* [PATCH 02/20] dt-bindings: gpio: Add ASPEED constants
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
@ 2017-12-11 5:06 ` Joel Stanley
[not found] ` <20171211050704.20621-3-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2017-12-11 5:06 ` [PATCH 03/20] ARM: dts: aspeed-g4: Correct VUART IRQ number Joel Stanley
` (15 subsequent siblings)
16 siblings, 1 reply; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
These are used to by the device tree to map pin numbers to constants
required by the GPIO bindings.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 1 +
arch/arm/boot/dts/aspeed-g5.dtsi | 1 +
include/dt-bindings/gpio/aspeed-gpio.h | 49 ++++++++++++++++++++++++++++++++++
3 files changed, 51 insertions(+)
create mode 100644 include/dt-bindings/gpio/aspeed-gpio.h
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 45d815a86d42..100d092e6c07 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
model = "Aspeed BMC";
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 5c4ecdba3a6b..1f9d28313f82 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
model = "Aspeed BMC";
diff --git a/include/dt-bindings/gpio/aspeed-gpio.h b/include/dt-bindings/gpio/aspeed-gpio.h
new file mode 100644
index 000000000000..56fc4889b2c4
--- /dev/null
+++ b/include/dt-bindings/gpio/aspeed-gpio.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * This header provides constants for binding aspeed,*-gpio.
+ *
+ * The first cell in Aspeed's GPIO specifier is the GPIO ID. The macros below
+ * provide names for this.
+ *
+ * The second cell contains standard flag values specified in gpio.h.
+ */
+
+#ifndef _DT_BINDINGS_GPIO_ASPEED_GPIO_H
+#define _DT_BINDINGS_GPIO_ASPEED_GPIO_H
+
+#include <dt-bindings/gpio/gpio.h>
+
+#define ASPEED_GPIO_PORT_A 0
+#define ASPEED_GPIO_PORT_B 1
+#define ASPEED_GPIO_PORT_C 2
+#define ASPEED_GPIO_PORT_D 3
+#define ASPEED_GPIO_PORT_E 4
+#define ASPEED_GPIO_PORT_F 5
+#define ASPEED_GPIO_PORT_G 6
+#define ASPEED_GPIO_PORT_H 7
+#define ASPEED_GPIO_PORT_I 8
+#define ASPEED_GPIO_PORT_J 9
+#define ASPEED_GPIO_PORT_K 10
+#define ASPEED_GPIO_PORT_L 11
+#define ASPEED_GPIO_PORT_M 12
+#define ASPEED_GPIO_PORT_N 13
+#define ASPEED_GPIO_PORT_O 14
+#define ASPEED_GPIO_PORT_P 15
+#define ASPEED_GPIO_PORT_Q 16
+#define ASPEED_GPIO_PORT_R 17
+#define ASPEED_GPIO_PORT_S 18
+#define ASPEED_GPIO_PORT_T 19
+#define ASPEED_GPIO_PORT_U 20
+#define ASPEED_GPIO_PORT_V 21
+#define ASPEED_GPIO_PORT_W 22
+#define ASPEED_GPIO_PORT_X 23
+#define ASPEED_GPIO_PORT_Y 24
+#define ASPEED_GPIO_PORT_Z 25
+#define ASPEED_GPIO_PORT_AA 26
+#define ASPEED_GPIO_PORT_AB 27
+#define ASPEED_GPIO_PORT_AC 28
+
+#define ASPEED_GPIO(port, offset) \
+ ((ASPEED_GPIO_PORT_##port * 8) + offset)
+
+#endif
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 03/20] ARM: dts: aspeed-g4: Correct VUART IRQ number
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
2017-12-11 5:06 ` [PATCH 02/20] dt-bindings: gpio: Add ASPEED constants Joel Stanley
@ 2017-12-11 5:06 ` Joel Stanley
[not found] ` <20171211050704.20621-4-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2017-12-11 5:06 ` [PATCH 04/20] ARM: dts: aspeed: Add LPC and child devices Joel Stanley
` (14 subsequent siblings)
16 siblings, 1 reply; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
This should have always been 8.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 100d092e6c07..9ebf90f34709 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -220,7 +220,7 @@
compatible = "aspeed,ast2400-vuart";
reg = <0x1e787000 0x40>;
reg-shift = <2>;
- interrupts = <10>;
+ interrupts = <8>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 04/20] ARM: dts: aspeed: Add LPC and child devices
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
2017-12-11 5:06 ` [PATCH 02/20] dt-bindings: gpio: Add ASPEED constants Joel Stanley
2017-12-11 5:06 ` [PATCH 03/20] ARM: dts: aspeed-g4: Correct VUART IRQ number Joel Stanley
@ 2017-12-11 5:06 ` Joel Stanley
2017-12-11 5:06 ` [PATCH 05/20] ARM: dts: aspeed: Add proper clock references Joel Stanley
` (13 subsequent siblings)
16 siblings, 0 replies; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
From: Andrew Jeffery <andrew@aj.id.au>
Ensure the ordering is correct and add all of the children in the SoC
device trees for the ast2400 and ast2500.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 35 +++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 27 +++++++++++++++++----------
2 files changed, 52 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 9ebf90f34709..b6d01523555a 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -226,6 +226,41 @@
status = "disabled";
};
+ lpc: lpc@1e789000 {
+ compatible = "aspeed,ast2400-lpc", "simple-mfd";
+ reg = <0x1e789000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e789000 0x1000>;
+
+ lpc_bmc: lpc-bmc@0 {
+ compatible = "aspeed,ast2400-lpc-bmc";
+ reg = <0x0 0x80>;
+ };
+
+ lpc_host: lpc-host@80 {
+ compatible = "aspeed,ast2400-lpc-host", "simple-mfd", "syscon";
+ reg = <0x80 0x1e0>;
+ reg-io-width = <4>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80 0x1e0>;
+
+ lpc_ctrl: lpc-ctrl@0 {
+ compatible = "aspeed,ast2400-lpc-ctrl";
+ reg = <0x0 0x80>;
+ status = "disabled";
+ };
+
+ lhc: lhc@20 {
+ compatible = "aspeed,ast2500-lhc";
+ reg = <0x20 0x24 0x48 0x8>;
+ };
+ };
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 1f9d28313f82..7861631940fe 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -266,6 +266,16 @@
status = "disabled";
};
+ vuart: serial@1e787000 {
+ compatible = "aspeed,ast2500-vuart";
+ reg = <0x1e787000 0x40>;
+ reg-shift = <2>;
+ interrupts = <10>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
lpc: lpc@1e789000 {
compatible = "aspeed,ast2500-lpc", "simple-mfd";
reg = <0x1e789000 0x1000>;
@@ -289,6 +299,13 @@
reg-io-width = <4>;
+ lpc_ctrl: lpc-ctrl@0 {
+ compatible = "aspeed,ast2500-lpc-ctrl";
+ reg = <0x0 0x80>;
+ status = "disabled";
+ };
+
+
lhc: lhc@20 {
compatible = "aspeed,ast2500-lhc";
reg = <0x20 0x24 0x48 0x8>;
@@ -296,16 +313,6 @@
};
};
- vuart: serial@1e787000 {
- compatible = "aspeed,ast2500-vuart";
- reg = <0x1e787000 0x40>;
- reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
-
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 05/20] ARM: dts: aspeed: Add proper clock references
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
` (2 preceding siblings ...)
