* [PATCH 0/9] imx: add latest Boundary Devices boards support
@ 2016-03-15 10:30 Gary Bisson
[not found] ` <1458037826-19375-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
0 siblings, 1 reply; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 10:30 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Hi all,
This series adds support for the following Boundary Devices boards:
- Nitrogen7 (i.MX7)
- Nitrogen6SX (i.MX6SoloX)
- Nitrogen6QP_MAX (i.MX6QP)
The first patches add display and CAN support to i.MX7 device tree. Those
two features have been successfully tested on the Nitrogen7. Also the support
of CKIL clock has been added in order to use it as slow clock for the WiFi
module.
Then the last 3 patches add some missing configurations in order to fully
support Boundary platforms using imx_v6_v7_defconfig.
All the patches have been applied/tested on top of Shawn's 'for-next' branch.
Here are some remarks/questions that came during testing:
- Is the pxp v4l2 driver being worked on for mainline inclusion?
- Are the ldb modifications for SoloX being worked on for mainline inclusion?
- Is the WM8960 ASoC machine driver being worked on for mainline inclusion?
- When booting the Nitrogen7, there's backtrace due to clk_pllv3_prepare, does
it happen on the sdb too? Note that it doesn't prevent the board to work.
Regards,
Gary
Gary Bisson (9):
ARM: dts: imx7d: add lcdif support
ARM: dts: imx7d: add flexcan support
clk: imx: add ckil clock for i.MX7
ARM: dts: imx: add Boundary Devices Nitrogen7 board
ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board
ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/imx6qp-nitrogen6_max.dts | 55 ++
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 745 ++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d-nitrogen7.dts | 818 +++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d.dtsi | 33 ++
arch/arm/configs/imx_v6_v7_defconfig | 4 +
drivers/clk/imx/clk-imx7d.c | 3 +-
include/dt-bindings/clock/imx7d-clock.h | 3 +-
8 files changed, 1662 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
create mode 100644 arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
create mode 100644 arch/arm/boot/dts/imx7d-nitrogen7.dts
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH 1/9] ARM: dts: imx7d: add lcdif support
[not found] ` <1458037826-19375-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
@ 2016-03-15 10:30 ` Gary Bisson
2016-03-15 10:30 ` [PATCH 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
` (8 subsequent siblings)
9 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 10:30 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Add the device node for the i.MX7 eLCDIF interface.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
arch/arm/boot/dts/imx7d.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index b5a50e0..a768716 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -608,6 +608,17 @@
status = "disabled";
};
+ lcdif: lcdif@30730000 {
+ compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+ reg = <0x30730000 0x10000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>;
+ clock-names = "pix", "axi", "disp_axi";
+ status = "disabled";
+ };
+
pwm1: pwm@30660000 {
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
reg = <0x30660000 0x10000>;
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 2/9] ARM: dts: imx7d: add flexcan support
[not found] ` <1458037826-19375-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-03-15 10:30 ` [PATCH 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
@ 2016-03-15 10:30 ` Gary Bisson
2016-03-15 10:30 ` [PATCH 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
` (7 subsequent siblings)
9 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 10:30 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Add the device nodes for the i.MX7 FlexCAN buses.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
arch/arm/boot/dts/imx7d.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index a768716..c5e47a4 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -930,6 +930,28 @@
fsl,num-rx-queues=<3>;
status = "disabled";
};
+
+ flexcan1: can@30a00000 {
+ compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x30a00000 0x10000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CAN1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ stop-mode = <&gpr 0x10 1 0x10 17>;
+ status = "disabled";
+ };
+
+ flexcan2: can@30a10000 {
+ compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x30a10000 0x10000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CAN2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ stop-mode = <&gpr 0x10 2 0x10 18>;
+ status = "disabled";
+ };
};
};
};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 3/9] clk: imx: add ckil clock for i.MX7
[not found] ` <1458037826-19375-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-03-15 10:30 ` [PATCH 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
2016-03-15 10:30 ` [PATCH 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
@ 2016-03-15 10:30 ` Gary Bisson
2016-03-15 10:30 ` [PATCH 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
` (6 subsequent siblings)
9 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 10:30 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Add the necessary clock to use the ckil on i.MX7.
Inspired from the following patch:
https://github.com/boundarydevices/linux-imx6/commit/b80e8271
Signed-off-by: Troy Kisky <troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
drivers/clk/imx/clk-imx7d.c | 3 ++-
include/dt-bindings/clock/imx7d-clock.h | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index fbb6a8c..7912be8 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -342,7 +342,7 @@ static const char *clko1_sel[] = { "osc", "pll_sys_main_clk",
static const char *clko2_sel[] = { "osc", "pll_sys_main_240m_clk",
"pll_sys_pfd0_392m_clk", "pll_sys_pfd1_166m_clk", "pll_sys_pfd4_clk",
- "pll_audio_main_clk", "pll_video_main_clk", "osc_32k_clk", };
+ "pll_audio_main_clk", "pll_video_main_clk", "ckil", };
static const char *lvds1_sel[] = { "pll_arm_main_clk",
"pll_sys_main_clk", "pll_sys_pfd0_392m_clk", "pll_sys_pfd1_332m_clk",
@@ -382,6 +382,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
clks[IMX7D_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
clks[IMX7D_OSC_24M_CLK] = of_clk_get_by_name(ccm_node, "osc");
+ clks[IMX7D_CKIL] = of_clk_get_by_name(ccm_node, "ckil");
np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-anatop");
base = of_iomap(np, 0);
diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h
index edca8985c..1183347 100644
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
@@ -448,5 +448,6 @@
#define IMX7D_PLL_DRAM_TEST_DIV 435
#define IMX7D_ADC_ROOT_CLK 436
#define IMX7D_CLK_ARM 437
-#define IMX7D_CLK_END 438
+#define IMX7D_CKIL 438
+#define IMX7D_CLK_END 439
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board
[not found] ` <1458037826-19375-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (2 preceding siblings ...)
2016-03-15 10:30 ` [PATCH 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
@ 2016-03-15 10:30 ` Gary Bisson
2016-03-15 10:30 ` [PATCH 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
` (5 subsequent siblings)
9 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 10:30 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Based on i.MX7 Dual with 1GB of RAM.
https://boundarydevices.com/product/nitrogen7/
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx7d-nitrogen7.dts | 818 ++++++++++++++++++++++++++++++++++
2 files changed, 819 insertions(+)
create mode 100644 arch/arm/boot/dts/imx7d-nitrogen7.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 2bfce0f..fd67d8d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -369,6 +369,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
+ imx7d-nitrogen7.dtb \
imx7d-sbc-imx7.dtb \
imx7d-sdb.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
new file mode 100644
index 0000000..a5124d8
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -0,0 +1,818 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7d.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX7 Nitrogen7 Board";
+ compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
+
+ aliases {
+ fb_lcd = &lcdif;
+ t_lcd = &t_lcd;
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ backlight_j9 {
+ compatible = "gpio-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight_j9>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ default-on;
+ };
+
+ backlight_j20 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_otg1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can2_3v3: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "can2-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_vref_1v8: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vref-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_vref_3v3: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_wlan: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+ clock-names = "slow";
+ regulator-name = "reg_wlan";
+ startup-delay-us = <70000>;
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+};
+
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&adc2 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+ <&clks IMX7D_CLKO2_ROOT_DIV>;
+ assigned-clock-parents = <&clks IMX7D_CKIL>;
+ assigned-clock-rates = <0>, <32768>;
+};
+
+&cpu0 {
+ arm-supply = <&sw1a_reg>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+ };
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can2_3v3>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze3000@08 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* use sw1c_reg to align with pfuze100/pfuze200 */
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ rtc@68 {
+ compatible = "rv4162";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_rv4162>;
+ reg = <0x68>;
+ interrupts-extended = <&gpio2 15 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ touch@48 {
+ compatible = "ti,tsc2004";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_tsc2004>;
+ interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ codec: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clock-names = "mclk";
+ wlf,shared-lrclk;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ lcd-supply = <®_vref_3v3>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: lcd-display {
+ bits-per-pixel = <16>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&t_lcd>;
+ t_lcd: t_lcd_default {
+ /* default to Okaya display */
+ clock-frequency = <30000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <48>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <3>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ control-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ uart-has-rs485-half-duplex;
+ rs485-mode = <1>;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vgen3_reg>;
+ bus-width = <4>;
+ fsl,tuning-step = <2>;
+ wakeup-source;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_wlan>;
+ vqmmc-1-8-v;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <8>;
+ fsl,tuning-step = <2>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog1>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>;
+
+ imx7d-nitrogen7 {
+ pinctrl_hog_1: hoggrp-1 {
+ fsl,pins = <
+ MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x5d
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x7d
+ MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x7d
+ >;
+ };
+
+ pinctrl_bt_rfkill: btrfkillgrp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x7d
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
+ MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3
+ MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x3
+ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71
+ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71
+ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x71
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11
+ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11
+ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x71
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11
+ MX7D_PAD_SD3_STROBE__GPIO6_IO10 0x75 /* Reset */
+ >;
+ };
+
+ pinctrl_flash: flashgrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x71
+ MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x71
+ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x7d
+ MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x7d
+ MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x71
+ MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x71
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x7d
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x7d
+ MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x7d
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2_rv4162: i2c2-rv4162grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x7d
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c3_tsc2004: i2c3tsc2004grp {
+ fsl,pins = <
+ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x79
+ MX7D_PAD_SD2_WP__GPIO5_IO10 0x7d
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
+ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_j2: j2grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x7d
+ MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x7d
+ MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x7d
+ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x7d
+ MX7D_PAD_SD1_WP__GPIO5_IO1 0x7d
+ MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x7d
+ MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x7d
+ MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x7d
+ MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x7d
+ MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x7d
+ MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x7d
+ MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x7d
+ MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x7d
+ MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x7d
+ MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x7d
+ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x7d
+ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x7d
+ MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x7d
+ MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x7d
+ MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x7d
+ MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x7d
+ MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x7d
+ MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22 0x7d
+ MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x7d
+ MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20 0x7d
+ MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x7d
+ MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19 0x7d
+ MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x7d
+ MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x7d
+ MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x7d
+ MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x7d
+ MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x7d
+ MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x7d
+ MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x7d
+ MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x7d
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x79
+ MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x79
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7d
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
+ MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x79
+ MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x79
+ MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x79
+ MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x7d
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79
+ MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79
+ MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79
+ MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79
+ >;
+ };
+
+ pinctrl_usbotg2: usbotg2grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x7d
+ MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x75
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x75
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1b
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x59
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x19
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
+ MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x59
+ MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x19
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f
+ MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
+ MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f
+ MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
+ MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
+ >;
+ };
+ };
+};
+
+&iomuxc_lpsr {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_2>;
+
+ imx7d-nitrogen7 {
+ pinctrl_hog_2: hoggrp-2 {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x7d
+ MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x7d
+ >;
+ };
+
+ pinctrl_backlight_j9: backlightj9grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x7d
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x7d
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x7d
+ MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14
+ >;
+ };
+
+ pinctrl_wdog1: wdog1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x75
+ >;
+ };
+ };
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board
[not found] ` <1458037826-19375-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (3 preceding siblings ...)
2016-03-15 10:30 ` [PATCH 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
@ 2016-03-15 10:30 ` Gary Bisson
2016-03-15 10:30 ` [PATCH 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
` (4 subsequent siblings)
9 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 10:30 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Based on i.MX6 Quad Plus with 4GB of RAM.
https://boundarydevices.com/product/nitrogen6max/
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6qp-nitrogen6_max.dts | 55 ++++++++++++++++++++++++++++++
2 files changed, 56 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index fd67d8d..279ec61 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -356,6 +356,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-udoo.dtb \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb \
+ imx6qp-nitrogen6_max.dtb \
imx6qp-sabreauto.dtb \
imx6qp-sabresd.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
new file mode 100644
index 0000000..2dee1d8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-nitrogen6_max.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX Board";
+ compatible = "boundary,imx6qp-nitrogen6_max", "fsl,imx6qp";
+};
+
+&sata {
+ status = "okay";
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
[not found] ` <1458037826-19375-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (4 preceding siblings ...)
2016-03-15 10:30 ` [PATCH 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
@ 2016-03-15 10:30 ` Gary Bisson
[not found] ` <1458037826-19375-7-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-03-15 10:30 ` [PATCH 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
` (3 subsequent siblings)
9 siblings, 1 reply; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 10:30 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Based on i.MX6 SoloX with 1GB of RAM.
