[PATCH v2 1/5] extcon: usbc-cros-ec: add support to notify USB type cables.

[PATCH v2 1/5] extcon: usbc-cros-ec: add support to notify USB type cables.

[Enric Balletbo i Serra]

From: Benson Leung <bleung-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

Extend the driver to notify host and device type cables and the presence
of power.

Signed-off-by: Benson Leung <bleung-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
Reviewed-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
Changes since v1:
 - Use the BIT macro. Requested by Lee Jones.
 - Add the Reviewed-by: Chanwoo Choi.

 drivers/extcon/extcon-usbc-cros-ec.c | 142 ++++++++++++++++++++++++++++++++++-
 include/linux/mfd/cros_ec_commands.h |  17 +++++
 2 files changed, 155 insertions(+), 4 deletions(-)

diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c
index 6187f73..6721ab0 100644
--- a/drivers/extcon/extcon-usbc-cros-ec.c
+++ b/drivers/extcon/extcon-usbc-cros-ec.c
@@ -34,16 +34,26 @@ struct cros_ec_extcon_info {
 
 	struct notifier_block notifier;
 
+	unsigned int dr; /* data role */
+	bool pr; /* power role (true if VBUS enabled) */
 	bool dp; /* DisplayPort enabled */
 	bool mux; /* SuperSpeed (usb3) enabled */
 	unsigned int power_type;
 };
 
 static const unsigned int usb_type_c_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
 	EXTCON_DISP_DP,
 	EXTCON_NONE,
 };
 
+enum usb_data_roles {
+	DR_NONE,
+	DR_HOST,
+	DR_DEVICE,
+};
+
 /**
  * cros_ec_pd_command() - Send a command to the EC.
  * @info: pointer to struct cros_ec_extcon_info
@@ -150,6 +160,7 @@ static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info,
 	pd_control.port = info->port_id;
 	pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE;
 	pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE;
+	pd_control.swap = USB_PD_CTRL_SWAP_NONE;
 	ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1,
 				 &pd_control, sizeof(pd_control),
 				 &resp, sizeof(resp));
@@ -183,11 +194,72 @@ static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info)
 	return resp.num_ports;
 }
 
+static const char *cros_ec_usb_role_string(unsigned int role)
+{
+	return role == DR_NONE ? "DISCONNECTED" :
+		(role == DR_HOST ? "DFP" : "UFP");
+}
+
+static const char *cros_ec_usb_power_type_string(unsigned int type)
+{
+	switch (type) {
+	case USB_CHG_TYPE_NONE:
+		return "USB_CHG_TYPE_NONE";
+	case USB_CHG_TYPE_PD:
+		return "USB_CHG_TYPE_PD";
+	case USB_CHG_TYPE_PROPRIETARY:
+		return "USB_CHG_TYPE_PROPRIETARY";
+	case USB_CHG_TYPE_C:
+		return "USB_CHG_TYPE_C";
+	case USB_CHG_TYPE_BC12_DCP:
+		return "USB_CHG_TYPE_BC12_DCP";
+	case USB_CHG_TYPE_BC12_CDP:
+		return "USB_CHG_TYPE_BC12_CDP";
+	case USB_CHG_TYPE_BC12_SDP:
+		return "USB_CHG_TYPE_BC12_SDP";
+	case USB_CHG_TYPE_OTHER:
+		return "USB_CHG_TYPE_OTHER";
+	case USB_CHG_TYPE_VBUS:
+		return "USB_CHG_TYPE_VBUS";
+	case USB_CHG_TYPE_UNKNOWN:
+		return "USB_CHG_TYPE_UNKNOWN";
+	default:
+		return "USB_CHG_TYPE_UNKNOWN";
+	}
+}
+
+static bool cros_ec_usb_power_type_is_wall_wart(unsigned int type,
+						unsigned int role)
+{
+	switch (type) {
+	/* FIXME : Guppy, Donnettes, and other chargers will be miscategorized
+	 * because they identify with USB_CHG_TYPE_C, but we can't return true
+	 * here from that code because that breaks Suzy-Q and other kinds of
+	 * USB Type-C cables and peripherals.
+	 */
+	case USB_CHG_TYPE_PROPRIETARY:
+	case USB_CHG_TYPE_BC12_DCP:
+		return true;
+	case USB_CHG_TYPE_PD:
+	case USB_CHG_TYPE_C:
+	case USB_CHG_TYPE_BC12_CDP:
+	case USB_CHG_TYPE_BC12_SDP:
+	case USB_CHG_TYPE_OTHER:
+	case USB_CHG_TYPE_VBUS:
+	case USB_CHG_TYPE_UNKNOWN:
+	case USB_CHG_TYPE_NONE:
+	default:
+		return false;
+	}
+}
+
 static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
 				       bool force)
 {
 	struct device *dev = info->dev;
 	int role, power_type;
+	unsigned int dr = DR_NONE;
+	bool pr = false;
 	bool polarity = false;
 	bool dp = false;
 	bool mux = false;
@@ -206,9 +278,12 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
 			dev_err(dev, "failed getting role err = %d\n", role);
 			return role;
 		}
+		dev_dbg(dev, "disconnected\n");
 	} else {
 		int pd_mux_state;
 
