* [PATCH v6 1/3] thermal: mediatek: Add cpu dynamic power cooling model.
2015-12-16 13:29 [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model Dawei Chien
@ 2015-12-16 13:29 ` Dawei Chien
2015-12-16 13:29 ` [PATCH v6 2/3] arm64: dts: mt8173: Add thermal zone node Dawei Chien
` (2 subsequent siblings)
3 siblings, 0 replies; 12+ messages in thread
From: Dawei Chien @ 2015-12-16 13:29 UTC (permalink / raw)
To: Viresh Kumar
Cc: Rafael J. Wysocki, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Matthias Brugger, Daniel Kurtz,
Sascha Hauer, Daniel Lezcano, Dawei Chien, devicetree,
linux-arm-kernel, linux-kernel, linux-pm, linux-mediatek,
srv_heupstream, Sascha Hauer, Punit Agrawal
MT8173 cpufreq driver select of_cpufreq_power_cooling_register registering
cooling devices with dynamic power coefficient.
Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
---
This patch is base on patchset:
https://lkml.org/lkml/2015/11/17/251
---
drivers/cpufreq/mt8173-cpufreq.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/cpufreq/mt8173-cpufreq.c b/drivers/cpufreq/mt8173-cpufreq.c
index 83001dc..d00bab5 100644
--- a/drivers/cpufreq/mt8173-cpufreq.c
+++ b/drivers/cpufreq/mt8173-cpufreq.c
@@ -263,17 +263,24 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
return 0;
}
+#define DYNAMIC_POWER "dynamic-power-coefficient"
+
static void mtk_cpufreq_ready(struct cpufreq_policy *policy)
{
struct mtk_cpu_dvfs_info *info = policy->driver_data;
struct device_node *np = of_node_get(info->cpu_dev->of_node);
+ u32 capacitance = 0;
if (WARN_ON(!np))
return;
if (of_find_property(np, "#cooling-cells", NULL)) {
- info->cdev = of_cpufreq_cooling_register(np,
- policy->related_cpus);
+ of_property_read_u32(np, DYNAMIC_POWER, &capacitance);
+
+ info->cdev = of_cpufreq_power_cooling_register(np,
+ policy->related_cpus,
+ capacitance,
+ NULL);
if (IS_ERR(info->cdev)) {
dev_err(info->cpu_dev,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 2/3] arm64: dts: mt8173: Add thermal zone node.
2015-12-16 13:29 [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model Dawei Chien
2015-12-16 13:29 ` [PATCH v6 1/3] " Dawei Chien
@ 2015-12-16 13:29 ` Dawei Chien
2015-12-16 13:29 ` [PATCH v6 3/3] arm64: dts: mt8173: Add dynamic power node Dawei Chien
2015-12-17 1:52 ` [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model Viresh Kumar
3 siblings, 0 replies; 12+ messages in thread
From: Dawei Chien @ 2015-12-16 13:29 UTC (permalink / raw)
To: Viresh Kumar
Cc: Rafael J. Wysocki, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Matthias Brugger, Daniel Kurtz,
Sascha Hauer, Daniel Lezcano, Dawei Chien, devicetree,
linux-arm-kernel, linux-kernel, linux-pm, linux-mediatek,
srv_heupstream, Sascha Hauer, Punit Agrawal
This adds thermal zone node to Mediatek MT8173 dtsi file.
Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
---
This patch is base on patchset:
https://lkml.org/lkml/2015/11/30/239
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 43 ++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index fda805d..c962d94 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -188,6 +188,49 @@
clock-output-names = "cpum_ck";
};
+ thermal-zones {
+ cpu_thermal: cpu_thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+
+ thermal-sensors = <&thermal>;
+ sustainable-power = <1500>; /* milliwatts */
+
+ trips {
+ threshold: trip-point@0 {
+ temperature = <68000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ target: trip-point@1 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit@0 {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map@0 {
+ trip = <&target>;
+ cooling-device = <&cpu0 0 0>;
+ contribution = <1024>;
+ };
+ map@1 {
+ trip = <&target>;
+ cooling-device = <&cpu2 0 0>;
+ contribution = <2048>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 3/3] arm64: dts: mt8173: Add dynamic power node.
