linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sowjanya Komatineni <skomatineni@nvidia.com>
To: <thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
	<tglx@linutronix.de>, <jason@lakedaemon.net>,
	<marc.zyngier@arm.com>, <linus.walleij@linaro.org>,
	<stefan@agner.ch>, <mark.rutland@arm.com>
Cc: <pdeschrijver@nvidia.com>, <pgaikwad@nvidia.com>,
	<sboyd@kernel.org>, <linux-clk@vger.kernel.org>,
	<linux-gpio@vger.kernel.org>, <jckuo@nvidia.com>,
	<josephl@nvidia.com>, <talho@nvidia.com>,
	<skomatineni@nvidia.com>, <linux-tegra@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <mperttunen@nvidia.com>,
	<spatra@nvidia.com>, <robh+dt@kernel.org>, <digetx@gmail.com>,
	<devicetree@vger.kernel.org>
Subject: [PATCH V3 11/17] clk: tegra210: support for Tegra210 clocks suspend and resume
Date: Tue, 18 Jun 2019 00:46:25 -0700	[thread overview]
Message-ID: <1560843991-24123-12-git-send-email-skomatineni@nvidia.com> (raw)
In-Reply-To: <1560843991-24123-1-git-send-email-skomatineni@nvidia.com>

This patch adds system suspend and resume support for Tegra210
clocks.

All the CAR controller settings are lost on suspend when core power
goes off.

This patch has implementation for saving and restoring all the PLLs
and clocks context during system suspend and resume to have the
system back to operating state.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 drivers/clk/tegra/clk-tegra210.c | 218 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 211 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index e1ba62d2b1a0..c34d92e871f4 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -9,10 +9,12 @@
 #include <linux/clkdev.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_platform.h>
 #include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/mutex.h>
 #include <linux/clk/tegra.h>
+#include <linux/syscore_ops.h>
 #include <dt-bindings/clock/tegra210-car.h>
 #include <dt-bindings/reset/tegra210-car.h>
 #include <linux/iopoll.h>
@@ -20,6 +22,7 @@
 #include <soc/tegra/pmc.h>
 
 #include "clk.h"
+#include "clk-dfll.h"
 #include "clk-id.h"
 
 /*
@@ -36,6 +39,8 @@
 #define CLK_SOURCE_LA 0x1f8
 #define CLK_SOURCE_SDMMC2 0x154
 #define CLK_SOURCE_SDMMC4 0x164
+#define CLK_OUT_ENB_Y 0x298
+#define CLK_ENB_PLLP_OUT_CPU BIT(31)
 
 #define PLLC_BASE 0x80
 #define PLLC_OUT 0x84
@@ -225,6 +230,7 @@
 
 #define CLK_RST_CONTROLLER_RST_DEV_Y_SET 0x2a8
 #define CLK_RST_CONTROLLER_RST_DEV_Y_CLR 0x2ac
+#define CPU_SOFTRST_CTRL 0x380
 
 #define LVL2_CLK_GATE_OVRA 0xf8
 #define LVL2_CLK_GATE_OVRC 0x3a0
@@ -2820,6 +2826,7 @@ static int tegra210_enable_pllu(void)
 	struct tegra_clk_pll_freq_table *fentry;
 	struct tegra_clk_pll pllu;
 	u32 reg;
+	int ret;
 
 	for (fentry = pll_u_freq_table; fentry->input_rate; fentry++) {
 		if (fentry->input_rate == pll_ref_freq)
@@ -2836,7 +2843,7 @@ static int tegra210_enable_pllu(void)
 	reg = readl_relaxed(clk_base + pllu.params->ext_misc_reg[0]);
 	reg &= ~BIT(pllu.params->iddq_bit_idx);
 	writel_relaxed(reg, clk_base + pllu.params->ext_misc_reg[0]);
-	udelay(5);
+	fence_udelay(5, clk_base);
 
 	reg = readl_relaxed(clk_base + PLLU_BASE);
 	reg &= ~GENMASK(20, 0);
@@ -2844,13 +2851,13 @@ static int tegra210_enable_pllu(void)
 	reg |= fentry->n << 8;
 	reg |= fentry->p << 16;
 	writel(reg, clk_base + PLLU_BASE);
-	udelay(1);
+	fence_udelay(1, clk_base);
 	reg |= PLL_ENABLE;
 	writel(reg, clk_base + PLLU_BASE);
+	fence_udelay(1, clk_base);
 