+		dr = (role & PD_CTRL_RESP_ROLE_DATA) ? DR_HOST : DR_DEVICE;
+		pr = (role & PD_CTRL_RESP_ROLE_POWER);
 		pd_mux_state = cros_ec_usb_get_pd_mux_state(info);
 		if (pd_mux_state < 0)
 			pd_mux_state = USB_PD_MUX_USB_ENABLED;
@@ -216,20 +291,62 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
 		dp = pd_mux_state & USB_PD_MUX_DP_ENABLED;
 		mux = pd_mux_state & USB_PD_MUX_USB_ENABLED;
 		hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ;
-	}
 
-	if (force || info->dp != dp || info->mux != mux ||
-		info->power_type != power_type) {
+		dev_dbg(dev,
+			"connected role 0x%x pwr type %d dr %d pr %d pol %d mux %d dp %d hpd %d\n",
+			role, power_type, dr, pr, polarity, mux, dp, hpd);
+	}
 
+	/*
+	 * When there is no USB host (e.g. USB PD charger),
+	 * we are not really a UFP for the AP.
+	 */
+	if (dr == DR_DEVICE &&
+	    cros_ec_usb_power_type_is_wall_wart(power_type, role))
+		dr = DR_NONE;
+
+	if (force || info->dr != dr || info->pr != pr || info->dp != dp ||
+	    info->mux != mux || info->power_type != power_type) {
+		bool host_connected = false, device_connected = false;
+
+		dev_dbg(dev, "Type/Role switch! type = %s role = %s\n",
+			cros_ec_usb_power_type_string(power_type),
+			cros_ec_usb_role_string(dr));
+		info->dr = dr;
+		info->pr = pr;
 		info->dp = dp;
 		info->mux = mux;
 		info->power_type = power_type;
 
-		extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
+		if (dr == DR_DEVICE)
+			device_connected = true;
+		else if (dr == DR_HOST)
+			host_connected = true;
 
+		extcon_set_state(info->edev, EXTCON_USB, device_connected);
+		extcon_set_state(info->edev, EXTCON_USB_HOST, host_connected);
+		extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
+		extcon_set_property(info->edev, EXTCON_USB,
+				    EXTCON_PROP_USB_VBUS,
+				    (union extcon_property_value)(int)pr);
+		extcon_set_property(info->edev, EXTCON_USB_HOST,
+				    EXTCON_PROP_USB_VBUS,
+				    (union extcon_property_value)(int)pr);
+		extcon_set_property(info->edev, EXTCON_USB,
+				    EXTCON_PROP_USB_TYPEC_POLARITY,
+				    (union extcon_property_value)(int)polarity);
+		extcon_set_property(info->edev, EXTCON_USB_HOST,
+				    EXTCON_PROP_USB_TYPEC_POLARITY,
+				    (union extcon_property_value)(int)polarity);
 		extcon_set_property(info->edev, EXTCON_DISP_DP,
 				    EXTCON_PROP_USB_TYPEC_POLARITY,
 				    (union extcon_property_value)(int)polarity);
+		extcon_set_property(info->edev, EXTCON_USB,
+				    EXTCON_PROP_USB_SS,
+				    (union extcon_property_value)(int)mux);
+		extcon_set_property(info->edev, EXTCON_USB_HOST,
+				    EXTCON_PROP_USB_SS,
+				    (union extcon_property_value)(int)mux);
 		extcon_set_property(info->edev, EXTCON_DISP_DP,
 				    EXTCON_PROP_USB_SS,
 				    (union extcon_property_value)(int)mux);
@@ -237,6 +354,8 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
 				    EXTCON_PROP_DISP_HPD,
 				    (union extcon_property_value)(int)hpd);
 
+		extcon_sync(info->edev, EXTCON_USB);
+		extcon_sync(info->edev, EXTCON_USB_HOST);
 		extcon_sync(info->edev, EXTCON_DISP_DP);
 
