* [Patch v4 0/2] can: mcan: Add MCAN support for FSD SoC [not found] <CGME20221207100642epcas5p26c8f3f898ad8ac434092c702a788c0ff@epcas5p2.samsung.com> @ 2022-12-07 10:06 ` Vivek Yadav [not found] ` <CGME20221207100650epcas5p408d280e0e2d2d6acfb5e252e37f504b2@epcas5p4.samsung.com> [not found] ` <CGME20221207100700epcas5p408c436aaaf0edd215b54f36f500cd02c@epcas5p4.samsung.com> 0 siblings, 2 replies; 6+ messages in thread From: Vivek Yadav @ 2022-12-07 10:06 UTC (permalink / raw) To: rcsekar, krzysztof.kozlowski+dt, wg, mkl, davem, edumazet, kuba, pabeni, pankaj.dubey, ravi.patel, alim.akhtar, linux-fsd, robh+dt Cc: linux-can, netdev, linux-kernel, linux-arm-kernel, linux-samsung-soc, devicetree, aswani.reddy, sriranjani.p, Vivek Yadav Add support for MCAN instances present on the FSD platform. Vivek Yadav (2): can: m_can: Call the RAM init directly from m_can_chip_config arm64: dts: fsd: Add MCAN device node changes since v3: [PATCH v3 1/2] can: m_can: Move mram init to mcan device setup https://lore.kernel.org/lkml/20221122105455.39294-2-vivek.2311@samsung.com/ 1: Addressed review comment given by Marc Kleine-Budde a) Call the RAM init directly from m_can_chip_config. b) If we call m_can_init_ram() from m_can_chip_config(), then remove it from the tcan's tcan4x5x_init() functions, and from m_can_class_resume(). It should only be called once for open and once for resume. changes since v2: [PATCH v2 1/6] dt-bindings: Document the SYSREG specific compatibles found on FSD SoC link: https://lore.kernel.org/lkml/20221109100928.109478-2-vivek.2311@samsung.com/ 1: Addressed review comment given by Krzysztof Kozlowski a) As per suggestion separated this patch and posted separately. ref: https://www.spinics.net/lists/kernel/msg4597970.html [PATCH v2 2/6] dt-bindings: can: mcan: Add ECC functionality to message ram link: https://lore.kernel.org/lkml/20221109100928.109478-3-vivek.2311@samsung.com/ 1: Addressed review comment given by Krzysztof Kozlowski a) For now I am dropping this. I will reconsider the implementation and will resend as separate patch. [PATCH v2 3/6] arm64: dts: fsd: add sysreg device node link: https://lore.kernel.org/lkml/20221109100928.109478-4-vivek.2311@samsung.com/ 1: Addressed review comment given by Krzysztof Kozlowski a) Dropped Cc from commit message. b) As per suggestion separated this and corresponding DT-bindin patch and posted separately. ref: https://www.spinics.net/lists/kernel/msg4597921.html [PATCH v2 4/6] arm64: dts: fsd: Add MCAN device node link: https://lore.kernel.org/lkml/20221109100928.109478-5-vivek.2311@samsung.com/ 1: Addressed review comment given by Krzysztof Kozlowski a) Aligned the lines. [PATCH v2 5/6] can: m_can: Add ECC functionality for message RAM link: https://lore.kernel.org/lkml/20221109100928.109478-6-vivek.2311@samsung.com/ 1: Addressed review comment given by Krzysztof Kozlowski a) We are dropping this for now and will reconsider it's implementation and resend as separate patch. [PATCH v2 6/6] arm64: dts: fsd: Add support for error correction code for message RAM link: https://lore.kernel.org/lkml/20221109100928.109478-7-vivek.2311@samsung.com/ 1: Addressed review comment given by Krzysztof Kozlowski a) Subject is updated and patch go via ARM SOC tree, we will resend this as separate patch along with ECC patch. changes since v1: [PATCH 0/7] can: mcan: Add MCAN support for FSD SoC 1: Addressed review comment given by Marc Kleine-Budde a) Added my signed off. [PATCH 2/7] dt-bindings: can: mcan: Add ECC functionality to message ram link: https://lore.kernel.org/netdev/87k04oxsvb.fsf@hardanger.blackshift.org/ 1: Addressed review comment given by Marc Kleine-Budde a) Added an example to the yaml that