https://boundarydevices.com/product/nit6_solox-imx6/
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 745 +++++++++++++++++++++++++++++++
2 files changed, 746 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 279ec61..6a2bbc4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -363,6 +363,7 @@ dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SX) += \
+ imx6sx-nitrogen6sx.dtb \
imx6sx-sabreauto.dtb \
imx6sx-sdb-reva.dtb \
imx6sx-sdb.dtb
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
new file mode 100644
index 0000000..8440890
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -0,0 +1,745 @@
+/*
+ * Copyright (C) 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board";
+ compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx";
+
+ aliases {
+ fb_lcd = &lcdif1;
+ t_lcd = &t_lcd;
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ backlight_lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ power-supply = <®_3p3v>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_1p8v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_can1_3v3: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "can1-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_can2_3v3: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "can2-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_usb_otg1_vbus: regulator@4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wlan: regulator@5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_wlan>;
+ compatible = "regulator-fixed";
+ clocks = <&clks IMX6SX_CLK_CKO>;
+ clock-names = "slow";
+ reg = <5>;
+ regulator-name = "wlan-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <70000>;
+ gpio = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx6sx-nitrogen6sx-sgtl5000";
+ cpu-dai = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <5>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+//&clks {
+// assigned-clocks = <&clks IMX6SX_PLL4_BYPASS_SRC>,
+// <&clks IMX6SX_PLL4_BYPASS>,
+// <&clks IMX6SX_CLK_CKO>,
+// <&clks IMX6SX_CLK_CKO1_SEL>,
+// <&clks IMX6SX_CLK_PLL4_POST_DIV>;
+// assigned-clock-parents = <&clks IMX6SX_CLK_LVDS2_IN>,
+// <&clks IMX6SX_PLL4_BYPASS_SRC>,
+// <&clks IMX6SX_CLK_CKO1>,
+// <&clks IMX6SX_CLK_CKIL>;
+// assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
+//};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "microchip,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0xC0000>;
+ read-only;
+ };
+ partition@C0000 {
+ label = "env";
+ reg = <0xC0000 0x2000>;
+ read-only;
+ };
+ partition@C2000 {
+ label = "Kernel";
+ reg = <0xC2000 0x11e000>;
+ };
+ partition@1E0000 {
+ label = "M4";
+ reg = <0x1E0000 0x20000>;
+ };
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+ phy-supply = <®_3p3v>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ ethphy2: ethernet-phy@5 {
+ reg = <5>;
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy2>;
+ phy-supply = <®_3p3v>;
+ fsl,magic-packet;
+ status = "okay";
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can1_3v3>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can2_3v3>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
+ reg = <0x0a>;
+ clocks = <&clks IMX6SX_CLK_CKO2>;
+ VDDA-supply = <®_1p8v>;
+ VDDIO-supply = <®_1p8v>;
+ VDDD-supply = <®_1p8v>;
+ assigned-clocks = <&clks IMX6SX_CLK_CKO2_SEL>,
+ <&clks IMX6SX_CLK_CKO2>;
+ assigned-clock-parents = <&clks IMX6SX_CLK_OSC>;
+ assigned-clock-rates = <0>, <24000000>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&lcdif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif1>;
+ lcd-supply = <®_3p3v>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ bits-per-pixel = <16>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&t_lcd>;
+ t_lcd: t_lcd_default {
+ clock-frequency = <74160000>;
+ hactive = <1280>;
+ vactive = <720>;
+ hback-porch = <220>;
+ hfront-porch = <110>;
+ vback-porch = <20>;
+ vfront-porch = <5>;
+ hsync-len = <40>;
+ vsync-len = <5>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-master";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ status = "okay";
+};
+
+&usbotg2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2>;
+ dr_mode = "host";
+ disable-over-current;
+ reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <4>;
+ non-removable;
+ keep-power-in-suspend;
+ vmmc-supply = <®_wlan>;
+ cap-power-off-card;
+ cap-sdio-irq;
+ vqmmc-1-8-v;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio7>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ };
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&usdhc4 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
+ pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ vqmmc-1-8-v;
+ vmmc-supply = <®_1p8v>;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6sx-nitrogen6sx {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD 0x1b0b0
+ MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC 0x1b0b0
+ MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x1b0b0
+ MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD 0x1b0b0
+ >;
+ };
+
+ pinctrl_bt_rfkill: bt-rfkillgrp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+ MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+ MX6SX_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+ MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x0b0b1
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0x1b0b0
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0x1b0b0
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0x30b1
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0x30b1
+ MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0x30b1
+ MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0x30b1
+ MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0x30b1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0x30b1
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
+ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
+ MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0xb0b0
+ MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4 0xb0b0
+ MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5 0xb0b0
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x30b1
+ MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x30b1
+ MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0x30b1
+ MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0x30b1
+ MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0x30b1
+ MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x30b1
+ MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
+ MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
+ MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0xb0b0
+ MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8 0xb0b0
+ MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0xb0b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b0b0
+ MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x0b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b0b0
+ MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24 0x0b0b0
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1 0x1b0b0
+ MX6SX_PAD_NAND_CLE__GPIO4_IO_3 0x1b0b0
+ MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x1b0b0
+ MX6SX_PAD_NAND_WE_B__GPIO4_IO_14 0x1b0b0
+ MX6SX_PAD_NAND_WP_B__GPIO4_IO_15 0x1b0b0
+ MX6SX_PAD_NAND_READY_B__GPIO4_IO_13 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x1b0b0
+ MX6SX_PAD_SD1_CMD__CCM_CLKO1 0x000b0
+ MX6SX_PAD_SD3_DATA5__GPIO7_IO_7 0x1b0b0
+ /* Test points */
+ MX6SX_PAD_NAND_DATA04__GPIO4_IO_8 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
+ MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_lcdif1: lcdif1grp {
+ fsl,pins = <
+ MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
+ MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+ MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+ >;
+ };
+
+ pinctrl_lvds: lvdsgrp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21 0xb0b0
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0xb0b0
+ MX6SX_PAD_NAND_DATA06__GPIO4_IO_10 0xb0b0
+ MX6SX_PAD_NAND_DATA07__GPIO4_IO_11 0xb0b0
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO13__PWM4_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_reg_wlan: reg-wlangrp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_DATA4__GPIO7_IO_6 0x1b0b0
+ MX6SX_PAD_GPIO1_IO11__CCM_CLKO1 0x000b0
+ >;
+ };
+
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO12__CCM_CLKO2 0x000b0
+ MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x1b0b0
+ MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x1b0b0
+ MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22 0xb0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x1b0b1
+ MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
+ MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
+ MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x1b0b1
+ MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x1b0b0
+ MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x170b1
+ >;
+ };
+
+ pinctrl_usbotg1_vbus: usbotg1-vbusgrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x1b0b0
+ >;
+ };
+
+ pinctrl_usbotg2: usbotg2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26 0xb0b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
+ MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10071
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17071
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17071
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17071
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17071
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17071
+ >;
+ };
+
+ pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10071
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17071
+ MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x17071
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17071
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17071
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17071
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17071
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17071
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17071
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17071
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17071
+ >;
+ };
+ pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9
+ >;
+ };
+ };
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
[not found] ` <1458037826-19375-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (5 preceding siblings ...)
2016-03-15 10:30 ` [PATCH 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
@ 2016-03-15 10:30 ` Gary Bisson
2016-03-15 10:30 ` [PATCH 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
` (2 subsequent siblings)
9 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 10:30 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Those two touch controllers are used by Boundary Devices platforms.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
arch/arm/configs/imx_v6_v7_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 978c5de..49dd816 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -162,7 +162,9 @@ CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
+CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_MC13783=y
+CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SX8654=y
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
[not found] ` <1458037826-19375-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (6 preceding siblings ...)
2016-03-15 10:30 ` [PATCH 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
@ 2016-03-15 10:30 ` Gary Bisson
2016-03-15 10:30 ` [PATCH 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
2016-03-15 14:04 ` [PATCH v2 0/9] imx: add latest Boundary Devices boards support Gary Bisson
9 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 10:30 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
I2C muxing is used on Nitrogen6_MAX board from Boundary Devices.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 49dd816..1faafe3 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -180,6 +180,7 @@ CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
[not found] ` <1458037826-19375-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (7 preceding siblings ...)
2016-03-15 10:30 ` [PATCH 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
@ 2016-03-15 10:30 ` Gary Bisson
2016-03-15 14:04 ` [PATCH v2 0/9] imx: add latest Boundary Devices boards support Gary Bisson
9 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 10:30 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
The rv4168 RTC is used by the following platforms:
- Nitrogen6_MAX (both Quad and Quad Plus versions)
- Nitrogen7
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 1faafe3..af22ea4 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -316,6 +316,7 @@ CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MXC=y
CONFIG_RTC_DRV_SNVS=y
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
[not found] ` <1458037826-19375-7-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
@ 2016-03-15 10:53 ` Vladimir Zapolskiy
[not found] ` <56E7E98F.5030902-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
0 siblings, 1 reply; 47+ messages in thread
From: Vladimir Zapolskiy @ 2016-03-15 10:53 UTC (permalink / raw)
To: Gary Bisson, devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR
On 15.03.2016 12:30, Gary Bisson wrote:
> Based on i.MX6 SoloX with 1GB of RAM.
>
> https://boundarydevices.com/product/nit6_solox-imx6/
>
> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 745 +++++++++++++++++++++++++++++++
> 2 files changed, 746 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 279ec61..6a2bbc4 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -363,6 +363,7 @@ dtb-$(CONFIG_SOC_IMX6SL) += \
> imx6sl-evk.dtb \
> imx6sl-warp.dtb
> dtb-$(CONFIG_SOC_IMX6SX) += \
> + imx6sx-nitrogen6sx.dtb \
> imx6sx-sabreauto.dtb \
> imx6sx-sdb-reva.dtb \
> imx6sx-sdb.dtb
> diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
> new file mode 100644
> index 0000000..8440890
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
> @@ -0,0 +1,745 @@
[snip]
> +
> +//&clks {
> +// assigned-clocks = <&clks IMX6SX_PLL4_BYPASS_SRC>,
> +// <&clks IMX6SX_PLL4_BYPASS>,
> +// <&clks IMX6SX_CLK_CKO>,
> +// <&clks IMX6SX_CLK_CKO1_SEL>,
> +// <&clks IMX6SX_CLK_PLL4_POST_DIV>;
> +// assigned-clock-parents = <&clks IMX6SX_CLK_LVDS2_IN>,
> +// <&clks IMX6SX_PLL4_BYPASS_SRC>,
> +// <&clks IMX6SX_CLK_CKO1>,
> +// <&clks IMX6SX_CLK_CKIL>;
> +// assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
> +//};
What does // do above?
--
With best wishes,
Vladimir
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
[not found] ` <56E7E98F.5030902-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
@ 2016-03-15 10:58 ` Gary Bisson
0 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 10:58 UTC (permalink / raw)
To: Vladimir Zapolskiy
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
shawnguo-DgEjT+Ai2ygdnm+yROfE0A, Sascha Hauer, Rob Herring,
fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Russell King,
mturquette-rdvid1DuHRBWk0Htik3J/w, Troy Kisky
Vladimir, All,
On Tue, Mar 15, 2016 at 11:53 AM, Vladimir Zapolskiy
<vladimir_zapolskiy-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org> wrote:
> On 15.03.2016 12:30, Gary Bisson wrote:
>> Based on i.MX6 SoloX with 1GB of RAM.
>>
>> https://boundarydevices.com/product/nit6_solox-imx6/
>>
>> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 745 +++++++++++++++++++++++++++++++
>> 2 files changed, 746 insertions(+)
>> create mode 100644 arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 279ec61..6a2bbc4 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -363,6 +363,7 @@ dtb-$(CONFIG_SOC_IMX6SL) += \
>> imx6sl-evk.dtb \
>> imx6sl-warp.dtb
>> dtb-$(CONFIG_SOC_IMX6SX) += \
>> + imx6sx-nitrogen6sx.dtb \
>> imx6sx-sabreauto.dtb \
>> imx6sx-sdb-reva.dtb \
>> imx6sx-sdb.dtb
>> diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
>> new file mode 100644
>> index 0000000..8440890
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
>> @@ -0,0 +1,745 @@
>
> [snip]
>
>> +
>> +//&clks {
>> +// assigned-clocks = <&clks IMX6SX_PLL4_BYPASS_SRC>,
>> +// <&clks IMX6SX_PLL4_BYPASS>,
>> +// <&clks IMX6SX_CLK_CKO>,
>> +// <&clks IMX6SX_CLK_CKO1_SEL>,
>> +// <&clks IMX6SX_CLK_PLL4_POST_DIV>;
>> +// assigned-clock-parents = <&clks IMX6SX_CLK_LVDS2_IN>,
>> +// <&clks IMX6SX_PLL4_BYPASS_SRC>,
>> +// <&clks IMX6SX_CLK_CKO1>,
>> +// <&clks IMX6SX_CLK_CKIL>;
>> +// assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
>> +//};
>
> What does // do above?
Oops, sorry it is some left over of my debugging.
I also realized my 6qp device tree is missing the disabled pcie. I'll
submit a v2 shortly.
Regards,
Gary
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v2 0/9] imx: add latest Boundary Devices boards support
[not found] ` <1458037826-19375-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (8 preceding siblings ...)
2016-03-15 10:30 ` [PATCH 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
@ 2016-03-15 14:04 ` Gary Bisson
[not found] ` <1458050668-26748-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
9 siblings, 1 reply; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 14:04 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Hi all,
This series adds support for the following Boundary Devices boards:
- Nitrogen7 (i.MX7)
- Nitrogen6SX (i.MX6SoloX)
- Nitrogen6QP_MAX (i.MX6QP)
The first patches add display and CAN support to i.MX7 device tree. Those
two features have been successfully tested on the Nitrogen7. Also the support
of CKIL clock has been added in order to use it as slow clock for the WiFi
module.
Then the last 3 patches add some missing configurations in order to fully
support Boundary platforms using imx_v6_v7_defconfig.
All the patches have been applied/tested on top of Shawn's 'for-next' branch.
Here are some remarks/questions that came during testing:
- Is the pxp v4l2 driver being worked on for mainline inclusion?
- Are the ldb modifications for SoloX being worked on for mainline inclusion?
- Is the WM8960 ASoC machine driver being worked on for mainline inclusion?
- When booting the Nitrogen7, there's backtrace due to clk_pllv3_prepare, does
it happen on the sdb too? Note that it doesn't prevent the board to work.
Changelog v1 -> v2:
- Remove lines commented out from nitrogen6sx dts as suggested by Vladimir
- Disable pcie for nitrogen6qp_max dts
Regards,
Gary
Gary Bisson (9):
ARM: dts: imx7d: add lcdif support
ARM: dts: imx7d: add flexcan support
clk: imx: add ckil clock for i.MX7
ARM: dts: imx: add Boundary Devices Nitrogen7 board
ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board
ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/imx6qp-nitrogen6_max.dts | 59 +++
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 732 ++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d-nitrogen7.dts | 818 +++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d.dtsi | 33 ++
arch/arm/configs/imx_v6_v7_defconfig | 4 +
drivers/clk/imx/clk-imx7d.c | 3 +-
include/dt-bindings/clock/imx7d-clock.h | 3 +-
8 files changed, 1653 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
create mode 100644 arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
create mode 100644 arch/arm/boot/dts/imx7d-nitrogen7.dts
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v2 1/9] ARM: dts: imx7d: add lcdif support
[not found] ` <1458050668-26748-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
@ 2016-03-15 14:04 ` Gary Bisson
[not found] ` <1458050668-26748-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-03-15 14:04 ` [PATCH v2 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
` (8 subsequent siblings)
9 siblings, 1 reply; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 14:04 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Add the device node for the i.MX7 eLCDIF interface.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changelog v1 -> v2:
- none
---
arch/arm/boot/dts/imx7d.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index b5a50e0..a768716 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -608,6 +608,17 @@
status = "disabled";
};
+ lcdif: lcdif@30730000 {
+ compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+ reg = <0x30730000 0x10000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>;
+ clock-names = "pix", "axi", "disp_axi";
+ status = "disabled";
+ };
+
pwm1: pwm@30660000 {
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
reg = <0x30660000 0x10000>;
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v2 2/9] ARM: dts: imx7d: add flexcan support
[not found] ` <1458050668-26748-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-03-15 14:04 ` [PATCH v2 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
@ 2016-03-15 14:04 ` Gary Bisson
[not found] ` <1458050668-26748-3-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-03-15 14:04 ` [PATCH v2 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
` (7 subsequent siblings)
9 siblings, 1 reply; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 14:04 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Add the device nodes for the i.MX7 FlexCAN buses.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changelog v1 -> v2:
- none
---
arch/arm/boot/dts/imx7d.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index a768716..c5e47a4 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -930,6 +930,28 @@
fsl,num-rx-queues=<3>;
status = "disabled";
};
+
+ flexcan1: can@30a00000 {
+ compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x30a00000 0x10000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CAN1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ stop-mode = <&gpr 0x10 1 0x10 17>;
+ status = "disabled";
+ };
+
+ flexcan2: can@30a10000 {
+ compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x30a10000 0x10000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CAN2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ stop-mode = <&gpr 0x10 2 0x10 18>;
+ status = "disabled";
+ };
};
};
};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v2 3/9] clk: imx: add ckil clock for i.MX7
[not found] ` <1458050668-26748-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-03-15 14:04 ` [PATCH v2 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
2016-03-15 14:04 ` [PATCH v2 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
@ 2016-03-15 14:04 ` Gary Bisson
2016-03-15 14:04 ` [PATCH v2 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
` (6 subsequent siblings)
9 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 14:04 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Add the necessary clock to use the ckil on i.MX7.
