* [PATCH 01/11] dt-bindings: clock: am33xx: add clkctrl indices for new data layout
2018-08-31 15:06 [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries Tero Kristo
@ 2018-08-31 15:06 ` Tero Kristo
2018-08-31 15:06 ` [PATCH 02/11] dt-bindings: clock: am43xx: " Tero Kristo
` (10 subsequent siblings)
11 siblings, 0 replies; 27+ messages in thread
From: Tero Kristo @ 2018-08-31 15:06 UTC (permalink / raw)
To: linux-clk, sboyd, mturquette; +Cc: linux-omap, tony
The new data layout will be split based on clockdomain boundaries, instead
of CM boundaries. This introduces a few new clkctrl providers, that have
different indices for the clkctrl data.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
include/dt-bindings/clock/am3.h | 119 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 119 insertions(+)
diff --git a/include/dt-bindings/clock/am3.h b/include/dt-bindings/clock/am3.h
index b396f00..86a8806 100644
--- a/include/dt-bindings/clock/am3.h
+++ b/include/dt-bindings/clock/am3.h
@@ -16,6 +16,8 @@
#define AM3_CLKCTRL_OFFSET 0x0
#define AM3_CLKCTRL_INDEX(offset) ((offset) - AM3_CLKCTRL_OFFSET)
+/* XXX: Compatibility part begin, remove this once compatibility support is no longer needed */
+
/* l4_per clocks */
#define AM3_L4_PER_CLKCTRL_OFFSET 0x14
#define AM3_L4_PER_CLKCTRL_INDEX(offset) ((offset) - AM3_L4_PER_CLKCTRL_OFFSET)
@@ -105,4 +107,121 @@
#define AM3_L4_CEFUSE_CLKCTRL_INDEX(offset) ((offset) - AM3_L4_CEFUSE_CLKCTRL_OFFSET)
#define AM3_CEFUSE_CLKCTRL AM3_L4_CEFUSE_CLKCTRL_INDEX(0x20)
+/* XXX: Compatibility part end */
+
+/* l4ls clocks */
+#define AM3_L4LS_CLKCTRL_OFFSET 0x38
+#define AM3_L4LS_CLKCTRL_INDEX(offset) ((offset) - AM3_L4LS_CLKCTRL_OFFSET)
+#define AM3_L4LS_UART6_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x38)
+#define AM3_L4LS_MMC1_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x3c)
+#define AM3_L4LS_ELM_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x40)
+#define AM3_L4LS_I2C3_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x44)
+#define AM3_L4LS_I2C2_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x48)
+#define AM3_L4LS_SPI0_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x4c)
+#define AM3_L4LS_SPI1_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x50)
+#define AM3_L4LS_L4_LS_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x60)
+#define AM3_L4LS_UART2_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x6c)
+#define AM3_L4LS_UART3_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x70)
+#define AM3_L4LS_UART4_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x74)
+#define AM3_L4LS_UART5_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x78)
+#define AM3_L4LS_TIMER7_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x7c)
+#define AM3_L4LS_TIMER2_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x80)
+#define AM3_L4LS_TIMER3_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x84)
+#define AM3_L4LS_TIMER4_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x88)
+#define AM3_L4LS_RNG_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x90)
+#define AM3_L4LS_GPIO2_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xac)
+#define AM3_L4LS_GPIO3_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xb0)
+#define AM3_L4LS_GPIO4_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xb4)
+#define AM3_L4LS_D_CAN0_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xc0)
+#define AM3_L4LS_D_CAN1_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xc4)
+#define AM3_L4LS_EPWMSS1_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xcc)
+#define AM3_L4LS_EPWMSS0_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xd4)
+#define AM3_L4LS_EPWMSS2_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xd8)
+#define AM3_L4LS_TIMER5_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xec)
+#define AM3_L4LS_TIMER6_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xf0)
+#define AM3_L4LS_MMC2_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xf4)
+#define AM3_L4LS_SPINLOCK_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x10c)
+#define AM3_L4LS_MAILBOX_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x110)
+#define AM3_L4LS_OCPWP_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x130)
+
+/* l3s clocks */
+#define AM3_L3S_CLKCTRL_OFFSET 0x1c
+#define AM3_L3S_CLKCTRL_INDEX(offset) ((offset) - AM3_L3S_CLKCTRL_OFFSET)
+#define AM3_L3S_USB_OTG_HS_CLKCTRL AM3_L3S_CLKCTRL_INDEX(0x1c)
+#define AM3_L3S_GPMC_CLKCTRL AM3_L3S_CLKCTRL_INDEX(0x30)
+#define AM3_L3S_MCASP0_CLKCTRL AM3_L3S_CLKCTRL_INDEX(0x34)
+#define AM3_L3S_MCASP1_CLKCTRL AM3_L3S_CLKCTRL_INDEX(0x68)
+#define AM3_L3S_MMC3_CLKCTRL AM3_L3S_CLKCTRL_INDEX(0xf8)
+
+/* l3 clocks */
+#define AM3_L3_CLKCTRL_OFFSET 0x24
+#define AM3_L3_CLKCTRL_INDEX(offset) ((offset) - AM3_L3_CLKCTRL_OFFSET)
+#define AM3_L3_TPTC0_CLKCTRL AM3_L3_CLKCTRL_INDEX(0x24)
+#define AM3_L3_EMIF_CLKCTRL AM3_L3_CLKCTRL_INDEX(0x28)
+#define AM3_L3_OCMCRAM_CLKCTRL AM3_L3_CLKCTRL_INDEX(0x2c)
+#define AM3_L3_AES_CLKCTRL AM3_L3_CLKCTRL_INDEX(0x94)
+#define AM3_L3_SHAM_CLKCTRL AM3_L3_CLKCTRL_INDEX(0xa0)
+#define AM3_L3_TPCC_CLKCTRL AM3_L3_CLKCTRL_INDEX(0xbc)
+#define AM3_L3_L3_INSTR_CLKCTRL AM3_L3_CLKCTRL_INDEX(0xdc)
+#define AM3_L3_L3_MAIN_CLKCTRL AM3_L3_CLKCTRL_INDEX(0xe0)
+#define AM3_L3_TPTC1_CLKCTRL AM3_L3_CLKCTRL_INDEX(0xfc)
+#define AM3_L3_TPTC2_CLKCTRL AM3_L3_CLKCTRL_INDEX(0x100)
+
+/* l4hs clocks */
+#define AM3_L4HS_CLKCTRL_OFFSET 0x120
+#define AM3_L4HS_CLKCTRL_INDEX(offset) ((offset) - AM3_L4HS_CLKCTRL_OFFSET)
+#define AM3_L4HS_L4_HS_CLKCTRL AM3_L4HS_CLKCTRL_INDEX(0x120)
+
+/* pruss_ocp clocks */
+#define AM3_PRUSS_OCP_CLKCTRL_OFFSET 0xe8
+#define AM3_PRUSS_OCP_CLKCTRL_INDEX(offset) ((offset) - AM3_PRUSS_OCP_CLKCTRL_OFFSET)
+#define AM3_PRUSS_OCP_PRUSS_CLKCTRL AM3_PRUSS_OCP_CLKCTRL_INDEX(0xe8)
+
+/* cpsw_125mhz clocks */
+#define AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL AM3_CLKCTRL_INDEX(0x14)
+
+/* lcdc clocks */
+#define AM3_LCDC_CLKCTRL_OFFSET 0x18
+#define AM3_LCDC_CLKCTRL_INDEX(offset) ((offset) - AM3_LCDC_CLKCTRL_OFFSET)
+#define AM3_LCDC_LCDC_CLKCTRL AM3_LCDC_CLKCTRL_INDEX(0x18)
+
+/* clk_24mhz clocks */
+#define AM3_CLK_24MHZ_CLKCTRL_OFFSET 0x14c
+#define AM3_CLK_24MHZ_CLKCTRL_INDEX(offset) ((offset) - AM3_CLK_24MHZ_CLKCTRL_OFFSET)
+#define AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL AM3_CLK_24MHZ_CLKCTRL_INDEX(0x14c)
+
+/* l4_wkup clocks */
+#define AM3_L4_WKUP_CONTROL_CLKCTRL AM3_CLKCTRL_INDEX(0x4)
+#define AM3_L4_WKUP_GPIO1_CLKCTRL AM3_CLKCTRL_INDEX(0x8)
+#define AM3_L4_WKUP_L4_WKUP_CLKCTRL AM3_CLKCTRL_INDEX(0xc)
+#define AM3_L4_WKUP_UART1_CLKCTRL AM3_CLKCTRL_INDEX(0xb4)
+#define AM3_L4_WKUP_I2C1_CLKCTRL AM3_CLKCTRL_INDEX(0xb8)
+#define AM3_L4_WKUP_ADC_TSC_CLKCTRL AM3_CLKCTRL_INDEX(0xbc)
+#define AM3_L4_WKUP_SMARTREFLEX0_CLKCTRL AM3_CLKCTRL_INDEX(0xc0)
+#define AM3_L4_WKUP_TIMER1_CLKCTRL AM3_CLKCTRL_INDEX(0xc4)
+#define AM3_L4_WKUP_SMARTREFLEX1_CLKCTRL AM3_CLKCTRL_INDEX(0xc8)
+#define AM3_L4_WKUP_WD_TIMER2_CLKCTRL AM3_CLKCTRL_INDEX(0xd4)
+
+/* l3_aon clocks */
+#define AM3_L3_AON_CLKCTRL_OFFSET 0x14
+#define AM3_L3_AON_CLKCTRL_INDEX(offset) ((offset) - AM3_L3_AON_CLKCTRL_OFFSET)
+#define AM3_L3_AON_DEBUGSS_CLKCTRL AM3_L3_AON_CLKCTRL_INDEX(0x14)
+
+/* l4_wkup_aon clocks */
+#define AM3_L4_WKUP_AON_CLKCTRL_OFFSET 0xb0
+#define AM3_L4_WKUP_AON_CLKCTRL_INDEX(offset) ((offset) - AM3_L4_WKUP_AON_CLKCTRL_OFFSET)
+#define AM3_L4_WKUP_AON_WKUP_M3_CLKCTRL AM3_L4_WKUP_AON_CLKCTRL_INDEX(0xb0)
+
+/* mpu clocks */
+#define AM3_MPU_MPU_CLKCTRL AM3_CLKCTRL_INDEX(0x4)
+
+/* l4_rtc clocks */
+#define AM3_L4_RTC_RTC_CLKCTRL AM3_CLKCTRL_INDEX(0x0)
+
+/* gfx_l3 clocks */
+#define AM3_GFX_L3_GFX_CLKCTRL AM3_CLKCTRL_INDEX(0x4)
+
+/* l4_cefuse clocks */
+#define AM3_L4_CEFUSE_CEFUSE_CLKCTRL AM3_CLKCTRL_INDEX(0x20)
+
#endif
--
1.9.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 02/11] dt-bindings: clock: am43xx: add clkctrl indices for new data layout
2018-08-31 15:06 [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries Tero Kristo
2018-08-31 15:06 ` [PATCH 01/11] dt-bindings: clock: am33xx: add clkctrl indices for new data layout Tero Kristo
@ 2018-08-31 15:06 ` Tero Kristo
2018-08-31 15:06 ` [PATCH 03/11] dt-bindings: clock: dra7xx: " Tero Kristo
` (9 subsequent siblings)
11 siblings, 0 replies; 27+ messages in thread
From: Tero Kristo @ 2018-08-31 15:06 UTC (permalink / raw)
To: linux-clk, sboyd, mturquette; +Cc: linux-omap, tony
The new data layout will be split based on clockdomain boundaries, instead
of CM boundaries. This introduces a few new clkctrl providers, that have
different indices for the clkctrl data.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
include/dt-bindings/clock/am4.h | 132 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 132 insertions(+)
diff --git a/include/dt-bindings/clock/am4.h b/include/dt-bindings/clock/am4.h
index d21df00..0f545b5 100644
--- a/include/dt-bindings/clock/am4.h
+++ b/include/dt-bindings/clock/am4.h
@@ -16,6 +16,8 @@
#define AM4_CLKCTRL_OFFSET 0x20
#define AM4_CLKCTRL_INDEX(offset) ((offset) - AM4_CLKCTRL_OFFSET)
+/* XXX: Compatibility part begin, remove this once compatibility support is no longer needed */
+
/* l4_wkup clocks */
#define AM4_ADC_TSC_CLKCTRL AM4_CLKCTRL_INDEX(0x120)
#define AM4_L4_WKUP_CLKCTRL AM4_CLKCTRL_INDEX(0x220)
@@ -110,4 +112,134 @@
#define AM4_DSS_CORE_CLKCTRL AM4_CLKCTRL_INDEX(0xa20)
#define AM4_CPGMAC0_CLKCTRL AM4_CLKCTRL_INDEX(0xb20)
+/* XXX: Compatibility part end. */
+
+/* l3s_tsc clocks */
+#define AM4_L3S_TSC_CLKCTRL_OFFSET 0x120
+#define AM4_L3S_TSC_CLKCTRL_INDEX(offset) ((offset) - AM4_L3S_TSC_CLKCTRL_OFFSET)
+#define AM4_L3S_TSC_ADC_TSC_CLKCTRL AM4_L3S_TSC_CLKCTRL_INDEX(0x120)
+
+/* l4_wkup_aon clocks */
+#define AM4_L4_WKUP_AON_CLKCTRL_OFFSET 0x228
+#define AM4_L4_WKUP_AON_CLKCTRL_INDEX(offset) ((offset) - AM4_L4_WKUP_AON_CLKCTRL_OFFSET)
+#define AM4_L4_WKUP_AON_WKUP_M3_CLKCTRL AM4_L4_WKUP_AON_CLKCTRL_INDEX(0x228)
+#define AM4_L4_WKUP_AON_COUNTER_32K_CLKCTRL AM4_L4_WKUP_AON_CLKCTRL_INDEX(0x230)
+
+/* l4_wkup clocks */
+#define AM4_L4_WKUP_CLKCTRL_OFFSET 0x220
+#define AM4_L4_WKUP_CLKCTRL_INDEX(offset) ((offset) - AM4_L4_WKUP_CLKCTRL_OFFSET)
+#define AM4_L4_WKUP_L4_WKUP_CLKCTRL AM4_L4_WKUP_CLKCTRL_INDEX(0x220)
+#define AM4_L4_WKUP_TIMER1_CLKCTRL AM4_L4_WKUP_CLKCTRL_INDEX(0x328)
+#define AM4_L4_WKUP_WD_TIMER2_CLKCTRL AM4_L4_WKUP_CLKCTRL_INDEX(0x338)
+#define AM4_L4_WKUP_I2C1_CLKCTRL AM4_L4_WKUP_CLKCTRL_INDEX(0x340)
+#define AM4_L4_WKUP_UART1_CLKCTRL AM4_L4_WKUP_CLKCTRL_INDEX(0x348)
+#define AM4_L4_WKUP_SMARTREFLEX0_CLKCTRL AM4_L4_WKUP_CLKCTRL_INDEX(0x350)
+#define AM4_L4_WKUP_SMARTREFLEX1_CLKCTRL AM4_L4_WKUP_CLKCTRL_INDEX(0x358)
+#define AM4_L4_WKUP_CONTROL_CLKCTRL AM4_L4_WKUP_CLKCTRL_INDEX(0x360)
+#define AM4_L4_WKUP_GPIO1_CLKCTRL AM4_L4_WKUP_CLKCTRL_INDEX(0x368)
+
+/* mpu clocks */
+#define AM4_MPU_MPU_CLKCTRL AM4_CLKCTRL_INDEX(0x20)
+
+/* gfx_l3 clocks */
+#define AM4_GFX_L3_GFX_CLKCTRL AM4_CLKCTRL_INDEX(0x20)
+
+/* l4_rtc clocks */
+#define AM4_L4_RTC_RTC_CLKCTRL AM4_CLKCTRL_INDEX(0x20)
+
+/* l3 clocks */
+#define AM4_L3_L3_MAIN_CLKCTRL AM4_CLKCTRL_INDEX(0x20)
+#define AM4_L3_AES_CLKCTRL AM4_CLKCTRL_INDEX(0x28)
+#define AM4_L3_DES_CLKCTRL AM4_CLKCTRL_INDEX(0x30)
+#define AM4_L3_L3_INSTR_CLKCTRL AM4_CLKCTRL_INDEX(0x40)
+#define AM4_L3_OCMCRAM_CLKCTRL AM4_CLKCTRL_INDEX(0x50)
+#define AM4_L3_SHAM_CLKCTRL AM4_CLKCTRL_INDEX(0x58)
+#define AM4_L3_TPCC_CLKCTRL AM4_CLKCTRL_INDEX(0x78)
+#define AM4_L3_TPTC0_CLKCTRL AM4_CLKCTRL_INDEX(0x80)
+#define AM4_L3_TPTC1_CLKCTRL AM4_CLKCTRL_INDEX(0x88)
+#define AM4_L3_TPTC2_CLKCTRL AM4_CLKCTRL_INDEX(0x90)
+#define AM4_L3_L4_HS_CLKCTRL AM4_CLKCTRL_INDEX(0xa0)
+
+/* l3s clocks */
+#define AM4_L3S_CLKCTRL_OFFSET 0x68
+#define AM4_L3S_CLKCTRL_INDEX(offset) ((offset) - AM4_L3S_CLKCTRL_OFFSET)
+#define AM4_L3S_VPFE0_CLKCTRL AM4_L3S_CLKCTRL_INDEX(0x68)
+#define AM4_L3S_VPFE1_CLKCTRL AM4_L3S_CLKCTRL_INDEX(0x70)
+#define AM4_L3S_GPMC_CLKCTRL AM4_L3S_CLKCTRL_INDEX(0x220)
+#define AM4_L3S_MCASP0_CLKCTRL AM4_L3S_CLKCTRL_INDEX(0x238)
+#define AM4_L3S_MCASP1_CLKCTRL AM4_L3S_CLKCTRL_INDEX(0x240)
+#define AM4_L3S_MMC3_CLKCTRL AM4_L3S_CLKCTRL_INDEX(0x248)
+#define AM4_L3S_QSPI_CLKCTRL AM4_L3S_CLKCTRL_INDEX(0x258)
+#define AM4_L3S_USB_OTG_SS0_CLKCTRL AM4_L3S_CLKCTRL_INDEX(0x260)
+#define AM4_L3S_USB_OTG_SS1_CLKCTRL AM4_L3S_CLKCTRL_INDEX(0x268)
+
+/* pruss_ocp clocks */
+#define AM4_PRUSS_OCP_CLKCTRL_OFFSET 0x320
+#define AM4_PRUSS_OCP_CLKCTRL_INDEX(offset) ((offset) - AM4_PRUSS_OCP_CLKCTRL_OFFSET)
+#define AM4_PRUSS_OCP_PRUSS_CLKCTRL AM4_PRUSS_OCP_CLKCTRL_INDEX(0x320)
+
+/* l4ls clocks */
+#define AM4_L4LS_CLKCTRL_OFFSET 0x420
+#define AM4_L4LS_CLKCTRL_INDEX(offset) ((offset) - AM4_L4LS_CLKCTRL_OFFSET)
+#define AM4_L4LS_L4_LS_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x420)
+#define AM4_L4LS_D_CAN0_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x428)
+#define AM4_L4LS_D_CAN1_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x430)
+#define AM4_L4LS_EPWMSS0_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x438)
+#define AM4_L4LS_EPWMSS1_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x440)
+#define AM4_L4LS_EPWMSS2_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x448)
+#define AM4_L4LS_EPWMSS3_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x450)
+#define AM4_L4LS_EPWMSS4_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x458)
+#define AM4_L4LS_EPWMSS5_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x460)
+#define AM4_L4LS_ELM_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x468)
+#define AM4_L4LS_GPIO2_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x478)
+#define AM4_L4LS_GPIO3_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x480)
+#define AM4_L4LS_GPIO4_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x488)
+#define AM4_L4LS_GPIO5_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x490)
+#define AM4_L4LS_GPIO6_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x498)
+#define AM4_L4LS_HDQ1W_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x4a0)
+#define AM4_L4LS_I2C2_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x4a8)
+#define AM4_L4LS_I2C3_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x4b0)
+#define AM4_L4LS_MAILBOX_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x4b8)
+#define AM4_L4LS_MMC1_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x4c0)
+#define AM4_L4LS_MMC2_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x4c8)
+#define AM4_L4LS_RNG_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x4e0)
+#define AM4_L4LS_SPI0_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x500)
+#define AM4_L4LS_SPI1_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x508)
+#define AM4_L4LS_SPI2_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x510)
+#define AM4_L4LS_SPI3_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x518)
+#define AM4_L4LS_SPI4_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x520)
+#define AM4_L4LS_SPINLOCK_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x528)
+#define AM4_L4LS_TIMER2_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x530)
+#define AM4_L4LS_TIMER3_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x538)
+#define AM4_L4LS_TIMER4_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x540)
+#define AM4_L4LS_TIMER5_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x548)
+#define AM4_L4LS_TIMER6_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x550)
+#define AM4_L4LS_TIMER7_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x558)
+#define AM4_L4LS_TIMER8_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x560)
+#define AM4_L4LS_TIMER9_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x568)
+#define AM4_L4LS_TIMER10_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x570)
+#define AM4_L4LS_TIMER11_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x578)
+#define AM4_L4LS_UART2_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x580)
+#define AM4_L4LS_UART3_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x588)
+#define AM4_L4LS_UART4_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x590)
+#define AM4_L4LS_UART5_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x598)
+#define AM4_L4LS_UART6_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x5a0)
+#define AM4_L4LS_OCP2SCP0_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x5b8)
+#define AM4_L4LS_OCP2SCP1_CLKCTRL AM4_L4LS_CLKCTRL_INDEX(0x5c0)
+
+/* emif clocks */
+#define AM4_EMIF_CLKCTRL_OFFSET 0x720
+#define AM4_EMIF_CLKCTRL_INDEX(offset) ((offset) - AM4_EMIF_CLKCTRL_OFFSET)
+#define AM4_EMIF_EMIF_CLKCTRL AM4_EMIF_CLKCTRL_INDEX(0x720)
+
+/* dss clocks */
+#define AM4_DSS_CLKCTRL_OFFSET 0xa20
+#define AM4_DSS_CLKCTRL_INDEX(offset) ((offset) - AM4_DSS_CLKCTRL_OFFSET)
+#define AM4_DSS_DSS_CORE_CLKCTRL AM4_DSS_CLKCTRL_INDEX(0xa20)
+
+/* cpsw_125mhz clocks */
+#define AM4_CPSW_125MHZ_CLKCTRL_OFFSET 0xb20
+#define AM4_CPSW_125MHZ_CLKCTRL_INDEX(offset) ((offset) - AM4_CPSW_125MHZ_CLKCTRL_OFFSET)
+#define AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL AM4_CPSW_125MHZ_CLKCTRL_INDEX(0xb20)
+
#endif
--
1.9.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 03/11] dt-bindings: clock: dra7xx: add clkctrl indices for new data layout
2018-08-31 15:06 [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries Tero Kristo
2018-08-31 15:06 ` [PATCH 01/11] dt-bindings: clock: am33xx: add clkctrl indices for new data layout Tero Kristo
2018-08-31 15:06 ` [PATCH 02/11] dt-bindings: clock: am43xx: " Tero Kristo
@ 2018-08-31 15:06 ` Tero Kristo
2018-08-31 15:07 ` [PATCH 04/11] clk: ti: clkctrl: support multiple clkctrl nodes under a cm node Tero Kristo
` (8 subsequent siblings)
11 siblings, 0 replies; 27+ messages in thread
From: Tero Kristo @ 2018-08-31 15:06 UTC (permalink / raw)
To: linux-clk, sboyd, mturquette; +Cc: linux-omap, tony
The new data layout will be split based on clockdomain boundaries, instead
of CM boundaries. This introduces a few new clkctrl providers, that have
different indices for the clkctrl data.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
include/dt-bindings/clock/dra7.h | 326 +++++++++++++++++++++++++++++++--------
1 file changed, 258 insertions(+), 68 deletions(-)
diff --git a/include/dt-bindings/clock/dra7.h b/include/dt-bindings/clock/dra7.h
index d7549c5..ec969b5 100644
--- a/include/dt-bindings/clock/dra7.h
+++ b/include/dt-bindings/clock/dra7.h
@@ -16,19 +16,21 @@
#define DRA7_CLKCTRL_OFFSET 0x20
#define DRA7_CLKCTRL_INDEX(offset) ((offset) - DRA7_CLKCTRL_OFFSET)
+/* XXX: Compatibility part begin, remove this once compatibility support is no longer needed */
+
/* mpu clocks */
#define DRA7_MPU_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
/* ipu clocks */
-#define DRA7_IPU_CLKCTRL_OFFSET 0x40
-#define DRA7_IPU_CLKCTRL_INDEX(offset) ((offset) - DRA7_IPU_CLKCTRL_OFFSET)
-#define DRA7_MCASP1_CLKCTRL DRA7_IPU_CLKCTRL_INDEX(0x50)
-#define DRA7_TIMER5_CLKCTRL DRA7_IPU_CLKCTRL_INDEX(0x58)
-#define DRA7_TIMER6_CLKCTRL DRA7_IPU_CLKCTRL_INDEX(0x60)
-#define DRA7_TIMER7_CLKCTRL DRA7_IPU_CLKCTRL_INDEX(0x68)
-#define DRA7_TIMER8_CLKCTRL DRA7_IPU_CLKCTRL_INDEX(0x70)
-#define DRA7_I2C5_CLKCTRL DRA7_IPU_CLKCTRL_INDEX(0x78)
-#define DRA7_UART6_CLKCTRL DRA7_IPU_CLKCTRL_INDEX(0x80)
+#define _DRA7_IPU_CLKCTRL_OFFSET 0x40
+#define _DRA7_IPU_CLKCTRL_INDEX(offset) ((offset) - _DRA7_IPU_CLKCTRL_OFFSET)
+#define DRA7_MCASP1_CLKCTRL _DRA7_IPU_CLKCTRL_INDEX(0x50)
+#define DRA7_TIMER5_CLKCTRL _DRA7_IPU_CLKCTRL_INDEX(0x58)
+#define DRA7_TIMER6_CLKCTRL _DRA7_IPU_CLKCTRL_INDEX(0x60)
+#define DRA7_TIMER7_CLKCTRL _DRA7_IPU_CLKCTRL_INDEX(0x68)
+#define DRA7_TIMER8_CLKCTRL _DRA7_IPU_CLKCTRL_INDEX(0x70)
+#define DRA7_I2C5_CLKCTRL _DRA7_IPU_CLKCTRL_INDEX(0x78)
+#define DRA7_UART6_CLKCTRL _DRA7_IPU_CLKCTRL_INDEX(0x80)
/* rtc clocks */
#define DRA7_RTC_CLKCTRL_OFFSET 0x40
@@ -99,65 +101,65 @@
#define DRA7_USB_OTG_SS1_CLKCTRL DRA7_CLKCTRL_INDEX(0xf0)
/* l4per clocks */
-#define DRA7_L4PER_CLKCTRL_OFFSET 0x0
-#define DRA7_L4PER_CLKCTRL_INDEX(offset) ((offset) - DRA7_L4PER_CLKCTRL_OFFSET)
-#define DRA7_L4_PER2_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xc)
-#define DRA7_L4_PER3_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x14)
-#define DRA7_TIMER10_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x28)
-#define DRA7_TIMER11_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x30)
-#define DRA7_TIMER2_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x38)
-#define DRA7_TIMER3_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x40)
-#define DRA7_TIMER4_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x48)
-#define DRA7_TIMER9_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x50)
-#define DRA7_ELM_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x58)
-#define DRA7_GPIO2_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x60)
-#define DRA7_GPIO3_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x68)
-#define DRA7_GPIO4_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x70)
-#define DRA7_GPIO5_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x78)
-#define DRA7_GPIO6_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x80)
-#define DRA7_HDQ1W_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x88)
-#define DRA7_EPWMSS1_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x90)
-#define DRA7_EPWMSS2_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x98)
-#define DRA7_I2C1_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xa0)
-#define DRA7_I2C2_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xa8)
-#define DRA7_I2C3_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xb0)
-#define DRA7_I2C4_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xb8)
-#define DRA7_L4_PER1_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xc0)
-#define DRA7_EPWMSS0_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xc4)
-#define DRA7_TIMER13_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xc8)
-#define DRA7_TIMER14_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xd0)
-#define DRA7_TIMER15_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xd8)
-#define DRA7_MCSPI1_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xf0)
-#define DRA7_MCSPI2_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xf8)
-#define DRA7_MCSPI3_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x100)
-#define DRA7_MCSPI4_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x108)
-#define DRA7_GPIO7_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x110)
-#define DRA7_GPIO8_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x118)
-#define DRA7_MMC3_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x120)
-#define DRA7_MMC4_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x128)
-#define DRA7_TIMER16_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x130)
-#define DRA7_QSPI_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x138)
-#define DRA7_UART1_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x140)
-#define DRA7_UART2_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x148)
-#define DRA7_UART3_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x150)
-#define DRA7_UART4_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x158)
-#define DRA7_MCASP2_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x160)
-#define DRA7_MCASP3_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x168)
-#define DRA7_UART5_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x170)
-#define DRA7_MCASP5_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x178)
-#define DRA7_MCASP8_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x190)
-#define DRA7_MCASP4_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x198)
-#define DRA7_AES1_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x1a0)
-#define DRA7_AES2_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x1a8)
-#define DRA7_DES_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x1b0)
-#define DRA7_RNG_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x1c0)
-#define DRA7_SHAM_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x1c8)
-#define DRA7_UART7_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x1d0)
-#define DRA7_UART8_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x1e0)
-#define DRA7_UART9_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x1e8)
-#define DRA7_DCAN2_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x1f0)
-#define DRA7_MCASP6_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x204)
-#define DRA7_MCASP7_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x208)
+#define _DRA7_L4PER_CLKCTRL_OFFSET 0x0
+#define _DRA7_L4PER_CLKCTRL_INDEX(offset) ((offset) - _DRA7_L4PER_CLKCTRL_OFFSET)
+#define DRA7_L4_PER2_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0xc)
+#define DRA7_L4_PER3_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x14)
+#define DRA7_TIMER10_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x28)
