From: Ilia Lin <ilialin@codeaurora.org>
To: mturquette@baylibre.com, sboyd@kernel.org, robh@kernel.org,
mark.rutland@arm.com, viresh.kumar@linaro.org, nm@ti.com,
lgirdwood@gmail.com, broonie@kernel.org, andy.gross@linaro.org,
david.brown@linaro.org, catalin.marinas@arm.com,
will.deacon@arm.com, rjw@rjwysocki.net,
linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
rnayak@codeaurora.org, ilialin@codeaurora.org,
amit.kucheria@linaro.org, nicolas.dechesne@linaro.org,
celster@codeaurora.org, tfinkel@codeaurora.org
Subject: [PATCH v8 15/15] dt: qcom: Add SAW regulator for 8x96 CPUs
Date: Thu, 17 May 2018 14:19:15 +0300 [thread overview]
Message-ID: <1526555955-29960-16-git-send-email-ilialin@codeaurora.org> (raw)
In-Reply-To: <1526555955-29960-1-git-send-email-ilialin@codeaurora.org>
1. Add syscon node for the SAW CPU registers
2. Add SAW regulators gang definition for s8-s11
3. Add voltages to the OPP tables
4. Add the s11 SAW regulator as CPU regulator
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 119 ++++++++++++++++++++++++++++++++++
1 file changed, 119 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index d96a112..871bfac 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/spmi/spmi.h>
/ {
model = "Qualcomm Technologies, Inc. MSM8996";
@@ -92,6 +93,7 @@
reg = <0x0 0x0>;
enable-method = "psci";
clocks = <&kryocc 0>;
+ cpu-supply = <&pm8994_s11_saw>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
@@ -107,6 +109,7 @@
reg = <0x0 0x1>;
enable-method = "psci";
clocks = <&kryocc 0>;
+ cpu-supply = <&pm8994_s11_saw>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
@@ -118,6 +121,7 @@
reg = <0x0 0x100>;
enable-method = "psci";
clocks = <&kryocc 1>;
+ cpu-supply = <&pm8994_s11_saw>;
operating-points-v2 = <&cluster1_opp>;
#cooling-cells = <2>;
next-level-cache = <&L2_1>;
@@ -133,6 +137,7 @@
reg = <0x0 0x101>;
enable-method = "psci";
clocks = <&kryocc 1>;
+ cpu-supply = <&pm8994_s11_saw>;
operating-points-v2 = <&cluster1_opp>;
#cooling-cells = <2>;
next-level-cache = <&L2_1>;
@@ -169,171 +174,205 @@
opp-307200000 {
opp-hz = /bits/ 64 <307200000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x77>;
clock-latency-ns = <200000>;
};
opp-384000000 {
opp-hz = /bits/ 64 <384000000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-422400000 {
opp-hz = /bits/ 64 <422400000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-460800000 {
opp-hz = /bits/ 64 <460800000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-537600000 {
opp-hz = /bits/ 64 <537600000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-556800000 {
opp-hz = /bits/ 64 <556800000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-614400000 {
opp-hz = /bits/ 64 <614400000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-691200000 {
opp-hz = /bits/ 64 <691200000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-729600000 {
opp-hz = /bits/ 64 <729600000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-768000000 {
opp-hz = /bits/ 64 <768000000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-844800000 {
opp-hz = /bits/ 64 <844800000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x77>;
clock-latency-ns = <200000>;
};
opp-902400000 {
opp-hz = /bits/ 64 <902400000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-960000000 {
opp-hz = /bits/ 64 <960000000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-979200000 {
opp-hz = /bits/ 64 <979200000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1036800000 {
opp-hz = /bits/ 64 <1036800000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1056000000 {
opp-hz = /bits/ 64 <1056000000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1113600000 {
opp-hz = /bits/ 64 <1113600000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1132800000 {
opp-hz = /bits/ 64 <1132800000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1190400000 {
opp-hz = /bits/ 64 <1190400000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1209600000 {
opp-hz = /bits/ 64 <1209600000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1228800000 {
opp-hz = /bits/ 64 <1228800000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1286400000 {
opp-hz = /bits/ 64 <1286400000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x5>;
clock-latency-ns = <200000>;
};
opp-1363200000 {
opp-hz = /bits/ 64 <1363200000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x72>;
clock-latency-ns = <200000>;
};
opp-1401600000 {
opp-hz = /bits/ 64 <1401600000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x5>;
clock-latency-ns = <200000>;
};
opp-1440000000 {
opp-hz = /bits/ 64 <1440000000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1478400000 {
opp-hz = /bits/ 64 <1478400000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
opp-1497600000 {