Inspired from the following patch:
https://github.com/boundarydevices/linux-imx6/commit/b80e8271
Signed-off-by: Troy Kisky <troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changelog v1 -> v2:
- none
---
drivers/clk/imx/clk-imx7d.c | 3 ++-
include/dt-bindings/clock/imx7d-clock.h | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index fbb6a8c..7912be8 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -342,7 +342,7 @@ static const char *clko1_sel[] = { "osc", "pll_sys_main_clk",
static const char *clko2_sel[] = { "osc", "pll_sys_main_240m_clk",
"pll_sys_pfd0_392m_clk", "pll_sys_pfd1_166m_clk", "pll_sys_pfd4_clk",
- "pll_audio_main_clk", "pll_video_main_clk", "osc_32k_clk", };
+ "pll_audio_main_clk", "pll_video_main_clk", "ckil", };
static const char *lvds1_sel[] = { "pll_arm_main_clk",
"pll_sys_main_clk", "pll_sys_pfd0_392m_clk", "pll_sys_pfd1_332m_clk",
@@ -382,6 +382,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
clks[IMX7D_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
clks[IMX7D_OSC_24M_CLK] = of_clk_get_by_name(ccm_node, "osc");
+ clks[IMX7D_CKIL] = of_clk_get_by_name(ccm_node, "ckil");
np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-anatop");
base = of_iomap(np, 0);
diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h
index edca8985c..1183347 100644
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
@@ -448,5 +448,6 @@
#define IMX7D_PLL_DRAM_TEST_DIV 435
#define IMX7D_ADC_ROOT_CLK 436
#define IMX7D_CLK_ARM 437
-#define IMX7D_CLK_END 438
+#define IMX7D_CKIL 438
+#define IMX7D_CLK_END 439
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v2 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board
[not found] ` <1458050668-26748-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (2 preceding siblings ...)
2016-03-15 14:04 ` [PATCH v2 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
@ 2016-03-15 14:04 ` Gary Bisson
2016-03-15 14:04 ` [PATCH v2 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
` (5 subsequent siblings)
9 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 14:04 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Based on i.MX7 Dual with 1GB of RAM.
https://boundarydevices.com/product/nitrogen7/
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changelog v1 -> v2:
- none
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx7d-nitrogen7.dts | 818 ++++++++++++++++++++++++++++++++++
2 files changed, 819 insertions(+)
create mode 100644 arch/arm/boot/dts/imx7d-nitrogen7.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 2bfce0f..fd67d8d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -369,6 +369,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
+ imx7d-nitrogen7.dtb \
imx7d-sbc-imx7.dtb \
imx7d-sdb.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
new file mode 100644
index 0000000..a5124d8
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -0,0 +1,818 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7d.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX7 Nitrogen7 Board";
+ compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
+
+ aliases {
+ fb_lcd = &lcdif;
+ t_lcd = &t_lcd;
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ backlight_j9 {
+ compatible = "gpio-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight_j9>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ default-on;
+ };
+
+ backlight_j20 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_otg1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can2_3v3: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "can2-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_vref_1v8: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vref-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_vref_3v3: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_wlan: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+ clock-names = "slow";
+ regulator-name = "reg_wlan";
+ startup-delay-us = <70000>;
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+};
+
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&adc2 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+ <&clks IMX7D_CLKO2_ROOT_DIV>;
+ assigned-clock-parents = <&clks IMX7D_CKIL>;
+ assigned-clock-rates = <0>, <32768>;
+};
+
+&cpu0 {
+ arm-supply = <&sw1a_reg>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+ };
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can2_3v3>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze3000@08 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* use sw1c_reg to align with pfuze100/pfuze200 */
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ rtc@68 {
+ compatible = "rv4162";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_rv4162>;
+ reg = <0x68>;
+ interrupts-extended = <&gpio2 15 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ touch@48 {
+ compatible = "ti,tsc2004";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_tsc2004>;
+ interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ codec: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clock-names = "mclk";
+ wlf,shared-lrclk;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ lcd-supply = <®_vref_3v3>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: lcd-display {
+ bits-per-pixel = <16>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&t_lcd>;
+ t_lcd: t_lcd_default {
+ /* default to Okaya display */
+ clock-frequency = <30000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <48>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <3>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ control-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ uart-has-rs485-half-duplex;
+ rs485-mode = <1>;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vgen3_reg>;
+ bus-width = <4>;
+ fsl,tuning-step = <2>;
+ wakeup-source;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_wlan>;
+ vqmmc-1-8-v;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <8>;
+ fsl,tuning-step = <2>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog1>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>;
+
+ imx7d-nitrogen7 {
+ pinctrl_hog_1: hoggrp-1 {
+ fsl,pins = <
+ MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x5d
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x7d
+ MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x7d
+ >;
+ };
+
+ pinctrl_bt_rfkill: btrfkillgrp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x7d
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
+ MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3
+ MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x3
+ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71
+ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71
+ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x71
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11
+ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11
+ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x71
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11
+ MX7D_PAD_SD3_STROBE__GPIO6_IO10 0x75 /* Reset */
+ >;
+ };
+
+ pinctrl_flash: flashgrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x71
+ MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x71
+ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x7d
+ MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x7d
+ MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x71
+ MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x71
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x7d
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x7d
+ MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x7d
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2_rv4162: i2c2-rv4162grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x7d
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c3_tsc2004: i2c3tsc2004grp {
+ fsl,pins = <
+ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x79
+ MX7D_PAD_SD2_WP__GPIO5_IO10 0x7d
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
+ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_j2: j2grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x7d
+ MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x7d
+ MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x7d
+ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x7d
+ MX7D_PAD_SD1_WP__GPIO5_IO1 0x7d
+ MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x7d
+ MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x7d
+ MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x7d
+ MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x7d
+ MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x7d
+ MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x7d
+ MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x7d
+ MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x7d
+ MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x7d
+ MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x7d
+ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x7d
+ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x7d
+ MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x7d
+ MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x7d
+ MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x7d
+ MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x7d
+ MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x7d
+ MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22 0x7d
+ MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x7d
+ MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20 0x7d
+ MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x7d
+ MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19 0x7d
+ MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x7d
+ MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x7d
+ MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x7d
+ MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x7d
+ MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x7d
+ MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x7d
+ MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x7d
+ MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x7d
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x79
+ MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x79
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7d
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
+ MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x79
+ MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x79
+ MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x79
+ MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x7d
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79
+ MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79
+ MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79
+ MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79
+ >;
+ };
+
+ pinctrl_usbotg2: usbotg2grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x7d
+ MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x75
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x75
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1b
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x59
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x19
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
+ MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x59
+ MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x19
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f
+ MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
+ MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f
+ MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
+ MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
+ >;
+ };
+ };
+};
+
+&iomuxc_lpsr {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_2>;
+
+ imx7d-nitrogen7 {
+ pinctrl_hog_2: hoggrp-2 {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x7d
+ MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x7d
+ >;
+ };
+
+ pinctrl_backlight_j9: backlightj9grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x7d
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x7d
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x7d
+ MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14
+ >;
+ };
+
+ pinctrl_wdog1: wdog1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x75
+ >;
+ };
+ };
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v2 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board
[not found] ` <1458050668-26748-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (3 preceding siblings ...)
2016-03-15 14:04 ` [PATCH v2 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
@ 2016-03-15 14:04 ` Gary Bisson
2016-03-15 14:04 ` [PATCH v2 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
` (4 subsequent siblings)
9 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 14:04 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Based on i.MX6 Quad Plus with 4GB of RAM.
https://boundarydevices.com/product/nitrogen6max/
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changelog v1 -> v2:
- Disable pcie for nitrogen6qp_max dts
-> required for the board to boot normally
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6qp-nitrogen6_max.dts | 59 ++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index fd67d8d..279ec61 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -356,6 +356,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-udoo.dtb \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb \
+ imx6qp-nitrogen6_max.dtb \
imx6qp-sabreauto.dtb \
imx6qp-sabresd.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
new file mode 100644
index 0000000..a39b860
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-nitrogen6_max.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX Board";
+ compatible = "boundary,imx6qp-nitrogen6_max", "fsl,imx6qp";
+};
+
+&pcie {
+ status = "disabled";
+};
+
+&sata {
+ status = "okay";
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v2 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
[not found] ` <1458050668-26748-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (4 preceding siblings ...)
2016-03-15 14:04 ` [PATCH v2 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
@ 2016-03-15 14:04 ` Gary Bisson
2016-03-15 14:04 ` [PATCH v2 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
` (3 subsequent siblings)
9 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 14:04 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Based on i.MX6 SoloX with 1GB of RAM.
https://boundarydevices.com/product/nit6_solox-imx6/
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changelog v1 -> v2:
- Remove lines commented out from nitrogen6sx dts as suggested by Vladimir
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 732 +++++++++++++++++++++++++++++++
2 files changed, 733 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 279ec61..6a2bbc4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -363,6 +363,7 @@ dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SX) += \
+ imx6sx-nitrogen6sx.dtb \
imx6sx-sabreauto.dtb \
imx6sx-sdb-reva.dtb \
imx6sx-sdb.dtb
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
new file mode 100644
index 0000000..9f3056c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -0,0 +1,732 @@
+/*
+ * Copyright (C) 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board";
+ compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx";
+
+ aliases {
+ fb_lcd = &lcdif1;
+ t_lcd = &t_lcd;
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ backlight_lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ power-supply = <®_3p3v>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_1p8v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_can1_3v3: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "can1-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_can2_3v3: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "can2-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_usb_otg1_vbus: regulator@4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wlan: regulator@5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_wlan>;
+ compatible = "regulator-fixed";
+ clocks = <&clks IMX6SX_CLK_CKO>;
+ clock-names = "slow";
+ reg = <5>;
+ regulator-name = "wlan-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <70000>;
+ gpio = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx6sx-nitrogen6sx-sgtl5000";
+ cpu-dai = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <5>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "microchip,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0xC0000>;
+ read-only;
+ };
+ partition@C0000 {
+ label = "env";
+ reg = <0xC0000 0x2000>;
+ read-only;
+ };
+ partition@C2000 {
+ label = "Kernel";
+ reg = <0xC2000 0x11e000>;
+ };
+ partition@1E0000 {
+ label = "M4";
+ reg = <0x1E0000 0x20000>;
+ };
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+ phy-supply = <®_3p3v>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ ethphy2: ethernet-phy@5 {
+ reg = <5>;
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy2>;
+ phy-supply = <®_3p3v>;
+ fsl,magic-packet;
+ status = "okay";
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can1_3v3>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can2_3v3>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
+ reg = <0x0a>;
+ clocks = <&clks IMX6SX_CLK_CKO2>;
+ VDDA-supply = <®_1p8v>;
+ VDDIO-supply = <®_1p8v>;
+ VDDD-supply = <®_1p8v>;
+ assigned-clocks = <&clks IMX6SX_CLK_CKO2_SEL>,
+ <&clks IMX6SX_CLK_CKO2>;
+ assigned-clock-parents = <&clks IMX6SX_CLK_OSC>;
+ assigned-clock-rates = <0>, <24000000>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&lcdif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif1>;
+ lcd-supply = <®_3p3v>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ bits-per-pixel = <16>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&t_lcd>;
+ t_lcd: t_lcd_default {
+ clock-frequency = <74160000>;
+ hactive = <1280>;
+ vactive = <720>;
+ hback-porch = <220>;
+ hfront-porch = <110>;
+ vback-porch = <20>;
+ vfront-porch = <5>;
+ hsync-len = <40>;
+ vsync-len = <5>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-master";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ status = "okay";
+};
+
+&usbotg2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2>;
+ dr_mode = "host";
+ disable-over-current;
+ reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <4>;
+ non-removable;
+ keep-power-in-suspend;
+ vmmc-supply = <®_wlan>;
+ cap-power-off-card;
+ cap-sdio-irq;
+ vqmmc-1-8-v;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio7>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ };
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&usdhc4 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
+ pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ vqmmc-1-8-v;
+ vmmc-supply = <®_1p8v>;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6sx-nitrogen6sx {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD 0x1b0b0
+ MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC 0x1b0b0
+ MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x1b0b0
+ MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD 0x1b0b0
+ >;
+ };
+
+ pinctrl_bt_rfkill: bt-rfkillgrp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+ MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+ MX6SX_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+ MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x0b0b1
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0x1b0b0
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0x1b0b0
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0x30b1
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0x30b1
+ MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0x30b1
+ MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0x30b1
+ MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0x30b1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0x30b1
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
+ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
+ MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0xb0b0
+ MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4 0xb0b0
+ MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5 0xb0b0
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x30b1
+ MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x30b1
+ MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0x30b1
+ MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0x30b1
+ MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0x30b1
+ MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x30b1
+ MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
+ MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
+ MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0xb0b0
+ MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8 0xb0b0
+ MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0xb0b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b0b0
+ MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x0b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b0b0
+ MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24 0x0b0b0
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1 0x1b0b0
+ MX6SX_PAD_NAND_CLE__GPIO4_IO_3 0x1b0b0
+ MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x1b0b0
+ MX6SX_PAD_NAND_WE_B__GPIO4_IO_14 0x1b0b0
+ MX6SX_PAD_NAND_WP_B__GPIO4_IO_15 0x1b0b0
+ MX6SX_PAD_NAND_READY_B__GPIO4_IO_13 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x1b0b0
+ MX6SX_PAD_SD1_CMD__CCM_CLKO1 0x000b0
+ MX6SX_PAD_SD3_DATA5__GPIO7_IO_7 0x1b0b0
+ /* Test points */
+ MX6SX_PAD_NAND_DATA04__GPIO4_IO_8 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
+ MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_lcdif1: lcdif1grp {
+ fsl,pins = <
+ MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
+ MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+ MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+ >;
+ };
+
+ pinctrl_lvds: lvdsgrp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21 0xb0b0
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0xb0b0
+ MX6SX_PAD_NAND_DATA06__GPIO4_IO_10 0xb0b0
+ MX6SX_PAD_NAND_DATA07__GPIO4_IO_11 0xb0b0
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO13__PWM4_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_reg_wlan: reg-wlangrp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_DATA4__GPIO7_IO_6 0x1b0b0
+ MX6SX_PAD_GPIO1_IO11__CCM_CLKO1 0x000b0
+ >;
+ };
+
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO12__CCM_CLKO2 0x000b0
+ MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x1b0b0
+ MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x1b0b0
+ MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22 0xb0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x1b0b1
+ MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
+ MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
+ MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x1b0b1
+ MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x1b0b0
+ MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x170b1
+ >;
+ };
+
+ pinctrl_usbotg1_vbus: usbotg1-vbusgrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x1b0b0
+ >;
+ };
+
+ pinctrl_usbotg2: usbotg2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26 0xb0b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
+ MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10071
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17071
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17071
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17071
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17071
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17071
+ >;
+ };
+
+ pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10071
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17071
+ MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x17071
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17071
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17071
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17071
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17071
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17071
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17071
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17071
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17071
+ >;
+ };
+ pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9
+ >;
+ };
+ };
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v2 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
[not found] ` <1458050668-26748-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (5 preceding siblings ...)