2015-12-16 13:29 [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model Dawei Chien
2015-12-16 13:29 ` [PATCH v6 1/3] " Dawei Chien
2015-12-16 13:29 ` [PATCH v6 2/3] arm64: dts: mt8173: Add thermal zone node Dawei Chien
@ 2015-12-16 13:29 ` Dawei Chien
2015-12-17 1:52 ` [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model Viresh Kumar
3 siblings, 0 replies; 12+ messages in thread
From: Dawei Chien @ 2015-12-16 13:29 UTC (permalink / raw)
To: Viresh Kumar
Cc: Rafael J. Wysocki, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Matthias Brugger, Daniel Kurtz,
Sascha Hauer, Daniel Lezcano, Dawei Chien, devicetree,
linux-arm-kernel, linux-kernel, linux-pm, linux-mediatek,
srv_heupstream, Sascha Hauer, Punit Agrawal
This device node is for calculating dynamic power in mW.
Since mt8173 has two clusters, there are two dynamic power
coefficient as well.
Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
---
This patch is base on patchset:
https://lkml.org/lkml/2015/11/17/251
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index c962d94..b6f4ea5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -71,6 +71,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <263>;
};
cpu1: cpu@1 {
@@ -95,6 +96,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <263>;
};
cpu2: cpu@100 {
@@ -119,6 +121,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <530>;
};
cpu3: cpu@101 {
@@ -143,6 +146,7 @@
#cooling-cells = <2>;
#cooling-min-level = <0>;
#cooling-max-level = <7>;
+ dynamic-power-coefficient = <530>;
};
idle-states {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model.
2015-12-16 13:29 [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model Dawei Chien
` (2 preceding siblings ...)
2015-12-16 13:29 ` [PATCH v6 3/3] arm64: dts: mt8173: Add dynamic power node Dawei Chien
@ 2015-12-17 1:52 ` Viresh Kumar
2016-03-15 4:53 ` dawei chien
3 siblings, 1 reply; 12+ messages in thread
From: Viresh Kumar @ 2015-12-17 1:52 UTC (permalink / raw)
To: Dawei Chien
Cc: Rafael J. Wysocki, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Matthias Brugger, Daniel Kurtz,
Sascha Hauer, Daniel Lezcano, devicetree, linux-arm-kernel,
linux-kernel, linux-pm, linux-mediatek, srv_heupstream,
Sascha Hauer, Punit Agrawal
On 16-12-15, 21:29, Dawei Chien wrote:
> Use Intelligent Power Allocation (IPA) technical to add dynamic power model
> for binding CPU thermal zone. The power allocator governor allocates power
> budget to control CPU temperature.
>
> Power Allocator governor is able to keep SOC temperature within a defined
> temperature range to avoid SOC overheat and keep it's performance.
> mt8173-cpufreq.c need to register its' own power model with power allocator
> thermal governor, so that power allocator governor can allocates suitable
> power budget to control CPU temperature.
>
> Binding document is refer to this patchset
> https://lkml.org/lkml/2015/11/30/239
>
> Change since V5:
> 1. Remove thermal sensor ID from phandles
Though you should have included this in the new version, but still
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
--
viresh
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model.
2015-12-17 1:52 ` [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model Viresh Kumar
@ 2016-03-15 4:53 ` dawei chien
2016-03-15 6:17 ` Viresh Kumar
0 siblings, 1 reply; 12+ messages in thread
From: dawei chien @ 2016-03-15 4:53 UTC (permalink / raw)
To: Viresh Kumar
Cc: Rafael J. Wysocki, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Matthias Brugger, Daniel Kurtz,
Sascha Hauer, Daniel Lezcano, devicetree, linux-arm-kernel,
linux-kernel, linux-pm, linux-mediatek, srv_heupstream,
Sascha Hauer, Punit Agrawal
On Thu, 2015-12-17 at 09:52 +0800, Viresh Kumar wrote:
> On 16-12-15, 21:29, Dawei Chien wrote:
> > Use Intelligent Power Allocation (IPA) technical to add dynamic power model
> > for binding CPU thermal zone. The power allocator governor allocates power
> > budget to control CPU temperature.
