* [PATCH V3 3/9] powerpc/vas: Add VAS user space API
2020-02-29 11:04 [PATCH V2 0/9] crypto/nx: Enable GZIP engine and provide userpace API Haren Myneni
2020-02-29 11:11 ` [PATCH V2 1/9] powerpc/vas: Initialize window attributes for GZIP coprocessor type Haren Myneni
2020-02-29 11:11 ` [PATCH V2 2/9] powerpc/vas: Define VAS_TX_WIN_OPEN ioctl API Haren Myneni
@ 2020-02-29 11:14 ` Haren Myneni
2020-02-29 11:15 ` [PATCH V2 4/9] crypto/nx: Initialize coproc entry with kzalloc Haren Myneni
` (5 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Haren Myneni @ 2020-02-29 11:14 UTC (permalink / raw)
To: herbert; +Cc: mpe, mikey, sukadev, linuxppc-dev, linux-crypto, npiggin
On power9, userspace can send GZIP compression requests directly to NX
once kernel establishes NX channel / window with VAS. This patch provides
user space API which allows user space to establish channel using open
VAS_TX_WIN_OPEN ioctl, mmap and close operations.
Each window corresponds to file descriptor and application can open
multiple windows. After the window is opened, VAS_TX_WIN_OPEN icoctl to
open a window on specific VAS instance, mmap() system call to map
the hardware address of engine's request queue into the application's
virtual address space.
Then the application can then submit one or more requests to the the
engine by using the copy/paste instructions and pasting the CRBs to
the virtual address (aka paste_address) returned by mmap().
Only NX GZIP coprocessor type is supported right now and allow GZIP
engine access via /dev/crypto/nx-gzip device node.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
---
arch/powerpc/include/asm/vas.h | 11 ++
arch/powerpc/platforms/powernv/Makefile | 2 +-
arch/powerpc/platforms/powernv/vas-api.c | 290 ++++++++++++++++++++++++++++
arch/powerpc/platforms/powernv/vas-window.c | 6 +-
arch/powerpc/platforms/powernv/vas.h | 2 +
5 files changed, 307 insertions(+), 4 deletions(-)
create mode 100644 arch/powerpc/platforms/powernv/vas-api.c
diff --git a/arch/powerpc/include/asm/vas.h b/arch/powerpc/include/asm/vas.h
index f93e6b0..e064953 100644
--- a/arch/powerpc/include/asm/vas.h
+++ b/arch/powerpc/include/asm/vas.h
@@ -163,4 +163,15 @@ struct vas_window *vas_tx_win_open(int vasid, enum vas_cop_type cop,
*/
int vas_paste_crb(struct vas_window *win, int offset, bool re);
+/*
+ * Register / unregister coprocessor type to VAS API which will be exported
+ * to user space. Applications can use this API to open / close window
+ * which can be used to send / receive requests directly to cooprcessor.
+ *
+ * Only NX GZIP coprocessor type is supported now, but this API can be
+ * used for others in future.
+ */
+int vas_register_coproc_api(struct module *mod);
+void vas_unregister_coproc_api(void);
+
#endif /* __ASM_POWERPC_VAS_H */
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 395789f..fe3f0fb 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -17,7 +17,7 @@ obj-$(CONFIG_MEMORY_FAILURE) += opal-memory-errors.o
obj-$(CONFIG_OPAL_PRD) += opal-prd.o
obj-$(CONFIG_PERF_EVENTS) += opal-imc.o
obj-$(CONFIG_PPC_MEMTRACE) += memtrace.o
-obj-$(CONFIG_PPC_VAS) += vas.o vas-window.o vas-debug.o vas-fault.o
+obj-$(CONFIG_PPC_VAS) += vas.o vas-window.o vas-debug.o vas-fault.o vas-api.o
obj-$(CONFIG_OCXL_BASE) += ocxl.o
obj-$(CONFIG_SCOM_DEBUGFS) += opal-xscom.o
obj-$(CONFIG_PPC_SECURE_BOOT) += opal-secvar.o
diff --git a/arch/powerpc/platforms/powernv/vas-api.c b/arch/powerpc/platforms/powernv/vas-api.c
new file mode 100644
index 0000000..d72755c
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/vas-api.c
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * VAS user space API for its accelerators (Only NX-GZIP is supported now)
+ * Copyright (C) 2019 Haren Myneni, IBM Corp
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <asm/vas.h>
+#include <uapi/asm/vas-api.h>
+#include "vas.h"
+
+/*
+ * The driver creates the device node that can be used as follows:
+ * For NX-GZIP
+ *
+ * fd = open("/dev/crypto/nx-gzip", O_RDWR);
+ * rc = ioctl(fd, VAS_TX_WIN_OPEN, &attr);
+ * paste_addr = mmap(NULL, PAGE_SIZE, prot, MAP_SHARED, fd, 0ULL).
+ * vas_copy(&crb, 0, 1);
+ * vas_paste(paste_addr, 0, 1);
+ * close(fd) or exit process to close window.
+ *
+ * where "vas_copy" and "vas_paste" are defined in copy-paste.h.
+ * copy/paste returns to the user space directly. So refer NX hardware
+ * documententation for excat copy/paste usage and completion / error
+ * conditions.
+ */
+
+static char *coproc_dev_name = "nx-gzip";
+static atomic_t coproc_instid = ATOMIC_INIT(0);
+
+/*
+ * Wrapper object for the nx-gzip device - there is just one instance of
+ * this node for the whole system.
+ */
+struct coproc_dev {
+ struct cdev cdev;
+ struct device *device;
+ char *name;
+ dev_t devt;
+ struct class *class;
+} coproc_device;
+
+/*
+ * One instance per open of a nx-gzip device. Each coproc_instance is
+ * associated with a VAS window after the caller issues
+ * VAS_GZIP_TX_WIN_OPEN ioctl.
+ */
+struct coproc_instance {
+ int id;
+ struct vas_window *txwin;
+};
+
+static char *coproc_devnode(struct device *dev, umode_t *mode)
+{
+ return kasprintf(GFP_KERNEL, "crypto/%s", dev_name(dev));
+}
+
+static int coproc_open(struct inode *inode, struct file *fp)
+{
+ struct coproc_instance *instance;
+
+ instance = kzalloc(sizeof(*instance), GFP_KERNEL);
+ if (!instance)
+ return -ENOMEM;
+
+ instance->id = atomic_inc_return(&coproc_instid);
+
+ fp->private_data = instance;
+ return 0;
+}
+
+static int coproc_ioc_tx_win_open(struct file *fp, unsigned long arg)
+{
+ int rc, vasid;
+ struct vas_tx_win_attr txattr;
+ struct vas_tx_win_open_attr uattr;
+ void __user *uptr = (void *)arg;
+ struct vas_window *txwin;
+ struct coproc_instance *nxti = fp->private_data;
+
+ if (!nxti)
+ return -EINVAL;
+
+ /*
+ * One window for file descriptor
+ */
+ if (nxti->txwin)
+ return -EEXIST;
+
+ rc = copy_from_user(&uattr, uptr, sizeof(uattr));
+ if (rc) {
+ pr_err("%s(): copy_from_user() returns %d\n", __func__, rc);
+ return -EFAULT;
+ }
+
+ if (uattr.version != 1) {
+ pr_err("Invalid version\n");
+ return -EINVAL;
+ }
+
+ vasid = uattr.vas_id;
+
+ memset(&txattr, 0, sizeof(struct vas_tx_win_attr));
+ vas_init_tx_win_attr(&txattr, VAS_COP_TYPE_GZIP);
+
+ txattr.lpid = mfspr(SPRN_LPID);
+ txattr.pidr = mfspr(SPRN_PID);
+ txattr.user_win = true;
+ txattr.rsvd_txbuf_count = false;
+ txattr.pswid = false;
+ /*
+ * txattr.wcreds_max is set to VAS_WCREDS_DEFAULT (1024) in
+ * vas-window.c, but can be changed specific to GZIP depends
+ * on user space need.
+ * If needed to set txattr.wcreds_max here.
+ */
+
+ pr_devel("Pid %d: Opening txwin, PIDR %ld\n", txattr.pidr,
+ mfspr(SPRN_PID));
+
+ txwin = vas_tx_win_open(vasid, VAS_COP_TYPE_GZIP, &txattr);
+ if (IS_ERR(txwin)) {
+ pr_err("%s() vas_tx_win_open() failed, %ld\n", __func__,
+ PTR_ERR(txwin));
+ return PTR_ERR(txwin);
+ }
+
+ nxti->txwin = txwin;
+
+ return 0;
+}
+
+static int coproc_release(struct inode *inode, struct file *fp)
+{
+ struct coproc_instance *instance;
+
+ instance = fp->private_data;
+
+ if (instance && instance->txwin) {
+ vas_win_close(instance->txwin);
+ instance->txwin = NULL;
+ }
+
+ /*
+ * We don't know here if user has other receive windows
+ * open, so we can't really call clear_thread_tidr().
+ * So, once the process calls set_thread_tidr(), the
+ * TIDR value sticks around until process exits, resulting
+ * in an extra copy in restore_sprs().
+ */
+
+ kfree(instance);
+ fp->private_data = NULL;
+ atomic_dec(&coproc_instid);
+
+ return 0;
+}
+
+static int coproc_mmap(struct file *fp, struct vm_area_struct *vma)
+{
+ int rc;
+ pgprot_t prot;
+ u64 paste_addr;
+ unsigned long pfn;
+ struct coproc_instance *instance = fp->private_data;
+
+ if ((vma->vm_end - vma->vm_start) > PAGE_SIZE) {
+ pr_debug("%s(): size 0x%zx, PAGE_SIZE 0x%zx\n", __func__,
+ (vma->vm_end - vma->vm_start), PAGE_SIZE);
+ return -EINVAL;
+ }
+
+ /* Ensure instance has an open send window */
+ if (!instance->txwin) {
+ pr_err("%s(): No send window open?\n", __func__);
+ return -EINVAL;
+ }
+
+ vas_win_paste_addr(instance->txwin, &paste_addr, NULL);
+ pfn = paste_addr >> PAGE_SHIFT;
+
+ /* flags, page_prot from cxl_mmap(), except we want cachable */
+ vma->vm_flags |= VM_IO | VM_PFNMAP;
+ vma->vm_page_prot = pgprot_cached(vma->vm_page_prot);
+
+ prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_DIRTY);
+
+ rc = remap_pfn_range(vma, vma->vm_start, pfn + vma->vm_pgoff,
+ vma->vm_end - vma->vm_start, prot);
+
+ pr_devel("%s(): paste addr %llx at %lx, rc %d\n", __func__,
+ paste_addr, vma->vm_start, rc);
+
+ return rc;
+}
+
+static long coproc_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
+{
+ switch (cmd) {
+ case VAS_TX_WIN_OPEN:
+ return coproc_ioc_tx_win_open(fp, arg);
+ default:
+ return -EINVAL;
+ }
+}
+
+struct file_operations coproc_fops = {
+ .open = coproc_open,
+ .release = coproc_release,
+ .mmap = coproc_mmap,
+ .unlocked_ioctl = coproc_ioctl,
+};
+
+/*
+ * Supporting only nx-gzip coprocessor type now, but this API code
+ * extended to other coprocessor types later.
+ */
+int vas_register_coproc_api(struct module *mod)
+{
+ int rc = -EINVAL;
+ dev_t devno;
+
+ rc = alloc_chrdev_region(&coproc_device.devt, 1, 1, "nx-gzip");
+ if (rc) {
+ pr_err("Unable to allocate coproc major number: %i\n", rc);
+ return rc;
+ }
+
+ pr_devel("NX-GZIP device allocated, dev [%i,%i]\n",
+ MAJOR(coproc_device.devt), MINOR(coproc_device.devt));
+
+ coproc_device.class = class_create(mod, "nx-gzip");
+ if (IS_ERR(coproc_device.class)) {
+ rc = PTR_ERR(coproc_device.class);
+ pr_err("Unable to create NX-GZIP class %d\n", rc);
+ goto err_class;
+ }
+ coproc_device.class->devnode = coproc_devnode;
+
+ coproc_fops.owner = mod;
+ cdev_init(&coproc_device.cdev, &coproc_fops);
+
+ devno = MKDEV(MAJOR(coproc_device.devt), 0);
+ rc = cdev_add(&coproc_device.cdev, devno, 1);
+ if (rc) {
+ pr_err("cdev_add() failed %d\n", rc);
+ goto err_cdev;
+ }
+
+ coproc_device.device = device_create(coproc_device.class, NULL,
+ devno, NULL, coproc_dev_name, MINOR(devno));
+ if (IS_ERR(coproc_device.device)) {
+ rc = PTR_ERR(coproc_device.device);
+ pr_err("Unable to create coproc-%d %d\n", MINOR(devno), rc);
+ goto err;
+ }
+
+ pr_devel("%s: Added dev [%d,%d]\n", __func__, MAJOR(devno),
+ MINOR(devno));
+
+ return 0;
+
+err:
+ cdev_del(&coproc_device.cdev);
+err_cdev:
+ class_destroy(coproc_device.class);
+err_class:
+ unregister_chrdev_region(coproc_device.devt, 1);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(vas_register_coproc_api);
+
+void vas_unregister_coproc_api(void)
+{
+ dev_t devno;
+
+ cdev_del(&coproc_device.cdev);
+ devno = MKDEV(MAJOR(coproc_device.devt), 0);
+ device_destroy(coproc_device.class, devno);
+
+ class_destroy(coproc_device.class);
+ unregister_chrdev_region(coproc_device.devt, 1);
+}
+EXPORT_SYMBOL_GPL(vas_unregister_coproc_api);
diff --git a/arch/powerpc/platforms/powernv/vas-window.c b/arch/powerpc/platforms/powernv/vas-window.c
index b6572af..d4a575e 100644
--- a/arch/powerpc/platforms/powernv/vas-window.c
+++ b/arch/powerpc/platforms/powernv/vas-window.c
@@ -26,7 +26,7 @@
* Compute the paste address region for the window @window using the
* ->paste_base_addr and ->paste_win_id_shift we got from device tree.