2016-03-15 14:04 ` [PATCH v2 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
@ 2016-03-15 14:04 ` Gary Bisson
2016-03-15 14:04 ` [PATCH v2 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
` (2 subsequent siblings)
9 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 14:04 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Those two touch controllers are used by Boundary Devices platforms.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changelog v1 -> v2:
- none
---
arch/arm/configs/imx_v6_v7_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 978c5de..49dd816 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -162,7 +162,9 @@ CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
+CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_MC13783=y
+CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SX8654=y
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v2 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
[not found] ` <1458050668-26748-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (6 preceding siblings ...)
2016-03-15 14:04 ` [PATCH v2 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
@ 2016-03-15 14:04 ` Gary Bisson
2016-03-15 14:04 ` [PATCH v2 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
2016-04-02 16:25 ` [PATCH v3 0/9] imx: add latest Boundary Devices boards support Gary Bisson
9 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 14:04 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
I2C muxing is used on Nitrogen6_MAX board from Boundary Devices.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changelog v1 -> v2:
- none
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 49dd816..1faafe3 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -180,6 +180,7 @@ CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v2 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
[not found] ` <1458050668-26748-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (7 preceding siblings ...)
2016-03-15 14:04 ` [PATCH v2 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
@ 2016-03-15 14:04 ` Gary Bisson
2016-04-02 16:25 ` [PATCH v3 0/9] imx: add latest Boundary Devices boards support Gary Bisson
9 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-03-15 14:04 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
The rv4168 RTC is used by the following platforms:
- Nitrogen6_MAX (both Quad and Quad Plus versions)
- Nitrogen7
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changelog v1 -> v2:
- none
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 1faafe3..af22ea4 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -316,6 +316,7 @@ CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MXC=y
CONFIG_RTC_DRV_SNVS=y
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH v2 1/9] ARM: dts: imx7d: add lcdif support
[not found] ` <1458050668-26748-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
@ 2016-04-02 1:29 ` Shawn Guo
2016-04-02 16:08 ` Gary Bisson
0 siblings, 1 reply; 47+ messages in thread
From: Shawn Guo @ 2016-04-02 1:29 UTC (permalink / raw)
To: Gary Bisson
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR
On Tue, Mar 15, 2016 at 03:04:20PM +0100, Gary Bisson wrote:
> Add the device node for the i.MX7 eLCDIF interface.
>
> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
> ---
>
> Changelog v1 -> v2:
> - none
>
> ---
> arch/arm/boot/dts/imx7d.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
> index b5a50e0..a768716 100644
> --- a/arch/arm/boot/dts/imx7d.dtsi
> +++ b/arch/arm/boot/dts/imx7d.dtsi
> @@ -608,6 +608,17 @@
> status = "disabled";
> };
>
> + lcdif: lcdif@30730000 {
Please add the node in order of unit-address.
Shawn
> + compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
> + reg = <0x30730000 0x10000>;
> + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
> + <&clks IMX7D_CLK_DUMMY>,
> + <&clks IMX7D_CLK_DUMMY>;
> + clock-names = "pix", "axi", "disp_axi";
> + status = "disabled";
> + };
> +
> pwm1: pwm@30660000 {
> compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
> reg = <0x30660000 0x10000>;
> --
> 2.7.0
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH v2 2/9] ARM: dts: imx7d: add flexcan support
[not found] ` <1458050668-26748-3-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
@ 2016-04-02 1:31 ` Shawn Guo
2016-04-02 16:10 ` Gary Bisson
0 siblings, 1 reply; 47+ messages in thread
From: Shawn Guo @ 2016-04-02 1:31 UTC (permalink / raw)
To: Gary Bisson
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR
On Tue, Mar 15, 2016 at 03:04:21PM +0100, Gary Bisson wrote:
> Add the device nodes for the i.MX7 FlexCAN buses.
>
> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
> ---
>
> Changelog v1 -> v2:
> - none
>
> ---
> arch/arm/boot/dts/imx7d.dtsi | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
> index a768716..c5e47a4 100644
> --- a/arch/arm/boot/dts/imx7d.dtsi
> +++ b/arch/arm/boot/dts/imx7d.dtsi
> @@ -930,6 +930,28 @@
> fsl,num-rx-queues=<3>;
> status = "disabled";
> };
> +
> + flexcan1: can@30a00000 {
> + compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
> + reg = <0x30a00000 0x10000>;
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX7D_CLK_DUMMY>,
> + <&clks IMX7D_CAN1_ROOT_CLK>;
> + clock-names = "ipg", "per";
> + stop-mode = <&gpr 0x10 1 0x10 17>;
Is this property documented anywhere, or even supported by mainline
kernel?
Shawn
> + status = "disabled";
> + };
> +
> + flexcan2: can@30a10000 {
> + compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
> + reg = <0x30a10000 0x10000>;
> + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX7D_CLK_DUMMY>,
> + <&clks IMX7D_CAN2_ROOT_CLK>;
> + clock-names = "ipg", "per";
> + stop-mode = <&gpr 0x10 2 0x10 18>;
> + status = "disabled";
> + };
> };
> };
> };
> --
> 2.7.0
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH v2 1/9] ARM: dts: imx7d: add lcdif support
2016-04-02 1:29 ` Shawn Guo
@ 2016-04-02 16:08 ` Gary Bisson
0 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-04-02 16:08 UTC (permalink / raw)
To: Shawn Guo
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Sascha Hauer, Rob Herring,
fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Russell King,
Michael Turquette, Troy Kisky
Shawn, All,
On Sat, Apr 2, 2016 at 3:29 AM, Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> On Tue, Mar 15, 2016 at 03:04:20PM +0100, Gary Bisson wrote:
>> Add the device node for the i.MX7 eLCDIF interface.
>>
>> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
>> ---
>>
>> Changelog v1 -> v2:
>> - none
>>
>> ---
>> arch/arm/boot/dts/imx7d.dtsi | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
>> index b5a50e0..a768716 100644
>> --- a/arch/arm/boot/dts/imx7d.dtsi
>> +++ b/arch/arm/boot/dts/imx7d.dtsi
>> @@ -608,6 +608,17 @@
>> status = "disabled";
>> };
>>
>> + lcdif: lcdif@30730000 {
>
> Please add the node in order of unit-address.
Sorry I did it alphabetically for some reason, I'll submit a v3 today.
Regards,
Gary
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH v2 2/9] ARM: dts: imx7d: add flexcan support
2016-04-02 1:31 ` Shawn Guo
@ 2016-04-02 16:10 ` Gary Bisson
0 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-04-02 16:10 UTC (permalink / raw)
To: Shawn Guo
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Sascha Hauer, Rob Herring,
fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Russell King,
Michael Turquette, Troy Kisky
Shawn, All,
On Sat, Apr 2, 2016 at 3:31 AM, Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> On Tue, Mar 15, 2016 at 03:04:21PM +0100, Gary Bisson wrote:
>> Add the device nodes for the i.MX7 FlexCAN buses.
>>
>> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
>> ---
>>
>> Changelog v1 -> v2:
>> - none
>>
>> ---
>> arch/arm/boot/dts/imx7d.dtsi | 22 ++++++++++++++++++++++
>> 1 file changed, 22 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
>> index a768716..c5e47a4 100644
>> --- a/arch/arm/boot/dts/imx7d.dtsi
>> +++ b/arch/arm/boot/dts/imx7d.dtsi
>> @@ -930,6 +930,28 @@
>> fsl,num-rx-queues=<3>;
>> status = "disabled";
>> };
>> +
>> + flexcan1: can@30a00000 {
>> + compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
>> + reg = <0x30a00000 0x10000>;
>> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&clks IMX7D_CLK_DUMMY>,
>> + <&clks IMX7D_CAN1_ROOT_CLK>;
>> + clock-names = "ipg", "per";
>> + stop-mode = <&gpr 0x10 1 0x10 17>;
>
> Is this property documented anywhere, or even supported by mainline
> kernel?
No you're right this property is only available on NXP kernel:
http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt?id=rel_imx_4.1.15_1.0.0_ga#n20
I'll remove it for now, I'll re-order the nodes as well.
Regards,
Gary
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v3 0/9] imx: add latest Boundary Devices boards support
[not found] ` <1458050668-26748-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (8 preceding siblings ...)
2016-03-15 14:04 ` [PATCH v2 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
@ 2016-04-02 16:25 ` Gary Bisson
[not found] ` <1459614351-16731-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
9 siblings, 1 reply; 47+ messages in thread
From: Gary Bisson @ 2016-04-02 16:25 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Hi all,
This series adds support for the following Boundary Devices boards:
- Nitrogen7 (i.MX7)
- Nitrogen6SX (i.MX6SoloX)
- Nitrogen6QP_MAX (i.MX6QP)
The first patches add display and CAN support to i.MX7 device tree. Those
two features have been successfully tested on the Nitrogen7. Also the support
of CKIL clock has been added in order to use it as slow clock for the WiFi
module.
Then the last 3 patches add some missing configurations in order to fully
support Boundary platforms using imx_v6_v7_defconfig.
All the patches have been applied/tested on top of Shawn's 'for-next' branch.
Here are some remarks/questions that came during testing:
- Is the pxp v4l2 driver being worked on for mainline inclusion?
- Are the ldb modifications for SoloX being worked on for mainline inclusion?
- Is the WM8960 ASoC machine driver being worked on for mainline inclusion?
- When booting the Nitrogen7, there's backtrace due to clk_pllv3_prepare, does
it happen on the sdb too? Note that it doesn't prevent the board to work.
Changes v1 -> v2:
- Remove lines commented out from nitrogen6sx dts as suggested by Vladimir
- Disable pcie for nitrogen6qp_max dts
Changes v2 -> v3:
- Re-order lcdif node by unit-address order
- Re-order flexcan nodes by unit-address order
- Remove flexcan unnecessary stop-mode property
- Fix Nitrogen7 BT UART clock parent
- Fix Nitrogen7 lvdo2 node to be always-on
Regards,
Gary
Gary Bisson (9):
ARM: dts: imx7d: add lcdif support
ARM: dts: imx7d: add flexcan support
clk: imx: add ckil clock for i.MX7
ARM: dts: imx: add Boundary Devices Nitrogen7 board
ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board
ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/imx6qp-nitrogen6_max.dts | 59 +++
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 732 ++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d-nitrogen7.dts | 819 +++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d.dtsi | 31 ++
arch/arm/configs/imx_v6_v7_defconfig | 4 +
drivers/clk/imx/clk-imx7d.c | 3 +-
include/dt-bindings/clock/imx7d-clock.h | 3 +-
8 files changed, 1652 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
create mode 100644 arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
create mode 100644 arch/arm/boot/dts/imx7d-nitrogen7.dts
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v3 1/9] ARM: dts: imx7d: add lcdif support
[not found] ` <1459614351-16731-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
@ 2016-04-02 16:25 ` Gary Bisson
[not found] ` <1459614351-16731-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-02 16:25 ` [PATCH v3 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
` (7 subsequent siblings)
8 siblings, 1 reply; 47+ messages in thread
From: Gary Bisson @ 2016-04-02 16:25 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Add the device node for the i.MX7 eLCDIF interface.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changes v1 -> v2:
- none
Changes v2 -> v3:
- Re-order lcdif node by unit-address order
---
arch/arm/boot/dts/imx7d.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index b5a50e0..2547e16 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -651,6 +651,17 @@
#pwm-cells = <2>;
status = "disabled";
};
+
+ lcdif: lcdif@30730000 {
+ compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+ reg = <0x30730000 0x10000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>;
+ clock-names = "pix", "axi", "disp_axi";
+ status = "disabled";
+ };
};
aips3: aips-bus@30800000 {
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v3 2/9] ARM: dts: imx7d: add flexcan support
[not found] ` <1459614351-16731-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-02 16:25 ` [PATCH v3 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
@ 2016-04-02 16:25 ` Gary Bisson
2016-04-02 16:25 ` [PATCH v3 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
` (6 subsequent siblings)
8 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-04-02 16:25 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Add the device nodes for the i.MX7 FlexCAN buses.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changes v1 -> v2:
- none
Changes v2 -> v3:
- Re-order flexcan nodes by unit-address order
- Remove flexcan unnecessary stop-mode property
---
arch/arm/boot/dts/imx7d.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 2547e16..6b3faa2 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -704,6 +704,26 @@
status = "disabled";
};
+ flexcan1: can@30a00000 {
+ compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x30a00000 0x10000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CAN1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ flexcan2: can@30a10000 {
+ compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x30a10000 0x10000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CAN2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
i2c1: i2c@30a20000 {
#address-cells = <1>;
#size-cells = <0>;
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v3 3/9] clk: imx: add ckil clock for i.MX7
[not found] ` <1459614351-16731-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-02 16:25 ` [PATCH v3 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
2016-04-02 16:25 ` [PATCH v3 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
@ 2016-04-02 16:25 ` Gary Bisson
2016-04-02 16:25 ` [PATCH v3 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
` (5 subsequent siblings)
8 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-04-02 16:25 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Add the necessary clock to use the ckil on i.MX7.