> >
> > Power Allocator governor is able to keep SOC temperature within a defined
> > temperature range to avoid SOC overheat and keep it's performance.
> > mt8173-cpufreq.c need to register its' own power model with power allocator
> > thermal governor, so that power allocator governor can allocates suitable
> > power budget to control CPU temperature.
> >
> > Binding document is refer to this patchset
> > https://lkml.org/lkml/2015/11/30/239
> >
> > Change since V5:
> > 1. Remove thermal sensor ID from phandles
>
> Though you should have included this in the new version, but still
>
> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
>
> --
> viresh
Hi Viresh,
Would you please pull this patch to your tree since following patch
already pulled in, thank you.
https://lkml.org/lkml/2015/11/30/239
BR,
Dawei
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model.
2016-03-15 4:53 ` dawei chien
@ 2016-03-15 6:17 ` Viresh Kumar
2016-03-22 5:13 ` dawei chien
0 siblings, 1 reply; 12+ messages in thread
From: Viresh Kumar @ 2016-03-15 6:17 UTC (permalink / raw)
To: dawei chien
Cc: Rafael J. Wysocki, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Matthias Brugger, Daniel Kurtz,
Sascha Hauer, Daniel Lezcano, devicetree, linux-arm-kernel,
linux-kernel, linux-pm, linux-mediatek, srv_heupstream,
Sascha Hauer, Punit Agrawal
On 15-03-16, 12:53, dawei chien wrote:
> On Thu, 2015-12-17 at 09:52 +0800, Viresh Kumar wrote:
> > On 16-12-15, 21:29, Dawei Chien wrote:
> > > Use Intelligent Power Allocation (IPA) technical to add dynamic power model
> > > for binding CPU thermal zone. The power allocator governor allocates power
> > > budget to control CPU temperature.
> > >
> > > Power Allocator governor is able to keep SOC temperature within a defined
> > > temperature range to avoid SOC overheat and keep it's performance.
> > > mt8173-cpufreq.c need to register its' own power model with power allocator
> > > thermal governor, so that power allocator governor can allocates suitable
> > > power budget to control CPU temperature.
> > >
> > > Binding document is refer to this patchset
> > > https://lkml.org/lkml/2015/11/30/239
> > >
> > > Change since V5:
> > > 1. Remove thermal sensor ID from phandles
> >
> > Though you should have included this in the new version, but still
> >
> > Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
> >
> > --
> > viresh
>
> Hi Viresh,
> Would you please pull this patch to your tree since following patch
> already pulled in, thank you.
>
> https://lkml.org/lkml/2015/11/30/239
Its Rafael, who is going to apply this one.
Can you please resend it as he may not have it in patchworks?
--
viresh
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model.
2016-03-15 6:17 ` Viresh Kumar
@ 2016-03-22 5:13 ` dawei chien
2016-04-12 2:32 ` dawei chien
0 siblings, 1 reply; 12+ messages in thread
From: dawei chien @ 2016-03-22 5:13 UTC (permalink / raw)
To: Viresh Kumar, Rafael J. Wysocki
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Matthias Brugger, Daniel Kurtz, Sascha Hauer, Daniel Lezcano,
devicetree, linux-arm-kernel, linux-kernel, linux-pm,
linux-mediatek, srv_heupstream, Sascha Hauer, Punit Agrawal
On Tue, 2016-03-15 at 13:17 +0700, Viresh Kumar wrote:
> On 15-03-16, 12:53, dawei chien wrote:
> > On Thu, 2015-12-17 at 09:52 +0800, Viresh Kumar wrote:
> > > On 16-12-15, 21:29, Dawei Chien wrote:
> > > > Use Intelligent Power Allocation (IPA) technical to add dynamic power model
> > > > for binding CPU thermal zone. The power allocator governor allocates power
> > > > budget to control CPU temperature.