+#define DRA7_TIMER11_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x30)
+#define DRA7_TIMER2_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x38)
+#define DRA7_TIMER3_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x40)
+#define DRA7_TIMER4_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x48)
+#define DRA7_TIMER9_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x50)
+#define DRA7_ELM_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x58)
+#define DRA7_GPIO2_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x60)
+#define DRA7_GPIO3_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x68)
+#define DRA7_GPIO4_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x70)
+#define DRA7_GPIO5_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x78)
+#define DRA7_GPIO6_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x80)
+#define DRA7_HDQ1W_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x88)
+#define DRA7_EPWMSS1_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x90)
+#define DRA7_EPWMSS2_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x98)
+#define DRA7_I2C1_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0xa0)
+#define DRA7_I2C2_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0xa8)
+#define DRA7_I2C3_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0xb0)
+#define DRA7_I2C4_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0xb8)
+#define DRA7_L4_PER1_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0xc0)
+#define DRA7_EPWMSS0_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0xc4)
+#define DRA7_TIMER13_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0xc8)
+#define DRA7_TIMER14_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0xd0)
+#define DRA7_TIMER15_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0xd8)
+#define DRA7_MCSPI1_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0xf0)
+#define DRA7_MCSPI2_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0xf8)
+#define DRA7_MCSPI3_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x100)
+#define DRA7_MCSPI4_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x108)
+#define DRA7_GPIO7_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x110)
+#define DRA7_GPIO8_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x118)
+#define DRA7_MMC3_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x120)
+#define DRA7_MMC4_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x128)
+#define DRA7_TIMER16_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x130)
+#define DRA7_QSPI_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x138)
+#define DRA7_UART1_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x140)
+#define DRA7_UART2_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x148)
+#define DRA7_UART3_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x150)
+#define DRA7_UART4_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x158)
+#define DRA7_MCASP2_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x160)
+#define DRA7_MCASP3_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x168)
+#define DRA7_UART5_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x170)
+#define DRA7_MCASP5_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x178)
+#define DRA7_MCASP8_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x190)
+#define DRA7_MCASP4_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x198)
+#define DRA7_AES1_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x1a0)
+#define DRA7_AES2_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x1a8)
+#define DRA7_DES_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x1b0)
+#define DRA7_RNG_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x1c0)
+#define DRA7_SHAM_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x1c8)
+#define DRA7_UART7_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x1d0)
+#define DRA7_UART8_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x1e0)
+#define DRA7_UART9_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x1e8)
+#define DRA7_DCAN2_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x1f0)
+#define DRA7_MCASP6_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x204)
+#define DRA7_MCASP7_CLKCTRL _DRA7_L4PER_CLKCTRL_INDEX(0x208)
/* wkupaon clocks */
#define DRA7_L4_WKUP_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
@@ -170,4 +172,192 @@
#define DRA7_DCAN1_CLKCTRL DRA7_CLKCTRL_INDEX(0x88)
#define DRA7_ADC_CLKCTRL DRA7_CLKCTRL_INDEX(0xa0)
+/* XXX: Compatibility part end. */
+
+/* mpu clocks */
+#define DRA7_MPU_MPU_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
+
+/* dsp1 clocks */
+#define DRA7_DSP1_MMU0_DSP1_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
+
+/* ipu1 clocks */
+#define DRA7_IPU1_MMU_IPU1_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
+
+/* ipu clocks */
+#define DRA7_IPU_CLKCTRL_OFFSET 0x50
+#define DRA7_IPU_CLKCTRL_INDEX(offset) ((offset) - DRA7_IPU_CLKCTRL_OFFSET)
+#define DRA7_IPU_MCASP1_CLKCTRL DRA7_IPU_CLKCTRL_INDEX(0x50)
+#define DRA7_IPU_TIMER5_CLKCTRL DRA7_IPU_CLKCTRL_INDEX(0x58)
+#define DRA7_IPU_TIMER6_CLKCTRL DRA7_IPU_CLKCTRL_INDEX(0x60)
+#define DRA7_IPU_TIMER7_CLKCTRL DRA7_IPU_CLKCTRL_INDEX(0x68)
+#define DRA7_IPU_TIMER8_CLKCTRL DRA7_IPU_CLKCTRL_INDEX(0x70)
+#define DRA7_IPU_I2C5_CLKCTRL DRA7_IPU_CLKCTRL_INDEX(0x78)
+#define DRA7_IPU_UART6_CLKCTRL DRA7_IPU_CLKCTRL_INDEX(0x80)
+
+/* dsp2 clocks */
+#define DRA7_DSP2_MMU0_DSP2_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
+
+/* rtc clocks */
+#define DRA7_RTC_RTCSS_CLKCTRL DRA7_CLKCTRL_INDEX(0x44)
+
+/* coreaon clocks */
+#define DRA7_COREAON_SMARTREFLEX_MPU_CLKCTRL DRA7_CLKCTRL_INDEX(0x28)
+#define DRA7_COREAON_SMARTREFLEX_CORE_CLKCTRL DRA7_CLKCTRL_INDEX(0x38)
+
+/* l3main1 clocks */
+#define DRA7_L3MAIN1_L3_MAIN_1_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
+#define DRA7_L3MAIN1_GPMC_CLKCTRL DRA7_CLKCTRL_INDEX(0x28)
+#define DRA7_L3MAIN1_TPCC_CLKCTRL DRA7_CLKCTRL_INDEX(0x70)
+#define DRA7_L3MAIN1_TPTC0_CLKCTRL DRA7_CLKCTRL_INDEX(0x78)
+#define DRA7_L3MAIN1_TPTC1_CLKCTRL DRA7_CLKCTRL_INDEX(0x80)
+#define DRA7_L3MAIN1_VCP1_CLKCTRL DRA7_CLKCTRL_INDEX(0x88)
+#define DRA7_L3MAIN1_VCP2_CLKCTRL DRA7_CLKCTRL_INDEX(0x90)
+
+/* ipu2 clocks */
+#define DRA7_IPU2_MMU_IPU2_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
+
+/* dma clocks */
+#define DRA7_DMA_DMA_SYSTEM_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
+
+/* emif clocks */
+#define DRA7_EMIF_DMM_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
+
+/* atl clocks */
+#define DRA7_ATL_CLKCTRL_OFFSET 0x0
+#define DRA7_ATL_CLKCTRL_INDEX(offset) ((offset) - DRA7_ATL_CLKCTRL_OFFSET)
+#define DRA7_ATL_ATL_CLKCTRL DRA7_ATL_CLKCTRL_INDEX(0x0)
+
+/* l4cfg clocks */
+#define DRA7_L4CFG_L4_CFG_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
+#define DRA7_L4CFG_SPINLOCK_CLKCTRL DRA7_CLKCTRL_INDEX(0x28)
+#define DRA7_L4CFG_MAILBOX1_CLKCTRL DRA7_CLKCTRL_INDEX(0x30)
+#define DRA7_L4CFG_MAILBOX2_CLKCTRL DRA7_CLKCTRL_INDEX(0x48)
+#define DRA7_L4CFG_MAILBOX3_CLKCTRL DRA7_CLKCTRL_INDEX(0x50)
+#define DRA7_L4CFG_MAILBOX4_CLKCTRL DRA7_CLKCTRL_INDEX(0x58)
+#define DRA7_L4CFG_MAILBOX5_CLKCTRL DRA7_CLKCTRL_INDEX(0x60)
+#define DRA7_L4CFG_MAILBOX6_CLKCTRL DRA7_CLKCTRL_INDEX(0x68)
+#define DRA7_L4CFG_MAILBOX7_CLKCTRL DRA7_CLKCTRL_INDEX(0x70)
+#define DRA7_L4CFG_MAILBOX8_CLKCTRL DRA7_CLKCTRL_INDEX(0x78)
+#define DRA7_L4CFG_MAILBOX9_CLKCTRL DRA7_CLKCTRL_INDEX(0x80)
+#define DRA7_L4CFG_MAILBOX10_CLKCTRL DRA7_CLKCTRL_INDEX(0x88)
+#define DRA7_L4CFG_MAILBOX11_CLKCTRL DRA7_CLKCTRL_INDEX(0x90)
+#define DRA7_L4CFG_MAILBOX12_CLKCTRL DRA7_CLKCTRL_INDEX(0x98)
+#define DRA7_L4CFG_MAILBOX13_CLKCTRL DRA7_CLKCTRL_INDEX(0xa0)
+
+/* l3instr clocks */
+#define DRA7_L3INSTR_L3_MAIN_2_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
+#define DRA7_L3INSTR_L3_INSTR_CLKCTRL DRA7_CLKCTRL_INDEX(0x28)
+
+/* dss clocks */
+#define DRA7_DSS_DSS_CORE_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
+#define DRA7_DSS_BB2D_CLKCTRL DRA7_CLKCTRL_INDEX(0x30)
+
+/* l3init clocks */
+#define DRA7_L3INIT_MMC1_CLKCTRL DRA7_CLKCTRL_INDEX(0x28)
+#define DRA7_L3INIT_MMC2_CLKCTRL DRA7_CLKCTRL_INDEX(0x30)
+#define DRA7_L3INIT_USB_OTG_SS2_CLKCTRL DRA7_CLKCTRL_INDEX(0x40)
+#define DRA7_L3INIT_USB_OTG_SS3_CLKCTRL DRA7_CLKCTRL_INDEX(0x48)
+#define DRA7_L3INIT_USB_OTG_SS4_CLKCTRL DRA7_CLKCTRL_INDEX(0x50)
+#define DRA7_L3INIT_SATA_CLKCTRL DRA7_CLKCTRL_INDEX(0x88)
+#define DRA7_L3INIT_OCP2SCP1_CLKCTRL DRA7_CLKCTRL_INDEX(0xe0)
+#define DRA7_L3INIT_OCP2SCP3_CLKCTRL DRA7_CLKCTRL_INDEX(0xe8)
+#define DRA7_L3INIT_USB_OTG_SS1_CLKCTRL DRA7_CLKCTRL_INDEX(0xf0)
+
+/* pcie clocks */
+#define DRA7_PCIE_CLKCTRL_OFFSET 0xb0
+#define DRA7_PCIE_CLKCTRL_INDEX(offset) ((offset) - DRA7_PCIE_CLKCTRL_OFFSET)
+#define DRA7_PCIE_PCIE1_CLKCTRL DRA7_PCIE_CLKCTRL_INDEX(0xb0)
+#define DRA7_PCIE_PCIE2_CLKCTRL DRA7_PCIE_CLKCTRL_INDEX(0xb8)
+
+/* gmac clocks */
+#define DRA7_GMAC_CLKCTRL_OFFSET 0xd0
+#define DRA7_GMAC_CLKCTRL_INDEX(offset) ((offset) - DRA7_GMAC_CLKCTRL_OFFSET)
+#define DRA7_GMAC_GMAC_CLKCTRL DRA7_GMAC_CLKCTRL_INDEX(0xd0)
+
+/* l4per clocks */
+#define DRA7_L4PER_CLKCTRL_OFFSET 0x28
+#define DRA7_L4PER_CLKCTRL_INDEX(offset) ((offset) - DRA7_L4PER_CLKCTRL_OFFSET)
+#define DRA7_L4PER_TIMER10_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x28)
+#define DRA7_L4PER_TIMER11_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x30)
+#define DRA7_L4PER_TIMER2_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x38)
+#define DRA7_L4PER_TIMER3_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x40)
+#define DRA7_L4PER_TIMER4_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x48)
+#define DRA7_L4PER_TIMER9_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x50)
+#define DRA7_L4PER_ELM_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x58)
+#define DRA7_L4PER_GPIO2_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x60)
+#define DRA7_L4PER_GPIO3_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x68)
+#define DRA7_L4PER_GPIO4_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x70)
+#define DRA7_L4PER_GPIO5_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x78)
+#define DRA7_L4PER_GPIO6_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x80)
+#define DRA7_L4PER_HDQ1W_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x88)
+#define DRA7_L4PER_I2C1_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xa0)
+#define DRA7_L4PER_I2C2_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xa8)
+#define DRA7_L4PER_I2C3_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xb0)
+#define DRA7_L4PER_I2C4_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xb8)
+#define DRA7_L4PER_L4_PER1_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xc0)
+#define DRA7_L4PER_MCSPI1_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xf0)
+#define DRA7_L4PER_MCSPI2_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0xf8)
+#define DRA7_L4PER_MCSPI3_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x100)
+#define DRA7_L4PER_MCSPI4_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x108)
+#define DRA7_L4PER_GPIO7_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x110)
+#define DRA7_L4PER_GPIO8_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x118)
+#define DRA7_L4PER_MMC3_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x120)
+#define DRA7_L4PER_MMC4_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x128)
+#define DRA7_L4PER_UART1_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x140)
+#define DRA7_L4PER_UART2_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x148)
+#define DRA7_L4PER_UART3_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x150)
+#define DRA7_L4PER_UART4_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x158)
+#define DRA7_L4PER_UART5_CLKCTRL DRA7_L4PER_CLKCTRL_INDEX(0x170)
+
+/* l4sec clocks */
+#define DRA7_L4SEC_CLKCTRL_OFFSET 0x1a0
+#define DRA7_L4SEC_CLKCTRL_INDEX(offset) ((offset) - DRA7_L4SEC_CLKCTRL_OFFSET)
+#define DRA7_L4SEC_AES1_CLKCTRL DRA7_L4SEC_CLKCTRL_INDEX(0x1a0)
+#define DRA7_L4SEC_AES2_CLKCTRL DRA7_L4SEC_CLKCTRL_INDEX(0x1a8)
+#define DRA7_L4SEC_DES_CLKCTRL DRA7_L4SEC_CLKCTRL_INDEX(0x1b0)
+#define DRA7_L4SEC_RNG_CLKCTRL DRA7_L4SEC_CLKCTRL_INDEX(0x1c0)
+#define DRA7_L4SEC_SHAM_CLKCTRL DRA7_L4SEC_CLKCTRL_INDEX(0x1c8)
+
+/* l4per2 clocks */
+#define DRA7_L4PER2_CLKCTRL_OFFSET 0xc
+#define DRA7_L4PER2_CLKCTRL_INDEX(offset) ((offset) - DRA7_L4PER2_CLKCTRL_OFFSET)
+#define DRA7_L4PER2_L4_PER2_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0xc)
+#define DRA7_L4PER2_PRUSS1_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x18)
+#define DRA7_L4PER2_PRUSS2_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x20)
+#define DRA7_L4PER2_EPWMSS1_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x90)
+#define DRA7_L4PER2_EPWMSS2_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x98)
+#define DRA7_L4PER2_EPWMSS0_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0xc4)
+#define DRA7_L4PER2_QSPI_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x138)
+#define DRA7_L4PER2_MCASP2_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x160)
+#define DRA7_L4PER2_MCASP3_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x168)
+#define DRA7_L4PER2_MCASP5_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x178)
+#define DRA7_L4PER2_MCASP8_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x190)
+#define DRA7_L4PER2_MCASP4_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x198)
+#define DRA7_L4PER2_UART7_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x1d0)
+#define DRA7_L4PER2_UART8_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x1e0)
+#define DRA7_L4PER2_UART9_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x1e8)
+#define DRA7_L4PER2_DCAN2_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x1f0)
+#define DRA7_L4PER2_MCASP6_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x204)
+#define DRA7_L4PER2_MCASP7_CLKCTRL DRA7_L4PER2_CLKCTRL_INDEX(0x208)
+
+/* l4per3 clocks */
+#define DRA7_L4PER3_CLKCTRL_OFFSET 0x14
+#define DRA7_L4PER3_CLKCTRL_INDEX(offset) ((offset) - DRA7_L4PER3_CLKCTRL_OFFSET)
+#define DRA7_L4PER3_L4_PER3_CLKCTRL DRA7_L4PER3_CLKCTRL_INDEX(0x14)
+#define DRA7_L4PER3_TIMER13_CLKCTRL DRA7_L4PER3_CLKCTRL_INDEX(0xc8)
+#define DRA7_L4PER3_TIMER14_CLKCTRL DRA7_L4PER3_CLKCTRL_INDEX(0xd0)
+#define DRA7_L4PER3_TIMER15_CLKCTRL DRA7_L4PER3_CLKCTRL_INDEX(0xd8)
+#define DRA7_L4PER3_TIMER16_CLKCTRL DRA7_L4PER3_CLKCTRL_INDEX(0x130)
+
+/* wkupaon clocks */
+#define DRA7_WKUPAON_L4_WKUP_CLKCTRL DRA7_CLKCTRL_INDEX(0x20)
+#define DRA7_WKUPAON_WD_TIMER2_CLKCTRL DRA7_CLKCTRL_INDEX(0x30)
+#define DRA7_WKUPAON_GPIO1_CLKCTRL DRA7_CLKCTRL_INDEX(0x38)
+#define DRA7_WKUPAON_TIMER1_CLKCTRL DRA7_CLKCTRL_INDEX(0x40)
+#define DRA7_WKUPAON_TIMER12_CLKCTRL DRA7_CLKCTRL_INDEX(0x48)
+#define DRA7_WKUPAON_COUNTER_32K_CLKCTRL DRA7_CLKCTRL_INDEX(0x50)
+#define DRA7_WKUPAON_UART10_CLKCTRL DRA7_CLKCTRL_INDEX(0x80)
+#define DRA7_WKUPAON_DCAN1_CLKCTRL DRA7_CLKCTRL_INDEX(0x88)
+#define DRA7_WKUPAON_ADC_CLKCTRL DRA7_CLKCTRL_INDEX(0xa0)
+
#endif
--
1.9.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 04/11] clk: ti: clkctrl: support multiple clkctrl nodes under a cm node
2018-08-31 15:06 [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries Tero Kristo
` (2 preceding siblings ...)
2018-08-31 15:06 ` [PATCH 03/11] dt-bindings: clock: dra7xx: " Tero Kristo
@ 2018-08-31 15:07 ` Tero Kristo
2018-10-12 21:25 ` Stephen Boyd
2018-08-31 15:07 ` [PATCH 05/11] clk: ti: clkctrl: replace dashes from clkdm name with underscore Tero Kristo
` (7 subsequent siblings)
11 siblings, 1 reply; 27+ messages in thread
From: Tero Kristo @ 2018-08-31 15:07 UTC (permalink / raw)
To: linux-clk, sboyd, mturquette; +Cc: linux-omap, tony
Currently, only one clkctrl node can be added under a specific CM node
due to limitation with the implementation. Modify the code to pick-up
clockdomain name from the clkctrl node instead of CM node if provided.
Also, add a new flag to the TI clock driver so that both modes can
be supported simultaneously.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
drivers/clk/ti/clk.c | 7 ++++--
drivers/clk/ti/clkctrl.c | 61 +++++++++++++++++++++++++++++++++++-------------
drivers/clk/ti/clock.h | 2 ++
include/linux/clk/ti.h | 1 +
4 files changed, 53 insertions(+), 18 deletions(-)
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 27e0979..8b89be1 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -34,7 +34,7 @@
struct ti_clk_ll_ops *ti_clk_ll_ops;
static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
-static struct ti_clk_features ti_clk_features;
+struct ti_clk_features ti_clk_features;
struct clk_iomap {
struct regmap *regmap;
@@ -140,6 +140,9 @@ void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
int ret;
static bool clkctrl_nodes_missing;
static bool has_clkctrl_data;
+ static bool compat_mode;
+
+ compat_mode = ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT;
for (c = oclks; c->node_name != NULL; c++) {
strcpy(buf, c->node_name);
@@ -164,7 +167,7 @@ void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
continue;
node = of_find_node_by_name(NULL, buf);
- if (num_args) {
+ if (num_args && compat_mode) {
parent = node;
node = of_get_child_by_name(parent, "clk");
of_node_put(parent);
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 421b0539..51cb73a 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -259,8 +259,13 @@ static struct clk_hw *_ti_omap4_clkctrl_xlate(struct of_phandle_args *clkspec,
struct omap_clkctrl_clk *clkctrl_clk;
int ret = 0;
- init.name = kasprintf(GFP_KERNEL, "%s:%s:%04x:%d", node->parent->name,
- node->name, offset, bit);
+ if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
+ init.name = kasprintf(GFP_KERNEL, "%s:%s:%04x:%d",
+ node->parent->name, node->name, offset,
+ bit);
+ else
+ init.name = kasprintf(GFP_KERNEL, "%s:%04x:%d", node->name,
+ offset, bit);
clkctrl_clk = kzalloc(sizeof(*clkctrl_clk), GFP_KERNEL);
if (!init.name || !clkctrl_clk) {
ret = -ENOMEM;
@@ -441,6 +446,10 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
u32 addr;
int ret;
+ if (!(ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) &&
+ !strcmp(node->name, "clk"))
+ ti_clk_features.flags |= TI_CLK_CLKCTRL_COMPAT;
+
addrp = of_get_address(node, 0, NULL, NULL);
addr = (u32)of_translate_address(node, addrp);
@@ -492,19 +501,35 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
provider->base = of_iomap(node, 0);
- provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
- GFP_KERNEL);
- if (!provider->clkdm_name) {
- kfree(provider);
- return;
+ if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) {
+ provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
+ GFP_KERNEL);
+ if (!provider->clkdm_name) {
+ kfree(provider);
+ return;
+ }
+
+ /*
+ * Create default clkdm name, replace _cm from end of parent
+ * node name with _clkdm
+ */
+ strcpy(provider->clkdm_name, node->parent->name);
+ provider->clkdm_name[strlen(provider->clkdm_name) - 2] = 0;
+ } else {
+ provider->clkdm_name = kmalloc(strlen(node->name), GFP_KERNEL);
+ if (!provider->clkdm_name) {
+ kfree(provider);
+ return;
+ }
+
+ /*
+ * Create default clkdm name, replace _clkctrl from end of
+ * node name with _clkdm
+ */
+ strcpy(provider->clkdm_name, node->name);
+ provider->clkdm_name[strlen(provider->clkdm_name) - 7] = 0;
}
- /*
- * Create default clkdm name, replace _cm from end of parent node
- * name with _clkdm
- */
- strcpy(provider->clkdm_name, node->parent->name);
- provider->clkdm_name[strlen(provider->clkdm_name) - 2] = 0;
strcat(provider->clkdm_name, "clkdm");
INIT_LIST_HEAD(&provider->clocks);
@@ -539,9 +564,13 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
init.flags = 0;
if (reg_data->flags & CLKF_SET_RATE_PARENT)
init.flags |= CLK_SET_RATE_PARENT;
- init.name = kasprintf(GFP_KERNEL, "%s:%s:%04x:%d",
- node->parent->name, node->name,
- reg_data->offset, 0);
+ if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
+ init.name = kasprintf(GFP_KERNEL, "%s:%s:%04x:%d",
+ node->parent->name, node->name,
+ reg_data->offset, 0);
+ else
+ init.name = kasprintf(GFP_KERNEL, "%s:%04x:%d",
+ node->name, reg_data->offset, 0);
clkctrl_clk = kzalloc(sizeof(*clkctrl_clk), GFP_KERNEL);
if (!init.name || !clkctrl_clk)
goto cleanup;
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index b582780..ce4aad6 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -233,6 +233,8 @@ int ti_clk_retry_init(struct device_node *node, void *user,
extern const struct clk_ops ti_clk_mux_ops;
extern const struct clk_ops omap_gate_clk_ops;
+extern struct ti_clk_features ti_clk_features;
+
void omap2_init_clk_clkdm(struct clk_hw *hw);
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index a8faa38..3301bd0 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -290,6 +290,7 @@ struct ti_clk_features {
#define TI_CLK_DPLL4_DENY_REPROGRAM BIT(1)
#define TI_CLK_DISABLE_CLKDM_CONTROL BIT(2)
#define TI_CLK_ERRATA_I810 BIT(3)
+#define TI_CLK_CLKCTRL_COMPAT BIT(4)
void ti_clk_setup_features(struct ti_clk_features *features);
const struct ti_clk_features *ti_clk_get_features(void);
--
1.9.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH 04/11] clk: ti: clkctrl: support multiple clkctrl nodes under a cm node
2018-08-31 15:07 ` [PATCH 04/11] clk: ti: clkctrl: support multiple clkctrl nodes under a cm node Tero Kristo
@ 2018-10-12 21:25 ` Stephen Boyd
2018-10-12 21:45 ` Rob Herring
0 siblings, 1 reply; 27+ messages in thread
From: Stephen Boyd @ 2018-10-12 21:25 UTC (permalink / raw)
To: Tero Kristo, linux-clk, mturquette, robh+dt; +Cc: linux-omap, tony
Quoting Tero Kristo (2018-08-31 08:07:00)
> @@ -492,19 +501,35 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
>
> provider->base = of_iomap(node, 0);
>
> - provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
> - GFP_KERNEL);
> - if (!provider->clkdm_name) {
> - kfree(provider);
> - return;
> + if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) {
> + provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
> + GFP_KERNEL);
> + if (!provider->clkdm_name) {
> + kfree(provider);
> + return;
> + }
> +
> + /*
> + * Create default clkdm name, replace _cm from end of parent
> + * node name with _clkdm
> + */
> + strcpy(provider->clkdm_name, node->parent->name);
> + provider->clkdm_name[strlen(provider->clkdm_name) - 2] = 0;
> + } else {
> + provider->clkdm_name = kmalloc(strlen(node->name), GFP_KERNEL);
> + if (!provider->clkdm_name) {
> + kfree(provider);
> + return;
> + }
> +
> + /*
> + * Create default clkdm name, replace _clkctrl from end of
> + * node name with _clkdm
> + */
> + strcpy(provider->clkdm_name, node->name);
> + provider->clkdm_name[strlen(provider->clkdm_name) - 7] = 0;
> }
>
This conflicts with Rob's change so I tried to fix it up. Let me know if
something is horribly wrong with it. I suspect Rob will need to figure
out how to make node::name usage go away again, but I put it back.
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH 04/11] clk: ti: clkctrl: support multiple clkctrl nodes under a cm node
2018-10-12 21:25 ` Stephen Boyd
@ 2018-10-12 21:45 ` Rob Herring
2018-10-12 22:03 ` Stephen Boyd
0 siblings, 1 reply; 27+ messages in thread
From: Rob Herring @ 2018-10-12 21:45 UTC (permalink / raw)
To: Stephen Boyd
Cc: Tero Kristo, linux-clk, Michael Turquette, linux-omap, Tony Lindgren
On Fri, Oct 12, 2018 at 4:25 PM Stephen Boyd <sboyd@kernel.org> wrote:
>
> Quoting Tero Kristo (2018-08-31 08:07:00)
> > @@ -492,19 +501,35 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
> >
> > provider->base = of_iomap(node, 0);
> >
> > - provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
> > - GFP_KERNEL);
> > - if (!provider->clkdm_name) {
> > - kfree(provider);
> > - return;
> > + if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) {
> > + provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
> > + GFP_KERNEL);
> > + if (!provider->clkdm_name) {
> > + kfree(provider);
> > + return;
> > + }
> > +
> > + /*
> > + * Create default clkdm name, replace _cm from end of parent
> > + * node name with _clkdm
> > + */
> > + strcpy(provider->clkdm_name, node->parent->name);
kasprintf can replace kmalloc, strlen and strcpy here and remove the
direct access of .name in the process.
> > + provider->clkdm_name[strlen(provider->clkdm_name) - 2] = 0;
> > + } else {
> > + provider->clkdm_name = kmalloc(strlen(node->name), GFP_KERNEL);
> > + if (!provider->clkdm_name) {
> > + kfree(provider);
> > + return;
> > + }
> > +
> > + /*
> > + * Create default clkdm name, replace _clkctrl from end of
> > + * node name with _clkdm
> > + */
> > + strcpy(provider->clkdm_name, node->name);
and here.
> > + provider->clkdm_name[strlen(provider->clkdm_name) - 7] = 0;
> > }
> >
>
> This conflicts with Rob's change so I tried to fix it up. Let me know if
> something is horribly wrong with it. I suspect Rob will need to figure
> out how to make node::name usage go away again, but I put it back.