makes use of the mram-ecc-cfg property. b) Added prefix to "mram-ecc-cfg" property and "$ref: /schemas/types.yaml#/definitions/phandle". [PATCH 4/7] can: mcan: enable peripheral clk to access mram link: https://lore.kernel.org/netdev/20221021095833.62406-5-vivek.2311@samsung.com/ 1: Addressed review comment given by Marc Kleine-Budde a) Moved mram init into m_can_dev_setup function by then clocks are enabled and prevent probe failure. b) Added the platform init ops in m_can_plat_ops and moved mram init into it. [PATCH 5/7] arm64: dts: fsd: Add MCAN device node link: https://lore.kernel.org/netdev/20221021095833.62406-6-vivek.2311@samsung.com/ 1: Addressed review comment given by Marc Kleine-Budde a) Added the DT people on Cc. [PATCH 6/7] can: m_can: Add ECC functionality for message RAM link: https://lore.kernel.org/netdev/20221021095833.62406-7-vivek.2311@samsung.com/ 1: Addressed review comment given by kernel test robot. a) Addressed missing prototypes warnings. 2: Addressed review comment given by Marc Kleine-Budde a) Sorted the declaration of local variable by reverse Christmas tree. b) Used syscon_regmap_lookup_by_phandle_args to get the syscon Base Address and offset. c) Used FIELD_PREP instead of logical operation. d) Used regmap_read_poll_timeout API to give timeout condition for ECC cfg done status instead of using while loop counter. e) Moved all the ECC mcaros in m_can.c file and changed the name with a common prefix M_CAN. f) Moved ECC init into platform init function called during m_can device setup. arch/arm64/boot/dts/tesla/fsd-evb.dts | 16 +++++ arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi | 28 +++++++++ arch/arm64/boot/dts/tesla/fsd.dtsi | 68 ++++++++++++++++++++++ drivers/net/can/m_can/m_can.c | 32 ++++++++-- drivers/net/can/m_can/m_can_platform.c | 4 -- drivers/net/can/m_can/tcan4x5x-core.c | 5 -- 6 files changed, 138 insertions(+), 15 deletions(-) -- 2.17.1 ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <CGME20221207100650epcas5p408d280e0e2d2d6acfb5e252e37f504b2@epcas5p4.samsung.com>]
* [Patch v4 1/2] can: m_can: Call the RAM init directly from m_can_chip_config [not found] ` <CGME20221207100650epcas5p408d280e0e2d2d6acfb5e252e37f504b2@epcas5p4.samsung.com> @ 2022-12-07 10:06 ` Vivek Yadav 2022-12-08 9:12 ` Marc Kleine-Budde 0 siblings, 1 reply; 6+ messages in thread From: Vivek Yadav @ 2022-12-07 10:06 UTC (permalink / raw) To: rcsekar, krzysztof.kozlowski+dt, wg, mkl, davem, edumazet, kuba, pabeni, pankaj.dubey, ravi.patel, alim.akhtar, linux-fsd, robh+dt Cc: linux-can, netdev, linux-kernel, linux-arm-kernel, linux-samsung-soc, devicetree, aswani.reddy, sriranjani.p, Vivek Yadav When we try to access the mcan message ram addresses during the probe, hclk is gated by any other drivers or disabled, because of that probe gets failed. Move the mram init functionality to mcan chip config called by m_can_start from mcan open function, by that time clocks are enabled. Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Vivek Yadav <vivek.2311@samsung.com> --- drivers/net/can/m_can/m_can.c | 32 +++++++++++++++++++++----- drivers/net/can/m_can/m_can_platform.c | 4 ---- drivers/net/can/m_can/tcan4x5x-core.c | 5 ---- 3 files changed, 26 insertions(+), 15 deletions(-) diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index a776cab1a5a4..2261d01324f8 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -1233,10 +1233,17 @@ static int m_can_set_bittiming(struct net_device *dev) * - setup bittiming * - configure timestamp generation */ -static void m_can_chip_config(struct net_device *dev) +static int m_can_chip_config(struct net_device *dev) { struct m_can_classdev *cdev = netdev_priv(dev); u32 cccr, test; + int