*/
-static void compute_paste_address(struct vas_window *window, u64 *addr, int *len)
+void vas_win_paste_addr(struct vas_window *window, u64 *addr, int *len)
{
int winid;
u64 base, shift;
@@ -80,7 +80,7 @@ static void *map_paste_region(struct vas_window *txwin)
goto free_name;
txwin->paste_addr_name = name;
- compute_paste_address(txwin, &start, &len);
+ vas_win_paste_addr(txwin, &start, &len);
if (!request_mem_region(start, len, name)) {
pr_devel("%s(): request_mem_region(0x%llx, %d) failed\n",
@@ -138,7 +138,7 @@ static void unmap_paste_region(struct vas_window *window)
u64 busaddr_start;
if (window->paste_kaddr) {
- compute_paste_address(window, &busaddr_start, &len);
+ vas_win_paste_addr(window, &busaddr_start, &len);
unmap_region(window->paste_kaddr, busaddr_start, len);
window->paste_kaddr = NULL;
kfree(window->paste_addr_name);
diff --git a/arch/powerpc/platforms/powernv/vas.h b/arch/powerpc/platforms/powernv/vas.h
index 495937a..96efb99 100644
--- a/arch/powerpc/platforms/powernv/vas.h
+++ b/arch/powerpc/platforms/powernv/vas.h
@@ -418,6 +418,8 @@ struct vas_winctx {
extern void vas_return_credit(struct vas_window *window, bool tx);
extern struct vas_window *vas_pswid_to_window(struct vas_instance *vinst,
uint32_t pswid);
+extern void vas_win_paste_addr(struct vas_window *window, u64 *addr,
+ int *len);
static inline int vas_window_pid(struct vas_window *window)
{
--
1.8.3.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V2 5/9] crypto/nx: Rename nx-842-powernv file name to nx-common-powernv
2020-02-29 11:04 [PATCH V2 0/9] crypto/nx: Enable GZIP engine and provide userpace API Haren Myneni
` (3 preceding siblings ...)
2020-02-29 11:15 ` [PATCH V2 4/9] crypto/nx: Initialize coproc entry with kzalloc Haren Myneni
@ 2020-02-29 11:15 ` Haren Myneni
2020-02-29 11:16 ` [PATCH V2 6/9] crypto/nx: Make enable code generic to add new GZIP compression type Haren Myneni
` (3 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Haren Myneni @ 2020-02-29 11:15 UTC (permalink / raw)
To: herbert; +Cc: mpe, mikey, sukadev, linuxppc-dev, linux-crypto, npiggin
Rename nx-842-powernv.c to nx-common-powernv.c to add code for setup
and enable new GZIP compression type. The actual functionality is not
changed in this patch.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
---
drivers/crypto/nx/Makefile | 2 +-
drivers/crypto/nx/nx-842-powernv.c | 1062 ---------------------------------
drivers/crypto/nx/nx-common-powernv.c | 1062 +++++++++++++++++++++++++++++++++
3 files changed, 1063 insertions(+), 1063 deletions(-)
delete mode 100644 drivers/crypto/nx/nx-842-powernv.c
create mode 100644 drivers/crypto/nx/nx-common-powernv.c
diff --git a/drivers/crypto/nx/Makefile b/drivers/crypto/nx/Makefile
index 015155d..bc89a20 100644
--- a/drivers/crypto/nx/Makefile
+++ b/drivers/crypto/nx/Makefile
@@ -15,4 +15,4 @@ obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS_PSERIES) += nx-compress-pseries.o nx-compres
obj-$(CONFIG_CRYPTO_DEV_NX_COMPRESS_POWERNV) += nx-compress-powernv.o nx-compress.o
nx-compress-objs := nx-842.o
nx-compress-pseries-objs := nx-842-pseries.o
-nx-compress-powernv-objs := nx-842-powernv.o
+nx-compress-powernv-objs := nx-common-powernv.o
diff --git a/drivers/crypto/nx/nx-842-powernv.c b/drivers/crypto/nx/nx-842-powernv.c
deleted file mode 100644
index 8e63326..0000000
--- a/drivers/crypto/nx/nx-842-powernv.c
+++ /dev/null
@@ -1,1062 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Driver for IBM PowerNV 842 compression accelerator
- *
- * Copyright (C) 2015 Dan Streetman, IBM Corp
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include "nx-842.h"
-
-#include <linux/timer.h>
-
-#include <asm/prom.h>
-#include <asm/icswx.h>
-#include <asm/vas.h>
-#include <asm/reg.h>
-#include <asm/opal-api.h>
-#include <asm/opal.h>
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Dan Streetman <ddstreet@ieee.org>");
-MODULE_DESCRIPTION("842 H/W Compression driver for IBM PowerNV processors");
-MODULE_ALIAS_CRYPTO("842");
-MODULE_ALIAS_CRYPTO("842-nx");
-
-#define WORKMEM_ALIGN (CRB_ALIGN)
-#define CSB_WAIT_MAX (5000) /* ms */
-#define VAS_RETRIES (10)
-
-struct nx842_workmem {
- /* Below fields must be properly aligned */
- struct coprocessor_request_block crb; /* CRB_ALIGN align */
- struct data_descriptor_entry ddl_in[DDL_LEN_MAX]; /* DDE_ALIGN align */
- struct data_descriptor_entry ddl_out[DDL_LEN_MAX]; /* DDE_ALIGN align */
- /* Above fields must be properly aligned */
-
- ktime_t start;
-
- char padding[WORKMEM_ALIGN]; /* unused, to allow alignment */
-} __packed __aligned(WORKMEM_ALIGN);
-
-struct nx842_coproc {
- unsigned int chip_id;
- unsigned int ct;
- unsigned int ci; /* Coprocessor instance, used with icswx */
- struct {
- struct vas_window *rxwin;
- int id;
- } vas;
- struct list_head list;
-};
-
-/*
- * Send the request to NX engine on the chip for the corresponding CPU
- * where the process is executing. Use with VAS function.
- */
-static DEFINE_PER_CPU(struct vas_window *, cpu_txwin);
-
-/* no cpu hotplug on powernv, so this list never changes after init */
-static LIST_HEAD(nx842_coprocs);
-static unsigned int nx842_ct; /* used in icswx function */
-
-static int (*nx842_powernv_exec)(const unsigned char *in,
- unsigned int inlen, unsigned char *out,
- unsigned int *outlenp, void *workmem, int fc);
-
-/**
- * setup_indirect_dde - Setup an indirect DDE
- *
- * The DDE is setup with the the DDE count, byte count, and address of
- * first direct DDE in the list.
- */
-static void setup_indirect_dde(struct data_descriptor_entry *dde,
- struct data_descriptor_entry *ddl,
- unsigned int dde_count, unsigned int byte_count)
-{
- dde->flags = 0;
- dde->count = dde_count;
- dde->index = 0;
- dde->length = cpu_to_be32(byte_count);
- dde->address = cpu_to_be64(nx842_get_pa(ddl));
-}
-
-/**
- * setup_direct_dde - Setup single DDE from buffer
- *
- * The DDE is setup with the buffer and length. The buffer must be properly
- * aligned. The used length is returned.
- * Returns:
- * N Successfully set up DDE with N bytes
- */
-static unsigned int setup_direct_dde(struct data_descriptor_entry *dde,
- unsigned long pa, unsigned int len)
-{
- unsigned int l = min_t(unsigned int, len, LEN_ON_PAGE(pa));
-
- dde->flags = 0;
- dde->count = 0;
- dde->index = 0;
- dde->length = cpu_to_be32(l);
- dde->address = cpu_to_be64(pa);
-
- return l;
-}
-
-/**
- * setup_ddl - Setup DDL from buffer
- *
- * Returns:
- * 0 Successfully set up DDL
- */
-static int setup_ddl(struct data_descriptor_entry *dde,
- struct data_descriptor_entry *ddl,
- unsigned char *buf, unsigned int len,
- bool in)
-{
- unsigned long pa = nx842_get_pa(buf);
- int i, ret, total_len = len;
-
- if (!IS_ALIGNED(pa, DDE_BUFFER_ALIGN)) {
- pr_debug("%s buffer pa 0x%lx not 0x%x-byte aligned\n",
- in ? "input" : "output", pa, DDE_BUFFER_ALIGN);
- return -EINVAL;
- }
-
- /* only need to check last mult; since buffer must be
- * DDE_BUFFER_ALIGN aligned, and that is a multiple of
- * DDE_BUFFER_SIZE_MULT, and pre-last page DDE buffers
- * are guaranteed a multiple of DDE_BUFFER_SIZE_MULT.
- */
- if (len % DDE_BUFFER_LAST_MULT) {
- pr_debug("%s buffer len 0x%x not a multiple of 0x%x\n",
- in ? "input" : "output", len, DDE_BUFFER_LAST_MULT);
- if (in)
- return -EINVAL;
- len = round_down(len, DDE_BUFFER_LAST_MULT);
- }
-
- /* use a single direct DDE */
- if (len <= LEN_ON_PAGE(pa)) {
- ret = setup_direct_dde(dde, pa, len);
- WARN_ON(ret < len);
- return 0;
- }
-
- /* use the DDL */
- for (i = 0; i < DDL_LEN_MAX && len > 0; i++) {
- ret = setup_direct_dde(&ddl[i], pa, len);
- buf += ret;
- len -= ret;
- pa = nx842_get_pa(buf);
- }
-
- if (len > 0) {
- pr_debug("0x%x total %s bytes 0x%x too many for DDL.\n",
- total_len, in ? "input" : "output", len);
- if (in)
- return -EMSGSIZE;
- total_len -= len;
- }
- setup_indirect_dde(dde, ddl, i, total_len);
-
- return 0;
-}
-
-#define CSB_ERR(csb, msg, ...) \
- pr_err("ERROR: " msg " : %02x %02x %02x %02x %08x\n", \
- ##__VA_ARGS__, (csb)->flags, \
- (csb)->cs, (csb)->cc, (csb)->ce, \
- be32_to_cpu((csb)->count))
-
-#define CSB_ERR_ADDR(csb, msg, ...) \
- CSB_ERR(csb, msg " at %lx", ##__VA_ARGS__, \
- (unsigned long)be64_to_cpu((csb)->address))
-
-/**
- * wait_for_csb
- */
-static int wait_for_csb(struct nx842_workmem *wmem,
- struct coprocessor_status_block *csb)
-{
- ktime_t start = wmem->start, now = ktime_get();
- ktime_t timeout = ktime_add_ms(start, CSB_WAIT_MAX);
-
- while (!(READ_ONCE(csb->flags) & CSB_V)) {
- cpu_relax();
- now = ktime_get();
- if (ktime_after(now, timeout))
- break;
- }
-
- /* hw has updated csb and output buffer */
- barrier();
-
- /* check CSB flags */
- if (!(csb->flags & CSB_V)) {
- CSB_ERR(csb, "CSB still not valid after %ld us, giving up",
- (long)ktime_us_delta(now, start));
- return -ETIMEDOUT;
- }
- if (csb->flags & CSB_F) {
- CSB_ERR(csb, "Invalid CSB format");
- return -EPROTO;
- }
- if (csb->flags & CSB_CH) {
- CSB_ERR(csb, "Invalid CSB chaining state");
- return -EPROTO;
- }
-
- /* verify CSB completion sequence is 0 */
- if (csb->cs) {
- CSB_ERR(csb, "Invalid CSB completion sequence");
- return -EPROTO;
- }
-
- /* check CSB Completion Code */
- switch (csb->cc) {
- /* no error */
- case CSB_CC_SUCCESS:
- break;
- case CSB_CC_TPBC_GT_SPBC:
- /* not an error, but the compressed data is
- * larger than the uncompressed data :(
- */
- break;
-
- /* input data errors */
- case CSB_CC_OPERAND_OVERLAP:
- /* input and output buffers overlap */
- CSB_ERR(csb, "Operand Overlap error");
- return -EINVAL;
- case CSB_CC_INVALID_OPERAND:
- CSB_ERR(csb, "Invalid operand");
- return -EINVAL;
- case CSB_CC_NOSPC:
- /* output buffer too small */
- return -ENOSPC;
- case CSB_CC_ABORT:
- CSB_ERR(csb, "Function aborted");
- return -EINTR;
- case CSB_CC_CRC_MISMATCH:
- CSB_ERR(csb, "CRC mismatch");
- return -EINVAL;
- case CSB_CC_TEMPL_INVALID:
- CSB_ERR(csb, "Compressed data template invalid");
- return -EINVAL;
- case CSB_CC_TEMPL_OVERFLOW:
- CSB_ERR(csb, "Compressed data template shows data past end");
- return -EINVAL;
- case CSB_CC_EXCEED_BYTE_COUNT: /* P9 or later */
- /*
- * DDE byte count exceeds the limit specified in Maximum
- * byte count register.
