From: Joakim Zhang <qiangqing.zhang@nxp.com>
To: mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
mark.rutland@arm.com, shawnguo@kernel.org,
s.hauer@pengutronix.de
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
Anson.Huang@nxp.com, leonard.crestez@nxp.com,
daniel.baluta@nxp.com, aisheng.dong@nxp.com, peng.fan@nxp.com,
fugang.duan@nxp.com, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Joakim Zhang <qiangqing.zhang@nxp.com>
Subject: [PATCH 7/7] arch: arm64: dts: imx8qxp: add device node for CAN in ADMA SS
Date: Mon, 17 Feb 2020 11:19:21 +0800 [thread overview]
Message-ID: <1581909561-12058-8-git-send-email-qiangqing.zhang@nxp.com> (raw)
In-Reply-To: <1581909561-12058-1-git-send-email-qiangqing.zhang@nxp.com>
Add device node for CAN in ADMA SS.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 47 +++++++++++++++
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 59 +++++++++++++++++++
2 files changed, 106 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index f88402ee650c..72a45dd7129e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -28,6 +28,25 @@
gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ reg_can_en: regulator-can-en {
+ compatible = "regulator-fixed";
+ regulator-name = "can-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pca6416 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can_stby: regulator-can-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can-stby";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pca6416 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can_en>;
+ };
};
&cm40_i2c {
@@ -80,6 +99,20 @@
};
};
+&adma_flexcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan0>;
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
+&adma_flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
&adma_i2c1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -207,6 +240,20 @@
>;
};
+ pinctrl_flexcan0: flexcan0grp {
+ fsl,pins = <
+ IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX 0x00000021
+ IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX 0x00000021
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX 0x00000021
+ IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX 0x00000021
+ >;
+ };
+
pinctrl_ioexp_rst: ioexp_rst_grp {
fsl,pins = <
IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index cd10519eced7..f549e33d1c82 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -34,6 +34,9 @@
serial1 = &adma_lpuart1;
serial2 = &adma_lpuart2;
serial3 = &adma_lpuart3;
+ can0 = &adma_flexcan0;
+ can1 = &adma_flexcan1;
+ can2 = &adma_flexcan2;
};
cpus {
@@ -384,6 +387,62 @@
power-domains = <&pd IMX_SC_R_I2C_3>;
status = "disabled";
};
+
+ adma_flexcan0: can@5a8d0000 {
+ compatible = "fsl,imx8qxp-flexcan", "fsl,imx8qm-flexcan";
+ reg = <0x5a8d0000 0x10000>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ clocks = <&adma_lpcg IMX_ADMA_LPCG_CAN0_IPG_CLK>,
+ <&adma_lpcg IMX_ADMA_LPCG_CAN0_IPG_PE_CLK>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&clk IMX_ADMA_CAN0_CLK>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&pd IMX_SC_R_CAN_0>;
+ /* SLSlice[4] */
+ fsl,clk-source = <0>;
+ status = "disabled";
+ };
+
+ adma_flexcan1: can@5a8e0000 {
+ compatible = "fsl,imx8qxp-flexcan", "fsl,imx8qm-flexcan";
+ reg = <0x5a8e0000 0x10000>;
+ interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ /* CAN0 clock and PD is shared among all CAN instances
+ * as CAN1 shares CAN0's clock and to enable CAN0's
+ * clock it has to be powered on.
+ */
+ clocks = <&adma_lpcg IMX_ADMA_LPCG_CAN0_IPG_CLK>,
+ <&adma_lpcg IMX_ADMA_LPCG_CAN0_IPG_PE_CLK>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&clk IMX_ADMA_CAN0_CLK>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&pd IMX_SC_R_CAN_1>;
+ /* SLSlice[4] */
+ fsl,clk-source = <0>;
+ status = "disabled";
+ };
+
+ adma_flexcan2: can@5a8f0000 {
+ compatible = "fsl,imx8qxp-flexcan", "fsl,imx8qm-flexcan";
+ reg = <0x5a8f0000 0x10000>;
+ interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ /* CAN0 clock and PD is shared among all CAN instances
+ * as CAN2 shares CAN0's clock and to enable CAN0's
+ * clock it has to be powered on.
+ */
+ clocks = <&adma_lpcg IMX_ADMA_LPCG_CAN0_IPG_CLK>,
+ <&adma_lpcg IMX_ADMA_LPCG_CAN0_IPG_PE_CLK>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&clk IMX_ADMA_CAN0_CLK>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&pd IMX_SC_R_CAN_2>;
+ /* SLSlice[4] */
+ fsl,clk-source = <0>;
+ status = "disabled";
+ };
};
conn_subsys: bus@5b000000 {
--
2.17.1
prev parent reply other threads:[~2020-02-17 3:26 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-17 3:19 [PATCH 0/7] Add FlexCAN support on i.MX8QXP Joakim Zhang
2020-02-17 3:19 ` [PATCH 1/7] firmware: imx: scu-pd: add power domain for I2C and INTMUX in CM40 SS Joakim Zhang
2020-03-10 3:32 ` Shawn Guo
2020-02-17 3:19 ` [PATCH 2/7] clk: imx8: Add SCU and LPCG clocks for I2C " Joakim Zhang
2020-02-25 17:57 ` Rob Herring
2020-02-26 2:56 ` Joakim Zhang
2020-03-10 3:42 ` Shawn Guo
2020-02-17 3:19 ` [PATCH 3/7] bindings: clock: imx8qxp: add "fsl,imx8qxp-lpcg-cm40" compatible string Joakim Zhang
2020-02-25 17:58 ` Rob Herring
2020-02-17 3:19 ` [PATCH 4/7] clk: imx: imx8qxp: Enable SCU and LPCG clocks for I2C in CM40 SS Joakim Zhang
2020-03-10 3:45 ` Shawn Guo
2020-03-10 6:01 ` Joakim Zhang
2020-02-17 3:19 ` [PATCH 5/7] arch: arm64: dts: imx8qxp: add device node for I2C and INTMUX " Joakim Zhang
2020-03-10 3:49 ` Shawn Guo
2020-02-17 3:19 ` [PATCH 6/7] clk: imx: imx8qxp: add LPCG clock for FlexCAN in ADMA SS Joakim Zhang
2020-02-17 3:19 ` Joakim Zhang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1581909561-12058-8-git-send-email-qiangqing.zhang@nxp.com \
--to=qiangqing.zhang@nxp.com \
--cc=Anson.Huang@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=daniel.baluta@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=fugang.duan@nxp.com \
--cc=kernel@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).