-	readl_relaxed_poll_timeout_atomic(clk_base + PLLU_BASE, reg,
-					  reg & PLL_BASE_LOCK, 2, 1000);
-	if (!(reg & PLL_BASE_LOCK)) {
+	ret = tegra210_wait_for_mask(&pllu, PLLU_BASE, PLL_BASE_LOCK);
+	if (ret) {
 		pr_err("Timed out waiting for PLL_U to lock\n");
 		return -ETIMEDOUT;
 	}
@@ -2890,12 +2897,12 @@ static int tegra210_init_pllu(void)
 		reg = readl_relaxed(clk_base + XUSB_PLL_CFG0);
 		reg &= ~XUSB_PLL_CFG0_PLLU_LOCK_DLY_MASK;
 		writel_relaxed(reg, clk_base + XUSB_PLL_CFG0);
-		udelay(1);
+		fence_udelay(1, clk_base);
 
 		reg = readl_relaxed(clk_base + PLLU_HW_PWRDN_CFG0);
 		reg |= PLLU_HW_PWRDN_CFG0_SEQ_ENABLE;
 		writel_relaxed(reg, clk_base + PLLU_HW_PWRDN_CFG0);
-		udelay(1);
+		fence_udelay(1, clk_base);
 
 		reg = readl_relaxed(clk_base + PLLU_BASE);
 		reg &= ~PLLU_BASE_CLKENABLE_USB;
@@ -3282,6 +3289,188 @@ static void tegra210_disable_cpu_clock(u32 cpu)
 }
 
