devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ilia Lin <ilialin-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	will.deacon-5wv7dgnIgG8@public.gmane.org,
	rnayak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	qualcomm-lt-cunTk1MwBs8s++Sfvej+rw@public.gmane.org,
	ilialin-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	celster-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	tfinkel-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org
Subject: [PATCH 05/10] clk: qcom: cpu-8996: Add support to switch to alternate PLL
Date: Tue, 12 Dec 2017 14:31:32 +0200	[thread overview]
Message-ID: <1513081897-31612-6-git-send-email-ilialin@codeaurora.org> (raw)
In-Reply-To: <1513081897-31612-1-git-send-email-ilialin-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

From: Rajendra Nayak <rnayak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

Each of the CPU clusters on msm8996 and powered via a primary
PLL and a secondary PLL. The primary PLL is what drivers the
CPU clk, except for times when we are reprogramming the PLL
itself, when we temporarily switch to an alternate PLL.
Use clock rate change notifiers to support this.

Signed-off-by: Rajendra Nayak <rnayak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Signed-off-by: Ilia Lin <ilialin-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
---
 drivers/clk/qcom/clk-cpu-8996.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
index bc60111..9bb25be 100644
--- a/drivers/clk/qcom/clk-cpu-8996.c
+++ b/drivers/clk/qcom/clk-cpu-8996.c
@@ -119,10 +119,14 @@ struct clk_cpu_8996_mux {
 	u32	reg;
 	u32	shift;
 	u32	width;
+	struct notifier_block nb;
 	struct clk_hw	*pll;
 	struct clk_regmap clkr;
 };
 
+#define to_clk_cpu_8996_mux_nb(_nb) \
+	container_of(_nb, struct clk_cpu_8996_mux, nb)
+
 static inline
 struct clk_cpu_8996_mux *to_clk_cpu_8996_mux_hw(struct clk_hw *hw)
 {
@@ -173,6 +177,27 @@ static int clk_cpu_8996_mux_set_parent(struct clk_hw *hw, u8 index)
 	return 0;
 }
 
+int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
+			void *data)
+{
+	int ret;
+	struct clk_cpu_8996_mux *cpuclk = to_clk_cpu_8996_mux_nb(nb);
+
+	switch (event) {
+	case PRE_RATE_CHANGE:
+		ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, ALT_INDEX);
+		break;
+	case POST_RATE_CHANGE:
+		ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, PLL_INDEX);
+		break;
+	default:
+		ret = 0;
+		break;
+	}
+
+	return notifier_from_errno(ret);
+};
+
 const struct clk_ops clk_cpu_8996_mux_ops = {
 	.set_parent = clk_cpu_8996_mux_set_parent,
 	.get_parent = clk_cpu_8996_mux_get_parent,
@@ -216,6 +241,7 @@ static int clk_cpu_8996_mux_set_parent(struct clk_hw *hw, u8 index)
 	.shift = 0,
 	.width = 2,
 	.pll = &pwrcl_pll.clkr.hw,
+	.nb.notifier_call = cpu_clk_notifier_cb,
 	.clkr.hw.init = &(struct clk_init_data) {
 		.name = "pwrcl_pmux",
 		.parent_names = (const char *[]){
@@ -235,6 +261,7 @@ static int clk_cpu_8996_mux_set_parent(struct clk_hw *hw, u8 index)
 	.shift = 0,
 	.width = 2,
 	.pll = &perfcl_pll.clkr.hw,
+	.nb.notifier_call = cpu_clk_notifier_cb,
 	.clkr.hw.init = &(struct clk_init_data) {
 		.name = "perfcl_pmux",
 		.parent_names = (const char *[]){
@@ -310,6 +337,14 @@ struct clk_hw_clks {
 	clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
 	clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config);
 
+	ret = clk_notifier_register(pwrcl_pmux.clkr.hw.clk, &pwrcl_pmux.nb);
+	if (ret)
+		return ret;
+
+	ret = clk_notifier_register(perfcl_pmux.clkr.hw.clk, &perfcl_pmux.nb);
+	if (ret)
+		return ret;
+
 	return ret;
 }
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2017-12-12 12:31 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-12 12:31 [PATCH 00/10] clk: qcom: CPU clock driver for msm8996 Ilia Lin
2017-12-12 12:31 ` [PATCH 01/10] soc: qcom: Separate kryo l2 accessors from PMU driver Ilia Lin
2017-12-12 14:03   ` Mark Rutland
2017-12-22  2:06     ` Stephen Boyd
2018-01-04 11:15       ` ilialin
2018-01-04 11:13     ` ilialin
2017-12-12 12:31 ` [PATCH 02/10] clk: qcom: Fix .set_rate to handle alpha PLLs w/wo dynamic update Ilia Lin
     [not found]   ` <1513081897-31612-3-git-send-email-ilialin-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-12 15:05     ` Julien Thierry
2018-01-04 11:14       ` ilialin
2017-12-12 12:31 ` [PATCH 03/10] clk: qcom: Make clk_alpha_pll_configure available to modules Ilia Lin
2017-12-12 12:31 ` [PATCH 04/10] clk: qcom: Add CPU clock driver for msm8996 Ilia Lin
2017-12-15 22:35   ` Rob Herring
2018-01-04 11:15     ` ilialin
     [not found] ` <1513081897-31612-1-git-send-email-ilialin-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-12 12:31   ` Ilia Lin [this message]
2017-12-12 12:31   ` [PATCH 06/10] clk: qcom: cpu-8996: Add support to switch below 600Mhz Ilia Lin
2017-12-12 12:31   ` [PATCH 08/10] clk: qcom: Add ACD path to CPU clock driver for msm8996 Ilia Lin
2017-12-12 12:31 ` [PATCH 07/10] clk: qcom: clk-cpu-8996: Prepare PLLs on probe Ilia Lin
2017-12-12 12:31 ` [PATCH 09/10] DT: QCOM: Add cpufreq-dt to msm8996 Ilia Lin
2017-12-12 12:31 ` [PATCH 10/10] DT: QCOM: Add thermal mitigation " Ilia Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1513081897-31612-6-git-send-email-ilialin@codeaurora.org \
    --to=ilialin-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=celster-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=qualcomm-lt-cunTk1MwBs8s++Sfvej+rw@public.gmane.org \
    --cc=rnayak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=tfinkel-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).