* [PATCH 1/9] dt-bindings: clock: Convert i.MX5 clock to json-schema
2020-05-28 7:27 [PATCH 0/9] Convert i.MX legacy platforms clock binding to json-schema Anson Huang
@ 2020-05-28 7:27 ` Anson Huang
2020-05-29 2:45 ` Rob Herring
2020-05-28 7:27 ` [PATCH 2/9] dt-bindings: clock: Convert i.MX35 " Anson Huang
` (7 subsequent siblings)
8 siblings, 1 reply; 19+ messages in thread
From: Anson Huang @ 2020-05-28 7:27 UTC (permalink / raw)
To: mturquette, sboyd, robh+dt, shawnguo, s.hauer, kernel, festevam,
shc_work, s.trumtrar, linux-clk, devicetree, linux-arm-kernel,
linux-kernel
Cc: Linux-imx
Convert the i.MX5 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
.../devicetree/bindings/clock/imx5-clock.txt | 28 ----------
.../devicetree/bindings/clock/imx5-clock.yaml | 63 ++++++++++++++++++++++
2 files changed, 63 insertions(+), 28 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx5-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx5-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt
deleted file mode 100644
index a24ca9e..0000000
--- a/Documentation/devicetree/bindings/clock/imx5-clock.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Clock bindings for Freescale i.MX5
-
-Required properties:
-- compatible: Should be "fsl,<soc>-ccm" , where <soc> can be imx51 or imx53
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
-for the full list of i.MX5 clock IDs.
-
-Examples (for mx53):
-
-clks: ccm@53fd4000{
- compatible = "fsl,imx53-ccm";
- reg = <0x53fd4000 0x4000>;
- interrupts = <0 71 0x04 0 72 0x04>;
- #clock-cells = <1>;
-};
-
-can1: can@53fc8000 {
- compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
- reg = <0x53fc8000 0x4000>;
- interrupts = <82>;
- clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
- clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
new file mode 100644
index 0000000..e4c405c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx5-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX5
+
+maintainers:
+ - Fabio Estevam <fabio.estevam@freescale.com>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
+ for the full list of i.MX5 clock IDs.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx53-ccm
+ - fsl,imx51-ccm
+ - fsl,imx50-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for frequency or mux change, request 2 is to generate
+ interrupt for oscillator read or PLL lock.
+ items:
+ - description: CCM interrupt request 1
+ - description: CCM interrupt request 2
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx5-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@53fd4000{
+ compatible = "fsl,imx53-ccm";
+ reg = <0x53fd4000 0x4000>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
+ <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ };
+
+ can@53fc8000 {
+ compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fc8000 0x4000>;
+ interrupts = <82>;
+ clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+ clock-names = "ipg", "per";
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 1/9] dt-bindings: clock: Convert i.MX5 clock to json-schema
2020-05-28 7:27 ` [PATCH 1/9] dt-bindings: clock: Convert i.MX5 clock " Anson Huang
@ 2020-05-29 2:45 ` Rob Herring
0 siblings, 0 replies; 19+ messages in thread
From: Rob Herring @ 2020-05-29 2:45 UTC (permalink / raw)
To: Anson Huang
Cc: linux-arm-kernel, kernel, shawnguo, shc_work, devicetree,
mturquette, sboyd, festevam, linux-clk, linux-kernel, robh+dt,
Linux-imx, s.trumtrar, s.hauer
On Thu, 28 May 2020 15:27:51 +0800, Anson Huang wrote:
> Convert the i.MX5 clock binding to DT schema format using json-schema.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> .../devicetree/bindings/clock/imx5-clock.txt | 28 ----------
> .../devicetree/bindings/clock/imx5-clock.yaml | 63 ++++++++++++++++++++++
> 2 files changed, 63 insertions(+), 28 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/imx5-clock.txt
> create mode 100644 Documentation/devicetree/bindings/clock/imx5-clock.yaml
>
Applied, thanks!
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 2/9] dt-bindings: clock: Convert i.MX35 clock to json-schema
2020-05-28 7:27 [PATCH 0/9] Convert i.MX legacy platforms clock binding to json-schema Anson Huang
2020-05-28 7:27 ` [PATCH 1/9] dt-bindings: clock: Convert i.MX5 clock " Anson Huang
@ 2020-05-28 7:27 ` Anson Huang
2020-05-29 2:48 ` Rob Herring
2020-05-28 7:27 ` [PATCH 3/9] dt-bindings: clock: Convert i.MX31 " Anson Huang
` (6 subsequent siblings)
8 siblings, 1 reply; 19+ messages in thread
From: Anson Huang @ 2020-05-28 7:27 UTC (permalink / raw)
To: mturquette, sboyd, robh+dt, shawnguo, s.hauer, kernel, festevam,
shc_work, s.trumtrar, linux-clk, devicetree, linux-arm-kernel,
linux-kernel
Cc: Linux-imx
Convert the i.MX35 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
.../devicetree/bindings/clock/imx35-clock.txt | 114 -----------------
.../devicetree/bindings/clock/imx35-clock.yaml | 137 +++++++++++++++++++++
2 files changed, 137 insertions(+), 114 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx35-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx35-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.txt b/Documentation/devicetree/bindings/clock/imx35-clock.txt
deleted file mode 100644
index f497832..0000000
--- a/Documentation/devicetree/bindings/clock/imx35-clock.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-* Clock bindings for Freescale i.MX35
-
-Required properties:
-- compatible: Should be "fsl,imx35-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX35
-clocks and IDs.