 	} else if (hpd) {
@@ -322,13 +441,28 @@ static int extcon_cros_ec_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	extcon_set_property_capability(info->edev, EXTCON_USB,
+				       EXTCON_PROP_USB_VBUS);
+	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+				       EXTCON_PROP_USB_VBUS);
+	extcon_set_property_capability(info->edev, EXTCON_USB,
+				       EXTCON_PROP_USB_TYPEC_POLARITY);
+	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+				       EXTCON_PROP_USB_TYPEC_POLARITY);
 	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
 				       EXTCON_PROP_USB_TYPEC_POLARITY);
+	extcon_set_property_capability(info->edev, EXTCON_USB,
+				       EXTCON_PROP_USB_SS);
+	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+				       EXTCON_PROP_USB_SS);
 	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
 				       EXTCON_PROP_USB_SS);
 	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
 				       EXTCON_PROP_DISP_HPD);
 
+	info->dr = DR_NONE;
+	info->pr = false;
+
 	platform_set_drvdata(pdev, info);
 
 	/* Get PD events from the EC */
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 2b16e95..a83f649 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -2904,16 +2904,33 @@ enum usb_pd_control_mux {
 	USB_PD_CTRL_MUX_AUTO = 5,
 };
 
+enum usb_pd_control_swap {
+	USB_PD_CTRL_SWAP_NONE = 0,
+	USB_PD_CTRL_SWAP_DATA = 1,
+	USB_PD_CTRL_SWAP_POWER = 2,
+	USB_PD_CTRL_SWAP_VCONN = 3,
+	USB_PD_CTRL_SWAP_COUNT
+};
+
 struct ec_params_usb_pd_control {
 	uint8_t port;
 	uint8_t role;
 	uint8_t mux;
+	uint8_t swap;
 } __packed;
 
 #define PD_CTRL_RESP_ENABLED_COMMS      (1 << 0) /* Communication enabled */
 #define PD_CTRL_RESP_ENABLED_CONNECTED  (1 << 1) /* Device connected */
 #define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */
 
+#define PD_CTRL_RESP_ROLE_POWER         BIT(0) /* 0=SNK/1=SRC */
+#define PD_CTRL_RESP_ROLE_DATA          BIT(1) /* 0=UFP/1=DFP */
+#define PD_CTRL_RESP_ROLE_VCONN         BIT(2) /* Vconn status */
+#define PD_CTRL_RESP_ROLE_DR_POWER      BIT(3) /* Partner is dualrole power */
+#define PD_CTRL_RESP_ROLE_DR_DATA       BIT(4) /* Partner is dualrole data */
+#define PD_CTRL_RESP_ROLE_USB_COMM      BIT(5) /* Partner USB comm capable */
+#define PD_CTRL_RESP_ROLE_EXT_POWERED   BIT(6) /* Partner externally powerd */
+
 struct ec_response_usb_pd_control_v1 {
 	uint8_t enabled;
 	uint8_t role;
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 3/5] arm64: dts: rockchip: add the aclk_usb3 clocks for USB3.

[Enric Balletbo i Serra]

The aclk_usb3 must be enabled to support USB3 for rk3399.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes since v1:
 - Split the original patch in different commits

 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 17e5e1a..f32e9c4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -397,9 +397,11 @@
 		#size-cells = <2>;
 		ranges;
 		clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
-			 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
+			 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
+			 <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
 		clock-names = "ref_clk", "suspend_clk",
-			      "bus_clk", "grf_clk";
+			      "bus_clk", "aclk_usb3_rksoc_axi_perf",
+			      "aclk_usb3", "grf_clk";
 		status = "disabled";
 
 		usbdrd_dwc3_0: dwc3 {
@@ -425,9 +427,11 @@
 		#size-cells = <2>;
 		ranges;
 		clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
-			 <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>;
+			 <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
+			 <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
 		clock-names = "ref_clk", "suspend_clk",
-			      "bus_clk", "grf_clk";
+			      "bus_clk", "aclk_usb3_rksoc_axi_perf",
+			      "aclk_usb3", "grf_clk";
 		status = "disabled";
 
 		usbdrd_dwc3_1: dwc3 {
-- 
2.9.3

[PATCH v2 4/5] arm64: dts: rockchip: add usb3-phy otg-port support for rk3399.

[Enric Balletbo i Serra]

Add the usb3 phyter for the USB3.0 OTG controller.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes since v1:
 - Split the original patch in different commits

 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index f32e9c4..ea91f25 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -409,8 +409,8 @@
 			reg = <0x0 0xfe800000 0x0 0x100000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
 			dr_mode = "otg";
-			phys = <&u2phy0_otg>;
-			phy-names = "usb2-phy";
+			phys = <&u2phy0_otg>, <&tcphy0_usb3>;
+			phy-names = "usb2-phy", "usb3-phy";
 			phy_type = "utmi_wide";
 			snps,dis_enblslpm_quirk;
 			snps,dis-u2-freeclk-exists-quirk;
@@ -439,8 +439,8 @@
 			reg = <0x0 0xfe900000 0x0 0x100000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
 			dr_mode = "otg";
-			phys = <&u2phy1_otg>;
-			phy-names = "usb2-phy";
+			phys = <&u2phy1_otg>, <&tcphy1_usb3>;
+			phy-names = "usb2-phy", "usb3-phy";
 			phy_type = "utmi_wide";
 			snps,dis_enblslpm_quirk;
 			snps,dis-u2-freeclk-exists-quirk;
-- 
2.9.3

[PATCH v2 2/5] arm64: dts: rockchip: add extcon nodes and enable tcphy.

