From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Stephane Grosjean <s.grosjean@peak-system.com>,
linux-can Mailing List <linux-can@vger.kernel.org>
Subject: Re: [PATCH 1/3] can/peak_usb: add support of ethtool set_phys_id()
Date: Tue, 9 Mar 2021 13:15:27 +0100 [thread overview]
Message-ID: <bf2f6330-2f28-54ba-7025-55828f916074@pengutronix.de> (raw)
In-Reply-To: <20210309082128.23125-2-s.grosjean@peak-system.com>
[-- Attachment #1.1: Type: text/plain, Size: 10172 bytes --]
On 3/9/21 9:21 AM, Stephane Grosjean wrote:
> This patch makes it possible to specifically flash the LED of a CAN port
> of the CAN-USB interfaces of PEAK-System.
>
> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
> ---
> drivers/net/can/usb/peak_usb/pcan_usb.c | 47 ++++++++++++++++++++
> drivers/net/can/usb/peak_usb/pcan_usb_core.c | 4 ++
> drivers/net/can/usb/peak_usb/pcan_usb_core.h | 2 +
> drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 33 ++++++++++++++
> drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 34 +++++++++++++-
> drivers/net/can/usb/peak_usb/pcan_usb_pro.h | 6 +++
> 6 files changed, 125 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c
> index e6c1e5d33924..aa89c1119e27 100644
> --- a/drivers/net/can/usb/peak_usb/pcan_usb.c
> +++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
> @@ -11,6 +11,7 @@
> #include <linux/netdevice.h>
> #include <linux/usb.h>
> #include <linux/module.h>
> +#include <linux/ethtool.h>
>
> #include <linux/can.h>
> #include <linux/can/dev.h>
> @@ -42,6 +43,7 @@ MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB adapter");
> #define PCAN_USB_CMD_REGISTER 9
> #define PCAN_USB_CMD_EXT_VCC 10
> #define PCAN_USB_CMD_ERR_FR 11
> +#define PCAN_USB_CMD_LED 12
>
> /* PCAN_USB_CMD_SET_BUS number arg */
> #define PCAN_USB_BUS_XCVER 2
> @@ -250,6 +252,15 @@ static int pcan_usb_set_ext_vcc(struct peak_usb_device *dev, u8 onoff)
> return pcan_usb_send_cmd(dev, PCAN_USB_CMD_EXT_VCC, PCAN_USB_SET, args);
> }
>
> +static int pcan_usb_set_led(struct peak_usb_device *dev, u8 onoff)
> +{
> + u8 args[PCAN_USB_CMD_ARGS_LEN] = {
> + [0] = !!onoff,
> + };
> +
> + return pcan_usb_send_cmd(dev, PCAN_USB_CMD_LED, PCAN_USB_SET, args);
> +}
> +
> /*
> * set bittiming value to can
> */
> @@ -973,6 +984,40 @@ static int pcan_usb_probe(struct usb_interface *intf)
> return 0;
> }
>
> +static int pcan_usb_set_phys_id(struct net_device *netdev,
> + enum ethtool_phys_id_state state)
> +{
> + struct peak_usb_device *dev = netdev_priv(netdev);
> + int err = 0;
> +
> + switch (state) {
> + case ETHTOOL_ID_ACTIVE:
> + /* call ON/OFF twice a second */
> + return 2;
> +
> + case ETHTOOL_ID_OFF:
> + err = pcan_usb_set_led(dev, 0);
> + break;
> +
> + case ETHTOOL_ID_ON:
> + fallthrough;
> +
> + case ETHTOOL_ID_INACTIVE:
> + /* restore LED default */
> + err = pcan_usb_set_led(dev, 1);
> + break;
> +
> + default:
> + break;
> + }
> +
> + return err;
> +}
> +
> +static const struct ethtool_ops pcan_usb_ethtool_ops = {
> + .set_phys_id = pcan_usb_set_phys_id,
> +};
> +
> /*
> * describe the PCAN-USB adapter
> */
> @@ -1003,6 +1048,8 @@ const struct peak_usb_adapter pcan_usb = {
> /* size of device private data */
> .sizeof_dev_private = sizeof(struct pcan_usb),
>
> + .ethtool_ops = &pcan_usb_ethtool_ops,
> +
> /* timestamps usage */
> .ts_used_bits = 16,
> .ts_period = 24575, /* calibration period in ts. */
> diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
> index 573b11559d73..685c59e2cfd3 100644
> --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
> +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
> @@ -14,6 +14,7 @@
> #include <linux/module.h>
> #include <linux/netdevice.h>