2017-12-11 5:06 ` [PATCH 04/20] ARM: dts: aspeed: Add LPC and child devices Joel Stanley
@ 2017-12-11 5:06 ` Joel Stanley
[not found] ` <20171211050704.20621-6-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2017-12-11 5:06 ` [PATCH 07/20] ARM: dts: aspeed: Add watchdog clocks Joel Stanley
` (12 subsequent siblings)
16 siblings, 1 reply; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
The existing device trees use fixed-clocks in order to boot without a
clk driver. The newly added clk driver provides proper clock support,
including gating, so we move the device trees over to properly request
clocks.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 100 +++++++++++++++----------------------
arch/arm/boot/dts/aspeed-g5.dtsi | 104 +++++++++++++++------------------------
2 files changed, 81 insertions(+), 123 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b6d01523555a..c87883a7f250 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
+#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
@@ -107,47 +108,12 @@
ranges;
syscon: syscon@1e6e2000 {
- compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
+ compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
#address-cells = <1>;
#size-cells = <0>;
-
- clk_clkin: clk_clkin {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- };
-
- clk_hpll: clk_hpll@70 {
- #clock-cells = <0>;
- compatible = "aspeed,g4-hpll-clock", "fixed-clock";
- reg = <0x70>;
- clocks = <&clk_clkin>;
- clock-frequency = <384000000>;
- };
-
- clk_ahb: clk_ahb@70 {
- #clock-cells = <0>;
- compatible = "aspeed,g4-ahb-clock", "fixed-clock";
- reg = <0x70>;
- clocks = <&clk_hpll>;
- clock-frequency = <192000000>;
- };
-
- clk_apb: clk_apb@8 {
- #clock-cells = <0>;
- compatible = "aspeed,g4-apb-clock", "fixed-clock";
- reg = <0x08>;
- clocks = <&clk_hpll>;
- clock-frequency = <48000000>;
- };
-
- clk_uart: clk_uart@2c{
- #clock-cells = <0>;
- compatible = "aspeed,g4-uart-clock", "fixed-clock";
- reg = <0x2c>;
- clock-frequency = <24000000>;
- };
+ #clock-cells = <1>;
+ #reset-cells = <1>;
pinctrl: pinctrl {
compatible = "aspeed,g4-pinctrl";
@@ -157,7 +123,7 @@
adc: adc@1e6e9000 {
compatible = "aspeed,ast2400-adc";
reg = <0x1e6e9000 0xb0>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
#io-channel-cells = <1>;
status = "disabled";
};
@@ -182,7 +148,7 @@
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
interrupts = <16 17 18 35 36 37 38 39>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
clock-names = "PCLK";
};
@@ -191,7 +157,7 @@
reg = <0x1e783000 0x20>;
reg-shift = <2>;
interrupts = <9>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
no-loopback-test;
status = "disabled";
};
@@ -201,7 +167,7 @@
reg = <0x1e784000 0x20>;
reg-shift = <2>;
interrupts = <10>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
no-loopback-test;
status = "disabled";
};
@@ -221,7 +187,7 @@
reg = <0x1e787000 0x40>;
reg-shift = <2>;
interrupts = <8>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_APB>;
no-loopback-test;
status = "disabled";
};
@@ -266,7 +232,7 @@
reg = <0x1e78d000 0x20>;
reg-shift = <2>;
interrupts = <32>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
no-loopback-test;
status = "disabled";
};
@@ -276,7 +242,7 @@
reg = <0x1e78e000 0x20>;
reg-shift = <2>;
interrupts = <33>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
no-loopback-test;
status = "disabled";
};
@@ -286,7 +252,7 @@
reg = <0x1e78f000 0x20>;
reg-shift = <2>;
interrupts = <34>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
no-loopback-test;
status = "disabled";
};
@@ -317,7 +283,8 @@
reg = <0x40 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <0>;
interrupt-parent = <&i2c_ic>;
@@ -332,7 +299,8 @@
reg = <0x80 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <1>;
interrupt-parent = <&i2c_ic>;
@@ -347,7 +315,8 @@
reg = <0xc0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <2>;
interrupt-parent = <&i2c_ic>;
@@ -363,7 +332,8 @@
reg = <0x100 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <3>;
interrupt-parent = <&i2c_ic>;
@@ -379,7 +349,8 @@
reg = <0x140 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <4>;
interrupt-parent = <&i2c_ic>;
@@ -395,7 +366,8 @@
reg = <0x180 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <5>;
interrupt-parent = <&i2c_ic>;
@@ -411,7 +383,8 @@
reg = <0x1c0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <6>;
interrupt-parent = <&i2c_ic>;
@@ -427,7 +400,8 @@
reg = <0x300 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <7>;
interrupt-parent = <&i2c_ic>;
@@ -443,7 +417,8 @@
reg = <0x340 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <8>;
interrupt-parent = <&i2c_ic>;
@@ -459,7 +434,8 @@
reg = <0x380 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <9>;
interrupt-parent = <&i2c_ic>;
@@ -475,7 +451,8 @@
reg = <0x3c0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <10>;
interrupt-parent = <&i2c_ic>;
@@ -491,7 +468,8 @@
reg = <0x400 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <11>;
interrupt-parent = <&i2c_ic>;
@@ -507,7 +485,8 @@
reg = <0x440 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <12>;
interrupt-parent = <&i2c_ic>;
@@ -523,7 +502,8 @@
reg = <0x480 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <13>;
interrupt-parent = <&i2c_ic>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 7861631940fe..90bc09d93ea6 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
+#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
@@ -141,55 +142,18 @@
ranges;
syscon: syscon@1e6e2000 {
- compatible = "aspeed,g5-scu", "syscon", "simple-mfd";
+ compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
#address-cells = <1>;
#size-cells = <0>;
-
- clk_clkin: clk_clkin@70 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-clkin-clock", "fixed-clock";
- reg = <0x70>;
- clock-frequency = <24000000>;