[Enric Balletbo i Serra]

Enable tcphy and create the cros-ec's extcon node for the USB Type-C port.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
Reviewed-by: Brian Norris <briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
---
Changes since v1:
 - Add the Reviewed-by: Brian Norris

 arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 470105d..03f1950 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -855,6 +855,20 @@ ap_i2c_audio: &i2c8 {
 			compatible = "google,cros-ec-pwm";
 			#pwm-cells = <1>;
 		};
+
+		usbc_extcon0: extcon@0 {
+			compatible = "google,extcon-usbc-cros-ec";
+			google,usb-port-id = <0>;
+
+			#extcon-cells = <0>;
+		};
+
+		usbc_extcon1: extcon@1 {
+			compatible = "google,extcon-usbc-cros-ec";
+			google,usb-port-id = <1>;
+
+			#extcon-cells = <0>;
+		};
 	};
 };
 
@@ -865,6 +879,16 @@ ap_i2c_audio: &i2c8 {
 	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
 };
 
+&tcphy0 {
+	status = "okay";
+	extcon = <&usbc_extcon0>;
+};
+
+&tcphy1 {
+	status = "okay";
+	extcon = <&usbc_extcon1>;
+};
+
 &u2phy0 {
 	status = "okay";
 };
@@ -911,6 +935,7 @@ ap_i2c_audio: &i2c8 {
 
 &usbdrd3_0 {
 	status = "okay";
+	extcon = <&usbc_extcon0>;
 };
 
 &usbdrd_dwc3_0 {
@@ -920,6 +945,7 @@ ap_i2c_audio: &i2c8 {
 
 &usbdrd3_1 {
 	status = "okay";
+	extcon = <&usbc_extcon1>;
 };
 
 &usbdrd_dwc3_1 {
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 2/5] arm64: dts: rockchip: add extcon nodes and enable tcphy.

[Heiko Stübner]

Am Mittwoch, 13. Dezember 2017, 11:32:16 CET schrieb Enric Balletbo i Serra:
> Enable tcphy and create the cros-ec's extcon node for the USB Type-C port.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
> Reviewed-by: Brian Norris <briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

Just for people reading along, with the extcon driver-patch applied,
Enric sent a slightly fixed devicetree series, so we're moving to the v3
patches and ignoring the v2 dts from this series.


Heiko

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 5/5] arm64: dts: rockchip: add pd_usb3 power-domain node for rk3399

[Enric Balletbo i Serra]

Add the usb3 power-domain, its qos area and assign it to the usb device
node.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
---
Changes since v1:
 - Split the original patch in different commits

 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index ea91f25..c18ff88 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -417,6 +417,7 @@
 			snps,dis_u2_susphy_quirk;
 			snps,dis-del-phy-power-chg-quirk;
 			snps,dis-tx-ipgap-linecheck-quirk;
+			power-domains = <&power RK3399_PD_USB3>;
 			status = "disabled";
 		};
 	};
@@ -447,6 +448,7 @@
 			snps,dis_u2_susphy_quirk;
 			snps,dis-del-phy-power-chg-quirk;
 			snps,dis-tx-ipgap-linecheck-quirk;
+			power-domains = <&power RK3399_PD_USB3>;
 			status = "disabled";
 		};
 	};
@@ -995,6 +997,12 @@
 				clocks = <&cru HCLK_SDIO>;
 				pm_qos = <&qos_sdioaudio>;
 			};
+			pd_usb3@RK3399_PD_USB3 {
+				reg = <RK3399_PD_USB3>;
+				clocks = <&cru ACLK_USB3>;
+				pm_qos = <&qos_usb_otg0>,
+					 <&qos_usb_otg1>;
+			};
 			pd_vio@RK3399_PD_VIO {
 				reg = <RK3399_PD_VIO>;
 				#address-cells = <1>;
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/5] extcon: usbc-cros-ec: add support to notify USB type cables.

[Chanwoo Choi]

Hi Enric,

Looks good to me. After reviewing the Lee Jones,
I'll take it on next branch.