-
- Clock ID
- ---------------------------
- ckih 0
- mpll 1
- ppll 2
- mpll_075 3
- arm 4
- hsp 5
- hsp_div 6
- hsp_sel 7
- ahb 8
- ipg 9
- arm_per_div 10
- ahb_per_div 11
- ipg_per 12
- uart_sel 13
- uart_div 14
- esdhc_sel 15
- esdhc1_div 16
- esdhc2_div 17
- esdhc3_div 18
- spdif_sel 19
- spdif_div_pre 20
- spdif_div_post 21
- ssi_sel 22
- ssi1_div_pre 23
- ssi1_div_post 24
- ssi2_div_pre 25
- ssi2_div_post 26
- usb_sel 27
- usb_div 28
- nfc_div 29
- asrc_gate 30
- pata_gate 31
- audmux_gate 32
- can1_gate 33
- can2_gate 34
- cspi1_gate 35
- cspi2_gate 36
- ect_gate 37
- edio_gate 38
- emi_gate 39
- epit1_gate 40
- epit2_gate 41
- esai_gate 42
- esdhc1_gate 43
- esdhc2_gate 44
- esdhc3_gate 45
- fec_gate 46
- gpio1_gate 47
- gpio2_gate 48
- gpio3_gate 49
- gpt_gate 50
- i2c1_gate 51
- i2c2_gate 52
- i2c3_gate 53
- iomuxc_gate 54
- ipu_gate 55
- kpp_gate 56
- mlb_gate 57
- mshc_gate 58
- owire_gate 59
- pwm_gate 60
- rngc_gate 61
- rtc_gate 62
- rtic_gate 63
- scc_gate 64
- sdma_gate 65
- spba_gate 66
- spdif_gate 67
- ssi1_gate 68
- ssi2_gate 69
- uart1_gate 70
- uart2_gate 71
- uart3_gate 72
- usbotg_gate 73
- wdog_gate 74
- max_gate 75
- admux_gate 76
- csi_gate 77
- csi_div 78
- csi_sel 79
- iim_gate 80
- gpu2d_gate 81
- ckli_gate 82
-
-Examples:
-
-clks: ccm@53f80000 {
- compatible = "fsl,imx35-ccm";
- reg = <0x53f80000 0x4000>;
- interrupts = <31>;
- #clock-cells = <1>;
-};
-
-esdhc1: esdhc@53fb4000 {
- compatible = "fsl,imx35-esdhc";
- reg = <0x53fb4000 0x4000>;
- interrupts = <7>;
- clocks = <&clks 9>, <&clks 8>, <&clks 43>;
- clock-names = "ipg", "ahb", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
new file mode 100644
index 0000000..fecea84
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx35-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX35
+
+maintainers:
+ - Steffen Trumtrar <s.trumtrar@pengutronix.de>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX35
+ clocks and IDs.
+
+ Clock ID
+ ---------------------------
+ ckih 0
+ mpll 1
+ ppll 2
+ mpll_075 3
+ arm 4
+ hsp 5
+ hsp_div 6
+ hsp_sel 7
+ ahb 8
+ ipg 9
+ arm_per_div 10
+ ahb_per_div 11
+ ipg_per 12
+ uart_sel 13
+ uart_div 14
+ esdhc_sel 15
+ esdhc1_div 16
+ esdhc2_div 17
+ esdhc3_div 18
+ spdif_sel 19
+ spdif_div_pre 20
+ spdif_div_post 21
+ ssi_sel 22
+ ssi1_div_pre 23
+ ssi1_div_post 24
+ ssi2_div_pre 25
+ ssi2_div_post 26
+ usb_sel 27
+ usb_div 28
+ nfc_div 29
+ asrc_gate 30
+ pata_gate 31
+ audmux_gate 32
+ can1_gate 33
+ can2_gate 34
+ cspi1_gate 35
+ cspi2_gate 36
+ ect_gate 37
+ edio_gate 38
+ emi_gate 39
+ epit1_gate 40
+ epit2_gate 41
+ esai_gate 42
+ esdhc1_gate 43
+ esdhc2_gate 44
+ esdhc3_gate 45
+ fec_gate 46
+ gpio1_gate 47
+ gpio2_gate 48
+ gpio3_gate 49
+ gpt_gate 50
+ i2c1_gate 51
+ i2c2_gate 52
+ i2c3_gate 53
+ iomuxc_gate 54
+ ipu_gate 55
+ kpp_gate 56
+ mlb_gate 57
+ mshc_gate 58
+ owire_gate 59
+ pwm_gate 60
+ rngc_gate 61
+ rtc_gate 62
+ rtic_gate 63
+ scc_gate 64
+ sdma_gate 65
+ spba_gate 66
+ spdif_gate 67
+ ssi1_gate 68
+ ssi2_gate 69
+ uart1_gate 70
+ uart2_gate 71
+ uart3_gate 72
+ usbotg_gate 73
+ wdog_gate 74
+ max_gate 75
+ admux_gate 76
+ csi_gate 77
+ csi_div 78
+ csi_sel 79
+ iim_gate 80
+ gpu2d_gate 81
+ ckli_gate 82
+
+properties:
+ compatible:
+ const: fsl,imx35-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+examples:
+ - |
+ clock-controller@53f80000 {
+ compatible = "fsl,imx35-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ esdhc@53fb4000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fb4000 0x4000>;
+ interrupts = <7>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+ clock-names = "ipg", "ahb", "per";
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 2/9] dt-bindings: clock: Convert i.MX35 clock to json-schema
2020-05-28 7:27 ` [PATCH 2/9] dt-bindings: clock: Convert i.MX35 " Anson Huang
@ 2020-05-29 2:48 ` Rob Herring
0 siblings, 0 replies; 19+ messages in thread
From: Rob Herring @ 2020-05-29 2:48 UTC (permalink / raw)
To: Anson Huang
Cc: shc_work, linux-arm-kernel, sboyd, s.hauer, Linux-imx, robh+dt,
linux-clk, linux-kernel, devicetree, s.trumtrar, kernel,
shawnguo, festevam, mturquette
On Thu, 28 May 2020 15:27:52 +0800, Anson Huang wrote:
> Convert the i.MX35 clock binding to DT schema format using json-schema.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> .../devicetree/bindings/clock/imx35-clock.txt | 114 -----------------
> .../devicetree/bindings/clock/imx35-clock.yaml | 137 +++++++++++++++++++++
> 2 files changed, 137 insertions(+), 114 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/imx35-clock.txt
> create mode 100644 Documentation/devicetree/bindings/clock/imx35-clock.yaml
>
Applied, thanks!
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 3/9] dt-bindings: clock: Convert i.MX31 clock to json-schema
2020-05-28 7:27 [PATCH 0/9] Convert i.MX legacy platforms clock binding to json-schema Anson Huang
2020-05-28 7:27 ` [PATCH 1/9] dt-bindings: clock: Convert i.MX5 clock " Anson Huang
2020-05-28 7:27 ` [PATCH 2/9] dt-bindings: clock: Convert i.MX35 " Anson Huang
@ 2020-05-28 7:27 ` Anson Huang
2020-05-29 2:48 ` Rob Herring
2020-05-28 7:27 ` [PATCH 4/9] dt-bindings: clock: Convert i.MX28 " Anson Huang
` (5 subsequent siblings)
8 siblings, 1 reply; 19+ messages in thread
From: Anson Huang @ 2020-05-28 7:27 UTC (permalink / raw)
To: mturquette, sboyd, robh+dt, shawnguo, s.hauer, kernel, festevam,
shc_work, s.trumtrar, linux-clk, devicetree, linux-arm-kernel,
linux-kernel
Cc: Linux-imx
Convert the i.MX31 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
.../devicetree/bindings/clock/imx31-clock.txt | 90 ----------------
.../devicetree/bindings/clock/imx31-clock.yaml | 118 +++++++++++++++++++++
2 files changed, 118 insertions(+), 90 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx31-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx31-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt
deleted file mode 100644
index 0a29109..0000000
--- a/Documentation/devicetree/bindings/clock/imx31-clock.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-* Clock bindings for Freescale i.MX31
-
-Required properties:
-- compatible: Should be "fsl,imx31-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX31
-clocks and IDs.