Then I don't have to find and fix. :)
Rob
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH 04/11] clk: ti: clkctrl: support multiple clkctrl nodes under a cm node
2018-10-12 21:45 ` Rob Herring
@ 2018-10-12 22:03 ` Stephen Boyd
2018-10-15 15:58 ` Tero Kristo
0 siblings, 1 reply; 27+ messages in thread
From: Stephen Boyd @ 2018-10-12 22:03 UTC (permalink / raw)
To: Rob Herring
Cc: Tero Kristo, linux-clk, Michael Turquette, linux-omap, Tony Lindgren
Quoting Rob Herring (2018-10-12 14:45:08)
> On Fri, Oct 12, 2018 at 4:25 PM Stephen Boyd <sboyd@kernel.org> wrote:
> >
> > Quoting Tero Kristo (2018-08-31 08:07:00)
> > > @@ -492,19 +501,35 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
> > >
> > > provider->base = of_iomap(node, 0);
> > >
> > > - provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
> > > - GFP_KERNEL);
> > > - if (!provider->clkdm_name) {
> > > - kfree(provider);
> > > - return;
> > > + if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) {
> > > + provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
> > > + GFP_KERNEL);
> > > + if (!provider->clkdm_name) {
> > > + kfree(provider);
> > > + return;
> > > + }
> > > +
> > > + /*
> > > + * Create default clkdm name, replace _cm from end of parent
> > > + * node name with _clkdm
> > > + */
> > > + strcpy(provider->clkdm_name, node->parent->name);
>
> kasprintf can replace kmalloc, strlen and strcpy here and remove the
> direct access of .name in the process.
>
> > > + provider->clkdm_name[strlen(provider->clkdm_name) - 2] = 0;
> > > + } else {
> > > + provider->clkdm_name = kmalloc(strlen(node->name), GFP_KERNEL);
> > > + if (!provider->clkdm_name) {
> > > + kfree(provider);
> > > + return;
> > > + }
> > > +
> > > + /*
> > > + * Create default clkdm name, replace _clkctrl from end of
> > > + * node name with _clkdm
> > > + */
> > > + strcpy(provider->clkdm_name, node->name);
>
> and here.
>
> > > + provider->clkdm_name[strlen(provider->clkdm_name) - 7] = 0;
> > > }
> > >
> >
> > This conflicts with Rob's change so I tried to fix it up. Let me know if
> > something is horribly wrong with it. I suspect Rob will need to figure
> > out how to make node::name usage go away again, but I put it back.
>
> Then I don't have to find and fix. :)
>
Can you send a patch? Otherwise I will try and fix this up tomorrow.
You can use this git tree for reference:
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-ti
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH 04/11] clk: ti: clkctrl: support multiple clkctrl nodes under a cm node
2018-10-12 22:03 ` Stephen Boyd
@ 2018-10-15 15:58 ` Tero Kristo
2018-10-15 23:38 ` Stephen Boyd
0 siblings, 1 reply; 27+ messages in thread
From: Tero Kristo @ 2018-10-15 15:58 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: linux-clk, Michael Turquette, linux-omap, Tony Lindgren
On 13/10/18 01:03, Stephen Boyd wrote:
> Quoting Rob Herring (2018-10-12 14:45:08)
>> On Fri, Oct 12, 2018 at 4:25 PM Stephen Boyd <sboyd@kernel.org> wrote:
>>>
>>> Quoting Tero Kristo (2018-08-31 08:07:00)
>>>> @@ -492,19 +501,35 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
>>>>
>>>> provider->base = of_iomap(node, 0);
>>>>
>>>> - provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
>>>> - GFP_KERNEL);
>>>> - if (!provider->clkdm_name) {
>>>> - kfree(provider);
>>>> - return;
>>>> + if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) {
>>>> + provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
>>>> + GFP_KERNEL);
>>>> + if (!provider->clkdm_name) {
>>>> + kfree(provider);
>>>> + return;
>>>> + }
>>>> +
>>>> + /*
>>>> + * Create default clkdm name, replace _cm from end of parent
>>>> + * node name with _clkdm
>>>> + */
>>>> + strcpy(provider->clkdm_name, node->parent->name);
>>
>> kasprintf can replace kmalloc, strlen and strcpy here and remove the
>> direct access of .name in the process.
>>
>>>> + provider->clkdm_name[strlen(provider->clkdm_name) - 2] = 0;
>>>> + } else {
>>>> + provider->clkdm_name = kmalloc(strlen(node->name), GFP_KERNEL);
>>>> + if (!provider->clkdm_name) {
>>>> + kfree(provider);
>>>> + return;
>>>> + }
>>>> +
>>>> + /*
>>>> + * Create default clkdm name, replace _clkctrl from end of
>>>> + * node name with _clkdm
>>>> + */
>>>> + strcpy(provider->clkdm_name, node->name);
>>
>> and here.
>>
>>>> + provider->clkdm_name[strlen(provider->clkdm_name) - 7] = 0;
>>>> }
>>>>
>>>
>>> This conflicts with Rob's change so I tried to fix it up. Let me know if
>>> something is horribly wrong with it. I suspect Rob will need to figure
>>> out how to make node::name usage go away again, but I put it back.
>>
>> Then I don't have to find and fix. :)
>>
>
> Can you send a patch? Otherwise I will try and fix this up tomorrow.
> You can use this git tree for reference:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-ti
>
Sorry, I've also been OoO for last week, just captured this.
Do you need help on this one? I can take a look at it tomorrow if there
is a specific merge conflict you want me to take a look at.
-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH 04/11] clk: ti: clkctrl: support multiple clkctrl nodes under a cm node
2018-10-15 15:58 ` Tero Kristo
@ 2018-10-15 23:38 ` Stephen Boyd
2018-10-16 7:37 ` Tero Kristo
0 siblings, 1 reply; 27+ messages in thread
From: Stephen Boyd @ 2018-10-15 23:38 UTC (permalink / raw)
To: Rob Herring, Tero Kristo
Cc: linux-clk, Michael Turquette, linux-omap, Tony Lindgren
Quoting Tero Kristo (2018-10-15 08:58:21)
> On 13/10/18 01:03, Stephen Boyd wrote:
> > Quoting Rob Herring (2018-10-12 14:45:08)
> >> On Fri, Oct 12, 2018 at 4:25 PM Stephen Boyd <sboyd@kernel.org> wrote:
> >>>
> >>> Quoting Tero Kristo (2018-08-31 08:07:00)
> >>>> @@ -492,19 +501,35 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
> >>>>
> >>>> provider->base = of_iomap(node, 0);
> >>>>
> >>>> - provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
> >>>> - GFP_KERNEL);
> >>>> - if (!provider->clkdm_name) {
> >>>> - kfree(provider);
> >>>> - return;
> >>>> + if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) {
> >>>> + provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
> >>>> + GFP_KERNEL);
> >>>> + if (!provider->clkdm_name) {
> >>>> + kfree(provider);
> >>>> + return;
> >>>> + }
> >>>> +
> >>>> + /*
> >>>> + * Create default clkdm name, replace _cm from end of parent
> >>>> + * node name with _clkdm
> >>>> + */
> >>>> + strcpy(provider->clkdm_name, node->parent->name);
> >>
> >> kasprintf can replace kmalloc, strlen and strcpy here and remove the
> >> direct access of .name in the process.
> >>
> >>>> + provider->clkdm_name[strlen(provider->clkdm_name) - 2] = 0;
> >>>> + } else {
> >>>> + provider->clkdm_name = kmalloc(strlen(node->name), GFP_KERNEL);
> >>>> + if (!provider->clkdm_name) {
> >>>> + kfree(provider);
> >>>> + return;
> >>>> + }
> >>>> +
> >>>> + /*
> >>>> + * Create default clkdm name, replace _clkctrl from end of
> >>>> + * node name with _clkdm
> >>>> + */
> >>>> + strcpy(provider->clkdm_name, node->name);
> >>
> >> and here.
> >>
> >>>> + provider->clkdm_name[strlen(provider->clkdm_name) - 7] = 0;
> >>>> }
> >>>>
> >>>
> >>> This conflicts with Rob's change so I tried to fix it up. Let me know if
> >>> something is horribly wrong with it. I suspect Rob will need to figure
> >>> out how to make node::name usage go away again, but I put it back.
> >>
> >> Then I don't have to find and fix. :)
> >>
> >
> > Can you send a patch? Otherwise I will try and fix this up tomorrow.
> > You can use this git tree for reference:
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-ti
> >
>
> Sorry, I've also been OoO for last week, just captured this.
>
> Do you need help on this one? I can take a look at it tomorrow if there
> is a specific merge conflict you want me to take a look at.
This is what I got:
----8<---
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 955f2e26ab00..78deca44789d 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -520,8 +520,7 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
provider->base = of_iomap(node, 0);
if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) {
- provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
- GFP_KERNEL);
+ provider->clkdm_name = kasprintf(GFP_KERNEL, "%pOFn%s", node->parent, "xxx");
if (!provider->clkdm_name) {
kfree(provider);
return;
@@ -531,10 +530,9 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
* Create default clkdm name, replace _cm from end of parent
* node name with _clkdm
*/
- strcpy(provider->clkdm_name, node->parent->name);
- provider->clkdm_name[strlen(provider->clkdm_name) - 2] = 0;
+ provider->clkdm_name[strlen(provider->clkdm_name) - 5] = 0;
} else {
- provider->clkdm_name = kmalloc(strlen(node->name), GFP_KERNEL);
+ provider->clkdm_name = kasprintf(GFP_KERNEL, "%pOFn", node->name);
if (!provider->clkdm_name) {
kfree(provider);
return;
@@ -544,7 +542,6 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
* Create default clkdm name, replace _clkctrl from end of
* node name with _clkdm
*/
- strcpy(provider->clkdm_name, node->name);
provider->clkdm_name[strlen(provider->clkdm_name) - 7] = 0;
}
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH 04/11] clk: ti: clkctrl: support multiple clkctrl nodes under a cm node
2018-10-15 23:38 ` Stephen Boyd
@ 2018-10-16 7:37 ` Tero Kristo
2018-10-16 15:37 ` Stephen Boyd
0 siblings, 1 reply; 27+ messages in thread
From: Tero Kristo @ 2018-10-16 7:37 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: linux-clk, Michael Turquette, linux-omap, Tony Lindgren
On 16/10/18 02:38, Stephen Boyd wrote:
> Quoting Tero Kristo (2018-10-15 08:58:21)
>> On 13/10/18 01:03, Stephen Boyd wrote:
>>> Quoting Rob Herring (2018-10-12 14:45:08)
>>>> On Fri, Oct 12, 2018 at 4:25 PM Stephen Boyd <sboyd@kernel.org> wrote:
>>>>>
>>>>> Quoting Tero Kristo (2018-08-31 08:07:00)
>>>>>> @@ -492,19 +501,35 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
>>>>>>
>>>>>> provider->base = of_iomap(node, 0);
>>>>>>
>>>>>> - provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
>>>>>> - GFP_KERNEL);
>>>>>> - if (!provider->clkdm_name) {
>>>>>> - kfree(provider);
>>>>>> - return;
>>>>>> + if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) {
>>>>>> + provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
>>>>>> + GFP_KERNEL);
>>>>>> + if (!provider->clkdm_name) {
>>>>>> + kfree(provider);
>>>>>> + return;
>>>>>> + }
>>>>>> +
>>>>>> + /*
>>>>>> + * Create default clkdm name, replace _cm from end of parent
>>>>>> + * node name with _clkdm
>>>>>> + */
>>>>>> + strcpy(provider->clkdm_name, node->parent->name);
>>>>
>>>> kasprintf can replace kmalloc, strlen and strcpy here and remove the
>>>> direct access of .name in the process.
>>>>
>>>>>> + provider->clkdm_name[strlen(provider->clkdm_name) - 2] = 0;
>>>>>> + } else {
>>>>>> + provider->clkdm_name = kmalloc(strlen(node->name), GFP_KERNEL);
>>>>>> + if (!provider->clkdm_name) {
>>>>>> + kfree(provider);
>>>>>> + return;
>>>>>> + }
>>>>>> +
>>>>>> + /*
>>>>>> + * Create default clkdm name, replace _clkctrl from end of
>>>>>> + * node name with _clkdm
>>>>>> + */
>>>>>> + strcpy(provider->clkdm_name, node->name);
>>>>
>>>> and here.
>>>>
>>>>>> + provider->clkdm_name[strlen(provider->clkdm_name) - 7] = 0;
>>>>>> }
>>>>>>
>>>>>
>>>>> This conflicts with Rob's change so I tried to fix it up. Let me know if
>>>>> something is horribly wrong with it. I suspect Rob will need to figure
>>>>> out how to make node::name usage go away again, but I put it back.
>>>>
>>>> Then I don't have to find and fix. :)
>>>>
>>>
>>> Can you send a patch? Otherwise I will try and fix this up tomorrow.
>>> You can use this git tree for reference:
>>>
>>> https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-ti
>>>
>>
>> Sorry, I've also been OoO for last week, just captured this.
>>
>> Do you need help on this one? I can take a look at it tomorrow if there
>> is a specific merge conflict you want me to take a look at.
>
> This is what I got:
Ok that looks fine except one detail below:
>
> ----8<---
> diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
> index 955f2e26ab00..78deca44789d 100644
> --- a/drivers/clk/ti/clkctrl.c
> +++ b/drivers/clk/ti/clkctrl.c
> @@ -520,8 +520,7 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
> provider->base = of_iomap(node, 0);
>
> if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) {
> - provider->clkdm_name = kmalloc(strlen(node->parent->name) + 3,
> - GFP_KERNEL);
> + provider->clkdm_name = kasprintf(GFP_KERNEL, "%pOFn%s", node->parent, "xxx");
> if (!provider->clkdm_name) {
> kfree(provider);
> return;
> @@ -531,10 +530,9 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
> * Create default clkdm name, replace _cm from end of parent
> * node name with _clkdm
> */
> - strcpy(provider->clkdm_name, node->parent->name);
> - provider->clkdm_name[strlen(provider->clkdm_name) - 2] = 0;
> + provider->clkdm_name[strlen(provider->clkdm_name) - 5] = 0;
> } else {
> - provider->clkdm_name = kmalloc(strlen(node->name), GFP_KERNEL);
> + provider->clkdm_name = kasprintf(GFP_KERNEL, "%pOFn", node->name);
should be:
+ provider->clkdm_name = kasprintf(GFP_KERNEL, "%pOFn", node);
...instead right?
-Tero
> if (!provider->clkdm_name) {
> kfree(provider);
> return;
> @@ -544,7 +542,6 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
> * Create default clkdm name, replace _clkctrl from end of
> * node name with _clkdm
> */
> - strcpy(provider->clkdm_name, node->name);
> provider->clkdm_name[strlen(provider->clkdm_name) - 7] = 0;
> }
>
>
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH 04/11] clk: ti: clkctrl: support multiple clkctrl nodes under a cm node
2018-10-16 7:37 ` Tero Kristo
@ 2018-10-16 15:37 ` Stephen Boyd
0 siblings, 0 replies; 27+ messages in thread
From: Stephen Boyd @ 2018-10-16 15:37 UTC (permalink / raw)
To: Rob Herring, Tero Kristo
Cc: linux-clk, Michael Turquette, linux-omap, Tony Lindgren
Quoting Tero Kristo (2018-10-16 00:37:06)
> On 16/10/18 02:38, Stephen Boyd wrote:
> > return;
> > @@ -531,10 +530,9 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
> > * Create default clkdm name, replace _cm from end of parent
> > * node name with _clkdm
> > */
> > - strcpy(provider->clkdm_name, node->parent->name);
> > - provider->clkdm_name[strlen(provider->clkdm_name) - 2] = 0;
> > + provider->clkdm_name[strlen(provider->clkdm_name) - 5] = 0;
> > } else {
> > - provider->clkdm_name = kmalloc(strlen(node->name), GFP_KERNEL);
> > + provider->clkdm_name = kasprintf(GFP_KERNEL, "%pOFn", node->name);
>
> should be:
>
> + provider->clkdm_name = kasprintf(GFP_KERNEL, "%pOFn", node);
>
> ...instead right?
>
Yes. Thanks for catching it!
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 05/11] clk: ti: clkctrl: replace dashes from clkdm name with underscore
2018-08-31 15:06 [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries Tero Kristo
` (3 preceding siblings ...)
2018-08-31 15:07 ` [PATCH 04/11] clk: ti: clkctrl: support multiple clkctrl nodes under a cm node Tero Kristo
@ 2018-08-31 15:07 ` Tero Kristo
2018-08-31 15:07 ` [PATCH 06/11] clk: ti: am33xx: rename existing clkctrl data as compat data Tero Kristo
` (6 subsequent siblings)
11 siblings, 0 replies; 27+ messages in thread
From: Tero Kristo @ 2018-08-31 15:07 UTC (permalink / raw)
To: linux-clk, sboyd, mturquette; +Cc: linux-omap, tony
The change in the DTS data node naming prevents using underscore
within the node names and force usage of dash instead. On the other
hand, clockdomains use underscore instead of dash, so this must be
replaced within the driver code so that the mapping between the two
can be done properly.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
drivers/clk/ti/clkctrl.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 51cb73a..a227f4b 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -445,6 +445,7 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
const __be32 *addrp;
u32 addr;
int ret;
+ char *c;
if (!(ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) &&
!strcmp(node->name, "clk"))
@@ -532,6 +533,15 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
strcat(provider->clkdm_name, "clkdm");
+ /* Replace any dash from the clkdm name with underscore */
+ c = provider->clkdm_name;
+
+ while (*c) {
+ if (*c == '-')
+ *c = '_';
+ c++;
+ }
+
INIT_LIST_HEAD(&provider->clocks);
/* Generate clocks */
--
1.9.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 06/11] clk: ti: am33xx: rename existing clkctrl data as compat data
2018-08-31 15:06 [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries Tero Kristo
` (4 preceding siblings ...)
2018-08-31 15:07 ` [PATCH 05/11] clk: ti: clkctrl: replace dashes from clkdm name with underscore Tero Kristo
@ 2018-08-31 15:07 ` Tero Kristo
2018-08-31 15:07 ` [PATCH 07/11] clk: ti: am33xx: add new clkctrl data for am33xx Tero Kristo
` (5 subsequent siblings)
11 siblings, 0 replies; 27+ messages in thread
From: Tero Kristo @ 2018-08-31 15:07 UTC (permalink / raw)
To: linux-clk, sboyd, mturquette; +Cc: linux-omap, tony
Rename the existing clkctrl data in preparation of upcoming clkdm
based split for it. Once the DT data has transitioned also, the
compat data can be removed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
drivers/clk/ti/Makefile | 3 +-
drivers/clk/ti/{clk-33xx.c => clk-33xx-compat.c} | 57 +------
drivers/clk/ti/clk-33xx.c | 196 +----------------------
drivers/clk/ti/clkctrl.c | 2 +-
drivers/clk/ti/clock.h | 3 +-
5 files changed, 8 insertions(+), 253 deletions(-)
copy drivers/clk/ti/{clk-33xx.c => clk-33xx-compat.c} (84%)
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 5ab295d..0ff5a253 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -6,7 +6,8 @@ clk-common = dpll.o composite.o divider.o gate.o \
fixed-factor.o mux.o apll.o \
clkt_dpll.o clkt_iclk.o clkt_dflt.o \
clkctrl.o
-obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o dpll3xxx.o
+obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o dpll3xxx.o \
+ clk-33xx-compat.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-814x.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o \
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx-compat.c
similarity index 84%
copy from drivers/clk/ti/clk-33xx.c
copy to drivers/clk/ti/clk-33xx-compat.c
index 12e0a2d..3e07f12 100644
--- a/drivers/clk/ti/clk-33xx.c
+++ b/drivers/clk/ti/clk-33xx-compat.c
@@ -190,7 +190,7 @@
{ 0 },
};
-const struct omap_clkctrl_data am3_clkctrl_data[] __initconst = {
+const struct omap_clkctrl_data am3_clkctrl_compat_data[] __initconst = {
{ 0x44e00014, am3_l4_per_clkctrl_regs },
{ 0x44e00404, am3_l4_wkup_clkctrl_regs },
{ 0x44e00604, am3_mpu_clkctrl_regs },
@@ -200,7 +200,7 @@
{ 0 },
};
-static struct ti_dt_clk am33xx_clks[] = {
+struct ti_dt_clk am33xx_compat_clks[] = {
DT_CLK(NULL, "timer_32k_ck", "l4_per_cm:0138:0"),
DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
DT_CLK(NULL, "clkdiv32k_ick", "l4_per_cm:0138:0"),
@@ -216,56 +216,3 @@
DT_CLK(NULL, "trace_pmd_clk_mux_ck", "l4_wkup_cm:0010:20"),
{ .node_name = NULL },
};
-
-static const char *enable_init_clks[] = {
- "dpll_ddr_m2_ck",
- "dpll_mpu_m2_ck",
- "l3_gclk",
- "l4hs_gclk",
- "l4fw_gclk",
- "l4ls_gclk",
- /* Required for external peripherals like, Audio codecs */
- "clkout2_ck",
-};
-
-int __init am33xx_dt_clk_init(void)
-{
- struct clk *clk1, *clk2;
-
- ti_dt_clocks_register(am33xx_clks);
-
- omap2_clk_disable_autoidle_all();
-
- ti_clk_add_aliases();
-
- omap2_clk_enable_init_clocks(enable_init_clks,
- ARRAY_SIZE(enable_init_clks));
-
- /* TRM ERRATA: Timer 3 & 6 default parent (TCLKIN) may not be always
- * physically present, in such a case HWMOD enabling of
- * clock would be failure with default parent. And timer
- * probe thinks clock is already enabled, this leads to
- * crash upon accessing timer 3 & 6 registers in probe.
- * Fix by setting parent of both these timers to master
- * oscillator clock.
- */
-
- clk1 = clk_get_sys(NULL, "sys_clkin_ck");
- clk2 = clk_get_sys(NULL, "timer3_fck");
- clk_set_parent(clk2, clk1);
-
- clk2 = clk_get_sys(NULL, "timer6_fck");
- clk_set_parent(clk2, clk1);
- /*
- * The On-Chip 32K RC Osc clock is not an accurate clock-source as per
- * the design/spec, so as a result, for example, timer which supposed
- * to get expired @60Sec, but will expire somewhere ~@40Sec, which is
- * not expected by any use-case, so change WDT1 clock source to PRCM
- * 32KHz clock.
- */
- clk1 = clk_get_sys(NULL, "wdt1_fck");
- clk2 = clk_get_sys(NULL, "clkdiv32k_ick");
- clk_set_parent(clk1, clk2);
-
- return 0;
-}
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
index 12e0a2d..b43c003 100644
--- a/drivers/clk/ti/clk-33xx.c
+++ b/drivers/clk/ti/clk-33xx.c
@@ -23,200 +23,6 @@
#include "clock.h"
-static const char * const am3_gpio1_dbclk_parents[] __initconst = {
- "l4_per_cm:clk:0138:0",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data am3_gpio2_bit_data[] __initconst = {
- { 18, TI_CLK_GATE, am3_gpio1_dbclk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data am3_gpio3_bit_data[] __initconst = {
- { 18, TI_CLK_GATE, am3_gpio1_dbclk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data am3_gpio4_bit_data[] __initconst = {
- { 18, TI_CLK_GATE, am3_gpio1_dbclk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data am3_l4_per_clkctrl_regs[] __initconst = {
- { AM3_CPGMAC0_CLKCTRL, NULL, CLKF_SW_SUP, "cpsw_125mhz_gclk", "cpsw_125mhz_clkdm" },
- { AM3_LCDC_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_SET_RATE_PARENT, "lcd_gclk", "lcdc_clkdm" },
- { AM3_USB_OTG_HS_CLKCTRL, NULL, CLKF_SW_SUP, "usbotg_fck", "l3s_clkdm" },
- { AM3_TPTC0_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM3_EMIF_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_ddr_m2_div2_ck", "l3_clkdm" },
- { AM3_OCMCRAM_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM3_GPMC_CLKCTRL, NULL, CLKF_SW_SUP, "l3s_gclk", "l3s_clkdm" },
- { AM3_MCASP0_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp0_fck", "l3s_clkdm" },
- { AM3_UART6_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM3_MMC1_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
- { AM3_ELM_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM3_I2C3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM3_I2C2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM3_SPI0_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM3_SPI1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM3_L4_LS_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM3_MCASP1_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp1_fck", "l3s_clkdm" },
- { AM3_UART2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM3_UART3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM3_UART4_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM3_UART5_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM3_TIMER7_CLKCTRL, NULL, CLKF_SW_SUP, "timer7_fck" },
- { AM3_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "timer2_fck" },
- { AM3_TIMER3_CLKCTRL, NULL, CLKF_SW_SUP, "timer3_fck" },
- { AM3_TIMER4_CLKCTRL, NULL, CLKF_SW_SUP, "timer4_fck" },
- { AM3_RNG_CLKCTRL, NULL, CLKF_SW_SUP, "rng_fck" },
- { AM3_AES_CLKCTRL, NULL, CLKF_SW_SUP, "aes0_fck", "l3_clkdm" },
- { AM3_SHAM_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM3_GPIO2_CLKCTRL, am3_gpio2_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
- { AM3_GPIO3_CLKCTRL, am3_gpio3_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
- { AM3_GPIO4_CLKCTRL, am3_gpio4_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
- { AM3_TPCC_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM3_D_CAN0_CLKCTRL, NULL, CLKF_SW_SUP, "dcan0_fck" },
- { AM3_D_CAN1_CLKCTRL, NULL, CLKF_SW_SUP, "dcan1_fck" },
- { AM3_EPWMSS1_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM3_EPWMSS0_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM3_EPWMSS2_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM3_L3_INSTR_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM3_L3_MAIN_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM3_PRUSS_CLKCTRL, NULL, CLKF_SW_SUP, "pruss_ocp_gclk", "pruss_ocp_clkdm" },
- { AM3_TIMER5_CLKCTRL, NULL, CLKF_SW_SUP, "timer5_fck" },
- { AM3_TIMER6_CLKCTRL, NULL, CLKF_SW_SUP, "timer6_fck" },
- { AM3_MMC2_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
- { AM3_MMC3_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk", "l3s_clkdm" },
- { AM3_TPTC1_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM3_TPTC2_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM3_SPINLOCK_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM3_MAILBOX_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM3_L4_HS_CLKCTRL, NULL, CLKF_SW_SUP, "l4hs_gclk", "l4hs_clkdm" },
- { AM3_OCPWP_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM3_CLKDIV32K_CLKCTRL, NULL, CLKF_SW_SUP, "clkdiv32k_ck", "clk_24mhz_clkdm" },
- { 0 },
-};
-
-static const char * const am3_gpio0_dbclk_parents[] __initconst = {
- "gpio0_dbclk_mux_ck",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data am3_gpio1_bit_data[] __initconst = {
- { 18, TI_CLK_GATE, am3_gpio0_dbclk_parents, NULL },
- { 0 },
-};
-
-static const char * const am3_dbg_sysclk_ck_parents[] __initconst = {
- "sys_clkin_ck",
- NULL,
-};
-
-static const char * const am3_trace_pmd_clk_mux_ck_parents[] __initconst = {
- "l4_wkup_cm:clk:0010:19",
- "l4_wkup_cm:clk:0010:30",
- NULL,
-};
-
-static const char * const am3_trace_clk_div_ck_parents[] __initconst = {
- "l4_wkup_cm:clk:0010:20",
- NULL,
-};
-
-static const struct omap_clkctrl_div_data am3_trace_clk_div_ck_data __initconst = {
- .max_div = 64,
- .flags = CLK_DIVIDER_POWER_OF_TWO,
-};
-
-static const char * const am3_stm_clk_div_ck_parents[] __initconst = {
- "l4_wkup_cm:clk:0010:22",
- NULL,
-};
-
-static const struct omap_clkctrl_div_data am3_stm_clk_div_ck_data __initconst = {
- .max_div = 64,
- .flags = CLK_DIVIDER_POWER_OF_TWO,
-};
-
-static const char * const am3_dbg_clka_ck_parents[] __initconst = {
- "dpll_core_m4_ck",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data am3_debugss_bit_data[] __initconst = {
- { 19, TI_CLK_GATE, am3_dbg_sysclk_ck_parents, NULL },
- { 20, TI_CLK_MUX, am3_trace_pmd_clk_mux_ck_parents, NULL },
- { 22, TI_CLK_MUX, am3_trace_pmd_clk_mux_ck_parents, NULL },
- { 24, TI_CLK_DIVIDER, am3_trace_clk_div_ck_parents, &am3_trace_clk_div_ck_data },
- { 27, TI_CLK_DIVIDER, am3_stm_clk_div_ck_parents, &am3_stm_clk_div_ck_data },
- { 30, TI_CLK_GATE, am3_dbg_clka_ck_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data am3_l4_wkup_clkctrl_regs[] __initconst = {
- { AM3_CONTROL_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_core_m4_div2_ck" },
- { AM3_GPIO1_CLKCTRL, am3_gpio1_bit_data, CLKF_SW_SUP, "dpll_core_m4_div2_ck" },
- { AM3_L4_WKUP_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_core_m4_div2_ck" },
- { AM3_DEBUGSS_CLKCTRL, am3_debugss_bit_data, CLKF_SW_SUP, "l4_wkup_cm:clk:0010:24", "l3_aon_clkdm" },
- { AM3_WKUP_M3_CLKCTRL, NULL, CLKF_NO_IDLEST, "dpll_core_m4_div2_ck", "l4_wkup_aon_clkdm" },
- { AM3_UART1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_wkupdm_ck" },
- { AM3_I2C1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_wkupdm_ck" },
- { AM3_ADC_TSC_CLKCTRL, NULL, CLKF_SW_SUP, "adc_tsc_fck" },
- { AM3_SMARTREFLEX0_CLKCTRL, NULL, CLKF_SW_SUP, "smartreflex0_fck" },
- { AM3_TIMER1_CLKCTRL, NULL, CLKF_SW_SUP, "timer1_fck" },
- { AM3_SMARTREFLEX1_CLKCTRL, NULL, CLKF_SW_SUP, "smartreflex1_fck" },
- { AM3_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "wdt1_fck" },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data am3_mpu_clkctrl_regs[] __initconst = {
- { AM3_MPU_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_mpu_m2_ck" },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data am3_l4_rtc_clkctrl_regs[] __initconst = {
- { AM3_RTC_CLKCTRL, NULL, CLKF_SW_SUP, "clk_32768_ck" },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data am3_gfx_l3_clkctrl_regs[] __initconst = {
- { AM3_GFX_CLKCTRL, NULL, CLKF_SW_SUP, "gfx_fck_div_ck" },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data am3_l4_cefuse_clkctrl_regs[] __initconst = {
- { AM3_CEFUSE_CLKCTRL, NULL, CLKF_SW_SUP, "sys_clkin_ck" },
- { 0 },
-};
-
-const struct omap_clkctrl_data am3_clkctrl_data[] __initconst = {
- { 0x44e00014, am3_l4_per_clkctrl_regs },
- { 0x44e00404, am3_l4_wkup_clkctrl_regs },
- { 0x44e00604, am3_mpu_clkctrl_regs },
- { 0x44e00800, am3_l4_rtc_clkctrl_regs },
- { 0x44e00904, am3_gfx_l3_clkctrl_regs },
- { 0x44e00a20, am3_l4_cefuse_clkctrl_regs },
- { 0 },
-};
-
-static struct ti_dt_clk am33xx_clks[] = {
- DT_CLK(NULL, "timer_32k_ck", "l4_per_cm:0138:0"),
- DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
- DT_CLK(NULL, "clkdiv32k_ick", "l4_per_cm:0138:0"),
- DT_CLK(NULL, "dbg_clka_ck", "l4_wkup_cm:0010:30"),
- DT_CLK(NULL, "dbg_sysclk_ck", "l4_wkup_cm:0010:19"),
- DT_CLK(NULL, "gpio0_dbclk", "l4_wkup_cm:0004:18"),
- DT_CLK(NULL, "gpio1_dbclk", "l4_per_cm:0098:18"),
- DT_CLK(NULL, "gpio2_dbclk", "l4_per_cm:009c:18"),
- DT_CLK(NULL, "gpio3_dbclk", "l4_per_cm:00a0:18"),
- DT_CLK(NULL, "stm_clk_div_ck", "l4_wkup_cm:0010:27"),
- DT_CLK(NULL, "stm_pmd_clock_mux_ck", "l4_wkup_cm:0010:22"),
- DT_CLK(NULL, "trace_clk_div_ck", "l4_wkup_cm:0010:24"),
- DT_CLK(NULL, "trace_pmd_clk_mux_ck", "l4_wkup_cm:0010:20"),
- { .node_name = NULL },
-};
-
static const char *enable_init_clks[] = {
"dpll_ddr_m2_ck",
"dpll_mpu_m2_ck",
@@ -232,7 +38,7 @@ int __init am33xx_dt_clk_init(void)
{
struct clk *clk1, *clk2;
- ti_dt_clocks_register(am33xx_clks);
+ ti_dt_clocks_register(am33xx_compat_clks);
omap2_clk_disable_autoidle_all();
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index a227f4b..00199fe 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -468,7 +468,7 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
#endif
#ifdef CONFIG_SOC_AM33XX
if (of_machine_is_compatible("ti,am33xx"))
- data = am3_clkctrl_data;
+ data = am3_clkctrl_compat_data;
#endif
#ifdef CONFIG_SOC_AM43XX
if (of_machine_is_compatible("ti,am4372"))
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index ce4aad6..b614f76 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -184,7 +184,8 @@ struct omap_clkctrl_data {
extern const struct omap_clkctrl_data omap4_clkctrl_data[];
extern const struct omap_clkctrl_data omap5_clkctrl_data[];
extern const struct omap_clkctrl_data dra7_clkctrl_data[];
-extern const struct omap_clkctrl_data am3_clkctrl_data[];
+extern const struct omap_clkctrl_data am3_clkctrl_compat_data[];
+extern struct ti_dt_clk am33xx_compat_clks[];
extern const struct omap_clkctrl_data am4_clkctrl_data[];
extern const struct omap_clkctrl_data am438x_clkctrl_data[];
extern const struct omap_clkctrl_data dm814_clkctrl_data[];
--
1.9.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 07/11] clk: ti: am33xx: add new clkctrl data for am33xx
2018-08-31 15:06 [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries Tero Kristo
` (5 preceding siblings ...)