- };
-
- clk_hpll: clk_hpll@24 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-hpll-clock", "fixed-clock";
- reg = <0x24>;
- clocks = <&clk_clkin>;
- clock-frequency = <792000000>;
- };
-
- clk_ahb: clk_ahb@70 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-ahb-clock", "fixed-clock";
- reg = <0x70>;
- clocks = <&clk_hpll>;
- clock-frequency = <198000000>;
- };
-
- clk_apb: clk_apb@8 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-apb-clock", "fixed-clock";
- reg = <0x08>;
- clocks = <&clk_hpll>;
- clock-frequency = <24750000>;
- };
-
- clk_uart: clk_uart@2c {
- #clock-cells = <0>;
- compatible = "aspeed,uart-clock", "fixed-clock";
- reg = <0x2c>;
- clock-frequency = <24000000>;
- };
+ #clock-cells = <1>;
+ #reset-cells = <1>;
pinctrl: pinctrl {
compatible = "aspeed,g5-pinctrl";
aspeed,external-nodes = <&gfx &lhc>;
};
-
};
gfx: display@1e6e6000 {
@@ -201,7 +165,7 @@
adc: adc@1e6e9000 {
compatible = "aspeed,ast2500-adc";
reg = <0x1e6e9000 0xb0>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
#io-channel-cells = <1>;
status = "disabled";
};
@@ -226,7 +190,7 @@
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
interrupts = <16 17 18 35 36 37 38 39>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
clock-names = "PCLK";
};
@@ -235,7 +199,7 @@
reg = <0x1e783000 0x20>;
reg-shift = <2>;
interrupts = <9>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
no-loopback-test;
status = "disabled";
};
@@ -245,7 +209,7 @@
reg = <0x1e784000 0x20>;
reg-shift = <2>;
interrupts = <10>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
no-loopback-test;
status = "disabled";
};
@@ -270,8 +234,8 @@
compatible = "aspeed,ast2500-vuart";
reg = <0x1e787000 0x40>;
reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
+ interrupts = <8>;
+ clocks = <&syscon ASPEED_CLK_APB>;
no-loopback-test;
status = "disabled";
};
@@ -318,7 +282,7 @@
reg = <0x1e78d000 0x20>;
reg-shift = <2>;
interrupts = <32>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
no-loopback-test;
status = "disabled";
};
@@ -328,7 +292,7 @@
reg = <0x1e78e000 0x20>;
reg-shift = <2>;
interrupts = <33>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
no-loopback-test;
status = "disabled";
};
@@ -338,7 +302,7 @@
reg = <0x1e78f000 0x20>;
reg-shift = <2>;
interrupts = <34>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
no-loopback-test;
status = "disabled";
};
@@ -369,7 +333,8 @@
reg = <0x40 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <0>;
interrupt-parent = <&i2c_ic>;
@@ -384,7 +349,8 @@
reg = <0x80 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <1>;
interrupt-parent = <&i2c_ic>;
@@ -399,7 +365,8 @@
reg = <0xc0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <2>;
interrupt-parent = <&i2c_ic>;
@@ -415,7 +382,8 @@
reg = <0x100 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <3>;
interrupt-parent = <&i2c_ic>;
@@ -431,7 +399,8 @@
reg = <0x140 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <4>;
interrupt-parent = <&i2c_ic>;
@@ -447,7 +416,8 @@
reg = <0x180 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <5>;
interrupt-parent = <&i2c_ic>;
@@ -463,7 +433,8 @@
reg = <0x1c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <6>;
interrupt-parent = <&i2c_ic>;
@@ -479,7 +450,8 @@
reg = <0x300 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <7>;
interrupt-parent = <&i2c_ic>;
@@ -495,7 +467,8 @@
reg = <0x340 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <8>;
interrupt-parent = <&i2c_ic>;
@@ -511,7 +484,8 @@
reg = <0x380 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <9>;
interrupt-parent = <&i2c_ic>;
@@ -527,7 +501,8 @@
reg = <0x3c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <10>;
interrupt-parent = <&i2c_ic>;
@@ -543,7 +518,8 @@
reg = <0x400 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <11>;
interrupt-parent = <&i2c_ic>;
@@ -559,7 +535,8 @@
reg = <0x440 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <12>;
interrupt-parent = <&i2c_ic>;
@@ -575,7 +552,8 @@
reg = <0x480 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <13>;
interrupt-parent = <&i2c_ic>;
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 07/20] ARM: dts: aspeed: Add watchdog clocks
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
` (3 preceding siblings ...)
2017-12-11 5:06 ` [PATCH 05/20] ARM: dts: aspeed: Add proper clock references Joel Stanley
@ 2017-12-11 5:06 ` Joel Stanley
2017-12-11 5:06 ` [PATCH 08/20] ARM: dts: aspeed: Add flash controller clocks Joel Stanley
` (11 subsequent siblings)
16 siblings, 0 replies; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 2 ++
arch/arm/boot/dts/aspeed-g5.dtsi | 3 +++
2 files changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index cf407b4db630..2e3666d4fbeb 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -177,11 +177,13 @@
wdt1: watchdog@1e785000 {
compatible = "aspeed,ast2400-wdt";
reg = <0x1e785000 0x1c>;
+ clocks = <&syscon ASPEED_CLK_APB>;
};
wdt2: watchdog@1e785020 {
compatible = "aspeed,ast2400-wdt";
reg = <0x1e785020 0x1c>;
+ clocks = <&syscon ASPEED_CLK_APB>;
};
vuart: serial@1e787000 {
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index ab26156d6822..24bb2d16b900 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -219,16 +219,19 @@
wdt1: watchdog@1e785000 {
compatible = "aspeed,ast2500-wdt";
reg = <0x1e785000 0x20>;
+ clocks = <&syscon ASPEED_CLK_APB>;
};
wdt2: watchdog@1e785020 {
compatible = "aspeed,ast2500-wdt";
reg = <0x1e785020 0x20>;
+ clocks = <&syscon ASPEED_CLK_APB>;
};
wdt3: watchdog@1e785040 {
compatible = "aspeed,ast2500-wdt";
reg = <0x1e785040 0x20>;
+ clocks = <&syscon ASPEED_CLK_APB>;
status = "disabled";
};
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 08/20] ARM: dts: aspeed: Add flash controller clocks
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
` (4 preceding siblings ...)