-
- Clock ID
- -----------------------
- dummy 0
- ckih 1
- ckil 2
- mpll 3
- spll 4
- upll 5
- mcu_main 6
- hsp 7
- ahb 8
- nfc 9
- ipg 10
- per_div 11
- per 12
- csi_sel 13
- fir_sel 14
- csi_div 15
- usb_div_pre 16
- usb_div_post 17
- fir_div_pre 18
- fir_div_post 19
- sdhc1_gate 20
- sdhc2_gate 21
- gpt_gate 22
- epit1_gate 23
- epit2_gate 24
- iim_gate 25
- ata_gate 26
- sdma_gate 27
- cspi3_gate 28
- rng_gate 29
- uart1_gate 30
- uart2_gate 31
- ssi1_gate 32
- i2c1_gate 33
- i2c2_gate 34
- i2c3_gate 35
- hantro_gate 36
- mstick1_gate 37
- mstick2_gate 38
- csi_gate 39
- rtc_gate 40
- wdog_gate 41
- pwm_gate 42
- sim_gate 43
- ect_gate 44
- usb_gate 45
- kpp_gate 46
- ipu_gate 47
- uart3_gate 48
- uart4_gate 49
- uart5_gate 50
- owire_gate 51
- ssi2_gate 52
- cspi1_gate 53
- cspi2_gate 54
- gacc_gate 55
- emi_gate 56
- rtic_gate 57
- firi_gate 58
-
-Examples:
-
-clks: ccm@53f80000{
- compatible = "fsl,imx31-ccm";
- reg = <0x53f80000 0x4000>;
- interrupts = <31>, <53>;
- #clock-cells = <1>;
-};
-
-uart1: serial@43f90000 {
- compatible = "fsl,imx31-uart", "fsl,imx21-uart";
- reg = <0x43f90000 0x4000>;
- interrupts = <45>;
- clocks = <&clks 10>, <&clks 30>;
- clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
new file mode 100644
index 0000000..2d9220e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx31-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX31
+
+maintainers:
+ - Fabio Estevam <fabio.estevam@freescale.com>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX31
+ clocks and IDs.
+
+ Clock ID
+ -----------------------
+ dummy 0
+ ckih 1
+ ckil 2
+ mpll 3
+ spll 4
+ upll 5
+ mcu_main 6
+ hsp 7
+ ahb 8
+ nfc 9
+ ipg 10
+ per_div 11
+ per 12
+ csi_sel 13
+ fir_sel 14
+ csi_div 15
+ usb_div_pre 16
+ usb_div_post 17
+ fir_div_pre 18
+ fir_div_post 19
+ sdhc1_gate 20
+ sdhc2_gate 21
+ gpt_gate 22
+ epit1_gate 23
+ epit2_gate 24
+ iim_gate 25
+ ata_gate 26
+ sdma_gate 27
+ cspi3_gate 28
+ rng_gate 29
+ uart1_gate 30
+ uart2_gate 31
+ ssi1_gate 32
+ i2c1_gate 33
+ i2c2_gate 34
+ i2c3_gate 35
+ hantro_gate 36
+ mstick1_gate 37
+ mstick2_gate 38
+ csi_gate 39
+ rtc_gate 40
+ wdog_gate 41
+ pwm_gate 42
+ sim_gate 43
+ ect_gate 44
+ usb_gate 45
+ kpp_gate 46
+ ipu_gate 47
+ uart3_gate 48
+ uart4_gate 49
+ uart5_gate 50
+ owire_gate 51
+ ssi2_gate 52
+ cspi1_gate 53
+ cspi2_gate 54
+ gacc_gate 55
+ emi_gate 56
+ rtic_gate 57
+ firi_gate 58
+
+properties:
+ compatible:
+ const: fsl,imx31-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: CCM provides 2 interrupt requests, request 1 is to generate
+ interrupt for DVFS when a frequency change is requested, request 2 is
+ to generate interrupt for DPTC when a voltage change is requested.
+ items:
+ - description: CCM DVFS interrupt request 1
+ - description: CCM DPTC interrupt request 2
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+examples:
+ - |
+ clock-controller@53f80000 {
+ compatible = "fsl,imx31-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>, <53>;
+ #clock-cells = <1>;
+ };
+
+ serial@43f90000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 10>, <&clks 30>;
+ clock-names = "ipg", "per";
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 3/9] dt-bindings: clock: Convert i.MX31 clock to json-schema
2020-05-28 7:27 ` [PATCH 3/9] dt-bindings: clock: Convert i.MX31 " Anson Huang
@ 2020-05-29 2:48 ` Rob Herring
0 siblings, 0 replies; 19+ messages in thread
From: Rob Herring @ 2020-05-29 2:48 UTC (permalink / raw)
To: Anson Huang
Cc: linux-arm-kernel, linux-kernel, shc_work, s.hauer, shawnguo,
devicetree, robh+dt, festevam, linux-clk, kernel, Linux-imx,
s.trumtrar, mturquette, sboyd
On Thu, 28 May 2020 15:27:53 +0800, Anson Huang wrote:
> Convert the i.MX31 clock binding to DT schema format using json-schema.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> .../devicetree/bindings/clock/imx31-clock.txt | 90 ----------------
> .../devicetree/bindings/clock/imx31-clock.yaml | 118 +++++++++++++++++++++
> 2 files changed, 118 insertions(+), 90 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/imx31-clock.txt
> create mode 100644 Documentation/devicetree/bindings/clock/imx31-clock.yaml
>
Applied, thanks!
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 4/9] dt-bindings: clock: Convert i.MX28 clock to json-schema
2020-05-28 7:27 [PATCH 0/9] Convert i.MX legacy platforms clock binding to json-schema Anson Huang
` (2 preceding siblings ...)
2020-05-28 7:27 ` [PATCH 3/9] dt-bindings: clock: Convert i.MX31 " Anson Huang
@ 2020-05-28 7:27 ` Anson Huang
2020-05-29 2:51 ` Rob Herring
2020-05-28 7:27 ` [PATCH 5/9] dt-bindings: clock: Convert i.MX23 " Anson Huang
` (4 subsequent siblings)
8 siblings, 1 reply; 19+ messages in thread
From: Anson Huang @ 2020-05-28 7:27 UTC (permalink / raw)
To: mturquette, sboyd, robh+dt, shawnguo, s.hauer, kernel, festevam,
shc_work, s.trumtrar, linux-clk, devicetree, linux-arm-kernel,
linux-kernel
Cc: Linux-imx
Convert the i.MX28 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
.../devicetree/bindings/clock/imx28-clock.txt | 93 -----------------
.../devicetree/bindings/clock/imx28-clock.yaml | 113 +++++++++++++++++++++
2 files changed, 113 insertions(+), 93 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx28-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx28-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt
deleted file mode 100644
index d84a37d..0000000
--- a/Documentation/devicetree/bindings/clock/imx28-clock.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-* Clock bindings for Freescale i.MX28
-
-Required properties:
-- compatible: Should be "fsl,imx28-clkctrl"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX28
-clocks and IDs.