err; + + err = m_can_init_ram(cdev); + if (err) { + dev_err(cdev->dev, "Message RAM configuration failed\n"); + return err; + } m_can_config_endisable(cdev, true); @@ -1360,18 +1367,25 @@ static void m_can_chip_config(struct net_device *dev) if (cdev->ops->init) cdev->ops->init(cdev); + + return 0; } -static void m_can_start(struct net_device *dev) +static int m_can_start(struct net_device *dev) { struct m_can_classdev *cdev = netdev_priv(dev); + int ret; /* basic m_can configuration */ - m_can_chip_config(dev); + ret = m_can_chip_config(dev); + if (ret) + return ret; cdev->can.state = CAN_STATE_ERROR_ACTIVE; m_can_enable_all_interrupts(cdev); + + return 0; } static int m_can_set_mode(struct net_device *dev, enum can_mode mode) @@ -1799,7 +1813,9 @@ static int m_can_open(struct net_device *dev) } /* start the m_can controller */ - m_can_start(dev); + err = m_can_start(dev); + if (err) + goto exit_irq_fail; if (!cdev->is_peripheral) napi_enable(&cdev->napi); @@ -2058,9 +2074,13 @@ int m_can_class_resume(struct device *dev) ret = m_can_clk_start(cdev); if (ret) return ret; + ret = m_can_start(ndev); + if (ret) { + m_can_clk_stop(cdev); + + return ret; + } - m_can_init_ram(cdev); - m_can_start(ndev); netif_device_attach(ndev); netif_start_queue(ndev); } diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c index b5a5bedb3116..9c1dcf838006 100644 --- a/drivers/net/can/m_can/m_can_platform.c +++ b/drivers/net/can/m_can/m_can_platform.c @@ -140,10 +140,6 @@ static int m_can_plat_probe(struct platform_device *pdev) platform_set_drvdata(pdev, mcan_class); - ret = m_can_init_ram(mcan_class); - if (ret) - goto probe_fail; - pm_runtime_enable(mcan_class->dev); ret = m_can_class_register(mcan_class); if (ret) diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c index 41645a24384c..a3aeb83de152 100644 --- a/drivers/net/can/m_can/tcan4x5x-core.c +++ b/drivers/net/can/m_can/tcan4x5x-core.c @@ -234,11 +234,6 @@ static int tcan4x5x_init(struct m_can_classdev *cdev) if (ret) return ret; - /* Zero out the MCAN buffers */ - ret = m_can_init_ram(cdev); - if (ret) - return ret; - ret = regmap_update_bits(tcan4x5x->regmap, TCAN4X5X_CONFIG, TCAN4X5X_MODE_SEL_MASK, TCAN4X5X_MODE_NORMAL); if (ret) -- 2.17.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [Patch v4 1/2] can: m_can: Call the RAM init directly from m_can_chip_config 2022-12-07 10:06 ` [Patch v4 1/2] can: m_can: Call the RAM init directly from m_can_chip_config Vivek Yadav @ 2022-12-08 9:12 ` Marc Kleine-Budde 0 siblings, 0 replies; 6+ messages in thread From: Marc Kleine-Budde @ 2022-12-08 9:12 UTC (permalink / raw) To: Vivek Yadav Cc: rcsekar, krzysztof.kozlowski+dt, wg, davem, edumazet, kuba, pabeni, pankaj.dubey, ravi.patel, alim.akhtar, linux-fsd, robh+dt, linux-can, netdev, linux-kernel, linux-arm-kernel, linux-samsung-soc, devicetree, aswani.reddy, sriranjani.p [-- Attachment #1: Type: text/plain, Size: 786 bytes --] On 07.12.2022 15:36:31, Vivek Yadav wrote: > When we try to access the mcan message ram addresses during the probe, > hclk is gated by any other drivers or disabled, because of that probe > gets failed. > > Move the mram init functionality to mcan chip config called by > m_can_start from mcan open function, by that time clocks are > enabled. > > Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> > Signed-off-by: Vivek Yadav <vivek.2311@samsung.com> Applied to linux-can-next. Thanks, Marc -- Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung West/Dortmund | Phone: +49-231-2826-924 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <CGME20221207100700epcas5p408c436aaaf0edd215b54f36f500cd02c@epcas5p4.samsung.com>]