opp-hz = /bits/ 64 <1497600000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x4>;
clock-latency-ns = <200000>;
};
opp-1516800000 {
opp-hz = /bits/ 64 <1516800000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1593600000 {
opp-hz = /bits/ 64 <1593600000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x71>;
clock-latency-ns = <200000>;
};
opp-1996800000 {
opp-hz = /bits/ 64 <1996800000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x20>;
clock-latency-ns = <200000>;
};
opp-2188800000 {
opp-hz = /bits/ 64 <2188800000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x10>;
clock-latency-ns = <200000>;
};
@@ -346,251 +385,301 @@
opp-307200000 {
opp-hz = /bits/ 64 <307200000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x77>;
clock-latency-ns = <200000>;
};
opp-384000000 {
opp-hz = /bits/ 64 <384000000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-403200000 {
opp-hz = /bits/ 64 <403200000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-460800000 {
opp-hz = /bits/ 64 <460800000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-537600000 {
opp-hz = /bits/ 64 <537600000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-556800000 {
opp-hz = /bits/ 64 <556800000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-614400000 {
opp-hz = /bits/ 64 <614400000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-691200000 {
opp-hz = /bits/ 64 <691200000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-729600000 {
opp-hz = /bits/ 64 <729600000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-748800000 {
opp-hz = /bits/ 64 <748800000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-806400000 {
opp-hz = /bits/ 64 <806400000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-825600000 {
opp-hz = /bits/ 64 <825600000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-883200000 {
opp-hz = /bits/ 64 <883200000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-902400000 {
opp-hz = /bits/ 64 <902400000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-940800000 {
opp-hz = /bits/ 64 <940800000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-979200000 {
opp-hz = /bits/ 64 <979200000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1036800000 {
opp-hz = /bits/ 64 <1036800000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1056000000 {
opp-hz = /bits/ 64 <1056000000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1113600000 {
opp-hz = /bits/ 64 <1113600000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1132800000 {
opp-hz = /bits/ 64 <1132800000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1190400000 {
opp-hz = /bits/ 64 <1190400000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1209600000 {
opp-hz = /bits/ 64 <1209600000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1248000000 {
opp-hz = /bits/ 64 <1248000000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1286400000 {
opp-hz = /bits/ 64 <1286400000>;
+ opp-microvolt = <905000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1363200000 {
opp-hz = /bits/ 64 <1363200000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1401600000 {
opp-hz = /bits/ 64 <1401600000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1440000000 {
opp-hz = /bits/ 64 <1440000000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1478400000 {
opp-hz = /bits/ 64 <1478400000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1516800000 {
opp-hz = /bits/ 64 <1516800000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1555200000 {
opp-hz = /bits/ 64 <1555200000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1593600000 {
opp-hz = /bits/ 64 <1593600000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1632000000 {
opp-hz = /bits/ 64 <1632000000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1670400000 {
opp-hz = /bits/ 64 <1670400000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1708800000 {
opp-hz = /bits/ 64 <1708800000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1747200000 {
opp-hz = /bits/ 64 <1747200000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1785600000 {
opp-hz = /bits/ 64 <1785600000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1804800000 {
opp-hz = /bits/ 64 <1804800000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x6>;
clock-latency-ns = <200000>;
};
opp-1824000000 {
opp-hz = /bits/ 64 <1824000000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x71>;
clock-latency-ns = <200000>;
};
opp-1900800000 {
opp-hz = /bits/ 64 <1900800000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x74>;
clock-latency-ns = <200000>;
};
opp-1920000000 {
opp-hz = /bits/ 64 <1920000000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
opp-1977600000 {
opp-hz = /bits/ 64 <1977600000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x30>;