2018-08-31 15:07 ` [PATCH 06/11] clk: ti: am33xx: rename existing clkctrl data as compat data Tero Kristo
@ 2018-08-31 15:07 ` Tero Kristo
2018-08-31 15:07 ` [PATCH 08/11] clk: ti: am43xx: rename existing clkctrl data as compat data Tero Kristo
` (4 subsequent siblings)
11 siblings, 0 replies; 27+ messages in thread
From: Tero Kristo @ 2018-08-31 15:07 UTC (permalink / raw)
To: linux-clk, sboyd, mturquette; +Cc: linux-omap, tony
The new clkctrl data layout for am33xx is split based on clockdomain
boundaries. Previously the split was based on CM boundaries. This patch
adds the new data as separate data entity, retaining the compatibility
data also for now. The compatibility data can be removed once no longer
needed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
drivers/clk/ti/clk-33xx.c | 244 +++++++++++++++++++++++++++++++++++++++++++++-
drivers/clk/ti/clkctrl.c | 8 +-
drivers/clk/ti/clock.h | 1 +
3 files changed, 250 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
index b43c003..a360d31 100644
--- a/drivers/clk/ti/clk-33xx.c
+++ b/drivers/clk/ti/clk-33xx.c
@@ -23,6 +23,245 @@
#include "clock.h"
+static const char * const am3_gpio1_dbclk_parents[] __initconst = {
+ "clk-24mhz-clkctrl:0000:0",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data am3_gpio2_bit_data[] __initconst = {
+ { 18, TI_CLK_GATE, am3_gpio1_dbclk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data am3_gpio3_bit_data[] __initconst = {
+ { 18, TI_CLK_GATE, am3_gpio1_dbclk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data am3_gpio4_bit_data[] __initconst = {
+ { 18, TI_CLK_GATE, am3_gpio1_dbclk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l4ls_clkctrl_regs[] __initconst = {
+ { AM3_L4LS_UART6_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM3_L4LS_MMC1_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
+ { AM3_L4LS_ELM_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM3_L4LS_I2C3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM3_L4LS_I2C2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM3_L4LS_SPI0_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM3_L4LS_SPI1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM3_L4LS_L4_LS_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM3_L4LS_UART2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM3_L4LS_UART3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM3_L4LS_UART4_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM3_L4LS_UART5_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM3_L4LS_TIMER7_CLKCTRL, NULL, CLKF_SW_SUP, "timer7_fck" },
+ { AM3_L4LS_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "timer2_fck" },
+ { AM3_L4LS_TIMER3_CLKCTRL, NULL, CLKF_SW_SUP, "timer3_fck" },
+ { AM3_L4LS_TIMER4_CLKCTRL, NULL, CLKF_SW_SUP, "timer4_fck" },
+ { AM3_L4LS_RNG_CLKCTRL, NULL, CLKF_SW_SUP, "rng_fck" },
+ { AM3_L4LS_GPIO2_CLKCTRL, am3_gpio2_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM3_L4LS_GPIO3_CLKCTRL, am3_gpio3_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM3_L4LS_GPIO4_CLKCTRL, am3_gpio4_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM3_L4LS_D_CAN0_CLKCTRL, NULL, CLKF_SW_SUP, "dcan0_fck" },
+ { AM3_L4LS_D_CAN1_CLKCTRL, NULL, CLKF_SW_SUP, "dcan1_fck" },
+ { AM3_L4LS_EPWMSS1_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM3_L4LS_EPWMSS0_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM3_L4LS_EPWMSS2_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM3_L4LS_TIMER5_CLKCTRL, NULL, CLKF_SW_SUP, "timer5_fck" },
+ { AM3_L4LS_TIMER6_CLKCTRL, NULL, CLKF_SW_SUP, "timer6_fck" },
+ { AM3_L4LS_MMC2_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
+ { AM3_L4LS_SPINLOCK_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM3_L4LS_MAILBOX_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM3_L4LS_OCPWP_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l3s_clkctrl_regs[] __initconst = {
+ { AM3_L3S_USB_OTG_HS_CLKCTRL, NULL, CLKF_SW_SUP, "usbotg_fck" },
+ { AM3_L3S_GPMC_CLKCTRL, NULL, CLKF_SW_SUP, "l3s_gclk" },
+ { AM3_L3S_MCASP0_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp0_fck" },
+ { AM3_L3S_MCASP1_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp1_fck" },
+ { AM3_L3S_MMC3_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l3_clkctrl_regs[] __initconst = {
+ { AM3_L3_TPTC0_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM3_L3_EMIF_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_ddr_m2_div2_ck" },
+ { AM3_L3_OCMCRAM_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM3_L3_AES_CLKCTRL, NULL, CLKF_SW_SUP, "aes0_fck" },
+ { AM3_L3_SHAM_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM3_L3_TPCC_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM3_L3_L3_INSTR_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM3_L3_L3_MAIN_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM3_L3_TPTC1_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM3_L3_TPTC2_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l4hs_clkctrl_regs[] __initconst = {
+ { AM3_L4HS_L4_HS_CLKCTRL, NULL, CLKF_SW_SUP, "l4hs_gclk" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_pruss_ocp_clkctrl_regs[] __initconst = {
+ { AM3_PRUSS_OCP_PRUSS_CLKCTRL, NULL, CLKF_SW_SUP, "pruss_ocp_gclk" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_cpsw_125mhz_clkctrl_regs[] __initconst = {
+ { AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL, NULL, CLKF_SW_SUP, "cpsw_125mhz_gclk" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_lcdc_clkctrl_regs[] __initconst = {
+ { AM3_LCDC_LCDC_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_SET_RATE_PARENT, "lcd_gclk" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_clk_24mhz_clkctrl_regs[] __initconst = {
+ { AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL, NULL, CLKF_SW_SUP, "clkdiv32k_ck" },
+ { 0 },
+};
+
+static const char * const am3_gpio0_dbclk_parents[] __initconst = {
+ "gpio0_dbclk_mux_ck",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data am3_gpio1_bit_data[] __initconst = {
+ { 18, TI_CLK_GATE, am3_gpio0_dbclk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l4_wkup_clkctrl_regs[] __initconst = {
+ { AM3_L4_WKUP_CONTROL_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_core_m4_div2_ck" },
+ { AM3_L4_WKUP_GPIO1_CLKCTRL, am3_gpio1_bit_data, CLKF_SW_SUP, "dpll_core_m4_div2_ck" },
+ { AM3_L4_WKUP_L4_WKUP_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_core_m4_div2_ck" },
+ { AM3_L4_WKUP_UART1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_wkupdm_ck" },
+ { AM3_L4_WKUP_I2C1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_wkupdm_ck" },
+ { AM3_L4_WKUP_ADC_TSC_CLKCTRL, NULL, CLKF_SW_SUP, "adc_tsc_fck" },
+ { AM3_L4_WKUP_SMARTREFLEX0_CLKCTRL, NULL, CLKF_SW_SUP, "smartreflex0_fck" },
+ { AM3_L4_WKUP_TIMER1_CLKCTRL, NULL, CLKF_SW_SUP, "timer1_fck" },
+ { AM3_L4_WKUP_SMARTREFLEX1_CLKCTRL, NULL, CLKF_SW_SUP, "smartreflex1_fck" },
+ { AM3_L4_WKUP_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "wdt1_fck" },
+ { 0 },
+};
+
+static const char * const am3_dbg_sysclk_ck_parents[] __initconst = {
+ "sys_clkin_ck",
+ NULL,
+};
+
+static const char * const am3_trace_pmd_clk_mux_ck_parents[] __initconst = {
+ "l3-aon-clkctrl:0000:19",
+ "l3-aon-clkctrl:0000:30",
+ NULL,
+};
+
+static const char * const am3_trace_clk_div_ck_parents[] __initconst = {
+ "l3-aon-clkctrl:0000:20",
+ NULL,
+};
+
+static const struct omap_clkctrl_div_data am3_trace_clk_div_ck_data __initconst = {
+ .max_div = 64,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+};
+
+static const char * const am3_stm_clk_div_ck_parents[] __initconst = {
+ "l3-aon-clkctrl:0000:22",
+ NULL,
+};
+
+static const struct omap_clkctrl_div_data am3_stm_clk_div_ck_data __initconst = {
+ .max_div = 64,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+};
+
+static const char * const am3_dbg_clka_ck_parents[] __initconst = {
+ "dpll_core_m4_ck",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data am3_debugss_bit_data[] __initconst = {
+ { 19, TI_CLK_GATE, am3_dbg_sysclk_ck_parents, NULL },
+ { 20, TI_CLK_MUX, am3_trace_pmd_clk_mux_ck_parents, NULL },
+ { 22, TI_CLK_MUX, am3_trace_pmd_clk_mux_ck_parents, NULL },
+ { 24, TI_CLK_DIVIDER, am3_trace_clk_div_ck_parents, &am3_trace_clk_div_ck_data },
+ { 27, TI_CLK_DIVIDER, am3_stm_clk_div_ck_parents, &am3_stm_clk_div_ck_data },
+ { 30, TI_CLK_GATE, am3_dbg_clka_ck_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l3_aon_clkctrl_regs[] __initconst = {
+ { AM3_L3_AON_DEBUGSS_CLKCTRL, am3_debugss_bit_data, CLKF_SW_SUP, "l3-aon-clkctrl:0000:24" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l4_wkup_aon_clkctrl_regs[] __initconst = {
+ { AM3_L4_WKUP_AON_WKUP_M3_CLKCTRL, NULL, CLKF_NO_IDLEST, "dpll_core_m4_div2_ck" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_mpu_clkctrl_regs[] __initconst = {
+ { AM3_MPU_MPU_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_mpu_m2_ck" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l4_rtc_clkctrl_regs[] __initconst = {
+ { AM3_L4_RTC_RTC_CLKCTRL, NULL, CLKF_SW_SUP, "clk_32768_ck" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_gfx_l3_clkctrl_regs[] __initconst = {
+ { AM3_GFX_L3_GFX_CLKCTRL, NULL, CLKF_SW_SUP, "gfx_fck_div_ck" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l4_cefuse_clkctrl_regs[] __initconst = {
+ { AM3_L4_CEFUSE_CEFUSE_CLKCTRL, NULL, CLKF_SW_SUP, "sys_clkin_ck" },
+ { 0 },
+};
+
+const struct omap_clkctrl_data am3_clkctrl_data[] __initconst = {
+ { 0x44e00038, am3_l4ls_clkctrl_regs },
+ { 0x44e0001c, am3_l3s_clkctrl_regs },
+ { 0x44e00024, am3_l3_clkctrl_regs },
+ { 0x44e00120, am3_l4hs_clkctrl_regs },
+ { 0x44e000e8, am3_pruss_ocp_clkctrl_regs },
+ { 0x44e00000, am3_cpsw_125mhz_clkctrl_regs },
+ { 0x44e00018, am3_lcdc_clkctrl_regs },
+ { 0x44e0014c, am3_clk_24mhz_clkctrl_regs },
+ { 0x44e00400, am3_l4_wkup_clkctrl_regs },
+ { 0x44e00414, am3_l3_aon_clkctrl_regs },
+ { 0x44e004b0, am3_l4_wkup_aon_clkctrl_regs },
+ { 0x44e00600, am3_mpu_clkctrl_regs },
+ { 0x44e00800, am3_l4_rtc_clkctrl_regs },
+ { 0x44e00900, am3_gfx_l3_clkctrl_regs },
+ { 0x44e00a00, am3_l4_cefuse_clkctrl_regs },
+ { 0 },
+};
+
+static struct ti_dt_clk am33xx_clks[] = {
+ DT_CLK(NULL, "timer_32k_ck", "clk-24mhz-clkctrl:0000:0"),
+ DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK(NULL, "clkdiv32k_ick", "clk-24mhz-clkctrl:0000:0"),
+ DT_CLK(NULL, "dbg_clka_ck", "l3-aon-clkctrl:0000:30"),
+ DT_CLK(NULL, "dbg_sysclk_ck", "l3-aon-clkctrl:0000:19"),
+ DT_CLK(NULL, "gpio0_dbclk", "l4-wkup-clkctrl:0008:18"),
+ DT_CLK(NULL, "gpio1_dbclk", "l4ls-clkctrl:0074:18"),
+ DT_CLK(NULL, "gpio2_dbclk", "l4ls-clkctrl:0078:18"),
+ DT_CLK(NULL, "gpio3_dbclk", "l4ls-clkctrl:007c:18"),
+ DT_CLK(NULL, "stm_clk_div_ck", "l3-aon-clkctrl:0000:27"),
+ DT_CLK(NULL, "stm_pmd_clock_mux_ck", "l3-aon-clkctrl:0000:22"),
+ DT_CLK(NULL, "trace_clk_div_ck", "l3-aon-clkctrl:0000:24"),
+ DT_CLK(NULL, "trace_pmd_clk_mux_ck", "l3-aon-clkctrl:0000:20"),
+ { .node_name = NULL },
+};
+
static const char *enable_init_clks[] = {
"dpll_ddr_m2_ck",
"dpll_mpu_m2_ck",
@@ -38,7 +277,10 @@ int __init am33xx_dt_clk_init(void)
{
struct clk *clk1, *clk2;
- ti_dt_clocks_register(am33xx_compat_clks);
+ if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
+ ti_dt_clocks_register(am33xx_compat_clks);
+ else
+ ti_dt_clocks_register(am33xx_clks);
omap2_clk_disable_autoidle_all();
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 00199fe..89906b6 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -467,8 +467,12 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
data = dra7_clkctrl_data;
#endif
#ifdef CONFIG_SOC_AM33XX
- if (of_machine_is_compatible("ti,am33xx"))
- data = am3_clkctrl_compat_data;
+ if (of_machine_is_compatible("ti,am33xx")) {
+ if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
+ data = am3_clkctrl_compat_data;
+ else
+ data = am3_clkctrl_data;
+ }
#endif
#ifdef CONFIG_SOC_AM43XX
if (of_machine_is_compatible("ti,am4372"))
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index b614f76..c4c6c78 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -184,6 +184,7 @@ struct omap_clkctrl_data {
extern const struct omap_clkctrl_data omap4_clkctrl_data[];
extern const struct omap_clkctrl_data omap5_clkctrl_data[];
extern const struct omap_clkctrl_data dra7_clkctrl_data[];
+extern const struct omap_clkctrl_data am3_clkctrl_data[];
extern const struct omap_clkctrl_data am3_clkctrl_compat_data[];
extern struct ti_dt_clk am33xx_compat_clks[];
extern const struct omap_clkctrl_data am4_clkctrl_data[];
--
1.9.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 08/11] clk: ti: am43xx: rename existing clkctrl data as compat data
2018-08-31 15:06 [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries Tero Kristo
` (6 preceding siblings ...)
2018-08-31 15:07 ` [PATCH 07/11] clk: ti: am33xx: add new clkctrl data for am33xx Tero Kristo
@ 2018-08-31 15:07 ` Tero Kristo
2018-08-31 15:07 ` [PATCH 09/11] clk: ti: am43xx: add new clkctrl data for am43xx Tero Kristo
` (3 subsequent siblings)
11 siblings, 0 replies; 27+ messages in thread
From: Tero Kristo @ 2018-08-31 15:07 UTC (permalink / raw)
To: linux-clk, sboyd, mturquette; +Cc: linux-omap, tony
Rename the existing clkctrl data in preparation of upcoming clkdm
based split for it. Once the DT data has transitioned also, the
compat data can be removed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
drivers/clk/ti/Makefile | 3 +-
drivers/clk/ti/{clk-43xx.c => clk-43xx-compat.c} | 33 +---
drivers/clk/ti/clk-43xx.c | 203 +----------------------
drivers/clk/ti/clkctrl.c | 4 +-
drivers/clk/ti/clock.h | 5 +-
5 files changed, 11 insertions(+), 237 deletions(-)
copy drivers/clk/ti/{clk-43xx.c => clk-43xx-compat.c} (90%)
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 0ff5a253..5f2385d 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -18,7 +18,8 @@ obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o \
dpll3xxx.o dpll44xx.o
obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o \
clk-dra7-atl.o dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM43XX) += $(clk-common) dpll3xxx.o clk-43xx.o
+obj-$(CONFIG_SOC_AM43XX) += $(clk-common) dpll3xxx.o clk-43xx.o \
+ clk-43xx-compat.o
endif # CONFIG_ARCH_OMAP2PLUS
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx-compat.c
similarity index 90%
copy from drivers/clk/ti/clk-43xx.c
copy to drivers/clk/ti/clk-43xx-compat.c
index 63c5ddb..5130398 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx-compat.c
@@ -192,7 +192,7 @@
{ 0 },
};
-const struct omap_clkctrl_data am4_clkctrl_data[] __initconst = {
+const struct omap_clkctrl_data am4_clkctrl_compat_data[] __initconst = {
{ 0x44df2820, am4_l4_wkup_clkctrl_regs },
{ 0x44df8320, am4_mpu_clkctrl_regs },
{ 0x44df8420, am4_gfx_l3_clkctrl_regs },
@@ -201,7 +201,7 @@
{ 0 },
};
-const struct omap_clkctrl_data am438x_clkctrl_data[] __initconst = {
+const struct omap_clkctrl_data am438x_clkctrl_compat_data[] __initconst = {
{ 0x44df2820, am4_l4_wkup_clkctrl_regs },
{ 0x44df8320, am4_mpu_clkctrl_regs },
{ 0x44df8420, am4_gfx_l3_clkctrl_regs },
@@ -209,7 +209,7 @@
{ 0 },
};
-static struct ti_dt_clk am43xx_clks[] = {
+struct ti_dt_clk am43xx_compat_clks[] = {
DT_CLK(NULL, "timer_32k_ck", "clkdiv32k_ick"),
DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
DT_CLK(NULL, "gpio0_dbclk", "l4_wkup_cm:0348:8"),
@@ -223,30 +223,3 @@
DT_CLK(NULL, "usb_otg_ss1_refclk960m", "l4_per_cm:0248:8"),
{ .node_name = NULL },
};
-
-int __init am43xx_dt_clk_init(void)
-{
- struct clk *clk1, *clk2;
-
- ti_dt_clocks_register(am43xx_clks);
-
- omap2_clk_disable_autoidle_all();
-
- ti_clk_add_aliases();
-
- /*
- * cpsw_cpts_rft_clk has got the choice of 3 clocksources
- * dpll_core_m4_ck, dpll_core_m5_ck and dpll_disp_m2_ck.
- * By default dpll_core_m4_ck is selected, witn this as clock
- * source the CPTS doesnot work properly. It gives clockcheck errors
- * while running PTP.
- * clockcheck: clock jumped backward or running slower than expected!
- * By selecting dpll_core_m5_ck as the clocksource fixes this issue.
- * In AM335x dpll_core_m5_ck is the default clocksource.