Regards,
Chanwoo Choi

On 2017년 12월 13일 19:32, Enric Balletbo i Serra wrote:
> From: Benson Leung <bleung-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
> 
> Extend the driver to notify host and device type cables and the presence
> of power.
> 
> Signed-off-by: Benson Leung <bleung-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
> Reviewed-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> ---
> Changes since v1:
>  - Use the BIT macro. Requested by Lee Jones.
>  - Add the Reviewed-by: Chanwoo Choi.
> 
>  drivers/extcon/extcon-usbc-cros-ec.c | 142 ++++++++++++++++++++++++++++++++++-
>  include/linux/mfd/cros_ec_commands.h |  17 +++++
>  2 files changed, 155 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c
> index 6187f73..6721ab0 100644
> --- a/drivers/extcon/extcon-usbc-cros-ec.c
> +++ b/drivers/extcon/extcon-usbc-cros-ec.c
> @@ -34,16 +34,26 @@ struct cros_ec_extcon_info {
>  
>  	struct notifier_block notifier;
>  
> +	unsigned int dr; /* data role */
> +	bool pr; /* power role (true if VBUS enabled) */
>  	bool dp; /* DisplayPort enabled */
>  	bool mux; /* SuperSpeed (usb3) enabled */
>  	unsigned int power_type;
>  };
>  
>  static const unsigned int usb_type_c_cable[] = {
> +	EXTCON_USB,
> +	EXTCON_USB_HOST,
>  	EXTCON_DISP_DP,
>  	EXTCON_NONE,
>  };
>  
> +enum usb_data_roles {
> +	DR_NONE,
> +	DR_HOST,
> +	DR_DEVICE,
> +};
> +
>  /**
>   * cros_ec_pd_command() - Send a command to the EC.
>   * @info: pointer to struct cros_ec_extcon_info
> @@ -150,6 +160,7 @@ static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info,
>  	pd_control.port = info->port_id;
>  	pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE;
>  	pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE;
> +	pd_control.swap = USB_PD_CTRL_SWAP_NONE;
>  	ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1,
>  				 &pd_control, sizeof(pd_control),
>  				 &resp, sizeof(resp));
> @@ -183,11 +194,72 @@ static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info)
>  	return resp.num_ports;
>  }
>  
> +static const char *cros_ec_usb_role_string(unsigned int role)
> +{
> +	return role == DR_NONE ? "DISCONNECTED" :
> +		(role == DR_HOST ? "DFP" : "UFP");
> +}
> +
> +static const char *cros_ec_usb_power_type_string(unsigned int type)
> +{
> +	switch (type) {
> +	case USB_CHG_TYPE_NONE:
> +		return "USB_CHG_TYPE_NONE";
> +	case USB_CHG_TYPE_PD:
> +		return "USB_CHG_TYPE_PD";
> +	case USB_CHG_TYPE_PROPRIETARY:
> +		return "USB_CHG_TYPE_PROPRIETARY";
> +	case USB_CHG_TYPE_C:
> +		return "USB_CHG_TYPE_C";
> +	case USB_CHG_TYPE_BC12_DCP:
> +		return "USB_CHG_TYPE_BC12_DCP";
> +	case USB_CHG_TYPE_BC12_CDP:
> +		return "USB_CHG_TYPE_BC12_CDP";
> +	case USB_CHG_TYPE_BC12_SDP:
> +		return "USB_CHG_TYPE_BC12_SDP";
> +	case USB_CHG_TYPE_OTHER:
> +		return "USB_CHG_TYPE_OTHER";
> +	case USB_CHG_TYPE_VBUS:
> +		return "USB_CHG_TYPE_VBUS";
> +	case USB_CHG_TYPE_UNKNOWN:
> +		return "USB_CHG_TYPE_UNKNOWN";
> +	default:
> +		return "USB_CHG_TYPE_UNKNOWN";
> +	}
> +}
> +
> +static bool cros_ec_usb_power_type_is_wall_wart(unsigned int type,
> +						unsigned int role)
> +{
> +	switch (type) {
> +	/* FIXME : Guppy, Donnettes, and other chargers will be miscategorized
> +	 * because they identify with USB_CHG_TYPE_C, but we can't return true
> +	 * here from that code because that breaks Suzy-Q and other kinds of