 #ifdef CONFIG_PM_SLEEP
+static u32 cpu_softrst_ctx[3];
+static struct platform_device *dfll_pdev;
+static u32 *periph_clk_src_ctx;
+struct periph_source_bank {
+	u32 start;
+	u32 end;
+};
+
+static struct periph_source_bank periph_srcs[] = {
+	[0] = {
+		.start = 0x100,
+		.end = 0x198,
+	},
+	[1] = {
+		.start = 0x1a0,
+		.end = 0x1f8,
+	},
+	[2] = {
+		.start = 0x3b4,
+		.end = 0x42c,
+	},
+	[3] = {
+		.start = 0x49c,
+		.end = 0x4b4,
+	},
+	[4] = {
+		.start = 0x560,
+		.end = 0x564,
+	},
+	[5] = {
+		.start = 0x600,
+		.end = 0x678,
+	},
+	[6] = {
+		.start = 0x694,
+		.end = 0x6a0,
+	},
+	[7] = {
+		.start = 0x6b8,
+		.end = 0x718,
+	},
+};
+
+/* This array lists the valid clocks for each periph clk bank */
+static u32 periph_clks_on[] = {
+	0xdcd7dff9,
+	0x87d1f3e7,
+	0xf3fed3fa,
+	0xffc18cfb,
+	0x793fb7ff,
+	0x3fe66fff,
+	0xfc1fc7ff,
+};
+
+static struct platform_device *dfll_pdev;
+#define car_readl(_base, _off) readl_relaxed(clk_base + (_base) + ((_off) * 4))
+#define car_writel(_val, _base, _off) \
+		writel_relaxed(_val, clk_base + (_base) + ((_off) * 4))
+
+static u32 * __init tegra210_init_suspend_ctx(void)
+{
+	int i, size = 0;
+
+	for (i = 0; i < ARRAY_SIZE(periph_srcs); i++)
+		size += periph_srcs[i].end - periph_srcs[i].start + 4;
+
+	periph_clk_src_ctx = kmalloc(size, GFP_KERNEL);
+
+	return periph_clk_src_ctx;
+}
+
+static int tegra210_clk_suspend(void)
+{
+	int i;
+	unsigned long off;
+	struct device_node *node;
+	u32 *clk_rst_ctx = periph_clk_src_ctx;
+	u32 val;
+
+	tegra_cclkg_burst_policy_save_context();
+
+	if (!dfll_pdev) {
+		node = of_find_compatible_node(NULL, NULL,
+					       "nvidia,tegra210-dfll");
+		if (node)
+			dfll_pdev = of_find_device_by_node(node);
+		of_node_put(node);
+		if (!dfll_pdev)
+			pr_err("dfll node not found. no suspend for dfll\n");
+	}
+
+	if (dfll_pdev)
+		tegra_dfll_suspend(dfll_pdev);
+
+	/* Enable PLLP_OUT_CPU after dfll suspend */
+	val = car_readl(CLK_OUT_ENB_Y, 0);
+	val |= CLK_ENB_PLLP_OUT_CPU;
+	car_writel(val, CLK_OUT_ENB_Y, 0);
+
+	tegra_clk_periph_suspend(clk_base);
+
+	for (i = 0; i < ARRAY_SIZE(periph_srcs); i++)
+		for (off = periph_srcs[i].start; off <= periph_srcs[i].end;
+		     off += 4)
+			*clk_rst_ctx++ = car_readl(off, 0);
+
+	tegra_sclk_cclklp_burst_policy_save_context();
+
+	for (i = 0; i < ARRAY_SIZE(cpu_softrst_ctx); i++)
+		cpu_softrst_ctx[i] = car_readl(CPU_SOFTRST_CTRL, i);
+
+	clk_save_context();
+
+	return 0;
+}
+
+static void tegra210_clk_resume(void)
+{
+	int i;
+	unsigned long off;
+	u32 val;
+	u32 *clk_rst_ctx = periph_clk_src_ctx;
+	struct clk_hw *parent;
+	struct clk *clk;
+
+	for (i = 0; i < ARRAY_SIZE(cpu_softrst_ctx); i++)
+		car_writel(cpu_softrst_ctx[i], CPU_SOFTRST_CTRL, i);
+
+	tegra_clk_osc_resume(clk_base);
+
+	/*
+	 * restore all the plls before configuring clocks and resetting
+	 * the devices.
+	 */
+	tegra210_init_pllu();
+	tegra_sclk_cpulp_burst_policy_restore_context();
+	clk_restore_context();
+
+	/* enable all clocks before configuring clock sources */
+	tegra_clk_periph_force_on(periph_clks_on, ARRAY_SIZE(periph_clks_on),
+				  clk_base);
+	/* wait for all writes to happen to have all the clocks enabled */
+	wmb();
+	fence_udelay(2, clk_base);
+
+	/* restore all the devices clock sources */
+	for (i = 0; i < ARRAY_SIZE(periph_srcs); i++)
+		for (off = periph_srcs[i].start; off <= periph_srcs[i].end;
+		     off += 4)
+			car_writel(*clk_rst_ctx++, off, 0);
+
+	/* propagate and restore resets, restore clock state */
+	fence_udelay(5, clk_base);
+	tegra_clk_periph_resume(clk_base);
+
+	/*
+	 * restore CPUG clocks:
+	 * - enable DFLL in open loop mode
+	 * - switch CPUG to DFLL clock source
+	 * - close DFLL loop
+	 * - sync PLLX state
+	 */
+	if (dfll_pdev)
+		tegra_dfll_resume(dfll_pdev, false);
+
+	tegra_cclkg_burst_policy_restore_context();
+	fence_udelay(2, clk_base);
+
+	if (dfll_pdev)
+		tegra_dfll_resume(dfll_pdev, true);
+
+	parent = clk_hw_get_parent(__clk_get_hw(clks[TEGRA210_CLK_CCLK_G]));
+	clk = clks[TEGRA210_CLK_PLL_X];
+	if (parent != __clk_get_hw(clk))
+		tegra_clk_sync_state_pll(__clk_get_hw(clk));
+
+	/* Disable PLL_OUT_CPU after DFLL resume */
+	val = car_readl(CLK_OUT_ENB_Y, 0);
+	val &= ~CLK_ENB_PLLP_OUT_CPU;
+	car_writel(val, CLK_OUT_ENB_Y, 0);
+}
+
 static void tegra210_cpu_clock_suspend(void)
 {
 	/* switch coresite to clk_m, save off original source */
@@ -3295,8 +3484,20 @@ static void tegra210_cpu_clock_resume(void)
 	writel(tegra210_cpu_clk_sctx.clk_csite_src,
 				clk_base + CLK_SOURCE_CSITE);
 }
+#else
+#define tegra210_clk_suspend	NULL
+#define tegra210_clk_resume	NULL
+static inline u32 *tegra210_init_suspend_ctx(void)
+{
+	return NULL;
+}
 #endif
 
+static struct syscore_ops tegra_clk_syscore_ops = {
+	.suspend = tegra210_clk_suspend,
+	.resume = tegra210_clk_resume,
+};
+
 static struct tegra_cpu_car_ops tegra210_cpu_car_ops = {
 	.wait_for_reset	= tegra210_wait_cpu_in_reset,
 	.disable_clock	= tegra210_disable_cpu_clock,
@@ -3580,5 +3781,8 @@ static void __init tegra210_clock_init(struct device_node *np)
 	tegra210_mbist_clk_init();
 
 	tegra_cpu_car_ops = &tegra210_cpu_car_ops;
+
+	if (tegra210_init_suspend_ctx())
+		register_syscore_ops(&tegra_clk_syscore_ops);
 }
 CLK_OF_DECLARE(tegra210, "nvidia,tegra210-car", tegra210_clock_init);
-- 
2.7.4