- */
- CSB_ERR(csb, "DDE byte count exceeds the limit");
- return -EINVAL;
-
- /* these should not happen */
- case CSB_CC_INVALID_ALIGN:
- /* setup_ddl should have detected this */
- CSB_ERR_ADDR(csb, "Invalid alignment");
- return -EINVAL;
- case CSB_CC_DATA_LENGTH:
- /* setup_ddl should have detected this */
- CSB_ERR(csb, "Invalid data length");
- return -EINVAL;
- case CSB_CC_WR_TRANSLATION:
- case CSB_CC_TRANSLATION:
- case CSB_CC_TRANSLATION_DUP1:
- case CSB_CC_TRANSLATION_DUP2:
- case CSB_CC_TRANSLATION_DUP3:
- case CSB_CC_TRANSLATION_DUP4:
- case CSB_CC_TRANSLATION_DUP5:
- case CSB_CC_TRANSLATION_DUP6:
- /* should not happen, we use physical addrs */
- CSB_ERR_ADDR(csb, "Translation error");
- return -EPROTO;
- case CSB_CC_WR_PROTECTION:
- case CSB_CC_PROTECTION:
- case CSB_CC_PROTECTION_DUP1:
- case CSB_CC_PROTECTION_DUP2:
- case CSB_CC_PROTECTION_DUP3:
- case CSB_CC_PROTECTION_DUP4:
- case CSB_CC_PROTECTION_DUP5:
- case CSB_CC_PROTECTION_DUP6:
- /* should not happen, we use physical addrs */
- CSB_ERR_ADDR(csb, "Protection error");
- return -EPROTO;
- case CSB_CC_PRIVILEGE:
- /* shouldn't happen, we're in HYP mode */
- CSB_ERR(csb, "Insufficient Privilege error");
- return -EPROTO;
- case CSB_CC_EXCESSIVE_DDE:
- /* shouldn't happen, setup_ddl doesn't use many dde's */
- CSB_ERR(csb, "Too many DDEs in DDL");
- return -EINVAL;
- case CSB_CC_TRANSPORT:
- case CSB_CC_INVALID_CRB: /* P9 or later */
- /* shouldn't happen, we setup CRB correctly */
- CSB_ERR(csb, "Invalid CRB");
- return -EINVAL;
- case CSB_CC_INVALID_DDE: /* P9 or later */
- /*
- * shouldn't happen, setup_direct/indirect_dde creates
- * DDE right
- */
- CSB_ERR(csb, "Invalid DDE");
- return -EINVAL;
- case CSB_CC_SEGMENTED_DDL:
- /* shouldn't happen, setup_ddl creates DDL right */
- CSB_ERR(csb, "Segmented DDL error");
- return -EINVAL;
- case CSB_CC_DDE_OVERFLOW:
- /* shouldn't happen, setup_ddl creates DDL right */
- CSB_ERR(csb, "DDE overflow error");
- return -EINVAL;
- case CSB_CC_SESSION:
- /* should not happen with ICSWX */
- CSB_ERR(csb, "Session violation error");
- return -EPROTO;
- case CSB_CC_CHAIN:
- /* should not happen, we don't use chained CRBs */
- CSB_ERR(csb, "Chained CRB error");
- return -EPROTO;
- case CSB_CC_SEQUENCE:
- /* should not happen, we don't use chained CRBs */
- CSB_ERR(csb, "CRB sequence number error");
- return -EPROTO;
- case CSB_CC_UNKNOWN_CODE:
- CSB_ERR(csb, "Unknown subfunction code");
- return -EPROTO;
-
- /* hardware errors */
- case CSB_CC_RD_EXTERNAL:
- case CSB_CC_RD_EXTERNAL_DUP1:
- case CSB_CC_RD_EXTERNAL_DUP2:
- case CSB_CC_RD_EXTERNAL_DUP3:
- CSB_ERR_ADDR(csb, "Read error outside coprocessor");
- return -EPROTO;
- case CSB_CC_WR_EXTERNAL:
- CSB_ERR_ADDR(csb, "Write error outside coprocessor");
- return -EPROTO;
- case CSB_CC_INTERNAL:
- CSB_ERR(csb, "Internal error in coprocessor");
- return -EPROTO;
- case CSB_CC_PROVISION:
- CSB_ERR(csb, "Storage provision error");
- return -EPROTO;
- case CSB_CC_HW:
- CSB_ERR(csb, "Correctable hardware error");
- return -EPROTO;
- case CSB_CC_HW_EXPIRED_TIMER: /* P9 or later */
- CSB_ERR(csb, "Job did not finish within allowed time");
- return -EPROTO;
-
- default:
- CSB_ERR(csb, "Invalid CC %d", csb->cc);
- return -EPROTO;
- }
-
- /* check Completion Extension state */
- if (csb->ce & CSB_CE_TERMINATION) {
- CSB_ERR(csb, "CSB request was terminated");
- return -EPROTO;
- }
- if (csb->ce & CSB_CE_INCOMPLETE) {
- CSB_ERR(csb, "CSB request not complete");
- return -EPROTO;
- }
- if (!(csb->ce & CSB_CE_TPBC)) {
- CSB_ERR(csb, "TPBC not provided, unknown target length");
- return -EPROTO;
- }
-
- /* successful completion */
- pr_debug_ratelimited("Processed %u bytes in %lu us\n",
- be32_to_cpu(csb->count),
- (unsigned long)ktime_us_delta(now, start));
-
- return 0;
-}
-
-static int nx842_config_crb(const unsigned char *in, unsigned int inlen,
- unsigned char *out, unsigned int outlen,
- struct nx842_workmem *wmem)
-{
- struct coprocessor_request_block *crb;
- struct coprocessor_status_block *csb;
- u64 csb_addr;
- int ret;
-
- crb = &wmem->crb;
- csb = &crb->csb;
-
- /* Clear any previous values */
- memset(crb, 0, sizeof(*crb));
-
- /* set up DDLs */
- ret = setup_ddl(&crb->source, wmem->ddl_in,
- (unsigned char *)in, inlen, true);
- if (ret)
- return ret;
-
- ret = setup_ddl(&crb->target, wmem->ddl_out,
- out, outlen, false);
- if (ret)
- return ret;
-
- /* set up CRB's CSB addr */
- csb_addr = nx842_get_pa(csb) & CRB_CSB_ADDRESS;
- csb_addr |= CRB_CSB_AT; /* Addrs are phys */
- crb->csb_addr = cpu_to_be64(csb_addr);
-
- return 0;
-}
-
-/**
- * nx842_exec_icswx - compress/decompress data using the 842 algorithm
- *
- * (De)compression provided by the NX842 coprocessor on IBM PowerNV systems.
- * This compresses or decompresses the provided input buffer into the provided
- * output buffer.
- *
- * Upon return from this function @outlen contains the length of the
- * output data. If there is an error then @outlen will be 0 and an
- * error will be specified by the return code from this function.
- *
- * The @workmem buffer should only be used by one function call at a time.
- *
- * @in: input buffer pointer
- * @inlen: input buffer size
- * @out: output buffer pointer
- * @outlenp: output buffer size pointer
- * @workmem: working memory buffer pointer, size determined by
- * nx842_powernv_driver.workmem_size
- * @fc: function code, see CCW Function Codes in nx-842.h
- *
- * Returns:
- * 0 Success, output of length @outlenp stored in the buffer at @out
- * -ENODEV Hardware unavailable
- * -ENOSPC Output buffer is to small
- * -EMSGSIZE Input buffer too large
- * -EINVAL buffer constraints do not fix nx842_constraints
- * -EPROTO hardware error during operation
- * -ETIMEDOUT hardware did not complete operation in reasonable time
- * -EINTR operation was aborted
- */
-static int nx842_exec_icswx(const unsigned char *in, unsigned int inlen,
- unsigned char *out, unsigned int *outlenp,
- void *workmem, int fc)
-{
- struct coprocessor_request_block *crb;
- struct coprocessor_status_block *csb;
- struct nx842_workmem *wmem;
- int ret;
- u32 ccw;
- unsigned int outlen = *outlenp;
-
- wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN);
-
- *outlenp = 0;
-
- /* shoudn't happen, we don't load without a coproc */
- if (!nx842_ct) {
- pr_err_ratelimited("coprocessor CT is 0");
- return -ENODEV;
- }
-
- ret = nx842_config_crb(in, inlen, out, outlen, wmem);
- if (ret)
- return ret;
-
- crb = &wmem->crb;
- csb = &crb->csb;
-
- /* set up CCW */
- ccw = 0;
- ccw = SET_FIELD(CCW_CT, ccw, nx842_ct);
- ccw = SET_FIELD(CCW_CI_842, ccw, 0); /* use 0 for hw auto-selection */
- ccw = SET_FIELD(CCW_FC_842, ccw, fc);
-
- wmem->start = ktime_get();
-
- /* do ICSWX */
- ret = icswx(cpu_to_be32(ccw), crb);
-
- pr_debug_ratelimited("icswx CR %x ccw %x crb->ccw %x\n", ret,
- (unsigned int)ccw,
- (unsigned int)be32_to_cpu(crb->ccw));
-
- /*
- * NX842 coprocessor sets 3rd bit in CR register with XER[S0].
- * XER[S0] is the integer summary overflow bit which is nothing
- * to do NX. Since this bit can be set with other return values,
- * mask this bit.
- */
- ret &= ~ICSWX_XERS0;
-
- switch (ret) {
- case ICSWX_INITIATED:
- ret = wait_for_csb(wmem, csb);
- break;
- case ICSWX_BUSY:
- pr_debug_ratelimited("842 Coprocessor busy\n");
- ret = -EBUSY;
- break;
- case ICSWX_REJECTED:
- pr_err_ratelimited("ICSWX rejected\n");
- ret = -EPROTO;
- break;
- }
-
- if (!ret)
- *outlenp = be32_to_cpu(csb->count);
-
- return ret;
-}
-
-/**
- * nx842_exec_vas - compress/decompress data using the 842 algorithm
- *
- * (De)compression provided by the NX842 coprocessor on IBM PowerNV systems.
- * This compresses or decompresses the provided input buffer into the provided
- * output buffer.
- *
- * Upon return from this function @outlen contains the length of the
- * output data. If there is an error then @outlen will be 0 and an
- * error will be specified by the return code from this function.
- *
- * The @workmem buffer should only be used by one function call at a time.
- *
- * @in: input buffer pointer
- * @inlen: input buffer size
- * @out: output buffer pointer
- * @outlenp: output buffer size pointer
- * @workmem: working memory buffer pointer, size determined by
- * nx842_powernv_driver.workmem_size
- * @fc: function code, see CCW Function Codes in nx-842.h
- *
- * Returns:
- * 0 Success, output of length @outlenp stored in the buffer
- * at @out
- * -ENODEV Hardware unavailable
- * -ENOSPC Output buffer is to small
- * -EMSGSIZE Input buffer too large
- * -EINVAL buffer constraints do not fix nx842_constraints
- * -EPROTO hardware error during operation
- * -ETIMEDOUT hardware did not complete operation in reasonable time
- * -EINTR operation was aborted
- */
-static int nx842_exec_vas(const unsigned char *in, unsigned int inlen,
- unsigned char *out, unsigned int *outlenp,
- void *workmem, int fc)
-{
- struct coprocessor_request_block *crb;
- struct coprocessor_status_block *csb;
- struct nx842_workmem *wmem;
- struct vas_window *txwin;
- int ret, i = 0;
- u32 ccw;
- unsigned int outlen = *outlenp;
-
- wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN);
-
- *outlenp = 0;
-
- crb = &wmem->crb;
- csb = &crb->csb;
-
- ret = nx842_config_crb(in, inlen, out, outlen, wmem);
- if (ret)
- return ret;
-
- ccw = 0;
- ccw = SET_FIELD(CCW_FC_842, ccw, fc);
- crb->ccw = cpu_to_be32(ccw);
-
- do {
- wmem->start = ktime_get();
- preempt_disable();
- txwin = this_cpu_read(cpu_txwin);
-
- /*
- * VAS copy CRB into L2 cache. Refer <asm/vas.h>.
- * @crb and @offset.