2017-12-11 5:06 ` [PATCH 07/20] ARM: dts: aspeed: Add watchdog clocks Joel Stanley
@ 2017-12-11 5:06 ` Joel Stanley
2017-12-11 5:06 ` [PATCH 09/20] ARM: dts: aspeed: Add clock phandle to GPIO Joel Stanley
` (10 subsequent siblings)
16 siblings, 0 replies; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 2 ++
arch/arm/boot/dts/aspeed-g5.dtsi | 3 +++
2 files changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 2e3666d4fbeb..afac0ca0cb10 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -56,6 +56,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2400-fmc";
+ clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
interrupts = <19>;
flash@0 {
@@ -71,6 +72,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2400-spi";
+ clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
flash@0 {
reg = < 0 >;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 24bb2d16b900..f3689caf6fe2 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -56,6 +56,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-fmc";
+ clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
interrupts = <19>;
flash@0 {
@@ -81,6 +82,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-spi";
+ clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
flash@0 {
reg = < 0 >;
@@ -100,6 +102,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-spi";
+ clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
flash@0 {
reg = < 0 >;
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 09/20] ARM: dts: aspeed: Add clock phandle to GPIO
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
` (5 preceding siblings ...)
2017-12-11 5:06 ` [PATCH 08/20] ARM: dts: aspeed: Add flash controller clocks Joel Stanley
@ 2017-12-11 5:06 ` Joel Stanley
2017-12-11 5:06 ` [PATCH 10/20] ARM: dts: aspeed: Add PWM and tachometer node Joel Stanley
` (9 subsequent siblings)
16 siblings, 0 replies; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
This enables a feature where the driver can debounce inputs.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 1 +
arch/arm/boot/dts/aspeed-g5.dtsi | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index afac0ca0cb10..fa52a01f50b5 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -144,6 +144,7 @@
reg = <0x1e780000 0x1000>;
interrupts = <20>;
gpio-ranges = <&pinctrl 0 0 220>;
+ clocks = <&syscon ASPEED_CLK_APB>;
interrupt-controller;
};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index f3689caf6fe2..5e6db2aa5c23 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -187,6 +187,7 @@
reg = <0x1e780000 0x1000>;
interrupts = <20>;
gpio-ranges = <&pinctrl 0 0 220>;
+ clocks = <&syscon ASPEED_CLK_APB>;
interrupt-controller;
};
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 10/20] ARM: dts: aspeed: Add PWM and tachometer node
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
` (6 preceding siblings ...)
2017-12-11 5:06 ` [PATCH 09/20] ARM: dts: aspeed: Add clock phandle to GPIO Joel Stanley
@ 2017-12-11 5:06 ` Joel Stanley
2017-12-11 5:06 ` [PATCH 11/20] ARM: dts: aspeed: Add LPC Snoop device Joel Stanley
` (8 subsequent siblings)
16 siblings, 0 replies; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 9 +++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 9 +++++++++
2 files changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index fa52a01f50b5..f6fee40c04c0 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -189,6 +189,15 @@
clocks = <&syscon ASPEED_CLK_APB>;
};
+ pwm_tacho: pwm-tacho-controller@1e786000 {
+ compatible = "aspeed,ast2400-pwm-tacho";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1e786000 0x1000>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ status = "disabled";
+ };
+
vuart: serial@1e787000 {
compatible = "aspeed,ast2400-vuart";
reg = <0x1e787000 0x40>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 5e6db2aa5c23..96a9d2fe3f0d 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -239,6 +239,15 @@
status = "disabled";
};
+ pwm_tacho: pwm-tacho-controller@1e786000 {
+ compatible = "aspeed,ast2500-pwm-tacho";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1e786000 0x1000>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ status = "disabled";
+ };
+
vuart: serial@1e787000 {
compatible = "aspeed,ast2500-vuart";
reg = <0x1e787000 0x40>;
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 11/20] ARM: dts: aspeed: Add LPC Snoop device
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
` (7 preceding siblings ...)
2017-12-11 5:06 ` [PATCH 10/20] ARM: dts: aspeed: Add PWM and tachometer node Joel Stanley
@ 2017-12-11 5:06 ` Joel Stanley
[not found] ` <20171211050704.20621-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
` (7 subsequent siblings)
16 siblings, 0 replies; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
LPC snoop hardware on the ASPEED BMC, used for monitoring
host I/O port activity.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 7 +++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 6 ++++++
2 files changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index f6fee40c04c0..b3580f37f507 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -236,6 +236,13 @@
status = "disabled";
};
+ lpc_snoop: lpc-snoop@0 {
+ compatible = "aspeed,ast2500-lpc-snoop";
+ reg = <0x0 0x80>;
+ interrupts = <8>;
+ status = "disabled";
+ };
+
lhc: lhc@20 {
compatible = "aspeed,ast2500-lhc";
reg = <0x20 0x24 0x48 0x8>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 96a9d2fe3f0d..50766f0629f8 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -287,6 +287,12 @@
status = "disabled";
};
+ lpc_snoop: lpc-snoop@0 {
+ compatible = "aspeed,ast2500-lpc-snoop";
+ reg = <0x0 0x80>;
+ interrupts = <8>;
+ status = "disabled";
+ };
lhc: lhc@20 {
compatible = "aspeed,ast2500-lhc";
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread[parent not found: <20171211050704.20621-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>]
* [PATCH 01/20] dt-bindings: clock: Add ASPEED constants
[not found] ` <20171211050704.20621-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
@ 2017-12-11 5:06 ` Joel Stanley
[not found] ` <20171211050704.20621-2-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2017-12-11 5:06 ` [PATCH 06/20] ARM: dts: aspeed: Add MAC clocks Joel Stanley
` (2 subsequent siblings)
3 siblings, 1 reply; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-aspeed-uLR06cmDAlY/bJ5BZ2RsiQ
These will be merged as part of the clock driver. This commit is
included so the tree will build without the clock series being applied.