> +	 * USB Type-C cables and peripherals.
> +	 */
> +	case USB_CHG_TYPE_PROPRIETARY:
> +	case USB_CHG_TYPE_BC12_DCP:
> +		return true;
> +	case USB_CHG_TYPE_PD:
> +	case USB_CHG_TYPE_C:
> +	case USB_CHG_TYPE_BC12_CDP:
> +	case USB_CHG_TYPE_BC12_SDP:
> +	case USB_CHG_TYPE_OTHER:
> +	case USB_CHG_TYPE_VBUS:
> +	case USB_CHG_TYPE_UNKNOWN:
> +	case USB_CHG_TYPE_NONE:
> +	default:
> +		return false;
> +	}
> +}
> +
>  static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
>  				       bool force)
>  {
>  	struct device *dev = info->dev;
>  	int role, power_type;
> +	unsigned int dr = DR_NONE;
> +	bool pr = false;
>  	bool polarity = false;
>  	bool dp = false;
>  	bool mux = false;
> @@ -206,9 +278,12 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
>  			dev_err(dev, "failed getting role err = %d\n", role);
>  			return role;
>  		}
> +		dev_dbg(dev, "disconnected\n");
>  	} else {
>  		int pd_mux_state;
>  
> +		dr = (role & PD_CTRL_RESP_ROLE_DATA) ? DR_HOST : DR_DEVICE;
> +		pr = (role & PD_CTRL_RESP_ROLE_POWER);
>  		pd_mux_state = cros_ec_usb_get_pd_mux_state(info);
>  		if (pd_mux_state < 0)
>  			pd_mux_state = USB_PD_MUX_USB_ENABLED;
> @@ -216,20 +291,62 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
>  		dp = pd_mux_state & USB_PD_MUX_DP_ENABLED;
>  		mux = pd_mux_state & USB_PD_MUX_USB_ENABLED;
>  		hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ;
> -	}
>  
> -	if (force || info->dp != dp || info->mux != mux ||
> -		info->power_type != power_type) {
> +		dev_dbg(dev,
> +			"connected role 0x%x pwr type %d dr %d pr %d pol %d mux %d dp %d hpd %d\n",
> +			role, power_type, dr, pr, polarity, mux, dp, hpd);
> +	}
>  
> +	/*
> +	 * When there is no USB host (e.g. USB PD charger),
> +	 * we are not really a UFP for the AP.
> +	 */
> +	if (dr == DR_DEVICE &&
> +	    cros_ec_usb_power_type_is_wall_wart(power_type, role))
> +		dr = DR_NONE;
> +
> +	if (force || info->dr != dr || info->pr != pr || info->dp != dp ||
> +	    info->mux != mux || info->power_type != power_type) {
> +		bool host_connected = false, device_connected = false;
> +
> +		dev_dbg(dev, "Type/Role switch! type = %s role = %s\n",
> +			cros_ec_usb_power_type_string(power_type),
> +			cros_ec_usb_role_string(dr));
> +		info->dr = dr;
> +		info->pr = pr;
>  		info->dp = dp;
>  		info->mux = mux;
>  		info->power_type = power_type;
>  
> -		extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
> +		if (dr == DR_DEVICE)
> +			device_connected = true;
> +		else if (dr == DR_HOST)
> +			host_connected = true;
>  
> +		extcon_set_state(info->edev, EXTCON_USB, device_connected);
> +		extcon_set_state(info->edev, EXTCON_USB_HOST, host_connected);
> +		extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
> +		extcon_set_property(info->edev, EXTCON_USB,
> +				    EXTCON_PROP_USB_VBUS,
> +				    (union extcon_property_value)(int)pr);
> +		extcon_set_property(info->edev, EXTCON_USB_HOST,
> +				    EXTCON_PROP_USB_VBUS,
> +				    (union extcon_property_value)(int)pr);
> +		extcon_set_property(info->edev, EXTCON_USB,
> +				    EXTCON_PROP_USB_TYPEC_POLARITY,
> +				    (union extcon_property_value)(int)polarity);
> +		extcon_set_property(info->edev, EXTCON_USB_HOST,
> +				    EXTCON_PROP_USB_TYPEC_POLARITY,
> +				    (union extcon_property_value)(int)polarity);
>  		extcon_set_property(info->edev, EXTCON_DISP_DP,
