From: Yuti Amonkar <yamonkar@cadence.com>
To: <linux-kernel@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
<devicetree@vger.kernel.org>, <robh+dt@kernel.org>,
<maxime@cerno.tech>, <airlied@linux.ie>, <daniel@ffwll.ch>,
<mark.rutland@arm.com>, <a.hajda@samsung.com>,
<narmstrong@baylibre.com>, <Laurent.pinchart@ideasonboard.com>,
<jonas@kwiboo.se>, <jernej.skrabec@siol.net>
Cc: <praneeth@ti.com>, <jsarha@ti.com>, <tomi.valkeinen@ti.com>,
<mparab@cadence.com>, <sjakhade@cadence.com>,
<yamonkar@cadence.com>
Subject: [PATCH v5 0/3] drm: Add support for Cadence MHDP DPI/DP bridge and J721E wrapper.
Date: Wed, 12 Feb 2020 05:26:41 +0100 [thread overview]
Message-ID: <1581481604-24499-1-git-send-email-yamonkar@cadence.com> (raw)
This patch series adds new DRM driver for Cadence Display Port.
The Cadence Display Port is also referred as MHDP (Mobile High
Definition Link, High-Definition Multimedia Interface Display
Port) Cadence Display Port complies with VESA DisplayPort (DP)
and embedded Display Port (eDP) standards. This driver implements
Single Stream Transport (SST) support. Adds Texas Instruments SoC
J721e specific wrapper and adds the device tree bindings in YAML format.
The patch series has three patches which applies the changes in the below sequence
1. 001-dt-bindings-drm-bridge-Document-Cadence-MHDP-bridge-bindings
Documents the bindings in yaml format.
2. 002-drm-bridge-Add-support-for-Cadence-MHDP-bridge
This patch adds new DRM driver for Cadence MHDP Display Port. The patch implements
supports for single stream transport mode.
3. 003-drm-mhdp-add-j721e-wrapper
Add Texas Instruments (TI) j721e wrapper for mhdp. The wrapper configures mhdp clocks
and muxes as required by SoC.
Version History:
v5:
- Added Signed-off-by: Jyri Sarha <jsarha@ti.com> tag to
the code patches.
v4:
- Added SPDX dual license tag to YAML bindings.
- Corrected indentation of the child node properties.
- Removed the maxItems in the conditional statement.
- Add Reviewed-by: Rob Herring <robh@kernel.org> tag to the
Document Cadence MHDP bridge bindings patch.
- Renamed the DRM driver executable name from mhdp8546 to cdns-mhdp in Makefile.
- Renamed the DRM driver and header file from cdns-mhdp to cdns-mhdp-core.
v3:
- Added if / then clause to validate that the reg length is proper
based on the value of the compatible property.
- Updated phy property description in YAML to a generic one.
- Renamed num_lanes and max_bit_rate property strings to cdns,num-lanes
and cdns,max-bit-rate based on update in PHY series [2].
v2:
- Use enum in compatible property of YAML file.
- Add reg-names property to YAML file
- Add minItems and maxItems to reg property in YAML.
- Remove cdns_mhdp_link_probe function to remove
duplication of reading dpcd capabilities.
This patch series is dependent on PHY DisplayPort configuration patch [1]
[1]
https://lkml.org/lkml/2020/1/6/279
[2]
https://lkml.org/lkml/2020/2/6/15
Yuti Amonkar (3):
dt-bindings: drm/bridge: Document Cadence MHDP bridge bindings.
drm: bridge: Add support for Cadence MHDP DPI/DP bridge
drm: bridge: cdns-mhdp: add j721e wrapper
.../bindings/display/bridge/cdns,mhdp.yaml | 125 +
drivers/gpu/drm/bridge/Kconfig | 23 +
drivers/gpu/drm/bridge/Makefile | 6 +
drivers/gpu/drm/bridge/cdns-mhdp-core.c | 2220 +++++++++++++++++
drivers/gpu/drm/bridge/cdns-mhdp-core.h | 381 +++
drivers/gpu/drm/bridge/cdns-mhdp-j721e.c | 79 +
drivers/gpu/drm/bridge/cdns-mhdp-j721e.h | 55 +
7 files changed, 2889 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml
create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-core.c
create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-core.h
create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-j721e.c
create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-j721e.h
--
2.20.1
next reply other threads:[~2020-02-12 4:27 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-12 4:26 Yuti Amonkar [this message]
2020-02-12 4:26 ` [PATCH v5 1/3] dt-bindings: drm/bridge: Document Cadence MHDP bridge bindings Yuti Amonkar
2020-02-13 9:16 ` Tomi Valkeinen
2020-02-16 15:28 ` Laurent Pinchart
2020-02-16 15:31 ` Laurent Pinchart
2020-02-16 15:33 ` Laurent Pinchart
2020-02-12 4:26 ` [PATCH v5 2/3] drm: bridge: Add support for Cadence MHDP DPI/DP bridge Yuti Amonkar
2020-02-13 9:19 ` Tomi Valkeinen
2020-02-12 4:26 ` [PATCH v5 3/3] drm: bridge: cdns-mhdp: add j721e wrapper Yuti Amonkar
2020-02-13 10:29 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1581481604-24499-1-git-send-email-yamonkar@cadence.com \
--to=yamonkar@cadence.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=jsarha@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maxime@cerno.tech \
--cc=mparab@cadence.com \
--cc=narmstrong@baylibre.com \
--cc=praneeth@ti.com \
--cc=robh+dt@kernel.org \
--cc=sjakhade@cadence.com \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).