Inspired from the following patch:
https://github.com/boundarydevices/linux-imx6/commit/b80e8271
Signed-off-by: Troy Kisky <troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changes v1 -> v2:
- none
Changes v2 -> v3:
- none
---
drivers/clk/imx/clk-imx7d.c | 3 ++-
include/dt-bindings/clock/imx7d-clock.h | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index fbb6a8c..7912be8 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -342,7 +342,7 @@ static const char *clko1_sel[] = { "osc", "pll_sys_main_clk",
static const char *clko2_sel[] = { "osc", "pll_sys_main_240m_clk",
"pll_sys_pfd0_392m_clk", "pll_sys_pfd1_166m_clk", "pll_sys_pfd4_clk",
- "pll_audio_main_clk", "pll_video_main_clk", "osc_32k_clk", };
+ "pll_audio_main_clk", "pll_video_main_clk", "ckil", };
static const char *lvds1_sel[] = { "pll_arm_main_clk",
"pll_sys_main_clk", "pll_sys_pfd0_392m_clk", "pll_sys_pfd1_332m_clk",
@@ -382,6 +382,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
clks[IMX7D_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
clks[IMX7D_OSC_24M_CLK] = of_clk_get_by_name(ccm_node, "osc");
+ clks[IMX7D_CKIL] = of_clk_get_by_name(ccm_node, "ckil");
np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-anatop");
base = of_iomap(np, 0);
diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h
index edca8985c..1183347 100644
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
@@ -448,5 +448,6 @@
#define IMX7D_PLL_DRAM_TEST_DIV 435
#define IMX7D_ADC_ROOT_CLK 436
#define IMX7D_CLK_ARM 437
-#define IMX7D_CLK_END 438
+#define IMX7D_CKIL 438
+#define IMX7D_CLK_END 439
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v3 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board
[not found] ` <1459614351-16731-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (2 preceding siblings ...)
2016-04-02 16:25 ` [PATCH v3 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
@ 2016-04-02 16:25 ` Gary Bisson
[not found] ` <1459614351-16731-5-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-02 16:25 ` [PATCH v3 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
` (4 subsequent siblings)
8 siblings, 1 reply; 47+ messages in thread
From: Gary Bisson @ 2016-04-02 16:25 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Based on i.MX7 Dual with 1GB of RAM.
https://boundarydevices.com/product/nitrogen7/
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changes v1 -> v2:
- none
Changes v2 -> v3:
- Fix Nitrogen7 BT UART clock parent
- Fix Nitrogen7 lvdo2 node to be always-on
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx7d-nitrogen7.dts | 819 ++++++++++++++++++++++++++++++++++
2 files changed, 820 insertions(+)
create mode 100644 arch/arm/boot/dts/imx7d-nitrogen7.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 81e7f92..96dc889 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -380,6 +380,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-tx6ul-mainboard.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
+ imx7d-nitrogen7.dtb \
imx7d-sbc-imx7.dtb \
imx7d-sdb.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
new file mode 100644
index 0000000..1321e80
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -0,0 +1,819 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7d.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX7 Nitrogen7 Board";
+ compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
+
+ aliases {
+ fb_lcd = &lcdif;
+ t_lcd = &t_lcd;
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ backlight_j9 {
+ compatible = "gpio-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight_j9>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ default-on;
+ };
+
+ backlight_j20 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_otg1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can2_3v3: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "can2-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_vref_1v8: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vref-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_vref_3v3: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_wlan: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+ clock-names = "slow";
+ regulator-name = "reg_wlan";
+ startup-delay-us = <70000>;
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+};
+
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&adc2 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+ <&clks IMX7D_CLKO2_ROOT_DIV>;
+ assigned-clock-parents = <&clks IMX7D_CKIL>;
+ assigned-clock-rates = <0>, <32768>;
+};
+
+&cpu0 {
+ arm-supply = <&sw1a_reg>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+ };
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can2_3v3>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze3000@08 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* use sw1c_reg to align with pfuze100/pfuze200 */
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ rtc@68 {
+ compatible = "rv4162";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_rv4162>;
+ reg = <0x68>;
+ interrupts-extended = <&gpio2 15 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ touch@48 {
+ compatible = "ti,tsc2004";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_tsc2004>;
+ interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ codec: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clock-names = "mclk";
+ wlf,shared-lrclk;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ lcd-supply = <®_vref_3v3>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: lcd-display {
+ bits-per-pixel = <16>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&t_lcd>;
+ t_lcd: t_lcd_default {
+ /* default to Okaya display */
+ clock-frequency = <30000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <48>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <3>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ control-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ uart-has-rs485-half-duplex;
+ rs485-mode = <1>;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vgen3_reg>;
+ bus-width = <4>;
+ fsl,tuning-step = <2>;
+ wakeup-source;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_wlan>;
+ vqmmc-1-8-v;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <8>;
+ fsl,tuning-step = <2>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog1>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>;
+
+ imx7d-nitrogen7 {
+ pinctrl_hog_1: hoggrp-1 {
+ fsl,pins = <
+ MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x5d
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x7d
+ MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x7d
+ >;
+ };
+
+ pinctrl_bt_rfkill: btrfkillgrp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x7d
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
+ MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3
+ MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x3
+ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71
+ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71
+ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x71
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11
+ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11
+ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x71
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11
+ MX7D_PAD_SD3_STROBE__GPIO6_IO10 0x75 /* Reset */
+ >;
+ };
+
+ pinctrl_flash: flashgrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x71
+ MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x71
+ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x7d
+ MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x7d
+ MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x71
+ MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x71
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x7d
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x7d
+ MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x7d
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2_rv4162: i2c2-rv4162grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x7d
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c3_tsc2004: i2c3tsc2004grp {
+ fsl,pins = <
+ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x79
+ MX7D_PAD_SD2_WP__GPIO5_IO10 0x7d
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
+ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_j2: j2grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x7d
+ MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x7d
+ MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x7d
+ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x7d
+ MX7D_PAD_SD1_WP__GPIO5_IO1 0x7d
+ MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x7d
+ MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x7d
+ MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x7d
+ MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x7d
+ MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x7d
+ MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x7d
+ MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x7d
+ MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x7d
+ MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x7d
+ MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x7d
+ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x7d
+ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x7d
+ MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x7d
+ MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x7d
+ MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x7d
+ MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x7d
+ MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x7d
+ MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22 0x7d
+ MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x7d
+ MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20 0x7d
+ MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x7d
+ MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19 0x7d
+ MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x7d
+ MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x7d
+ MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x7d
+ MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x7d
+ MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x7d
+ MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x7d
+ MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x7d
+ MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x7d
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x79
+ MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x79
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7d
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
+ MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x79
+ MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x79
+ MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x79
+ MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x7d
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79
+ MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79
+ MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79
+ MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79
+ >;
+ };
+
+ pinctrl_usbotg2: usbotg2grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x7d
+ MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x75
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x75
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1b
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x59
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x19
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
+ MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x59
+ MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x19
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f
+ MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
+ MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f
+ MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
+ MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
+ >;
+ };
+ };
+};
+
+&iomuxc_lpsr {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_2>;
+
+ imx7d-nitrogen7 {
+ pinctrl_hog_2: hoggrp-2 {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x7d
+ MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x7d
+ >;
+ };
+
+ pinctrl_backlight_j9: backlightj9grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x7d
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x7d
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x7d
+ MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14
+ >;
+ };
+
+ pinctrl_wdog1: wdog1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x75
+ >;
+ };
+ };
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v3 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board
[not found] ` <1459614351-16731-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (3 preceding siblings ...)
2016-04-02 16:25 ` [PATCH v3 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
@ 2016-04-02 16:25 ` Gary Bisson
[not found] ` <1459614351-16731-6-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-02 16:25 ` [PATCH v3 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
` (3 subsequent siblings)
8 siblings, 1 reply; 47+ messages in thread
From: Gary Bisson @ 2016-04-02 16:25 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Based on i.MX6 Quad Plus with 4GB of RAM.
https://boundarydevices.com/product/nitrogen6max/
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changes v1 -> v2:
- Disable pcie for nitrogen6qp_max dts
-> required for the board to boot normally
Changes v2 -> v3:
- none
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6qp-nitrogen6_max.dts | 59 ++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 96dc889..54306aa 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -364,6 +364,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-udoo.dtb \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb \
+ imx6qp-nitrogen6_max.dtb \
imx6qp-sabreauto.dtb \
imx6qp-sabresd.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
new file mode 100644
index 0000000..a39b860
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-nitrogen6_max.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX Board";
+ compatible = "boundary,imx6qp-nitrogen6_max", "fsl,imx6qp";
+};
+
+&pcie {
+ status = "disabled";
+};
+
+&sata {
+ status = "okay";
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v3 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
[not found] ` <1459614351-16731-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (4 preceding siblings ...)
2016-04-02 16:25 ` [PATCH v3 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
@ 2016-04-02 16:25 ` Gary Bisson
[not found] ` <1459614351-16731-7-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-02 16:25 ` [PATCH v3 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
` (2 subsequent siblings)
8 siblings, 1 reply; 47+ messages in thread
From: Gary Bisson @ 2016-04-02 16:25 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Based on i.MX6 SoloX with 1GB of RAM.
https://boundarydevices.com/product/nit6_solox-imx6/
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changes v1 -> v2:
- Remove lines commented out from nitrogen6sx dts as suggested by Vladimir
Changes v2 -> v3:
- none
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 732 +++++++++++++++++++++++++++++++
2 files changed, 733 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 54306aa..9eab5f5 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -371,6 +371,7 @@ dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SX) += \
+ imx6sx-nitrogen6sx.dtb \
imx6sx-sabreauto.dtb \
imx6sx-sdb-reva.dtb \
imx6sx-sdb.dtb
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
new file mode 100644
index 0000000..9f3056c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -0,0 +1,732 @@
+/*
+ * Copyright (C) 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board";
+ compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx";
+
+ aliases {
+ fb_lcd = &lcdif1;
+ t_lcd = &t_lcd;
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ backlight_lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ power-supply = <®_3p3v>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_1p8v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_can1_3v3: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "can1-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_can2_3v3: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "can2-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_usb_otg1_vbus: regulator@4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wlan: regulator@5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_wlan>;
+ compatible = "regulator-fixed";
+ clocks = <&clks IMX6SX_CLK_CKO>;
+ clock-names = "slow";
+ reg = <5>;
+ regulator-name = "wlan-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <70000>;
+ gpio = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx6sx-nitrogen6sx-sgtl5000";
+ cpu-dai = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <5>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "microchip,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0xC0000>;
+ read-only;
+ };
+ partition@C0000 {
+ label = "env";
+ reg = <0xC0000 0x2000>;
+ read-only;
+ };
+ partition@C2000 {
+ label = "Kernel";
+ reg = <0xC2000 0x11e000>;
+ };
+ partition@1E0000 {
+ label = "M4";
+ reg = <0x1E0000 0x20000>;
+ };
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+ phy-supply = <®_3p3v>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ ethphy2: ethernet-phy@5 {
+ reg = <5>;
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy2>;
+ phy-supply = <®_3p3v>;
+ fsl,magic-packet;
+ status = "okay";
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can1_3v3>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can2_3v3>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
+ reg = <0x0a>;
+ clocks = <&clks IMX6SX_CLK_CKO2>;
+ VDDA-supply = <®_1p8v>;
+ VDDIO-supply = <®_1p8v>;
+ VDDD-supply = <®_1p8v>;
+ assigned-clocks = <&clks IMX6SX_CLK_CKO2_SEL>,
+ <&clks IMX6SX_CLK_CKO2>;
+ assigned-clock-parents = <&clks IMX6SX_CLK_OSC>;
+ assigned-clock-rates = <0>, <24000000>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&lcdif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif1>;
+ lcd-supply = <®_3p3v>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ bits-per-pixel = <16>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&t_lcd>;
+ t_lcd: t_lcd_default {
+ clock-frequency = <74160000>;
+ hactive = <1280>;
+ vactive = <720>;
+ hback-porch = <220>;
+ hfront-porch = <110>;
+ vback-porch = <20>;
+ vfront-porch = <5>;
+ hsync-len = <40>;
+ vsync-len = <5>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-master";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ status = "okay";
+};
+
+&usbotg2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2>;
+ dr_mode = "host";
+ disable-over-current;
+ reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <4>;
+ non-removable;
+ keep-power-in-suspend;
+ vmmc-supply = <®_wlan>;
+ cap-power-off-card;
+ cap-sdio-irq;
+ vqmmc-1-8-v;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio7>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ };
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&usdhc4 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
+ pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ vqmmc-1-8-v;
+ vmmc-supply = <®_1p8v>;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6sx-nitrogen6sx {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD 0x1b0b0
+ MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC 0x1b0b0
+ MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x1b0b0
+ MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD 0x1b0b0
+ >;
+ };
+
+ pinctrl_bt_rfkill: bt-rfkillgrp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+ MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+ MX6SX_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+ MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x0b0b1
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0x1b0b0
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0x1b0b0
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0x30b1
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0x30b1
+ MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0x30b1
+ MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0x30b1
+ MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0x30b1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0x30b1
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
+ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
+ MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0xb0b0
+ MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4 0xb0b0
+ MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5 0xb0b0
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x30b1
+ MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x30b1
+ MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0x30b1
+ MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0x30b1
+ MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0x30b1
+ MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x30b1
+ MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
+ MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
+ MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0xb0b0
+ MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8 0xb0b0
+ MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0xb0b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b0b0
+ MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x0b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b0b0
+ MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24 0x0b0b0
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1 0x1b0b0
+ MX6SX_PAD_NAND_CLE__GPIO4_IO_3 0x1b0b0
+ MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x1b0b0
+ MX6SX_PAD_NAND_WE_B__GPIO4_IO_14 0x1b0b0
+ MX6SX_PAD_NAND_WP_B__GPIO4_IO_15 0x1b0b0
+ MX6SX_PAD_NAND_READY_B__GPIO4_IO_13 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x1b0b0
+ MX6SX_PAD_SD1_CMD__CCM_CLKO1 0x000b0
+ MX6SX_PAD_SD3_DATA5__GPIO7_IO_7 0x1b0b0
+ /* Test points */
+ MX6SX_PAD_NAND_DATA04__GPIO4_IO_8 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
+ MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_lcdif1: lcdif1grp {
+ fsl,pins = <
+ MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
+ MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+ MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+ >;
+ };
+
+ pinctrl_lvds: lvdsgrp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21 0xb0b0
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0xb0b0
+ MX6SX_PAD_NAND_DATA06__GPIO4_IO_10 0xb0b0
+ MX6SX_PAD_NAND_DATA07__GPIO4_IO_11 0xb0b0
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO13__PWM4_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_reg_wlan: reg-wlangrp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_DATA4__GPIO7_IO_6 0x1b0b0
+ MX6SX_PAD_GPIO1_IO11__CCM_CLKO1 0x000b0
+ >;
+ };
+
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO12__CCM_CLKO2 0x000b0
+ MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x1b0b0
+ MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x1b0b0
+ MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22 0xb0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x1b0b1
+ MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
+ MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
+ MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x1b0b1
+ MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x1b0b0
+ MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x170b1
+ >;
+ };
+
+ pinctrl_usbotg1_vbus: usbotg1-vbusgrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x1b0b0
+ >;
+ };
+
+ pinctrl_usbotg2: usbotg2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26 0xb0b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
+ MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10071
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17071
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17071
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17071
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17071
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17071
+ >;
+ };
+
+ pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10071
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17071
+ MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x17071
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17071
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17071
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17071
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17071
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17071
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17071
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17071
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17071
+ >;
+ };
+ pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9
+ >;
+ };
+ };
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v3 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
[not found] ` <1459614351-16731-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (5 preceding siblings ...)