-
- Clock ID
- ------------------
- ref_xtal 0
- pll0 1
- pll1 2
- pll2 3
- ref_cpu 4
- ref_emi 5
- ref_io0 6
- ref_io1 7
- ref_pix 8
- ref_hsadc 9
- ref_gpmi 10
- saif0_sel 11
- saif1_sel 12
- gpmi_sel 13
- ssp0_sel 14
- ssp1_sel 15
- ssp2_sel 16
- ssp3_sel 17
- emi_sel 18
- etm_sel 19
- lcdif_sel 20
- cpu 21
- ptp_sel 22
- cpu_pll 23
- cpu_xtal 24
- hbus 25
- xbus 26
- ssp0_div 27
- ssp1_div 28
- ssp2_div 29
- ssp3_div 30
- gpmi_div 31
- emi_pll 32
- emi_xtal 33
- lcdif_div 34
- etm_div 35
- ptp 36
- saif0_div 37
- saif1_div 38
- clk32k_div 39
- rtc 40
- lradc 41
- spdif_div 42
- clk32k 43
- pwm 44
- uart 45
- ssp0 46
- ssp1 47
- ssp2 48
- ssp3 49
- gpmi 50
- spdif 51
- emi 52
- saif0 53
- saif1 54
- lcdif 55
- etm 56
- fec 57
- can0 58
- can1 59
- usb0 60
- usb1 61
- usb0_phy 62
- usb1_phy 63
- enet_out 64
-
-Examples:
-
-clks: clkctrl@80040000 {
- compatible = "fsl,imx28-clkctrl";
- reg = <0x80040000 0x2000>;
- #clock-cells = <1>;
-};
-
-auart0: serial@8006a000 {
- compatible = "fsl,imx28-auart", "fsl,imx23-auart";
- reg = <0x8006a000 0x2000>;
- interrupts = <112 70 71>;
- clocks = <&clks 45>;
-};
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
new file mode 100644
index 0000000..e4a7038
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx28-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX28
+
+maintainers:
+ - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX28
+ clocks and IDs.
+
+ Clock ID
+ ------------------
+ ref_xtal 0
+ pll0 1
+ pll1 2
+ pll2 3
+ ref_cpu 4
+ ref_emi 5
+ ref_io0 6
+ ref_io1 7
+ ref_pix 8
+ ref_hsadc 9
+ ref_gpmi 10
+ saif0_sel 11
+ saif1_sel 12
+ gpmi_sel 13
+ ssp0_sel 14
+ ssp1_sel 15
+ ssp2_sel 16
+ ssp3_sel 17
+ emi_sel 18
+ etm_sel 19
+ lcdif_sel 20
+ cpu 21
+ ptp_sel 22
+ cpu_pll 23
+ cpu_xtal 24
+ hbus 25
+ xbus 26
+ ssp0_div 27
+ ssp1_div 28
+ ssp2_div 29
+ ssp3_div 30
+ gpmi_div 31
+ emi_pll 32
+ emi_xtal 33
+ lcdif_div 34
+ etm_div 35
+ ptp 36
+ saif0_div 37
+ saif1_div 38
+ clk32k_div 39
+ rtc 40
+ lradc 41
+ spdif_div 42
+ clk32k 43
+ pwm 44
+ uart 45
+ ssp0 46
+ ssp1 47
+ ssp2 48
+ ssp3 49
+ gpmi 50
+ spdif 51
+ emi 52
+ saif0 53
+ saif1 54
+ lcdif 55
+ etm 56
+ fec 57
+ can0 58
+ can1 59
+ usb0 60
+ usb1 61
+ usb0_phy 62
+ usb1_phy 63
+ enet_out 64
+
+properties:
+ compatible:
+ const: fsl,imx28-clkctrl
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+examples:
+ - |
+ clock-controller@80040000 {
+ compatible = "fsl,imx28-clkctrl";
+ reg = <0x80040000 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112 70 71>;
+ clocks = <&clks 45>;
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 4/9] dt-bindings: clock: Convert i.MX28 clock to json-schema
2020-05-28 7:27 ` [PATCH 4/9] dt-bindings: clock: Convert i.MX28 " Anson Huang
@ 2020-05-29 2:51 ` Rob Herring
0 siblings, 0 replies; 19+ messages in thread
From: Rob Herring @ 2020-05-29 2:51 UTC (permalink / raw)
To: Anson Huang
Cc: mturquette, Linux-imx, robh+dt, shawnguo, shc_work, s.trumtrar,
devicetree, s.hauer, kernel, linux-clk, linux-arm-kernel,
linux-kernel, festevam, sboyd
On Thu, 28 May 2020 15:27:54 +0800, Anson Huang wrote:
> Convert the i.MX28 clock binding to DT schema format using json-schema.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> .../devicetree/bindings/clock/imx28-clock.txt | 93 -----------------
> .../devicetree/bindings/clock/imx28-clock.yaml | 113 +++++++++++++++++++++
> 2 files changed, 113 insertions(+), 93 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/imx28-clock.txt
> create mode 100644 Documentation/devicetree/bindings/clock/imx28-clock.yaml
>
Applied, thanks!
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 5/9] dt-bindings: clock: Convert i.MX23 clock to json-schema
2020-05-28 7:27 [PATCH 0/9] Convert i.MX legacy platforms clock binding to json-schema Anson Huang
` (3 preceding siblings ...)
2020-05-28 7:27 ` [PATCH 4/9] dt-bindings: clock: Convert i.MX28 " Anson Huang
@ 2020-05-28 7:27 ` Anson Huang
2020-05-29 2:51 ` Rob Herring
2020-05-28 7:27 ` [PATCH 6/9] dt-bindings: clock: Convert i.MX27 " Anson Huang
` (3 subsequent siblings)
8 siblings, 1 reply; 19+ messages in thread
From: Anson Huang @ 2020-05-28 7:27 UTC (permalink / raw)
To: mturquette, sboyd, robh+dt, shawnguo, s.hauer, kernel, festevam,
shc_work, s.trumtrar, linux-clk, devicetree, linux-arm-kernel,
linux-kernel
Cc: Linux-imx
Convert the i.MX23 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
.../devicetree/bindings/clock/imx23-clock.txt | 70 -----------------
.../devicetree/bindings/clock/imx23-clock.yaml | 90 ++++++++++++++++++++++
2 files changed, 90 insertions(+), 70 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx23-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx23-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt
deleted file mode 100644
index 8385348..0000000
--- a/Documentation/devicetree/bindings/clock/imx23-clock.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Clock bindings for Freescale i.MX23
-
-Required properties:
-- compatible: Should be "fsl,imx23-clkctrl"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX23
-clocks and IDs.