- */
- vas_copy_crb(crb, 0);
-
- /*
- * VAS paste previously copied CRB to NX.
- * @txwin, @offset and @last (must be true).
- */
- ret = vas_paste_crb(txwin, 0, 1);
- preempt_enable();
- /*
- * Retry copy/paste function for VAS failures.
- */
- } while (ret && (i++ < VAS_RETRIES));
-
- if (ret) {
- pr_err_ratelimited("VAS copy/paste failed\n");
- return ret;
- }
-
- ret = wait_for_csb(wmem, csb);
- if (!ret)
- *outlenp = be32_to_cpu(csb->count);
-
- return ret;
-}
-
-/**
- * nx842_powernv_compress - Compress data using the 842 algorithm
- *
- * Compression provided by the NX842 coprocessor on IBM PowerNV systems.
- * The input buffer is compressed and the result is stored in the
- * provided output buffer.
- *
- * Upon return from this function @outlen contains the length of the
- * compressed data. If there is an error then @outlen will be 0 and an
- * error will be specified by the return code from this function.
- *
- * @in: input buffer pointer
- * @inlen: input buffer size
- * @out: output buffer pointer
- * @outlenp: output buffer size pointer
- * @workmem: working memory buffer pointer, size determined by
- * nx842_powernv_driver.workmem_size
- *
- * Returns: see @nx842_powernv_exec()
- */
-static int nx842_powernv_compress(const unsigned char *in, unsigned int inlen,
- unsigned char *out, unsigned int *outlenp,
- void *wmem)
-{
- return nx842_powernv_exec(in, inlen, out, outlenp,
- wmem, CCW_FC_842_COMP_CRC);
-}
-
-/**
- * nx842_powernv_decompress - Decompress data using the 842 algorithm
- *
- * Decompression provided by the NX842 coprocessor on IBM PowerNV systems.
- * The input buffer is decompressed and the result is stored in the
- * provided output buffer.
- *
- * Upon return from this function @outlen contains the length of the
- * decompressed data. If there is an error then @outlen will be 0 and an
- * error will be specified by the return code from this function.
- *
- * @in: input buffer pointer
- * @inlen: input buffer size
- * @out: output buffer pointer
- * @outlenp: output buffer size pointer
- * @workmem: working memory buffer pointer, size determined by
- * nx842_powernv_driver.workmem_size
- *
- * Returns: see @nx842_powernv_exec()
- */
-static int nx842_powernv_decompress(const unsigned char *in, unsigned int inlen,
- unsigned char *out, unsigned int *outlenp,
- void *wmem)
-{
- return nx842_powernv_exec(in, inlen, out, outlenp,
- wmem, CCW_FC_842_DECOMP_CRC);
-}
-
-static inline void nx842_add_coprocs_list(struct nx842_coproc *coproc,
- int chipid)
-{
- coproc->chip_id = chipid;
- INIT_LIST_HEAD(&coproc->list);
- list_add(&coproc->list, &nx842_coprocs);
-}
-
-static struct vas_window *nx842_alloc_txwin(struct nx842_coproc *coproc)
-{
- struct vas_window *txwin = NULL;
- struct vas_tx_win_attr txattr;
-
- /*
- * Kernel requests will be high priority. So open send
- * windows only for high priority RxFIFO entries.
- */
- vas_init_tx_win_attr(&txattr, coproc->ct);
- txattr.lpid = 0; /* lpid is 0 for kernel requests */
- txattr.pid = 0; /* pid is 0 for kernel requests */
-
- /*
- * Open a VAS send window which is used to send request to NX.
- */
- txwin = vas_tx_win_open(coproc->vas.id, coproc->ct, &txattr);
- if (IS_ERR(txwin))
- pr_err("ibm,nx-842: Can not open TX window: %ld\n",
- PTR_ERR(txwin));
-
- return txwin;
-}
-
-/*
- * Identify chip ID for each CPU, open send wndow for the corresponding NX
- * engine and save txwin in percpu cpu_txwin.
- * cpu_txwin is used in copy/paste operation for each compression /
- * decompression request.
- */
-static int nx842_open_percpu_txwins(void)
-{
- struct nx842_coproc *coproc, *n;
- unsigned int i, chip_id;
-
- for_each_possible_cpu(i) {
- struct vas_window *txwin = NULL;
-
- chip_id = cpu_to_chip_id(i);
-
- list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) {
- /*
- * Kernel requests use only high priority FIFOs. So
- * open send windows for these FIFOs.
- */
-
- if (coproc->ct != VAS_COP_TYPE_842_HIPRI)
- continue;
-
- if (coproc->chip_id == chip_id) {
- txwin = nx842_alloc_txwin(coproc);
- if (IS_ERR(txwin))
- return PTR_ERR(txwin);
-
- per_cpu(cpu_txwin, i) = txwin;
- break;
- }
- }
-
- if (!per_cpu(cpu_txwin, i)) {
- /* shouldn't happen, Each chip will have NX engine */
- pr_err("NX engine is not available for CPU %d\n", i);
- return -EINVAL;
- }
- }
-
- return 0;
-}
-
-static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id,
- int vasid, int *ct)
-{
- struct vas_window *rxwin = NULL;
- struct vas_rx_win_attr rxattr;
- struct nx842_coproc *coproc;
- u32 lpid, pid, tid, fifo_size;
- u64 rx_fifo;
- const char *priority;
- int ret;
-
- ret = of_property_read_u64(dn, "rx-fifo-address", &rx_fifo);
- if (ret) {
- pr_err("Missing rx-fifo-address property\n");
- return ret;
- }
-
- ret = of_property_read_u32(dn, "rx-fifo-size", &fifo_size);
- if (ret) {
- pr_err("Missing rx-fifo-size property\n");
- return ret;
- }
-
- ret = of_property_read_u32(dn, "lpid", &lpid);
- if (ret) {
- pr_err("Missing lpid property\n");
- return ret;
- }
-
- ret = of_property_read_u32(dn, "pid", &pid);
- if (ret) {
- pr_err("Missing pid property\n");
- return ret;
- }
-
- ret = of_property_read_u32(dn, "tid", &tid);
- if (ret) {
- pr_err("Missing tid property\n");
- return ret;
- }
-
- ret = of_property_read_string(dn, "priority", &priority);
- if (ret) {
- pr_err("Missing priority property\n");
- return ret;
- }
-
- coproc = kzalloc(sizeof(*coproc), GFP_KERNEL);
- if (!coproc)
- return -ENOMEM;
-
- if (!strcmp(priority, "High"))
- coproc->ct = VAS_COP_TYPE_842_HIPRI;
- else if (!strcmp(priority, "Normal"))
- coproc->ct = VAS_COP_TYPE_842;
- else {
- pr_err("Invalid RxFIFO priority value\n");
- ret = -EINVAL;
- goto err_out;
- }
-
- vas_init_rx_win_attr(&rxattr, coproc->ct);
- rxattr.rx_fifo = (void *)rx_fifo;
- rxattr.rx_fifo_size = fifo_size;
- rxattr.lnotify_lpid = lpid;
- rxattr.lnotify_pid = pid;
- rxattr.lnotify_tid = tid;
- /*
- * Maximum RX window credits can not be more than #CRBs in
- * RxFIFO. Otherwise, can get checkstop if RxFIFO overruns.
- */
- rxattr.wcreds_max = fifo_size / CRB_SIZE;
-
- /*
- * Open a VAS receice window which is used to configure RxFIFO
- * for NX.
- */
- rxwin = vas_rx_win_open(vasid, coproc->ct, &rxattr);
- if (IS_ERR(rxwin)) {
- ret = PTR_ERR(rxwin);
- pr_err("setting RxFIFO with VAS failed: %d\n",
- ret);
- goto err_out;
- }
-
- coproc->vas.rxwin = rxwin;
- coproc->vas.id = vasid;
- nx842_add_coprocs_list(coproc, chip_id);
-
- /*
- * (lpid, pid, tid) combination has to be unique for each
- * coprocessor instance in the system. So to make it
- * unique, skiboot uses coprocessor type such as 842 or
- * GZIP for pid and provides this value to kernel in pid
- * device-tree property.
- */
- *ct = pid;
-
- return 0;
-
-err_out:
- kfree(coproc);
- return ret;
-}
-
-
-static int __init nx842_powernv_probe_vas(struct device_node *pn)
-{
- struct device_node *dn;
- int chip_id, vasid, ret = 0;
- int nx_fifo_found = 0;
- int uninitialized_var(ct);
-
- chip_id = of_get_ibm_chip_id(pn);
- if (chip_id < 0) {
- pr_err("ibm,chip-id missing\n");
- return -EINVAL;
- }
-
- vasid = chip_to_vas_id(chip_id);
- if (vasid < 0) {
- pr_err("Unable to map chip_id %d to vasid\n", chip_id);
- return -EINVAL;
- }
-
- for_each_child_of_node(pn, dn) {
- if (of_device_is_compatible(dn, "ibm,p9-nx-842")) {
- ret = vas_cfg_coproc_info(dn, chip_id, vasid, &ct);
- if (ret) {
- of_node_put(dn);
- return ret;
- }
- nx_fifo_found++;
- }
- }
-
- if (!nx_fifo_found) {
- pr_err("NX842 FIFO nodes are missing\n");
- return -EINVAL;
- }
-
- /*
- * Initialize NX instance for both high and normal priority FIFOs.
- */
- if (opal_check_token(OPAL_NX_COPROC_INIT)) {
- ret = opal_nx_coproc_init(chip_id, ct);
- if (ret) {
- pr_err("Failed to initialize NX for chip(%d): %d\n",
- chip_id, ret);
- ret = opal_error_code(ret);
- }
- } else
- pr_warn("Firmware doesn't support NX initialization\n");
-
- return ret;
-}
-
-static int __init nx842_powernv_probe(struct device_node *dn)
-{
- struct nx842_coproc *coproc;
- unsigned int ct, ci;
- int chip_id;
-
- chip_id = of_get_ibm_chip_id(dn);
- if (chip_id < 0) {
- pr_err("ibm,chip-id missing\n");
- return -EINVAL;
- }
-
- if (of_property_read_u32(dn, "ibm,842-coprocessor-type", &ct)) {
- pr_err("ibm,842-coprocessor-type missing\n");
- return -EINVAL;
- }
-
- if (of_property_read_u32(dn, "ibm,842-coprocessor-instance", &ci)) {
- pr_err("ibm,842-coprocessor-instance missing\n");
- return -EINVAL;
- }
-
- coproc = kzalloc(sizeof(*coproc), GFP_KERNEL);
- if (!coproc)
- return -ENOMEM;
-
- coproc->ct = ct;
- coproc->ci = ci;
- nx842_add_coprocs_list(coproc, chip_id);
-
- pr_info("coprocessor found on chip %d, CT %d CI %d\n", chip_id, ct, ci);
-
- if (!nx842_ct)
- nx842_ct = ct;
- else if (nx842_ct != ct)
- pr_err("NX842 chip %d, CT %d != first found CT %d\n",
- chip_id, ct, nx842_ct);
-
- return 0;
-}
-
-static void nx842_delete_coprocs(void)
-{
- struct nx842_coproc *coproc, *n;
- struct vas_window *txwin;
- int i;
-
- /*
- * close percpu txwins that are opened for the corresponding coproc.