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
include/dt-bindings/clock/aspeed-clock.h | 54 ++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 include/dt-bindings/clock/aspeed-clock.h
diff --git a/include/dt-bindings/clock/aspeed-clock.h b/include/dt-bindings/clock/aspeed-clock.h
new file mode 100644
index 000000000000..fe46ab69da5c
--- /dev/null
+++ b/include/dt-bindings/clock/aspeed-clock.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+#ifndef DT_BINDINGS_ASPEED_CLOCK_H
+#define DT_BINDINGS_ASPEED_CLOCK_H
+
+#define ASPEED_CLK_GATE_ECLK 0
+#define ASPEED_CLK_GATE_GCLK 1
+#define ASPEED_CLK_GATE_MCLK 2
+#define ASPEED_CLK_GATE_VCLK 3
+#define ASPEED_CLK_GATE_BCLK 4
+#define ASPEED_CLK_GATE_DCLK 5
+#define ASPEED_CLK_GATE_REFCLK 6
+#define ASPEED_CLK_GATE_USBPORT2CLK 7
+#define ASPEED_CLK_GATE_LCLK 8
+#define ASPEED_CLK_GATE_USBUHCICLK 9
+#define ASPEED_CLK_GATE_D1CLK 10
+#define ASPEED_CLK_GATE_YCLK 11
+#define ASPEED_CLK_GATE_USBPORT1CLK 12
+#define ASPEED_CLK_GATE_UART1CLK 13
+#define ASPEED_CLK_GATE_UART2CLK 14
+#define ASPEED_CLK_GATE_UART5CLK 15
+#define ASPEED_CLK_GATE_ESPICLK 16
+#define ASPEED_CLK_GATE_MAC1CLK 17
+#define ASPEED_CLK_GATE_MAC2CLK 18
+#define ASPEED_CLK_GATE_RSACLK 19
+#define ASPEED_CLK_GATE_UART3CLK 20
+#define ASPEED_CLK_GATE_UART4CLK 21
+#define ASPEED_CLK_GATE_SDCLKCLK 22
+#define ASPEED_CLK_GATE_LHCCLK 23
+#define ASPEED_CLK_HPLL 24
+#define ASPEED_CLK_AHB 25
+#define ASPEED_CLK_APB 26
+#define ASPEED_CLK_UART 27
+#define ASPEED_CLK_SDIO 28
+#define ASPEED_CLK_ECLK 29
+#define ASPEED_CLK_ECLK_MUX 30
+#define ASPEED_CLK_LHCLK 31
+#define ASPEED_CLK_MAC 32
+#define ASPEED_CLK_BCLK 33
+#define ASPEED_CLK_MPLL 34
+
+#define ASPEED_NUM_CLKS 35
+
+#define ASPEED_RESET_XDMA 0
+#define ASPEED_RESET_MCTP 1
+#define ASPEED_RESET_ADC 2
+#define ASPEED_RESET_JTAG_MASTER 3
+#define ASPEED_RESET_MIC 4
+#define ASPEED_RESET_PWM 5
+#define ASPEED_RESET_PCIVGA 6
+#define ASPEED_RESET_I2C 7
+#define ASPEED_RESET_AHB 8
+
+#endif
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 06/20] ARM: dts: aspeed: Add MAC clocks
[not found] ` <20171211050704.20621-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2017-12-11 5:06 ` [PATCH 01/20] dt-bindings: clock: Add ASPEED constants Joel Stanley
@ 2017-12-11 5:06 ` Joel Stanley
2017-12-11 5:06 ` [PATCH 12/20] ARM: dts: aspeed: Remove skeleton.dtsi Joel Stanley
2017-12-11 5:06 ` [PATCH 13/20] ARM: dts: aspeed: Update license headers Joel Stanley
3 siblings, 0 replies; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-aspeed-uLR06cmDAlY/bJ5BZ2RsiQ
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 2 ++
arch/arm/boot/dts/aspeed-g5.dtsi | 2 ++
2 files changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index c87883a7f250..cf407b4db630 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -91,6 +91,7 @@
compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
reg = <0x1e660000 0x180>;
interrupts = <2>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
status = "disabled";
};
@@ -98,6 +99,7 @@
compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
reg = <0x1e680000 0x180>;
interrupts = <3>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 90bc09d93ea6..ab26156d6822 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -125,6 +125,7 @@
compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
reg = <0x1e660000 0x180>;
interrupts = <2>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
status = "disabled";
};
@@ -132,6 +133,7 @@
compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
reg = <0x1e680000 0x180>;
interrupts = <3>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
status = "disabled";
};
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 12/20] ARM: dts: aspeed: Remove skeleton.dtsi
[not found] ` <20171211050704.20621-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2017-12-11 5:06 ` [PATCH 01/20] dt-bindings: clock: Add ASPEED constants Joel Stanley
2017-12-11 5:06 ` [PATCH 06/20] ARM: dts: aspeed: Add MAC clocks Joel Stanley
@ 2017-12-11 5:06 ` Joel Stanley
2017-12-11 5:06 ` [PATCH 13/20] ARM: dts: aspeed: Update license headers Joel Stanley
3 siblings, 0 replies; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-aspeed-uLR06cmDAlY/bJ5BZ2RsiQ
We don't require it for any of the ASPEED systems.
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 1 -
arch/arm/boot/dts/aspeed-g5.dtsi | 1 -
2 files changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b3580f37f507..2d7ac577d6b5 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0
-#include "skeleton.dtsi"
#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 50766f0629f8..030a760696fd 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0
-#include "skeleton.dtsi"
#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 13/20] ARM: dts: aspeed: Update license headers
[not found] ` <20171211050704.20621-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
` (2 preceding siblings ...)
2017-12-11 5:06 ` [PATCH 12/20] ARM: dts: aspeed: Remove skeleton.dtsi Joel Stanley
@ 2017-12-11 5:06 ` Joel Stanley
3 siblings, 0 replies; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-aspeed-uLR06cmDAlY/bJ5BZ2RsiQ
In b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier
to files with no license") these files had the GPL-2.0 licence added
automatically. Update them to be GPL 2.0+ in line with other IBM kernel
contributions.
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
arch/arm/boot/dts/aspeed-ast2500-evb.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 2 +-
arch/arm/boot/dts/aspeed-g4.dtsi | 2 +-
arch/arm/boot/dts/aspeed-g5.dtsi | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 602bc10fdaf4..3e6f38e5d5d0 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
/dts-v1/;
#include "aspeed-g5.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index c786bc2f2919..a8f0c046e83e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
/dts-v1/;
#include "aspeed-g4.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 2d7ac577d6b5..9c175832babc 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 030a760696fd..360329eab7c3 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [PATCH 14/20] ARM: dts: Add OpenBMC flash layout
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
` (9 preceding siblings ...)
[not found] ` <20171211050704.20621-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
@ 2017-12-11 5:06 ` Joel Stanley
2017-12-11 5:06 ` [PATCH 15/20] ARM: dts: aspeed: Sort ASPEED entries in makefile Joel Stanley
` (5 subsequent siblings)
16 siblings, 0 replies; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
This is a layout used by OpenBMC systems. It describes the fixed flash
layout of a 32MB mtd device.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/openbmc-flash-layout.dtsi | 32 +++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 arch/arm/boot/dts/openbmc-flash-layout.dtsi
diff --git a/arch/arm/boot/dts/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
new file mode 100644
index 000000000000..63ad8db7a431
--- /dev/null
+++ b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u-boot@0 {
+ reg = <0x0 0x60000>;
+ label = "u-boot";
+ };
+
+ u-boot-env@60000 {
+ reg = <0x60000 0x20000>;
+ label = "u-boot-env";
+ };
+
+ kernel@80000 {
+ reg = <0x80000 0x440000>;
+ label = "kernel";
+ };
+
+ rofs@0c0000 {
+ reg = <0x4c0000 0x1740000>;
+ label = "rofs";
+ };
+
+ rwfs@1c00000 {
+ reg = <0x1c00000 0x400000>;
+ label = "rwfs";
+ };
+};
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 15/20] ARM: dts: aspeed: Sort ASPEED entries in makefile
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
` (10 preceding siblings ...)