-
- Clock ID
- ------------------
- ref_xtal 0
- pll 1
- ref_cpu 2
- ref_emi 3
- ref_pix 4
- ref_io 5
- saif_sel 6
- lcdif_sel 7
- gpmi_sel 8
- ssp_sel 9
- emi_sel 10
- cpu 11
- etm_sel 12
- cpu_pll 13
- cpu_xtal 14
- hbus 15
- xbus 16
- lcdif_div 17
- ssp_div 18
- gpmi_div 19
- emi_pll 20
- emi_xtal 21
- etm_div 22
- saif_div 23
- clk32k_div 24
- rtc 25
- adc 26
- spdif_div 27
- clk32k 28
- dri 29
- pwm 30
- filt 31
- uart 32
- ssp 33
- gpmi 34
- spdif 35
- emi 36
- saif 37
- lcdif 38
- etm 39
- usb 40
- usb_phy 41
-
-Examples:
-
-clks: clkctrl@80040000 {
- compatible = "fsl,imx23-clkctrl";
- reg = <0x80040000 0x2000>;
- #clock-cells = <1>;
-};
-
-auart0: serial@8006c000 {
- compatible = "fsl,imx23-auart";
- reg = <0x8006c000 0x2000>;
- interrupts = <24 25 23>;
- clocks = <&clks 32>;
-};
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
new file mode 100644
index 0000000..0fd21f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx23-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX23
+
+maintainers:
+ - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX23
+ clocks and IDs.
+
+ Clock ID
+ ------------------
+ ref_xtal 0
+ pll 1
+ ref_cpu 2
+ ref_emi 3
+ ref_pix 4
+ ref_io 5
+ saif_sel 6
+ lcdif_sel 7
+ gpmi_sel 8
+ ssp_sel 9
+ emi_sel 10
+ cpu 11
+ etm_sel 12
+ cpu_pll 13
+ cpu_xtal 14
+ hbus 15
+ xbus 16
+ lcdif_div 17
+ ssp_div 18
+ gpmi_div 19
+ emi_pll 20
+ emi_xtal 21
+ etm_div 22
+ saif_div 23
+ clk32k_div 24
+ rtc 25
+ adc 26
+ spdif_div 27
+ clk32k 28
+ dri 29
+ pwm 30
+ filt 31
+ uart 32
+ ssp 33
+ gpmi 34
+ spdif 35
+ emi 36
+ saif 37
+ lcdif 38
+ etm 39
+ usb 40
+ usb_phy 41
+
+properties:
+ compatible:
+ const: fsl,imx23-clkctrl
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+examples:
+ - |
+ clock-controller@80040000 {
+ compatible = "fsl,imx23-clkctrl";
+ reg = <0x80040000 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ serial@8006c000 {
+ compatible = "fsl,imx23-auart";
+ reg = <0x8006c000 0x2000>;
+ interrupts = <24 25 23>;
+ clocks = <&clks 32>;
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 5/9] dt-bindings: clock: Convert i.MX23 clock to json-schema
2020-05-28 7:27 ` [PATCH 5/9] dt-bindings: clock: Convert i.MX23 " Anson Huang
@ 2020-05-29 2:51 ` Rob Herring
0 siblings, 0 replies; 19+ messages in thread
From: Rob Herring @ 2020-05-29 2:51 UTC (permalink / raw)
To: Anson Huang
Cc: s.hauer, mturquette, robh+dt, shc_work, linux-kernel, kernel,
linux-arm-kernel, festevam, linux-clk, Linux-imx, sboyd,
devicetree, s.trumtrar, shawnguo
On Thu, 28 May 2020 15:27:55 +0800, Anson Huang wrote:
> Convert the i.MX23 clock binding to DT schema format using json-schema.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> .../devicetree/bindings/clock/imx23-clock.txt | 70 -----------------
> .../devicetree/bindings/clock/imx23-clock.yaml | 90 ++++++++++++++++++++++
> 2 files changed, 90 insertions(+), 70 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/imx23-clock.txt
> create mode 100644 Documentation/devicetree/bindings/clock/imx23-clock.yaml
>
Applied, thanks!
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 6/9] dt-bindings: clock: Convert i.MX27 clock to json-schema
2020-05-28 7:27 [PATCH 0/9] Convert i.MX legacy platforms clock binding to json-schema Anson Huang
` (4 preceding siblings ...)
2020-05-28 7:27 ` [PATCH 5/9] dt-bindings: clock: Convert i.MX23 " Anson Huang
@ 2020-05-28 7:27 ` Anson Huang
2020-05-29 2:52 ` Rob Herring
2020-05-28 7:27 ` [PATCH 7/9] dt-bindings: clock: Convert i.MX25 " Anson Huang
` (2 subsequent siblings)
8 siblings, 1 reply; 19+ messages in thread
From: Anson Huang @ 2020-05-28 7:27 UTC (permalink / raw)
To: mturquette, sboyd, robh+dt, shawnguo, s.hauer, kernel, festevam,
shc_work, s.trumtrar, linux-clk, devicetree, linux-arm-kernel,
linux-kernel
Cc: Linux-imx
Convert the i.MX27 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
.../devicetree/bindings/clock/imx27-clock.txt | 27 -----------
.../devicetree/bindings/clock/imx27-clock.yaml | 53 ++++++++++++++++++++++
2 files changed, 53 insertions(+), 27 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx27-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx27-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt
deleted file mode 100644
index 4c95c04..0000000
--- a/Documentation/devicetree/bindings/clock/imx27-clock.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Clock bindings for Freescale i.MX27
-
-Required properties:
-- compatible: Should be "fsl,imx27-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
-for the full list of i.MX27 clock IDs.
-
-Examples:
- clks: ccm@10027000{
- compatible = "fsl,imx27-ccm";
- reg = <0x10027000 0x1000>;
- #clock-cells = <1>;
- };
-
- uart1: serial@1000a000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1000a000 0x1000>;
- interrupts = <20>;
- clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
- <&clks IMX27_CLK_PER1_GATE>;
- clock-names = "ipg", "per";
- };
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
new file mode 100644
index 0000000..2d69807
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx27-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX27
+
+maintainers:
+ - Fabio Estevam <fabio.estevam@freescale.com>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
+ for the full list of i.MX27 clock IDs.