- */
- for_each_possible_cpu(i) {
- txwin = per_cpu(cpu_txwin, i);
- if (txwin)
- vas_win_close(txwin);
-
- per_cpu(cpu_txwin, i) = 0;
- }
-
- list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) {
- if (coproc->vas.rxwin)
- vas_win_close(coproc->vas.rxwin);
-
- list_del(&coproc->list);
- kfree(coproc);
- }
-}
-
-static struct nx842_constraints nx842_powernv_constraints = {
- .alignment = DDE_BUFFER_ALIGN,
- .multiple = DDE_BUFFER_LAST_MULT,
- .minimum = DDE_BUFFER_LAST_MULT,
- .maximum = (DDL_LEN_MAX - 1) * PAGE_SIZE,
-};
-
-static struct nx842_driver nx842_powernv_driver = {
- .name = KBUILD_MODNAME,
- .owner = THIS_MODULE,
- .workmem_size = sizeof(struct nx842_workmem),
- .constraints = &nx842_powernv_constraints,
- .compress = nx842_powernv_compress,
- .decompress = nx842_powernv_decompress,
-};
-
-static int nx842_powernv_crypto_init(struct crypto_tfm *tfm)
-{
- return nx842_crypto_init(tfm, &nx842_powernv_driver);
-}
-
-static struct crypto_alg nx842_powernv_alg = {
- .cra_name = "842",
- .cra_driver_name = "842-nx",
- .cra_priority = 300,
- .cra_flags = CRYPTO_ALG_TYPE_COMPRESS,
- .cra_ctxsize = sizeof(struct nx842_crypto_ctx),
- .cra_module = THIS_MODULE,
- .cra_init = nx842_powernv_crypto_init,
- .cra_exit = nx842_crypto_exit,
- .cra_u = { .compress = {
- .coa_compress = nx842_crypto_compress,
- .coa_decompress = nx842_crypto_decompress } }
-};
-
-static __init int nx842_powernv_init(void)
-{
- struct device_node *dn;
- int ret;
-
- /* verify workmem size/align restrictions */
- BUILD_BUG_ON(WORKMEM_ALIGN % CRB_ALIGN);
- BUILD_BUG_ON(CRB_ALIGN % DDE_ALIGN);
- BUILD_BUG_ON(CRB_SIZE % DDE_ALIGN);
- /* verify buffer size/align restrictions */
- BUILD_BUG_ON(PAGE_SIZE % DDE_BUFFER_ALIGN);
- BUILD_BUG_ON(DDE_BUFFER_ALIGN % DDE_BUFFER_SIZE_MULT);
- BUILD_BUG_ON(DDE_BUFFER_SIZE_MULT % DDE_BUFFER_LAST_MULT);
-
- for_each_compatible_node(dn, NULL, "ibm,power9-nx") {
- ret = nx842_powernv_probe_vas(dn);
- if (ret) {
- nx842_delete_coprocs();
- of_node_put(dn);
- return ret;
- }
- }
-
- if (list_empty(&nx842_coprocs)) {
- for_each_compatible_node(dn, NULL, "ibm,power-nx")
- nx842_powernv_probe(dn);
-
- if (!nx842_ct)
- return -ENODEV;
-
- nx842_powernv_exec = nx842_exec_icswx;
- } else {
- ret = nx842_open_percpu_txwins();
- if (ret) {
- nx842_delete_coprocs();
- return ret;
- }
-
- nx842_powernv_exec = nx842_exec_vas;
- }
-
- ret = crypto_register_alg(&nx842_powernv_alg);
- if (ret) {
- nx842_delete_coprocs();
- return ret;
- }
-
- return 0;
-}
-module_init(nx842_powernv_init);
-
-static void __exit nx842_powernv_exit(void)
-{
- crypto_unregister_alg(&nx842_powernv_alg);
-
- nx842_delete_coprocs();
-}
-module_exit(nx842_powernv_exit);
diff --git a/drivers/crypto/nx/nx-common-powernv.c b/drivers/crypto/nx/nx-common-powernv.c
new file mode 100644
index 0000000..f42881f
--- /dev/null
+++ b/drivers/crypto/nx/nx-common-powernv.c
@@ -0,0 +1,1062 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for IBM PowerNV compression accelerator
+ *
+ * Copyright (C) 2015 Dan Streetman, IBM Corp
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "nx-842.h"
+
+#include <linux/timer.h>
+
+#include <asm/prom.h>
+#include <asm/icswx.h>
+#include <asm/vas.h>
+#include <asm/reg.h>
+#include <asm/opal-api.h>
+#include <asm/opal.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dan Streetman <ddstreet@ieee.org>");
+MODULE_DESCRIPTION("H/W Compression driver for IBM PowerNV processors");
+MODULE_ALIAS_CRYPTO("842");
+MODULE_ALIAS_CRYPTO("842-nx");
+
+#define WORKMEM_ALIGN (CRB_ALIGN)
+#define CSB_WAIT_MAX (5000) /* ms */
+#define VAS_RETRIES (10)
+
+struct nx842_workmem {
+ /* Below fields must be properly aligned */
+ struct coprocessor_request_block crb; /* CRB_ALIGN align */
+ struct data_descriptor_entry ddl_in[DDL_LEN_MAX]; /* DDE_ALIGN align */
+ struct data_descriptor_entry ddl_out[DDL_LEN_MAX]; /* DDE_ALIGN align */
+ /* Above fields must be properly aligned */
+
+ ktime_t start;
+
+ char padding[WORKMEM_ALIGN]; /* unused, to allow alignment */
+} __packed __aligned(WORKMEM_ALIGN);
+
+struct nx842_coproc {
+ unsigned int chip_id;
+ unsigned int ct;
+ unsigned int ci; /* Coprocessor instance, used with icswx */
+ struct {
+ struct vas_window *rxwin;
+ int id;
+ } vas;
+ struct list_head list;
+};
+
+/*
+ * Send the request to NX engine on the chip for the corresponding CPU
+ * where the process is executing. Use with VAS function.
+ */
+static DEFINE_PER_CPU(struct vas_window *, cpu_txwin);
+
+/* no cpu hotplug on powernv, so this list never changes after init */
+static LIST_HEAD(nx842_coprocs);
+static unsigned int nx842_ct; /* used in icswx function */
+
+static int (*nx842_powernv_exec)(const unsigned char *in,
+ unsigned int inlen, unsigned char *out,
+ unsigned int *outlenp, void *workmem, int fc);
+
+/**
+ * setup_indirect_dde - Setup an indirect DDE
+ *
+ * The DDE is setup with the the DDE count, byte count, and address of
+ * first direct DDE in the list.
+ */
+static void setup_indirect_dde(struct data_descriptor_entry *dde,
+ struct data_descriptor_entry *ddl,
+ unsigned int dde_count, unsigned int byte_count)
+{
+ dde->flags = 0;
+ dde->count = dde_count;
+ dde->index = 0;
+ dde->length = cpu_to_be32(byte_count);
+ dde->address = cpu_to_be64(nx842_get_pa(ddl));
+}
+
+/**
+ * setup_direct_dde - Setup single DDE from buffer
+ *
+ * The DDE is setup with the buffer and length. The buffer must be properly
+ * aligned. The used length is returned.
+ * Returns:
+ * N Successfully set up DDE with N bytes
+ */
+static unsigned int setup_direct_dde(struct data_descriptor_entry *dde,
+ unsigned long pa, unsigned int len)
+{
+ unsigned int l = min_t(unsigned int, len, LEN_ON_PAGE(pa));
+
+ dde->flags = 0;
+ dde->count = 0;
+ dde->index = 0;
+ dde->length = cpu_to_be32(l);
+ dde->address = cpu_to_be64(pa);
+
+ return l;
+}
+
+/**
+ * setup_ddl - Setup DDL from buffer
+ *
+ * Returns:
+ * 0 Successfully set up DDL
+ */
+static int setup_ddl(struct data_descriptor_entry *dde,
+ struct data_descriptor_entry *ddl,
+ unsigned char *buf, unsigned int len,
+ bool in)
+{
+ unsigned long pa = nx842_get_pa(buf);
+ int i, ret, total_len = len;
+
+ if (!IS_ALIGNED(pa, DDE_BUFFER_ALIGN)) {
+ pr_debug("%s buffer pa 0x%lx not 0x%x-byte aligned\n",
+ in ? "input" : "output", pa, DDE_BUFFER_ALIGN);
+ return -EINVAL;
+ }
+
+ /* only need to check last mult; since buffer must be
+ * DDE_BUFFER_ALIGN aligned, and that is a multiple of
+ * DDE_BUFFER_SIZE_MULT, and pre-last page DDE buffers
+ * are guaranteed a multiple of DDE_BUFFER_SIZE_MULT.
+ */
+ if (len % DDE_BUFFER_LAST_MULT) {
+ pr_debug("%s buffer len 0x%x not a multiple of 0x%x\n",
+ in ? "input" : "output", len, DDE_BUFFER_LAST_MULT);
+ if (in)
+ return -EINVAL;
+ len = round_down(len, DDE_BUFFER_LAST_MULT);
+ }
+
+ /* use a single direct DDE */
+ if (len <= LEN_ON_PAGE(pa)) {
+ ret = setup_direct_dde(dde, pa, len);
+ WARN_ON(ret < len);
+ return 0;
+ }
+
+ /* use the DDL */
+ for (i = 0; i < DDL_LEN_MAX && len > 0; i++) {
+ ret = setup_direct_dde(&ddl[i], pa, len);
+ buf += ret;
+ len -= ret;
+ pa = nx842_get_pa(buf);
+ }
+
+ if (len > 0) {
+ pr_debug("0x%x total %s bytes 0x%x too many for DDL.\n",
+ total_len, in ? "input" : "output", len);
+ if (in)
+ return -EMSGSIZE;
+ total_len -= len;
+ }
+ setup_indirect_dde(dde, ddl, i, total_len);
+
+ return 0;
+}
+
+#define CSB_ERR(csb, msg, ...) \
+ pr_err("ERROR: " msg " : %02x %02x %02x %02x %08x\n", \
+ ##__VA_ARGS__, (csb)->flags, \
+ (csb)->cs, (csb)->cc, (csb)->ce, \
+ be32_to_cpu((csb)->count))
+
+#define CSB_ERR_ADDR(csb, msg, ...) \
+ CSB_ERR(csb, msg " at %lx", ##__VA_ARGS__, \
+ (unsigned long)be64_to_cpu((csb)->address))
+
+/**
+ * wait_for_csb
+ */
+static int wait_for_csb(struct nx842_workmem *wmem,
+ struct coprocessor_status_block *csb)
+{
+ ktime_t start = wmem->start, now = ktime_get();
+ ktime_t timeout = ktime_add_ms(start, CSB_WAIT_MAX);
+
+ while (!(READ_ONCE(csb->flags) & CSB_V)) {
+ cpu_relax();
+ now = ktime_get();
+ if (ktime_after(now, timeout))
+ break;
+ }
+
+ /* hw has updated csb and output buffer */
+ barrier();
+
+ /* check CSB flags */
+ if (!(csb->flags & CSB_V)) {
+ CSB_ERR(csb, "CSB still not valid after %ld us, giving up",
+ (long)ktime_us_delta(now, start));
+ return -ETIMEDOUT;
+ }
+ if (csb->flags & CSB_F) {
+ CSB_ERR(csb, "Invalid CSB format");
+ return -EPROTO;
+ }
+ if (csb->flags & CSB_CH) {
+ CSB_ERR(csb, "Invalid CSB chaining state");
+ return -EPROTO;
+ }
+
+ /* verify CSB completion sequence is 0 */
+ if (csb->cs) {
+ CSB_ERR(csb, "Invalid CSB completion sequence");
+ return -EPROTO;
+ }
+
+ /* check CSB Completion Code */
+ switch (csb->cc) {
+ /* no error */
+ case CSB_CC_SUCCESS:
+ break;
+ case CSB_CC_TPBC_GT_SPBC:
+ /* not an error, but the compressed data is
+ * larger than the uncompressed data :(
+ */
+ break;
+
+ /* input data errors */
+ case CSB_CC_OPERAND_OVERLAP:
+ /* input and output buffers overlap */
+ CSB_ERR(csb, "Operand Overlap error");
+ return -EINVAL;
+ case CSB_CC_INVALID_OPERAND:
+ CSB_ERR(csb, "Invalid operand");
+ return -EINVAL;
+ case CSB_CC_NOSPC:
+ /* output buffer too small */
+ return -ENOSPC;
+ case CSB_CC_ABORT:
+ CSB_ERR(csb, "Function aborted");
+ return -EINTR;
+ case CSB_CC_CRC_MISMATCH:
+ CSB_ERR(csb, "CRC mismatch");
+ return -EINVAL;
+ case CSB_CC_TEMPL_INVALID:
+ CSB_ERR(csb, "Compressed data template invalid");
+ return -EINVAL;
+ case CSB_CC_TEMPL_OVERFLOW:
+ CSB_ERR(csb, "Compressed data template shows data past end");
+ return -EINVAL;
+ case CSB_CC_EXCEED_BYTE_COUNT: /* P9 or later */
+ /*
+ * DDE byte count exceeds the limit specified in Maximum
+ * byte count register.