clock-latency-ns = <200000>;
};
opp-1996800000 {
opp-hz = /bits/ 64 <1996800000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
opp-2054400000 {
opp-hz = /bits/ 64 <2054400000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x30>;
clock-latency-ns = <200000>;
};
opp-2073600000 {
opp-hz = /bits/ 64 <2073600000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
opp-2150400000 {
opp-hz = /bits/ 64 <2150400000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x31>;
clock-latency-ns = <200000>;
};
opp-2246400000 {
opp-hz = /bits/ 64 <2246400000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x10>;
clock-latency-ns = <200000>;
};
opp-2342400000 {
opp-hz = /bits/ 64 <2342400000>;
+ opp-microvolt = <1140000 905000 1140000>;
opp-supported-hw = <0x10>;
clock-latency-ns = <200000>;
};
@@ -908,6 +997,11 @@
#mbox-cells = <1>;
};
+ saw3: syscon@9A10000 {
+ compatible = "syscon";
+ reg = <0x9A10000 0x1000>;
+ };
+
gcc: clock-controller@300000 {
compatible = "qcom,gcc-msm8996";
#clock-cells = <1>;
@@ -1134,6 +1228,31 @@
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
+ pmic@1 {
+ compatible = "qcom,pm8994", "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spm-regulators {
+ compatible = "qcom,pm8994-regulators";
+ qcom,saw-reg = <&saw3>;
+ s8 {
+ qcom,saw-slave;
+ };
+ s9 {
+ qcom,saw-slave;
+ };
+ s10 {
+ qcom,saw-slave;
+ };
+ pm8994_s11_saw: s11 {
+ qcom,saw-leader;
+ regulator-always-on;
+ regulator-min-microvolt = <905000>;
+ regulator-max-microvolt = <1140000>;
+ };
+ };
+ };
};
mmcc: clock-controller@8c0000 {
--
1.9.1
prev parent reply other threads:[~2018-05-17 11:19 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-17 11:19 [PATCH v8 00/15] CPU scaling support for msm8996 Ilia Lin
2018-05-17 11:19 ` [PATCH v8 01/15] soc: qcom: Separate kryo l2 accessors from PMU driver Ilia Lin
2018-05-17 11:19 ` [PATCH v8 02/15] clk: qcom: Make clk_alpha_pll_configure available to modules Ilia Lin
2018-05-17 11:19 ` [PATCH v8 03/15] clk: Use devm_ in the register fixed factor clock Ilia Lin
2018-05-17 11:19 ` [PATCH v8 04/15] clk: qcom: Add CPU clock driver for msm8996 Ilia Lin
2018-05-22 13:49 ` kbuild test robot
2018-05-17 11:19 ` [PATCH v8 05/15] dt-bindings: clk: qcom: Add bindings for CPU clock " Ilia Lin
2018-05-17 11:19 ` [PATCH v8 06/15] clk: qcom: cpu-8996: Add support to switch to alternate PLL Ilia Lin
2018-05-17 11:19 ` [PATCH v8 07/15] clk: qcom: cpu-8996: Add support to switch below 600Mhz Ilia Lin
2018-05-17 11:19 ` [PATCH v8 08/15] clk: qcom: Add ACD path to CPU clock driver for msm8996 Ilia Lin
2018-05-17 11:19 ` [PATCH v8 09/15] dt: qcom: Add opp and thermal to the msm8996 Ilia Lin
2018-05-17 11:19 ` [PATCH v8 10/15] cpufreq: Add Kryo CPU scaling driver Ilia Lin
2018-05-18 1:45 ` Viresh Kumar
2018-05-19 11:09 ` ilialin
2018-05-19 11:54 ` Russell King - ARM Linux
2018-05-19 11:41 ` ilialin
2018-05-19 11:45 ` ilialin
2018-05-21 4:49 ` Viresh Kumar
2018-05-21 9:00 ` ilialin
2018-05-21 9:05 ` Viresh Kumar
2018-05-19 11:35 ` [PATCH] " Ilia Lin
2018-05-21 5:04 ` Viresh Kumar
2018-05-21 12:50 ` Sudeep Holla
2018-05-21 12:57 ` ilialin
2018-05-21 13:04 ` Sudeep Holla
2018-05-22 6:56 ` ilialin
2018-05-22 9:12 ` Sudeep Holla
2018-05-22 7:59 ` ilialin
2018-05-22 9:18 ` Sudeep Holla
2018-05-22 9:38 ` Viresh Kumar
2018-05-22 11:29 ` Ilia Lin
2018-05-22 13:07 ` Sudeep Holla
2018-05-23 5:44 ` Viresh Kumar
2018-05-23 9:05 ` Ilia Lin
2018-05-23 9:32 ` Viresh Kumar
2018-05-23 9:40 ` Russell King - ARM Linux
2018-05-23 9:59 ` Viresh Kumar
2018-05-21 10:31 ` Ilia Lin
2018-05-21 10:37 ` Viresh Kumar
2018-05-21 10:54 ` Russell King - ARM Linux
2018-05-21 11:05 ` ilialin
2018-05-21 12:11 ` Russell King - ARM Linux
2018-05-21 12:35 ` ilialin
2018-05-21 12:41 ` Russell King - ARM Linux
2018-05-17 11:19 ` [PATCH v8 11/15] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu Ilia Lin
2018-05-18 14:26 ` Rob Herring
2018-05-17 11:19 ` [PATCH v8 12/15] dt: qcom: Add qcom-cpufreq-kryo driver configuration Ilia Lin
2018-05-17 11:19 ` [PATCH v8 13/15] regulator: qcom_spmi: Add support for SAW Ilia Lin
2018-05-17 11:19 ` [PATCH v8 14/15] dt-bindings: qcom_spmi: Document SAW support Ilia Lin
2018-05-17 11:19 ` Ilia Lin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1526555955-29960-16-git-send-email-ilialin@codeaurora.org \
--to=ilialin@codeaurora.org \
--cc=amit.kucheria@linaro.org \
--cc=andy.gross@linaro.org \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=celster@codeaurora.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=nicolas.dechesne@linaro.org \
--cc=nm@ti.com \
--cc=rjw@rjwysocki.net \
--cc=rnayak@codeaurora.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=tfinkel@codeaurora.org \
--cc=viresh.kumar@linaro.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).