* [Patch v4 2/2] arm64: dts: fsd: Add MCAN device node [not found] ` <CGME20221207100700epcas5p408c436aaaf0edd215b54f36f500cd02c@epcas5p4.samsung.com> @ 2022-12-07 10:06 ` Vivek Yadav 2022-12-07 11:10 ` Krzysztof Kozlowski 2022-12-07 11:11 ` (subset) " Krzysztof Kozlowski 0 siblings, 2 replies; 6+ messages in thread From: Vivek Yadav @ 2022-12-07 10:06 UTC (permalink / raw) To: rcsekar, krzysztof.kozlowski+dt, wg, mkl, davem, edumazet, kuba, pabeni, pankaj.dubey, ravi.patel, alim.akhtar, linux-fsd, robh+dt Cc: linux-can, netdev, linux-kernel, linux-arm-kernel, linux-samsung-soc, devicetree, aswani.reddy, sriranjani.p, Vivek Yadav Add MCAN device node and enable the same for FSD platform. This also adds the required pin configuration for the same. Signed-off-by: Sriranjani P <sriranjani.p@samsung.com> Signed-off-by: Vivek Yadav <vivek.2311@samsung.com> --- arch/arm64/boot/dts/tesla/fsd-evb.dts | 16 +++++ arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi | 28 +++++++++ arch/arm64/boot/dts/tesla/fsd.dtsi | 68 ++++++++++++++++++++++ 3 files changed, 112 insertions(+) diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts b/arch/arm64/boot/dts/tesla/fsd-evb.dts index 1db6ddf03f01..af3862e9fe3b 100644 --- a/arch/arm64/boot/dts/tesla/fsd-evb.dts +++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts @@ -34,6 +34,22 @@ clock-frequency = <24000000>; }; +&m_can0 { + status = "okay"; +}; + +&m_can1 { + status = "okay"; +}; + +&m_can2 { + status = "okay"; +}; + +&m_can3 { + status = "okay"; +}; + &serial_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi index d0abb9aa0e9e..bb5289ebfef3 100644 --- a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi +++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi @@ -339,6 +339,34 @@ samsung,pin-pud = <FSD_PIN_PULL_UP>; samsung,pin-drv = <FSD_PIN_DRV_LV1>; }; + + m_can0_bus: m-can0-bus-pins { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV4>; + }; + + m_can1_bus: m-can1-bus-pins { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV4>; + }; + + m_can2_bus: m-can2-bus-pins { + samsung,pins = "gpd0-4", "gpd0-5"; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV4>; + }; + + m_can3_bus: m-can3-bus-pins { + samsung,pins = "gpd0-6", "gpd0-7"; + samsung,pin-function = <FSD_PIN_FUNC_2>; + samsung,pin-pud = <FSD_PIN_PULL_UP>; + samsung,pin-drv = <FSD_PIN_DRV_LV4>; + }; }; &pinctrl_pmu { diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi index f35bc5a288c2..dfdb32514887 100644 --- a/arch/arm64/boot/dts/tesla/fsd.dtsi +++ b/arch/arm64/boot/dts/tesla/fsd.dtsi @@ -755,6 +755,74 @@ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; }; + m_can0: can@14088000 { + compatible = "bosch,m_can"; + reg = <0x0 0x14088000 0x0 0x0200>, + <0x0 0x14080000 0x0 0x8000>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + pinctrl-names = "default"; + pinctrl-0 = <&m_can0_bus>; + clocks = <&clock_peric PERIC_MCAN0_IPCLKPORT_PCLK>, + <&clock_peric PERIC_MCAN0_IPCLKPORT_CCLK>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + m_can1: can@14098000 { + compatible = "bosch,m_can"; + reg = <0x0 0x14098000 0x0 0x0200>, + <0x0 0x14090000 0x0 0x8000>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + pinctrl-names = "default"; + pinctrl-0 = <&m_can1_bus>; + clocks = <&clock_peric PERIC_MCAN1_IPCLKPORT_PCLK>, + <&clock_peric PERIC_MCAN1_IPCLKPORT_CCLK>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + m_can2: can@140a8000 { + compatible = "bosch,m_can"; + reg = <0x0 0x140a8000 0x0 0x0200>, + <0x0 0x140a0000 0x0 0x8000>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + pinctrl-names = "default"; + pinctrl-0 = <&m_can2_bus>; + clocks = <&clock_peric PERIC_MCAN2_IPCLKPORT_PCLK>, + <&clock_peric PERIC_MCAN2_IPCLKPORT_CCLK>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + m_can3: can@140b8000 { + compatible = "bosch,m_can"; + reg = <0x0 0x140b8000 0x0 0x0200>, + <0x0 0x140b0000 0x0 0x8000>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + pinctrl-names = "default"; + pinctrl-0 = <&m_can3_bus>; + clocks = <&clock_peric PERIC_MCAN3_IPCLKPORT_PCLK>, + <&clock_peric PERIC_MCAN3_IPCLKPORT_CCLK>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + spi_0: spi@14140000 { compatible = "tesla,fsd-spi"; reg = <0x0 0x14140000 0x0 0x100>; -- 2.17.