+
+properties:
+ compatible:
+ const: fsl,imx27-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx27-clock.h>
+
+ clock-controller@10027000 {
+ compatible = "fsl,imx27-ccm";
+ reg = <0x10027000 0x1000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ serial@1000a000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1000a000 0x1000>;
+ interrupts = <20>;
+ clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
+ clock-names = "ipg", "per";
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 6/9] dt-bindings: clock: Convert i.MX27 clock to json-schema
2020-05-28 7:27 ` [PATCH 6/9] dt-bindings: clock: Convert i.MX27 " Anson Huang
@ 2020-05-29 2:52 ` Rob Herring
0 siblings, 0 replies; 19+ messages in thread
From: Rob Herring @ 2020-05-29 2:52 UTC (permalink / raw)
To: Anson Huang
Cc: linux-arm-kernel, devicetree, festevam, robh+dt, sboyd, shawnguo,
Linux-imx, linux-clk, linux-kernel, s.trumtrar, kernel, shc_work,
mturquette, s.hauer
On Thu, 28 May 2020 15:27:56 +0800, Anson Huang wrote:
> Convert the i.MX27 clock binding to DT schema format using json-schema.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> .../devicetree/bindings/clock/imx27-clock.txt | 27 -----------
> .../devicetree/bindings/clock/imx27-clock.yaml | 53 ++++++++++++++++++++++
> 2 files changed, 53 insertions(+), 27 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/imx27-clock.txt
> create mode 100644 Documentation/devicetree/bindings/clock/imx27-clock.yaml
>
Applied, thanks!
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 7/9] dt-bindings: clock: Convert i.MX25 clock to json-schema
2020-05-28 7:27 [PATCH 0/9] Convert i.MX legacy platforms clock binding to json-schema Anson Huang
` (5 preceding siblings ...)
2020-05-28 7:27 ` [PATCH 6/9] dt-bindings: clock: Convert i.MX27 " Anson Huang
@ 2020-05-28 7:27 ` Anson Huang
2020-05-29 2:53 ` Rob Herring
2020-05-28 7:27 ` [PATCH 8/9] dt-bindings: clock: Convert i.MX21 " Anson Huang
2020-05-28 7:27 ` [PATCH 9/9] dt-bindings: clock: Convert i.MX1 " Anson Huang
8 siblings, 1 reply; 19+ messages in thread
From: Anson Huang @ 2020-05-28 7:27 UTC (permalink / raw)
To: mturquette, sboyd, robh+dt, shawnguo, s.hauer, kernel, festevam,
shc_work, s.trumtrar, linux-clk, devicetree, linux-arm-kernel,
linux-kernel
Cc: Linux-imx
Convert the i.MX25 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
.../devicetree/bindings/clock/imx25-clock.txt | 160 ------------------
.../devicetree/bindings/clock/imx25-clock.yaml | 184 +++++++++++++++++++++
2 files changed, 184 insertions(+), 160 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx25-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx25-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt
deleted file mode 100644
index f8135ea..0000000
--- a/Documentation/devicetree/bindings/clock/imx25-clock.txt
+++ /dev/null
@@ -1,160 +0,0 @@
-* Clock bindings for Freescale i.MX25
-
-Required properties:
-- compatible: Should be "fsl,imx25-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX25
-clocks and IDs.
-
- Clock ID
- ---------------------------
- dummy 0
- osc 1
- mpll 2
- upll 3
- mpll_cpu_3_4 4
- cpu_sel 5
- cpu 6
- ahb 7
- usb_div 8
- ipg 9
- per0_sel 10
- per1_sel 11
- per2_sel 12
- per3_sel 13
- per4_sel 14
- per5_sel 15
- per6_sel 16
- per7_sel 17
- per8_sel 18
- per9_sel 19
- per10_sel 20
- per11_sel 21
- per12_sel 22
- per13_sel 23
- per14_sel 24
- per15_sel 25
- per0 26
- per1 27
- per2 28
- per3 29
- per4 30
- per5 31
- per6 32
- per7 33
- per8 34
- per9 35
- per10 36
- per11 37
- per12 38
- per13 39
- per14 40
- per15 41
- csi_ipg_per 42
- epit_ipg_per 43
- esai_ipg_per 44
- esdhc1_ipg_per 45
- esdhc2_ipg_per 46
- gpt_ipg_per 47
- i2c_ipg_per 48
- lcdc_ipg_per 49
- nfc_ipg_per 50
- owire_ipg_per 51
- pwm_ipg_per 52
- sim1_ipg_per 53
- sim2_ipg_per 54
- ssi1_ipg_per 55
- ssi2_ipg_per 56
- uart_ipg_per 57
- ata_ahb 58
- reserved 59
- csi_ahb 60
- emi_ahb 61
- esai_ahb 62
- esdhc1_ahb 63
- esdhc2_ahb 64
- fec_ahb 65
- lcdc_ahb 66
- rtic_ahb 67
- sdma_ahb 68
- slcdc_ahb 69
- usbotg_ahb 70
- reserved 71
- reserved 72
- reserved 73
- reserved 74
- can1_ipg 75
- can2_ipg 76
- csi_ipg 77
- cspi1_ipg 78
- cspi2_ipg 79
- cspi3_ipg 80
- dryice_ipg 81
- ect_ipg 82
- epit1_ipg 83
- epit2_ipg 84
- reserved 85
- esdhc1_ipg 86
- esdhc2_ipg 87
- fec_ipg 88
- reserved 89
- reserved 90
- reserved 91
- gpt1_ipg 92
- gpt2_ipg 93
- gpt3_ipg 94
- gpt4_ipg 95
- reserved 96
- reserved 97
- reserved 98
- iim_ipg 99
- reserved 100
- reserved 101
- kpp_ipg 102
- lcdc_ipg 103
- reserved 104
- pwm1_ipg 105
- pwm2_ipg 106
- pwm3_ipg 107
- pwm4_ipg 108
- rngb_ipg 109
- reserved 110
- scc_ipg 111
- sdma_ipg 112
- sim1_ipg 113
- sim2_ipg 114
- slcdc_ipg 115
- spba_ipg 116
- ssi1_ipg 117
- ssi2_ipg 118
- tsc_ipg 119
- uart1_ipg 120
- uart2_ipg 121
- uart3_ipg 122
- uart4_ipg 123
- uart5_ipg 124
- reserved 125
- wdt_ipg 126
- cko_div 127
- cko_sel 128
- cko 129
-
-Examples:
-
-clks: ccm@53f80000 {
- compatible = "fsl,imx25-ccm";
- reg = <0x53f80000 0x4000>;
- interrupts = <31>;
-};
-
-uart1: serial@43f90000 {
- compatible = "fsl,imx25-uart", "fsl,imx21-uart";
- reg = <0x43f90000 0x4000>;
- interrupts = <45>;
- clocks = <&clks 79>, <&clks 50>;
- clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.yaml b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
new file mode 100644
index 0000000..d25c537
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx25-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX25
+
+maintainers:
+ - Sascha Hauer <s.hauer@pengutronix.de>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. The following is a full list of i.MX25
+ clocks and IDs.