- */
- clk1 = clk_get_sys(NULL, "cpsw_cpts_rft_clk");
- clk2 = clk_get_sys(NULL, "dpll_core_m5_ck");
- clk_set_parent(clk1, clk2);
-
- return 0;
-}
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
index 63c5ddb..dc3ccdc 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx.c
@@ -23,212 +23,11 @@
#include "clock.h"
-static const char * const am4_synctimer_32kclk_parents[] __initconst = {
- "mux_synctimer32k_ck",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data am4_counter_32k_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, am4_synctimer_32kclk_parents, NULL },
- { 0 },
-};
-
-static const char * const am4_gpio0_dbclk_parents[] __initconst = {
- "gpio0_dbclk_mux_ck",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data am4_gpio1_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, am4_gpio0_dbclk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data am4_l4_wkup_clkctrl_regs[] __initconst = {
- { AM4_ADC_TSC_CLKCTRL, NULL, CLKF_SW_SUP, "adc_tsc_fck", "l3s_tsc_clkdm" },
- { AM4_L4_WKUP_CLKCTRL, NULL, CLKF_SW_SUP, "sys_clkin_ck", "l4_wkup_clkdm" },
- { AM4_WKUP_M3_CLKCTRL, NULL, CLKF_NO_IDLEST, "sys_clkin_ck" },
- { AM4_COUNTER_32K_CLKCTRL, am4_counter_32k_bit_data, CLKF_SW_SUP, "l4_wkup_cm:clk:0210:8" },
- { AM4_TIMER1_CLKCTRL, NULL, CLKF_SW_SUP, "timer1_fck", "l4_wkup_clkdm" },
- { AM4_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "wdt1_fck", "l4_wkup_clkdm" },
- { AM4_I2C1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_wkupdm_ck", "l4_wkup_clkdm" },
- { AM4_UART1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_wkupdm_ck", "l4_wkup_clkdm" },
- { AM4_SMARTREFLEX0_CLKCTRL, NULL, CLKF_SW_SUP, "smartreflex0_fck", "l4_wkup_clkdm" },
- { AM4_SMARTREFLEX1_CLKCTRL, NULL, CLKF_SW_SUP, "smartreflex1_fck", "l4_wkup_clkdm" },
- { AM4_CONTROL_CLKCTRL, NULL, CLKF_SW_SUP, "sys_clkin_ck", "l4_wkup_clkdm" },
- { AM4_GPIO1_CLKCTRL, am4_gpio1_bit_data, CLKF_SW_SUP, "sys_clkin_ck", "l4_wkup_clkdm" },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data am4_mpu_clkctrl_regs[] __initconst = {
- { AM4_MPU_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_mpu_m2_ck" },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data am4_gfx_l3_clkctrl_regs[] __initconst = {
- { AM4_GFX_CLKCTRL, NULL, CLKF_SW_SUP, "gfx_fck_div_ck" },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data am4_l4_rtc_clkctrl_regs[] __initconst = {
- { AM4_RTC_CLKCTRL, NULL, CLKF_SW_SUP, "clk_32768_ck" },
- { 0 },
-};
-
-static const char * const am4_usb_otg_ss0_refclk960m_parents[] __initconst = {
- "dpll_per_clkdcoldo",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data am4_usb_otg_ss0_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, am4_usb_otg_ss0_refclk960m_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data am4_usb_otg_ss1_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, am4_usb_otg_ss0_refclk960m_parents, NULL },
- { 0 },
-};
-
-static const char * const am4_gpio1_dbclk_parents[] __initconst = {
- "clkdiv32k_ick",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data am4_gpio2_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, am4_gpio1_dbclk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data am4_gpio3_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, am4_gpio1_dbclk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data am4_gpio4_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, am4_gpio1_dbclk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data am4_gpio5_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, am4_gpio1_dbclk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data am4_gpio6_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, am4_gpio1_dbclk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data am4_l4_per_clkctrl_regs[] __initconst = {
- { AM4_L3_MAIN_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM4_AES_CLKCTRL, NULL, CLKF_SW_SUP, "aes0_fck", "l3_clkdm" },
- { AM4_DES_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM4_L3_INSTR_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM4_OCMCRAM_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM4_SHAM_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM4_VPFE0_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3s_clkdm" },
- { AM4_VPFE1_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3s_clkdm" },
- { AM4_TPCC_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM4_TPTC0_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM4_TPTC1_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM4_TPTC2_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
- { AM4_L4_HS_CLKCTRL, NULL, CLKF_SW_SUP, "l4hs_gclk", "l3_clkdm" },
- { AM4_GPMC_CLKCTRL, NULL, CLKF_SW_SUP, "l3s_gclk", "l3s_clkdm" },
- { AM4_MCASP0_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp0_fck", "l3s_clkdm" },
- { AM4_MCASP1_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp1_fck", "l3s_clkdm" },
- { AM4_MMC3_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk", "l3s_clkdm" },
- { AM4_QSPI_CLKCTRL, NULL, CLKF_SW_SUP, "l3s_gclk", "l3s_clkdm" },
- { AM4_USB_OTG_SS0_CLKCTRL, am4_usb_otg_ss0_bit_data, CLKF_SW_SUP, "l3s_gclk", "l3s_clkdm" },
- { AM4_USB_OTG_SS1_CLKCTRL, am4_usb_otg_ss1_bit_data, CLKF_SW_SUP, "l3s_gclk", "l3s_clkdm" },
- { AM4_PRUSS_CLKCTRL, NULL, CLKF_SW_SUP, "pruss_ocp_gclk", "pruss_ocp_clkdm" },
- { AM4_L4_LS_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_D_CAN0_CLKCTRL, NULL, CLKF_SW_SUP, "dcan0_fck" },
- { AM4_D_CAN1_CLKCTRL, NULL, CLKF_SW_SUP, "dcan1_fck" },
- { AM4_EPWMSS0_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_EPWMSS1_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_EPWMSS2_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_EPWMSS3_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_EPWMSS4_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_EPWMSS5_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_ELM_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_GPIO2_CLKCTRL, am4_gpio2_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_GPIO3_CLKCTRL, am4_gpio3_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_GPIO4_CLKCTRL, am4_gpio4_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_GPIO5_CLKCTRL, am4_gpio5_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_GPIO6_CLKCTRL, am4_gpio6_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_HDQ1W_CLKCTRL, NULL, CLKF_SW_SUP, "func_12m_clk" },
- { AM4_I2C2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM4_I2C3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM4_MAILBOX_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_MMC1_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
- { AM4_MMC2_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
- { AM4_RNG_CLKCTRL, NULL, CLKF_SW_SUP, "rng_fck" },
- { AM4_SPI0_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM4_SPI1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM4_SPI2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM4_SPI3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM4_SPI4_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM4_SPINLOCK_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "timer2_fck" },
- { AM4_TIMER3_CLKCTRL, NULL, CLKF_SW_SUP, "timer3_fck" },
- { AM4_TIMER4_CLKCTRL, NULL, CLKF_SW_SUP, "timer4_fck" },
- { AM4_TIMER5_CLKCTRL, NULL, CLKF_SW_SUP, "timer5_fck" },
- { AM4_TIMER6_CLKCTRL, NULL, CLKF_SW_SUP, "timer6_fck" },
- { AM4_TIMER7_CLKCTRL, NULL, CLKF_SW_SUP, "timer7_fck" },
- { AM4_TIMER8_CLKCTRL, NULL, CLKF_SW_SUP, "timer8_fck" },
- { AM4_TIMER9_CLKCTRL, NULL, CLKF_SW_SUP, "timer9_fck" },
- { AM4_TIMER10_CLKCTRL, NULL, CLKF_SW_SUP, "timer10_fck" },
- { AM4_TIMER11_CLKCTRL, NULL, CLKF_SW_SUP, "timer11_fck" },
- { AM4_UART2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM4_UART3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM4_UART4_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM4_UART5_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM4_UART6_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
- { AM4_OCP2SCP0_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_OCP2SCP1_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
- { AM4_EMIF_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_ddr_m2_ck", "emif_clkdm" },
- { AM4_DSS_CORE_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_SET_RATE_PARENT, "disp_clk", "dss_clkdm" },
- { AM4_CPGMAC0_CLKCTRL, NULL, CLKF_SW_SUP, "cpsw_125mhz_gclk", "cpsw_125mhz_clkdm" },
- { 0 },
-};
-
-const struct omap_clkctrl_data am4_clkctrl_data[] __initconst = {
- { 0x44df2820, am4_l4_wkup_clkctrl_regs },
- { 0x44df8320, am4_mpu_clkctrl_regs },
- { 0x44df8420, am4_gfx_l3_clkctrl_regs },
- { 0x44df8520, am4_l4_rtc_clkctrl_regs },
- { 0x44df8820, am4_l4_per_clkctrl_regs },
- { 0 },
-};
-
-const struct omap_clkctrl_data am438x_clkctrl_data[] __initconst = {
- { 0x44df2820, am4_l4_wkup_clkctrl_regs },
- { 0x44df8320, am4_mpu_clkctrl_regs },
- { 0x44df8420, am4_gfx_l3_clkctrl_regs },
- { 0x44df8820, am4_l4_per_clkctrl_regs },
- { 0 },
-};
-
-static struct ti_dt_clk am43xx_clks[] = {
- DT_CLK(NULL, "timer_32k_ck", "clkdiv32k_ick"),
- DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
- DT_CLK(NULL, "gpio0_dbclk", "l4_wkup_cm:0348:8"),
- DT_CLK(NULL, "gpio1_dbclk", "l4_per_cm:0458:8"),
- DT_CLK(NULL, "gpio2_dbclk", "l4_per_cm:0460:8"),
- DT_CLK(NULL, "gpio3_dbclk", "l4_per_cm:0468:8"),
- DT_CLK(NULL, "gpio4_dbclk", "l4_per_cm:0470:8"),
- DT_CLK(NULL, "gpio5_dbclk", "l4_per_cm:0478:8"),
- DT_CLK(NULL, "synctimer_32kclk", "l4_wkup_cm:0210:8"),
- DT_CLK(NULL, "usb_otg_ss0_refclk960m", "l4_per_cm:0240:8"),
- DT_CLK(NULL, "usb_otg_ss1_refclk960m", "l4_per_cm:0248:8"),
- { .node_name = NULL },
-};
-
int __init am43xx_dt_clk_init(void)
{
struct clk *clk1, *clk2;
- ti_dt_clocks_register(am43xx_clks);
+ ti_dt_clocks_register(am43xx_compat_clks);
omap2_clk_disable_autoidle_all();
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 89906b6..e3423ca 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -476,9 +476,9 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
#endif
#ifdef CONFIG_SOC_AM43XX
if (of_machine_is_compatible("ti,am4372"))
- data = am4_clkctrl_data;
+ data = am4_clkctrl_compat_data;
if (of_machine_is_compatible("ti,am438x"))
- data = am438x_clkctrl_data;
+ data = am438x_clkctrl_compat_data;
#endif
#ifdef CONFIG_SOC_TI81XX
if (of_machine_is_compatible("ti,dm814"))
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index c4c6c78..01b3c4e 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -187,8 +187,9 @@ struct omap_clkctrl_data {
extern const struct omap_clkctrl_data am3_clkctrl_data[];
extern const struct omap_clkctrl_data am3_clkctrl_compat_data[];
extern struct ti_dt_clk am33xx_compat_clks[];
-extern const struct omap_clkctrl_data am4_clkctrl_data[];
-extern const struct omap_clkctrl_data am438x_clkctrl_data[];
+extern const struct omap_clkctrl_data am4_clkctrl_compat_data[];
+extern struct ti_dt_clk am43xx_compat_clks[];
+extern const struct omap_clkctrl_data am438x_clkctrl_compat_data[];
extern const struct omap_clkctrl_data dm814_clkctrl_data[];
extern const struct omap_clkctrl_data dm816_clkctrl_data[];
--
1.9.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 09/11] clk: ti: am43xx: add new clkctrl data for am43xx
2018-08-31 15:06 [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries Tero Kristo
` (7 preceding siblings ...)
2018-08-31 15:07 ` [PATCH 08/11] clk: ti: am43xx: rename existing clkctrl data as compat data Tero Kristo
@ 2018-08-31 15:07 ` Tero Kristo
2018-08-31 15:07 ` [PATCH 10/11] clk: ti: dra7xx: rename existing clkctrl data as compat data Tero Kristo
` (2 subsequent siblings)
11 siblings, 0 replies; 27+ messages in thread
From: Tero Kristo @ 2018-08-31 15:07 UTC (permalink / raw)
To: linux-clk, sboyd, mturquette; +Cc: linux-omap, tony
The new clkctrl data layout for am43xx is split based on clockdomain
boundaries. Previously the split was based on CM boundaries. This patch
adds the new data as separate data entity, retaining the compatibility
data also for now. The compatibility data can be removed once no longer
needed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
drivers/clk/ti/clk-43xx.c | 254 +++++++++++++++++++++++++++++++++++++++++++++-
drivers/clk/ti/clkctrl.c | 17 +++-
drivers/clk/ti/clock.h | 2 +
3 files changed, 268 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
index dc3ccdc..2782d91 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx.c
@@ -23,11 +23,263 @@
#include "clock.h"
+static const struct omap_clkctrl_reg_data am4_l3s_tsc_clkctrl_regs[] __initconst = {
+ { AM4_L3S_TSC_ADC_TSC_CLKCTRL, NULL, CLKF_SW_SUP, "adc_tsc_fck" },
+ { 0 },
+};
+
+static const char * const am4_synctimer_32kclk_parents[] __initconst = {
+ "mux_synctimer32k_ck",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data am4_counter_32k_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, am4_synctimer_32kclk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am4_l4_wkup_aon_clkctrl_regs[] __initconst = {
+ { AM4_L4_WKUP_AON_WKUP_M3_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_NO_IDLEST, "sys_clkin_ck" },
+ { AM4_L4_WKUP_AON_COUNTER_32K_CLKCTRL, am4_counter_32k_bit_data, CLKF_SW_SUP, "l4-wkup-aon-clkctrl:0008:8" },
+ { 0 },
+};
+
+static const char * const am4_gpio0_dbclk_parents[] __initconst = {
+ "gpio0_dbclk_mux_ck",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data am4_gpio1_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, am4_gpio0_dbclk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am4_l4_wkup_clkctrl_regs[] __initconst = {
+ { AM4_L4_WKUP_L4_WKUP_CLKCTRL, NULL, CLKF_SW_SUP, "sys_clkin_ck" },
+ { AM4_L4_WKUP_TIMER1_CLKCTRL, NULL, CLKF_SW_SUP, "timer1_fck" },
+ { AM4_L4_WKUP_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "wdt1_fck" },
+ { AM4_L4_WKUP_I2C1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_wkupdm_ck" },
+ { AM4_L4_WKUP_UART1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_wkupdm_ck" },
+ { AM4_L4_WKUP_SMARTREFLEX0_CLKCTRL, NULL, CLKF_SW_SUP, "smartreflex0_fck" },
+ { AM4_L4_WKUP_SMARTREFLEX1_CLKCTRL, NULL, CLKF_SW_SUP, "smartreflex1_fck" },
+ { AM4_L4_WKUP_CONTROL_CLKCTRL, NULL, CLKF_SW_SUP, "sys_clkin_ck" },
+ { AM4_L4_WKUP_GPIO1_CLKCTRL, am4_gpio1_bit_data, CLKF_SW_SUP, "sys_clkin_ck" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am4_mpu_clkctrl_regs[] __initconst = {
+ { AM4_MPU_MPU_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_mpu_m2_ck" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am4_gfx_l3_clkctrl_regs[] __initconst = {
+ { AM4_GFX_L3_GFX_CLKCTRL, NULL, CLKF_SW_SUP, "gfx_fck_div_ck" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am4_l4_rtc_clkctrl_regs[] __initconst = {
+ { AM4_L4_RTC_RTC_CLKCTRL, NULL, CLKF_SW_SUP, "clk_32768_ck" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am4_l3_clkctrl_regs[] __initconst = {
+ { AM4_L3_L3_MAIN_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM4_L3_AES_CLKCTRL, NULL, CLKF_SW_SUP, "aes0_fck" },
+ { AM4_L3_DES_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM4_L3_L3_INSTR_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM4_L3_OCMCRAM_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM4_L3_SHAM_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM4_L3_TPCC_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM4_L3_TPTC0_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM4_L3_TPTC1_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM4_L3_TPTC2_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM4_L3_L4_HS_CLKCTRL, NULL, CLKF_SW_SUP, "l4hs_gclk" },
+ { 0 },
+};
+
+static const char * const am4_usb_otg_ss0_refclk960m_parents[] __initconst = {
+ "dpll_per_clkdcoldo",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data am4_usb_otg_ss0_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, am4_usb_otg_ss0_refclk960m_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data am4_usb_otg_ss1_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, am4_usb_otg_ss0_refclk960m_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am4_l3s_clkctrl_regs[] __initconst = {
+ { AM4_L3S_VPFE0_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM4_L3S_VPFE1_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+ { AM4_L3S_GPMC_CLKCTRL, NULL, CLKF_SW_SUP, "l3s_gclk" },
+ { AM4_L3S_MCASP0_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp0_fck" },
+ { AM4_L3S_MCASP1_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp1_fck" },
+ { AM4_L3S_MMC3_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
+ { AM4_L3S_QSPI_CLKCTRL, NULL, CLKF_SW_SUP, "l3s_gclk" },
+ { AM4_L3S_USB_OTG_SS0_CLKCTRL, am4_usb_otg_ss0_bit_data, CLKF_SW_SUP, "l3s_gclk" },
+ { AM4_L3S_USB_OTG_SS1_CLKCTRL, am4_usb_otg_ss1_bit_data, CLKF_SW_SUP, "l3s_gclk" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am4_pruss_ocp_clkctrl_regs[] __initconst = {
+ { AM4_PRUSS_OCP_PRUSS_CLKCTRL, NULL, CLKF_SW_SUP, "pruss_ocp_gclk" },
+ { 0 },
+};
+
+static const char * const am4_gpio1_dbclk_parents[] __initconst = {
+ "clkdiv32k_ick",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data am4_gpio2_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, am4_gpio1_dbclk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data am4_gpio3_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, am4_gpio1_dbclk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data am4_gpio4_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, am4_gpio1_dbclk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data am4_gpio5_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, am4_gpio1_dbclk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data am4_gpio6_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, am4_gpio1_dbclk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am4_l4ls_clkctrl_regs[] __initconst = {
+ { AM4_L4LS_L4_LS_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_D_CAN0_CLKCTRL, NULL, CLKF_SW_SUP, "dcan0_fck" },
+ { AM4_L4LS_D_CAN1_CLKCTRL, NULL, CLKF_SW_SUP, "dcan1_fck" },
+ { AM4_L4LS_EPWMSS0_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_EPWMSS1_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_EPWMSS2_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_EPWMSS3_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_EPWMSS4_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_EPWMSS5_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_ELM_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_GPIO2_CLKCTRL, am4_gpio2_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_GPIO3_CLKCTRL, am4_gpio3_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_GPIO4_CLKCTRL, am4_gpio4_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_GPIO5_CLKCTRL, am4_gpio5_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_GPIO6_CLKCTRL, am4_gpio6_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_HDQ1W_CLKCTRL, NULL, CLKF_SW_SUP, "func_12m_clk" },
+ { AM4_L4LS_I2C2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM4_L4LS_I2C3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM4_L4LS_MAILBOX_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_MMC1_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
+ { AM4_L4LS_MMC2_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
+ { AM4_L4LS_RNG_CLKCTRL, NULL, CLKF_SW_SUP, "rng_fck" },
+ { AM4_L4LS_SPI0_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM4_L4LS_SPI1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM4_L4LS_SPI2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM4_L4LS_SPI3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM4_L4LS_SPI4_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM4_L4LS_SPINLOCK_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "timer2_fck" },
+ { AM4_L4LS_TIMER3_CLKCTRL, NULL, CLKF_SW_SUP, "timer3_fck" },
+ { AM4_L4LS_TIMER4_CLKCTRL, NULL, CLKF_SW_SUP, "timer4_fck" },
+ { AM4_L4LS_TIMER5_CLKCTRL, NULL, CLKF_SW_SUP, "timer5_fck" },
+ { AM4_L4LS_TIMER6_CLKCTRL, NULL, CLKF_SW_SUP, "timer6_fck" },
+ { AM4_L4LS_TIMER7_CLKCTRL, NULL, CLKF_SW_SUP, "timer7_fck" },
+ { AM4_L4LS_TIMER8_CLKCTRL, NULL, CLKF_SW_SUP, "timer8_fck" },
+ { AM4_L4LS_TIMER9_CLKCTRL, NULL, CLKF_SW_SUP, "timer9_fck" },
+ { AM4_L4LS_TIMER10_CLKCTRL, NULL, CLKF_SW_SUP, "timer10_fck" },
+ { AM4_L4LS_TIMER11_CLKCTRL, NULL, CLKF_SW_SUP, "timer11_fck" },
+ { AM4_L4LS_UART2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM4_L4LS_UART3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM4_L4LS_UART4_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM4_L4LS_UART5_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM4_L4LS_UART6_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+ { AM4_L4LS_OCP2SCP0_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { AM4_L4LS_OCP2SCP1_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am4_emif_clkctrl_regs[] __initconst = {
+ { AM4_EMIF_EMIF_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_ddr_m2_ck" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am4_dss_clkctrl_regs[] __initconst = {
+ { AM4_DSS_DSS_CORE_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_SET_RATE_PARENT, "disp_clk" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data am4_cpsw_125mhz_clkctrl_regs[] __initconst = {
+ { AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL, NULL, CLKF_SW_SUP, "cpsw_125mhz_gclk" },
+ { 0 },
+};
+
+const struct omap_clkctrl_data am4_clkctrl_data[] __initconst = {
+ { 0x44df2920, am4_l3s_tsc_clkctrl_regs },
+ { 0x44df2a28, am4_l4_wkup_aon_clkctrl_regs },
+ { 0x44df2a20, am4_l4_wkup_clkctrl_regs },
+ { 0x44df8320, am4_mpu_clkctrl_regs },
+ { 0x44df8420, am4_gfx_l3_clkctrl_regs },
+ { 0x44df8520, am4_l4_rtc_clkctrl_regs },
+ { 0x44df8820, am4_l3_clkctrl_regs },
+ { 0x44df8868, am4_l3s_clkctrl_regs },
+ { 0x44df8b20, am4_pruss_ocp_clkctrl_regs },
+ { 0x44df8c20, am4_l4ls_clkctrl_regs },
+ { 0x44df8f20, am4_emif_clkctrl_regs },
+ { 0x44df9220, am4_dss_clkctrl_regs },
+ { 0x44df9320, am4_cpsw_125mhz_clkctrl_regs },
+ { 0 },
+};
+
+const struct omap_clkctrl_data am438x_clkctrl_data[] __initconst = {
+ { 0x44df2920, am4_l3s_tsc_clkctrl_regs },
+ { 0x44df2a28, am4_l4_wkup_aon_clkctrl_regs },
+ { 0x44df2a20, am4_l4_wkup_clkctrl_regs },
+ { 0x44df8320, am4_mpu_clkctrl_regs },
+ { 0x44df8420, am4_gfx_l3_clkctrl_regs },
+ { 0x44df8820, am4_l3_clkctrl_regs },
+ { 0x44df8868, am4_l3s_clkctrl_regs },
+ { 0x44df8b20, am4_pruss_ocp_clkctrl_regs },
+ { 0x44df8c20, am4_l4ls_clkctrl_regs },
+ { 0x44df8f20, am4_emif_clkctrl_regs },
+ { 0x44df9220, am4_dss_clkctrl_regs },
+ { 0x44df9320, am4_cpsw_125mhz_clkctrl_regs },
+ { 0 },
+};
+
+static struct ti_dt_clk am43xx_clks[] = {
+ DT_CLK(NULL, "timer_32k_ck", "clkdiv32k_ick"),
+ DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
+ DT_CLK(NULL, "gpio0_dbclk", "l4-wkup-clkctrl:0148:8"),
+ DT_CLK(NULL, "gpio1_dbclk", "l4ls-clkctrl:0058:8"),
+ DT_CLK(NULL, "gpio2_dbclk", "l4ls-clkctrl:0060:8"),
+ DT_CLK(NULL, "gpio3_dbclk", "l4ls-clkctrl:0068:8"),
+ DT_CLK(NULL, "gpio4_dbclk", "l4ls-clkctrl:0070:8"),
+ DT_CLK(NULL, "gpio5_dbclk", "l4ls-clkctrl:0078:8"),
+ DT_CLK(NULL, "synctimer_32kclk", "l4-wkup-aon-clkctrl:0008:8"),
+ DT_CLK(NULL, "usb_otg_ss0_refclk960m", "l3s-clkctrl:01f8:8"),
+ DT_CLK(NULL, "usb_otg_ss1_refclk960m", "l3s-clkctrl:0200:8"),
+ { .node_name = NULL },
+};
+
int __init am43xx_dt_clk_init(void)
{
struct clk *clk1, *clk2;
- ti_dt_clocks_register(am43xx_compat_clks);
+ if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
+ ti_dt_clocks_register(am43xx_compat_clks);
+ else
+ ti_dt_clocks_register(am43xx_clks);
omap2_clk_disable_autoidle_all();
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index e3423ca..f41542a 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -475,10 +475,19 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
}
#endif
#ifdef CONFIG_SOC_AM43XX
- if (of_machine_is_compatible("ti,am4372"))
- data = am4_clkctrl_compat_data;
- if (of_machine_is_compatible("ti,am438x"))
- data = am438x_clkctrl_compat_data;
+ if (of_machine_is_compatible("ti,am4372")) {
+ if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
+ data = am4_clkctrl_compat_data;
+ else
+ data = am4_clkctrl_data;
+ }
+
+ if (of_machine_is_compatible("ti,am438x")) {
+ if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
+ data = am438x_clkctrl_compat_data;
+ else
+ data = am438x_clkctrl_data;
+ }
#endif
#ifdef CONFIG_SOC_TI81XX
if (of_machine_is_compatible("ti,dm814"))
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 01b3c4e..11348de5 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -187,8 +187,10 @@ struct omap_clkctrl_data {
extern const struct omap_clkctrl_data am3_clkctrl_data[];
extern const struct omap_clkctrl_data am3_clkctrl_compat_data[];
extern struct ti_dt_clk am33xx_compat_clks[];
+extern const struct omap_clkctrl_data am4_clkctrl_data[];
extern const struct omap_clkctrl_data am4_clkctrl_compat_data[];
extern struct ti_dt_clk am43xx_compat_clks[];
+extern const struct omap_clkctrl_data am438x_clkctrl_data[];
extern const struct omap_clkctrl_data am438x_clkctrl_compat_data[];
extern const struct omap_clkctrl_data dm814_clkctrl_data[];
extern const struct omap_clkctrl_data dm816_clkctrl_data[];
--
1.9.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 10/11] clk: ti: dra7xx: rename existing clkctrl data as compat data
2018-08-31 15:06 [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries Tero Kristo
` (8 preceding siblings ...)