2017-12-11 5:06 ` [PATCH 14/20] ARM: dts: Add OpenBMC flash layout Joel Stanley
@ 2017-12-11 5:06 ` Joel Stanley
2017-12-11 5:07 ` [PATCH 16/20] ARM: dts: aspeed: Add Witherspoon BMC machine Joel Stanley
` (4 subsequent siblings)
16 siblings, 0 replies; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
In preperation for adding more boards.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/Makefile | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9caf21..5d1e9d37bf3a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1101,7 +1101,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
-dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \
- aspeed-bmc-opp-romulus.dtb \
- aspeed-ast2500-evb.dtb
+dtb-$(CONFIG_ARCH_ASPEED) += \
+ aspeed-ast2500-evb.dtb \
+ aspeed-bmc-opp-palmetto.dtb \
+ aspeed-bmc-opp-romulus.dtb
endif
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 16/20] ARM: dts: aspeed: Add Witherspoon BMC machine
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
` (11 preceding siblings ...)
2017-12-11 5:06 ` [PATCH 15/20] ARM: dts: aspeed: Sort ASPEED entries in makefile Joel Stanley
@ 2017-12-11 5:07 ` Joel Stanley
[not found] ` <20171211050704.20621-17-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2017-12-11 5:07 ` [PATCH 17/20] ARM: dts: aspeed: Add Ingrasys Zaius " Joel Stanley
` (3 subsequent siblings)
16 siblings, 1 reply; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:07 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed,
Brandon Wyman, Matt Spinler, Brad Bishop, Edward A . James
The Witherspoon BMC is an ASPEED ast2500 based BMC that is part of an
OpenPower Power9 server.
This adds the device tree description for most upstream components. It
is a squashed commit from the OpenBMC kernel tree.
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Edward A. James <eajames@us.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/Makefile | 4 +-
arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts | 547 +++++++++++++++++++++++
2 files changed, 550 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5d1e9d37bf3a..15a9207319c1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1104,5 +1104,7 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-bmc-opp-palmetto.dtb \
- aspeed-bmc-opp-romulus.dtb
+ aspeed-bmc-opp-romulus.dtb \
+ aspeed-bmc-opp-witherspoon.dtb
+
endif
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
new file mode 100644
index 000000000000..9a0937512e5b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -0,0 +1,547 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "Witherspoon BMC";
+ compatible = "ibm,witherspoon-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <1000>;
+
+ fan0-presence {
+ label = "fan0-presence";
+ gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+ linux,code = <4>;
+ };
+
+ fan1-presence {
+ label = "fan1-presence";
+ gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <5>;
+ };
+
+ fan2-presence {
+ label = "fan2-presence";
+ gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+ linux,code = <6>;
+ };
+
+ fan3-presence {
+ label = "fan3-presence";
+ gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <7>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ fan0 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ fan1 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+ };
+
+ fan2 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
+ };
+
+ fan3 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
+ };
+
+ front-fault {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ front-power {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ front-id {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ rear-fault {
+ gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-id {
+ gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-power {
+ gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ power-button {
+ gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ iio-hwmon-dps310 {
+ compatible = "iio-hwmon";
+ io-channels = <&dps 0>;
+ };
+
+ iio-hwmon-bmp280 {
+ compatible = "iio-hwmon";
+ io-channels = <&bmp 1>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+
+ flash@1 {
+ status = "okay";
+ label = "alt";
+ m25p,fast-read;
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ };
+};
+
+&uart1 {
+ /* Rear RS-232 connector */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart2 {
+ /* APSS */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&i2c2 {
+ status = "okay";
+
+ /* MUX ->
+ * Samtec 1
+ * Samtec 2
+ */
+};
+
+&i2c3 {
+ status = "okay";
+
+ bmp: bmp280@77 {
+ compatible = "bosch,bmp280";
+ reg = <0x77>;
+ #io-channel-cells = <1>;
+ };
+
+ max31785@52 {
+ compatible = "maxim,max31785a";
+ reg = <0x52>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ dps: dps310@76 {
+ compatible = "infineon,dps310";
+ reg = <0x76>;
+ #io-channel-cells = <0>;
+ };
+
+ pca0: pca9552@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ power-supply@68 {
+ compatible = "ibm,cffps1";
+ reg = <0x68>;
+ };
+
+ power-supply@69 {
+ compatible = "ibm,cffps1";
+ reg = <0x69>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ tmp423a@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+
+ ir35221@70 {
+ compatible = "infineon,ir35221";
+ reg = <0x70>;
+ };
+
+ ir35221@71 {
+ compatible = "infineon,ir35221";
+ reg = <0x71>;
+ };
+};
+
+
+&i2c5 {
+ status = "okay";
+
+ tmp423a@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+
+ ir35221@70 {
+ compatible = "infineon,ir35221";
+ reg = <0x70>;
+ };
+
+ ir35221@71 {
+ compatible = "infineon,ir35221";
+ reg = <0x71>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ tmp275@4a {
+ compatible = "ti,tmp275";
+ reg = <0x4a>;
+ };
+};
+
+&i2c10 {
+ /* MUX
+ * -> PCIe Slot 3
+ * -> PCIe Slot 4
+ */
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+
+ pca9552: pca9552@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+ "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF",
+ "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+ "GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF",
+ "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+ "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+ "GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+ "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ ucd90160@64 {
+ compatible = "ti,ucd90160";
+ reg = <0x64>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 17/20] ARM: dts: aspeed: Add Ingrasys Zaius BMC machine
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
` (12 preceding siblings ...)
2017-12-11 5:07 ` [PATCH 16/20] ARM: dts: aspeed: Add Witherspoon BMC machine Joel Stanley
@ 2017-12-11 5:07 ` Joel Stanley
2017-12-11 5:07 ` [PATCH 18/20] ARM: dts: aspeed: Add Qanta Q71L " Joel Stanley
` (2 subsequent siblings)
16 siblings, 0 replies; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:07 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed,
Robert Lippert, Peter Hanson, Rick Altherr
From: Xo Wang <xow@google.com>
Zaius is a POWER9 platform announced at OpenPOWER Summit 2016. This adds
basic DTS support for its AST2500 BMC.