> > > >
> > > > Power Allocator governor is able to keep SOC temperature within a defined
> > > > temperature range to avoid SOC overheat and keep it's performance.
> > > > mt8173-cpufreq.c need to register its' own power model with power allocator
> > > > thermal governor, so that power allocator governor can allocates suitable
> > > > power budget to control CPU temperature.
> > > >
> > > > Binding document is refer to this patchset
> > > > https://lkml.org/lkml/2015/11/30/239
> > > >
> > > > Change since V5:
> > > > 1. Remove thermal sensor ID from phandles
> > >
> > > Though you should have included this in the new version, but still
> > >
> > > Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
> > >
> > > --
> > > viresh
> >
> > Hi Viresh,
> > Would you please pull this patch to your tree since following patch
> > already pulled in, thank you.
> >
> > https://lkml.org/lkml/2015/11/30/239
>
> Its Rafael, who is going to apply this one.
>
> Can you please resend it as he may not have it in patchworks?
>
Hi Rafael,
Would you merge this patch to your tee, thank you.
BR,
Dawei
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model.
2016-03-22 5:13 ` dawei chien
@ 2016-04-12 2:32 ` dawei chien
2016-04-12 5:11 ` Viresh Kumar
0 siblings, 1 reply; 12+ messages in thread
From: dawei chien @ 2016-04-12 2:32 UTC (permalink / raw)
To: Viresh Kumar
Cc: Rafael J. Wysocki, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Matthias Brugger, Daniel Kurtz,
Sascha Hauer, Daniel Lezcano, devicetree, linux-arm-kernel,
linux-kernel, linux-pm, linux-mediatek, srv_heupstream,
Sascha Hauer, Punit Agrawal
On Tue, 2016-03-22 at 13:13 +0800, dawei chien wrote:
> On Tue, 2016-03-15 at 13:17 +0700, Viresh Kumar wrote:
> > On 15-03-16, 12:53, dawei chien wrote:
> > > On Thu, 2015-12-17 at 09:52 +0800, Viresh Kumar wrote:
> > > > On 16-12-15, 21:29, Dawei Chien wrote:
> > > > > Use Intelligent Power Allocation (IPA) technical to add dynamic power model
> > > > > for binding CPU thermal zone. The power allocator governor allocates power
> > > > > budget to control CPU temperature.
> > > > >
> > > > > Power Allocator governor is able to keep SOC temperature within a defined
> > > > > temperature range to avoid SOC overheat and keep it's performance.
> > > > > mt8173-cpufreq.c need to register its' own power model with power allocator
> > > > > thermal governor, so that power allocator governor can allocates suitable
> > > > > power budget to control CPU temperature.
> > > > >
> > > > > Binding document is refer to this patchset
> > > > > https://lkml.org/lkml/2015/11/30/239
> > > > >
> > > > > Change since V5:
> > > > > 1. Remove thermal sensor ID from phandles
> > > >
> > > > Though you should have included this in the new version, but still
> > > >
> > > > Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
> > > >
> > > > --
> > > > viresh
> > >
> > > Hi Viresh,
> > > Would you please pull this patch to your tree since following patch
> > > already pulled in, thank you.
> > >
> > > https://lkml.org/lkml/2015/11/30/239
> >
> > Its Rafael, who is going to apply this one.
> >
> > Can you please resend it as he may not have it in patchworks?
> >
>
> Hi Rafael,
> Would you merge this patch to your tree, thank you.
>
> BR,
> Dawei
Hi Rafael,
Would you please merge this patch, or please kindly let me know for any
problem, thank you.
BR,
Dawei
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model.