2018-08-31 15:07 ` [PATCH 09/11] clk: ti: am43xx: add new clkctrl data for am43xx Tero Kristo
@ 2018-08-31 15:07 ` Tero Kristo
2018-08-31 15:07 ` [PATCH 11/11] clk: ti: dra7: add new clkctrl data Tero Kristo
2018-09-04 15:36 ` [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries Tony Lindgren
11 siblings, 0 replies; 27+ messages in thread
From: Tero Kristo @ 2018-08-31 15:07 UTC (permalink / raw)
To: linux-clk, sboyd, mturquette; +Cc: linux-omap, tony
Rename the existing clkctrl data in preparation of upcoming clkdm
based split for it. Once the DT data has transitioned also, the
compat data can be removed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
drivers/clk/ti/Makefile | 3 +-
drivers/clk/ti/{clk-7xx.c => clk-7xx-compat.c} | 38 +-
drivers/clk/ti/clk-7xx.c | 802 +------------------------
drivers/clk/ti/clkctrl.c | 2 +-
drivers/clk/ti/clock.h | 3 +-
5 files changed, 8 insertions(+), 840 deletions(-)
copy drivers/clk/ti/{clk-7xx.c => clk-7xx-compat.c} (96%)
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 5f2385d..5ca1e39 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -17,7 +17,8 @@ obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o \
obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o \
dpll3xxx.o dpll44xx.o
obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o \
- clk-dra7-atl.o dpll3xxx.o dpll44xx.o
+ clk-dra7-atl.o dpll3xxx.o \
+ dpll44xx.o clk-7xx-compat.o
obj-$(CONFIG_SOC_AM43XX) += $(clk-common) dpll3xxx.o clk-43xx.o \
clk-43xx-compat.o
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx-compat.c
similarity index 96%
copy from drivers/clk/ti/clk-7xx.c
copy to drivers/clk/ti/clk-7xx-compat.c
index 71a122b..e3cb7f0 100644
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx-compat.c
@@ -712,7 +712,7 @@
{ 0 },
};
-const struct omap_clkctrl_data dra7_clkctrl_data[] __initconst = {
+const struct omap_clkctrl_data dra7_clkctrl_compat_data[] __initconst = {
{ 0x4a005320, dra7_mpu_clkctrl_regs },
{ 0x4a005540, dra7_ipu_clkctrl_regs },
{ 0x4a005740, dra7_rtc_clkctrl_regs },
@@ -730,7 +730,7 @@
{ 0 },
};
-static struct ti_dt_clk dra7xx_clks[] = {
+struct ti_dt_clk dra7xx_compat_clks[] = {
DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
DT_CLK(NULL, "sys_clkin_ck", "timer_sys_clk_div"),
DT_CLK(NULL, "sys_clkin", "sys_clkin1"),
@@ -821,37 +821,3 @@
DT_CLK(NULL, "usb_otg_ss2_refclk960m", "l3init_cm:0020:8"),
{ .node_name = NULL },
};
-
-int __init dra7xx_dt_clk_init(void)
-{
- int rc;
- struct clk *dpll_ck, *hdcp_ck;
-
- ti_dt_clocks_register(dra7xx_clks);
-
- omap2_clk_disable_autoidle_all();
-
- ti_clk_add_aliases();
-
- dpll_ck = clk_get_sys(NULL, "dpll_gmac_ck");
- rc = clk_set_rate(dpll_ck, DRA7_DPLL_GMAC_DEFFREQ);
- if (rc)
- pr_err("%s: failed to configure GMAC DPLL!\n", __func__);
-
- dpll_ck = clk_get_sys(NULL, "dpll_usb_ck");
- rc = clk_set_rate(dpll_ck, DRA7_DPLL_USB_DEFFREQ);
- if (rc)
- pr_err("%s: failed to configure USB DPLL!\n", __func__);
-
- dpll_ck = clk_get_sys(NULL, "dpll_usb_m2_ck");
- rc = clk_set_rate(dpll_ck, DRA7_DPLL_USB_DEFFREQ/2);
- if (rc)
- pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__);
-
- hdcp_ck = clk_get_sys(NULL, "dss_deshdcp_clk");
- rc = clk_prepare_enable(hdcp_ck);
- if (rc)
- pr_err("%s: failed to set dss_deshdcp_clk\n", __func__);
-
- return rc;
-}
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
index 71a122b..6f989f8 100644
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -22,812 +22,12 @@
#define DRA7_DPLL_GMAC_DEFFREQ 1000000000
#define DRA7_DPLL_USB_DEFFREQ 960000000
-static const struct omap_clkctrl_reg_data dra7_mpu_clkctrl_regs[] __initconst = {
- { DRA7_MPU_CLKCTRL, NULL, 0, "dpll_mpu_m2_ck" },
- { 0 },
-};
-
-static const char * const dra7_mcasp1_aux_gfclk_mux_parents[] __initconst = {
- "per_abe_x1_gfclk2_div",
- "video1_clk2_div",
- "video2_clk2_div",
- "hdmi_clk2_div",
- NULL,
-};
-
-static const char * const dra7_mcasp1_ahclkx_mux_parents[] __initconst = {
- "abe_24m_fclk",
- "abe_sys_clk_div",
- "func_24m_clk",
- "atl_clkin3_ck",
- "atl_clkin2_ck",
- "atl_clkin1_ck",
- "atl_clkin0_ck",
- "sys_clkin2",
- "ref_clkin0_ck",
- "ref_clkin1_ck",
- "ref_clkin2_ck",
- "ref_clkin3_ck",
- "mlb_clk",
- "mlbp_clk",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp1_bit_data[] __initconst = {
- { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
- { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
- { 28, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
- { 0 },
-};
-
-static const char * const dra7_timer5_gfclk_mux_parents[] __initconst = {
- "timer_sys_clk_div",
- "sys_32k_ck",
- "sys_clkin2",
- "ref_clkin0_ck",
- "ref_clkin1_ck",
- "ref_clkin2_ck",
- "ref_clkin3_ck",
- "abe_giclk_div",
- "video1_div_clk",
- "video2_div_clk",
- "hdmi_div_clk",
- "clkoutmux0_clk_mux",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer5_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_timer5_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer6_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_timer5_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer7_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_timer5_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer8_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_timer5_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const char * const dra7_uart6_gfclk_mux_parents[] __initconst = {
- "func_48m_fclk",
- "dpll_per_m2x2_ck",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart6_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_ipu_clkctrl_regs[] __initconst = {
- { DRA7_MCASP1_CLKCTRL, dra7_mcasp1_bit_data, CLKF_SW_SUP, "ipu_cm:clk:0010:22" },
- { DRA7_TIMER5_CLKCTRL, dra7_timer5_bit_data, CLKF_SW_SUP, "ipu_cm:clk:0018:24" },
- { DRA7_TIMER6_CLKCTRL, dra7_timer6_bit_data, CLKF_SW_SUP, "ipu_cm:clk:0020:24" },
- { DRA7_TIMER7_CLKCTRL, dra7_timer7_bit_data, CLKF_SW_SUP, "ipu_cm:clk:0028:24" },
- { DRA7_TIMER8_CLKCTRL, dra7_timer8_bit_data, CLKF_SW_SUP, "ipu_cm:clk:0030:24" },
- { DRA7_I2C5_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" },
- { DRA7_UART6_CLKCTRL, dra7_uart6_bit_data, CLKF_SW_SUP, "ipu_cm:clk:0040:24" },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_rtc_clkctrl_regs[] __initconst = {
- { DRA7_RTCSS_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_coreaon_clkctrl_regs[] __initconst = {
- { DRA7_SMARTREFLEX_MPU_CLKCTRL, NULL, CLKF_SW_SUP, "wkupaon_iclk_mux" },
- { DRA7_SMARTREFLEX_CORE_CLKCTRL, NULL, CLKF_SW_SUP, "wkupaon_iclk_mux" },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_l3main1_clkctrl_regs[] __initconst = {
- { DRA7_L3_MAIN_1_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_GPMC_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
- { DRA7_TPCC_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_TPTC0_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
- { DRA7_TPTC1_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
- { DRA7_VCP1_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_VCP2_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_dma_clkctrl_regs[] __initconst = {
- { DRA7_DMA_SYSTEM_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_emif_clkctrl_regs[] __initconst = {
- { DRA7_DMM_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { 0 },
-};
-
-static const char * const dra7_atl_dpll_clk_mux_parents[] __initconst = {
- "sys_32k_ck",
- "video1_clkin_ck",
- "video2_clkin_ck",
- "hdmi_clkin_ck",
- NULL,
-};
-
-static const char * const dra7_atl_gfclk_mux_parents[] __initconst = {
- "l3_iclk_div",
- "dpll_abe_m2_ck",
- "atl_cm:clk:0000:24",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_atl_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_atl_dpll_clk_mux_parents, NULL },
- { 26, TI_CLK_MUX, dra7_atl_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_atl_clkctrl_regs[] __initconst = {
- { DRA7_ATL_CLKCTRL, dra7_atl_bit_data, CLKF_SW_SUP, "atl_cm:clk:0000:26" },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_l4cfg_clkctrl_regs[] __initconst = {
- { DRA7_L4_CFG_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_SPINLOCK_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_MAILBOX1_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_MAILBOX2_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_MAILBOX3_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_MAILBOX4_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_MAILBOX5_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_MAILBOX6_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_MAILBOX7_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_MAILBOX8_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_MAILBOX9_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_MAILBOX10_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_MAILBOX11_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_MAILBOX12_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_MAILBOX13_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_l3instr_clkctrl_regs[] __initconst = {
- { DRA7_L3_MAIN_2_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
- { DRA7_L3_INSTR_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
- { 0 },
-};
-
-static const char * const dra7_dss_dss_clk_parents[] __initconst = {
- "dpll_per_h12x2_ck",
- NULL,
-};
-
-static const char * const dra7_dss_48mhz_clk_parents[] __initconst = {
- "func_48m_fclk",
- NULL,
-};
-
-static const char * const dra7_dss_hdmi_clk_parents[] __initconst = {
- "hdmi_dpll_clk_mux",
- NULL,
-};
-
-static const char * const dra7_dss_32khz_clk_parents[] __initconst = {
- "sys_32k_ck",
- NULL,
-};
-
-static const char * const dra7_dss_video1_clk_parents[] __initconst = {
- "video1_dpll_clk_mux",
- NULL,
-};
-
-static const char * const dra7_dss_video2_clk_parents[] __initconst = {
- "video2_dpll_clk_mux",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_dss_core_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_dss_dss_clk_parents, NULL },
- { 9, TI_CLK_GATE, dra7_dss_48mhz_clk_parents, NULL },
- { 10, TI_CLK_GATE, dra7_dss_hdmi_clk_parents, NULL },
- { 11, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
- { 12, TI_CLK_GATE, dra7_dss_video1_clk_parents, NULL },
- { 13, TI_CLK_GATE, dra7_dss_video2_clk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_dss_clkctrl_regs[] __initconst = {
- { DRA7_DSS_CORE_CLKCTRL, dra7_dss_core_bit_data, CLKF_SW_SUP, "dss_cm:clk:0000:8" },
- { DRA7_BB2D_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_core_h24x2_ck" },
- { 0 },
-};
-
-static const char * const dra7_mmc1_fclk_mux_parents[] __initconst = {
- "func_128m_clk",
- "dpll_per_m2x2_ck",
- NULL,
-};
-
-static const char * const dra7_mmc1_fclk_div_parents[] __initconst = {
- "l3init_cm:clk:0008:24",
- NULL,
-};
-
-static const struct omap_clkctrl_div_data dra7_mmc1_fclk_div_data __initconst = {
- .max_div = 4,
- .flags = CLK_DIVIDER_POWER_OF_TWO,
-};
-
-static const struct omap_clkctrl_bit_data dra7_mmc1_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
- { 24, TI_CLK_MUX, dra7_mmc1_fclk_mux_parents, NULL },
- { 25, TI_CLK_DIVIDER, dra7_mmc1_fclk_div_parents, &dra7_mmc1_fclk_div_data },
- { 0 },
-};
-
-static const char * const dra7_mmc2_fclk_div_parents[] __initconst = {
- "l3init_cm:clk:0010:24",
- NULL,
-};
-
-static const struct omap_clkctrl_div_data dra7_mmc2_fclk_div_data __initconst = {
- .max_div = 4,
- .flags = CLK_DIVIDER_POWER_OF_TWO,
-};
-
-static const struct omap_clkctrl_bit_data dra7_mmc2_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
- { 24, TI_CLK_MUX, dra7_mmc1_fclk_mux_parents, NULL },
- { 25, TI_CLK_DIVIDER, dra7_mmc2_fclk_div_parents, &dra7_mmc2_fclk_div_data },
- { 0 },
-};
-
-static const char * const dra7_usb_otg_ss2_refclk960m_parents[] __initconst = {
- "l3init_960m_gfclk",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_usb_otg_ss2_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_usb_otg_ss2_refclk960m_parents, NULL },
- { 0 },
-};
-
-static const char * const dra7_sata_ref_clk_parents[] __initconst = {
- "sys_clkin1",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_sata_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_sata_ref_clk_parents, NULL },
- { 0 },
-};
-
-static const char * const dra7_optfclk_pciephy1_clk_parents[] __initconst = {
- "apll_pcie_ck",
- NULL,
-};
-
-static const char * const dra7_optfclk_pciephy1_div_clk_parents[] __initconst = {
- "optfclk_pciephy_div",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_pcie1_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
- { 9, TI_CLK_GATE, dra7_optfclk_pciephy1_clk_parents, NULL },
- { 10, TI_CLK_GATE, dra7_optfclk_pciephy1_div_clk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_pcie2_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
- { 9, TI_CLK_GATE, dra7_optfclk_pciephy1_clk_parents, NULL },
- { 10, TI_CLK_GATE, dra7_optfclk_pciephy1_div_clk_parents, NULL },
- { 0 },
-};
-
-static const char * const dra7_rmii_50mhz_clk_mux_parents[] __initconst = {
- "dpll_gmac_h11x2_ck",
- "rmii_clk_ck",
- NULL,
-};
-
-static const char * const dra7_gmac_rft_clk_mux_parents[] __initconst = {
- "video1_clkin_ck",
- "video2_clkin_ck",
- "dpll_abe_m2_ck",
- "hdmi_clkin_ck",
- "l3_iclk_div",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_gmac_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_rmii_50mhz_clk_mux_parents, NULL },
- { 25, TI_CLK_MUX, dra7_gmac_rft_clk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_usb_otg_ss1_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_usb_otg_ss2_refclk960m_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_l3init_clkctrl_regs[] __initconst = {
- { DRA7_MMC1_CLKCTRL, dra7_mmc1_bit_data, CLKF_SW_SUP, "l3init_cm:clk:0008:25" },
- { DRA7_MMC2_CLKCTRL, dra7_mmc2_bit_data, CLKF_SW_SUP, "l3init_cm:clk:0010:25" },
- { DRA7_USB_OTG_SS2_CLKCTRL, dra7_usb_otg_ss2_bit_data, CLKF_HW_SUP, "dpll_core_h13x2_ck" },
- { DRA7_USB_OTG_SS3_CLKCTRL, NULL, CLKF_HW_SUP, "dpll_core_h13x2_ck" },
- { DRA7_USB_OTG_SS4_CLKCTRL, NULL, CLKF_HW_SUP, "dpll_core_h13x2_ck" },
- { DRA7_SATA_CLKCTRL, dra7_sata_bit_data, CLKF_SW_SUP, "func_48m_fclk" },
- { DRA7_PCIE1_CLKCTRL, dra7_pcie1_bit_data, CLKF_SW_SUP, "l4_root_clk_div", "pcie_clkdm" },
- { DRA7_PCIE2_CLKCTRL, dra7_pcie2_bit_data, CLKF_SW_SUP, "l4_root_clk_div", "pcie_clkdm" },
- { DRA7_GMAC_CLKCTRL, dra7_gmac_bit_data, CLKF_SW_SUP, "dpll_gmac_ck", "gmac_clkdm" },
- { DRA7_OCP2SCP1_CLKCTRL, NULL, CLKF_HW_SUP, "l4_root_clk_div" },
- { DRA7_OCP2SCP3_CLKCTRL, NULL, CLKF_HW_SUP, "l4_root_clk_div" },
- { DRA7_USB_OTG_SS1_CLKCTRL, dra7_usb_otg_ss1_bit_data, CLKF_HW_SUP, "dpll_core_h13x2_ck" },
- { 0 },
-};
-
-static const char * const dra7_timer10_gfclk_mux_parents[] __initconst = {
- "timer_sys_clk_div",
- "sys_32k_ck",
- "sys_clkin2",
- "ref_clkin0_ck",
- "ref_clkin1_ck",
- "ref_clkin2_ck",
- "ref_clkin3_ck",
- "abe_giclk_div",
- "video1_div_clk",
- "video2_div_clk",
- "hdmi_div_clk",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer10_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer11_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer2_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer3_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer4_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer9_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio2_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio3_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio4_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio5_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio6_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer13_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer14_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer15_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio7_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio8_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
- { 0 },
-};
-
-static const char * const dra7_mmc3_gfclk_div_parents[] __initconst = {
- "l4per_cm:clk:0120:24",
- NULL,
-};
-
-static const struct omap_clkctrl_div_data dra7_mmc3_gfclk_div_data __initconst = {
- .max_div = 4,
- .flags = CLK_DIVIDER_POWER_OF_TWO,
-};
-
-static const struct omap_clkctrl_bit_data dra7_mmc3_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
- { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
- { 25, TI_CLK_DIVIDER, dra7_mmc3_gfclk_div_parents, &dra7_mmc3_gfclk_div_data },
- { 0 },
-};
-
-static const char * const dra7_mmc4_gfclk_div_parents[] __initconst = {
- "l4per_cm:clk:0128:24",
- NULL,
-};
-
-static const struct omap_clkctrl_div_data dra7_mmc4_gfclk_div_data __initconst = {
- .max_div = 4,
- .flags = CLK_DIVIDER_POWER_OF_TWO,
-};
-
-static const struct omap_clkctrl_bit_data dra7_mmc4_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
- { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
- { 25, TI_CLK_DIVIDER, dra7_mmc4_gfclk_div_parents, &dra7_mmc4_gfclk_div_data },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer16_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const char * const dra7_qspi_gfclk_mux_parents[] __initconst = {
- "func_128m_clk",
- "dpll_per_h13x2_ck",
- NULL,
-};
-
-static const char * const dra7_qspi_gfclk_div_parents[] __initconst = {
- "l4per_cm:clk:0138:24",
- NULL,
-};
-
-static const struct omap_clkctrl_div_data dra7_qspi_gfclk_div_data __initconst = {
- .max_div = 4,
- .flags = CLK_DIVIDER_POWER_OF_TWO,
-};
-
-static const struct omap_clkctrl_bit_data dra7_qspi_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_qspi_gfclk_mux_parents, NULL },
- { 25, TI_CLK_DIVIDER, dra7_qspi_gfclk_div_parents, &dra7_qspi_gfclk_div_data },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart1_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart2_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart3_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart4_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp2_bit_data[] __initconst = {
- { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
- { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
- { 28, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp3_bit_data[] __initconst = {
- { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
- { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart5_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp5_bit_data[] __initconst = {
- { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
- { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp8_bit_data[] __initconst = {
- { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
- { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp4_bit_data[] __initconst = {
- { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
- { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart7_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart8_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart9_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp6_bit_data[] __initconst = {
- { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
- { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp7_bit_data[] __initconst = {
- { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
- { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_l4per_clkctrl_regs[] __initconst = {
- { DRA7_L4_PER2_CLKCTRL, NULL, 0, "l3_iclk_div", "l4per2_clkdm" },
- { DRA7_L4_PER3_CLKCTRL, NULL, 0, "l3_iclk_div", "l4per3_clkdm" },
- { DRA7_TIMER10_CLKCTRL, dra7_timer10_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0028:24" },
- { DRA7_TIMER11_CLKCTRL, dra7_timer11_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0030:24" },
- { DRA7_TIMER2_CLKCTRL, dra7_timer2_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0038:24" },
- { DRA7_TIMER3_CLKCTRL, dra7_timer3_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0040:24" },
- { DRA7_TIMER4_CLKCTRL, dra7_timer4_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0048:24" },
- { DRA7_TIMER9_CLKCTRL, dra7_timer9_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0050:24" },
- { DRA7_ELM_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_GPIO2_CLKCTRL, dra7_gpio2_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
- { DRA7_GPIO3_CLKCTRL, dra7_gpio3_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
- { DRA7_GPIO4_CLKCTRL, dra7_gpio4_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
- { DRA7_GPIO5_CLKCTRL, dra7_gpio5_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
- { DRA7_GPIO6_CLKCTRL, dra7_gpio6_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
- { DRA7_HDQ1W_CLKCTRL, NULL, CLKF_SW_SUP, "func_12m_fclk" },
- { DRA7_EPWMSS1_CLKCTRL, NULL, CLKF_SW_SUP, "l4_root_clk_div", "l4per2_clkdm" },
- { DRA7_EPWMSS2_CLKCTRL, NULL, CLKF_SW_SUP, "l4_root_clk_div", "l4per2_clkdm" },
- { DRA7_I2C1_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" },
- { DRA7_I2C2_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" },
- { DRA7_I2C3_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" },
- { DRA7_I2C4_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" },
- { DRA7_L4_PER1_CLKCTRL, NULL, 0, "l3_iclk_div" },
- { DRA7_EPWMSS0_CLKCTRL, NULL, CLKF_SW_SUP, "l4_root_clk_div", "l4per2_clkdm" },
- { DRA7_TIMER13_CLKCTRL, dra7_timer13_bit_data, CLKF_SW_SUP, "l4per_cm:clk:00c8:24", "l4per3_clkdm" },
- { DRA7_TIMER14_CLKCTRL, dra7_timer14_bit_data, CLKF_SW_SUP, "l4per_cm:clk:00d0:24", "l4per3_clkdm" },
- { DRA7_TIMER15_CLKCTRL, dra7_timer15_bit_data, CLKF_SW_SUP, "l4per_cm:clk:00d8:24", "l4per3_clkdm" },
- { DRA7_MCSPI1_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" },
- { DRA7_MCSPI2_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" },
- { DRA7_MCSPI3_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" },
- { DRA7_MCSPI4_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" },
- { DRA7_GPIO7_CLKCTRL, dra7_gpio7_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
- { DRA7_GPIO8_CLKCTRL, dra7_gpio8_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
- { DRA7_MMC3_CLKCTRL, dra7_mmc3_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0120:25" },
- { DRA7_MMC4_CLKCTRL, dra7_mmc4_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0128:25" },
- { DRA7_TIMER16_CLKCTRL, dra7_timer16_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0130:24", "l4per3_clkdm" },
- { DRA7_QSPI_CLKCTRL, dra7_qspi_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0138:25", "l4per2_clkdm" },
- { DRA7_UART1_CLKCTRL, dra7_uart1_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0140:24" },
- { DRA7_UART2_CLKCTRL, dra7_uart2_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0148:24" },
- { DRA7_UART3_CLKCTRL, dra7_uart3_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0150:24" },
- { DRA7_UART4_CLKCTRL, dra7_uart4_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0158:24" },
- { DRA7_MCASP2_CLKCTRL, dra7_mcasp2_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0160:22", "l4per2_clkdm" },
- { DRA7_MCASP3_CLKCTRL, dra7_mcasp3_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0168:22", "l4per2_clkdm" },
- { DRA7_UART5_CLKCTRL, dra7_uart5_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0170:24" },
- { DRA7_MCASP5_CLKCTRL, dra7_mcasp5_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0178:22", "l4per2_clkdm" },
- { DRA7_MCASP8_CLKCTRL, dra7_mcasp8_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0190:24", "l4per2_clkdm" },
- { DRA7_MCASP4_CLKCTRL, dra7_mcasp4_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0198:22", "l4per2_clkdm" },
- { DRA7_AES1_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div", "l4sec_clkdm" },
- { DRA7_AES2_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div", "l4sec_clkdm" },
- { DRA7_DES_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div", "l4sec_clkdm" },
- { DRA7_RNG_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div", "l4sec_clkdm" },
- { DRA7_SHAM_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div", "l4sec_clkdm" },
- { DRA7_UART7_CLKCTRL, dra7_uart7_bit_data, CLKF_SW_SUP, "l4per_cm:clk:01d0:24", "l4per2_clkdm" },
- { DRA7_UART8_CLKCTRL, dra7_uart8_bit_data, CLKF_SW_SUP, "l4per_cm:clk:01e0:24", "l4per2_clkdm" },
- { DRA7_UART9_CLKCTRL, dra7_uart9_bit_data, CLKF_SW_SUP, "l4per_cm:clk:01e8:24", "l4per2_clkdm" },
- { DRA7_DCAN2_CLKCTRL, NULL, CLKF_SW_SUP, "sys_clkin1", "l4per2_clkdm" },
- { DRA7_MCASP6_CLKCTRL, dra7_mcasp6_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0204:22", "l4per2_clkdm" },
- { DRA7_MCASP7_CLKCTRL, dra7_mcasp7_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0208:22", "l4per2_clkdm" },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio1_bit_data[] __initconst = {
- { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer1_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart10_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
- { 0 },
-};
-
-static const char * const dra7_dcan1_sys_clk_mux_parents[] __initconst = {
- "sys_clkin1",
- "sys_clkin2",
- NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_dcan1_bit_data[] __initconst = {
- { 24, TI_CLK_MUX, dra7_dcan1_sys_clk_mux_parents, NULL },
- { 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_wkupaon_clkctrl_regs[] __initconst = {
- { DRA7_L4_WKUP_CLKCTRL, NULL, 0, "wkupaon_iclk_mux" },
- { DRA7_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" },
- { DRA7_GPIO1_CLKCTRL, dra7_gpio1_bit_data, CLKF_HW_SUP, "wkupaon_iclk_mux" },
- { DRA7_TIMER1_CLKCTRL, dra7_timer1_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0020:24" },
- { DRA7_TIMER12_CLKCTRL, NULL, 0, "secure_32k_clk_src_ck" },
- { DRA7_COUNTER_32K_CLKCTRL, NULL, 0, "wkupaon_iclk_mux" },
- { DRA7_UART10_CLKCTRL, dra7_uart10_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0060:24" },
- { DRA7_DCAN1_CLKCTRL, dra7_dcan1_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0068:24" },
- { DRA7_ADC_CLKCTRL, NULL, CLKF_SW_SUP, "mcan_clk"},
- { 0 },
-};
-
-const struct omap_clkctrl_data dra7_clkctrl_data[] __initconst = {
- { 0x4a005320, dra7_mpu_clkctrl_regs },
- { 0x4a005540, dra7_ipu_clkctrl_regs },
- { 0x4a005740, dra7_rtc_clkctrl_regs },
- { 0x4a008620, dra7_coreaon_clkctrl_regs },
- { 0x4a008720, dra7_l3main1_clkctrl_regs },
- { 0x4a008a20, dra7_dma_clkctrl_regs },
- { 0x4a008b20, dra7_emif_clkctrl_regs },
- { 0x4a008c00, dra7_atl_clkctrl_regs },
- { 0x4a008d20, dra7_l4cfg_clkctrl_regs },
- { 0x4a008e20, dra7_l3instr_clkctrl_regs },
- { 0x4a009120, dra7_dss_clkctrl_regs },
- { 0x4a009320, dra7_l3init_clkctrl_regs },
- { 0x4a009700, dra7_l4per_clkctrl_regs },
- { 0x4ae07820, dra7_wkupaon_clkctrl_regs },
- { 0 },
-};
-
-static struct ti_dt_clk dra7xx_clks[] = {
- DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
- DT_CLK(NULL, "sys_clkin_ck", "timer_sys_clk_div"),
- DT_CLK(NULL, "sys_clkin", "sys_clkin1"),
- DT_CLK(NULL, "atl_dpll_clk_mux", "atl_cm:0000:24"),
- DT_CLK(NULL, "atl_gfclk_mux", "atl_cm:0000:26"),
- DT_CLK(NULL, "dcan1_sys_clk_mux", "wkupaon_cm:0068:24"),
- DT_CLK(NULL, "dss_32khz_clk", "dss_cm:0000:11"),
- DT_CLK(NULL, "dss_48mhz_clk", "dss_cm:0000:9"),
- DT_CLK(NULL, "dss_dss_clk", "dss_cm:0000:8"),
- DT_CLK(NULL, "dss_hdmi_clk", "dss_cm:0000:10"),
- DT_CLK(NULL, "dss_video1_clk", "dss_cm:0000:12"),
- DT_CLK(NULL, "dss_video2_clk", "dss_cm:0000:13"),
- DT_CLK(NULL, "gmac_rft_clk_mux", "l3init_cm:00b0:25"),
- DT_CLK(NULL, "gpio1_dbclk", "wkupaon_cm:0018:8"),
- DT_CLK(NULL, "gpio2_dbclk", "l4per_cm:0060:8"),
- DT_CLK(NULL, "gpio3_dbclk", "l4per_cm:0068:8"),
- DT_CLK(NULL, "gpio4_dbclk", "l4per_cm:0070:8"),
- DT_CLK(NULL, "gpio5_dbclk", "l4per_cm:0078:8"),
- DT_CLK(NULL, "gpio6_dbclk", "l4per_cm:0080:8"),
- DT_CLK(NULL, "gpio7_dbclk", "l4per_cm:0110:8"),
- DT_CLK(NULL, "gpio8_dbclk", "l4per_cm:0118:8"),
- DT_CLK(NULL, "mcasp1_ahclkr_mux", "ipu_cm:0010:28"),
- DT_CLK(NULL, "mcasp1_ahclkx_mux", "ipu_cm:0010:24"),
- DT_CLK(NULL, "mcasp1_aux_gfclk_mux", "ipu_cm:0010:22"),
- DT_CLK(NULL, "mcasp2_ahclkr_mux", "l4per_cm:0160:28"),
- DT_CLK(NULL, "mcasp2_ahclkx_mux", "l4per_cm:0160:24"),
- DT_CLK(NULL, "mcasp2_aux_gfclk_mux", "l4per_cm:0160:22"),
- DT_CLK(NULL, "mcasp3_ahclkx_mux", "l4per_cm:0168:24"),
- DT_CLK(NULL, "mcasp3_aux_gfclk_mux", "l4per_cm:0168:22"),
- DT_CLK(NULL, "mcasp4_ahclkx_mux", "l4per_cm:0198:24"),
- DT_CLK(NULL, "mcasp4_aux_gfclk_mux", "l4per_cm:0198:22"),
- DT_CLK(NULL, "mcasp5_ahclkx_mux", "l4per_cm:0178:24"),
- DT_CLK(NULL, "mcasp5_aux_gfclk_mux", "l4per_cm:0178:22"),
- DT_CLK(NULL, "mcasp6_ahclkx_mux", "l4per_cm:0204:24"),
- DT_CLK(NULL, "mcasp6_aux_gfclk_mux", "l4per_cm:0204:22"),
- DT_CLK(NULL, "mcasp7_ahclkx_mux", "l4per_cm:0208:24"),
- DT_CLK(NULL, "mcasp7_aux_gfclk_mux", "l4per_cm:0208:22"),
- DT_CLK(NULL, "mcasp8_ahclkx_mux", "l4per_cm:0190:22"),
- DT_CLK(NULL, "mcasp8_aux_gfclk_mux", "l4per_cm:0190:24"),
- DT_CLK(NULL, "mmc1_clk32k", "l3init_cm:0008:8"),
- DT_CLK(NULL, "mmc1_fclk_div", "l3init_cm:0008:25"),
- DT_CLK(NULL, "mmc1_fclk_mux", "l3init_cm:0008:24"),
- DT_CLK(NULL, "mmc2_clk32k", "l3init_cm:0010:8"),
- DT_CLK(NULL, "mmc2_fclk_div", "l3init_cm:0010:25"),
- DT_CLK(NULL, "mmc2_fclk_mux", "l3init_cm:0010:24"),
- DT_CLK(NULL, "mmc3_clk32k", "l4per_cm:0120:8"),
- DT_CLK(NULL, "mmc3_gfclk_div", "l4per_cm:0120:25"),
- DT_CLK(NULL, "mmc3_gfclk_mux", "l4per_cm:0120:24"),
- DT_CLK(NULL, "mmc4_clk32k", "l4per_cm:0128:8"),
- DT_CLK(NULL, "mmc4_gfclk_div", "l4per_cm:0128:25"),
- DT_CLK(NULL, "mmc4_gfclk_mux", "l4per_cm:0128:24"),
- DT_CLK(NULL, "optfclk_pciephy1_32khz", "l3init_cm:0090:8"),
- DT_CLK(NULL, "optfclk_pciephy1_clk", "l3init_cm:0090:9"),
- DT_CLK(NULL, "optfclk_pciephy1_div_clk", "l3init_cm:0090:10"),
- DT_CLK(NULL, "optfclk_pciephy2_32khz", "l3init_cm:0098:8"),
- DT_CLK(NULL, "optfclk_pciephy2_clk", "l3init_cm:0098:9"),
- DT_CLK(NULL, "optfclk_pciephy2_div_clk", "l3init_cm:0098:10"),
- DT_CLK(NULL, "qspi_gfclk_div", "l4per_cm:0138:25"),
- DT_CLK(NULL, "qspi_gfclk_mux", "l4per_cm:0138:24"),
- DT_CLK(NULL, "rmii_50mhz_clk_mux", "l3init_cm:00b0:24"),
- DT_CLK(NULL, "sata_ref_clk", "l3init_cm:0068:8"),
- DT_CLK(NULL, "timer10_gfclk_mux", "l4per_cm:0028:24"),
- DT_CLK(NULL, "timer11_gfclk_mux", "l4per_cm:0030:24"),
- DT_CLK(NULL, "timer13_gfclk_mux", "l4per_cm:00c8:24"),
- DT_CLK(NULL, "timer14_gfclk_mux", "l4per_cm:00d0:24"),
- DT_CLK(NULL, "timer15_gfclk_mux", "l4per_cm:00d8:24"),
- DT_CLK(NULL, "timer16_gfclk_mux", "l4per_cm:0130:24"),
- DT_CLK(NULL, "timer1_gfclk_mux", "wkupaon_cm:0020:24"),
- DT_CLK(NULL, "timer2_gfclk_mux", "l4per_cm:0038:24"),
- DT_CLK(NULL, "timer3_gfclk_mux", "l4per_cm:0040:24"),
- DT_CLK(NULL, "timer4_gfclk_mux", "l4per_cm:0048:24"),
- DT_CLK(NULL, "timer5_gfclk_mux", "ipu_cm:0018:24"),
- DT_CLK(NULL, "timer6_gfclk_mux", "ipu_cm:0020:24"),
- DT_CLK(NULL, "timer7_gfclk_mux", "ipu_cm:0028:24"),
- DT_CLK(NULL, "timer8_gfclk_mux", "ipu_cm:0030:24"),
- DT_CLK(NULL, "timer9_gfclk_mux", "l4per_cm:0050:24"),
- DT_CLK(NULL, "uart10_gfclk_mux", "wkupaon_cm:0060:24"),
- DT_CLK(NULL, "uart1_gfclk_mux", "l4per_cm:0140:24"),
- DT_CLK(NULL, "uart2_gfclk_mux", "l4per_cm:0148:24"),
- DT_CLK(NULL, "uart3_gfclk_mux", "l4per_cm:0150:24"),
- DT_CLK(NULL, "uart4_gfclk_mux", "l4per_cm:0158:24"),
- DT_CLK(NULL, "uart5_gfclk_mux", "l4per_cm:0170:24"),
- DT_CLK(NULL, "uart6_gfclk_mux", "ipu_cm:0040:24"),
- DT_CLK(NULL, "uart7_gfclk_mux", "l4per_cm:01d0:24"),
- DT_CLK(NULL, "uart8_gfclk_mux", "l4per_cm:01e0:24"),
- DT_CLK(NULL, "uart9_gfclk_mux", "l4per_cm:01e8:24"),
- DT_CLK(NULL, "usb_otg_ss1_refclk960m", "l3init_cm:00d0:8"),
- DT_CLK(NULL, "usb_otg_ss2_refclk960m", "l3init_cm:0020:8"),
- { .node_name = NULL },
-};
-
int __init dra7xx_dt_clk_init(void)
{
int rc;
struct clk *dpll_ck, *hdcp_ck;
- ti_dt_clocks_register(dra7xx_clks);
+ ti_dt_clocks_register(dra7xx_compat_clks);
omap2_clk_disable_autoidle_all();
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index f41542a..2e42556 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -464,7 +464,7 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
#endif
#ifdef CONFIG_SOC_DRA7XX
if (of_machine_is_compatible("ti,dra7"))
- data = dra7_clkctrl_data;
+ data = dra7_clkctrl_compat_data;
#endif
#ifdef CONFIG_SOC_AM33XX
if (of_machine_is_compatible("ti,am33xx")) {
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 11348de5..c729f87 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -183,7 +183,8 @@ struct omap_clkctrl_data {
extern const struct omap_clkctrl_data omap4_clkctrl_data[];
extern const struct omap_clkctrl_data omap5_clkctrl_data[];
-extern const struct omap_clkctrl_data dra7_clkctrl_data[];
+extern const struct omap_clkctrl_data dra7_clkctrl_compat_data[];
+extern struct ti_dt_clk dra7xx_compat_clks[];
extern const struct omap_clkctrl_data am3_clkctrl_data[];
extern const struct omap_clkctrl_data am3_clkctrl_compat_data[];
extern struct ti_dt_clk am33xx_compat_clks[];
--
1.9.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 11/11] clk: ti: dra7: add new clkctrl data
2018-08-31 15:06 [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries Tero Kristo
` (9 preceding siblings ...)