+
+ Clock ID
+ --------------------------
+ dummy 0
+ osc 1
+ mpll 2
+ upll 3
+ mpll_cpu_3_4 4
+ cpu_sel 5
+ cpu 6
+ ahb 7
+ usb_div 8
+ ipg 9
+ per0_sel 10
+ per1_sel 11
+ per2_sel 12
+ per3_sel 13
+ per4_sel 14
+ per5_sel 15
+ per6_sel 16
+ per7_sel 17
+ per8_sel 18
+ per9_sel 19
+ per10_sel 20
+ per11_sel 21
+ per12_sel 22
+ per13_sel 23
+ per14_sel 24
+ per15_sel 25
+ per0 26
+ per1 27
+ per2 28
+ per3 29
+ per4 30
+ per5 31
+ per6 32
+ per7 33
+ per8 34
+ per9 35
+ per10 36
+ per11 37
+ per12 38
+ per13 39
+ per14 40
+ per15 41
+ csi_ipg_per 42
+ epit_ipg_per 43
+ esai_ipg_per 44
+ esdhc1_ipg_per 45
+ esdhc2_ipg_per 46
+ gpt_ipg_per 47
+ i2c_ipg_per 48
+ lcdc_ipg_per 49
+ nfc_ipg_per 50
+ owire_ipg_per 51
+ pwm_ipg_per 52
+ sim1_ipg_per 53
+ sim2_ipg_per 54
+ ssi1_ipg_per 55
+ ssi2_ipg_per 56
+ uart_ipg_per 57
+ ata_ahb 58
+ reserved 59
+ csi_ahb 60
+ emi_ahb 61
+ esai_ahb 62
+ esdhc1_ahb 63
+ esdhc2_ahb 64
+ fec_ahb 65
+ lcdc_ahb 66
+ rtic_ahb 67
+ sdma_ahb 68
+ slcdc_ahb 69
+ usbotg_ahb 70
+ reserved 71
+ reserved 72
+ reserved 73
+ reserved 74
+ can1_ipg 75
+ can2_ipg 76
+ csi_ipg 77
+ cspi1_ipg 78
+ cspi2_ipg 79
+ cspi3_ipg 80
+ dryice_ipg 81
+ ect_ipg 82
+ epit1_ipg 83
+ epit2_ipg 84
+ reserved 85
+ esdhc1_ipg 86
+ esdhc2_ipg 87
+ fec_ipg 88
+ reserved 89
+ reserved 90
+ reserved 91
+ gpt1_ipg 92
+ gpt2_ipg 93
+ gpt3_ipg 94
+ gpt4_ipg 95
+ reserved 96
+ reserved 97
+ reserved 98
+ iim_ipg 99
+ reserved 100
+ reserved 101
+ kpp_ipg 102
+ lcdc_ipg 103
+ reserved 104
+ pwm1_ipg 105
+ pwm2_ipg 106
+ pwm3_ipg 107
+ pwm4_ipg 108
+ rngb_ipg 109
+ reserved 110
+ scc_ipg 111
+ sdma_ipg 112
+ sim1_ipg 113
+ sim2_ipg 114
+ slcdc_ipg 115
+ spba_ipg 116
+ ssi1_ipg 117
+ ssi2_ipg 118
+ tsc_ipg 119
+ uart1_ipg 120
+ uart2_ipg 121
+ uart3_ipg 122
+ uart4_ipg 123
+ uart5_ipg 124
+ reserved 125
+ wdt_ipg 126
+ cko_div 127
+ cko_sel 128
+ cko 129
+
+properties:
+ compatible:
+ const: fsl,imx25-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+examples:
+ - |
+ clock-controller@53f80000 {
+ compatible = "fsl,imx25-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ serial@43f90000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 79>, <&clks 50>;
+ clock-names = "ipg", "per";
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 7/9] dt-bindings: clock: Convert i.MX25 clock to json-schema
2020-05-28 7:27 ` [PATCH 7/9] dt-bindings: clock: Convert i.MX25 " Anson Huang
@ 2020-05-29 2:53 ` Rob Herring
0 siblings, 0 replies; 19+ messages in thread
From: Rob Herring @ 2020-05-29 2:53 UTC (permalink / raw)
To: Anson Huang
Cc: kernel, linux-clk, s.hauer, mturquette, devicetree, linux-kernel,
sboyd, s.trumtrar, linux-arm-kernel, festevam, robh+dt,
Linux-imx, shawnguo, shc_work
On Thu, 28 May 2020 15:27:57 +0800, Anson Huang wrote:
> Convert the i.MX25 clock binding to DT schema format using json-schema.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> .../devicetree/bindings/clock/imx25-clock.txt | 160 ------------------
> .../devicetree/bindings/clock/imx25-clock.yaml | 184 +++++++++++++++++++++
> 2 files changed, 184 insertions(+), 160 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/imx25-clock.txt
> create mode 100644 Documentation/devicetree/bindings/clock/imx25-clock.yaml
>
Applied, thanks!
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 8/9] dt-bindings: clock: Convert i.MX21 clock to json-schema
2020-05-28 7:27 [PATCH 0/9] Convert i.MX legacy platforms clock binding to json-schema Anson Huang
` (6 preceding siblings ...)
2020-05-28 7:27 ` [PATCH 7/9] dt-bindings: clock: Convert i.MX25 " Anson Huang
@ 2020-05-28 7:27 ` Anson Huang
2020-05-29 2:53 ` Rob Herring
2020-05-28 7:27 ` [PATCH 9/9] dt-bindings: clock: Convert i.MX1 " Anson Huang
8 siblings, 1 reply; 19+ messages in thread
From: Anson Huang @ 2020-05-28 7:27 UTC (permalink / raw)
To: mturquette, sboyd, robh+dt, shawnguo, s.hauer, kernel, festevam,
shc_work, s.trumtrar, linux-clk, devicetree, linux-arm-kernel,
linux-kernel
Cc: Linux-imx
Convert the i.MX21 clock binding to DT schema format using json-schema,
can NOT find any CCM interrupt info from reference manual and DT file,
so interrupts property is removed from original binding doc.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
.../devicetree/bindings/clock/imx21-clock.txt | 27 ------------
.../devicetree/bindings/clock/imx21-clock.yaml | 49 ++++++++++++++++++++++
2 files changed, 49 insertions(+), 27 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx21-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx21-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.txt b/Documentation/devicetree/bindings/clock/imx21-clock.txt
deleted file mode 100644
index 806f63d..0000000
--- a/Documentation/devicetree/bindings/clock/imx21-clock.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Clock bindings for Freescale i.MX21
-
-Required properties:
-- compatible : Should be "fsl,imx21-ccm".
-- reg : Address and length of the register set.
-- interrupts : Should contain CCM interrupt.
-- #clock-cells: Should be <1>.
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
-for the full list of i.MX21 clock IDs.
-
-Examples:
- clks: ccm@10027000{
- compatible = "fsl,imx21-ccm";
- reg = <0x10027000 0x800>;
- #clock-cells = <1>;
- };
-
- uart1: serial@1000a000 {
- compatible = "fsl,imx21-uart";
- reg = <0x1000a000 0x1000>;
- interrupts = <20>;
- clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
- <&clks IMX21_CLK_PER1>;
- clock-names = "ipg", "per";
- };
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.yaml b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
new file mode 100644
index 0000000..cee9b00
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx21-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX21
+
+maintainers:
+ - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+ for the full list of i.MX21 clock IDs.
+
+properties:
+ compatible:
+ const: fsl,imx21-ccm
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx21-clock.h>
+
+ clock-controller@10027000 {
+ compatible = "fsl,imx21-ccm";
+ reg = <0x10027000 0x800>;
+ #clock-cells = <1>;
+ };
+
+ serial@1000a000 {
+ compatible = "fsl,imx21-uart";
+ reg = <0x1000a000 0x1000>;
+ interrupts = <20>;
+ clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
+ <&clks IMX21_CLK_PER1>;
+ clock-names = "ipg", "per";
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 8/9] dt-bindings: clock: Convert i.MX21 clock to json-schema
2020-05-28 7:27 ` [PATCH 8/9] dt-bindings: clock: Convert i.MX21 " Anson Huang
@ 2020-05-29 2:53 ` Rob Herring
0 siblings, 0 replies; 19+ messages in thread
From: Rob Herring @ 2020-05-29 2:53 UTC (permalink / raw)
To: Anson Huang
Cc: s.trumtrar, linux-kernel, sboyd, shawnguo, festevam, linux-clk,
robh+dt, devicetree, Linux-imx, kernel, mturquette, s.hauer,
shc_work, linux-arm-kernel
On Thu, 28 May 2020 15:27:58 +0800, Anson Huang wrote:
> Convert the i.MX21 clock binding to DT schema format using json-schema,
> can NOT find any CCM interrupt info from reference manual and DT file,
> so interrupts property is removed from original binding doc.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> .../devicetree/bindings/clock/imx21-clock.txt | 27 ------------
> .../devicetree/bindings/clock/imx21-clock.yaml | 49 ++++++++++++++++++++++
> 2 files changed, 49 insertions(+), 27 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/imx21-clock.txt
> create mode 100644 Documentation/devicetree/bindings/clock/imx21-clock.yaml
>
Applied, thanks!
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 9/9] dt-bindings: clock: Convert i.MX1 clock to json-schema
2020-05-28 7:27 [PATCH 0/9] Convert i.MX legacy platforms clock binding to json-schema Anson Huang
` (7 preceding siblings ...)
2020-05-28 7:27 ` [PATCH 8/9] dt-bindings: clock: Convert i.MX21 " Anson Huang
@ 2020-05-28 7:27 ` Anson Huang
2020-05-29 2:54 ` Rob Herring
8 siblings, 1 reply; 19+ messages in thread
From: Anson Huang @ 2020-05-28 7:27 UTC (permalink / raw)
To: mturquette, sboyd, robh+dt, shawnguo, s.hauer, kernel, festevam,
shc_work, s.trumtrar, linux-clk, devicetree, linux-arm-kernel,
linux-kernel
Cc: Linux-imx
Convert the i.MX1 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
.../devicetree/bindings/clock/imx1-clock.txt | 26 ------------
.../devicetree/bindings/clock/imx1-clock.yaml | 49 ++++++++++++++++++++++
2 files changed, 49 insertions(+), 26 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx1-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx1-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.txt b/Documentation/devicetree/bindings/clock/imx1-clock.txt
deleted file mode 100644
index 9823baf..0000000
--- a/Documentation/devicetree/bindings/clock/imx1-clock.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Clock bindings for Freescale i.MX1 CPUs
-
-Required properties:
-- compatible: Should be "fsl,imx1-ccm".
-- reg: Address and length of the register set.
-- #clock-cells: Should be <1>.
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
-for the full list of i.MX1 clock IDs.
-
-Examples:
- clks: ccm@21b000 {
- #clock-cells = <1>;
- compatible = "fsl,imx1-ccm";
- reg = <0x0021b000 0x1000>;
- };
-
- pwm: pwm@208000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx1-pwm";
- reg = <0x00208000 0x1000>;
- interrupts = <34>;
- clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
- clock-names = "ipg", "per";
- };
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.yaml b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
new file mode 100644
index 0000000..06a0ff9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx1-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX1 CPUs
+
+maintainers:
+ - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+ for the full list of i.MX1 clock IDs.
+
+properties:
+ compatible:
+ const: fsl,imx1-ccm
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx1-clock.h>
+
+ clock-controller@21b000 {
+ #clock-cells = <1>;
+ compatible = "fsl,imx1-ccm";
+ reg = <0x0021b000 0x1000>;
+ };
+
+ pwm@208000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx1-pwm";
+ reg = <0x00208000 0x1000>;
+ interrupts = <34>;
+ clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
+ clock-names = "ipg", "per";
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH 9/9] dt-bindings: clock: Convert i.MX1 clock to json-schema
2020-05-28 7:27 ` [PATCH 9/9] dt-bindings: clock: Convert i.MX1 " Anson Huang
@ 2020-05-29 2:54 ` Rob Herring
0 siblings, 0 replies; 19+ messages in thread
From: Rob Herring @ 2020-05-29 2:54 UTC (permalink / raw)
To: Anson Huang
Cc: shawnguo, kernel, festevam, s.trumtrar, s.hauer, mturquette,
shc_work, linux-kernel, robh+dt, linux-arm-kernel, Linux-imx,
devicetree, sboyd, linux-clk
On Thu, 28 May 2020 15:27:59 +0800, Anson Huang wrote:
> Convert the i.MX1 clock binding to DT schema format using json-schema.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> .../devicetree/bindings/clock/imx1-clock.txt | 26 ------------
> .../devicetree/bindings/clock/imx1-clock.yaml | 49 ++++++++++++++++++++++
> 2 files changed, 49 insertions(+), 26 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/imx1-clock.txt
> create mode 100644 Documentation/devicetree/bindings/clock/imx1-clock.yaml
>
Applied, thanks!
^ permalink raw reply [flat|nested] 19+ messages in thread