> #include <linux/usb.h>
> +#include <linux/ethtool.h>
>
> #include <linux/can.h>
> #include <linux/can/dev.h>
> @@ -820,6 +821,9 @@ static int peak_usb_create_dev(const struct peak_usb_adapter *peak_usb_adapter,
>
> netdev->flags |= IFF_ECHO; /* we support local echo */
>
> + /* add ethtool support */
> + netdev->ethtool_ops = peak_usb_adapter->ethtool_ops;
> +
> init_usb_anchor(&dev->rx_submitted);
>
> init_usb_anchor(&dev->tx_submitted);
> diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.h b/drivers/net/can/usb/peak_usb/pcan_usb_core.h
> index 4b1528a42a7b..e15b4c78f309 100644
> --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.h
> +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.h
> @@ -46,6 +46,8 @@ struct peak_usb_adapter {
> const struct can_bittiming_const * const data_bittiming_const;
> unsigned int ctrl_count;
>
> + const struct ethtool_ops *ethtool_ops;
> +
> int (*intf_probe)(struct usb_interface *intf);
>
> int (*dev_init)(struct peak_usb_device *dev);
> diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
> index f347ecc79aef..6183a42f6491 100644
> --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
> +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
> @@ -7,6 +7,7 @@
> #include <linux/netdevice.h>
> #include <linux/usb.h>
> #include <linux/module.h>
> +#include <linux/ethtool.h>
>
> #include <linux/can.h>
> #include <linux/can/dev.h>
> @@ -1009,6 +1010,31 @@ static void pcan_usb_fd_free(struct peak_usb_device *dev)
> }
> }
>
> +/* blink LED's */
> +static int pcan_usb_fd_set_phys_id(struct net_device *netdev,
> + enum ethtool_phys_id_state state)
> +{
> + struct peak_usb_device *dev = netdev_priv(netdev);
> + int err = 0;
> +
> + switch (state) {
> + case ETHTOOL_ID_ACTIVE:
> + err = pcan_usb_fd_set_can_led(dev, PCAN_UFD_LED_FAST);
> + break;
> + case ETHTOOL_ID_INACTIVE:
> + err = pcan_usb_fd_set_can_led(dev, PCAN_UFD_LED_DEF);
> + break;
> + default:
> + break;
> + }
> +
> + return err;
> +}
> +
> +static const struct ethtool_ops pcan_usb_fd_ethtool_ops = {
> + .set_phys_id = pcan_usb_fd_set_phys_id,
> +};
> +
> /* describes the PCAN-USB FD adapter */
> static const struct can_bittiming_const pcan_usb_fd_const = {
> .name = "pcan_usb_fd",
> @@ -1050,6 +1076,8 @@ const struct peak_usb_adapter pcan_usb_fd = {
> /* size of device private data */
> .sizeof_dev_private = sizeof(struct pcan_usb_fd_device),
>
> + .ethtool_ops = &pcan_usb_fd_ethtool_ops,
> +
> /* timestamps usage */
> .ts_used_bits = 32,
> .ts_period = 1000000, /* calibration period in ts. */
> @@ -1122,6 +1150,7 @@ const struct peak_usb_adapter pcan_usb_chip = {
>
> /* size of device private data */
> .sizeof_dev_private = sizeof(struct pcan_usb_fd_device),
> + .ethtool_ops = &pcan_usb_fd_ethtool_ops,
>
> /* timestamps usage */
> .ts_used_bits = 32,
> @@ -1196,6 +1225,8 @@ const struct peak_usb_adapter pcan_usb_pro_fd = {
> /* size of device private data */
> .sizeof_dev_private = sizeof(struct pcan_usb_fd_device),
>
> + .ethtool_ops = &pcan_usb_fd_ethtool_ops,
> +
> /* timestamps usage */
> .ts_used_bits = 32,
> .ts_period = 1000000, /* calibration period in ts. */
> @@ -1269,6 +1300,8 @@ const struct peak_usb_adapter pcan_usb_x6 = {
> /* size of device private data */
> .sizeof_dev_private = sizeof(struct pcan_usb_fd_device),
>
> + .ethtool_ops = &pcan_usb_fd_ethtool_ops,
> +
> /* timestamps usage */
> .ts_used_bits = 32,
> .ts_period = 1000000, /* calibration period in ts. */
> diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
> index 275087c39602..ff740b4203fa 100644
> --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
> +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