2016-04-02 16:25 ` [PATCH v3 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
@ 2016-04-02 16:25 ` Gary Bisson
[not found] ` <1459614351-16731-8-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-02 16:25 ` [PATCH v3 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
2016-04-02 16:25 ` [PATCH v3 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
8 siblings, 1 reply; 47+ messages in thread
From: Gary Bisson @ 2016-04-02 16:25 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
Those two touch controllers are used by Boundary Devices platforms.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changes v1 -> v2:
- none
Changes v2 -> v3:
- none
---
arch/arm/configs/imx_v6_v7_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 978c5de..49dd816 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -162,7 +162,9 @@ CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
+CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_MC13783=y
+CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SX8654=y
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v3 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
[not found] ` <1459614351-16731-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (6 preceding siblings ...)
2016-04-02 16:25 ` [PATCH v3 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
@ 2016-04-02 16:25 ` Gary Bisson
2016-04-02 16:25 ` [PATCH v3 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
8 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-04-02 16:25 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
I2C muxing is used on Nitrogen6_MAX board from Boundary Devices.
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changes v1 -> v2:
- none
Changes v2 -> v3:
- none
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 49dd816..1faafe3 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -180,6 +180,7 @@ CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v3 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
[not found] ` <1459614351-16731-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
` (7 preceding siblings ...)
2016-04-02 16:25 ` [PATCH v3 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
@ 2016-04-02 16:25 ` Gary Bisson
8 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-04-02 16:25 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
The rv4168 RTC is used by the following platforms:
- Nitrogen6_MAX (both Quad and Quad Plus versions)
- Nitrogen7
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changes v1 -> v2:
- none
Changes v2 -> v3:
- none
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 1faafe3..af22ea4 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -316,6 +316,7 @@ CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MXC=y
CONFIG_RTC_DRV_SNVS=y
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH v3 1/9] ARM: dts: imx7d: add lcdif support
[not found] ` <1459614351-16731-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
@ 2016-04-06 9:06 ` Shawn Guo
0 siblings, 0 replies; 47+ messages in thread
From: Shawn Guo @ 2016-04-06 9:06 UTC (permalink / raw)
To: Gary Bisson
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR
On Sat, Apr 02, 2016 at 06:25:43PM +0200, Gary Bisson wrote:
> Add the device node for the i.MX7 eLCDIF interface.
>
> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
Applied 1 ~ 3, thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH v3 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board
[not found] ` <1459614351-16731-5-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
@ 2016-04-06 14:15 ` Shawn Guo
2016-04-07 10:07 ` Gary Bisson
2016-04-07 13:50 ` [PATCH v4] " Gary Bisson
1 sibling, 1 reply; 47+ messages in thread
From: Shawn Guo @ 2016-04-06 14:15 UTC (permalink / raw)
To: Gary Bisson
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR
On Sat, Apr 02, 2016 at 06:25:46PM +0200, Gary Bisson wrote:
> Based on i.MX7 Dual with 1GB of RAM.
>
> https://boundarydevices.com/product/nitrogen7/
>
> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
> ---
>
> Changes v1 -> v2:
> - none
> Changes v2 -> v3:
> - Fix Nitrogen7 BT UART clock parent
> - Fix Nitrogen7 lvdo2 node to be always-on
>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx7d-nitrogen7.dts | 819 ++++++++++++++++++++++++++++++++++
> 2 files changed, 820 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx7d-nitrogen7.dts
<snip>
> +/ {
> + model = "Boundary Devices i.MX7 Nitrogen7 Board";
> + compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
> +
> + aliases {
> + fb_lcd = &lcdif;
> + t_lcd = &t_lcd;
> + };
> +
> + memory {
> + reg = <0x80000000 0x40000000>;
> + };
> +
> + backlight_j9 {
Use hyphen instead of underscore in node name.
> + compatible = "gpio-backlight";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_backlight_j9>;
> + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> + default-on;
> + };
> +
> + backlight_j20 {
> + compatible = "pwm-backlight";
> + pwms = <&pwm1 0 5000000>;
> + brightness-levels = <0 4 8 16 32 64 128 255>;
> + default-brightness-level = <6>;
> + status = "okay";
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
DT maintainers do not like this fake "simple-bus". Please put all these
fixed regulators directly under root node in the naming schema below.
reg_xxx: regulator-xxx {
...
};
> +
> + reg_usb_otg1_vbus: regulator@0 {
> + compatible = "regulator-fixed";
> + reg = <0>;
> + regulator-name = "usb_otg1_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
<snip>
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
> + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
> + control-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
> + uart-has-rs485-half-duplex;
> + rs485-mode = <1>;
The above 3 properties are undefined?
> + status = "okay";
> +};
> +
> +&uart6 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart6>;
> + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
> + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
> + fsl,uart-has-rtscts;
> + status = "okay";
> +};
> +
> +&usbotg1 {
> + vbus-supply = <®_usb_otg1_vbus>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg1>;
> + status = "okay";
> +};
> +
> +&usbotg2 {
> + vbus-supply = <®_usb_otg2_vbus>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg2>;
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
> + vmmc-supply = <&vgen3_reg>;
> + bus-width = <4>;
> + fsl,tuning-step = <2>;
> + wakeup-source;
> + keep-power-in-suspend;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + bus-width = <4>;
> + non-removable;
> + vmmc-supply = <®_wlan>;
> + vqmmc-1-8-v;
Unsupported property?
> + cap-power-off-card;
> + keep-power-in-suspend;
> + status = "okay";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
Move these two up to the top of property list.
> + wlcore: wlcore@2 {
> + compatible = "ti,wl1271";
> + reg = <2>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
> + ref-clock-frequency = <38400000>;
> + };
> +};
> +
> +&usdhc3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc3>;
> + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
> + assigned-clock-rates = <400000000>;
> + bus-width = <8>;
> + fsl,tuning-step = <2>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog1>;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>;
> +
> + imx7d-nitrogen7 {
Since commit 5fcdf6a7ed95 (pinctrl: imx: Allow parsing DT without
function nodes), we can drop this container code to save one level of
indentation.
> + pinctrl_hog_1: hoggrp-1 {
> + fsl,pins = <
> + MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x5d
> + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x7d
> + MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x7d
> + >;
> + };
> +
> + pinctrl_bt_rfkill: btrfkillgrp {
> + fsl,pins = <
> + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x7d
> + >;
> + };
Drop unused pinctrl entries, and let's add it when needed.
> +
> + pinctrl_enet1: enet1grp {
> + fsl,pins = <
> + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
> + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3
> + MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x3
> + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71
> + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71
> + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71
> + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71
> + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71
> + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71
> + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x71
> + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11
> + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11
> + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11
> + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x71
> + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11
> + MX7D_PAD_SD3_STROBE__GPIO6_IO10 0x75 /* Reset */
> + >;
> + };
> +
> + pinctrl_flash: flashgrp {
Ditto
> + fsl,pins = <
> + MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x71
> + MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x71
> + MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x7d
> + MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x7d
> + MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x71
> + MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x71
> + >;
> + };
<snip>
> +&iomuxc_lpsr {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog_2>;
> +
> + imx7d-nitrogen7 {
Drop this container node.
Shawn
> + pinctrl_hog_2: hoggrp-2 {
> + fsl,pins = <
> + MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x7d
> + MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x7d
> + >;
> + };
> +
> + pinctrl_backlight_j9: backlightj9grp {
> + fsl,pins = <
> + MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x7d
> + >;
> + };
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x7d
> + >;
> + };
> +
> + pinctrl_usbotg1: usbotg1grp {
> + fsl,pins = <
> + MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x7d
> + MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14
> + >;
> + };
> +
> + pinctrl_wdog1: wdog1grp {
> + fsl,pins = <
> + MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x75
> + >;
> + };
> + };
> +};
> --
> 2.7.0
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH v3 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board
[not found] ` <1459614351-16731-6-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
@ 2016-04-06 14:25 ` Shawn Guo
0 siblings, 0 replies; 47+ messages in thread
From: Shawn Guo @ 2016-04-06 14:25 UTC (permalink / raw)
To: Gary Bisson
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR
On Sat, Apr 02, 2016 at 06:25:47PM +0200, Gary Bisson wrote:
> Based on i.MX6 Quad Plus with 4GB of RAM.
>
> https://boundarydevices.com/product/nitrogen6max/
>
> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
Applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH v3 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
[not found] ` <1459614351-16731-8-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
@ 2016-04-06 14:35 ` Shawn Guo
0 siblings, 0 replies; 47+ messages in thread
From: Shawn Guo @ 2016-04-06 14:35 UTC (permalink / raw)
To: Gary Bisson
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR
On Sat, Apr 02, 2016 at 06:25:49PM +0200, Gary Bisson wrote:
> Those two touch controllers are used by Boundary Devices platforms.
>
> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
Applied 7 ~ 9, thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH v3 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board
2016-04-06 14:15 ` Shawn Guo
@ 2016-04-07 10:07 ` Gary Bisson
0 siblings, 0 replies; 47+ messages in thread
From: Gary Bisson @ 2016-04-07 10:07 UTC (permalink / raw)
To: Shawn Guo
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Sascha Hauer, Rob Herring,
fabio.estevam-3arQi8VN3Tc,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Russell King,
Michael Turquette, Troy Kisky
HI Shawn,
On Wed, Apr 6, 2016 at 4:15 PM, Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> On Sat, Apr 02, 2016 at 06:25:46PM +0200, Gary Bisson wrote:
>> Based on i.MX7 Dual with 1GB of RAM.
>>
>> https://boundarydevices.com/product/nitrogen7/
>>
>> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
>> ---
>>
>> Changes v1 -> v2:
>> - none
>> Changes v2 -> v3:
>> - Fix Nitrogen7 BT UART clock parent
>> - Fix Nitrogen7 lvdo2 node to be always-on
>>
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/imx7d-nitrogen7.dts | 819 ++++++++++++++++++++++++++++++++++
>> 2 files changed, 820 insertions(+)
>> create mode 100644 arch/arm/boot/dts/imx7d-nitrogen7.dts
>
> <snip>
>
>> +/ {
>> + model = "Boundary Devices i.MX7 Nitrogen7 Board";
>> + compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
>> +
>> + aliases {
>> + fb_lcd = &lcdif;
>> + t_lcd = &t_lcd;
>> + };
>> +
>> + memory {
>> + reg = <0x80000000 0x40000000>;
>> + };
>> +
>> + backlight_j9 {
>
> Use hyphen instead of underscore in node name.
Sorry I forgot about that.
>> + compatible = "gpio-backlight";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_backlight_j9>;
>> + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
>> + default-on;
>> + };
>> +
>> + backlight_j20 {
>> + compatible = "pwm-backlight";
>> + pwms = <&pwm1 0 5000000>;
>> + brightness-levels = <0 4 8 16 32 64 128 255>;
>> + default-brightness-level = <6>;
>> + status = "okay";
>> + };
>> +
>> + regulators {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>
> DT maintainers do not like this fake "simple-bus". Please put all these
> fixed regulators directly under root node in the naming schema below.
>
> reg_xxx: regulator-xxx {
> ...
> };
Ok, good to know, will be fixed in v4.
>> +
>> + reg_usb_otg1_vbus: regulator@0 {
>> + compatible = "regulator-fixed";
>> + reg = <0>;
>> + regulator-name = "usb_otg1_vbus";
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
>> + enable-active-high;
>> + };
>
> <snip>
>
>> +&uart3 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_uart3>;
>> + assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
>> + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
>> + control-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
>> + uart-has-rs485-half-duplex;
>> + rs485-mode = <1>;
>
> The above 3 properties are undefined?
You're right, the mainline i.MX UART driver doesn't have those.
>> + status = "okay";
>> +};
>> +
>> +&uart6 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_uart6>;
>> + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
>> + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
>> + fsl,uart-has-rtscts;
>> + status = "okay";
>> +};
>> +
>> +&usbotg1 {
>> + vbus-supply = <®_usb_otg1_vbus>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_usbotg1>;
>> + status = "okay";
>> +};
>> +
>> +&usbotg2 {
>> + vbus-supply = <®_usb_otg2_vbus>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_usbotg2>;
>> + dr_mode = "host";
>> + status = "okay";
>> +};
>> +
>> +&usdhc1 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_usdhc1>;
>> + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
>> + vmmc-supply = <&vgen3_reg>;
>> + bus-width = <4>;
>> + fsl,tuning-step = <2>;
>> + wakeup-source;
>> + keep-power-in-suspend;
>> + status = "okay";
>> +};
>> +
>> +&usdhc2 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_usdhc2>;
>> + bus-width = <4>;
>> + non-removable;
>> + vmmc-supply = <®_wlan>;
>> + vqmmc-1-8-v;
>
> Unsupported property?
Same here.
>> + cap-power-off-card;
>> + keep-power-in-suspend;
>> + status = "okay";
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>
> Move these two up to the top of property list.
Ok.