>  				    EXTCON_PROP_USB_TYPEC_POLARITY,
>  				    (union extcon_property_value)(int)polarity);
> +		extcon_set_property(info->edev, EXTCON_USB,
> +				    EXTCON_PROP_USB_SS,
> +				    (union extcon_property_value)(int)mux);
> +		extcon_set_property(info->edev, EXTCON_USB_HOST,
> +				    EXTCON_PROP_USB_SS,
> +				    (union extcon_property_value)(int)mux);
>  		extcon_set_property(info->edev, EXTCON_DISP_DP,
>  				    EXTCON_PROP_USB_SS,
>  				    (union extcon_property_value)(int)mux);
> @@ -237,6 +354,8 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
>  				    EXTCON_PROP_DISP_HPD,
>  				    (union extcon_property_value)(int)hpd);
>  
> +		extcon_sync(info->edev, EXTCON_USB);
> +		extcon_sync(info->edev, EXTCON_USB_HOST);
>  		extcon_sync(info->edev, EXTCON_DISP_DP);
>  
>  	} else if (hpd) {
> @@ -322,13 +441,28 @@ static int extcon_cros_ec_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> +	extcon_set_property_capability(info->edev, EXTCON_USB,
> +				       EXTCON_PROP_USB_VBUS);
> +	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
> +				       EXTCON_PROP_USB_VBUS);
> +	extcon_set_property_capability(info->edev, EXTCON_USB,
> +				       EXTCON_PROP_USB_TYPEC_POLARITY);
> +	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
> +				       EXTCON_PROP_USB_TYPEC_POLARITY);
>  	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
>  				       EXTCON_PROP_USB_TYPEC_POLARITY);
> +	extcon_set_property_capability(info->edev, EXTCON_USB,
> +				       EXTCON_PROP_USB_SS);
> +	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
> +				       EXTCON_PROP_USB_SS);
>  	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
>  				       EXTCON_PROP_USB_SS);
>  	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
>  				       EXTCON_PROP_DISP_HPD);
>  
> +	info->dr = DR_NONE;
> +	info->pr = false;
> +
>  	platform_set_drvdata(pdev, info);
>  
>  	/* Get PD events from the EC */
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
> index 2b16e95..a83f649 100644
> --- a/include/linux/mfd/cros_ec_commands.h
> +++ b/include/linux/mfd/cros_ec_commands.h
> @@ -2904,16 +2904,33 @@ enum usb_pd_control_mux {
>  	USB_PD_CTRL_MUX_AUTO = 5,
>  };
>  
> +enum usb_pd_control_swap {
> +	USB_PD_CTRL_SWAP_NONE = 0,
> +	USB_PD_CTRL_SWAP_DATA = 1,
> +	USB_PD_CTRL_SWAP_POWER = 2,
> +	USB_PD_CTRL_SWAP_VCONN = 3,
> +	USB_PD_CTRL_SWAP_COUNT
> +};
> +
>  struct ec_params_usb_pd_control {
>  	uint8_t port;
>  	uint8_t role;
>  	uint8_t mux;
> +	uint8_t swap;
>  } __packed;
>  
>  #define PD_CTRL_RESP_ENABLED_COMMS      (1 << 0) /* Communication enabled */
>  #define PD_CTRL_RESP_ENABLED_CONNECTED  (1 << 1) /* Device connected */
>  #define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */
>  
> +#define PD_CTRL_RESP_ROLE_POWER         BIT(0) /* 0=SNK/1=SRC */
> +#define PD_CTRL_RESP_ROLE_DATA          BIT(1) /* 0=UFP/1=DFP */
> +#define PD_CTRL_RESP_ROLE_VCONN         BIT(2) /* Vconn status */
> +#define PD_CTRL_RESP_ROLE_DR_POWER      BIT(3) /* Partner is dualrole power */
> +#define PD_CTRL_RESP_ROLE_DR_DATA       BIT(4) /* Partner is dualrole data */
> +#define PD_CTRL_RESP_ROLE_USB_COMM      BIT(5) /* Partner USB comm capable */
> +#define PD_CTRL_RESP_ROLE_EXT_POWERED   BIT(6) /* Partner externally powerd */
> +
>  struct ec_response_usb_pd_control_v1 {
>  	uint8_t enabled;
>  	uint8_t role;
> 


