Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3 0/3] Add functions to operate USB PHY related clock.
@ 2020-06-30 16:38 周琰杰 (Zhou Yanjie)
  2020-06-30 16:38 ` [PATCH v3 1/3] clk: JZ4780: Add functions for enable and disable USB PHY 周琰杰 (Zhou Yanjie)
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: 周琰杰 (Zhou Yanjie) @ 2020-06-30 16:38 UTC (permalink / raw)
  To: linux-clk
  Cc: linux-kernel, sboyd, paul, mturquette, dongsheng.qiu, aric.pzqi,
	rick.tyliu, yanfei.li, sernia.zhou, zhenwenjin

v2->v3:
1.Remove the wrong "WARN()".
2.Remove extra blank line.
3.Fix wrong parameters in recalc_rate/set_rate functions.

周琰杰 (Zhou Yanjie) (3):
  clk: JZ4780: Add functions for enable and disable USB PHY.
  clk: JZ4780: Reformat the code to align it.
  clk: X1000: Add support for calculat REFCLK of USB PHY.

 drivers/clk/ingenic/jz4780-cgu.c | 153 ++++++++++++++++++++-------------------
 drivers/clk/ingenic/x1000-cgu.c  |  84 ++++++++++++++++++++-
 2 files changed, 162 insertions(+), 75 deletions(-)

-- 
2.11.0



^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-30 16:38 [PATCH v3 0/3] Add functions to operate USB PHY related clock 周琰杰 (Zhou Yanjie)
2020-06-30 16:38 ` [PATCH v3 1/3] clk: JZ4780: Add functions for enable and disable USB PHY 周琰杰 (Zhou Yanjie)
2020-06-30 16:38 ` [PATCH v3 2/3] clk: JZ4780: Reformat the code to align it 周琰杰 (Zhou Yanjie)
2020-06-30 16:38 ` [PATCH v3 3/3] clk: X1000: Add support for calculat REFCLK of USB PHY 周琰杰 (Zhou Yanjie)
2020-07-25  4:01 ` [PATCH v3 0/3] Add functions to operate USB PHY related clock Zhou Yanjie
2020-07-28  1:19   ` Stephen Boyd
2020-07-28  1:46     ` Paul Cercueil

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git