2018-08-31 15:07 ` [PATCH 10/11] clk: ti: dra7xx: rename existing clkctrl data as compat data Tero Kristo
@ 2018-08-31 15:07 ` Tero Kristo
2018-09-04 15:36 ` [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries Tony Lindgren
11 siblings, 0 replies; 27+ messages in thread
From: Tero Kristo @ 2018-08-31 15:07 UTC (permalink / raw)
To: linux-clk, sboyd, mturquette; +Cc: linux-omap, tony
The new clkctrl data layout for dra7xx is split based on clockdomain
boundaries. Previously the split was based on CM boundaries. This patch
adds the new data as separate data entity, retaining the compatibility
data also for now. The compatibility data can be removed once no longer
needed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
drivers/clk/ti/clk-7xx.c | 868 ++++++++++++++++++++++++++++++++++++++++++++++-
drivers/clk/ti/clkctrl.c | 8 +-
drivers/clk/ti/clock.h | 1 +
3 files changed, 874 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
index 6f989f8..597fb4a 100644
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -22,12 +22,878 @@
#define DRA7_DPLL_GMAC_DEFFREQ 1000000000
#define DRA7_DPLL_USB_DEFFREQ 960000000
+static const struct omap_clkctrl_reg_data dra7_mpu_clkctrl_regs[] __initconst = {
+ { DRA7_MPU_MPU_CLKCTRL, NULL, 0, "dpll_mpu_m2_ck" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_dsp1_clkctrl_regs[] __initconst = {
+ { DRA7_DSP1_MMU0_DSP1_CLKCTRL, NULL, CLKF_HW_SUP, "dpll_dsp_m2_ck" },
+ { 0 },
+};
+
+static const char * const dra7_ipu1_gfclk_mux_parents[] __initconst = {
+ "dpll_abe_m2x2_ck",
+ "dpll_core_h22x2_ck",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data dra7_mmu_ipu1_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_ipu1_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_ipu1_clkctrl_regs[] __initconst = {
+ { DRA7_IPU1_MMU_IPU1_CLKCTRL, dra7_mmu_ipu1_bit_data, CLKF_HW_SUP, "ipu1-clkctrl:0000:24" },
+ { 0 },
+};
+
+static const char * const dra7_mcasp1_aux_gfclk_mux_parents[] __initconst = {
+ "per_abe_x1_gfclk2_div",
+ "video1_clk2_div",
+ "video2_clk2_div",
+ "hdmi_clk2_div",
+ NULL,
+};
+
+static const char * const dra7_mcasp1_ahclkx_mux_parents[] __initconst = {
+ "abe_24m_fclk",
+ "abe_sys_clk_div",
+ "func_24m_clk",
+ "atl_clkin3_ck",
+ "atl_clkin2_ck",
+ "atl_clkin1_ck",
+ "atl_clkin0_ck",
+ "sys_clkin2",
+ "ref_clkin0_ck",
+ "ref_clkin1_ck",
+ "ref_clkin2_ck",
+ "ref_clkin3_ck",
+ "mlb_clk",
+ "mlbp_clk",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data dra7_mcasp1_bit_data[] __initconst = {
+ { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
+ { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
+ { 28, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
+ { 0 },
+};
+
+static const char * const dra7_timer5_gfclk_mux_parents[] __initconst = {
+ "timer_sys_clk_div",
+ "sys_32k_ck",
+ "sys_clkin2",
+ "ref_clkin0_ck",
+ "ref_clkin1_ck",
+ "ref_clkin2_ck",
+ "ref_clkin3_ck",
+ "abe_giclk_div",
+ "video1_div_clk",
+ "video2_div_clk",
+ "hdmi_div_clk",
+ "clkoutmux0_clk_mux",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data dra7_timer5_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_timer5_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_timer6_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_timer5_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_timer7_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_timer5_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_timer8_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_timer5_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const char * const dra7_uart6_gfclk_mux_parents[] __initconst = {
+ "func_48m_fclk",
+ "dpll_per_m2x2_ck",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data dra7_uart6_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_ipu_clkctrl_regs[] __initconst = {
+ { DRA7_IPU_MCASP1_CLKCTRL, dra7_mcasp1_bit_data, CLKF_SW_SUP, "ipu-clkctrl:0000:22" },
+ { DRA7_IPU_TIMER5_CLKCTRL, dra7_timer5_bit_data, CLKF_SW_SUP, "ipu-clkctrl:0008:24" },
+ { DRA7_IPU_TIMER6_CLKCTRL, dra7_timer6_bit_data, CLKF_SW_SUP, "ipu-clkctrl:0010:24" },
+ { DRA7_IPU_TIMER7_CLKCTRL, dra7_timer7_bit_data, CLKF_SW_SUP, "ipu-clkctrl:0018:24" },
+ { DRA7_IPU_TIMER8_CLKCTRL, dra7_timer8_bit_data, CLKF_SW_SUP, "ipu-clkctrl:0020:24" },
+ { DRA7_IPU_I2C5_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" },
+ { DRA7_IPU_UART6_CLKCTRL, dra7_uart6_bit_data, CLKF_SW_SUP, "ipu-clkctrl:0030:24" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_dsp2_clkctrl_regs[] __initconst = {
+ { DRA7_DSP2_MMU0_DSP2_CLKCTRL, NULL, CLKF_HW_SUP, "dpll_dsp_m2_ck" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_rtc_clkctrl_regs[] __initconst = {
+ { DRA7_RTC_RTCSS_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_coreaon_clkctrl_regs[] __initconst = {
+ { DRA7_COREAON_SMARTREFLEX_MPU_CLKCTRL, NULL, CLKF_SW_SUP, "wkupaon_iclk_mux" },
+ { DRA7_COREAON_SMARTREFLEX_CORE_CLKCTRL, NULL, CLKF_SW_SUP, "wkupaon_iclk_mux" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_l3main1_clkctrl_regs[] __initconst = {
+ { DRA7_L3MAIN1_L3_MAIN_1_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L3MAIN1_GPMC_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
+ { DRA7_L3MAIN1_TPCC_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L3MAIN1_TPTC0_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
+ { DRA7_L3MAIN1_TPTC1_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
+ { DRA7_L3MAIN1_VCP1_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L3MAIN1_VCP2_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_ipu2_clkctrl_regs[] __initconst = {
+ { DRA7_IPU2_MMU_IPU2_CLKCTRL, NULL, CLKF_HW_SUP, "dpll_core_h22x2_ck" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_dma_clkctrl_regs[] __initconst = {
+ { DRA7_DMA_DMA_SYSTEM_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_emif_clkctrl_regs[] __initconst = {
+ { DRA7_EMIF_DMM_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { 0 },
+};
+
+static const char * const dra7_atl_dpll_clk_mux_parents[] __initconst = {
+ "sys_32k_ck",
+ "video1_clkin_ck",
+ "video2_clkin_ck",
+ "hdmi_clkin_ck",
+ NULL,
+};
+
+static const char * const dra7_atl_gfclk_mux_parents[] __initconst = {
+ "l3_iclk_div",
+ "dpll_abe_m2_ck",
+ "atl-clkctrl:0000:24",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data dra7_atl_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_atl_dpll_clk_mux_parents, NULL },
+ { 26, TI_CLK_MUX, dra7_atl_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_atl_clkctrl_regs[] __initconst = {
+ { DRA7_ATL_ATL_CLKCTRL, dra7_atl_bit_data, CLKF_SW_SUP, "atl-clkctrl:0000:26" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_l4cfg_clkctrl_regs[] __initconst = {
+ { DRA7_L4CFG_L4_CFG_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4CFG_SPINLOCK_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4CFG_MAILBOX1_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4CFG_MAILBOX2_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4CFG_MAILBOX3_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4CFG_MAILBOX4_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4CFG_MAILBOX5_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4CFG_MAILBOX6_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4CFG_MAILBOX7_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4CFG_MAILBOX8_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4CFG_MAILBOX9_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4CFG_MAILBOX10_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4CFG_MAILBOX11_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4CFG_MAILBOX12_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4CFG_MAILBOX13_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_l3instr_clkctrl_regs[] __initconst = {
+ { DRA7_L3INSTR_L3_MAIN_2_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
+ { DRA7_L3INSTR_L3_INSTR_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
+ { 0 },
+};
+
+static const char * const dra7_dss_dss_clk_parents[] __initconst = {
+ "dpll_per_h12x2_ck",
+ NULL,
+};
+
+static const char * const dra7_dss_48mhz_clk_parents[] __initconst = {
+ "func_48m_fclk",
+ NULL,
+};
+
+static const char * const dra7_dss_hdmi_clk_parents[] __initconst = {
+ "hdmi_dpll_clk_mux",
+ NULL,
+};
+
+static const char * const dra7_dss_32khz_clk_parents[] __initconst = {
+ "sys_32k_ck",
+ NULL,
+};
+
+static const char * const dra7_dss_video1_clk_parents[] __initconst = {
+ "video1_dpll_clk_mux",
+ NULL,
+};
+
+static const char * const dra7_dss_video2_clk_parents[] __initconst = {
+ "video2_dpll_clk_mux",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data dra7_dss_core_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_dss_dss_clk_parents, NULL },
+ { 9, TI_CLK_GATE, dra7_dss_48mhz_clk_parents, NULL },
+ { 10, TI_CLK_GATE, dra7_dss_hdmi_clk_parents, NULL },
+ { 11, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
+ { 12, TI_CLK_GATE, dra7_dss_video1_clk_parents, NULL },
+ { 13, TI_CLK_GATE, dra7_dss_video2_clk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_dss_clkctrl_regs[] __initconst = {
+ { DRA7_DSS_DSS_CORE_CLKCTRL, dra7_dss_core_bit_data, CLKF_SW_SUP, "dss-clkctrl:0000:8" },
+ { DRA7_DSS_BB2D_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_core_h24x2_ck" },
+ { 0 },
+};
+
+static const char * const dra7_mmc1_fclk_mux_parents[] __initconst = {
+ "func_128m_clk",
+ "dpll_per_m2x2_ck",
+ NULL,
+};
+
+static const char * const dra7_mmc1_fclk_div_parents[] __initconst = {
+ "l3init-clkctrl:0008:24",
+ NULL,
+};
+
+static const struct omap_clkctrl_div_data dra7_mmc1_fclk_div_data __initconst = {
+ .max_div = 4,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+};
+
+static const struct omap_clkctrl_bit_data dra7_mmc1_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
+ { 24, TI_CLK_MUX, dra7_mmc1_fclk_mux_parents, NULL },
+ { 25, TI_CLK_DIVIDER, dra7_mmc1_fclk_div_parents, &dra7_mmc1_fclk_div_data },
+ { 0 },
+};
+
+static const char * const dra7_mmc2_fclk_div_parents[] __initconst = {
+ "l3init-clkctrl:0010:24",
+ NULL,
+};
+
+static const struct omap_clkctrl_div_data dra7_mmc2_fclk_div_data __initconst = {
+ .max_div = 4,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+};
+
+static const struct omap_clkctrl_bit_data dra7_mmc2_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
+ { 24, TI_CLK_MUX, dra7_mmc1_fclk_mux_parents, NULL },
+ { 25, TI_CLK_DIVIDER, dra7_mmc2_fclk_div_parents, &dra7_mmc2_fclk_div_data },
+ { 0 },
+};
+
+static const char * const dra7_usb_otg_ss2_refclk960m_parents[] __initconst = {
+ "l3init_960m_gfclk",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data dra7_usb_otg_ss2_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_usb_otg_ss2_refclk960m_parents, NULL },
+ { 0 },
+};
+
+static const char * const dra7_sata_ref_clk_parents[] __initconst = {
+ "sys_clkin1",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data dra7_sata_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_sata_ref_clk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_usb_otg_ss1_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_usb_otg_ss2_refclk960m_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_l3init_clkctrl_regs[] __initconst = {
+ { DRA7_L3INIT_MMC1_CLKCTRL, dra7_mmc1_bit_data, CLKF_SW_SUP, "l3init-clkctrl:0008:25" },
+ { DRA7_L3INIT_MMC2_CLKCTRL, dra7_mmc2_bit_data, CLKF_SW_SUP, "l3init-clkctrl:0010:25" },
+ { DRA7_L3INIT_USB_OTG_SS2_CLKCTRL, dra7_usb_otg_ss2_bit_data, CLKF_HW_SUP, "dpll_core_h13x2_ck" },
+ { DRA7_L3INIT_USB_OTG_SS3_CLKCTRL, NULL, CLKF_HW_SUP, "dpll_core_h13x2_ck" },
+ { DRA7_L3INIT_USB_OTG_SS4_CLKCTRL, NULL, CLKF_HW_SUP, "dpll_core_h13x2_ck" },
+ { DRA7_L3INIT_SATA_CLKCTRL, dra7_sata_bit_data, CLKF_SW_SUP, "func_48m_fclk" },
+ { DRA7_L3INIT_OCP2SCP1_CLKCTRL, NULL, CLKF_HW_SUP, "l4_root_clk_div" },
+ { DRA7_L3INIT_OCP2SCP3_CLKCTRL, NULL, CLKF_HW_SUP, "l4_root_clk_div" },
+ { DRA7_L3INIT_USB_OTG_SS1_CLKCTRL, dra7_usb_otg_ss1_bit_data, CLKF_HW_SUP, "dpll_core_h13x2_ck" },
+ { 0 },
+};
+
+static const char * const dra7_optfclk_pciephy1_clk_parents[] __initconst = {
+ "apll_pcie_ck",
+ NULL,
+};
+
+static const char * const dra7_optfclk_pciephy1_div_clk_parents[] __initconst = {
+ "optfclk_pciephy_div",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data dra7_pcie1_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
+ { 9, TI_CLK_GATE, dra7_optfclk_pciephy1_clk_parents, NULL },
+ { 10, TI_CLK_GATE, dra7_optfclk_pciephy1_div_clk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_pcie2_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
+ { 9, TI_CLK_GATE, dra7_optfclk_pciephy1_clk_parents, NULL },
+ { 10, TI_CLK_GATE, dra7_optfclk_pciephy1_div_clk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_pcie_clkctrl_regs[] __initconst = {
+ { DRA7_PCIE_PCIE1_CLKCTRL, dra7_pcie1_bit_data, CLKF_SW_SUP, "l4_root_clk_div" },
+ { DRA7_PCIE_PCIE2_CLKCTRL, dra7_pcie2_bit_data, CLKF_SW_SUP, "l4_root_clk_div" },
+ { 0 },
+};
+
+static const char * const dra7_rmii_50mhz_clk_mux_parents[] __initconst = {
+ "dpll_gmac_h11x2_ck",
+ "rmii_clk_ck",
+ NULL,
+};
+
+static const char * const dra7_gmac_rft_clk_mux_parents[] __initconst = {
+ "video1_clkin_ck",
+ "video2_clkin_ck",
+ "dpll_abe_m2_ck",
+ "hdmi_clkin_ck",
+ "l3_iclk_div",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data dra7_gmac_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_rmii_50mhz_clk_mux_parents, NULL },
+ { 25, TI_CLK_MUX, dra7_gmac_rft_clk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_gmac_clkctrl_regs[] __initconst = {
+ { DRA7_GMAC_GMAC_CLKCTRL, dra7_gmac_bit_data, CLKF_SW_SUP, "dpll_gmac_ck" },
+ { 0 },
+};
+
+static const char * const dra7_timer10_gfclk_mux_parents[] __initconst = {
+ "timer_sys_clk_div",
+ "sys_32k_ck",
+ "sys_clkin2",
+ "ref_clkin0_ck",
+ "ref_clkin1_ck",
+ "ref_clkin2_ck",
+ "ref_clkin3_ck",
+ "abe_giclk_div",
+ "video1_div_clk",
+ "video2_div_clk",
+ "hdmi_div_clk",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data dra7_timer10_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_timer11_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_timer2_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_timer3_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_timer4_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_timer9_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_gpio2_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_gpio3_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_gpio4_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_gpio5_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_gpio6_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_gpio7_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_gpio8_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
+ { 0 },
+};
+
+static const char * const dra7_mmc3_gfclk_div_parents[] __initconst = {
+ "l4per-clkctrl:00f8:24",
+ NULL,
+};
+
+static const struct omap_clkctrl_div_data dra7_mmc3_gfclk_div_data __initconst = {
+ .max_div = 4,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+};
+
+static const struct omap_clkctrl_bit_data dra7_mmc3_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
+ { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
+ { 25, TI_CLK_DIVIDER, dra7_mmc3_gfclk_div_parents, &dra7_mmc3_gfclk_div_data },
+ { 0 },
+};
+
+static const char * const dra7_mmc4_gfclk_div_parents[] __initconst = {
+ "l4per-clkctrl:0100:24",
+ NULL,
+};
+
+static const struct omap_clkctrl_div_data dra7_mmc4_gfclk_div_data __initconst = {
+ .max_div = 4,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+};
+
+static const struct omap_clkctrl_bit_data dra7_mmc4_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
+ { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
+ { 25, TI_CLK_DIVIDER, dra7_mmc4_gfclk_div_parents, &dra7_mmc4_gfclk_div_data },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_uart1_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_uart2_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_uart3_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_uart4_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_uart5_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_l4per_clkctrl_regs[] __initconst = {
+ { DRA7_L4PER_TIMER10_CLKCTRL, dra7_timer10_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0000:24" },
+ { DRA7_L4PER_TIMER11_CLKCTRL, dra7_timer11_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0008:24" },
+ { DRA7_L4PER_TIMER2_CLKCTRL, dra7_timer2_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0010:24" },
+ { DRA7_L4PER_TIMER3_CLKCTRL, dra7_timer3_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0018:24" },
+ { DRA7_L4PER_TIMER4_CLKCTRL, dra7_timer4_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0020:24" },
+ { DRA7_L4PER_TIMER9_CLKCTRL, dra7_timer9_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0028:24" },
+ { DRA7_L4PER_ELM_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4PER_GPIO2_CLKCTRL, dra7_gpio2_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
+ { DRA7_L4PER_GPIO3_CLKCTRL, dra7_gpio3_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
+ { DRA7_L4PER_GPIO4_CLKCTRL, dra7_gpio4_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
+ { DRA7_L4PER_GPIO5_CLKCTRL, dra7_gpio5_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
+ { DRA7_L4PER_GPIO6_CLKCTRL, dra7_gpio6_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
+ { DRA7_L4PER_HDQ1W_CLKCTRL, NULL, CLKF_SW_SUP, "func_12m_fclk" },
+ { DRA7_L4PER_I2C1_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" },
+ { DRA7_L4PER_I2C2_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" },
+ { DRA7_L4PER_I2C3_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" },
+ { DRA7_L4PER_I2C4_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" },
+ { DRA7_L4PER_L4_PER1_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4PER_MCSPI1_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" },
+ { DRA7_L4PER_MCSPI2_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" },
+ { DRA7_L4PER_MCSPI3_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" },
+ { DRA7_L4PER_MCSPI4_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" },
+ { DRA7_L4PER_GPIO7_CLKCTRL, dra7_gpio7_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
+ { DRA7_L4PER_GPIO8_CLKCTRL, dra7_gpio8_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
+ { DRA7_L4PER_MMC3_CLKCTRL, dra7_mmc3_bit_data, CLKF_SW_SUP, "l4per-clkctrl:00f8:25" },
+ { DRA7_L4PER_MMC4_CLKCTRL, dra7_mmc4_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0100:25" },
+ { DRA7_L4PER_UART1_CLKCTRL, dra7_uart1_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0118:24" },
+ { DRA7_L4PER_UART2_CLKCTRL, dra7_uart2_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0120:24" },
+ { DRA7_L4PER_UART3_CLKCTRL, dra7_uart3_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0128:24" },
+ { DRA7_L4PER_UART4_CLKCTRL, dra7_uart4_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0130:24" },
+ { DRA7_L4PER_UART5_CLKCTRL, dra7_uart5_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0148:24" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_l4sec_clkctrl_regs[] __initconst = {
+ { DRA7_L4SEC_AES1_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
+ { DRA7_L4SEC_AES2_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
+ { DRA7_L4SEC_DES_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
+ { DRA7_L4SEC_RNG_CLKCTRL, NULL, CLKF_HW_SUP, "" },
+ { DRA7_L4SEC_SHAM_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
+ { 0 },
+};
+
+static const char * const dra7_qspi_gfclk_mux_parents[] __initconst = {
+ "func_128m_clk",
+ "dpll_per_h13x2_ck",
+ NULL,
+};
+
+static const char * const dra7_qspi_gfclk_div_parents[] __initconst = {
+ "l4per2-clkctrl:012c:24",
+ NULL,
+};
+
+static const struct omap_clkctrl_div_data dra7_qspi_gfclk_div_data __initconst = {
+ .max_div = 4,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+};
+
+static const struct omap_clkctrl_bit_data dra7_qspi_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_qspi_gfclk_mux_parents, NULL },
+ { 25, TI_CLK_DIVIDER, dra7_qspi_gfclk_div_parents, &dra7_qspi_gfclk_div_data },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_mcasp2_bit_data[] __initconst = {
+ { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
+ { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
+ { 28, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_mcasp3_bit_data[] __initconst = {
+ { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
+ { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_mcasp5_bit_data[] __initconst = {
+ { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
+ { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_mcasp8_bit_data[] __initconst = {
+ { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
+ { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_mcasp4_bit_data[] __initconst = {
+ { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
+ { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_uart7_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_uart8_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_uart9_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_mcasp6_bit_data[] __initconst = {
+ { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
+ { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_mcasp7_bit_data[] __initconst = {
+ { 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
+ { 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_l4per2_clkctrl_regs[] __initconst = {
+ { DRA7_L4PER2_L4_PER2_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4PER2_PRUSS1_CLKCTRL, NULL, CLKF_SW_SUP, "" },
+ { DRA7_L4PER2_PRUSS2_CLKCTRL, NULL, CLKF_SW_SUP, "" },
+ { DRA7_L4PER2_EPWMSS1_CLKCTRL, NULL, CLKF_SW_SUP, "l4_root_clk_div" },
+ { DRA7_L4PER2_EPWMSS2_CLKCTRL, NULL, CLKF_SW_SUP, "l4_root_clk_div" },
+ { DRA7_L4PER2_EPWMSS0_CLKCTRL, NULL, CLKF_SW_SUP, "l4_root_clk_div" },
+ { DRA7_L4PER2_QSPI_CLKCTRL, dra7_qspi_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:012c:25" },
+ { DRA7_L4PER2_MCASP2_CLKCTRL, dra7_mcasp2_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:0154:22" },
+ { DRA7_L4PER2_MCASP3_CLKCTRL, dra7_mcasp3_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:015c:22" },
+ { DRA7_L4PER2_MCASP5_CLKCTRL, dra7_mcasp5_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:016c:22" },
+ { DRA7_L4PER2_MCASP8_CLKCTRL, dra7_mcasp8_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:0184:24" },
+ { DRA7_L4PER2_MCASP4_CLKCTRL, dra7_mcasp4_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:018c:22" },
+ { DRA7_L4PER2_UART7_CLKCTRL, dra7_uart7_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:01c4:24" },
+ { DRA7_L4PER2_UART8_CLKCTRL, dra7_uart8_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:01d4:24" },
+ { DRA7_L4PER2_UART9_CLKCTRL, dra7_uart9_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:01dc:24" },
+ { DRA7_L4PER2_DCAN2_CLKCTRL, NULL, CLKF_SW_SUP, "sys_clkin1" },
+ { DRA7_L4PER2_MCASP6_CLKCTRL, dra7_mcasp6_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:01f8:22" },
+ { DRA7_L4PER2_MCASP7_CLKCTRL, dra7_mcasp7_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:01fc:22" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_timer13_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_timer14_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_timer15_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_timer16_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_l4per3_clkctrl_regs[] __initconst = {
+ { DRA7_L4PER3_L4_PER3_CLKCTRL, NULL, 0, "l3_iclk_div" },
+ { DRA7_L4PER3_TIMER13_CLKCTRL, dra7_timer13_bit_data, CLKF_SW_SUP, "l4per3-clkctrl:00b4:24" },
+ { DRA7_L4PER3_TIMER14_CLKCTRL, dra7_timer14_bit_data, CLKF_SW_SUP, "l4per3-clkctrl:00bc:24" },
+ { DRA7_L4PER3_TIMER15_CLKCTRL, dra7_timer15_bit_data, CLKF_SW_SUP, "l4per3-clkctrl:00c4:24" },
+ { DRA7_L4PER3_TIMER16_CLKCTRL, dra7_timer16_bit_data, CLKF_SW_SUP, "l4per3-clkctrl:011c:24" },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_gpio1_bit_data[] __initconst = {
+ { 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_timer1_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_bit_data dra7_uart10_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
+ { 0 },
+};
+
+static const char * const dra7_dcan1_sys_clk_mux_parents[] __initconst = {
+ "sys_clkin1",
+ "sys_clkin2",
+ NULL,
+};
+
+static const struct omap_clkctrl_bit_data dra7_dcan1_bit_data[] __initconst = {
+ { 24, TI_CLK_MUX, dra7_dcan1_sys_clk_mux_parents, NULL },
+ { 0 },
+};
+
+static const struct omap_clkctrl_reg_data dra7_wkupaon_clkctrl_regs[] __initconst = {
+ { DRA7_WKUPAON_L4_WKUP_CLKCTRL, NULL, 0, "wkupaon_iclk_mux" },
+ { DRA7_WKUPAON_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" },
+ { DRA7_WKUPAON_GPIO1_CLKCTRL, dra7_gpio1_bit_data, CLKF_HW_SUP, "wkupaon_iclk_mux" },
+ { DRA7_WKUPAON_TIMER1_CLKCTRL, dra7_timer1_bit_data, CLKF_SW_SUP, "wkupaon-clkctrl:0020:24" },
+ { DRA7_WKUPAON_TIMER12_CLKCTRL, NULL, 0, "secure_32k_clk_src_ck" },
+ { DRA7_WKUPAON_COUNTER_32K_CLKCTRL, NULL, 0, "wkupaon_iclk_mux" },
+ { DRA7_WKUPAON_UART10_CLKCTRL, dra7_uart10_bit_data, CLKF_SW_SUP, "wkupaon-clkctrl:0060:24" },
+ { DRA7_WKUPAON_DCAN1_CLKCTRL, dra7_dcan1_bit_data, CLKF_SW_SUP, "wkupaon-clkctrl:0068:24" },
+ { DRA7_WKUPAON_ADC_CLKCTRL, NULL, CLKF_SW_SUP, "mcan_clk" },
+ { 0 },
+};
+