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/5] extcon: usbc-cros-ec: add support to notify USB type cables.

[Lee Jones]

> On 2017년 12월 13일 19:32, Enric Balletbo i Serra wrote:
> > From: Benson Leung <bleung@chromium.org>
> > 
> > Extend the driver to notify host and device type cables and the presence
> > of power.
> > 
> > Signed-off-by: Benson Leung <bleung@chromium.org>
> > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> > Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
> > ---
> > Changes since v1:
> >  - Use the BIT macro. Requested by Lee Jones.
> >  - Add the Reviewed-by: Chanwoo Choi.
> > 
> >  drivers/extcon/extcon-usbc-cros-ec.c | 142 ++++++++++++++++++++++++++++++++++-
> >  include/linux/mfd/cros_ec_commands.h |  17 +++++
> >  2 files changed, 155 insertions(+), 4 deletions(-)

> Looks good to me. After reviewing the Lee Jones,
> I'll take it on next branch.

If you take it, you need to send me a pull-request to an immutable
branch.

Acked-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v2 1/5] extcon: usbc-cros-ec: add support to notify USB type cables.

[Chanwoo Choi]

On 2017년 12월 15일 17:14, Lee Jones wrote:
>> On 2017년 12월 13일 19:32, Enric Balletbo i Serra wrote:
>>> From: Benson Leung <bleung-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
>>>
>>> Extend the driver to notify host and device type cables and the presence
>>> of power.
>>>
>>> Signed-off-by: Benson Leung <bleung-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
>>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
>>> Reviewed-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>>> ---
>>> Changes since v1:
>>>  - Use the BIT macro. Requested by Lee Jones.
>>>  - Add the Reviewed-by: Chanwoo Choi.
>>>
>>>  drivers/extcon/extcon-usbc-cros-ec.c | 142 ++++++++++++++++++++++++++++++++++-
>>>  include/linux/mfd/cros_ec_commands.h |  17 +++++
>>>  2 files changed, 155 insertions(+), 4 deletions(-)
> 
>> Looks good to me. After reviewing the Lee Jones,
>> I'll take it on next branch.
> 
> If you take it, you need to send me a pull-request to an immutable
> branch.
> 
> Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> 

Sure. I'll send the immutable branch. Thanks.

-- 
Best Regards,
Chanwoo Choi
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/5] extcon: usbc-cros-ec: add support to notify USB type cables.

[Chanwoo Choi]

On 2017년 12월 15일 17:20, Chanwoo Choi wrote:
> On 2017년 12월 15일 17:14, Lee Jones wrote:
>>> On 2017년 12월 13일 19:32, Enric Balletbo i Serra wrote:
>>>> From: Benson Leung <bleung-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
>>>>
>>>> Extend the driver to notify host and device type cables and the presence
>>>> of power.
>>>>
>>>> Signed-off-by: Benson Leung <bleung-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
>>>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
>>>> Reviewed-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>>>> ---
>>>> Changes since v1:
>>>>  - Use the BIT macro. Requested by Lee Jones.
>>>>  - Add the Reviewed-by: Chanwoo Choi.
>>>>
>>>>  drivers/extcon/extcon-usbc-cros-ec.c | 142 ++++++++++++++++++++++++++++++++++-
>>>>  include/linux/mfd/cros_ec_commands.h |  17 +++++
>>>>  2 files changed, 155 insertions(+), 4 deletions(-)
>>
>>> Looks good to me. After reviewing the Lee Jones,
>>> I'll take it on next branch.
>>
>> If you take it, you need to send me a pull-request to an immutable
>> branch.
>>
>> Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>>
> 
> Sure. I'll send the immutable branch. Thanks.
> 

Dear Lee,

I make the immutable branch (ib-extcon-mfd-4.16)
and send the following pull request.

The following changes since commit 4fbd8d194f06c8a3fd2af1ce560ddb31f7ec8323:

  Linux 4.15-rc1 (2017-11-26 16:01:47 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git ib-extcon-mfd-4.16

for you to fetch changes up to c7eb47f9e45226571be31212f6efd4b307d3b59d:

  extcon: usbc-cros-ec: add support to notify USB type cables. (2017-12-15 17:21:49 +0900)

----------------------------------------------------------------
Benson Leung (1):
      extcon: usbc-cros-ec: add support to notify USB type cables.

 drivers/extcon/extcon-usbc-cros-ec.c | 142 ++++++++++++++++++++++++++++++++++-
 include/linux/mfd/cros_ec_commands.h |  17 +++++
 2 files changed, 155 insertions(+), 4 deletions(-)


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/5] extcon: usbc-cros-ec: add support to notify USB type cables.

[Lee Jones]

On Fri, 15 Dec 2017, Chanwoo Choi wrote:

> On 2017년 12월 15일 17:20, Chanwoo Choi wrote:
> > On 2017년 12월 15일 17:14, Lee Jones wrote:
> >>> On 2017년 12월 13일 19:32, Enric Balletbo i Serra wrote:
> >>>> From: Benson Leung <bleung@chromium.org>
> >>>>
> >>>> Extend the driver to notify host and device type cables and the presence
> >>>> of power.
> >>>>
> >>>> Signed-off-by: Benson Leung <bleung@chromium.org>
> >>>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> >>>> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
> >>>> ---
> >>>> Changes since v1:
> >>>>  - Use the BIT macro. Requested by Lee Jones.
> >>>>  - Add the Reviewed-by: Chanwoo Choi.
> >>>>
> >>>>  drivers/extcon/extcon-usbc-cros-ec.c | 142 ++++++++++++++++++++++++++++++++++-
> >>>>  include/linux/mfd/cros_ec_commands.h |  17 +++++
> >>>>  2 files changed, 155 insertions(+), 4 deletions(-)
> >>
> >>> Looks good to me. After reviewing the Lee Jones,
> >>> I'll take it on next branch.
> >>
> >> If you take it, you need to send me a pull-request to an immutable
> >> branch.
> >>
> >> Acked-by: Lee Jones <lee.jones@linaro.org>
> >>
> > 
> > Sure. I'll send the immutable branch. Thanks.
> > 
> 
> Dear Lee,
> 
> I make the immutable branch (ib-extcon-mfd-4.16)
> and send the following pull request.

Nicely done.  Pulled, thanks.

-- 
Lee Jones
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog