Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Stephen Boyd <sboyd@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Niklas Cassel <niklas.cassel@linaro.org>,
	Niklas Cassel <nks@flawful.org>, Sasha Levin <sashal@kernel.org>,
	linux-clk@vger.kernel.org
Subject: [PATCH AUTOSEL 5.5 281/542] clk: Use parent node pointer during registration if necessary
Date: Fri, 14 Feb 2020 10:44:33 -0500
Message-ID: <20200214154854.6746-281-sashal@kernel.org> (raw)
In-Reply-To: <20200214154854.6746-1-sashal@kernel.org>

From: Stephen Boyd <sboyd@kernel.org>

[ Upstream commit 9011f92622e5ef2d075f45e5fa818776d4feb8c0 ]

Sometimes clk drivers are attached to devices which are children of a
parent device that is connected to a node in DT. This happens when
devices are MFD-ish and the parent device driver mostly registers child
devices to match against drivers placed in their respective subsystem
directories like drivers/clk, drivers/regulator, etc. When the clk
driver calls clk_register() with a device pointer, that struct device
pointer won't have a device_node associated with it because it was
created purely in software as a way to partition logic to a subsystem.

This causes problems for the way we find parent clks for the clks
registered by these child devices because we look at the registering
device's device_node pointer to lookup 'clocks' and 'clock-names'
properties. Let's use the parent device's device_node pointer if the
registering device doesn't have a device_node but the parent does. This
simplifies clk registration code by avoiding the need to assign some
device_node to the device registering the clk.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20191230190455.141339-1-sboyd@kernel.org
[sboyd@kernel.org: Fixup kernel-doc notation]
Reviewed-by: Niklas Cassel <nks@flawful.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk.c | 27 +++++++++++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 53585cfc4b9ba..66f056ac4c156 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3736,6 +3736,28 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
 	return ERR_PTR(ret);
 }
 
+/**
+ * dev_or_parent_of_node() - Get device node of @dev or @dev's parent
+ * @dev: Device to get device node of
+ *
+ * Return: device node pointer of @dev, or the device node pointer of
+ * @dev->parent if dev doesn't have a device node, or NULL if neither
+ * @dev or @dev->parent have a device node.
+ */
+static struct device_node *dev_or_parent_of_node(struct device *dev)
+{
+	struct device_node *np;
+
+	if (!dev)
+		return NULL;
+
+	np = dev_of_node(dev);
+	if (!np)
+		np = dev_of_node(dev->parent);
+
+	return np;
+}
+
 /**
  * clk_register - allocate a new clock, register it and return an opaque cookie
  * @dev: device that is registering this clock
@@ -3751,7 +3773,7 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
  */
 struct clk *clk_register(struct device *dev, struct clk_hw *hw)
 {
-	return __clk_register(dev, dev_of_node(dev), hw);
+	return __clk_register(dev, dev_or_parent_of_node(dev), hw);
 }
 EXPORT_SYMBOL_GPL(clk_register);
 
@@ -3767,7 +3789,8 @@ EXPORT_SYMBOL_GPL(clk_register);
  */
 int clk_hw_register(struct device *dev, struct clk_hw *hw)
 {
-	return PTR_ERR_OR_ZERO(__clk_register(dev, dev_of_node(dev), hw));
+	return PTR_ERR_OR_ZERO(__clk_register(dev, dev_or_parent_of_node(dev),
+			       hw));
 }
 EXPORT_SYMBOL_GPL(clk_hw_register);
 
-- 
2.20.1


  parent reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200214154854.6746-1-sashal@kernel.org>
2020-02-14 15:40 ` [PATCH AUTOSEL 5.5 020/542] clk: meson: g12a: fix missing uart2 in regmap table Sasha Levin
2020-02-14 15:40 ` [PATCH AUTOSEL 5.5 021/542] clk: meson: pll: Fix by 0 division in __pll_params_to_rate() Sasha Levin
2020-02-14 15:40 ` [PATCH AUTOSEL 5.5 047/542] clk: at91: sam9x60: fix programmable clock prescaler Sasha Levin
2020-02-14 15:40 ` [PATCH AUTOSEL 5.5 049/542] clk: meson: meson8b: make the CCF use the glitch-free mali mux Sasha Levin
2020-02-14 15:41 ` [PATCH AUTOSEL 5.5 085/542] clk: ti: dra7: fix parent for gmac_clkctrl Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 129/542] clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq() Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 130/542] clk: qcom: rcg2: Don't crash if our parent can't be found; return an error Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 196/542] clk: imx: Add correct failure handling for clk based helpers Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 236/542] clk: qcom: smd: Add missing bimc clock Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 245/542] clk: renesas: rcar-gen3: Allow changing the RPC[D2] clocks Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 257/542] clk: qcom: Add missing msm8998 gcc_bimc_gfx_clk Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 258/542] clk: actually call the clock init before any other callback of the clock Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 260/542] clk: bm1800: Remove set but not used variable 'fref' Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 279/542] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock Sasha Levin
2020-02-14 15:44 ` Sasha Levin [this message]
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 282/542] clk: uniphier: Add SCSSI clock gate for each channel Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214154854.6746-281-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=niklas.cassel@linaro.org \
    --cc=nks@flawful.org \
    --cc=sboyd@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git