>> + wlcore: wlcore@2 {
>> + compatible = "ti,wl1271";
>> + reg = <2>;
>> + interrupt-parent = <&gpio4>;
>> + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
>> + ref-clock-frequency = <38400000>;
>> + };
>> +};
>> +
>> +&usdhc3 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_usdhc3>;
>> + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
>> + assigned-clock-rates = <400000000>;
>> + bus-width = <8>;
>> + fsl,tuning-step = <2>;
>> + non-removable;
>> + status = "okay";
>> +};
>> +
>> +&wdog1 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_wdog1>;
>> + status = "okay";
>> +};
>> +
>> +&iomuxc {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>;
>> +
>> + imx7d-nitrogen7 {
>
> Since commit 5fcdf6a7ed95 (pinctrl: imx: Allow parsing DT without
> function nodes), we can drop this container code to save one level of
> indentation.
Great, that will remove all the over 80 lines with checkpatch.
>> + pinctrl_hog_1: hoggrp-1 {
>> + fsl,pins = <
>> + MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x5d
>> + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x7d
>> + MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x7d
>> + >;
>> + };
>> +
>> + pinctrl_bt_rfkill: btrfkillgrp {
>> + fsl,pins = <
>> + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x7d
>> + >;
>> + };
>
> Drop unused pinctrl entries, and let's add it when needed.
Ok, makes sense.
>> +
>> + pinctrl_enet1: enet1grp {
>> + fsl,pins = <
>> + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
>> + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3
>> + MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x3
>> + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71
>> + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71
>> + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71
>> + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71
>> + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71
>> + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71
>> + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x71
>> + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11
>> + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11
>> + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11
>> + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x71
>> + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11
>> + MX7D_PAD_SD3_STROBE__GPIO6_IO10 0x75 /* Reset */
>> + >;
>> + };
>> +
>> + pinctrl_flash: flashgrp {
>
> Ditto
>
>> + fsl,pins = <
>> + MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x71
>> + MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x71
>> + MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x7d
>> + MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x7d
>> + MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x71
>> + MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x71
>> + >;
>> + };
>
> <snip>
>
>> +&iomuxc_lpsr {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_hog_2>;
>> +
>> + imx7d-nitrogen7 {
>
> Drop this container node.
I'll submit a v4 shortly. I'll also make sure to do the same on the
6SX device tree.
Regards,
Gary
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v4] ARM: dts: imx: add Boundary Devices Nitrogen7 board
[not found] ` <1459614351-16731-5-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-06 14:15 ` Shawn Guo
@ 2016-04-07 13:50 ` Gary Bisson
[not found] ` <1460037057-23191-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
1 sibling, 1 reply; 47+ messages in thread
From: Gary Bisson @ 2016-04-07 13:50 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, Gary Bisson
Based on i.MX7 Dual with 1GB of RAM.
https://boundarydevices.com/product/nitrogen7/
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changes v1 -> v2:
- none
Changes v2 -> v3:
- Fix Nitrogen7 BT UART clock parent
- Fix Nitrogen7 lvdo2 node to be always-on
Changes v3 -> v4:
- Use hyphen instead of underscore for backlight node names
- Remove fake "simple-bus" for regulators declaration
- Remove non existant rs485 properties
- Remove non existant vqmmc-1-8v property
- Remove unused pinctrl entries (rfkill, flash, pcie, usdhc, sai)
- Remove pinctrl unnecessary container node
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx7d-nitrogen7.dts | 745 ++++++++++++++++++++++++++++++++++
2 files changed, 746 insertions(+)
create mode 100644 arch/arm/boot/dts/imx7d-nitrogen7.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 84008a7..54306aa 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -381,6 +381,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-tx6ul-mainboard.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
+ imx7d-nitrogen7.dtb \
imx7d-sbc-imx7.dtb \
imx7d-sdb.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
new file mode 100644
index 0000000..1ce9780
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -0,0 +1,745 @@
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7d.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX7 Nitrogen7 Board";
+ compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
+
+ aliases {
+ fb_lcd = &lcdif;
+ t_lcd = &t_lcd;
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ backlight-j9 {
+ compatible = "gpio-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight_j9>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ default-on;
+ };
+
+ backlight-j20 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can2_3v3: regulator-can2-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "can2-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_vref_1v8: regulator-vref-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_vref_3v3: regulator-vref-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_wlan: regulator-wlan {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+ clock-names = "slow";
+ regulator-name = "reg_wlan";
+ startup-delay-us = <70000>;
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&adc2 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+ <&clks IMX7D_CLKO2_ROOT_DIV>;
+ assigned-clock-parents = <&clks IMX7D_CKIL>;
+ assigned-clock-rates = <0>, <32768>;
+};
+
+&cpu0 {
+ arm-supply = <&sw1a_reg>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+ };
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can2_3v3>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze3000@08 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* use sw1c_reg to align with pfuze100/pfuze200 */
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ rtc@68 {
+ compatible = "rv4162";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_rv4162>;
+ reg = <0x68>;
+ interrupts-extended = <&gpio2 15 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ touch@48 {
+ compatible = "ti,tsc2004";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_tsc2004>;
+ interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ codec: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clock-names = "mclk";
+ wlf,shared-lrclk;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ lcd-supply = <®_vref_3v3>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: lcd-display {
+ bits-per-pixel = <16>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&t_lcd>;
+ t_lcd: t_lcd_default {
+ /* default to Okaya display */
+ clock-frequency = <30000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <48>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <3>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vgen3_reg>;
+ bus-width = <4>;
+ fsl,tuning-step = <2>;
+ wakeup-source;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&usdhc2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_wlan>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ status = "okay";
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <8>;
+ fsl,tuning-step = <2>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog1>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>;
+
+ pinctrl_hog_1: hoggrp-1 {
+ fsl,pins = <
+ MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x5d
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x7d
+ MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x7d
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
+ MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3
+ MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x3
+ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71
+ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71
+ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x71
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11
+ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11
+ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x71
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11
+ MX7D_PAD_SD3_STROBE__GPIO6_IO10 0x75
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x7d
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x7d
+ MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x7d
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2_rv4162: i2c2-rv4162grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x7d
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c3_tsc2004: i2c3tsc2004grp {
+ fsl,pins = <
+ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x79
+ MX7D_PAD_SD2_WP__GPIO5_IO10 0x7d
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
+ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_j2: j2grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x7d
+ MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x7d
+ MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x7d
+ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x7d
+ MX7D_PAD_SD1_WP__GPIO5_IO1 0x7d
+ MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x7d
+ MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x7d
+ MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x7d
+ MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x7d
+ MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x7d
+ MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x7d
+ MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x7d
+ MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x7d
+ MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x7d
+ MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x7d
+ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x7d
+ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x7d
+ MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x7d
+ MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x7d
+ MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x7d
+ MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x7d
+ MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x7d
+ MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22 0x7d
+ MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x7d
+ MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20 0x7d
+ MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x7d
+ MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19 0x7d
+ MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x7d
+ MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x7d
+ MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x7d
+ MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x7d
+ MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x7d
+ MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x7d
+ MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x7d
+ MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x7d
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7d
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
+ MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x79
+ MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x79
+ MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x79
+ MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x7d
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79
+ MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79
+ MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79
+ MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79
+ >;
+ };
+
+ pinctrl_usbotg2: usbotg2grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x7d
+ MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x75
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x75
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x59
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x19
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
+ MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x59
+ MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x19
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
+ >;
+ };
+};
+
+&iomuxc_lpsr {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_2>;
+
+ pinctrl_hog_2: hoggrp-2 {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x7d
+ MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x7d
+ >;
+ };
+
+ pinctrl_backlight_j9: backlightj9grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x7d
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x7d
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x7d
+ MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14
+ >;
+ };
+
+ pinctrl_wdog1: wdog1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x75
+ >;
+ };
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* [PATCH v4] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
[not found] ` <1459614351-16731-7-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
@ 2016-04-07 13:52 ` Gary Bisson
[not found] ` <1460037168-23292-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
0 siblings, 1 reply; 47+ messages in thread
From: Gary Bisson @ 2016-04-07 13:52 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, Gary Bisson
Based on i.MX6 SoloX with 1GB of RAM.
https://boundarydevices.com/product/nit6_solox-imx6/
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changes v1 -> v2:
- Remove lines commented out from nitrogen6sx dts as suggested by Vladimir
Changes v2 -> v3:
- none
Changes v3 -> v4:
- Use hyphen instead of underscore for backlight node name
- Remove fake "simple-bus" for regulators declaration
- Remove non existant vqmmc-1-8v property
- Remove unused pinctrl entries (rfkill, lvds)
- Remove pinctrl unnecessary container node
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 706 +++++++++++++++++++++++++++++++
2 files changed, 707 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 54306aa..9eab5f5 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -371,6 +371,7 @@ dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SX) += \
+ imx6sx-nitrogen6sx.dtb \
imx6sx-sabreauto.dtb \
imx6sx-sdb-reva.dtb \
imx6sx-sdb.dtb
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
new file mode 100644
index 0000000..ea3fa7e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -0,0 +1,706 @@
+/*
+ * Copyright (C) 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board";
+ compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx";
+
+ aliases {
+ fb_lcd = &lcdif1;
+ t_lcd = &t_lcd;
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ backlight-lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ power-supply = <®_3p3v>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_can1_3v3: regulator-can1-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "can1-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_can2_3v3: regulator-can2-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "can2-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wlan: regulator-wlan {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_wlan>;
+ compatible = "regulator-fixed";
+ clocks = <&clks IMX6SX_CLK_CKO>;
+ clock-names = "slow";
+ regulator-name = "wlan-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <70000>;
+ gpio = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx6sx-nitrogen6sx-sgtl5000";
+ cpu-dai = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <5>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "microchip,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0xC0000>;
+ read-only;
+ };
+ partition@C0000 {
+ label = "env";
+ reg = <0xC0000 0x2000>;
+ read-only;
+ };
+ partition@C2000 {
+ label = "Kernel";
+ reg = <0xC2000 0x11e000>;
+ };
+ partition@1E0000 {
+ label = "M4";
+ reg = <0x1E0000 0x20000>;
+ };
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+ phy-supply = <®_3p3v>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ ethphy2: ethernet-phy@5 {
+ reg = <5>;
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy2>;
+ phy-supply = <®_3p3v>;
+ fsl,magic-packet;
+ status = "okay";
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can1_3v3>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can2_3v3>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
+ reg = <0x0a>;
+ clocks = <&clks IMX6SX_CLK_CKO2>;
+ VDDA-supply = <®_1p8v>;
+ VDDIO-supply = <®_1p8v>;
+ VDDD-supply = <®_1p8v>;
+ assigned-clocks = <&clks IMX6SX_CLK_CKO2_SEL>,
+ <&clks IMX6SX_CLK_CKO2>;
+ assigned-clock-parents = <&clks IMX6SX_CLK_OSC>;
+ assigned-clock-rates = <0>, <24000000>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&lcdif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif1>;
+ lcd-supply = <®_3p3v>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ bits-per-pixel = <16>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&t_lcd>;
+ t_lcd: t_lcd_default {
+ clock-frequency = <74160000>;
+ hactive = <1280>;
+ vactive = <720>;
+ hback-porch = <220>;
+ hfront-porch = <110>;
+ vback-porch = <20>;
+ vfront-porch = <5>;
+ hsync-len = <40>;
+ vsync-len = <5>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-master";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ status = "okay";
+};
+
+&usbotg2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2>;
+ dr_mode = "host";
+ disable-over-current;
+ reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&usdhc3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <4>;
+ non-removable;
+ keep-power-in-suspend;
+ vmmc-supply = <®_wlan>;
+ cap-power-off-card;
+ cap-sdio-irq;
+ vqmmc-1-8-v;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio7>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ };
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&usdhc4 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
+ pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <®_1p8v>;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD 0x1b0b0
+ MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC 0x1b0b0
+ MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x1b0b0
+ MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+ MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+ MX6SX_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+ MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x0b0b1
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0x1b0b0
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0x1b0b0
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0x30b1
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0x30b1
+ MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0x30b1
+ MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0x30b1
+ MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0x30b1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0x30b1
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
+ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
+ MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0xb0b0
+ MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4 0xb0b0
+ MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5 0xb0b0
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x30b1
+ MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x30b1
+ MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0x30b1
+ MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0x30b1
+ MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0x30b1
+ MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x30b1
+ MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
+ MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
+ MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0xb0b0
+ MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8 0xb0b0
+ MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0xb0b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b0b0
+ MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x0b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b0b0
+ MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24 0x0b0b0
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1 0x1b0b0
+ MX6SX_PAD_NAND_CLE__GPIO4_IO_3 0x1b0b0
+ MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x1b0b0
+ MX6SX_PAD_NAND_WE_B__GPIO4_IO_14 0x1b0b0
+ MX6SX_PAD_NAND_WP_B__GPIO4_IO_15 0x1b0b0
+ MX6SX_PAD_NAND_READY_B__GPIO4_IO_13 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x1b0b0
+ MX6SX_PAD_SD1_CMD__CCM_CLKO1 0x000b0
+ MX6SX_PAD_SD3_DATA5__GPIO7_IO_7 0x1b0b0
+ /* Test points */
+ MX6SX_PAD_NAND_DATA04__GPIO4_IO_8 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
+ MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_lcdif1: lcdif1grp {
+ fsl,pins = <
+ MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
+ MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+ MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0xb0b0
+ MX6SX_PAD_NAND_DATA06__GPIO4_IO_10 0xb0b0
+ MX6SX_PAD_NAND_DATA07__GPIO4_IO_11 0xb0b0
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO13__PWM4_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_reg_wlan: reg-wlangrp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_DATA4__GPIO7_IO_6 0x1b0b0
+ MX6SX_PAD_GPIO1_IO11__CCM_CLKO1 0x000b0
+ >;
+ };
+
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO12__CCM_CLKO2 0x000b0
+ MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x1b0b0
+ MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x1b0b0
+ MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22 0xb0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x1b0b1
+ MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
+ MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
+ MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x1b0b1
+ MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x1b0b0
+ MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x170b1
+ >;
+ };
+
+ pinctrl_usbotg1_vbus: usbotg1-vbusgrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x1b0b0
+ >;
+ };
+
+ pinctrl_usbotg2: usbotg2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26 0xb0b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
+ MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10071
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17071
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17071
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17071
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17071
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17071
+ >;
+ };
+
+ pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10071
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17071
+ MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x17071
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17071
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17071
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17071
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17071
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17071
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17071
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17071
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17071
+ >;
+ };
+
+ pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9
+ >;
+ };
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH v4] ARM: dts: imx: add Boundary Devices Nitrogen7 board
[not found] ` <1460037057-23191-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
@ 2016-04-11 14:13 ` Shawn Guo
0 siblings, 0 replies; 47+ messages in thread
From: Shawn Guo @ 2016-04-11 14:13 UTC (permalink / raw)
To: Gary Bisson
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-lFZ/pmaqli7XmaaqVzeoHQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Thu, Apr 07, 2016 at 03:50:57PM +0200, Gary Bisson wrote:
> Based on i.MX7 Dual with 1GB of RAM.