+const struct omap_clkctrl_data dra7_clkctrl_data[] __initconst = {
+ { 0x4a005320, dra7_mpu_clkctrl_regs },
+ { 0x4a005420, dra7_dsp1_clkctrl_regs },
+ { 0x4a005520, dra7_ipu1_clkctrl_regs },
+ { 0x4a005550, dra7_ipu_clkctrl_regs },
+ { 0x4a005620, dra7_dsp2_clkctrl_regs },
+ { 0x4a005720, dra7_rtc_clkctrl_regs },
+ { 0x4a008620, dra7_coreaon_clkctrl_regs },
+ { 0x4a008720, dra7_l3main1_clkctrl_regs },
+ { 0x4a008920, dra7_ipu2_clkctrl_regs },
+ { 0x4a008a20, dra7_dma_clkctrl_regs },
+ { 0x4a008b20, dra7_emif_clkctrl_regs },
+ { 0x4a008c00, dra7_atl_clkctrl_regs },
+ { 0x4a008d20, dra7_l4cfg_clkctrl_regs },
+ { 0x4a008e20, dra7_l3instr_clkctrl_regs },
+ { 0x4a009120, dra7_dss_clkctrl_regs },
+ { 0x4a009320, dra7_l3init_clkctrl_regs },
+ { 0x4a0093b0, dra7_pcie_clkctrl_regs },
+ { 0x4a0093d0, dra7_gmac_clkctrl_regs },
+ { 0x4a009728, dra7_l4per_clkctrl_regs },
+ { 0x4a0098a0, dra7_l4sec_clkctrl_regs },
+ { 0x4a00970c, dra7_l4per2_clkctrl_regs },
+ { 0x4a009714, dra7_l4per3_clkctrl_regs },
+ { 0x4ae07820, dra7_wkupaon_clkctrl_regs },
+ { 0 },
+};
+
+static struct ti_dt_clk dra7xx_clks[] = {
+ DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
+ DT_CLK(NULL, "sys_clkin_ck", "timer_sys_clk_div"),
+ DT_CLK(NULL, "sys_clkin", "sys_clkin1"),
+ DT_CLK(NULL, "atl_dpll_clk_mux", "atl-clkctrl:0000:24"),
+ DT_CLK(NULL, "atl_gfclk_mux", "atl-clkctrl:0000:26"),
+ DT_CLK(NULL, "dcan1_sys_clk_mux", "wkupaon-clkctrl:0068:24"),
+ DT_CLK(NULL, "dss_32khz_clk", "dss-clkctrl:0000:11"),
+ DT_CLK(NULL, "dss_48mhz_clk", "dss-clkctrl:0000:9"),
+ DT_CLK(NULL, "dss_dss_clk", "dss-clkctrl:0000:8"),
+ DT_CLK(NULL, "dss_hdmi_clk", "dss-clkctrl:0000:10"),
+ DT_CLK(NULL, "dss_video1_clk", "dss-clkctrl:0000:12"),
+ DT_CLK(NULL, "dss_video2_clk", "dss-clkctrl:0000:13"),
+ DT_CLK(NULL, "gmac_rft_clk_mux", "gmac-clkctrl:0000:25"),
+ DT_CLK(NULL, "gpio1_dbclk", "wkupaon-clkctrl:0018:8"),
+ DT_CLK(NULL, "gpio2_dbclk", "l4per-clkctrl:0038:8"),
+ DT_CLK(NULL, "gpio3_dbclk", "l4per-clkctrl:0040:8"),
+ DT_CLK(NULL, "gpio4_dbclk", "l4per-clkctrl:0048:8"),
+ DT_CLK(NULL, "gpio5_dbclk", "l4per-clkctrl:0050:8"),
+ DT_CLK(NULL, "gpio6_dbclk", "l4per-clkctrl:0058:8"),
+ DT_CLK(NULL, "gpio7_dbclk", "l4per-clkctrl:00e8:8"),
+ DT_CLK(NULL, "gpio8_dbclk", "l4per-clkctrl:00f0:8"),
+ DT_CLK(NULL, "ipu1_gfclk_mux", "ipu1-clkctrl:0000:24"),
+ DT_CLK(NULL, "mcasp1_ahclkr_mux", "ipu-clkctrl:0000:28"),
+ DT_CLK(NULL, "mcasp1_ahclkx_mux", "ipu-clkctrl:0000:24"),
+ DT_CLK(NULL, "mcasp1_aux_gfclk_mux", "ipu-clkctrl:0000:22"),
+ DT_CLK(NULL, "mcasp2_ahclkr_mux", "l4per2-clkctrl:0154:28"),
+ DT_CLK(NULL, "mcasp2_ahclkx_mux", "l4per2-clkctrl:0154:24"),
+ DT_CLK(NULL, "mcasp2_aux_gfclk_mux", "l4per2-clkctrl:0154:22"),
+ DT_CLK(NULL, "mcasp3_ahclkx_mux", "l4per2-clkctrl:015c:24"),
+ DT_CLK(NULL, "mcasp3_aux_gfclk_mux", "l4per2-clkctrl:015c:22"),
+ DT_CLK(NULL, "mcasp4_ahclkx_mux", "l4per2-clkctrl:018c:24"),
+ DT_CLK(NULL, "mcasp4_aux_gfclk_mux", "l4per2-clkctrl:018c:22"),
+ DT_CLK(NULL, "mcasp5_ahclkx_mux", "l4per2-clkctrl:016c:24"),
+ DT_CLK(NULL, "mcasp5_aux_gfclk_mux", "l4per2-clkctrl:016c:22"),
+ DT_CLK(NULL, "mcasp6_ahclkx_mux", "l4per2-clkctrl:01f8:24"),
+ DT_CLK(NULL, "mcasp6_aux_gfclk_mux", "l4per2-clkctrl:01f8:22"),
+ DT_CLK(NULL, "mcasp7_ahclkx_mux", "l4per2-clkctrl:01fc:24"),
+ DT_CLK(NULL, "mcasp7_aux_gfclk_mux", "l4per2-clkctrl:01fc:22"),
+ DT_CLK(NULL, "mcasp8_ahclkx_mux", "l4per2-clkctrl:0184:22"),
+ DT_CLK(NULL, "mcasp8_aux_gfclk_mux", "l4per2-clkctrl:0184:24"),
+ DT_CLK(NULL, "mmc1_clk32k", "l3init-clkctrl:0008:8"),
+ DT_CLK(NULL, "mmc1_fclk_div", "l3init-clkctrl:0008:25"),
+ DT_CLK(NULL, "mmc1_fclk_mux", "l3init-clkctrl:0008:24"),
+ DT_CLK(NULL, "mmc2_clk32k", "l3init-clkctrl:0010:8"),
+ DT_CLK(NULL, "mmc2_fclk_div", "l3init-clkctrl:0010:25"),
+ DT_CLK(NULL, "mmc2_fclk_mux", "l3init-clkctrl:0010:24"),
+ DT_CLK(NULL, "mmc3_clk32k", "l4per-clkctrl:00f8:8"),
+ DT_CLK(NULL, "mmc3_gfclk_div", "l4per-clkctrl:00f8:25"),
+ DT_CLK(NULL, "mmc3_gfclk_mux", "l4per-clkctrl:00f8:24"),
+ DT_CLK(NULL, "mmc4_clk32k", "l4per-clkctrl:0100:8"),
+ DT_CLK(NULL, "mmc4_gfclk_div", "l4per-clkctrl:0100:25"),
+ DT_CLK(NULL, "mmc4_gfclk_mux", "l4per-clkctrl:0100:24"),
+ DT_CLK(NULL, "optfclk_pciephy1_32khz", "pcie-clkctrl:0000:8"),
+ DT_CLK(NULL, "optfclk_pciephy1_clk", "pcie-clkctrl:0000:9"),
+ DT_CLK(NULL, "optfclk_pciephy1_div_clk", "pcie-clkctrl:0000:10"),
+ DT_CLK(NULL, "optfclk_pciephy2_32khz", "pcie-clkctrl:0008:8"),
+ DT_CLK(NULL, "optfclk_pciephy2_clk", "pcie-clkctrl:0008:9"),
+ DT_CLK(NULL, "optfclk_pciephy2_div_clk", "pcie-clkctrl:0008:10"),
+ DT_CLK(NULL, "qspi_gfclk_div", "l4per2-clkctrl:012c:25"),
+ DT_CLK(NULL, "qspi_gfclk_mux", "l4per2-clkctrl:012c:24"),
+ DT_CLK(NULL, "rmii_50mhz_clk_mux", "gmac-clkctrl:0000:24"),
+ DT_CLK(NULL, "sata_ref_clk", "l3init-clkctrl:0068:8"),
+ DT_CLK(NULL, "timer10_gfclk_mux", "l4per-clkctrl:0000:24"),
+ DT_CLK(NULL, "timer11_gfclk_mux", "l4per-clkctrl:0008:24"),
+ DT_CLK(NULL, "timer13_gfclk_mux", "l4per3-clkctrl:00b4:24"),
+ DT_CLK(NULL, "timer14_gfclk_mux", "l4per3-clkctrl:00bc:24"),
+ DT_CLK(NULL, "timer15_gfclk_mux", "l4per3-clkctrl:00c4:24"),
+ DT_CLK(NULL, "timer16_gfclk_mux", "l4per3-clkctrl:011c:24"),
+ DT_CLK(NULL, "timer1_gfclk_mux", "wkupaon-clkctrl:0020:24"),
+ DT_CLK(NULL, "timer2_gfclk_mux", "l4per-clkctrl:0010:24"),
+ DT_CLK(NULL, "timer3_gfclk_mux", "l4per-clkctrl:0018:24"),
+ DT_CLK(NULL, "timer4_gfclk_mux", "l4per-clkctrl:0020:24"),
+ DT_CLK(NULL, "timer5_gfclk_mux", "ipu-clkctrl:0008:24"),
+ DT_CLK(NULL, "timer6_gfclk_mux", "ipu-clkctrl:0010:24"),
+ DT_CLK(NULL, "timer7_gfclk_mux", "ipu-clkctrl:0018:24"),
+ DT_CLK(NULL, "timer8_gfclk_mux", "ipu-clkctrl:0020:24"),
+ DT_CLK(NULL, "timer9_gfclk_mux", "l4per-clkctrl:0028:24"),
+ DT_CLK(NULL, "uart10_gfclk_mux", "wkupaon-clkctrl:0060:24"),
+ DT_CLK(NULL, "uart1_gfclk_mux", "l4per-clkctrl:0118:24"),
+ DT_CLK(NULL, "uart2_gfclk_mux", "l4per-clkctrl:0120:24"),
+ DT_CLK(NULL, "uart3_gfclk_mux", "l4per-clkctrl:0128:24"),
+ DT_CLK(NULL, "uart4_gfclk_mux", "l4per-clkctrl:0130:24"),
+ DT_CLK(NULL, "uart5_gfclk_mux", "l4per-clkctrl:0148:24"),
+ DT_CLK(NULL, "uart6_gfclk_mux", "ipu-clkctrl:0030:24"),
+ DT_CLK(NULL, "uart7_gfclk_mux", "l4per2-clkctrl:01c4:24"),
+ DT_CLK(NULL, "uart8_gfclk_mux", "l4per2-clkctrl:01d4:24"),
+ DT_CLK(NULL, "uart9_gfclk_mux", "l4per2-clkctrl:01dc:24"),
+ DT_CLK(NULL, "usb_otg_ss1_refclk960m", "l3init-clkctrl:00d0:8"),
+ DT_CLK(NULL, "usb_otg_ss2_refclk960m", "l3init-clkctrl:0020:8"),
+ { .node_name = NULL },
+};
+
int __init dra7xx_dt_clk_init(void)
{
int rc;
struct clk *dpll_ck, *hdcp_ck;
- ti_dt_clocks_register(dra7xx_compat_clks);
+ if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
+ ti_dt_clocks_register(dra7xx_compat_clks);
+ else
+ ti_dt_clocks_register(dra7xx_clks);
omap2_clk_disable_autoidle_all();
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 2e42556..69dfa21 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -463,8 +463,12 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
data = omap5_clkctrl_data;
#endif
#ifdef CONFIG_SOC_DRA7XX
- if (of_machine_is_compatible("ti,dra7"))
- data = dra7_clkctrl_compat_data;
+ if (of_machine_is_compatible("ti,dra7")) {
+ if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
+ data = dra7_clkctrl_compat_data;
+ else
+ data = dra7_clkctrl_data;
+ }
#endif
#ifdef CONFIG_SOC_AM33XX
if (of_machine_is_compatible("ti,am33xx")) {
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index c729f87..5a78106 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -183,6 +183,7 @@ struct omap_clkctrl_data {
extern const struct omap_clkctrl_data omap4_clkctrl_data[];
extern const struct omap_clkctrl_data omap5_clkctrl_data[];
+extern const struct omap_clkctrl_data dra7_clkctrl_data[];
extern const struct omap_clkctrl_data dra7_clkctrl_compat_data[];
extern struct ti_dt_clk dra7xx_compat_clks[];
extern const struct omap_clkctrl_data am3_clkctrl_data[];
--
1.9.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries
2018-08-31 15:06 [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries Tero Kristo
` (10 preceding siblings ...)
2018-08-31 15:07 ` [PATCH 11/11] clk: ti: dra7: add new clkctrl data Tero Kristo
@ 2018-09-04 15:36 ` Tony Lindgren
2018-09-26 19:13 ` Tony Lindgren
11 siblings, 1 reply; 27+ messages in thread
From: Tony Lindgren @ 2018-09-04 15:36 UTC (permalink / raw)
To: Tero Kristo; +Cc: linux-clk, sboyd, mturquette, linux-omap
* Tero Kristo <t-kristo@ti.com> [180831 15:11]:
> Hi,
>
> This series splits up the clkctrl data for TI SoCs based on clockdomain
> boundaries, instead of the current CM boundaries. For rest of the SoCs,
> the CM boundaries are actually the same as clockdomains, only am3/am4/dra7
> are mutants.
>
> This is done in preparation for better supporting Tony's upcoming
> interconnect driver data introduction for these SoCs.
>
> One thing to note is that we maintain backwards compatibility with this
> series, the compat data is introduced temporarily for this purpose. The
> compat data can be ditched after couple of release cycles when nobody
> needs it anymore.
>
> The series can be applied independently, as the compat data support
> makes care that the switch is only done once DT changes are in place.
When this is ready for merging, can you guys please set up an
immutable branch against v4.19-rc1 with the drivers/clk changes
for me to merge in too?
I've tested this on am335x and am437x so far and it works fine
for me, so for the whole series:
Tested-by: Tony Lindgren <tony@atomide.com>
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries
2018-09-04 15:36 ` [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries Tony Lindgren
@ 2018-09-26 19:13 ` Tony Lindgren
2018-09-26 19:13 ` Tony Lindgren
2018-09-27 6:31 ` Tero Kristo
0 siblings, 2 replies; 27+ messages in thread
From: Tony Lindgren @ 2018-09-26 19:13 UTC (permalink / raw)
To: Tero Kristo; +Cc: linux-clk, sboyd, mturquette, linux-omap
Hi,
* Tony Lindgren <tony@atomide.com> [180904 15:41]:
> * Tero Kristo <t-kristo@ti.com> [180831 15:11]:
> > Hi,
> >
> > This series splits up the clkctrl data for TI SoCs based on clockdomain
> > boundaries, instead of the current CM boundaries. For rest of the SoCs,
> > the CM boundaries are actually the same as clockdomains, only am3/am4/dra7
> > are mutants.
> >
> > This is done in preparation for better supporting Tony's upcoming
> > interconnect driver data introduction for these SoCs.
> >
> > One thing to note is that we maintain backwards compatibility with this
> > series, the compat data is introduced temporarily for this purpose. The
> > compat data can be ditched after couple of release cycles when nobody
> > needs it anymore.
> >
> > The series can be applied independently, as the compat data support
> > makes care that the switch is only done once DT changes are in place.
>
> When this is ready for merging, can you guys please set up an
> immutable branch against v4.19-rc1 with the drivers/clk changes
> for me to merge in too?
>
> I've tested this on am335x and am437x so far and it works fine
> for me, so for the whole series:
>
> Tested-by: Tony Lindgren <tony@atomide.com>
Any news on getting this into Linux next and merged? The
immutable is still needed too for the dts changes.
Regards,
Tony
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries
2018-09-26 19:13 ` Tony Lindgren
@ 2018-09-26 19:13 ` Tony Lindgren
2018-09-27 6:31 ` Tero Kristo
1 sibling, 0 replies; 27+ messages in thread
From: Tony Lindgren @ 2018-09-26 19:13 UTC (permalink / raw)
To: Tero Kristo; +Cc: linux-clk, sboyd, mturquette, linux-omap
Hi,
* Tony Lindgren <tony@atomide.com> [180904 15:41]:
> * Tero Kristo <t-kristo@ti.com> [180831 15:11]:
> > Hi,
> >
> > This series splits up the clkctrl data for TI SoCs based on clockdomain
> > boundaries, instead of the current CM boundaries. For rest of the SoCs,
> > the CM boundaries are actually the same as clockdomains, only am3/am4/dra7
> > are mutants.
> >
> > This is done in preparation for better supporting Tony's upcoming
> > interconnect driver data introduction for these SoCs.
> >
> > One thing to note is that we maintain backwards compatibility with this
> > series, the compat data is introduced temporarily for this purpose. The
> > compat data can be ditched after couple of release cycles when nobody
> > needs it anymore.
> >
> > The series can be applied independently, as the compat data support
> > makes care that the switch is only done once DT changes are in place.
>
> When this is ready for merging, can you guys please set up an
> immutable branch against v4.19-rc1 with the drivers/clk changes
> for me to merge in too?
>
> I've tested this on am335x and am437x so far and it works fine
> for me, so for the whole series:
>
> Tested-by: Tony Lindgren <tony@atomide.com>
Any news on getting this into Linux next and merged? The
immutable is still needed too for the dts changes.
Regards,
Tony
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries
2018-09-26 19:13 ` Tony Lindgren
2018-09-26 19:13 ` Tony Lindgren
@ 2018-09-27 6:31 ` Tero Kristo
2018-09-27 6:31 ` Tero Kristo
2018-09-27 14:49 ` Tony Lindgren
1 sibling, 2 replies; 27+ messages in thread
From: Tero Kristo @ 2018-09-27 6:31 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-clk, sboyd, mturquette, linux-omap
On 26/09/18 22:13, Tony Lindgren wrote:
> Hi,
>
> * Tony Lindgren <tony@atomide.com> [180904 15:41]:
>> * Tero Kristo <t-kristo@ti.com> [180831 15:11]:
>>> Hi,
>>>
>>> This series splits up the clkctrl data for TI SoCs based on clockdomain
>>> boundaries, instead of the current CM boundaries. For rest of the SoCs,
>>> the CM boundaries are actually the same as clockdomains, only am3/am4/dra7
>>> are mutants.
>>>
>>> This is done in preparation for better supporting Tony's upcoming
>>> interconnect driver data introduction for these SoCs.
>>>
>>> One thing to note is that we maintain backwards compatibility with this
>>> series, the compat data is introduced temporarily for this purpose. The
>>> compat data can be ditched after couple of release cycles when nobody
>>> needs it anymore.
>>>
>>> The series can be applied independently, as the compat data support
>>> makes care that the switch is only done once DT changes are in place.
>>
>> When this is ready for merging, can you guys please set up an
>> immutable branch against v4.19-rc1 with the drivers/clk changes
>> for me to merge in too?
>>
>> I've tested this on am335x and am437x so far and it works fine
>> for me, so for the whole series:
>>
>> Tested-by: Tony Lindgren <tony@atomide.com>
>
> Any news on getting this into Linux next and merged? The
> immutable is still needed too for the dts changes.
>
This is currently blocked from my side, as the patch [1] from Johan got
in clk-next is conflicting with my series. Asked Stephen for either
dropping that patch and letting me pick it up but no response so far.
[1] https://lkml.org/lkml/2018/8/22/160
-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries
2018-09-27 6:31 ` Tero Kristo
@ 2018-09-27 6:31 ` Tero Kristo
2018-09-27 14:49 ` Tony Lindgren
1 sibling, 0 replies; 27+ messages in thread
From: Tero Kristo @ 2018-09-27 6:31 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-clk, sboyd, mturquette, linux-omap
On 26/09/18 22:13, Tony Lindgren wrote:
> Hi,
>
> * Tony Lindgren <tony@atomide.com> [180904 15:41]:
>> * Tero Kristo <t-kristo@ti.com> [180831 15:11]:
>>> Hi,
>>>
>>> This series splits up the clkctrl data for TI SoCs based on clockdomain
>>> boundaries, instead of the current CM boundaries. For rest of the SoCs,
>>> the CM boundaries are actually the same as clockdomains, only am3/am4/dra7
>>> are mutants.
>>>
>>> This is done in preparation for better supporting Tony's upcoming
>>> interconnect driver data introduction for these SoCs.
>>>
>>> One thing to note is that we maintain backwards compatibility with this
>>> series, the compat data is introduced temporarily for this purpose. The
>>> compat data can be ditched after couple of release cycles when nobody
>>> needs it anymore.
>>>
>>> The series can be applied independently, as the compat data support
>>> makes care that the switch is only done once DT changes are in place.
>>
>> When this is ready for merging, can you guys please set up an
>> immutable branch against v4.19-rc1 with the drivers/clk changes
>> for me to merge in too?
>>
>> I've tested this on am335x and am437x so far and it works fine
>> for me, so for the whole series:
>>
>> Tested-by: Tony Lindgren <tony@atomide.com>
>
> Any news on getting this into Linux next and merged? The
> immutable is still needed too for the dts changes.
>
This is currently blocked from my side, as the patch [1] from Johan got
in clk-next is conflicting with my series. Asked Stephen for either
dropping that patch and letting me pick it up but no response so far.
[1] https://lkml.org/lkml/2018/8/22/160
-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries
2018-09-27 6:31 ` Tero Kristo
2018-09-27 6:31 ` Tero Kristo
@ 2018-09-27 14:49 ` Tony Lindgren
2018-09-27 14:49 ` Tony Lindgren
2018-10-03 13:17 ` Tero Kristo
1 sibling, 2 replies; 27+ messages in thread
From: Tony Lindgren @ 2018-09-27 14:49 UTC (permalink / raw)
To: Tero Kristo; +Cc: linux-clk, sboyd, mturquette, linux-omap
* Tero Kristo <t-kristo@ti.com> [180927 06:35]:
> On 26/09/18 22:13, Tony Lindgren wrote:
> > Hi,
> >
> > * Tony Lindgren <tony@atomide.com> [180904 15:41]:
> > > * Tero Kristo <t-kristo@ti.com> [180831 15:11]:
> > > > Hi,
> > > >
> > > > This series splits up the clkctrl data for TI SoCs based on clockdomain
> > > > boundaries, instead of the current CM boundaries. For rest of the SoCs,
> > > > the CM boundaries are actually the same as clockdomains, only am3/am4/dra7
> > > > are mutants.
> > > >
> > > > This is done in preparation for better supporting Tony's upcoming
> > > > interconnect driver data introduction for these SoCs.
> > > >
> > > > One thing to note is that we maintain backwards compatibility with this
> > > > series, the compat data is introduced temporarily for this purpose. The
> > > > compat data can be ditched after couple of release cycles when nobody
> > > > needs it anymore.
> > > >
> > > > The series can be applied independently, as the compat data support
> > > > makes care that the switch is only done once DT changes are in place.
> > >
> > > When this is ready for merging, can you guys please set up an
> > > immutable branch against v4.19-rc1 with the drivers/clk changes
> > > for me to merge in too?
> > >
> > > I've tested this on am335x and am437x so far and it works fine
> > > for me, so for the whole series:
> > >
> > > Tested-by: Tony Lindgren <tony@atomide.com>
> >
> > Any news on getting this into Linux next and merged? The
> > immutable is still needed too for the dts changes.
> >
>
> This is currently blocked from my side, as the patch [1] from Johan got in
> clk-next is conflicting with my series. Asked Stephen for either dropping
> that patch and letting me pick it up but no response so far.
>
> [1] https://lkml.org/lkml/2018/8/22/160
Hmm well the idea is to not redo branches. So how about
send Stephen a pull request against Johan's patch commit
00a461cc32ec ("clk: ti: fix OF child-node lookup")?
That is assuming 00a461cc32ec is considered immutable and
OK to use as a base by Stephen? :)
And assuming that your pull request gets merged, and we
all consider that branch immutable too, then I can merge it
in too for the dts changes. It will bring also Rob's
clean-up patch 00a461cc32ec ("clk: ti: fix OF child-node
lookup") too but that's just fine.
Regards,
Tony
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries
2018-09-27 14:49 ` Tony Lindgren
@ 2018-09-27 14:49 ` Tony Lindgren
2018-10-03 13:17 ` Tero Kristo
1 sibling, 0 replies; 27+ messages in thread
From: Tony Lindgren @ 2018-09-27 14:49 UTC (permalink / raw)
To: Tero Kristo; +Cc: linux-clk, sboyd, mturquette, linux-omap
* Tero Kristo <t-kristo@ti.com> [180927 06:35]:
> On 26/09/18 22:13, Tony Lindgren wrote:
> > Hi,
> >
> > * Tony Lindgren <tony@atomide.com> [180904 15:41]:
> > > * Tero Kristo <t-kristo@ti.com> [180831 15:11]:
> > > > Hi,
> > > >
> > > > This series splits up the clkctrl data for TI SoCs based on clockdomain
> > > > boundaries, instead of the current CM boundaries. For rest of the SoCs,
> > > > the CM boundaries are actually the same as clockdomains, only am3/am4/dra7
> > > > are mutants.
> > > >
> > > > This is done in preparation for better supporting Tony's upcoming
> > > > interconnect driver data introduction for these SoCs.
> > > >
> > > > One thing to note is that we maintain backwards compatibility with this
> > > > series, the compat data is introduced temporarily for this purpose. The
> > > > compat data can be ditched after couple of release cycles when nobody
> > > > needs it anymore.
> > > >
> > > > The series can be applied independently, as the compat data support
> > > > makes care that the switch is only done once DT changes are in place.
> > >
> > > When this is ready for merging, can you guys please set up an
> > > immutable branch against v4.19-rc1 with the drivers/clk changes
> > > for me to merge in too?
> > >
> > > I've tested this on am335x and am437x so far and it works fine
> > > for me, so for the whole series:
> > >
> > > Tested-by: Tony Lindgren <tony@atomide.com>
> >
> > Any news on getting this into Linux next and merged? The
> > immutable is still needed too for the dts changes.
> >
>
> This is currently blocked from my side, as the patch [1] from Johan got in
> clk-next is conflicting with my series. Asked Stephen for either dropping
> that patch and letting me pick it up but no response so far.
>
> [1] https://lkml.org/lkml/2018/8/22/160
Hmm well the idea is to not redo branches. So how about
send Stephen a pull request against Johan's patch commit
00a461cc32ec ("clk: ti: fix OF child-node lookup")?
That is assuming 00a461cc32ec is considered immutable and
OK to use as a base by Stephen? :)
And assuming that your pull request gets merged, and we
all consider that branch immutable too, then I can merge it
in too for the dts changes. It will bring also Rob's
clean-up patch 00a461cc32ec ("clk: ti: fix OF child-node
lookup") too but that's just fine.
Regards,
Tony
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries
2018-09-27 14:49 ` Tony Lindgren
2018-09-27 14:49 ` Tony Lindgren
@ 2018-10-03 13:17 ` Tero Kristo
1 sibling, 0 replies; 27+ messages in thread
From: Tero Kristo @ 2018-10-03 13:17 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-clk, sboyd, mturquette, linux-omap
On 27/09/18 17:49, Tony Lindgren wrote:
> * Tero Kristo <t-kristo@ti.com> [180927 06:35]:
>> On 26/09/18 22:13, Tony Lindgren wrote:
>>> Hi,
>>>
>>> * Tony Lindgren <tony@atomide.com> [180904 15:41]:
>>>> * Tero Kristo <t-kristo@ti.com> [180831 15:11]:
>>>>> Hi,
>>>>>
>>>>> This series splits up the clkctrl data for TI SoCs based on clockdomain
>>>>> boundaries, instead of the current CM boundaries. For rest of the SoCs,
>>>>> the CM boundaries are actually the same as clockdomains, only am3/am4/dra7
>>>>> are mutants.
>>>>>
>>>>> This is done in preparation for better supporting Tony's upcoming
>>>>> interconnect driver data introduction for these SoCs.
>>>>>
>>>>> One thing to note is that we maintain backwards compatibility with this
>>>>> series, the compat data is introduced temporarily for this purpose. The
>>>>> compat data can be ditched after couple of release cycles when nobody
>>>>> needs it anymore.
>>>>>
>>>>> The series can be applied independently, as the compat data support
>>>>> makes care that the switch is only done once DT changes are in place.
>>>>
>>>> When this is ready for merging, can you guys please set up an
>>>> immutable branch against v4.19-rc1 with the drivers/clk changes
>>>> for me to merge in too?
>>>>
>>>> I've tested this on am335x and am437x so far and it works fine
>>>> for me, so for the whole series:
>>>>
>>>> Tested-by: Tony Lindgren <tony@atomide.com>
>>>
>>> Any news on getting this into Linux next and merged? The
>>> immutable is still needed too for the dts changes.
>>>
>>
>> This is currently blocked from my side, as the patch [1] from Johan got in
>> clk-next is conflicting with my series. Asked Stephen for either dropping
>> that patch and letting me pick it up but no response so far.
>>
>> [1] https://lkml.org/lkml/2018/8/22/160
>
> Hmm well the idea is to not redo branches. So how about
> send Stephen a pull request against Johan's patch commit
> 00a461cc32ec ("clk: ti: fix OF child-node lookup")?
>
> That is assuming 00a461cc32ec is considered immutable and
> OK to use as a base by Stephen? :)
>
> And assuming that your pull request gets merged, and we
> all consider that branch immutable too, then I can merge it
> in too for the dts changes. It will bring also Rob's
> clean-up patch 00a461cc32ec ("clk: ti: fix OF child-node
> lookup") too but that's just fine.
>
> Regards,
>
> Tony
>
So, finally queued this up towards 4.20, assuming Stephen accepts it.
The immutable branch I have pushed is available here:
https://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux.git/log/?h=clk-ti-clkctrl-sr
It is also tagged in the pull-req I just sent out.
-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
^ permalink raw reply [flat|nested] 27+ messages in thread