+ */
+ CSB_ERR(csb, "DDE byte count exceeds the limit");
+ return -EINVAL;
+
+ /* these should not happen */
+ case CSB_CC_INVALID_ALIGN:
+ /* setup_ddl should have detected this */
+ CSB_ERR_ADDR(csb, "Invalid alignment");
+ return -EINVAL;
+ case CSB_CC_DATA_LENGTH:
+ /* setup_ddl should have detected this */
+ CSB_ERR(csb, "Invalid data length");
+ return -EINVAL;
+ case CSB_CC_WR_TRANSLATION:
+ case CSB_CC_TRANSLATION:
+ case CSB_CC_TRANSLATION_DUP1:
+ case CSB_CC_TRANSLATION_DUP2:
+ case CSB_CC_TRANSLATION_DUP3:
+ case CSB_CC_TRANSLATION_DUP4:
+ case CSB_CC_TRANSLATION_DUP5:
+ case CSB_CC_TRANSLATION_DUP6:
+ /* should not happen, we use physical addrs */
+ CSB_ERR_ADDR(csb, "Translation error");
+ return -EPROTO;
+ case CSB_CC_WR_PROTECTION:
+ case CSB_CC_PROTECTION:
+ case CSB_CC_PROTECTION_DUP1:
+ case CSB_CC_PROTECTION_DUP2:
+ case CSB_CC_PROTECTION_DUP3:
+ case CSB_CC_PROTECTION_DUP4:
+ case CSB_CC_PROTECTION_DUP5:
+ case CSB_CC_PROTECTION_DUP6:
+ /* should not happen, we use physical addrs */
+ CSB_ERR_ADDR(csb, "Protection error");
+ return -EPROTO;
+ case CSB_CC_PRIVILEGE:
+ /* shouldn't happen, we're in HYP mode */
+ CSB_ERR(csb, "Insufficient Privilege error");
+ return -EPROTO;
+ case CSB_CC_EXCESSIVE_DDE:
+ /* shouldn't happen, setup_ddl doesn't use many dde's */
+ CSB_ERR(csb, "Too many DDEs in DDL");
+ return -EINVAL;
+ case CSB_CC_TRANSPORT:
+ case CSB_CC_INVALID_CRB: /* P9 or later */
+ /* shouldn't happen, we setup CRB correctly */
+ CSB_ERR(csb, "Invalid CRB");
+ return -EINVAL;
+ case CSB_CC_INVALID_DDE: /* P9 or later */
+ /*
+ * shouldn't happen, setup_direct/indirect_dde creates
+ * DDE right
+ */
+ CSB_ERR(csb, "Invalid DDE");
+ return -EINVAL;
+ case CSB_CC_SEGMENTED_DDL:
+ /* shouldn't happen, setup_ddl creates DDL right */
+ CSB_ERR(csb, "Segmented DDL error");
+ return -EINVAL;
+ case CSB_CC_DDE_OVERFLOW:
+ /* shouldn't happen, setup_ddl creates DDL right */
+ CSB_ERR(csb, "DDE overflow error");
+ return -EINVAL;
+ case CSB_CC_SESSION:
+ /* should not happen with ICSWX */
+ CSB_ERR(csb, "Session violation error");
+ return -EPROTO;
+ case CSB_CC_CHAIN:
+ /* should not happen, we don't use chained CRBs */
+ CSB_ERR(csb, "Chained CRB error");
+ return -EPROTO;
+ case CSB_CC_SEQUENCE:
+ /* should not happen, we don't use chained CRBs */
+ CSB_ERR(csb, "CRB sequence number error");
+ return -EPROTO;
+ case CSB_CC_UNKNOWN_CODE:
+ CSB_ERR(csb, "Unknown subfunction code");
+ return -EPROTO;
+
+ /* hardware errors */
+ case CSB_CC_RD_EXTERNAL:
+ case CSB_CC_RD_EXTERNAL_DUP1:
+ case CSB_CC_RD_EXTERNAL_DUP2:
+ case CSB_CC_RD_EXTERNAL_DUP3:
+ CSB_ERR_ADDR(csb, "Read error outside coprocessor");
+ return -EPROTO;
+ case CSB_CC_WR_EXTERNAL:
+ CSB_ERR_ADDR(csb, "Write error outside coprocessor");
+ return -EPROTO;
+ case CSB_CC_INTERNAL:
+ CSB_ERR(csb, "Internal error in coprocessor");
+ return -EPROTO;
+ case CSB_CC_PROVISION:
+ CSB_ERR(csb, "Storage provision error");
+ return -EPROTO;
+ case CSB_CC_HW:
+ CSB_ERR(csb, "Correctable hardware error");
+ return -EPROTO;
+ case CSB_CC_HW_EXPIRED_TIMER: /* P9 or later */
+ CSB_ERR(csb, "Job did not finish within allowed time");
+ return -EPROTO;
+
+ default:
+ CSB_ERR(csb, "Invalid CC %d", csb->cc);
+ return -EPROTO;
+ }
+
+ /* check Completion Extension state */
+ if (csb->ce & CSB_CE_TERMINATION) {
+ CSB_ERR(csb, "CSB request was terminated");
+ return -EPROTO;
+ }
+ if (csb->ce & CSB_CE_INCOMPLETE) {
+ CSB_ERR(csb, "CSB request not complete");
+ return -EPROTO;
+ }
+ if (!(csb->ce & CSB_CE_TPBC)) {
+ CSB_ERR(csb, "TPBC not provided, unknown target length");
+ return -EPROTO;
+ }
+
+ /* successful completion */
+ pr_debug_ratelimited("Processed %u bytes in %lu us\n",
+ be32_to_cpu(csb->count),
+ (unsigned long)ktime_us_delta(now, start));
+
+ return 0;
+}
+
+static int nx842_config_crb(const unsigned char *in, unsigned int inlen,
+ unsigned char *out, unsigned int outlen,
+ struct nx842_workmem *wmem)
+{
+ struct coprocessor_request_block *crb;
+ struct coprocessor_status_block *csb;
+ u64 csb_addr;
+ int ret;
+
+ crb = &wmem->crb;
+ csb = &crb->csb;
+
+ /* Clear any previous values */
+ memset(crb, 0, sizeof(*crb));
+
+ /* set up DDLs */
+ ret = setup_ddl(&crb->source, wmem->ddl_in,
+ (unsigned char *)in, inlen, true);
+ if (ret)
+ return ret;
+
+ ret = setup_ddl(&crb->target, wmem->ddl_out,
+ out, outlen, false);
+ if (ret)
+ return ret;
+
+ /* set up CRB's CSB addr */
+ csb_addr = nx842_get_pa(csb) & CRB_CSB_ADDRESS;
+ csb_addr |= CRB_CSB_AT; /* Addrs are phys */
+ crb->csb_addr = cpu_to_be64(csb_addr);
+
+ return 0;
+}
+
+/**
+ * nx842_exec_icswx - compress/decompress data using the 842 algorithm
+ *
+ * (De)compression provided by the NX842 coprocessor on IBM PowerNV systems.
+ * This compresses or decompresses the provided input buffer into the provided
+ * output buffer.
+ *
+ * Upon return from this function @outlen contains the length of the
+ * output data. If there is an error then @outlen will be 0 and an
+ * error will be specified by the return code from this function.
+ *
+ * The @workmem buffer should only be used by one function call at a time.
+ *
+ * @in: input buffer pointer
+ * @inlen: input buffer size
+ * @out: output buffer pointer
+ * @outlenp: output buffer size pointer
+ * @workmem: working memory buffer pointer, size determined by
+ * nx842_powernv_driver.workmem_size
+ * @fc: function code, see CCW Function Codes in nx-842.h
+ *
+ * Returns:
+ * 0 Success, output of length @outlenp stored in the buffer at @out
+ * -ENODEV Hardware unavailable
+ * -ENOSPC Output buffer is to small
+ * -EMSGSIZE Input buffer too large
+ * -EINVAL buffer constraints do not fix nx842_constraints
+ * -EPROTO hardware error during operation
+ * -ETIMEDOUT hardware did not complete operation in reasonable time
+ * -EINTR operation was aborted
+ */
+static int nx842_exec_icswx(const unsigned char *in, unsigned int inlen,
+ unsigned char *out, unsigned int *outlenp,
+ void *workmem, int fc)
+{
+ struct coprocessor_request_block *crb;
+ struct coprocessor_status_block *csb;
+ struct nx842_workmem *wmem;
+ int ret;
+ u32 ccw;
+ unsigned int outlen = *outlenp;
+
+ wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN);
+
+ *outlenp = 0;
+
+ /* shoudn't happen, we don't load without a coproc */
+ if (!nx842_ct) {
+ pr_err_ratelimited("coprocessor CT is 0");
+ return -ENODEV;
+ }
+
+ ret = nx842_config_crb(in, inlen, out, outlen, wmem);
+ if (ret)
+ return ret;
+
+ crb = &wmem->crb;
+ csb = &crb->csb;
+
+ /* set up CCW */
+ ccw = 0;
+ ccw = SET_FIELD(CCW_CT, ccw, nx842_ct);
+ ccw = SET_FIELD(CCW_CI_842, ccw, 0); /* use 0 for hw auto-selection */
+ ccw = SET_FIELD(CCW_FC_842, ccw, fc);
+
+ wmem->start = ktime_get();
+
+ /* do ICSWX */
+ ret = icswx(cpu_to_be32(ccw), crb);
+
+ pr_debug_ratelimited("icswx CR %x ccw %x crb->ccw %x\n", ret,
+ (unsigned int)ccw,
+ (unsigned int)be32_to_cpu(crb->ccw));
+
+ /*
+ * NX842 coprocessor sets 3rd bit in CR register with XER[S0].
+ * XER[S0] is the integer summary overflow bit which is nothing
+ * to do NX. Since this bit can be set with other return values,
+ * mask this bit.
+ */
+ ret &= ~ICSWX_XERS0;
+
+ switch (ret) {
+ case ICSWX_INITIATED:
+ ret = wait_for_csb(wmem, csb);
+ break;
+ case ICSWX_BUSY:
+ pr_debug_ratelimited("842 Coprocessor busy\n");
+ ret = -EBUSY;
+ break;
+ case ICSWX_REJECTED:
+ pr_err_ratelimited("ICSWX rejected\n");
+ ret = -EPROTO;
+ break;
+ }
+
+ if (!ret)
+ *outlenp = be32_to_cpu(csb->count);
+
+ return ret;
+}
+
+/**
+ * nx842_exec_vas - compress/decompress data using the 842 algorithm
+ *
+ * (De)compression provided by the NX842 coprocessor on IBM PowerNV systems.
+ * This compresses or decompresses the provided input buffer into the provided
+ * output buffer.
+ *
+ * Upon return from this function @outlen contains the length of the
+ * output data. If there is an error then @outlen will be 0 and an
+ * error will be specified by the return code from this function.
+ *
+ * The @workmem buffer should only be used by one function call at a time.
+ *
+ * @in: input buffer pointer
+ * @inlen: input buffer size
+ * @out: output buffer pointer
+ * @outlenp: output buffer size pointer
+ * @workmem: working memory buffer pointer, size determined by
+ * nx842_powernv_driver.workmem_size
+ * @fc: function code, see CCW Function Codes in nx-842.h
+ *
+ * Returns:
+ * 0 Success, output of length @outlenp stored in the buffer
+ * at @out
+ * -ENODEV Hardware unavailable
+ * -ENOSPC Output buffer is to small
+ * -EMSGSIZE Input buffer too large
+ * -EINVAL buffer constraints do not fix nx842_constraints
+ * -EPROTO hardware error during operation
+ * -ETIMEDOUT hardware did not complete operation in reasonable time
+ * -EINTR operation was aborted
+ */
+static int nx842_exec_vas(const unsigned char *in, unsigned int inlen,
+ unsigned char *out, unsigned int *outlenp,
+ void *workmem, int fc)
+{
+ struct coprocessor_request_block *crb;
+ struct coprocessor_status_block *csb;
+ struct nx842_workmem *wmem;
+ struct vas_window *txwin;
+ int ret, i = 0;
+ u32 ccw;
+ unsigned int outlen = *outlenp;
+
+ wmem = PTR_ALIGN(workmem, WORKMEM_ALIGN);
+
+ *outlenp = 0;
+
+ crb = &wmem->crb;
+ csb = &crb->csb;
+
+ ret = nx842_config_crb(in, inlen, out, outlen, wmem);
+ if (ret)
+ return ret;
+
+ ccw = 0;
+ ccw = SET_FIELD(CCW_FC_842, ccw, fc);
+ crb->ccw = cpu_to_be32(ccw);
+
+ do {
+ wmem->start = ktime_get();
+ preempt_disable();
+ txwin = this_cpu_read(cpu_txwin);
+
+ /*
+ * VAS copy CRB into L2 cache. Refer <asm/vas.h>.
+ * @crb and @offset.
+ */
+ vas_copy_crb(crb, 0);
+
+ /*
+ * VAS paste previously copied CRB to NX.
+ * @txwin, @offset and @last (must be true).
+ */
+ ret = vas_paste_crb(txwin, 0, 1);
+ preempt_enable();
+ /*
+ * Retry copy/paste function for VAS failures.
+ */
+ } while (ret && (i++ < VAS_RETRIES));
+
+ if (ret) {
+ pr_err_ratelimited("VAS copy/paste failed\n");
+ return ret;
+ }
+
+ ret = wait_for_csb(wmem, csb);
+ if (!ret)
+ *outlenp = be32_to_cpu(csb->count);
+
+ return ret;
+}
+
+/**
+ * nx842_powernv_compress - Compress data using the 842 algorithm
+ *
+ * Compression provided by the NX842 coprocessor on IBM PowerNV systems.
+ * The input buffer is compressed and the result is stored in the
+ * provided output buffer.
+ *
+ * Upon return from this function @outlen contains the length of the
+ * compressed data. If there is an error then @outlen will be 0 and an
+ * error will be specified by the return code from this function.
+ *
+ * @in: input buffer pointer
+ * @inlen: input buffer size
+ * @out: output buffer pointer
+ * @outlenp: output buffer size pointer
+ * @workmem: working memory buffer pointer, size determined by
+ * nx842_powernv_driver.workmem_size
+ *
+ * Returns: see @nx842_powernv_exec()
+ */
+static int nx842_powernv_compress(const unsigned char *in, unsigned int inlen,
+ unsigned char *out, unsigned int *outlenp,
+ void *wmem)
+{
+ return nx842_powernv_exec(in, inlen, out, outlenp,
+ wmem, CCW_FC_842_COMP_CRC);
+}
+
+/**
+ * nx842_powernv_decompress - Decompress data using the 842 algorithm
+ *
+ * Decompression provided by the NX842 coprocessor on IBM PowerNV systems.