> @@ -9,6 +9,7 @@
> #include <linux/netdevice.h>
> #include <linux/usb.h>
> #include <linux/module.h>
> +#include <linux/ethtool.h>
>
> #include <linux/can.h>
> #include <linux/can/dev.h>
> @@ -908,7 +909,7 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev)
> usb_if->dev[dev->ctrl_idx] = dev;
>
> /* set LED in default state (end of init phase) */
> - pcan_usb_pro_set_led(dev, 0, 1);
> + pcan_usb_pro_set_led(dev, FW_USBPRO_LED_DEVICE, 1);
>
> kfree(bi);
> kfree(fi);
> @@ -992,6 +993,35 @@ int pcan_usb_pro_probe(struct usb_interface *intf)
> return 0;
> }
>
> +static int pcan_usb_pro_set_phys_id(struct net_device *netdev,
> + enum ethtool_phys_id_state state)
> +{
> + struct peak_usb_device *dev = netdev_priv(netdev);
> + int err = 0;
> +
> + switch (state) {
> + case ETHTOOL_ID_ACTIVE:
> + /* fast blinking forever */
> + err = pcan_usb_pro_set_led(dev, FW_USBPRO_LED_BLINK_FAST,
> + 0xffffffff);
> + break;
> +
> + case ETHTOOL_ID_INACTIVE:
> + /* restore LED default */
> + err = pcan_usb_pro_set_led(dev, FW_USBPRO_LED_DEVICE, 1);
> + break;
> +
> + default:
> + break;
> + }
> +
> + return err;
> +}
> +
> +static const struct ethtool_ops pcan_usb_pro_ethtool_ops = {
> + .set_phys_id = pcan_usb_pro_set_phys_id,
> +};
> +
> /*
> * describe the PCAN-USB Pro adapter
> */
> @@ -1020,6 +1050,8 @@ const struct peak_usb_adapter pcan_usb_pro = {
> /* size of device private data */
> .sizeof_dev_private = sizeof(struct pcan_usb_pro_device),
>
> + .ethtool_ops = &pcan_usb_pro_ethtool_ops,
> +
> /* timestamps usage */
> .ts_used_bits = 32,
> .ts_period = 1000000, /* calibration period in ts. */
> diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h
> index 6bb12357d078..421104ee29f4 100644
> --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h
> +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h
> @@ -115,6 +115,12 @@ struct __packed pcan_usb_pro_devid {
> __le32 serial_num;
> };
>
> +#define FW_USBPRO_LED_DEVICE 0x00
> +#define FW_USBPRO_LED_BLINK_FAST 0x01
> +#define FW_USBPRO_LED_BLINK_SLOW 0x02
> +#define FW_USBPRO_LED_ON 0x03
> +#define FW_USBPRO_LED_OFF 0x04
What about replacing the FW_ with PCAN_, so that we're using the same prefix
within the driver? I can do this while applying.
> +
> struct __packed pcan_usb_pro_setled {
> u8 data_type;
> u8 channel;
>
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2021-03-09 12:16 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-09 8:21 [PATCH 0/3] can/peak_usb: Added improvement to the peak_usb driver Stephane Grosjean
2021-03-09 8:21 ` [PATCH 1/3] can/peak_usb: add support of ethtool set_phys_id() Stephane Grosjean
2021-03-09 11:20 ` Marc Kleine-Budde
2021-03-09 12:15 ` Marc Kleine-Budde [this message]
2021-03-19 8:35 ` Marc Kleine-Budde
2021-03-09 8:21 ` [PATCH 2/3] can/peak_usb: add forgotten supported devices Stephane Grosjean
2021-03-09 11:07 ` Marc Kleine-Budde
2021-03-09 14:22 ` Stéphane Grosjean
2021-03-09 15:27 ` Marc Kleine-Budde
2021-03-09 15:28 ` Marc Kleine-Budde
2021-03-19 8:39 ` Marc Kleine-Budde
2021-03-19 9:47 ` Vincent MAILHOL
2021-03-19 9:56 ` Marc Kleine-Budde
2021-03-19 10:07 ` Vincent MAILHOL
2021-03-19 12:00 ` Stéphane Grosjean
2021-03-09 8:21 ` [PATCH 3/3] can/peak_usb: add support of ONE_SHOT mode Stephane Grosjean
2021-03-09 10:36 ` Marc Kleine-Budde
2021-03-09 10:53 ` Oliver Hartkopp
2021-03-09 10:58 ` Marc Kleine-Budde
2021-03-19 10:01 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bf2f6330-2f28-54ba-7025-55828f916074@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=linux-can@vger.kernel.org \
--cc=s.grosjean@peak-system.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).