  parent reply	other threads:[~2019-06-18  7:47 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-18  7:46 [PATCH V3 00/17] SC7 entry and exit support for Tegra210 Sowjanya Komatineni
2019-06-18  7:46 ` [PATCH V3 01/17] irqchip: tegra: do not disable COP IRQ during suspend Sowjanya Komatineni
2019-06-18  9:19   ` Marc Zyngier
2019-06-18 10:58   ` Thierry Reding
2019-06-18  7:46 ` [PATCH V3 02/17] pinctrl: tegra: add suspend and resume support Sowjanya Komatineni
2019-06-18  9:22   ` Dmitry Osipenko
2019-06-18  9:30     ` Dmitry Osipenko
2019-06-18 15:41       ` Stephen Warren
2019-06-18 16:50         ` Sowjanya Komatineni
2019-06-18 17:34           ` Sowjanya Komatineni
2019-06-18 20:00             ` Dmitry Osipenko
2019-06-18 20:04               ` Sowjanya Komatineni
2019-06-19  8:31               ` Thierry Reding
2019-06-19  8:40                 ` Dmitry Osipenko
2019-06-19  8:33         ` Thierry Reding
2019-06-19  8:57           ` Thierry Reding
2019-06-18 11:31   ` Thierry Reding
2019-06-18  7:46 ` [PATCH V3 03/17] gpio: tegra: use resume_noirq for tegra gpio resume Sowjanya Komatineni
2019-06-18 11:39   ` Thierry Reding
2019-06-18  7:46 ` [PATCH V3 04/17] clk: tegra: save and restore divider rate Sowjanya Komatineni
2019-06-18 11:40   ` Thierry Reding
2019-06-18  7:46 ` [PATCH V3 05/17] clk: tegra: pllout: save and restore pllout context Sowjanya Komatineni
2019-06-18 11:41   ` Thierry Reding
2019-06-18  7:46 ` [PATCH V3 06/17] clk: tegra: pll: save and restore pll context Sowjanya Komatineni
2019-06-18 11:45   ` Thierry Reding
2019-06-25 20:46   ` Stephen Boyd
2019-06-25 21:22     ` Sowjanya Komatineni
2019-06-18  7:46 ` [PATCH V3 07/17] clk: tegra: save and restore CPU and System clocks context Sowjanya Komatineni
2019-06-18 11:48   ` Thierry Reding
2019-06-18  7:46 ` [PATCH V3 08/17] clk: tegra: add support for peripheral clock suspend and resume Sowjanya Komatineni
2019-06-18 11:50   ` Thierry Reding
2019-06-18  7:46 ` [PATCH V3 09/17] clk: tegra: support for saving and restoring OSC clock context Sowjanya Komatineni
2019-06-18 11:51   ` Thierry Reding
2019-06-18  7:46 ` [PATCH V3 10/17] clk: tegra: add suspend resume support for DFLL Sowjanya Komatineni
2019-06-18 11:59   ` Thierry Reding
2019-06-18  7:46 ` Sowjanya Komatineni [this message]
2019-06-18 12:16   ` [PATCH V3 11/17] clk: tegra210: support for Tegra210 clocks suspend and resume Thierry Reding
2019-06-18 17:58     ` Sowjanya Komatineni
2019-06-19  8:15       ` Thierry Reding
2019-06-21 20:44         ` Sowjanya Komatineni
2019-06-18  7:46 ` [PATCH V3 12/17] soc/tegra: pmc: allow support for more tegra wake Sowjanya Komatineni
2019-06-18  9:26   ` Marc Zyngier
2019-06-18  7:46 ` [PATCH V3 13/17] soc/tegra: pmc: add pmc wake support for tegra210 Sowjanya Komatineni
2019-06-18  7:46 ` [PATCH V3 14/17] arm64: tegra: enable wake from deep sleep on RTC alarm Sowjanya Komatineni
2019-06-18  7:46 ` [PATCH V3 15/17] soc/tegra: pmc: configure core power request polarity Sowjanya Komatineni
2019-06-18  7:46 ` [PATCH V3 16/17] soc/tegra: pmc: configure deep sleep control settings Sowjanya Komatineni
2019-06-18  7:46 ` [PATCH V3 17/17] arm64: dts: tegra210-p2180: Jetson TX1 SC7 timings Sowjanya Komatineni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1560843991-24123-12-git-send-email-skomatineni@nvidia.com \
    --to=skomatineni@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=digetx@gmail.com \
    --cc=jason@lakedaemon.net \
    --cc=jckuo@nvidia.com \
    --cc=jonathanh@nvidia.com \
    --cc=josephl@nvidia.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=mperttunen@nvidia.com \
    --cc=pdeschrijver@nvidia.com \
    --cc=pgaikwad@nvidia.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=spatra@nvidia.com \
    --cc=stefan@agner.ch \
    --cc=talho@nvidia.com \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).