_BULK out
>
> Frame 2: 46 bytes on wire (368 bits), 46 bytes captured (368 bits)
> USB URB
> Leftover Capture Data: a80100000000000000000000000000000000a9
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Link: https://lore.kernel.org/all/20221124152504.125994-1-yashi@spacecubics.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/usb/mcba_usb.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c
index f7c3fc3dabfe..01ef5cabdc11 100644
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -58,6 +58,10 @@
#define MCBA_VER_REQ_USB 1
#define MCBA_VER_REQ_CAN 2
+/* Drive the CAN_RES signal LOW "0" to activate R24 and R25 */
+#define MCBA_VER_TERMINATION_ON 0
+#define MCBA_VER_TERMINATION_OFF 1
+
#define MCBA_SIDL_EXID_MASK 0x8
#define MCBA_DLC_MASK 0xf
#define MCBA_DLC_RTR_MASK 0x40
@@ -480,7 +484,7 @@ static void mcba_usb_process_ka_usb(struct mcba_priv *priv,
priv->usb_ka_first_pass = false;
}
- if (msg->termination_state)
+ if (msg->termination_state == MCBA_VER_TERMINATION_ON)
priv->can.termination = MCBA_TERMINATION_ENABLED;
else
priv->can.termination = MCBA_TERMINATION_DISABLED;
@@ -800,9 +804,9 @@ static int mcba_set_termination(struct net_device *netdev, u16 term)
};
if (term == MCBA_TERMINATION_ENABLED)
- usb_msg.termination = 1;
+ usb_msg.termination = MCBA_VER_TERMINATION_ON;
else
- usb_msg.termination = 0;
+ usb_msg.termination = MCBA_VER_TERMINATION_OFF;
mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg);
--
2.35.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH AUTOSEL 4.14 3/4] can: mcba_usb: Fix termination command argument
[not found] <20230629190225.908451-1-sashal@kernel.org>
@ 2023-06-29 19:02 ` Sasha Levin
0 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2023-06-29 19:02 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yasushi SHOJI, Yasushi SHOJI, Marc Kleine-Budde, Sasha Levin, wg,
davem, edumazet, kuba, pabeni, mailhol.vincent, socketcan,
linux-can, netdev
From: Yasushi SHOJI <yasushi.shoji@gmail.com>
[ Upstream commit 1a8e3bd25f1e789c8154e11ea24dc3ec5a4c1da0 ]
Microchip USB Analyzer can activate the internal termination resistors
by setting the "termination" option ON, or OFF to to deactivate them.
As I've observed, both with my oscilloscope and captured USB packets
below, you must send "0" to turn it ON, and "1" to turn it OFF.
From the schematics in the user's guide, I can confirm that you must
drive the CAN_RES signal LOW "0" to activate the resistors.
Reverse the argument value of usb_msg.termination to fix this.
These are the two commands sequence, ON then OFF.
> No. Time Source Destination Protocol Length Info
> 1 0.000000 host 1.3.1 USB 46 URB_BULK out
>
> Frame 1: 46 bytes on wire (368 bits), 46 bytes captured (368 bits)
> USB URB
> Leftover Capture Data: a80000000000000000000000000000000000a8
>
> No. Time Source Destination Protocol Length Info
> 2 4.372547 host 1.3.1 USB 46 URB_BULK out
>
> Frame 2: 46 bytes on wire (368 bits), 46 bytes captured (368 bits)
> USB URB
> Leftover Capture Data: a80100000000000000000000000000000000a9
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Link: https://lore.kernel.org/all/20221124152504.125994-1-yashi@spacecubics.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/can/usb/mcba_usb.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c
index f7c3fc3dabfe4..01ef5cabdc11e 100644
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -58,6 +58,10 @@
#define MCBA_VER_REQ_USB 1
#define MCBA_VER_REQ_CAN 2
+/* Drive the CAN_RES signal LOW "0" to activate R24 and R25 */
+#define MCBA_VER_TERMINATION_ON 0
+#define MCBA_VER_TERMINATION_OFF 1
+
#define MCBA_SIDL_EXID_MASK 0x8
#define MCBA_DLC_MASK 0xf
#define MCBA_DLC_RTR_MASK 0x40
@@ -480,7 +484,7 @@ static void mcba_usb_process_ka_usb(struct mcba_priv *priv,
priv->usb_ka_first_pass = false;
}
- if (msg->termination_state)
+ if (msg->termination_state == MCBA_VER_TERMINATION_ON)
priv->can.termination = MCBA_TERMINATION_ENABLED;
else
priv->can.termination = MCBA_TERMINATION_DISABLED;
@@ -800,9 +804,9 @@ static int mcba_set_termination(struct net_device *netdev, u16 term)
};
if (term == MCBA_TERMINATION_ENABLED)
- usb_msg.termination = 1;
+ usb_msg.termination = MCBA_VER_TERMINATION_ON;
else
- usb_msg.termination = 0;
+ usb_msg.termination = MCBA_VER_TERMINATION_OFF;
mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg);
--
2.39.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-06-29 19:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20221206095128.987873-1-sashal@kernel.org>
2022-12-06 9:51 ` [PATCH AUTOSEL 4.14 2/4] can: sja1000: fix size of OCR_MODE_MASK define Sasha Levin
2022-12-06 9:51 ` [PATCH AUTOSEL 4.14 3/4] can: mcba_usb: Fix termination command argument Sasha Levin
[not found] <20230629190225.908451-1-sashal@kernel.org>
2023-06-29 19:02 ` Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).