+ * The input buffer is decompressed and the result is stored in the
+ * provided output buffer.
+ *
+ * Upon return from this function @outlen contains the length of the
+ * decompressed data. If there is an error then @outlen will be 0 and an
+ * error will be specified by the return code from this function.
+ *
+ * @in: input buffer pointer
+ * @inlen: input buffer size
+ * @out: output buffer pointer
+ * @outlenp: output buffer size pointer
+ * @workmem: working memory buffer pointer, size determined by
+ * nx842_powernv_driver.workmem_size
+ *
+ * Returns: see @nx842_powernv_exec()
+ */
+static int nx842_powernv_decompress(const unsigned char *in, unsigned int inlen,
+ unsigned char *out, unsigned int *outlenp,
+ void *wmem)
+{
+ return nx842_powernv_exec(in, inlen, out, outlenp,
+ wmem, CCW_FC_842_DECOMP_CRC);
+}
+
+static inline void nx842_add_coprocs_list(struct nx842_coproc *coproc,
+ int chipid)
+{
+ coproc->chip_id = chipid;
+ INIT_LIST_HEAD(&coproc->list);
+ list_add(&coproc->list, &nx842_coprocs);
+}
+
+static struct vas_window *nx842_alloc_txwin(struct nx842_coproc *coproc)
+{
+ struct vas_window *txwin = NULL;
+ struct vas_tx_win_attr txattr;
+
+ /*
+ * Kernel requests will be high priority. So open send
+ * windows only for high priority RxFIFO entries.
+ */
+ vas_init_tx_win_attr(&txattr, coproc->ct);
+ txattr.lpid = 0; /* lpid is 0 for kernel requests */
+ txattr.pid = 0; /* pid is 0 for kernel requests */
+
+ /*
+ * Open a VAS send window which is used to send request to NX.
+ */
+ txwin = vas_tx_win_open(coproc->vas.id, coproc->ct, &txattr);
+ if (IS_ERR(txwin))
+ pr_err("ibm,nx-842: Can not open TX window: %ld\n",
+ PTR_ERR(txwin));
+
+ return txwin;
+}
+
+/*
+ * Identify chip ID for each CPU, open send wndow for the corresponding NX
+ * engine and save txwin in percpu cpu_txwin.
+ * cpu_txwin is used in copy/paste operation for each compression /
+ * decompression request.
+ */
+static int nx842_open_percpu_txwins(void)
+{
+ struct nx842_coproc *coproc, *n;
+ unsigned int i, chip_id;
+
+ for_each_possible_cpu(i) {
+ struct vas_window *txwin = NULL;
+
+ chip_id = cpu_to_chip_id(i);
+
+ list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) {
+ /*
+ * Kernel requests use only high priority FIFOs. So
+ * open send windows for these FIFOs.
+ */
+
+ if (coproc->ct != VAS_COP_TYPE_842_HIPRI)
+ continue;
+
+ if (coproc->chip_id == chip_id) {
+ txwin = nx842_alloc_txwin(coproc);
+ if (IS_ERR(txwin))
+ return PTR_ERR(txwin);
+
+ per_cpu(cpu_txwin, i) = txwin;
+ break;
+ }
+ }
+
+ if (!per_cpu(cpu_txwin, i)) {
+ /* shouldn't happen, Each chip will have NX engine */
+ pr_err("NX engine is not available for CPU %d\n", i);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id,
+ int vasid, int *ct)
+{
+ struct vas_window *rxwin = NULL;
+ struct vas_rx_win_attr rxattr;
+ struct nx842_coproc *coproc;
+ u32 lpid, pid, tid, fifo_size;
+ u64 rx_fifo;
+ const char *priority;
+ int ret;
+
+ ret = of_property_read_u64(dn, "rx-fifo-address", &rx_fifo);
+ if (ret) {
+ pr_err("Missing rx-fifo-address property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(dn, "rx-fifo-size", &fifo_size);
+ if (ret) {
+ pr_err("Missing rx-fifo-size property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(dn, "lpid", &lpid);
+ if (ret) {
+ pr_err("Missing lpid property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(dn, "pid", &pid);
+ if (ret) {
+ pr_err("Missing pid property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(dn, "tid", &tid);
+ if (ret) {
+ pr_err("Missing tid property\n");
+ return ret;
+ }
+
+ ret = of_property_read_string(dn, "priority", &priority);
+ if (ret) {
+ pr_err("Missing priority property\n");
+ return ret;
+ }
+
+ coproc = kzalloc(sizeof(*coproc), GFP_KERNEL);
+ if (!coproc)
+ return -ENOMEM;
+
+ if (!strcmp(priority, "High"))
+ coproc->ct = VAS_COP_TYPE_842_HIPRI;
+ else if (!strcmp(priority, "Normal"))
+ coproc->ct = VAS_COP_TYPE_842;
+ else {
+ pr_err("Invalid RxFIFO priority value\n");
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ vas_init_rx_win_attr(&rxattr, coproc->ct);
+ rxattr.rx_fifo = (void *)rx_fifo;
+ rxattr.rx_fifo_size = fifo_size;
+ rxattr.lnotify_lpid = lpid;
+ rxattr.lnotify_pid = pid;
+ rxattr.lnotify_tid = tid;
+ /*
+ * Maximum RX window credits can not be more than #CRBs in
+ * RxFIFO. Otherwise, can get checkstop if RxFIFO overruns.
+ */
+ rxattr.wcreds_max = fifo_size / CRB_SIZE;
+
+ /*
+ * Open a VAS receice window which is used to configure RxFIFO
+ * for NX.
+ */
+ rxwin = vas_rx_win_open(vasid, coproc->ct, &rxattr);
+ if (IS_ERR(rxwin)) {
+ ret = PTR_ERR(rxwin);
+ pr_err("setting RxFIFO with VAS failed: %d\n",
+ ret);
+ goto err_out;
+ }
+
+ coproc->vas.rxwin = rxwin;
+ coproc->vas.id = vasid;
+ nx842_add_coprocs_list(coproc, chip_id);
+
+ /*
+ * (lpid, pid, tid) combination has to be unique for each
+ * coprocessor instance in the system. So to make it
+ * unique, skiboot uses coprocessor type such as 842 or
+ * GZIP for pid and provides this value to kernel in pid
+ * device-tree property.
+ */
+ *ct = pid;
+
+ return 0;
+
+err_out:
+ kfree(coproc);
+ return ret;
+}
+
+
+static int __init nx842_powernv_probe_vas(struct device_node *pn)
+{
+ struct device_node *dn;
+ int chip_id, vasid, ret = 0;
+ int nx_fifo_found = 0;
+ int uninitialized_var(ct);
+
+ chip_id = of_get_ibm_chip_id(pn);
+ if (chip_id < 0) {
+ pr_err("ibm,chip-id missing\n");
+ return -EINVAL;
+ }
+
+ vasid = chip_to_vas_id(chip_id);
+ if (vasid < 0) {
+ pr_err("Unable to map chip_id %d to vasid\n", chip_id);
+ return -EINVAL;
+ }
+
+ for_each_child_of_node(pn, dn) {
+ if (of_device_is_compatible(dn, "ibm,p9-nx-842")) {
+ ret = vas_cfg_coproc_info(dn, chip_id, vasid, &ct);
+ if (ret) {
+ of_node_put(dn);
+ return ret;
+ }
+ nx_fifo_found++;
+ }
+ }
+
+ if (!nx_fifo_found) {
+ pr_err("NX842 FIFO nodes are missing\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Initialize NX instance for both high and normal priority FIFOs.
+ */
+ if (opal_check_token(OPAL_NX_COPROC_INIT)) {
+ ret = opal_nx_coproc_init(chip_id, ct);
+ if (ret) {
+ pr_err("Failed to initialize NX for chip(%d): %d\n",
+ chip_id, ret);
+ ret = opal_error_code(ret);
+ }
+ } else
+ pr_warn("Firmware doesn't support NX initialization\n");
+
+ return ret;
+}
+
+static int __init nx842_powernv_probe(struct device_node *dn)
+{
+ struct nx842_coproc *coproc;
+ unsigned int ct, ci;
+ int chip_id;
+
+ chip_id = of_get_ibm_chip_id(dn);
+ if (chip_id < 0) {
+ pr_err("ibm,chip-id missing\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(dn, "ibm,842-coprocessor-type", &ct)) {
+ pr_err("ibm,842-coprocessor-type missing\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(dn, "ibm,842-coprocessor-instance", &ci)) {
+ pr_err("ibm,842-coprocessor-instance missing\n");
+ return -EINVAL;
+ }
+
+ coproc = kzalloc(sizeof(*coproc), GFP_KERNEL);
+ if (!coproc)
+ return -ENOMEM;
+
+ coproc->ct = ct;
+ coproc->ci = ci;
+ nx842_add_coprocs_list(coproc, chip_id);
+
+ pr_info("coprocessor found on chip %d, CT %d CI %d\n", chip_id, ct, ci);
+
+ if (!nx842_ct)
+ nx842_ct = ct;
+ else if (nx842_ct != ct)
+ pr_err("NX842 chip %d, CT %d != first found CT %d\n",
+ chip_id, ct, nx842_ct);
+
+ return 0;
+}
+
+static void nx842_delete_coprocs(void)
+{
+ struct nx842_coproc *coproc, *n;
+ struct vas_window *txwin;
+ int i;
+
+ /*
+ * close percpu txwins that are opened for the corresponding coproc.
+ */
+ for_each_possible_cpu(i) {
+ txwin = per_cpu(cpu_txwin, i);
+ if (txwin)
+ vas_win_close(txwin);
+
+ per_cpu(cpu_txwin, i) = 0;
+ }
+
+ list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) {
+ if (coproc->vas.rxwin)
+ vas_win_close(coproc->vas.rxwin);
+
+ list_del(&coproc->list);
+ kfree(coproc);
+ }
+}
+
+static struct nx842_constraints nx842_powernv_constraints = {
+ .alignment = DDE_BUFFER_ALIGN,
+ .multiple = DDE_BUFFER_LAST_MULT,
+ .minimum = DDE_BUFFER_LAST_MULT,
+ .maximum = (DDL_LEN_MAX - 1) * PAGE_SIZE,
+};
+
+static struct nx842_driver nx842_powernv_driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .workmem_size = sizeof(struct nx842_workmem),
+ .constraints = &nx842_powernv_constraints,
+ .compress = nx842_powernv_compress,
+ .decompress = nx842_powernv_decompress,
+};
+
+static int nx842_powernv_crypto_init(struct crypto_tfm *tfm)
+{
+ return nx842_crypto_init(tfm, &nx842_powernv_driver);
+}
+
+static struct crypto_alg nx842_powernv_alg = {
+ .cra_name = "842",
+ .cra_driver_name = "842-nx",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_COMPRESS,
+ .cra_ctxsize = sizeof(struct nx842_crypto_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_init = nx842_powernv_crypto_init,
+ .cra_exit = nx842_crypto_exit,
+ .cra_u = { .compress = {
+ .coa_compress = nx842_crypto_compress,
+ .coa_decompress = nx842_crypto_decompress } }
+};
+
+static __init int nx842_powernv_init(void)
+{
+ struct device_node *dn;
+ int ret;
+
+ /* verify workmem size/align restrictions */
+ BUILD_BUG_ON(WORKMEM_ALIGN % CRB_ALIGN);
+ BUILD_BUG_ON(CRB_ALIGN % DDE_ALIGN);
+ BUILD_BUG_ON(CRB_SIZE % DDE_ALIGN);
+ /* verify buffer size/align restrictions */
+ BUILD_BUG_ON(PAGE_SIZE % DDE_BUFFER_ALIGN);
+ BUILD_BUG_ON(DDE_BUFFER_ALIGN % DDE_BUFFER_SIZE_MULT);
+ BUILD_BUG_ON(DDE_BUFFER_SIZE_MULT % DDE_BUFFER_LAST_MULT);
+
+ for_each_compatible_node(dn, NULL, "ibm,power9-nx") {
+ ret = nx842_powernv_probe_vas(dn);
+ if (ret) {
+ nx842_delete_coprocs();
+ of_node_put(dn);
+ return ret;
+ }
+ }
+
+ if (list_empty(&nx842_coprocs)) {
+ for_each_compatible_node(dn, NULL, "ibm,power-nx")
+ nx842_powernv_probe(dn);
+
+ if (!nx842_ct)
+ return -ENODEV;
+
+ nx842_powernv_exec = nx842_exec_icswx;
+ } else {
+ ret = nx842_open_percpu_txwins();
+ if (ret) {
+ nx842_delete_coprocs();
+ return ret;
+ }
+
+ nx842_powernv_exec = nx842_exec_vas;
+ }
+
+ ret = crypto_register_alg(&nx842_powernv_alg);
+ if (ret) {
+ nx842_delete_coprocs();
+ return ret;
+ }
+
+ return 0;
+}
+module_init(nx842_powernv_init);
+
+static void __exit nx842_powernv_exit(void)
+{
+ crypto_unregister_alg(&nx842_powernv_alg);
+
+ nx842_delete_coprocs();
+}
+module_exit(nx842_powernv_exit);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V2 6/9] crypto/nx: Make enable code generic to add new GZIP compression type
2020-02-29 11:04 [PATCH V2 0/9] crypto/nx: Enable GZIP engine and provide userpace API Haren Myneni
` (4 preceding siblings ...)