2016-04-12 2:32 ` dawei chien
@ 2016-04-12 5:11 ` Viresh Kumar
2016-04-12 5:24 ` dawei chien
0 siblings, 1 reply; 12+ messages in thread
From: Viresh Kumar @ 2016-04-12 5:11 UTC (permalink / raw)
To: dawei chien
Cc: Rafael J. Wysocki, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Matthias Brugger, Daniel Kurtz,
Sascha Hauer, Daniel Lezcano, devicetree, linux-arm-kernel,
linux-kernel, linux-pm, linux-mediatek, srv_heupstream,
Sascha Hauer, Punit Agrawal
On 12-04-16, 10:32, dawei chien wrote:
> On Tue, 2016-03-22 at 13:13 +0800, dawei chien wrote:
> > On Tue, 2016-03-15 at 13:17 +0700, Viresh Kumar wrote:
> > > Its Rafael, who is going to apply this one.
> > >
> > > Can you please resend it as he may not have it in patchworks?
> > >
> >
> > Hi Rafael,
> > Would you merge this patch to your tree, thank you.
> >
> > BR,
> > Dawei
>
> Hi Rafael,
> Would you please merge this patch, or please kindly let me know for any
> problem, thank you.
Didn't I ask you earlier to resend this patch as Rafael wouldn't have
it in his queue now ?
Please resend it and that will make it earlier for Rafael to get it
applied.
--
viresh
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model.
2016-04-12 5:11 ` Viresh Kumar
@ 2016-04-12 5:24 ` dawei chien
2016-04-12 5:39 ` Viresh Kumar
0 siblings, 1 reply; 12+ messages in thread
From: dawei chien @ 2016-04-12 5:24 UTC (permalink / raw)
To: Viresh Kumar
Cc: Rafael J. Wysocki, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Matthias Brugger, Daniel Kurtz,
Sascha Hauer, Daniel Lezcano, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-pm-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, srv_heupstream,
Sascha Hauer, Punit Agrawal
On Tue, 2016-04-12 at 10:41 +0530, Viresh Kumar wrote:
> On 12-04-16, 10:32, dawei chien wrote:
> > On Tue, 2016-03-22 at 13:13 +0800, dawei chien wrote:
> > > On Tue, 2016-03-15 at 13:17 +0700, Viresh Kumar wrote:
> > > > Its Rafael, who is going to apply this one.
> > > >
> > > > Can you please resend it as he may not have it in patchworks?
> > > >
> > >
> > > Hi Rafael,
> > > Would you merge this patch to your tree, thank you.
> > >
> > > BR,
> > > Dawei
> >
> > Hi Rafael,
> > Would you please merge this patch, or please kindly let me know for any
> > problem, thank you.
>
> Didn't I ask you earlier to resend this patch as Rafael wouldn't have
> it in his queue now ?
>
> Please resend it and that will make it earlier for Rafael to get it
> applied.
>
Hi Viresh,
Please refer to following for my resending, thank you.
https://lkml.org/lkml/2016/3/15/101
https://patchwork.kernel.org/patch/8586131/
https://patchwork.kernel.org/patch/8586111/
https://patchwork.kernel.org/patch/8586081/
BR,
Dawei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v6 0/3] thermal: mediatek: Add cpu dynamic power cooling model.
2016-04-12 5:24 ` dawei chien
@ 2016-04-12 5:39 ` Viresh Kumar
0 siblings, 0 replies; 12+ messages in thread
From: Viresh Kumar @ 2016-04-12 5:39 UTC (permalink / raw)
To: dawei chien
Cc: Rafael J. Wysocki, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, Matthias Brugger, Daniel Kurtz,
Sascha Hauer, Daniel Lezcano, devicetree, linux-arm-kernel,
linux-kernel, linux-pm, linux-mediatek, srv_heupstream,
Sascha Hauer, Punit Agrawal
On 12-04-16, 13:24, dawei chien wrote:
> Please refer to following for my resending, thank you.
>
> https://lkml.org/lkml/2016/3/15/101
> https://patchwork.kernel.org/patch/8586131/
> https://patchwork.kernel.org/patch/8586111/
> https://patchwork.kernel.org/patch/8586081/
Oh, you were continuously sending new ping requests on the old thread.
You should have used the new thread instead :)
Anyway, I have pinged Rafael over the new thread now.
--
viresh
^ permalink raw reply [flat|nested] 12+ messages in thread