>
> https://boundarydevices.com/product/nitrogen7/
>
> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
Applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [PATCH v4] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
[not found] ` <1460037168-23292-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
@ 2016-04-11 14:31 ` Shawn Guo
2016-04-11 21:01 ` [PATCH v5] " Gary Bisson
1 sibling, 0 replies; 47+ messages in thread
From: Shawn Guo @ 2016-04-11 14:31 UTC (permalink / raw)
To: Gary Bisson
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ
On Thu, Apr 07, 2016 at 03:52:48PM +0200, Gary Bisson wrote:
<snip>
> +&ecspi1 {
> + fsl,spi-num-chipselects = <1>;
> + cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1>;
> + status = "okay";
> +
> + flash: m25p80@0 {
> + compatible = "microchip,sst25vf016b";
> + spi-max-frequency = <20000000>;
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
Have a new line between properties and sub-nodes.
> + partition@0 {
> + label = "U-Boot";
> + reg = <0x0 0xC0000>;
Please use lowercase for all hex values in device tree source.
> + read-only;
> + };
Have a new line between nodes.
> + partition@C0000 {
> + label = "env";
> + reg = <0xC0000 0x2000>;
> + read-only;
> + };
> + partition@C2000 {
> + label = "Kernel";
> + reg = <0xC2000 0x11e000>;
> + };
> + partition@1E0000 {
> + label = "M4";
> + reg = <0x1E0000 0x20000>;
> + };
> + };
> +};
<snip>
> +&ssi1 {
> + fsl,mode = "i2s-master";
Take a look at Documentation/devicetree/bindings/sound/fsl,ssi.txt.
fsl,mode is only for AC97 interface now.
> + status = "okay";
> +};
<snip>
> +&usdhc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + bus-width = <4>;
> + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> + keep-power-in-suspend;
> + enable-sdio-wakeup;
Use wakeup-source instead, as enable-sdio-wakeup is deprecated. See
details in bindings/power/wakeup-source.txt.
> + status = "okay";
> +};
> +
> +&usdhc3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc3>;
> + bus-width = <4>;
> + non-removable;
> + keep-power-in-suspend;
> + vmmc-supply = <®_wlan>;
> + cap-power-off-card;
> + cap-sdio-irq;
> + vqmmc-1-8-v;
Your change log says this non-existent property is removed.
> + status = "okay";
> +
> + brcmf: bcrmf@1 {
> + reg = <1>;
> + compatible = "brcm,bcm4329-fmac";
> + interrupt-parent = <&gpio7>;
> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> + };
Have a new line between nodes.
Shawn
> + wlcore: wlcore@2 {
> + compatible = "ti,wl1271";
> + reg = <2>;
> + interrupt-parent = <&gpio7>;
> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> + ref-clock-frequency = <38400000>;
> + };
> +};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
* [PATCH v5] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
[not found] ` <1460037168-23292-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-11 14:31 ` Shawn Guo
@ 2016-04-11 21:01 ` Gary Bisson
[not found] ` <1460408496-21164-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
1 sibling, 1 reply; 47+ messages in thread
From: Gary Bisson @ 2016-04-11 21:01 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ, Gary Bisson
Based on i.MX6 SoloX with 1GB of RAM.
https://boundarydevices.com/product/nit6_solox-imx6/
Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
---
Changes v1 -> v2:
- Remove lines commented out from nitrogen6sx dts as suggested by Vladimir
Changes v2 -> v3:
- none
Changes v3 -> v4:
- Use hyphen instead of underscore for backlight node name
- Remove fake "simple-bus" for regulators declaration
- Remove non existant vqmmc-1-8v property
- Remove unused pinctrl entries (rfkill, lvds)
- Remove pinctrl unnecessary container node
Changes v4 -> v5:
- Remove non existant vqmmc-1-8v for real
- Add new line between properties and sub-nodes
- Use lowercase for all hexadecimal values
- Remove unnecessary fsl,mode of ssi node
- Remove deprecated keep-power-in-suspend
Thanks for all your feedback!
Regards,
Gary
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 709 +++++++++++++++++++++++++++++++
2 files changed, 710 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 54306aa..9eab5f5 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -371,6 +371,7 @@ dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SX) += \
+ imx6sx-nitrogen6sx.dtb \
imx6sx-sabreauto.dtb \
imx6sx-sdb-reva.dtb \
imx6sx-sdb.dtb
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
new file mode 100644
index 0000000..ba62348
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -0,0 +1,709 @@
+/*
+ * Copyright (C) 2016 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board";
+ compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx";
+
+ aliases {
+ fb_lcd = &lcdif1;
+ t_lcd = &t_lcd;
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ backlight-lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ power-supply = <®_3p3v>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_can1_3v3: regulator-can1-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "can1-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_can2_3v3: regulator-can2-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "can2-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_wlan: regulator-wlan {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_wlan>;
+ compatible = "regulator-fixed";
+ clocks = <&clks IMX6SX_CLK_CKO>;
+ clock-names = "slow";
+ regulator-name = "wlan-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <70000>;
+ gpio = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx6sx-nitrogen6sx-sgtl5000";
+ cpu-dai = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <5>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "microchip,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0xc0000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "env";
+ reg = <0xc0000 0x2000>;
+ read-only;
+ };
+
+ partition@c2000 {
+ label = "Kernel";
+ reg = <0xc2000 0x11e000>;
+ };
+
+ partition@1e0000 {
+ label = "M4";
+ reg = <0x1e0000 0x20000>;
+ };
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+ phy-supply = <®_3p3v>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ ethphy2: ethernet-phy@5 {
+ reg = <5>;
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy2>;
+ phy-supply = <®_3p3v>;
+ fsl,magic-packet;
+ status = "okay";
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can1_3v3>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can2_3v3>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
+ reg = <0x0a>;
+ clocks = <&clks IMX6SX_CLK_CKO2>;
+ VDDA-supply = <®_1p8v>;
+ VDDIO-supply = <®_1p8v>;
+ VDDD-supply = <®_1p8v>;
+ assigned-clocks = <&clks IMX6SX_CLK_CKO2_SEL>,
+ <&clks IMX6SX_CLK_CKO2>;
+ assigned-clock-parents = <&clks IMX6SX_CLK_OSC>;
+ assigned-clock-rates = <0>, <24000000>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&lcdif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif1>;
+ lcd-supply = <®_3p3v>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ bits-per-pixel = <16>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&t_lcd>;
+ t_lcd: t_lcd_default {
+ clock-frequency = <74160000>;
+ hactive = <1280>;
+ vactive = <720>;
+ hback-porch = <220>;
+ hfront-porch = <110>;
+ vback-porch = <20>;
+ vfront-porch = <5>;
+ hsync-len = <40>;
+ vsync-len = <5>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ status = "okay";
+};
+
+&usbotg2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2>;
+ dr_mode = "host";
+ disable-over-current;
+ reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ wakeup-source;
+ status = "okay";
+};
+
+&usdhc3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <4>;
+ non-removable;
+ keep-power-in-suspend;
+ vmmc-supply = <®_wlan>;
+ cap-power-off-card;
+ cap-sdio-irq;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio7>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ ref-clock-frequency = <38400000>;
+ };
+};
+
+&usdhc4 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
+ pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <®_1p8v>;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD 0x1b0b0
+ MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC 0x1b0b0
+ MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x1b0b0
+ MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+ MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+ MX6SX_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+ MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x0b0b1
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0x1b0b0
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0x1b0b0
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0x30b1
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0x30b1
+ MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0x30b1
+ MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0x30b1
+ MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0x30b1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0x30b1
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
+ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
+ MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0xb0b0
+ MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4 0xb0b0
+ MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5 0xb0b0
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x30b1
+ MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x30b1
+ MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0x30b1
+ MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0x30b1
+ MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0x30b1
+ MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x30b1
+ MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
+ MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
+ MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0xb0b0
+ MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8 0xb0b0
+ MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0xb0b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b0b0
+ MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x0b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b0b0
+ MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24 0x0b0b0
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1 0x1b0b0
+ MX6SX_PAD_NAND_CLE__GPIO4_IO_3 0x1b0b0
+ MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x1b0b0
+ MX6SX_PAD_NAND_WE_B__GPIO4_IO_14 0x1b0b0
+ MX6SX_PAD_NAND_WP_B__GPIO4_IO_15 0x1b0b0
+ MX6SX_PAD_NAND_READY_B__GPIO4_IO_13 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18 0x1b0b0
+ MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x1b0b0
+ MX6SX_PAD_SD1_CMD__CCM_CLKO1 0x000b0
+ MX6SX_PAD_SD3_DATA5__GPIO7_IO_7 0x1b0b0
+ /* Test points */
+ MX6SX_PAD_NAND_DATA04__GPIO4_IO_8 0x1b0b0
+ MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
+ MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_lcdif1: lcdif1grp {
+ fsl,pins = <
+ MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
+ MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+ MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0xb0b0
+ MX6SX_PAD_NAND_DATA06__GPIO4_IO_10 0xb0b0
+ MX6SX_PAD_NAND_DATA07__GPIO4_IO_11 0xb0b0
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO13__PWM4_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_reg_wlan: reg-wlangrp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_DATA4__GPIO7_IO_6 0x1b0b0
+ MX6SX_PAD_GPIO1_IO11__CCM_CLKO1 0x000b0
+ >;
+ };
+
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO12__CCM_CLKO2 0x000b0
+ MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x1b0b0
+ MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x1b0b0
+ MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22 0xb0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x1b0b1
+ MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
+ MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
+ MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x1b0b1
+ MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x1b0b0
+ MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x170b1
+ >;
+ };
+
+ pinctrl_usbotg1_vbus: usbotg1-vbusgrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x1b0b0
+ >;
+ };
+
+ pinctrl_usbotg2: usbotg2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26 0xb0b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
+ MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10071
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17071
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17071
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17071
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17071
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17071
+ >;
+ };
+
+ pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10071
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17071
+ MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x17071
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17071
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17071
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17071
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17071
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17071
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17071
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17071
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17071
+ >;
+ };
+
+ pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9
+ >;
+ };
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 47+ messages in thread
* Re: [PATCH v5] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board
[not found] ` <1460408496-21164-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
@ 2016-04-12 0:47 ` Shawn Guo
0 siblings, 0 replies; 47+ messages in thread
From: Shawn Guo @ 2016-04-12 0:47 UTC (permalink / raw)
To: Gary Bisson
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ
On Mon, Apr 11, 2016 at 11:01:36PM +0200, Gary Bisson wrote:
> Based on i.MX6 SoloX with 1GB of RAM.
>
> https://boundarydevices.com/product/nit6_solox-imx6/
>
> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
Applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 47+ messages in thread
end of thread, other threads:[~2016-04-12 0:47 UTC | newest]
Thread overview: 47+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-03-15 10:30 [PATCH 0/9] imx: add latest Boundary Devices boards support Gary Bisson
[not found] ` <1458037826-19375-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-03-15 10:30 ` [PATCH 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
2016-03-15 10:30 ` [PATCH 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
2016-03-15 10:30 ` [PATCH 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
2016-03-15 10:30 ` [PATCH 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
2016-03-15 10:30 ` [PATCH 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
2016-03-15 10:30 ` [PATCH 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
[not found] ` <1458037826-19375-7-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-03-15 10:53 ` Vladimir Zapolskiy
[not found] ` <56E7E98F.5030902-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>
2016-03-15 10:58 ` Gary Bisson
2016-03-15 10:30 ` [PATCH 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
2016-03-15 10:30 ` [PATCH 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
2016-03-15 10:30 ` [PATCH 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
2016-03-15 14:04 ` [PATCH v2 0/9] imx: add latest Boundary Devices boards support Gary Bisson
[not found] ` <1458050668-26748-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-03-15 14:04 ` [PATCH v2 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
[not found] ` <1458050668-26748-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-02 1:29 ` Shawn Guo
2016-04-02 16:08 ` Gary Bisson
2016-03-15 14:04 ` [PATCH v2 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
[not found] ` <1458050668-26748-3-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-02 1:31 ` Shawn Guo
2016-04-02 16:10 ` Gary Bisson
2016-03-15 14:04 ` [PATCH v2 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
2016-03-15 14:04 ` [PATCH v2 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
2016-03-15 14:04 ` [PATCH v2 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
2016-03-15 14:04 ` [PATCH v2 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
2016-03-15 14:04 ` [PATCH v2 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
2016-03-15 14:04 ` [PATCH v2 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
2016-03-15 14:04 ` [PATCH v2 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
2016-04-02 16:25 ` [PATCH v3 0/9] imx: add latest Boundary Devices boards support Gary Bisson
[not found] ` <1459614351-16731-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-02 16:25 ` [PATCH v3 1/9] ARM: dts: imx7d: add lcdif support Gary Bisson
[not found] ` <1459614351-16731-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-06 9:06 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 2/9] ARM: dts: imx7d: add flexcan support Gary Bisson
2016-04-02 16:25 ` [PATCH v3 3/9] clk: imx: add ckil clock for i.MX7 Gary Bisson
2016-04-02 16:25 ` [PATCH v3 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Gary Bisson
[not found] ` <1459614351-16731-5-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-06 14:15 ` Shawn Guo
2016-04-07 10:07 ` Gary Bisson
2016-04-07 13:50 ` [PATCH v4] " Gary Bisson
[not found] ` <1460037057-23191-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-11 14:13 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 5/9] ARM: dts: imx: add Boundary Devices Nitrogen6_MAX QP board Gary Bisson
[not found] ` <1459614351-16731-6-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-06 14:25 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 6/9] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Gary Bisson
[not found] ` <1459614351-16731-7-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-07 13:52 ` [PATCH v4] " Gary Bisson
[not found] ` <1460037168-23292-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-11 14:31 ` Shawn Guo
2016-04-11 21:01 ` [PATCH v5] " Gary Bisson
[not found] ` <1460408496-21164-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-12 0:47 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 7/9] ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Gary Bisson
[not found] ` <1459614351-16731-8-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-04-06 14:35 ` Shawn Guo
2016-04-02 16:25 ` [PATCH v3 8/9] ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO Gary Bisson
2016-04-02 16:25 ` [PATCH v3 9/9] ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 Gary Bisson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).