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [Patch v4 2/2] arm64: dts: fsd: Add MCAN device node 2022-12-07 10:06 ` [Patch v4 2/2] arm64: dts: fsd: Add MCAN device node Vivek Yadav @ 2022-12-07 11:10 ` Krzysztof Kozlowski 2022-12-07 11:11 ` (subset) " Krzysztof Kozlowski 1 sibling, 0 replies; 6+ messages in thread From: Krzysztof Kozlowski @ 2022-12-07 11:10 UTC (permalink / raw) To: Vivek Yadav, rcsekar, krzysztof.kozlowski+dt, wg, mkl, davem, edumazet, kuba, pabeni, pankaj.dubey, ravi.patel, alim.akhtar, linux-fsd, robh+dt Cc: linux-can, netdev, linux-kernel, linux-arm-kernel, linux-samsung-soc, devicetree, aswani.reddy, sriranjani.p On 07/12/2022 11:06, Vivek Yadav wrote: > Add MCAN device node and enable the same for FSD platform. > This also adds the required pin configuration for the same. > > Signed-off-by: Sriranjani P <sriranjani.p@samsung.com> > Signed-off-by: Vivek Yadav <vivek.2311@samsung.com> This is a friendly reminder during the review process. It looks like you received a tag and forgot to add it. If you do not know the process, here is a short explanation: Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for acks received on the version they apply. https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540 If a tag was not added on purpose, please state why and what changed. Applied for v6.3. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: (subset) [Patch v4 2/2] arm64: dts: fsd: Add MCAN device node 2022-12-07 10:06 ` [Patch v4 2/2] arm64: dts: fsd: Add MCAN device node Vivek Yadav 2022-12-07 11:10 ` Krzysztof Kozlowski @ 2022-12-07 11:11 ` Krzysztof Kozlowski 1 sibling, 0 replies; 6+ messages in thread From: Krzysztof Kozlowski @ 2022-12-07 11:11 UTC (permalink / raw) To: wg, pabeni, rcsekar, mkl, pankaj.dubey, edumazet, linux-fsd, krzysztof.kozlowski+dt, alim.akhtar, ravi.patel, robh+dt, Vivek Yadav, kuba, davem Cc: Krzysztof Kozlowski, linux-kernel, linux-arm-kernel, devicetree, sriranjani.p, linux-can, linux-samsung-soc, aswani.reddy, netdev On Wed, 7 Dec 2022 15:36:32 +0530, Vivek Yadav wrote: > Add MCAN device node and enable the same for FSD platform. > This also adds the required pin configuration for the same. > > Applied, thanks! [2/2] arm64: dts: fsd: Add MCAN device node https://git.kernel.org/krzk/linux/c/142c693e6bd63d8dfaf7f808b015fc46180af731 Best regards, -- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-12-08 9:14 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <CGME20221207100642epcas5p26c8f3f898ad8ac434092c702a788c0ff@epcas5p2.samsung.com> 2022-12-07 10:06 ` [Patch v4 0/2] can: mcan: Add MCAN support for FSD SoC Vivek Yadav [not found] ` <CGME20221207100650epcas5p408d280e0e2d2d6acfb5e252e37f504b2@epcas5p4.samsung.com> 2022-12-07 10:06 ` [Patch v4 1/2] can: m_can: Call the RAM init directly from m_can_chip_config Vivek Yadav 2022-12-08 9:12 ` Marc Kleine-Budde [not found] ` <CGME20221207100700epcas5p408c436aaaf0edd215b54f36f500cd02c@epcas5p4.samsung.com> 2022-12-07 10:06 ` [Patch v4 2/2] arm64: dts: fsd: Add MCAN device node Vivek Yadav 2022-12-07 11:10 ` Krzysztof Kozlowski 2022-12-07 11:11 ` (subset) " Krzysztof Kozlowski
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).