This adds the device tree description for most upstream components. It
is a squashed commit of all of the patches from the OpenBMC kernel tree.
Signed-off-by: Xo Wang <xow@google.com>
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Robert Lippert <rlippert@google.com>
Signed-off-by: Peter Hanson <peterh@google.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Rick Altherr <raltherr@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/Makefile | 4 +-
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 427 +++++++++++++++++++++++++++++
2 files changed, 429 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 15a9207319c1..48c55f307aa9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1105,6 +1105,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \
- aspeed-bmc-opp-witherspoon.dtb
-
+ aspeed-bmc-opp-witherspoon.dtb \
+ aspeed-bmc-opp-zaius.dtb
endif
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
new file mode 100644
index 000000000000..90d77012495d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Zaius BMC";
+ compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+ };
+
+ onewire0 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+ };
+
+ onewire1 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ };
+
+ onewire2 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ onewire3 {
+ compatible = "w1-gpio";
+ gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 7)>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sys_boot_status {
+ label = "System boot status";
+ gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>;
+ };
+
+ attention {
+ label = "Attention";
+ gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>;
+ };
+
+ plt_fault {
+ label = "Platform fault";
+ gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>;
+ };
+
+ hdd_fault {
+ label = "Onboard drive fault";
+ gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 12>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ };
+};
+
+&spi2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2ck_default
+ &pinctrl_spi2cs0_default
+ &pinctrl_spi2cs1_default
+ &pinctrl_spi2miso_default
+ &pinctrl_spi2mosi_default>;
+
+ flash@0 {
+ status = "okay";
+ };
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ rtc@68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ };
+
+ ucd90160@64 {
+ compatible = "ti,ucd90160";
+ reg = <0x64>;
+ };
+
+ /* Power sequencer UCD90160 PMBUS @64h
+ * FRU AT24C64D @50h
+ * RTC PCF8523 @68h
+ * Clock buffer 9DBL04 @6dh
+ */
+};
+
+&i2c1 {
+ status = "okay";
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* MUX1 PCA9546A @71h
+ * PCIe 0
+ * PCIe 1
+ * PCIe 2
+ * TPM header
+ */
+};
+
+&i2c2 {
+ status = "disabled";
+
+ /* OCP Mezz Connector A (OOB SMBUS) */
+};
+
+&i2c3 {
+ status = "disabled";
+
+ /* OCP Mezz Connector A (PCIe slot SMBUS) */
+};
+
+&i2c4 {
+ status = "okay";
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* MUX1 PCA9546A @71h
+ * PCIe 3
+ * PCIe 4
+ */
+};
+
+
+&i2c5 {
+ status = "disabled";
+
+ /* CPU0 PRM 0.7V */
+ /* CPU0 PRM 1.2V CH03 */
+ /* CPU0 PRM 0.8V */
+ /* CPU0 PRM 1.2V CH47 */
+};
+
+&i2c6 {
+ status = "disabled";
+
+ /* CPU1 PRM 0.7V */
+ /* CPU1 PRM 1.2V CH03 */
+ /* CPU1 PRM 0.8V */
+ /* CPU1 PRM 1.2V CH47 */
+};
+
+&i2c7 {
+ status = "okay";
+
+ pca9541a@70 {
+ compatible = "nxp,pca9541";
+ reg = <0x70>;
+
+ i2c-arb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hotswap@54 {
+ compatible = "ti,lm5066i";
+ reg = <0x54>;
+ };
+ };
+ };
+
+ /* Master selector PCA9541A @70h (other master: CPU0)
+ * LM5066I PMBUS @10h
+ */
+
+ /* 12V Quarter Brick DC/DC Converter Q54SJ12050 @61h */
+ power-brick@61 {
+ compatible = "delta,dps800";
+ reg = <0x61>;
+ };
+
+ /* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+ /* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */
+ /* CPU0 VR ISL68137 0.8V PMBUS @60h */
+ /* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @41h */
+ /* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */
+};
+
+&i2c8 {
+ status = "okay";
+
+ /* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @65h */
+ /* CPU1 VR ISL68137 1.2V CH03 PMBUS @44h */
+ /* CPU1 VR ISL68137 0.8V PMBUS @61h */
+ /* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */
+ /* CPU0 VR ISL68137 1.2V CH47 PMBUS @45h */
+};
+
+
+&i2c9 {
+ status = "disabled";
+
+ /* Fan board */
+};
+
+&i2c10 {
+ status = "disabled";
+};
+
+&i2c11 {
+ status = "disabled";
+
+ /* GPU sideband */
+};
+
+&i2c12 {
+ status = "disabled";
+};
+
+&i2c13 {
+ status = "disabled";
+
+ /* MUX PI3USB102
+ * CPU0 debug
+ * CPU1 debug
+ */
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+
+ pinctrl_gpioh_unbiased: gpioi_unbiased {
+ pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
+ bias-disable;
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioh_unbiased>;
+
+ line_iso_u146_en {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "iso_u164_en";
+ };
+
+ ncsi_mux_en_n {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "ncsi_mux_en_n";
+ };
+
+ line_bmc_i2c2_sw_rst_n {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "bmc_i2c2_sw_rst_n";
+ };
+
+ line_bmc_i2c5_sw_rst_n {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "bmc_i2c5_sw_rst_n";
+ };
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+};
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 18/20] ARM: dts: aspeed: Add Qanta Q71L BMC machine
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
` (13 preceding siblings ...)
2017-12-11 5:07 ` [PATCH 17/20] ARM: dts: aspeed: Add Ingrasys Zaius " Joel Stanley
@ 2017-12-11 5:07 ` Joel Stanley
2017-12-11 5:07 ` [PATCH 19/20] ARM: dts: aspeed-romulus: Update Romulus system Joel Stanley
2017-12-11 5:07 ` [PATCH 20/20] ARM: dts: aspeed-plametto: Add flash layout Joel Stanley
16 siblings, 0 replies; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:07 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Rick Altherr, Cédric Le Goater, Benjamin Herrenschmidt,
Jeremy Kerr, devicetree, linux-arm-kernel, linux-kernel,
linux-aspeed, Peter Hanson
From: Rick Altherr <raltherr@google.com>
The Qanta Q71L BMC is an ASPEED ast2400 based BMC that is part of a
Qanta x86 server.
This adds the device tree description for most upstream components. It
is a squashed commit from the OpenBMC kernel tree.