2020-02-29 11:15 ` [PATCH V2 5/9] crypto/nx: Rename nx-842-powernv file name to nx-common-powernv Haren Myneni
@ 2020-02-29 11:16 ` Haren Myneni
2020-02-29 11:17 ` [PATCH V2 7/9] crypto/nx: Enable and setup " Haren Myneni
` (2 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Haren Myneni @ 2020-02-29 11:16 UTC (permalink / raw)
To: herbert; +Cc: mpe, mikey, sukadev, linuxppc-dev, linux-crypto, npiggin
Make setup and enable code generic to support new GZIP compression type.
Changed nx842 reference to nx and moved some code to new functions. The
actual functionality is not changed.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
---
drivers/crypto/nx/nx-common-powernv.c | 159 +++++++++++++++++++++-------------
1 file changed, 100 insertions(+), 59 deletions(-)
diff --git a/drivers/crypto/nx/nx-common-powernv.c b/drivers/crypto/nx/nx-common-powernv.c
index f42881f..1cd4f40 100644
--- a/drivers/crypto/nx/nx-common-powernv.c
+++ b/drivers/crypto/nx/nx-common-powernv.c
@@ -40,9 +40,9 @@ struct nx842_workmem {
char padding[WORKMEM_ALIGN]; /* unused, to allow alignment */
} __packed __aligned(WORKMEM_ALIGN);
-struct nx842_coproc {
+struct nx_coproc {
unsigned int chip_id;
- unsigned int ct;
+ unsigned int ct; /* Can be 842 or GZIP high/normal*/
unsigned int ci; /* Coprocessor instance, used with icswx */
struct {
struct vas_window *rxwin;
@@ -58,9 +58,15 @@ struct nx842_coproc {
static DEFINE_PER_CPU(struct vas_window *, cpu_txwin);
/* no cpu hotplug on powernv, so this list never changes after init */
-static LIST_HEAD(nx842_coprocs);
+static LIST_HEAD(nx_coprocs);
static unsigned int nx842_ct; /* used in icswx function */
+/*
+ * Using same values as in skiboot or coprocessor type representing
+ * in NX workbook.
+ */
+#define NX_CT_842 (3)
+
static int (*nx842_powernv_exec)(const unsigned char *in,
unsigned int inlen, unsigned char *out,
unsigned int *outlenp, void *workmem, int fc);
@@ -666,15 +672,15 @@ static int nx842_powernv_decompress(const unsigned char *in, unsigned int inlen,
wmem, CCW_FC_842_DECOMP_CRC);
}
-static inline void nx842_add_coprocs_list(struct nx842_coproc *coproc,
+static inline void nx_add_coprocs_list(struct nx_coproc *coproc,
int chipid)
{
coproc->chip_id = chipid;
INIT_LIST_HEAD(&coproc->list);
- list_add(&coproc->list, &nx842_coprocs);
+ list_add(&coproc->list, &nx_coprocs);
}
-static struct vas_window *nx842_alloc_txwin(struct nx842_coproc *coproc)
+static struct vas_window *nx_alloc_txwin(struct nx_coproc *coproc)
{
struct vas_window *txwin = NULL;
struct vas_tx_win_attr txattr;
@@ -704,9 +710,9 @@ static struct vas_window *nx842_alloc_txwin(struct nx842_coproc *coproc)
* cpu_txwin is used in copy/paste operation for each compression /
* decompression request.
*/
-static int nx842_open_percpu_txwins(void)
+static int nx_open_percpu_txwins(void)
{
- struct nx842_coproc *coproc, *n;
+ struct nx_coproc *coproc, *n;
unsigned int i, chip_id;
for_each_possible_cpu(i) {
@@ -714,17 +720,18 @@ static int nx842_open_percpu_txwins(void)
chip_id = cpu_to_chip_id(i);
- list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) {
+ list_for_each_entry_safe(coproc, n, &nx_coprocs, list) {
/*
* Kernel requests use only high priority FIFOs. So
* open send windows for these FIFOs.
+ * GZIP is not supported in kernel right now.
*/
if (coproc->ct != VAS_COP_TYPE_842_HIPRI)
continue;
if (coproc->chip_id == chip_id) {
- txwin = nx842_alloc_txwin(coproc);
+ txwin = nx_alloc_txwin(coproc);
if (IS_ERR(txwin))
return PTR_ERR(txwin);
@@ -743,13 +750,28 @@ static int nx842_open_percpu_txwins(void)
return 0;
}
+static int __init nx_set_ct(struct nx_coproc *coproc, const char *priority,
+ int high, int normal)
+{
+ if (!strcmp(priority, "High"))
+ coproc->ct = high;
+ else if (!strcmp(priority, "Normal"))
+ coproc->ct = normal;
+ else {
+ pr_err("Invalid RxFIFO priority value\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id,
- int vasid, int *ct)
+ int vasid, int type, int *ct)
{
struct vas_window *rxwin = NULL;
struct vas_rx_win_attr rxattr;
- struct nx842_coproc *coproc;
u32 lpid, pid, tid, fifo_size;
+ struct nx_coproc *coproc;
u64 rx_fifo;
const char *priority;
int ret;
@@ -794,15 +816,12 @@ static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id,
if (!coproc)
return -ENOMEM;
- if (!strcmp(priority, "High"))
- coproc->ct = VAS_COP_TYPE_842_HIPRI;
- else if (!strcmp(priority, "Normal"))
- coproc->ct = VAS_COP_TYPE_842;
- else {
- pr_err("Invalid RxFIFO priority value\n");
- ret = -EINVAL;
+ if (type == NX_CT_842)
+ ret = nx_set_ct(coproc, priority, VAS_COP_TYPE_842_HIPRI,
+ VAS_COP_TYPE_842);
+
+ if (ret)
goto err_out;
- }
vas_init_rx_win_attr(&rxattr, coproc->ct);
rxattr.rx_fifo = (void *)rx_fifo;
@@ -830,7 +849,7 @@ static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id,
coproc->vas.rxwin = rxwin;
coproc->vas.id = vasid;
- nx842_add_coprocs_list(coproc, chip_id);
+ nx_add_coprocs_list(coproc, chip_id);
/*
* (lpid, pid, tid) combination has to be unique for each
@@ -848,13 +867,43 @@ static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id,
return ret;
}
+static int __init nx_coproc_init(int chip_id, int ct_842)
+{
+ int ret = 0;
-static int __init nx842_powernv_probe_vas(struct device_node *pn)
+ if (opal_check_token(OPAL_NX_COPROC_INIT)) {
+ ret = opal_nx_coproc_init(chip_id, ct_842);
+ if (ret) {
+ ret = opal_error_code(ret);
+ pr_err("Failed to initialize NX for chip(%d): %d\n",
+ chip_id, ret);
+ }
+ } else
+ pr_warn("Firmware doesn't support NX initialization\n");
+
+ return ret;
+}
+
+static int __init find_nx_device_tree(struct device_node *dn, int chip_id,
+ int vasid, int type, char *devname,
+ int *ct)
+{
+ int ret = 0;
+
+ if (of_device_is_compatible(dn, devname)) {
+ ret = vas_cfg_coproc_info(dn, chip_id, vasid, type, ct);
+ if (ret)
+ of_node_put(dn);
+ }
+
+ return ret;
+}
+
+static int __init nx_powernv_probe_vas(struct device_node *pn)
{
- struct device_node *dn;
int chip_id, vasid, ret = 0;
- int nx_fifo_found = 0;
- int uninitialized_var(ct);
+ struct device_node *dn;
+ int ct_842 = 0;
chip_id = of_get_ibm_chip_id(pn);
if (chip_id < 0) {
@@ -869,17 +918,13 @@ static int __init nx842_powernv_probe_vas(struct device_node *pn)
}
for_each_child_of_node(pn, dn) {
- if (of_device_is_compatible(dn, "ibm,p9-nx-842")) {
- ret = vas_cfg_coproc_info(dn, chip_id, vasid, &ct);
- if (ret) {
- of_node_put(dn);
- return ret;
- }
- nx_fifo_found++;
- }
+ ret = find_nx_device_tree(dn, chip_id, vasid, NX_CT_842,
+ "ibm,p9-nx-842", &ct_842);
+ if (ret)
+ return ret;
}
- if (!nx_fifo_found) {
+ if (!ct_842) {
pr_err("NX842 FIFO nodes are missing\n");
return -EINVAL;
}
@@ -887,22 +932,14 @@ static int __init nx842_powernv_probe_vas(struct device_node *pn)
/*
* Initialize NX instance for both high and normal priority FIFOs.
*/
- if (opal_check_token(OPAL_NX_COPROC_INIT)) {
- ret = opal_nx_coproc_init(chip_id, ct);
- if (ret) {
- pr_err("Failed to initialize NX for chip(%d): %d\n",
- chip_id, ret);
- ret = opal_error_code(ret);
- }
- } else
- pr_warn("Firmware doesn't support NX initialization\n");
+ ret = nx_coproc_init(chip_id, ct_842);
return ret;
}
static int __init nx842_powernv_probe(struct device_node *dn)
{
- struct nx842_coproc *coproc;
+ struct nx_coproc *coproc;
unsigned int ct, ci;
int chip_id;
@@ -928,7 +965,7 @@ static int __init nx842_powernv_probe(struct device_node *dn)
coproc->ct = ct;
coproc->ci = ci;
- nx842_add_coprocs_list(coproc, chip_id);
+ nx_add_coprocs_list(coproc, chip_id);
pr_info("coprocessor found on chip %d, CT %d CI %d\n", chip_id, ct, ci);
@@ -941,9 +978,9 @@ static int __init nx842_powernv_probe(struct device_node *dn)
return 0;
}
-static void nx842_delete_coprocs(void)
+static void nx_delete_coprocs(void)
{
- struct nx842_coproc *coproc, *n;
+ struct nx_coproc *coproc, *n;
struct vas_window *txwin;
int i;
@@ -958,7 +995,7 @@ static void nx842_delete_coprocs(void)
per_cpu(cpu_txwin, i) = 0;
}
- list_for_each_entry_safe(coproc, n, &nx842_coprocs, list) {
+ list_for_each_entry_safe(coproc, n, &nx_coprocs, list) {
if (coproc->vas.rxwin)
vas_win_close(coproc->vas.rxwin);
@@ -1002,7 +1039,7 @@ static int nx842_powernv_crypto_init(struct crypto_tfm *tfm)
.coa_decompress = nx842_crypto_decompress } }
};
-static __init int nx842_powernv_init(void)
+static __init int nx_compress_powernv_init(void)
{
struct device_node *dn;
int ret;
@@ -1017,15 +1054,15 @@ static __init int nx842_powernv_init(void)
BUILD_BUG_ON(DDE_BUFFER_SIZE_MULT % DDE_BUFFER_LAST_MULT);
for_each_compatible_node(dn, NULL, "ibm,power9-nx") {
- ret = nx842_powernv_probe_vas(dn);
+ ret = nx_powernv_probe_vas(dn);
if (ret) {
- nx842_delete_coprocs();
+ nx_delete_coprocs();
of_node_put(dn);
return ret;
}
}
- if (list_empty(&nx842_coprocs)) {
+ if (list_empty(&nx_coprocs)) {
for_each_compatible_node(dn, NULL, "ibm,power-nx")
nx842_powernv_probe(dn);
@@ -1034,9 +1071,13 @@ static __init int nx842_powernv_init(void)
nx842_powernv_exec = nx842_exec_icswx;
} else {
- ret = nx842_open_percpu_txwins();
+ /*
+ * GZIP is not supported in kernel right now.
+ * So open tx windows only for 842.
+ */
+ ret = nx_open_percpu_txwins();
if (ret) {
- nx842_delete_coprocs();
+ nx_delete_coprocs();
return ret;
}
@@ -1045,18 +1086,18 @@ static __init int nx842_powernv_init(void)
ret = crypto_register_alg(&nx842_powernv_alg);
if (ret) {
- nx842_delete_coprocs();
+ nx_delete_coprocs();
return ret;
}
return 0;
}
-module_init(nx842_powernv_init);
+module_init(nx_compress_powernv_init);
-static void __exit nx842_powernv_exit(void)
+static void __exit nx_compress_powernv_exit(void)
{
crypto_unregister_alg(&nx842_powernv_alg);
- nx842_delete_coprocs();
+ nx_delete_coprocs();
}
-module_exit(nx842_powernv_exit);
+module_exit(nx_compress_powernv_exit);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 10+ messages in thread