Signed-off-by: Peter Hanson <peterh@google.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Rick Altherr <raltherr@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts | 458 +++++++++++++++++++++++++++
2 files changed, 460 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 48c55f307aa9..5ab5d9169511 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1106,5 +1106,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \
aspeed-bmc-opp-witherspoon.dtb \
- aspeed-bmc-opp-zaius.dtb
+ aspeed-bmc-opp-zaius.dtb \
+ aspeed-bmc-quanta-q71l.dtb
endif
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
new file mode 100644
index 000000000000..2f40bab63149
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+
+/ {
+ model = "Quanta Q71L BMC";
+ compatible = "quanta,q71l-bmc", "aspeed,ast2400";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory {
+ reg = <0x40000000 0x8000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@47800000 {
+ no-map;
+ reg = <0x47800000 0x00800000>; /* 8MB */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ identify {
+ gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 11>;
+ };
+
+ i2c1mux: i2cmux {
+ compatible = "i2c-mux-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* mux-gpios = <&sgpio 10 GPIO_ACTIVE_HIGH> */
+ i2c-parent = <&i2c1>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default
+ &pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* temp2 inlet */
+ tmp75@4c {
+ compatible = "ti,tmp75";
+ reg = <0x4c>;
+ };
+
+ /* temp3 */
+ tmp75@4e {
+ compatible = "ti,tmp75";
+ reg = <0x4e>;
+ };
+
+ /* temp1 */
+ tmp75@4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+
+ /* Baseboard FRU */
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ };
+
+ /* FP FRU */
+ eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ /* 0: PCIe Slot 2,
+ * Slot 3,
+ * Slot 6,
+ * Slot 7
+ */
+ i2c-switch@74 {
+ compatible = "nxp,pca9546";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect; /* may use mux@77 next. */
+
+ i2c_pcie2: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c_pcie3: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c_pcie6: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c_pcie7: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ /* 0: PCIe Slot 1,
+ * Slot 4,
+ * Slot 5,
+ * Slot 8,
+ * Slot 9,
+ * Slot 10,
+ * SSD 1,
+ * SSD 2
+ */
+ i2c-switch@77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+ i2c-mux-idle-disconnect; /* may use mux@74 next. */
+
+ i2c_pcie1: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c_pcie4: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c_pcie5: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c_pcie8: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c_pcie9: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c_pcie10: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c_ssd1: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c_ssd2: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ /* BIOS FRU */
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+
+ /* 0: PSU4
+ * PSU1
+ * PSU3
+ * PSU2
+ */
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c_psu4: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c_psu1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c_psu3: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c_psu2: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ /* PDB FRU */
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ /* BMC FRU */
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&vuart {
+ status = "okay";
+};
+
+&wdt2 {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan@4 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan@5 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan@6 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan@7 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+};
+
+&i2c1mux {
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Memory Riser 1 FRU */
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+
+ /* Memory Riser 2 FRU */
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ };
+
+ /* Memory Riser 3 FRU */
+ eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+
+ /* Memory Riser 4 FRU */
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Memory Riser 5 FRU */
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+
+ /* Memory Riser 6 FRU */
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ };
+
+ /* Memory Riser 7 FRU */
+ eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+
+ /* Memory Riser 8 FRU */
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ };
+ };
+};
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 19/20] ARM: dts: aspeed-romulus: Update Romulus system
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
` (14 preceding siblings ...)
2017-12-11 5:07 ` [PATCH 18/20] ARM: dts: aspeed: Add Qanta Q71L " Joel Stanley
@ 2017-12-11 5:07 ` Joel Stanley
2017-12-11 5:07 ` [PATCH 20/20] ARM: dts: aspeed-plametto: Add flash layout Joel Stanley
16 siblings, 0 replies; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:07 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
- Fix incorrect RAM size
- Remove alias; these are now specified in the dtsi
- Add newly upstreamed devices
- Include OpenBMC flash layout
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 155 +++++++++++++++++++++++++--
1 file changed, 149 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 8067793129ea..bfdf643584df 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
/dts-v1/;
#include "aspeed-g5.dtsi"
@@ -7,17 +7,13 @@
model = "Romulus BMC";
compatible = "ibm,romulus-bmc", "aspeed,ast2500";
- aliases {
- serial4 = &uart5;
- };
-
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlyprintk";
};
memory {
- reg = <0x80000000 0x40000000>;
+ reg = <0x80000000 0x20000000>;
};
reserved-memory {
@@ -29,6 +25,73 @@
no-map;
reg = <0xbf000000 0x01000000>; /* 16M */
};
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ fault {
+ gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ identify {
+ gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ };
+
+ power {
+ gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(J, 2)>;
+ };
+ };
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
};
};
@@ -38,6 +101,7 @@
status = "okay";
m25p,fast-read;
label = "bmc";
+#include "openbmc-flash-layout.dtsi"
};
};
@@ -53,6 +117,12 @@
};
};
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
&uart1 {
/* Rear RS-232 connector */
status = "okay";
@@ -81,6 +151,10 @@
pinctrl-0 = <&pinctrl_rmii1_default>;
};
+&i2c1 {
+ status = "okay";
+};
+
&i2c2 {
status = "okay";
};
@@ -133,8 +207,77 @@
&i2c12 {
status = "okay";
+
+ max31785@52 {
+ compatible = "maxim,max31785";
+ reg = <0x52>;
+ };
+};
+
+&gpio {
+ nic_func_mode0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "nic_func_mode0";
+ };
+ nic_func_mode1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "nic_func_mode1";
+ };
};
&vuart {
status = "okay";
};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+ };
+
+ fan@1 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+ };
+
+ fan@2 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+ };
+
+ fan@3 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+ };
+
+ fan@4 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+ };
+
+ fan@5 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+ };
+
+ fan@6 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+ };
+};
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread* [PATCH 20/20] ARM: dts: aspeed-plametto: Add flash layout
2017-12-11 5:06 [PATCH 00/20] ARM: dts: aspeed: updates and new machines Joel Stanley
` (15 preceding siblings ...)
2017-12-11 5:07 ` [PATCH 19/20] ARM: dts: aspeed-romulus: Update Romulus system Joel Stanley
@ 2017-12-11 5:07 ` Joel Stanley
16 siblings, 0 replies; 30+ messages in thread
From: Joel Stanley @ 2017-12-11 5:07 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Arnd Bergmann, Andrew Jeffery,
Patrick Venture, Xo Wang, Lei YU
Cc: Cédric Le Goater, Benjamin Herrenschmidt, Jeremy Kerr,
devicetree, linux-arm-kernel, linux-kernel, linux-aspeed
The OpenBMC flash layout is used by Palmetto systems.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index a8f0c046e83e..cc18137386f2 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -34,6 +34,7 @@
status = "okay";
m25p,fast-read;
label = "bmc";
+#include "openbmc-flash-layout.dtsi"
};
};
--
2.14.1
^ permalink raw reply related [flat|nested] 30+ messages in thread